ATPEAM A/C Oil and Dye Injector with Snap Quick Coupler 2 OZ Hand Turn Screw-in Air Conditioning Coolant Filling Tube Injection Tool with 1/4'' SAE Connector for R410A R134A R22 R12 Refrigerant System
Asin: B0C23Z283R | Model: AM-0411-01 | PartNumber: AM-0411-01
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Easy Installion】Oil Cylinder Of Refrigerant Oil Injector Is Filled With 2 Ounces Of Refrigeration Oil, Check Valve Screwed Onto Cartridge And Tightened. The Inner And Outer Cylinders Are Tightened Clockwise, And Then A Little 1/4 Sae Threaded Inner Core Is Used To Discharge A Little Air Inside The Blue Tube. Connect The Low-Pressure Port Of The Refrigeration System That Needs To Be Refueled, And Add The Required Amount Of Cooling Oil To The Inner And Outer Cylinders..
【Wide Application】A/C Oil And Dye Injector With Low Side Port Coupler Quick Snap, On 13 Mm Female Connector To R134a Manifold To Work On Car Ac Systems Alike. Compatible With Fluorescent Dyes For Leak Monitoring, All Oil Types(Poe, Or Mineral Oil) And All Home Office Ac And Car Ac Systems..
【Function】Inject Oil/Dye On Low Side With Ac On, Works Great. Makes Oil Injecting Into The R134a R410a R22 R12 System A Breeze. Please Wear Safety Goggles To Avoid Contact With Refrigerant..
【Large Capacity】A/C Oil And Dye Injector Refrigerant Tools With Snap Quick Coupler, 2 Oz Push-In Type With Capacity 1/4 Oz/7.5Ml---2Oz/60Ml. The 1/4 Sae Port With Backflow Protection. One Shot May Cure And Save A Sickened Compressor Caused By Low Oil..
Features
- Premium Quality The air conditioning coolant filling tube injection tool is made of aluminum alloy and brass, with 1/4 inch female connector, making it compatible with most AC systems (if not, use CV23p for some 5/16 inch R410a systems).
- Large Capacity A/C Oil and dye injector refrigerant tools with snap quick coupler, 2 oz push-in type with capacity 1/4 oz/7.5ml---2oz/60ml. The 1/4 SAE port with backflow protection. One shot may cure and save a sickened compressor caused by low oil.
- Easy Installion Oil cylinder of refrigerant oil injector is filled with 2 ounces of refrigeration oil, check valve screwed onto cartridge and tightened. The inner and outer cylinders are tightened clockwise, and then a little 1/4 SAE threaded inner core is used to discharge a little air inside the blue tube. Connect the low-pressure port of the refrigeration system that needs to be refueled, and add the required amount of cooling oil to the inner and outer cylinders.
- Function Inject oil/dye on low side with AC on, works great. Makes oil injecting into the R134A R410A R22 R12 system a breeze. Please wear safety goggles to avoid contact with refrigerant.
- Wide Application A/C oil and dye injector with low side port coupler quick snap, on 13 mm female connector to R134A manifold to work on car AC systems alike. Compatible with fluorescent dyes for leak monitoring, all oil types(POE, or mineral oil) and all home office AC and car AC systems.
- See more on Amazon...
Brand: ATPEAM | Manufacturer: ATPEAM
Warranty: 6 months
See On Amazon Similar To ATPEAM A C Oil and
#1
8MILELAKE Valve Spring Compressor Auto Compression C-Clamp Tool Service Kit for Motorcycle,Car,ATV,and Small Engine Repairs
Asin: B01CQGZHY4 | Model: Valve Tool | PartNumber: Valve Tool | Ean: 0602989775124, 0615200843366, 0700425113407, 0614019657591 | UPC: 700425113407, 615200843366, 602989775124, 614019657591
[Size]--Pusher Sizes: 16Mm,19Mm,23Mm,25Mm,30Mm; Each Collet Length Is 1 & 3/4"; Max Jaw Opening 9-1/2"; Throat Depth 100Mm..
[Packing List]--C-Clamp Tool Service Kit Includes 5* Metal Collects, 3* Extension Screws, 1* C-Frame Compression Bar, 1* Hand Lever, With A Plastc Carry Case..
[Durable Material]--Auto Compression Clamp Tool Made Of Forged Steel Which With High Superior Strength And Hardness, Surface Is Finished With Oxide To Provide Corrosion Resistance..
[Wile Use]--Automotive Compression C-Clamp Tool For Motorcycle, Atv, Car, Small Engine Vehicle Compression Clamp..
Features
- [APPLICATION]--The valve spring compressor is designed to help remove and compress valve spring convenient and safe, close the coil spring compressor until touching the center rod, and insert the compressor into the coil spring. Compress the spring for removal or installation
- [WILE USE]--Automotive compression C-Clamp tool for motorcycle, ATV, car, small engine vehicle compression clamp.
- [SIZE]--Pusher sizes: 16mm,19mm,23mm,25mm,30mm; Each collet length is 1 & 3/4; Max jaw opening 9-1/2; Throat depth 100mm.
- [Durable Material]--Auto compression clamp tool made of forged steel which with high superior strength and hardness, surface is finished with oxide to provide corrosion resistance.
- [Packing List]--C-Clamp tool service kit includes 5* metal collects, 3* extension screws, 1* c-frame compression bar, 1* hand lever, with a plastc carry case.
- See more on Amazon...
Brand: 8MILELAKE | Manufacturer: freebirdtrading
Dimensions: 2.36 x 13.39 x 7.87 inches
See On Amazon #2
ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover (7L)
Asin: B08YJVJFX1 | Ean: 5438077637532
Specificaiton: Color: White; Fluid Extractor Capacity: 7 Liters; Fluid Temperature Range: 35°F- 200°F/1°- 95°C; Polypropylene Hose Diameter: 4Mm / 6Mm / 8Mm / 10Mm (0.157"/0.236"/0.315"/0.393"); Tank Capacity: 7L; Working Pressure: 70-170 Psi.
Wide Application: The Fluid Extractor Is Widely Used To Extract The Engine Oil, Brake Fluid, Atf Fluid, And Other Non-Corrosive And Non-Thick Fluid Of Motorcycles And Vehicles. It Is Perfect For Working On Cars In The Garage Or Automobile Repair Shops..
Easy To Use: You Can Change Engine Oil And Transmission Fluid By Merely Opening The Hood, Inserting An Appropriate Hose To The Bottom Of The Oil Pan. With The Oil Extractor Pump, You No Longer Have To Lift Or Crawl Under The Car To Do Fluid Changing, And There Is No Mess To Clean Afterward..
Four Fluid Extractor Hoses: The Manual Fluid Extractor Comes With Four Suction Hoses To Change Different Sizes For Various Conditions. Along With The Adapter, The Hose Can Reach The Very Bottom Of The Reservoir And Suck Up Every Drop Of Motor Oil..
Features
- 7L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can reach 7 L, which allows you to store more oil and avoid frequent recycling waste oil.
- Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the adapter, the hose can reach the very bottom of the reservoir and suck up every drop of motor oil.
- Specificaiton: Color: White; Fluid Extractor Capacity: 7 liters; Fluid temperature range: 35 F- 200 F/1 - 95 C; polypropylene hose diameter: 4mm / 6mm / 8mm / 10mm (0.157/0.236/0.315/0.393); Tank Capacity: 7L; Working pressure: 70-170 PSI
- Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan. With the oil extractor pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward.
- Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of motorcycles and vehicles. It is perfect for working on cars in the garage or automobile repair shops.
- See more on Amazon...
Brand: ATPEAM | Manufacturer: ATPEAM
Dimensions: 10.00 x 26.00 x 10.00 Inches
See On Amazon #3
ATPEAM Axle & Front Wheel Hub Removal Tool | Front Hub Installer Puller Tool Universal FWD Tools Front Wheel Bearing Puller Auto Hub Puller Tool
Asin: B08YDK8VVT | Ean: 5438077637495
Easy To Use: Use This Hub Grappler On 4, 5, Or 6 Bolt Stud Design And All Non-C Lock Gm Axles. Simply Fasten To Wheel Studs Using Existing Lug Nuts And Tighten Pressure Screw. Make Brake And Bearing Maintenance Easy..
Wide Application: The Hub Puller Tool Is Compatible With Domestic And Imported Vehicles With Independent Front Wheel Suspension, Which Can Be Used On Any Vehicles With Studs That Are Inside The Drum And Has A Tapered Axle And 4-6 Lugs..
Great Function: The Axle Remover & Front Wheel Puller Hub Grappler Tool Makes For Easy Brake And Bearing Maintenance..
Great Design: Yoke And Bolt Of The Axle Bearing Puller Are Threaded 5/8-Inch X 18 Inches To Best Suit Most Vehicle Applications. For Best Results And Longer Utility, Lubricating The Forcing Bolt Before Use Is Strongly Recommended..
Features
- Premium Quality:The drive center hole for the wheel studs of this wheel hub removal tool are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion, the heated pressure screw holds up to tough use.
- Great Design: Yoke and bolt of the axle bearing puller are threaded 5/8-inch x 18 inches to best suit most vehicle applications. For best results and longer utility, lubricating the forcing bolt before use is strongly recommended.
- Easy to Use: Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles. Simply fasten to wheel studs using existing lug nuts and tighten pressure screw. Make brake and bearing maintenance easy.
- Great Function: The Axle Remover & Front Wheel Puller Hub Grappler Tool makes for easy brake and bearing maintenance.
- Wide Application: The hub puller tool is compatible with domestic and imported vehicles with independent front wheel suspension, which can be used on any vehicles with studs that are inside the drum and has a tapered axle and 4-6 lugs.
- See more on Amazon...
Brand: ATPEAM | Manufacturer: ATPEAM
Dimensions: 8.00 x 6.00 x 4.00 Inches
See On Amazon #4
ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover (9L)
Asin: B08YJSYZFH | Ean: 5438077637549
Specificaiton: Color: White; Fluid Extractor Capacity: 9 Liters; Fluid Temperature Range: 35°F- 200°F/1°- 95°C; Polypropylene Hose Diameter: 4Mm / 6Mm / 8Mm / 10Mm (0.157"/0.236"/0.315"/0.393"); Tank Capacity: 9L; Working Pressure: 70-170 Psi.
Wide Application: The Fluid Extractor Is Widely Used To Extract The Engine Oil, Brake Fluid, Atf Fluid, And Other Non-Corrosive And Non-Thick Fluid Of Motorcycles And Vehicles. It Is Perfect For Working On Cars In The Garage Or Automobile Repair Shops..
Easy To Use: You Can Change Engine Oil And Transmission Fluid By Merely Opening The Hood, Inserting An Appropriate Hose To The Bottom Of The Oil Pan. With The Oil Extractor Pump, You No Longer Have To Lift Or Crawl Under The Car To Do Fluid Changing, And There Is No Mess To Clean Afterward..
Four Fluid Extractor Hoses: The Manual Fluid Extractor Comes With Four Suction Hoses To Change Different Sizes For Various Conditions. Along With The Adapter, The Hose Can Reach The Very Bottom Of The Reservoir And Suck Up Every Drop Of Motor Oil..
Features
- 9L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can reach 9L, which allows you to store more oil and avoid frequent recycling waste oil.
- Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the adapter, the hose can reach the very bottom of the reservoir and suck up every drop of motor oil.
- Specificaiton: Color: White; Fluid Extractor Capacity: 9 liters; Fluid temperature range: 35 F- 200 F/1 - 95 C; polypropylene hose diameter: 4mm / 6mm / 8mm / 10mm (0.157/0.236/0.315/0.393); Tank Capacity: 9L; Working pressure: 70-170 PSI
- Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan. With the oil extractor pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward.
- Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of motorcycles and vehicles. It is perfect for working on cars in the garage or automobile repair shops.
- See more on Amazon...
Brand: ATPEAM | Manufacturer: ATPEAM
Dimensions: 10.00 x 26.00 x 10.00 inches
See On Amazon #5
ATPEAM Overhead Valve Spring Compressor | Universal Automotive Engine Removal Repair Install Tool
Asin: B091CRRGD5 | Ean: 5438077638430
Easily Remove Valve Springs In Passenger And Light Commercial Vehicles With This Valve Spring Tool; This Compression Tool Works On Foreign Vehicles, Domestic Vehicles, And Vehicles With Dual Springs And Inner And Outer Springs.
Package: 1 X Overhead Engine Valve Spring Compressor Tool.
Compressing Springs Can Be Difficult And Dangerous, But This Spring Compressor Features Two Different Length Jaws Grips That Easily Attach To The Valve Spring For A Secure Hold On The Part; The Overhead Design Allows You To Easily Attach The Valve Tool To Your Valve Springs Without Having To Take The Cylinder Head From The Vehicle For Quick Removal And Installation.
Constructed Of Quality Carbon Steel Of Our Overhead Engine Valve Spring Compressor Tool For Durability And Longevity; Strong Bearings Provided To Withstand High Force To Easily Compress Springs; Coated With Zinc And Black Oxide, This Valve Compressor Tool Is Resistant To Rust And Corrosion.
Features
- The ATPEAM universal overhead valve spring compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem seal replacement on many cars, vans, & light trucks
- Constructed of quality carbon steel of our overhead engine valve spring compressor tool for durability and longevity; strong bearings provided to withstand high force to easily compress springs; coated with zinc and black oxide, this valve compressor tool is resistant to rust and corrosion
- Easily remove valve springs in passenger and light commercial vehicles with this valve spring tool; This compression tool works on foreign vehicles, domestic vehicles, and vehicles with dual springs and inner and outer springs
- Compressing springs can be difficult and dangerous, but this spring compressor features two different length jaws grips that easily attach to the valve spring for a secure hold on the part; The overhead design allows you to easily attach the valve tool to your valve springs without having to take the cylinder head from the vehicle for quick removal and installation
- Package: 1 x Overhead Engine Valve Spring Compressor Tool
- See more on Amazon...
Brand: ATPEAM | Manufacturer: ATPEAM
Dimensions: 3.00 x 7.00 x 3.00 inches
See On Amazon #6
ATPEAM 22pcs Master Quick Disconnect Tool Kit Ford Fuel Line Disconnect Tool Automotive Ford Transmission Line Disconnect Tool Air Line Removal Tool Compatible with Most Ford Chevy GM Models
Asin: B0915TV94D | Ean: 5438077638164
Works For All Automotive Lines And Hoses: This Transmission Line Disconnect Tool Is Designed For Use With Most Fuel Lines, Air Conditioning Lines, Radiator And Heater Hoses Strong, Light And Durable Aluminum Construction Simple Push-On & Pull-Off Action Popular Sizes 3/16", 3/8", 1/2", 5/8", 3/4" And 7/8"..
Package Included: 6Pcs Transmission Oil Cooler Line Remover, 4Pcs Quick Ac Fuel Line Remover, 7Pcs Fuel Line Remover For Disconnecting 1/4", 5/16", 3/8", 1/2", 5/8", 3/4“ And 7/8" Fuel Line, Scissor Fuel Line Disconnect Tool 4-1/2''..
Fit For Hard To Reach Areas: This Ford Fuel Line Disconnect Tool Offsets For Hard-To-Reach Areas, Fits 5/16", 1/2", 3/8", 5/8", 3/4", 7/8". 4 Colored Quick Ac Fuel Line Quick Disconnector 3/8", 1/2", 5/8" & 3/4"..
A Complete Repair Kit For Ac And Fuel Lines: Our 22Pcs Master Quick Disconnect Tool Kit Is A Comprehensive Kit For Separating Automotive Ac Hose And Fuel Lines, Suitable For A Wide Variety Of Domestic And Foreign Automotive..
Features
- Durable Material: Made of aluminum alloy and plastic steel, this 22pcs fuel air conditioning line disconnect kit is built tough and will go the distance.
- A Complete Repair Kit for AC and Fuel Lines: Our 22pcs master quick disconnect tool kit is a comprehensive kit for separating automotive ac hose and fuel lines, suitable for a wide variety of domestic and foreign automotive.
- Works for All Automotive Lines and Hoses: This transmission line disconnect tool is designed for use with most fuel lines, air conditioning lines, radiator and heater hoses strong, light and durable aluminum construction Simple push-on & pull-off action Popular sizes 3/16, 3/8, 1/2, 5/8, 3/4 and 7/8.
- Fit for Hard to Reach Areas: This ford fuel line disconnect tool offsets for hard-to-reach areas, fits 5/16, 1/2, 3/8, 5/8, 3/4, 7/8. 4 colored quick ac fuel line quick disconnector 3/8, 1/2, 5/8 & 3/4.
- Package Included: 6pcs transmission oil cooler line remover, 4pcs quick AC fuel line remover, 7pcs fuel line remover for disconnecting 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 and 7/8 fuel line, scissor fuel line disconnect tool 4-1/2''.
- See more on Amazon...
Brand: ATPEAM | Manufacturer: ATPEAM
Dimensions: 3.00 x 12.00 x 9.00 Inches
See On Amazon
Looking For Something Else?
Search