UTZIKO 4" Conduit Punch and Die for Hydraulic Knockout Driver - 4.54" Actual Hole Size
Asin: B0C1Y31L9S | Model: UT-2J-4" | PartNumber: UT-2J-4"
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Standard Thread - Fits Draw Stud Size: 3/4"-16Un.
They Are Designed To Punch Holes In Various Materials, Including Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 6061, 7075, And Other Super Alloys), Fiberglass, Plastic, And More..
Punching Thickness Capacity: 1/8" (10 Ga) Steel, 1/16" Stainless Steel.
Dies Have Laser Engraved Alignment Marks For Easy And Precise Positioning..
Features
- Conduit Hole Size: 4" Conduit Fitting Size: 4" Actual Hole Size: 4.54"
- Dies have laser engraved alignment marks for easy and precise positioning.
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16UN
- Punching Thickness Capacity: 1/8 (10 ga) Steel, 1/16 Stainless Steel
- They are designed to punch holes in various materials, including steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 6061, 7075, and other super alloys), fiberglass, plastic, and more.
- See more on Amazon...
Brand: UTZIKO | Manufacturer: UTZIKO
See On Amazon Similar To UTZIKO 4 Conduit Punch and
#1
UTZIKO Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 1/2 to 2 inch (8T(1/2"-2")) (Integral 1/2"~4")
Asin: B09Y8M6P3V | Model: TPA | PartNumber: TPA
Dies For Easy Slug Removal That Leaves A Round Hole With Clean Edges And A Uniform Size Is Provided On Punch Sizes ½", ¾", 1", 1¼", 1 ½" , 2",2 ½",3", 3 ½" & 4".
Punching Thickness Capacity: 1/8 Inch (11 Ga) Steel, 1/16 Inch Stainless Steel Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only), Fiberglass And Plastic.
Deep Draw Dies That Are Designed With An Optimized Angle On The Cutter Face That Requires Less Force To Make The Cut, Reducing Operator And Tool Fatigue Is Provided On Punch Sizes.
10 Dies For Conduit Fitting Sizes: ½", ¾", 1", 1¼", 1 ½", 2", 2 ½",3", 3 ½", 4" - Complete Kit Comes In A Rugged Storage Case.
Features
- True 12 US ton hydraulic knockout punch with 10 dies. Compatible with GREENLEE and other domestic punch tooling - 3/4-16UN & 7/16-20UN
- 10 dies for conduit fitting sizes: , , 1, 1 , 1 , 2, 2 ,3, 3 , 4 - Complete kit comes in a rugged storage case
- Dies for easy slug removal that leaves a round hole with clean edges and a uniform size is provided on punch sizes , , 1, 1 , 1 , 2,2 ,3, 3 & 4
- Deep Draw dies that are designed with an optimized angle on the cutter face that requires less force to make the cut, reducing operator and tool fatigue is provided on punch sizes
- Punching Thickness Capacity: 1/8 inch (11 ga) Steel, 1/16 inch Stainless Steel Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass and Plastic
- See more on Amazon...
Brand: UTZIKO | Manufacturer: UTZIKO
See On Amazon #2
UTZIKO Manual Knockout Hole Punch Driver Kit 1/2 to 2 inch Electrical Conduit Hole Cutter Set - Professional KO Tool Kit for Precise Conduit Hole Sizes (1/2"~2")
Asin: B0BY8C3NYN | Model: MK-60 | PartNumber: MK-60
Durable And Reliable: Constructed With High-Quality Materials And Engineered For Durability, This Knockout Hole Punch Driver Kit Is Built To Withstand Rigorous Use And Provide Long-Lasting Performance..
Wide Range Of Applications: Ideal For Various Applications, Including Electrical Installations, Pipe Fittings, Construction Projects, And More..
User-Friendly Design: The Long Handle Design Offers Easy Operation And Ergonomic Comfort, Reducing Fatigue During Prolonged Use. The Kit Also Comes With A Compact And Lightweight Toolbox For Convenient Storage And Portability..
Efficient And Clean Punching: The Punches Are Designed To Provide Smooth Operation, Clean Hole Edges, And Uniform Hole Sizes, Ensuring Professional Results. It Effortlessly Punches Through Mild Steel, Aluminum, Fiberglass, And Plastic Materials..
Features
- Accurate Conduit Hole Sizes: This UTZIKO manual knockout hole punch driver kit includes punches and dies for precise conduit hole sizes ranging from 1/2" to 2", allowing you to meet various size requirements with accuracy.
- Efficient and Clean Punching: The punches are designed to provide smooth operation, clean hole edges, and uniform hole sizes, ensuring professional results. It effortlessly punches through mild steel, aluminum, fiberglass, and plastic materials.
- Durable and Reliable: Constructed with high-quality materials and engineered for durability, this knockout hole punch driver kit is built to withstand rigorous use and provide long-lasting performance.
- User-Friendly Design: The long handle design offers easy operation and ergonomic comfort, reducing fatigue during prolonged use. The kit also comes with a compact and lightweight toolbox for convenient storage and portability.
- Wide Range of Applications: Ideal for various applications, including electrical installations, pipe fittings, construction projects, and more.
- See more on Amazon...
Brand: UTZIKO | Manufacturer: UTZIKO
See On Amazon #3
AMZCNC Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 1/2 to 4 inch (15T(1/2"-4"))
Asin: B096TFJCP6 | Ean: 0723616107726 | UPC: 723616107726
Punching Thickness Capacity: 1/8 Inch (10 Ga) Steel Punching Capacity, 1/16 Inch Stainless Steel..
Convenient Operation: The Knockout Set Is Fast And Easy To Operate. With The Excellent Cooperation Of A Drill Bit And A Driving Bolt, You Can Easily Get A Clean And Uniform Hole. And The Long Plastic Handle Ensures Zero Sliding And Effective Force Transfer, Improving Work Efficiency..
Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only), Fiberglass, Plastic.
10 Die Sets For Conduit Fitting Size: ½, ¾, 1, 1¼, 1 ½, 2",2-1/2",3"3-1/2",4" ..
Features
- Powerful 15 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads.
- 10 Die Sets for conduit fitting size: , , 1, 1 , 1 , 2,2-1/2,33-1/2,4 .
- Punching Thickness Capacity: 1/8 inch (10 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.
- Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic
- Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.
- See more on Amazon...
Brand: AMZCNC | Manufacturer: AMZCNC
Dimensions: 6.69 x 19.50 x 9.45 Inches | Weight: 22.00 Kilograms
See On Amazon #4
UTZIKO Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 1/2 to 2 inch (8T(1/2"-2"))
Asin: B09Y8H1DWY | Model: SYK | PartNumber: SYK
Convenient Operation: The Knockout Set Is Fast And Easy To Operate. With The Excellent Cooperation Of A Drill Bit And A Driving Bolt, You Can Easily Get A Clean And Uniform Hole. And The Long Plastic Handle Ensures Zero Sliding And Effective Force Transfer, Improving Work Efficiency..
Wide Application: This Manual Metal Stud Punch Tool Can Be Used For Professional Equipment Drilling, Punching 11 Ga Mild Steel, Iron Plate, And Also Can Be Used For Personal Diy, Furniture Installation, Etc..
Portable Carrying Case: The Stud Punch Tool Is Stored In A Durable Plastic Toolbox That Is Not Easily Broken, Saving Space. It Is Compact, Light-Weight, And Easy To Carry. Besides, It Also Reduces The Possibility Of Missing Parts..
Durable Dies & Punches Set: The Knockout Punch Set Comes With Six Punching Dies(1/2", 3/4", 1", 1-1/4", 1-1/2", And 2"), Drilling Holes From 0.885" To 2.416", Fully Meeting Your Needs. Two Draw Bolts Are Solid And Built To Last. 1/8 Inch (11 Ga) Steel Punching Capacity, 1/16 Inch Stainless Steel..
Features
- Knockout Punch Driver Tool Kit: Standard output pressure: 8 tons. maximum output pressure 12 tons. It is a knockout punch set with a separable hydraulic pump.. It features a good tightness and no oil leakage. With a safety valve, the pressure will release automatically when the pressure reaches the limited max.
- Durable Dies & Punches Set: The knockout punch set comes with six punching dies(1/2, 3/4, 1, 1-1/4, 1-1/2, and 2), drilling holes from 0.885 to 2.416, fully meeting your needs. Two draw bolts are solid and built to last. 1/8 inch (11 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.
- Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.
- Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weight, and easy to carry. Besides, it also reduces the possibility of missing parts.
- Wide Application: This manual metal stud punch tool can be used for professional equipment drilling, punching 11 Ga mild steel, iron plate, and also can be used for personal DIY, furniture installation, etc.
- See more on Amazon...
Brand: UTZIKO | Manufacturer: UTZIKO
Dimensions: 6.70 x 15.70 x 9.45 inches | Weight: 18.70 Pounds
See On Amazon #5
AMZCNC 4" Conduit Punch and Die for Hydraulic Knock Out Driver 3/4"-16UN Thread ((Conduit Hole Size) 4")
Asin: B0B1ZJ7K88 | Model: KKMJ-3JIAO | PartNumber: KKMJ-3JIAO
Standard Thread - Fits Draw Stud Size: 3/4"-16Un.
Made Of Hardened Tool Steel With Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 6061,7075 And Other Super Alloys), Fiberglass, Plastic And More..
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Required Punching Force: 12 Tons.
Features
- Conduit Fitting Size: 4", Actual Hole Size: 4.54"
- Required Punching Force: 12 Tons
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16UN
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 6061,7075 and other super alloys), Fiberglass, Plastic and more.
- See more on Amazon...
Brand: AMZCNC | Manufacturer: AMZCNC
See On Amazon #6
TEMCo THA006 4" Conduit Punch and Die For Hydraulic Knock Out Driver 3/4"-16 Thread
Asin: B07NJ67TNP | Model: THA006 | PartNumber: THA006
Standard Thread - Fits Draw Stud Size: 3/4"-16 (Temco Tha001 And Tha100).
Made Of Hardened Tool Steel With Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Required Punching Force: 13 Us Tons.
Features
- Conduit Fitting Size: 4", Actual Hole Size: 4.5"
- Required Punching Force: 13 US Tons
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16 (TEMCo THA001 and THA100)
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- See more on Amazon...
Brand: Temco | Manufacturer: TEMCo
See On Amazon #7
UTZIKO 1-1/2" Conduit Punch and Die for Hydraulic Knockout Driver - 1.95" Actual Hole Size
Asin: B0C1Y1Y1BQ | Model: UT-2J1-1/2" | PartNumber: UT-2J1-1/2"
Dies Have Laser Engraved Alignment Marks For Easy And Precise Positioning..
They Are Designed To Punch Holes In Various Materials, Including Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 6061, 7075, And Other Super Alloys), Fiberglass, Plastic, And More..
Punching Thickness Capacity: 1/8" (10 Ga) Steel, 1/16" Stainless Steel.
Standard Thread - Fits Draw Stud Size: 3/4"-16Un.
Features
- Conduit Hole Size: 1-1/2" Conduit Fitting Size: 1-1/2" Actual Hole Size: 1.95"
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16UN
- Dies have laser engraved alignment marks for easy and precise positioning.
- Punching Thickness Capacity: 1/8 (10 ga) Steel, 1/16 Stainless Steel
- They are designed to punch holes in various materials, including steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 6061, 7075, and other super alloys), fiberglass, plastic, and more.
- See more on Amazon...
Brand: UTZIKO | Manufacturer: UTZIKO
See On Amazon #8
UTZIKO 1/2" Conduit Punch and Die for Hydraulic Knockout Driver - 0.89" Actual Hole Size
Asin: B0C1Y485LM | Model: UT-2J-1/2" | PartNumber: UT-2J-1/2"
Dies Have Laser Engraved Alignment Marks For Easy And Precise Positioning..
They Are Designed To Punch Holes In Various Materials, Including Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 6061, 7075, And Other Super Alloys), Fiberglass, Plastic, And More..
Punching Thickness Capacity: 1/8" (10 Ga) Steel, 1/16" Stainless Steel.
Standard Thread - Fits Draw Stud Size: 7/16"-20Un.
Features
- Conduit Hole Size: 1/2" Conduit Fitting Size: 1/2" Actual Hole Size: 0.89"
- STANDARD THREAD - Fits Draw Stud Size: 7/16-20UN
- Dies have laser engraved alignment marks for easy and precise positioning.
- Punching Thickness Capacity: 1/8 (10 ga) Steel, 1/16 Stainless Steel
- They are designed to punch holes in various materials, including steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 6061, 7075, and other super alloys), fiberglass, plastic, and more.
- See more on Amazon...
Brand: UTZIKO | Manufacturer: UTZIKO
See On Amazon #9
TEMCo THA116 4" Deep Draw Conduit Punch and Die for Hydraulic Knock Out Driver
Asin: B09Z7GJXG5 | Model: THA116 | PartNumber: THA116
Fits Draw Stud Size: 3/4"-16 (Temco Tha001 And Tha100 Draw Studs).
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Required Punching Force: 13 Us Tons..
Features
- Deep Draw Conduit punch for Fitting Size: 4", Actual Hole Size: 4.5"
- Required Punching Force: 13 US Tons.
- Fits Draw Stud Size: 3/4-16 (TEMCo THA001 and THA100 draw studs)
- Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo
See On Amazon #10
UTZIKO 1" Conduit Punch and Die for Hydraulic Knockout Driver - 1.36" Actual Hole Size
Asin: B0C1Y7D3YM | Model: UT-2J-1" | PartNumber: UT-2J-1"
Dies Have Laser Engraved Alignment Marks For Easy And Precise Positioning..
They Are Designed To Punch Holes In Various Materials, Including Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 6061, 7075, And Other Super Alloys), Fiberglass, Plastic, And More..
Punching Thickness Capacity: 1/8" (10 Ga) Steel, 1/16" Stainless Steel.
Standard Thread - Fits Draw Stud Size: 3/4"-16Un.
Features
- Conduit Hole Size: 1" Conduit Fitting Size: 1" Actual Hole Size: 1.36"
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16UN
- Dies have laser engraved alignment marks for easy and precise positioning.
- Punching Thickness Capacity: 1/8 (10 ga) Steel, 1/16 Stainless Steel
- They are designed to punch holes in various materials, including steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 6061, 7075, and other super alloys), fiberglass, plastic, and more.
- See more on Amazon...
Brand: UTZIKO | Manufacturer: UTZIKO
See On Amazon #11
UTZIKO 3/4" Conduit Punch and Die for Hydraulic Knockout Driver - 1.12" Actual Hole Size
Asin: B0C1Y43LJ6 | Model: UT-2J-3/4" | PartNumber: UT-2J-3/4"
Dies Have Laser Engraved Alignment Marks For Easy And Precise Positioning..
They Are Designed To Punch Holes In Various Materials, Including Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 6061, 7075, And Other Super Alloys), Fiberglass, Plastic, And More..
Punching Thickness Capacity: 1/8" (10 Ga) Steel, 1/16" Stainless Steel.
Standard Thread - Fits Draw Stud Size: 3/4"-16Un.
Features
- Conduit Hole Size: 3/4" Conduit Fitting Size: 3/4" Actual Hole Size: 1.12"
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16UN
- Dies have laser engraved alignment marks for easy and precise positioning.
- Punching Thickness Capacity: 1/8 (10 ga) Steel, 1/16 Stainless Steel
- They are designed to punch holes in various materials, including steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 6061, 7075, and other super alloys), fiberglass, plastic, and more.
- See more on Amazon...
Brand: UTZIKO | Manufacturer: UTZIKO
See On Amazon #12
UTZIKO 3" Conduit Punch and Die for Hydraulic Knockout Driver - 3.54" Actual Hole Size
Asin: B0C1Y3R3RN | Model: UT-2J-3" | PartNumber: UT-2J-3"
Standard Thread - Fits Draw Stud Size: 3/4"-16Un.
They Are Designed To Punch Holes In Various Materials, Including Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 6061, 7075, And Other Super Alloys), Fiberglass, Plastic, And More..
Punching Thickness Capacity: 1/8" (10 Ga) Steel, 1/16" Stainless Steel.
Dies Have Laser Engraved Alignment Marks For Easy And Precise Positioning..
Features
- Conduit Hole Size: 3" Conduit Fitting Size: 3" Actual Hole Size: 3.54"
- Dies have laser engraved alignment marks for easy and precise positioning.
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16UN
- Punching Thickness Capacity: 1/8 (10 ga) Steel, 1/16 Stainless Steel
- They are designed to punch holes in various materials, including steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 6061, 7075, and other super alloys), fiberglass, plastic, and more.
- See more on Amazon...
Brand: UTZIKO | Manufacturer: UTZIKO
See On Amazon #13
UTZIKO 3-1/2" Conduit Punch and Die for Hydraulic Knockout Driver - 4.04" Actual Hole Size
Asin: B0C1Y2YFFH | Model: UT-2J-3-1/2" | PartNumber: UT-2J-3-1/2"
Standard Thread - Fits Draw Stud Size: 3/4"-16Un.
They Are Designed To Punch Holes In Various Materials, Including Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 6061, 7075, And Other Super Alloys), Fiberglass, Plastic, And More..
Punching Thickness Capacity: 1/8" (10 Ga) Steel, 1/16" Stainless Steel.
Dies Have Laser Engraved Alignment Marks For Easy And Precise Positioning..
Features
- Conduit Hole Size: 3-1/2" Conduit Fitting Size: 3-1/2" Actual Hole Size: 4.04"
- Dies have laser engraved alignment marks for easy and precise positioning.
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16UN
- Punching Thickness Capacity: 1/8 (10 ga) Steel, 1/16 Stainless Steel
- They are designed to punch holes in various materials, including steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 6061, 7075, and other super alloys), fiberglass, plastic, and more.
- See more on Amazon...
Brand: UTZIKO | Manufacturer: UTZIKO
See On Amazon #14
UTZIKO 2" Conduit Punch and Die for Hydraulic Knockout Driver - 2.42" Actual Hole Size
Asin: B0C1Y4L5X3 | Model: UT-2J-2" | PartNumber: UT-2J-2"
Dies Have Laser Engraved Alignment Marks For Easy And Precise Positioning..
They Are Designed To Punch Holes In Various Materials, Including Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 6061, 7075, And Other Super Alloys), Fiberglass, Plastic, And More..
Punching Thickness Capacity: 1/8" (10 Ga) Steel, 1/16" Stainless Steel.
Standard Thread - Fits Draw Stud Size: 3/4"-16Un.
Features
- Conduit Hole Size: 2" Conduit Fitting Size: 2" Actual Hole Size: 2.42"
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16UN
- Dies have laser engraved alignment marks for easy and precise positioning.
- Punching Thickness Capacity: 1/8 (10 ga) Steel, 1/16 Stainless Steel
- They are designed to punch holes in various materials, including steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 6061, 7075, and other super alloys), fiberglass, plastic, and more.
- See more on Amazon...
Brand: UTZIKO | Manufacturer: UTZIKO
See On Amazon #15
UTZIKO 2-1/2" Conduit Punch and Die for Hydraulic Knockout Driver - 2.91" Actual Hole Size
Asin: B0C1Y2DX3Z | Model: UT-2J-2-1/2" | PartNumber: UT-2J-2-1/2"
Standard Thread - Fits Draw Stud Size: 3/4"-16Un.
They Are Designed To Punch Holes In Various Materials, Including Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 6061, 7075, And Other Super Alloys), Fiberglass, Plastic, And More..
Punching Thickness Capacity: 1/8" (10 Ga) Steel, 1/16" Stainless Steel.
Dies Have Laser Engraved Alignment Marks For Easy And Precise Positioning..
Features
- Conduit Hole Size: 2-1/2" Conduit Fitting Size: 2-1/2" Actual Hole Size: 2.91"
- Dies have laser engraved alignment marks for easy and precise positioning.
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16UN
- Punching Thickness Capacity: 1/8 (10 ga) Steel, 1/16 Stainless Steel
- They are designed to punch holes in various materials, including steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 6061, 7075, and other super alloys), fiberglass, plastic, and more.
- See more on Amazon...
Brand: UTZIKO | Manufacturer: UTZIKO
See On Amazon #16
UTZIKO 4.2mm Hydraulic Hole Punch Die 4.2mm Electric Hydraulic Hole Punching Die
Asin: B0C1WS1B76 | Model: UT-MHP-DIE-4.2 | PartNumber: UT-MHP-DIE-4.2
Brand: UTZIKO | Manufacturer: UTZIKO
See On Amazon #17
UTZIKO 1-1/4" Conduit Punch and Die for Hydraulic Knockout Driver - 1.7" Actual Hole Size
Asin: B0C1Y3QJBW | Model: UT-2J-1-1/4" | PartNumber: UT-2J-1-1/4"
Dies Have Laser Engraved Alignment Marks For Easy And Precise Positioning..
They Are Designed To Punch Holes In Various Materials, Including Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 6061, 7075, And Other Super Alloys), Fiberglass, Plastic, And More..
Punching Thickness Capacity: 1/8" (10 Ga) Steel, 1/16" Stainless Steel.
Standard Thread - Fits Draw Stud Size: 3/4"-16Un.
Features
- Conduit Hole Size: 1-1/4" Conduit Fitting Size: 1-1/4" Actual Hole Size: 1.7"
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16UN
- Dies have laser engraved alignment marks for easy and precise positioning.
- Punching Thickness Capacity: 1/8 (10 ga) Steel, 1/16 Stainless Steel
- They are designed to punch holes in various materials, including steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 6061, 7075, and other super alloys), fiberglass, plastic, and more.
- See more on Amazon...
Brand: UTZIKO | Manufacturer: UTZIKO
See On Amazon
Looking For Something Else?
Search