8 Inch/203mm Hole Saw Heavy Duty Bi-Metal HSS Hole Saw for Cornhole Boards, Plywood, Iron Board, Acrylic, Ducts, Ceiling Lights, Cinder Wall
Asin: B0C27LF4GZ
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.★ Chip Removal Design - Side Holes Around The Hole Opener Are Used To Remove Debris, Ensuring Smooth Cleaning And Fast Cutting..
★ Size - Cutting Diameter Is 8" / 203Mm, Opening Depth Is 1/2" / 30Mm.
★ Wide Range Of Applications - Drilling On Drywall, Acrylic, Plywood, Wood, Plastic, Thin Metal And On..
★ Convenient And Efficient - Double Metal Strips And Hss Teeth Can Be Sharp And Quick Opening, Reducing The Opening Time. Heavy Duty Hexagonal Center Shaft For Use With Any 1/2" Electric Drill, No Restrictions..
Features
- Material - M42 high speed steel and BI metal, with high wear resistance and high toughness, and higher hardness, increased service life.
- Convenient and efficient - double metal strips and HSS teeth can be sharp and quick opening, reducing the opening time. Heavy duty hexagonal center shaft for use with any 1/2 electric drill, no restrictions.
- Chip removal design - side holes around the hole opener are used to remove debris, ensuring smooth cleaning and fast cutting.
- Wide range of applications - drilling on drywall, acrylic, plywood, wood, plastic, thin metal and on.
- Size - cutting diameter is 8 / 203mm, opening depth is 1/2 / 30mm
- See more on Amazon...
Brand: CPROSP | Manufacturer: CPROSP
See On Amazon Similar To 8 Inch 203mm Hole Saw
#1
KATA 6PCS Hole Saw Kit 1-1/4" to 2-1/8"(32-54mm) Hole Saw Set in Case with Mandrels and Hex Key for Soft Wood, PVC Board, Plywood
Asin: B0BCG733FZ | Ean: 0709226603285 | UPC: 709226603285
【Fast And Clean】: Smoothly Finish,Sharp Teeth Reduces Resistance During Cutting And Allows Fast And Clean Cuts..
【Lifetime Guarantee】: Your Satisfaction Is The Most Important Thing To Us. We Try Our Best To Ensure Each Product Is In Perfect Condition Before You Get It, But If Something Is Not Up To Your Satisfaction, Please Contact Us For A Full Refund Or Replacement..
【Common Size】:Included Most Common Sizes For Home And Work Demand, 4Pcs Hole Saws 1-1/4" (32Mm), 1-1/2" (38Mm), 2“(51Mm), 2-1/8" (54Mm), 1Pc 1/4" Hole Saw Mandrel And 1Pc Hex Key; The Cutting Depth Is About 25 Mm..
【Multi-Purpose】: Suitable For Soft Wood, Thin Pvc Panel And Thin Plywood,But Not For Metal And Hard Wood.Excellent Tool For Home Diy-Easy To Switch Different Cutting Sizes..
Features
- SAFETY AND DURABLE : High quality heat-treated carbon steel with black coating surface, allows for a more aggressive cut,anti-rust and durable.
- MULTI-PURPOSE : Suitable for soft wood, thin PVC panel and thin plywood,but not for metal and hard wood.Excellent tool for home DIY-Easy to switch different cutting sizes.
- FAST AND CLEAN : Smoothly finish,sharp teeth reduces resistance during cutting and allows fast and clean cuts.
- COMMON SIZE :Included most common sizes for home and work demand, 4PCS hole saws 1-1/4 (32mm), 1-1/2 (38mm), 2 (51mm), 2-1/8 (54mm), 1PC 1/4 hole saw mandrel and 1PC hex key; The cutting depth is about 25 mm.
- LIFETIME GUARANTEE : Your satisfaction is the most important thing to us. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
- See more on Amazon...
Brand: KATA | Manufacturer: KATA TOOLS
See On Amazon #2
Hole Saw Set HYCHIKA 19 Pcs Hole Saw Kit with 3/4"-6"(19-152mm) 13Pcs Saw Blades, 2 Mandrels, 2 Drill Bits, 1 Installation Plate, 1 Hex Key, Ideal for Soft Wood, Plywood, Drywall, PVC
Asin: B07Y1G2Y7K | Model: HS17B | PartNumber: HS17B | Ean: 0632111630069 | UPC: 632111630069
🌟【Wide Applications】 Hychika Saw Blades Are Durable And Reliable To Use On Workpieces, Suitable For Cork Board, Thin Pvc Board, Plastic. Not For Hard Metal, Hard Wood Or Density Board. Not For Use For Cutting Depths Beyond 1"(25Mm)..
🌟【What You Get】13 X Hychika Hole Saw Blades, 2 X Mandrels, 2 X Drill Bits, 1 X Hex Key, 1 X Installation Plate, 1 X Storage Box, 1 X User Manual. Hychika Provides 12-Months Warranty, If You Have Any Questions About Our Products, Please Feel Free To Contact Us..
🌟【Personalized Recommendation】If You Need To Cut Hardwood/Metal, We Are Proud To Recommend Our Hychika Bi-Metal Hole Saw Kit (B086sqwzk5). If You Need More Help, Please Feel Free To Contact Us!.
🌟【Convenient Storage】Hole Saw Kit Wood Comes With A Sturdy And Small Storage Box, Which Is Very Convenient To Store And Easy To Carry..
🌟【High Quality & Fast Cutting】The Hole Saw Drill Bit Cutter Blades Are Carbon Steel And Heat Treated, With Black Surface, Ensure Fast Cutting, Rustproof, Wear-Resistant And Long Usage Life..
Features
- 19 PCS ACCESSORIES HYCHIKA Hole saw kit Including 13pcs size saw blades: 19mm, 22mm, 28mm, 32mm, 38mm, 44mm, 51mm, 64mm, 76mm, 89mm, 102mm, 127mm, 152mm, max cutting depth of 25mm, 2pcs mandrels, 2pcs drill bits for easy replacement, 1pc installation plate, 1pc hex key.
- HIGH QUALITY & FAST CUTTING The hole saw drill bit cutter blades are carbon steel and heat treated, with black surface, ensure fast cutting, rustproof, wear-resistant and long usage life.
- WIDE APPLICATIONS HYCHIKA Saw blades are durable and reliable to use on workpieces, suitable for cork board, thin PVC board, plastic. Not for hard metal, hard wood or density board. Not for use for cutting depths beyond 1(25mm).
- CONVENIENT STORAGE Hole saw kit wood comes with a sturdy and small storage box, which is very convenient to store and easy to carry.
- WHAT YOU GET 13 x HYCHIKA Hole Saw Blades, 2 x Mandrels, 2 x Drill Bits, 1 x Hex Key, 1 x Installation Plate, 1 x Storage Box, 1 x User Manual. HYCHIKA provides 12-months warranty, If you have any questions about our products, please feel free to contact us.
- PERSONALIZED RECOMMENDATION If you need to cut hardwood/metal, we are proud to recommend our HYCHIKA Bi-Metal Hole Saw Kit (B086SQWZK5). If you need more help, please feel free to contact us!
- See more on Amazon...
Brand: HYCHIKA BETTER TOOLS FOR BETTER LIFE | Manufacturer: HYCHIKA BETTER TOOLS FOR BETTER LIFE
Dimensions: 0.10 x 9.80 x 8.80 inches | Weight: 3.40 Pounds
See On Amazon #3
KATA Hole Saw Set 20PCS Hole Saw Kit with 3/4"-6"(19-152mm) 13PCS Saw Blades, 2 Mandrels, 3 Drill Bits, 1 Installation Plate, 1 Hex Key, Ideal for Soft Wood, Plywood, Drywall, PVC
Asin: B08JCHY2DM | Ean: 0768894424684 | UPC: 768894424684
【Wide Application】 Upgraded Design With Ultra Sharp Serrations For Faster And Cleaner Cutting, Which Is Ideal For Softwood, Plywood, Plastic Plate, Plasterboard And Thin Pvc Board.Great For Tasks Of Cutting Multiple Hole Sizes From Small To Large In Desk Surfaces, Doors And Furniture..
【Warmly Tips】 Can Be Used With A Standard Electric Drill, Impact Drill, If You Need Very Precise Holes, Please Use A Saw Machine, Not Suit For Hard Metal, Hard Wood Or Density Board. Not For Use For Cutting Depths Beyond About 1"(25Mm)..
【Solid Storage Case】 The Set Comes With A Customized Heavy Duty Case For Portability. Designated Slots In The Case Keep Every Piece In Place. Improve Work Efficiency..
【High And Professional Quality】 Made Of Premium Heat Treated Carbon Steel,Black Coating With Oil, Rust-Proof And Wear-Resistant, Very Easy To Put Together The Set With The Drill, Ultra Sharp Serrations For High-Performance, Faster And Cleaner Cutting..
Features
- Package Includes KATA hole saw kit includes 13pcs saw blades, 3/4" (19mm), 7/8" (22mm), 1-1/8" (29mm), 1-1/4" (32mm), 1-1/2" (38mm), 1-3/4" (44mm), 2" (51mm), 2-1/2" (64mm), 3" (76mm), 3-1/2" (89mm), 4" (102mm), 5" (127mm), 6"(152mm), 2 mandrels, 3 drill bits, 1 hex key, 1 installation plate.
- High and Professional Quality Made of premium heat treated carbon steel,black coating with oil, rust-proof and wear-resistant, very easy to put together the set with the drill, ultra sharp serrations for high-performance, faster and cleaner cutting.
- Wide Application Upgraded design with ultra sharp serrations for faster and cleaner cutting, which is ideal for softwood, plywood, plastic plate, plasterboard and thin PVC board.Great for tasks of cutting multiple hole sizes from small to large in desk surfaces, doors and furniture.
- Solid Storage Case The set comes with a customized heavy duty case for portability. Designated slots in the case keep every piece in place. Improve work efficiency.
- Warmly Tips Can be used with a standard electric drill, impact drill, If you need very precise holes, please use a saw machine, not suit for hard metal, hard wood or density board. Not for use for cutting depths beyond about 1(25mm).
- See more on Amazon...
Brand: KATA | Manufacturer: KATA TOOLS
Dimensions: 2.36 x 9.40 x 9.05 Inches | Weight: 3.12 pounds
See On Amazon #4
Bi-Metal Hole Saw Kit, HYCHIKA 17 Pcs High Speed Steel 3/4" to 2-1/2" Hole Saw Set in Case with Mandrels, Hole Saw Bit, Hole Saw for Thin Metal, Hard Wood, Drilling PVC Board, and Plastic Plate
Asin: B086SQWZK5 | Model: HS13B | PartNumber: HS13B | Ean: 0763571395929 | UPC: 763571395929
🌟【11 Hole Saws And 6 Accessories】 Including 11Pcs Size Saw Blades: 19Mm, 22Mm, 25Mm, 29Mm, 35Mm, 38Mm, 44Mm, 51Mm, 57Mm, 60Mm, 68Mm, Max Cutting Depth Of 40Mm, 2Pcs Mandrels, 3Pcs Drill Bits For Easy Replacement, 1Pc Hex Key..
🌟【What You Get】11 X Hychika Bi-Metal Hole Saw Blades, 2 X Mandrels, 3 X Drill Bits, 1 X Hex Key, 1 X Storage Box, 1 X User Manual.
🌟【Various Choices】If You Only Need To Cut Cork Boards, Thin Pvc Boards, Drywall And Plywood, And Do Not Need To Cut Hardwood, Metal, We Are Proud To Recommend Another Product Of Hychika 19 Pcs Hole Saw Kit (B07y1g2y7k).
🌟【Wide Applications & Convenient Storage】 The Hychika Hole Saws Are Durable And Reliable To Use On Workpieces, Suitable For Hole Cutting On Soft Metal, Wood, Pvc Board, Plastic, Gypsum Board; Comes With A Sturdy And Small Storage Box, Which Is Very Convenient To Store And Easy To Carry..
🌟【High Precision & Fast Cutting】The Tooth Of The Saws Has Been Optimized And Improved Many Times, Higher Cutting Efficiency, Cleaner And Smoother Cutting, Higher Precision; The Chip Removal Groove Added On The Side Of The Hole Saw Can Discharge The Chip Rapidly..
Features
- BI-METAL & HIGH QUALITY The HYCHIKA saw blades are made of bimetallic material, the cutting part is made of high hardness (69~81HRC), high strength hard alloy steel, 2 mm thick. The product has the advantages of wear resistance, better toughness and long usage life.
- HIGH PRECISION & FAST CUTTING The tooth of the saws has been optimized and improved many times, higher cutting efficiency, cleaner and smoother cutting, higher precision; the chip removal groove added on the side of the hole saw can discharge the chip rapidly.
- 11 HOLE SAWS AND 6 ACCESSORIES Including 11pcs size saw blades: 19mm, 22mm, 25mm, 29mm, 35mm, 38mm, 44mm, 51mm, 57mm, 60mm, 68mm, max cutting depth of 40mm, 2pcs mandrels, 3pcs drill bits for easy replacement, 1pc hex key.
- WIDE APPLICATIONS & CONVENIENT STORAGE The HYCHIKA hole saws are durable and reliable to use on workpieces, suitable for hole cutting on soft metal, wood, PVC board, plastic, gypsum board; comes with a sturdy and small storage box, which is very convenient to store and easy to carry.
- WHAT YOU GET 11 x HYCHIKA Bi-Metal Hole Saw Blades, 2 x Mandrels, 3 x Drill Bits, 1 x Hex Key, 1 x Storage Box, 1 x User Manual
- VARIOUS CHOICES If you only need to cut cork boards, thin PVC boards, drywall and plywood, and do not need to cut hardwood, metal, we are proud to recommend another product of HYCHIKA 19 Pcs Hole Saw Kit (B07Y1G2Y7K)
- See more on Amazon...
First Available: 02/09/2023
Brand: HYCHIKA BETTER TOOLS FOR BETTER LIFE | Manufacturer: HYCHIKA BETTER TOOLS FOR BETTER LIFE
Dimensions: 0.10 x 9.64 x 8.85 inches
See On Amazon #5
Lenox Tools Bi-Metal Speed Slot Arbored Hole Saw with T3 Technology, 1-13/16"
Asin: B004YK8DMY | Model: 1772779 | PartNumber: 1772779 | Ean: 0885363002720 | UPC: 885363002720
Optimized Tooth Design Penetrates Metal With Ease.
Larger, Sharper Teeth For Faster Cutting.
Increased Wall Thickness Improves Durability And Minimizes Tooth Loss.
Features
- 2X More Durable With 50% Longer Life Than Previous Lenox Hole Saws
- Increased Wall Thickness Improves Durability And Minimizes Tooth Loss
- Optimized Tooth Design Penetrates Metal With Ease
- Larger, Sharper Teeth For Faster Cutting
- See more on Amazon...
Brand: Lenox | Manufacturer: Lenox Tools
Dimensions: 2.70 x 5.70 x 3.30 inches | Weight: 0.40 Pounds
See On Amazon #6
AUTOTOOLHOME 2 inch (50mm) Metal Steel Hole Saw Tooth Carbide Tip TCT Drill Bits Kit for Thick Metal Wood
Asin: B01MA19KNY | Model: 00443 | PartNumber: 00443 | Ean: 0600682480949 | UPC: 600682480949
Dimension:Cutting Diameter：2 Inch(50Mm), Cutting Depth: 1 Inch, Shank Diameter: 3/8 Inch，Can Drill About 3/4 Inch Depth For The Wood, And Can Drill About 3/16 Inch Thickness For The Matel.
Carbide Teeth For Fast Cutting Of Clean, Round Holes.Driling With Stainless Steel Plate,High Alloy Steel,Iron,Aluminum,Castings,Plastic,Metal,Wood,Etc.Note: Cannot Be Used For Concrete, Tiles And Stone..
The Hole Saw Has A Twist Drill Bit Inside, Which Is Drill Guide.If The Pilot Bits Is Broken, It Can Be Disassembled And Replaced, Using The Allen Wrench In The Package.
The Cutter Tooth Is Made From Yg8 Tungsten Carbide Steel And The Rigidity Varies From 64Hrc To 65Hrc.Rust Proof, Sturdy And Durable.
Features
- This TCT metal hole saw is suitable for hand held electric drill, beach drill,stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
- The cutter tooth is made from YG8 tungsten carbide steel and the rigidity varies from 64HRC to 65HRC.rust proof, sturdy and durable
- Dimension:Cutting diameter 2 inch(50mm), Cutting Depth: 1 inch, Shank diameter: 3/8 inch Can drill about 3/4 inch depth for the wood, and can drill about 3/16 inch thickness for the matel
- The hole saw has a twist drill bit inside, which is drill guide.If the pilot bits is broken, it can be disassembled and replaced, using the Allen wrench in the package
- Carbide teeth for fast cutting of clean, round holes.Driling with stainless steel plate,high alloy steel,iron,aluminum,castings,plastic,metal,wood,etc.Note: Cannot be used for concrete, tiles and stone.
- See more on Amazon...
Brand: AUTOTOOLHOME | Manufacturer: JYC International Trade Co., Ltd.
Dimensions: 0.10 x 3.50 x 2.00 inches | Weight: 0.48 Pounds
See On Amazon #7
Milwaukee 49-22-4029 Tool HOLE DOZER Bi-Metal Hole Saw Set (17-Piece) with Case
Asin: B07KPXPGZS | Model: 49-22-4029 | PartNumber: 49-22-4029 | Ean: 0045242535507 | UPC: 045242535507
Plug Jack Provides An All-Access Slot Design For Fast Plug Removal.
Bi-Metal Construction With 8% Cobalt For Increased Wear Resistance.
Rip Guard Offers Exceptionally Strong Tooth Form With Added Steel Behind Cutting Edge.
Features
- The kit comes with 17 hole saw blades in 9 sizes: 3/4 inch, 7/8 inch, 1-1/8 inch, 1-3/8 inch, 1-1/2 inch, 2 inch, 2-1/8 inch, 2-1/4 inch and 2-1/2 inch with Case
- Rip Guard offers exceptionally strong tooth form with added steel behind cutting edge
- Plug Jack provides an all-access slot design for fast plug removal
- Bi-metal construction with 8% cobalt for increased wear resistance
- See more on Amazon...
Brand: Milwaukee | Manufacturer: Milwaukee
Dimensions: 3.00 x 9.00 x 9.00 inches | Weight: 4.20 Pounds
See On Amazon #8
Milwaukee 49-56-9290 10 PC BIG HAWG Hole Saw w/Carbide Teeth Kit New
Asin: B07DYTKJ37 | Model: 49-56-9290 | PartNumber: 49-56-9290 | Ean: 0045242500758, 0696498573289 | UPC: 696498573289, 045242500758
Type: Hole Saw, Kit.
Upc: 045242500758.
Brand: Milwaukee | Manufacturer: Milwaukee
Dimensions: 4.25 x 4.25 x 2.44 inches | Weight: 0.01 Pounds
See On Amazon #9
PETUOL Hole Saw Set, 22PCS Hole Saw Kit with 3/4" to 5" (19mm-127mm) 13Pcs Saw Blades, Mandrels, Installation Plate, Drill Bits, Hex Key with Storage Box, Ideal for Soft Wood, Plywood, Drywall, PVC
Asin: B086D57RPK | Ean: 0658906650951 | UPC: 658906650951
Easy To Install: Quickly And Easily Replace All Tools Needed For The Saw. The Set Included Hex Wrench And Mounting Plate For Tool Installation..
Portable Storage Case: The Set Comes With A Customized Case For Portability. Designated Slots In The Case Keep Every Piece In Place. Keep Fittings Tidy And Improve Work Efficiency. Perfect Gift For Father’S Day!.
Wide Application Scenarios: Upgraded Design With Ultra-Sharp Serrations For Faster And Cleaner Cutting, Which Is Ideal For Softwood, Plastic Plate, Plasterboard And Thin Pvc Board. The Cutting Depth Is About 25 Mm..
Professional Quality: Made Of Premium Heat-Treated Carbon Steel With Anti-Oil And Anti-Rust Features For High Performance, Anti-Rust, Durability, And Longer Service Life. Not Hard Metal Suitable Or Hard Materials!.
Features
- PACKAGE INCLUDES: Hole saw kit includes 13pcs saw blades, 3/4" (19mm), 7/8" (22mm), 1"(25mm), 1-1/8" (28mm), 1-1/4" (32mm),1-1/2" (38mm),1-3/4" (44mm), 2" (51mm),2-1/2" (64mm), 3in(76mm), 3-1/2" (89mm), 3.9" (101mm), 5" (127mm) 2x Mandrels, 2x Drill Bits, 2 x Twist drill, 1 x Hex Key, 1x Package Box Installation Plate and Hex Key with Storage Box.
- PROFESSIONAL QUALITY: Made of premium heat-treated carbon steel with anti-oil and anti-rust features for high performance, anti-rust, durability, and longer service life. Not hard metal suitable or hard materials!
- EASY TO INSTALL: Quickly and easily replace all tools needed for the saw. The set included hex wrench and mounting plate for tool installation.
- WIDE APPLICATION SCENARIOS: Upgraded design with ultra-sharp serrations for faster and cleaner cutting, which is ideal for softwood, plastic plate, plasterboard and thin PVC board. The cutting depth is about 25 mm.
- PORTABLE STORAGE CASE: The set comes with a customized case for portability. Designated slots in the case keep every piece in place. Keep fittings tidy and improve work efficiency. Perfect gift for Father s Day!
- See more on Amazon...
Brand: PETUOL | Manufacturer: PETUOL
Dimensions: 1.90 x 8.60 x 6.20 inches
See On Amazon #10
VIKITON 8 Inch Hole Saw with Arbor for Metal Wood Plastic, 8 in Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal Lighter and Portable
Asin: B0CG95T7NC
【Lighter And Portable】After The Structural Upgrade, The Product Quality Remains The Same, But The Weight Is Reduced By 50%, The Use Is More Labor-Saving, And The Chip Removal Is More Convenient..
【Wide Application】The Hole Saw Can Be Widely Used For Cutting Wood, Plater Board, Plywood, Duct, Drywall, Soft Plaster, Corn Hole Boards And Plastic, Good Enough For The Average Diyer And Professional Project..
【Attention】The Hole Saw Can't Drill Hole In Glass Ceramic Concrete. Adding Coolant Or Water Is Even Better When Drilling Metal..
【Easy To Use】Rotate The Arbor And Hole Saw Until It's Very Close (Don't Need Tight), Then Line Up The Locking Pins With The Hole At The Hole Saw And Screw Them Tightly..
【Sharp And Durable】This Hole Saw Is Of Bi-Metal Construction With High Speed Steel Saw Teeth And Special Flexible Steel Saw Body For Longer Life And Sharper Edges..
Features
- Package Include 8 in hole saw, 1 pc arbor(with 1 drill bit), 1 pc drill bit for replacement, 1 pc hex key.
- Sharp and Durable This hole saw is of bi-metal construction with high speed steel saw teeth and special flexible steel saw body for longer life and sharper edges.
- Lighter and Portable After the structural upgrade, the product quality remains the same, but the weight is reduced by 50%, the use is more labor-saving, and the chip removal is more convenient.
- Easy to Use Rotate the arbor and hole saw until it's very close (don't need tight), then line up the locking pins with the hole at the hole saw and screw them tightly.
- Wide Application The hole saw can be widely used for cutting wood, plater board, plywood, duct, drywall, soft plaster, corn hole boards and plastic, good enough for the average DIYer and professional project.
- Attention The hole saw can't drill hole in glass ceramic concrete. Adding coolant or water is even better when drilling metal.
- See more on Amazon...
Brand: VIKITON | Manufacturer: VIKITON
Dimensions: 2.00 x 8.00 x 8.00 Inches
See On Amazon #11
HYCHIKA Hole Saw Set with Case, 19 Pieces Hole Saw Bit with 3/4-5inch Saw Blades, 2 Mandrels,2 Drill Bits,1 Installation Plate,1 Hex Key, Hole Saw Kit for Soft Wood, Plywood, Drywall, PVC
Asin: B0BBM27CFK | Model: HS17K | PartNumber: HS17K | Ean: 0763571395981 | UPC: 763571395981
🧰【Wide Application】 Hole Saw Set Suitable For Softwood, Plywood, Plastic Board, Gypsum Board And Thin Pvc Board, It Can Meet The Difficult Task Of Cutting Multiple Hole Sizes From Small To Large For Different Applications Such As Table Tops, Doors And Furniture. But Not For Metal And Hardwood, Perfect For Home Diy..
🧰【Portable Storage Box】 Hychika Drilling Kit Comes With A Customized Blow-Molded Tool Box. Designated Slots In The Box Hold Each Accessory In Place. Improves Work Efficiency. The Perfect Gift For Christmas!.
🎁【What You Get】Carbon Steel Hole Saw Bit Includes 13 Sizes Of Saw Blades:3/4" (19Mm), 7/8" (22Mm), 1''(25Mm),1-1/8" (29Mm), 1-1/4" (32Mm), 1-1/2" (38Mm), 1-3/4" (44Mm), 2" (51Mm), 2-1/2" (64Mm), 3" (76Mm), 3-1/2" (89Mm), 4" (102Mm), 5" (127Mm)Maximum Cutting Depth Of 25Mm, 2 Mandrels(3/8",1/4"), 1 Drill Bit, 1 Hex Key, 1 Installation Plate, And 1 Storage Box..
🧰【Efficient Cutting】: Unique Tooth Design Makes The Hole More Precise And Smooth, Carbon Steel Teeth Provide Fast And Clean Cutting. High Precision And Good Impact And Wear Resistance. Designed With Circular Spiral Chip Removal Grooves To Remove Chips In All Directions..
Features
- 19Pcs Hole Saw Kit Made of high quality heat-treated carbon steel with black oxide finish, rust and wear resistant, long life, very easy to assemble with drill bits (compatible with most brands of drill bits) for faster, cleaner cuts.
- Efficient Cutting : Unique tooth design makes the hole more precise and smooth, carbon steel teeth provide fast and clean cutting. High precision and good impact and wear resistance. Designed with circular spiral chip removal grooves to remove chips in all directions.
- Wide Application Hole saw set suitable for softwood, plywood, plastic board, gypsum board and thin PVC board, it can meet the difficult task of cutting multiple hole sizes from small to large for different applications such as table tops, doors and furniture. But not for metal and hardwood, perfect for home DIY.
- What You Get Carbon steel hole saw bit includes 13 sizes of saw blades:3/4 (19mm), 7/8 (22mm), 1''(25mm),1-1/8 (29mm), 1-1/4 (32mm), 1-1/2 (38mm), 1-3/4 (44mm), 2 (51mm), 2-1/2 (64mm), 3 (76mm), 3-1/2 (89mm), 4 (102mm), 5 (127mm)maximum cutting depth of 25mm, 2 mandrels(3/8,1/4), 1 drill bit, 1 hex key, 1 installation plate, and 1 storage box.
- Portable Storage Box HYCHIKA drilling kit comes with a customized blow-molded tool box. Designated slots in the box hold each accessory in place. Improves work efficiency. The perfect gift for Christmas!
- See more on Amazon...
Brand: HYCHIKA BETTER TOOLS FOR BETTER LIFE | Manufacturer: HYCHIKA BETTER TOOLS FOR BETTER LIFE
Dimensions: 8.23 x 2.20 x 6.02 Inches | Weight: 2.54 Pounds
See On Amazon #12
HORUSDY 19pcs Hole Saw Kit, Hole Saw Set with Saw Blades 6"(152mm) -3/4" (19mm), Ideal for Soft Wood, PVC Board and More
Asin: B082KNKJ5G
High-Density Sharp Sawtooth, Cutting Faster And Cleaner. Ideal For Cork, Plastic Board, Gypsum Board And Thin Pvc Board. This Product Is Not Suitable For Hard Metal, Hardwood And Mdf..
Hole Saw Set Includes 13 X Hole Saw Blades, 2 X Mandrels, 2 X Drill Bits, 1 X Hex Key, 1 X Installation Plate, 1 X Storage Box..
Hole Saw Kit Comes In A Sturdy Box For Easy Storage And Organization. Easy To Carry. Designated Slots In The Case Keep Every Piece In Place, Improve Work Efficiency.
Hole Saw Kit Includes 13Pcs Saw Blades, The Maximum Size Is 6" (152Mm), The Minimum Is 3/4" (19Mm), With 25Mm Cutting Depth, Meet Various Demand..
Features
- Made of high-quality carbon steel with heat treatment and blackening treatment, which has the advantages of high performance, oil resistance, rust resistance, durability and long life.
- Hole saw kit includes 13pcs saw blades, the maximum size is 6 (152mm), the minimum is 3/4 (19mm), with 25mm cutting depth, meet various demand.
- High-density sharp sawtooth, cutting faster and cleaner. Ideal for cork, plastic board, gypsum board and thin PVC board. This product is not suitable for hard metal, hardwood and MDF.
- Hole saw kit comes in a sturdy box for easy storage and organization. Easy to carry. Designated slots in the case keep every piece in place, Improve work efficiency
- Hole Saw Set Includes 13 x Hole Saw Blades, 2 x mandrels, 2 x drill bits, 1 x hex key, 1 x installation plate, 1 x Storage Box.
- See more on Amazon...
Brand: HORUSDY | Manufacturer: HORUSDY
Dimensions: 2.90 x 9.70 x 8.90 inches
See On Amazon #13
XDOVET Bi-Metal Hole Saw Kit, 10 PC General Purpose 3/4" to 2-1/2" Set with Case. Used for Precise Drilling On Metal, Wood, Plastic, and Doors. Durable High-Speed Steel
Asin: B0CBJFRXZX
[High Precision And Fast Cutting ] The Tooth Of The Saws Has Been Optimized And Improved Many Times, Higher Cutting Efficiency, Cleaner And Smoother Cutting, Higher Precision; The Chip Removal Groove Added On The Side Of The Hole Saw Can Discharge The Chip Rapidly..
[Xdovet Service] We Are Committed To Providing You With Good Products And Excellent Service .If You Find Any Problems When You Use It, Feel Free To Contact With Us. We Would Try Our Best To Assist You And Ensure..
[Wide Application] Sharp Serration Perfect For Hole Cutting On Metal, Wood, Pvc Board, Plastic And Drywall, Clean And Smooth Cut, High Precision..
[Package Includes] Bi-Metal Hole Saw Kit Contains 10 Pcs Size Saw Blades: 19Mm (0.74 In), 22Mm ( 0.86 In), 29M (1.14 In), 35Mm (1.37 In), 38 (1.49 In),44Mm (1.73 In), 51Mm (2 In), 54Mm (2.12 In), 57Mm (2.24 In), 64Mm (2.51 In), Max Cutting Depth Of 38Mm, 1 Big Arobr (With Drill Bit),1 Small Arobr (With Drill Bit) ,1 Drill Bit For Replacement And 1 Hex Key.10 Accessories To Meet All Your Needs..
Features
- [High quality and safety] HSS bi-metal hole saws are much better than and totally different from any carbon steel ones (Carbon Steel, work on wood only, no metal), much more durable and can offer a up to 50% longer life, great heat resistance.
- [Package Includes] Bi-Metal Hole Saw Kit contains 10 pcs size saw blades: 19mm (0.74 in), 22mm ( 0.86 in), 29m (1.14 in), 35mm (1.37 in), 38 (1.49 in),44mm (1.73 in), 51mm (2 in), 54mm (2.12 in), 57mm (2.24 in), 64mm (2.51 in), max cutting depth of 38mm, 1 big arobr (with drill bit),1 small arobr (with drill bit) ,1 drill bit for replacement and 1 hex key.10 accessories to meet all your needs.
- [High precision and fast cutting ] The tooth of the saws has been optimized and improved many times, higher cutting efficiency, cleaner and smoother cutting, higher precision; the chip removal groove added on the side of the hole saw can discharge the chip rapidly.
- [Wide application] Sharp serration perfect for hole cutting on metal, wood, PVC board, plastic and drywall, clean and smooth cut, high precision.
- [XDOVET service] We are committed to providing you with good products and excellent service .If you find any problems when you use it, feel free to contact with us. We would try our best to assist you and ensure.
- See more on Amazon...
Brand: XDOVET | Manufacturer: XDOVET
See On Amazon #14
Luckyway 17-Piece Hole Saw Kit, Hole Saw Set, 3/4" to 5" Hole Saw with Hole Saw Mandrel for Wood,Plastic,PVC and Drywall
Asin: B083LMZSM2 | Model: T0004169A | PartNumber: T0004169A | Ean: 0719209435604 | UPC: 719209435604
Material - Made Of High Carbon Steel, Black Oxidation Treatment On The Surface, Advantages Of High-Performance, Rust Protection And Durable And Long Working Life..
The Wide Slots Placed Low On Each Hole Saw And Multiple Leverage Points To Make It Easy To Work Plugs Out With A Screwdriver..
Features - The Unique Tooth Profile Design Makes The Hole More Precise And Smooth, And The Carbon Steel Teeth Provide Fast And Clean Cutting. High Precision, Good Impact Wear Resistance..
Application - Suitable For Softwood, Plastic Board, Plasterboard, Thin Pvc Board. Not Suitable For Hard Metal, Hardwood, Density Board.For Use With Corded And Cordless Drills.The Deepest Cutting Depth Is 25Mm..
Features
- DIMENSIONS - Hole Saw Kit Include 13 hole saws with the size of 3/4"(19mm), 7/8"(22mm), 1 (25mm), 1-1/8"(29mm), 1-1/4"(32mm), 1-1/2"(38mm), 1-3/4 (44mm), 2"(51mm), 2-1/2"(64mm), 3"(76mm), 3-1/2"(89mm), 4"(102mm), 5"(127mm), 2 mandrels, 1 hex key, 1 installation plate.
- APPLICATION - Suitable for softwood, plastic board, plasterboard, thin PVC board. NOT suitable for hard metal, hardwood, density board.For use with corded and cordless drills.The deepest cutting depth is 25mm.
- MATERIAL - Made of high carbon steel, Black oxidation treatment on the surface, advantages of high-performance, rust protection and durable and long working life.
- FEATURES - The unique tooth profile design makes the hole more precise and smooth, and the carbon steel teeth provide fast and clean cutting. High precision, good impact wear resistance.
- The wide slots placed low on each hole saw and multiple leverage points to make it easy to work plugs out with a screwdriver.
- See more on Amazon...
Brand: Luckyway | Manufacturer: Zhenjiang Luckyway Tools Co.,Ltd
See On Amazon #15
EZARC Carbide Hole Saw Heavy Duty, Hole Cutter for Stainless Steel, Sheet Metal 7/8'' 22mm
Asin: B01I416Q90 | Model: 804016 | PartNumber: 804016 | Ean: 0611553063239 | UPC: 611553063239
Spring Loaded Pilot Bit For Fast Drilling And Clean Plug Ejection..
All In One Design: Pilot Drill Bit, Spring, Wrench Are Included, No Need To Buy Any Extra Accessories For The Cutting..
Carbide Teeth Cut Over 500 Holes Through Stainless Steel. Up To 10X Longer Cutting Life Vs Standard Bi-Metal Hole Saws..
Cuts Stainless Steel, Mild Steel, Iron, Copper And Brass Sheet..
Features
- Carbide Hole Cutter precisely cuts material up to 3/16 in. thick.
- Cuts stainless steel, mild steel, iron, copper and brass sheet.
- Spring loaded pilot bit for fast drilling and clean plug ejection.
- Carbide teeth cut over 500 holes through stainless steel. Up to 10x longer cutting life vs standard bi-metal hole saws.
- All in one design: pilot drill bit, spring, wrench are included, no need to buy any extra accessories for the cutting.
- See more on Amazon...
Brand: EZARC | Manufacturer: EZARC
Dimensions: 1.38 x 1.97 x 4.53 inches | Weight: 0.24 pounds
See On Amazon #16
Lenox Tools Bi-Metal Speed Slot Arbored Hole Saw with T3 Technology, 1-1/2" - 1772729
Asin: B0052EDHLS | Model: 1772729 | PartNumber: 1772729 | Ean: 0885363002645 | UPC: 885363002645
Optimized Tooth Design Penetrates Metal With Ease.
Speed Slot Staircase Design For Easy Plug Ejection.
Larger, Sharper Teeth For Faster Cutting.
Increased Wall Thickness Improves Durability And Minimizes Tooth Loss.
Features
- 2X more durable with 50% longer life than previous LENOX hole saws
- Increased wall thickness improves durability and minimizes tooth loss
- Optimized tooth design penetrates metal with ease
- Larger, sharper teeth for faster cutting
- SPEED SLOT staircase design for easy plug ejection
- See more on Amazon...
Brand: Lenox | Manufacturer: Lenox Tools
Dimensions: 6.10 x 1.80 x 2.50 inches | Weight: 0.28 pounds
See On Amazon #17
Lenox Tools 1772429 7/8-Inch 14A Bi-Metal Speed Slot Arbored Hole Saw, Red
Asin: B0052EDINA | Model: 1772429 | PartNumber: 1772429 | Ean: 0885363002539 | UPC: 885363002539
Optimized Tooth Design Penetrates Metal With Ease.
Speed Slot Staircase Design For Easy Plug Ejection.
Larger, Sharper Teeth For Faster Cutting.
Increased Wall Thickness Improves Durability And Minimizes Tooth Loss.
Features
- 2X more durable with 50% longer life than previous LENOX hole saws
- Increased wall thickness improves durability and minimizes tooth loss
- Optimized tooth design penetrates metal with ease
- Larger, sharper teeth for faster cutting
- SPEED SLOT staircase design for easy plug ejection
- See more on Amazon...
Brand: Lenox | Manufacturer: Lenox Tools
Dimensions: 1.70 x 6.43 x 2.50 Inches | Weight: 0.00 Pounds
See On Amazon #18
Luckyway 3-Piece Hole Saw Mandrel,Fit 3/4-Inch to 6-Inch Diameter,Including 7/16-Inch and 3/8 Inch Shank Hole Saw Arbor and 3-Piece 1/4 Inch HSS(M2) Central Drills
Asin: B07VZ97CJ6 | Model: ZY-EJ-AGIG-73 | PartNumber: ZY-EJ-AGIG-73 | Ean: 0719209435451 | UPC: 719209435451
Material - 45 Carbon Steel For Arbor, High Speed Steel(M2) For Central Drill..
Works Smoothly Every Time Without Worry Of Rusting Or Corrosion Slowing Or Sticking The Operation..
Features - Pins Lock The Saw To Prevent Over Tightening And Prevent Threads From Stripping..
Application - This Hole Saw Arbor Fit Most Brand 3/4 To 6 Inches Hole Saw Such As Dewalt, Bosch, Milwaukee, Cle-Line Etc. As Long As The Hole Saw Can Fit 1/2 Thread With 2 Pins..
Features
- DIMENSIONS - include 1pc 3/8 inch hex shank arbor with central drill, 1pc 7/16 inch hex shank arbor with central drill, 1pc HSS(M2) central drill.
- APPLICATION - This hole saw arbor fit most brand 3/4 to 6 inches hole saw such as Dewalt, Bosch, milwaukee, Cle-Line etc. As long as the hole saw can fit 1/2 thread with 2 pins.
- MATERIAL - 45 carbon steel for arbor, high speed steel(M2) for central drill.
- FEATURES - Pins lock the saw to prevent over tightening and prevent Threads from Stripping.
- Works smoothly every time without worry of rusting or corrosion slowing or sticking the operation.
- See more on Amazon...
Brand: Luckyway | Manufacturer: Zhenjiang Luckyway Tools Co.,Ltd
See On Amazon #19
Chaoos12Pcs TCT Carbide Hole Saw Kit, Metal Cutting Hole Saw, Including 5/8" to 2-1/10" Tungsten Carbide Tipped Hole Cutter Set, Suitable for Metal, Stainless Steel, Wood, Iron, Plastic
Asin: B0B96D8Q3J | Model: TCT hole saw kit | PartNumber: TCT hole saw kit | Ean: 0641320852483 | UPC: 641320852483
【Upgrade Design】- Upgraded Tct Hole Saw Teeth Designed With Three-Blade：Inner Blade, Middle Blade, Outer Blade. This Designed Tip Tooth Blade, Delivers A Smooth Quickly And Accurately Cutting And Ensured Perfect Cutting Quality. Tipped Tooth Blade,Faster Cutting Experience. Process Improvements Make The Product Drain Better, Faster Heat Dissipation, And Smoother..
【Suitable For Multiple Tools】- The Carbide Hole Saw Set Apply To Bench Drill, Gun Drill, Magnetic Drill, Drill Percussion Etc. Perfect For Hard Metal, Stainless Steel Plate, Cast Iron, Square Tube, Iron, Wood, F.R.P And Other General Sheet Metal. Note: Cannot Be Used For Stone Concrete Glass Stone And Tiles. Burrs On The Edges When Used On Wooden Materials. For Safety Purposes, Remember To Add Coolant During Continuous High-Speed Drilling. Please Wear Protective Goggles And Gloves When Using Hole Saw Set..
【After Salse Guarantee】- We Provide One-Year After-Sales Guarantee For Tct Hole Saw Kit. Risk-Free Shopping. If You Have Any Questions During Use This Tct Carbide Kit, You Can Contact Us Via Amazon Customer Service Or Q&A , We Will Reply Within 12 Hours. Customer Satisfaction Is Our Tireless Pursuit..
【High Quality】- The Hole Saw Kit For Metal With Carbide Tipped Teeth And 3/8” 3-Flatted Shank Allowing A Strong And Steady Chuck Grip For Heavy Duty Hole Cutting. Tct Carbide Teeth Cut Clean Round Holes Quickly And With High Precision Every Time.The Steel Hole Saw Boast Exceptional Sharpness, Durability, And Wear-Resistance, Impact-Resistance..
【Hole Saw Size】- The Carbide Hole Saw Cutting Diameters Are Respectively: 16Mm(5/8"), 18Mm(7/10"), 20Mm(4/5"), 22Mm(7/8"), 25Mm(1"), 30Mm(1-9/50"), 35Mm(1-19/50"), 45Mm(1-4/5"), 50Mm(2"), 53Mm(2-1/10"),Cutting Length: 25Mm(1 In), Shank Dia: 10Mm(2/5 In) . The Hole Saw Kit Is Ideal For Quickly And Accurately Cutting Metal Materials..
Features
- Package Include - The TCT hole saw kit includes 10 * hole saws drills, 1 * enter replacement drill bit , 1 * hex spanners and all the drills are packed in an sturdy aluminum box.
- Hole Saw Size - The carbide hole saw cutting diameters are respectively: 16mm(5/8), 18mm(7/10), 20mm(4/5), 22mm(7/8), 25mm(1), 30mm(1-9/50), 35mm(1-19/50), 45mm(1-4/5), 50mm(2), 53mm(2-1/10),Cutting Length: 25mm(1 in), Shank Dia: 10mm(2/5 in) . The hole saw kit is ideal for quickly and accurately cutting metal materials.
- Upgrade Design - Upgraded TCT hole Saw teeth designed with three-blade inner blade, middle blade, outer blade. This designed tip tooth blade, delivers a smooth quickly and accurately cutting and ensured perfect cutting quality. Tipped tooth blade,faster cutting experience. Process improvements make the product drain better, faster heat dissipation, and smoother.
- High Quality - The hole saw kit for metal with carbide tipped teeth and 3/8 3-Flatted shank allowing a strong and steady chuck grip for heavy duty hole cutting. TCT carbide teeth cut clean round holes quickly and with high precision every time.The steel hole saw boast exceptional sharpness, durability, and wear-resistance, impact-resistance.
- Suitable for multiple tools - The carbide hole saw set apply to Bench drill, Gun drill, Magnetic drill, Drill percussion etc. Perfect for hard metal, stainless steel plate, cast iron, square tube, iron, wood, F.R.P and other general sheet metal. NOTE: Cannot be used for stone concrete Glass stone and tiles. Burrs on the edges when used on wooden materials. For safety purposes, remember to add coolant during continuous high-speed drilling. Please wear protective goggles and gloves when using hole saw set.
- After Salse Guarantee - We provide One-Year After-Sales Guarantee for TCT hole saw kit. Risk-free shopping. If you have any questions during use this TCT carbide kit, you can contact us via amazon customer service or Q&A , We will reply within 12 hours. Customer satisfaction is our tireless pursuit.
- See more on Amazon...
Brand: Chaoos | Manufacturer: Chaoos
Weight: 4.16 pounds
See On Amazon
Looking For Something Else?
Search