CDHPOWER 2" Cup Crank Set Bottom Bracket Set, Bicycle Conversion Kit 128mm Mountain Road Bike
Asin: B0C2CHPFZ5 | Ean: 0725764194061 | UPC: 725764194061
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fits On Most Bikes Such As Beach Cruiser, Lowrider, Chopper Bike Frames.
Measure The Diameter Of Bottom Bracket Shell Before Shopping, If It Is Exactly 2", Then Bottom Bracket Bearings Set Should Fit..
Package Including: 1 Set Bb Bottom Bracket Kit (Bb Cup , Axle).
Axle Length: 128Mm, Cup Size: 51.1Mm, Ball Retainer: 5/16 X 9, 68Mm, 24 Tpi,Width Of Center Axle Is 19Mm.
Material: Steel. Fits On All Normal Bikes Such As Beach Cruiser, Lowrider, Chopper Bike. Do Not Fits On Gas Motorized Bicycle!.
Features
- 2" Cup Bottom Bracket Set, Bottom Bracket Cup Set Bearings Included, Cruiser part, Silver part
- Material: steel. Fits on all normal bikes such as beach cruiser, lowrider, chopper bike. Do not fits on gas motorized bicycle!
- Fits on most bikes such as beach cruiser, lowrider, chopper bike frames
- Axle Length: 128mm, Cup Size: 51.1mm, Ball Retainer: 5/16 x 9, 68mm, 24 tpi,width of center axle is 19mm
- Measure the diameter of bottom bracket shell before shopping, if it is exactly 2, then bottom bracket bearings set should fit.
- Package including: 1 set BB Bottom Bracket Kit (bb cup , axle)
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
Weight: 0.33 pounds
See On Amazon Similar To CDHPOWER 2 Cup Crank Set
#1
Alta Bicycle Bottom Bracket Cup Set for 3-Piece Cranksets 1.37x24 tpi (Chrome)
Asin: B07MHXRGQH | Ean: 0810012130752 | UPC: 810012130752
Sold As Complete Set (5Pcs).
In Chrome & Black.
Brand: Alta | Manufacturer: F & R Cycle Inc.
See On Amazon #2
CDHPOWER 36T Wide Crank Assembly-3pcs,for 2-Stroke and 4-Stroke Motor Gas Motorized Bicycle 48cc/66cc/80cc
Asin: B07ZJ8L8PS | Model: crank-TWO | PartNumber: crank-TWO | Ean: 0762021968317 | UPC: 762021968317
Wide Cranks Are Required For 4-Stroke And Pull Start Bicycle Engine Kits 66Cc/80Cc/49Cc.
Any Questions,Please Contact Us Firstly! We Can Help You Solve The Problem Until You Are Satisfied..
The Length Of The Pedal Crank Shaft Is About 266Mm/10.47Inch.
This Part Allows You To Convert A 1 Piece Crank Into A 3 Piece Crank; Compatible With 9/16 Inch Pedals. Will Not Be Compatible With Micargi Beach Cruiser's Stock Pedals..
Features
- CDHPOWER Wide Crank w/ 36T Sprocket;Be used on 26" cruiser style frame; Crank arm length: 165mm
- This part allows you to convert a 1 piece crank into a 3 piece crank; Compatible with 9/16 inch pedals. Will not be compatible with Micargi Beach Cruiser's stock pedals.
- Wide cranks are required for 4-stroke and pull start bicycle engine kits 66cc/80cc/49cc
- The length of the pedal crank shaft is about 266mm/10.47inch
- Any questions,please contact us firstly! we can help you solve the problem until you are satisfied.
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #3
CDH Conversion Kit Crank Set Bottom Bracket and BB Bottom Bracket Conversion Kit - Gas Motorized Bicycle
Asin: B0C1431R4P | Ean: 0725764435249 | UPC: 725764435249
Also Can Be Used On 2 Stroke 66Cc/80Cc Motorized Bicycle(Pls Measure Yours Bb Before Shopping), The Length Of The Crank Is 266Mm/10.47Inch..
Black Bb Bottom Bracket Conversion Kit (American To Euro). Converting A Non-Threaded 68Mm American Bb Shell To An English Threaded Euro Bb Bottom Bracket.
Package Include: 1 Set Conversion Kit, 1Pc Bb Bottom Bracket.
This Conversion Kit End Up As/With A Square Taper;The Crank Of Kit Is Same As The Crank That Comes With The 4 Stroke Gas Motor Kit(If Your 4 Stroke Gas Motorized Bicycle Was Installed With Original Cranks, You Can Shopping Without Doubt, If Not Same Cranks, Pls Measure Yours Bb Before Shopping);.
Compatible With 44Mm(Outer Diameter) Bottom Bracket; Outer Diameter Of 2 Cups: 34.5Mm/1.358 Inch Which Is Compatible With 44Mm Od Bottom Bracket.
Features
- The Conversion Kit/Crank Set is NOT compatible with 2 inch/50mm-51mm(inner diameter) BOTTOM BRACKET
- Compatible with 44mm(Outer Diameter) bottom bracket; Outer diameter of 2 cups: 34.5mm/1.358 inch which is compatible with 44mm OD bottom bracket
- Also can be used on 2 stroke 66cc/80cc motorized bicycle(pls measure yours BB before shopping), the length of the crank is 266mm/10.47inch.
- This conversion kit end up as/with a square taper;the crank of kit is same as the crank that comes with the 4 stroke gas motor kit(if your 4 stroke gas motorized bicycle was installed with original cranks, you can shopping without doubt, if not same cranks, pls measure yours BB before shopping);
- Black BB Bottom Bracket Conversion Kit (American to Euro). Converting a non-threaded 68mm American BB shell to an English threaded Euro BB bottom bracket
- Package include: 1 set conversion kit, 1pc BB bottom bracket
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
Weight: 1.30 pounds
See On Amazon #4
CDHPOWER 2" Cup Bicycle/Bike Bottom Bracket Bearings Set for ONE Piece Crankset, Bottom Bracket Cup Set
Asin: B0BJJX1KZ7 | Ean: 0725889968813 | UPC: 725889968813
For One-Piece Crank ,Material: Steel, Threads Size Of The Cup Is 15/16 Inch*24.
2" Cup Bottom Bracket Set, One-Piece Bottom Bracket Cup Set Bearings Included, Silver.
Fits On Most Bikes Such As Beach Cruiser, Lowrider,Chopper Bike Frames.
Measure The Diameter Of Bottom Bracket Shell Before Shoping, If It Is Exactly 2", Then Bottom Bracket Bearings Set Should Fit..
Features
- Bearings and cups for one-piece crank
- Measure the diameter of bottom bracket shell before shoping, if it is exactly 2, then bottom bracket bearings set should fit.
- For one-piece crank ,Material: steel, Threads size of the cup is 15/16 inch*24
- Fits on most bikes such as beach cruiser, lowrider,chopper bike frames
- 2 Cup Bottom Bracket Set, One-Piece Bottom Bracket Cup Set Bearings Included, Silver
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
Weight: 0.33 pounds
See On Amazon #5
266mm Conversion Kit Crank Set Bottom Bracket for Bicycle Bike Bottom Bracket - Gas Motorized Bicycle
Asin: B0BG762NJQ | Ean: 0725889968370 | UPC: 725889968370
Also Can Be Used On 2 Stroke 66Cc/80Cc Motorized Bicycle(Pls Measure Yours Bb Before Shopping), The Length Of The Crank Is 266Mm/10.47Inch..
This Conversion Kit End Up As/With A Square Taper;The Crank Of Kit Is Same As The Crank That Comes With The 4 Stroke Gas Motor Kit(If Your 4 Stroke Gas Motorized Bicycle Was Installed With Original Cranks, You Can Shopping Without Doubt, If Not Same Cranks, Pls Measure Yours Bb Before Shopping);.
Compatible With 44Mm(Outer Diameter) Bottom Bracket; Outer Diameter Of 2 Cups: 34.5Mm/1.358 Inch Which Is Compatible With 44Mm Od Bottom Bracket (Refer To The Fourth Picture).
Features
- The Conversion Kit/Crank Set is NOT compatible with 2 inch/50mm-51mm(inner diameter) BOTTOM BRACKET(refer to the third picture)
- Compatible with 44mm(Outer Diameter) bottom bracket; Outer diameter of 2 cups: 34.5mm/1.358 inch which is compatible with 44mm OD bottom bracket (refer to the Fourth picture)
- Also can be used on 2 stroke 66cc/80cc motorized bicycle(pls measure yours BB before shopping), the length of the crank is 266mm/10.47inch.
- This conversion kit end up as/with a square taper;the crank of kit is same as the crank that comes with the 4 stroke gas motor kit(if your 4 stroke gas motorized bicycle was installed with original cranks, you can shopping without doubt, if not same cranks, pls measure yours BB before shopping);
- See more on Amazon...
Manufacturer: cdhpower
Weight: 1.30 pounds
See On Amazon #6
Sunlite Bottom Bracket Cup Set for 3-Piece Cranksets, 68/73mm
Asin: B0010VZFSK | Model: 2221M | PartNumber: 2221M | Ean: 0072774022212 | UPC: 072774022212
English Type.
Includes Right And Left Cup, Lockring And Bearings.
Features
- Fits 3-piece crank set
- Includes right and left cup, lockring and bearings
- English type
- See more on Amazon...
Brand: Sunlite | Manufacturer: SUNLITE
Dimensions: 1.00 x 4.65 x 2.45 inches | Weight: 0.32 pounds
See On Amazon #7
Sunlite Sealed Bottom Bracket Cup Set for 3-Piece Cranksets, 68/73mm
Asin: B000AO7HD4 | Model: 2280 | PartNumber: 2280 | Ean: 0072774022809 | UPC: 072774022809
English Type.
Includes Right And Left Cup, Lockring And Bearings.
Features
- Fits 3-piece crank set
- Includes right and left cup, lockring and bearings
- English type
- See more on Amazon...
Brand: Sunlite | Manufacturer: SUNLITE
Dimensions: 1.70 x 4.65 x 3.00 inches | Weight: 0.29 pounds
See On Amazon #8
CDHPOWER Bicycle BB Cup Ball Bearing Kit,2" Cup Crank Set Bottom Bracket Set
Asin: B0BTKDY45G | Model: CDHCDI01 | PartNumber: CDHCDI01 | Ean: 0725889714847 | UPC: 725889714847
The Bottom Bracket Is Made Of Metal, High Strength And Long-Lasting, Solid And Durable For You To Use. Measure The Diameter Of Bottom Bracket Shell Before Shopping, If It Is Exactly 2", Then Bottom Bracket Bearings Set Should Fit..
Axle Length: 128Mm, Cup Size: 51.1Mm, Ball Retainer: 5/16 X 9, 68Mm, 24 Tpi,Width Of Center Axle Is 19Mm.
Diy 2 Inch Bb Cup Set; Material: Steel;.
Fits On Most Bikes Such As Beach Cruiser, Lowrider, Chopper Bike Frames, Non-Motorized Bicycle.
Features
- 2" Cup Bottom Bracket Set, Bottom Bracket Cup Set Bearings Included,Silver
- Fits on most bikes such as beach cruiser, lowrider, chopper bike frames, non-motorized bicycle
- The bottom bracket is made of metal, high strength and long-lasting, solid and durable for you to use. Measure the diameter of bottom bracket shell before shopping, if it is exactly 2, then bottom bracket bearings set should fit.
- DIY 2 inch BB cup set; Material: steel;
- Axle Length: 128mm, Cup Size: 51.1mm, Ball Retainer: 5/16 x 9, 68mm, 24 tpi,width of center axle is 19mm
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #9
CDHPOWER YD85CC Replacement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke 85CC
Asin: B0D2PTLZHX | Ean: 0725764211829 | UPC: 725764211829
Bore And Stroke: 52Mm X 40Mm; Better Adjusting Clutch A Little Before Riding.
Cylinder Inner Diameter 52Mm; Piston Outside Diameter 52Mm; 8Mm Front And Rear Mount Studs; 40Mm Alum Intake Stud Spacing; 52Mm Muffler Stud Spacing.
Excluding Manual; 52Mm Bore; Improved Magneto As Well.
Cdhpower Yd85cc Motor Replaement Top End Cylinder Set And Bottom End Crank Set For 2 Stroke Yd85cc;.
Features
- It comes as first pictured;YD85CC MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already
- CDHPOWER YD85cc Motor Replaement Top End Cylinder Set and Bottom End Crank Set for 2 stroke YD85CC
- Bore and Stroke: 52mm x 40mm; Better adjusting clutch a little before riding
- Excluding manual; 52mm bore; Improved magneto as well
- Cylinder inner diameter 52mm; Piston outside diameter 52mm; 8mm front and rear mount studs; 40mm alum intake stud spacing; 52mm muffler stud spacing
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #10
CDHPOWER PK80 Motor Replacement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke 66cc/80cc
Asin: B076BCG9GV | Ean: 0606321921019 | UPC: 606321921019
High Hole Piston And Long Connecting Rod;Wide Front Mount; 8Mm Bolts To Front And Rear Bolts;.
Clear Up The Cylinder Transfer Ports Before Assembling Maybe Some Rough Slag Inside Which Maybe Break Off And Cause The Jamming Of Pistons And Cylinders;Fully Attention On Screwing Cylinder To The End Bottom,Do Not Screw M8 Bolts Tightly That Maybe Cause Drill Through The End Bottom So Add Some Gasket Or Washer On Head Is Better Way To Prevent It Happen; Attention On Piston Ring If Put The Piston Out Of Cylinder, The Piston Rings Are Weak, Better With Right Way Install Piston Kit To Cylinder.
Slant Head; 40Mm Alum Intake Stud Spacing; Manual Excluded.
Bore And Stroke 47Mmx40mm; Better Adjusting Clutch A Little Before Riding.
Features
- It comes as first pictured; PK80 MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already
- Bore and Stroke 47mmx40mm; better adjusting Clutch a little before riding
- High hole Piston and Long connecting rod;Wide front mount; 8mm bolts to front and rear bolts;
- Slant head; 40mm alum intake stud spacing; manual EXCLUDED
- Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders;fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen; Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon
Looking For Something Else?
Search