TIGERSGATE 14" Sportster Handlebar Extended CAN-Bus & Front Turn Signal Wiring Harness & Brake Line & Clutch Cable & Throttle/Idle Cables Kit for 2007-2013 Harley Non-ABS Sportster XL Models, Black
Asin: B0C2YQDRR9 | Ean: 0767950233246 | UPC: 767950233246
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Complete Cables Kit: To Make The Installation More Convenient, We Have Collected All The Wires/Cables That A Taller Bar Required For Installation In Advance, So You Don’T Have To Search Everywhere For The Cables Or Wires That Need To Be Changed, Which Greatly Shortens The Installation Time And Allows You To Enjoy The Riding Faster!.
Package List: Include 1 * Can-Bus Wiring Harness, 1 * Front Turn Signal Wiring Harness, 1 * Brake Line, 1 * Clutch Cable, 1 * Throttle Cable & 1* Idle Cable As Shown In The Picture, With No Instructions. If You Have Any Questions, Please Feel Free To Message Us Via Amz Message, Thank You..
Smooth Working: With Advanced Technology And Workmanship, Our Iron Xl Wires/Cable/Line Kit Would Provide Smooth & Flexible Work To The Bike And Rider. Giving You A Safe And Good Feeling When Riding!.
Easy To Install: Direct Replacements For The Stock Short/Old Wire/Line/Cable, Just Need You To Remove The Stock Wire/Line/Cable Without Damaging The Motorcycle, Then Follow The Correct Route/Steps To Install The New Sportster Xl Wire/Line/Cable, Then All Done..
Quality You Can Trust: Our Stainless Steel Braided Sportster Xl Brake/Clutch/Throttle Cable/Wire With Black Vinyl Coating Creates This Characteristic Look Without Any Damages To The Areas Where The Cable Touches. And All The Durable Inner Wires Also Ensures The Whole Cable Has A Longer Life And Better Performance When Using..
Extended Length: The Sportster Xl Extension Wiring Kit Is Longer Than The Stock Wires/Cables To Fit Your Taller Handlebars Or Risers. Please Check The Specific Motorcycle Models On The Description Page Before Purchase, Thank You..
Features
- Fitment: Fits the following models with 14" handlebar: 2007-2013 Sportster XL models without ABS. (Please check the specific models on description page, thanks.)(And please Note 1: Our clutch cable is not a Hydraulic clutch line, (Note 2: Design for Front Single Disc Brake Models).
- Extended Length: The sportster XL extension wiring kit is longer than the stock wires/cables to fit your taller handlebars or risers. Please check the specific motorcycle models on the description page before purchase, thank you.
- Complete Cables Kit: To make the installation more convenient, we have collected all the wires/cables that a taller bar required for installation in advance, so you don t have to search everywhere for the cables or wires that need to be changed, which greatly shortens the installation time and allows you to enjoy the riding faster!
- Quality You Can Trust: Our stainless steel braided sportster XL brake/clutch/throttle cable/wire with black vinyl coating creates this characteristic look without any damages to the areas where the cable touches. And all the durable inner wires also ensures the whole cable has a longer life and better performance when using.
- Smooth Working: With Advanced Technology and Workmanship, our iron XL wires/cable/line kit would provide smooth & flexible work to the bike and rider. Giving you a safe and good feeling when riding!
- Easy to Install: Direct replacements for the stock short/old wire/line/cable, just need you to remove the stock wire/line/cable without damaging the motorcycle, then follow the correct route/steps to install the new sportster XL wire/line/cable, then all done.
- Package List: Include 1 * CAN-Bus wiring harness, 1 * Front Turn Signal wiring harness, 1 * Brake Line, 1 * clutch cable, 1 * Throttle cable & 1* Idle Cable as shown in the picture, with no instructions. If you have any questions, please feel free to message us via AMZ message, thank you.
- See more on Amazon...
Brand: SHYYGL | Manufacturer: TIGERSGATE.COM
Weight: 2.75 pounds
See On Amazon Similar To TIGERSGATE 14 Sportster Handlebar Extended
#1
Alpha Rider 1 inch Drag Style Steel Handlebars Drag Bar Dimpled for Harley Sportster 883 1200 Nightster 07-later XL
Asin: B01F6YMV3S
Brand: Alpha Rider
Dimensions: 0.04 x 31.10 x 0.98 inches
See On Amazon #2
TIGERSGATE 12" Rise Touring/Softail Mini Ape Hangers 1.25 Fat Handlebars with 2" Riser for Harley 18-later FXBB, FXBR, FXBRS FXST and '21-later FXBBS Models, Chrome
Asin: B0BYNYL4WF | Model: TIGERSGATE-PREWIRED | PartNumber: TIGERSGATE-PREWIRED | Ean: 0767950232300 | UPC: 767950232300
Handlebar Kits: Our Handlebar Kits Come With A Free Riser, So You No Longer Have To Worry About Not Finding The Right-Sized Riser..
Riding Comfort - The One-Piece Handlebar Riser Raises The Handlebars, Which Can Make For A More Comfortable And Natural Riding Position, Especially During Long Rides..
Control And Handling - By Raising The Handlebars, This Product Can Improve Your Control And Handling, Especially When Navigating Tricky Terrain Or Turns..
Easy Installation: Our Mini Ape Hangers Are Factory Drilled, Making It Easy To Hide Wiring For A Clean Look. The Flowing Shape Of These Handlebars Also Ensures That They Remain Comfortable Over The Long Haul. You Can Use The Existing Bolts On Your Bike To Attach The Handlebar Clamp..
Creative Design: The Riser Features A Unique Transparent Dashboard Design, Allowing Riders To Clearly See Information Such As Speed And Fuel Levels, While Also Adding A Sense Of Technology To The Motorcycle's Appearance..
Classic Chopper Style: Our Softail Handlebars Are Perfect For Completing An "Old School" Look, Giving Your Ride That Classic Chopper Style..
Trusted Quality: These Mini Ape Handlebars Are Made From Top-Class Steel And Finished With A Gloss Black Powder And Hand Polish, Along With High-Standard Rust-Proof Plating For Added Durability..
Features
- Fitment: Fits '18-later Street Bob(FXBB), Breakout(FXBR), Breakout 114(FXBRS) Softail Standard(FXST) and '21-later Street Bob 114 (FXBBS) models.
- Trusted Quality: These Mini Ape Handlebars are made from top-class steel and finished with a gloss black powder and hand polish, along with high-standard rust-proof plating for added durability.
- Handlebar Kits: Our handlebar kits come with a free riser, so you no longer have to worry about not finding the right-sized riser.
- Classic Chopper Style: Our Softail handlebars are perfect for completing an old school look, giving your ride that classic chopper style.
- Easy Installation: Our Mini Ape Hangers are factory drilled, making it easy to hide wiring for a clean look. The flowing shape of these handlebars also ensures that they remain comfortable over the long haul. You can use the existing bolts on your bike to attach the handlebar clamp.
- Creative Design: The riser features a unique transparent dashboard design, allowing riders to clearly see information such as speed and fuel levels, while also adding a sense of technology to the motorcycle's appearance.
- Riding Comfort - The one-piece handlebar riser raises the handlebars, which can make for a more comfortable and natural riding position, especially during long rides.
- Control and Handling - By raising the handlebars, this product can improve your control and handling, especially when navigating tricky terrain or turns.
- See more on Amazon...
Brand: SHYYGL | Manufacturer: TIGERSGATEPARTS.COM
See On Amazon #3
TIGERSGATE 40" Black Vinyl Stainless Steel Braided Extended Throttle and Idle Cable Kit for 2007-2022 Harley Sportsters XL Models, 1996-2017 Some Dyna Models
Asin: B0BQR44471
Extended Length: Throttle Cable: 40.5" . Idle(Return) Cable: 40" (With Spring). The Extension Throttle & Idle(Return) Cable Kit Is Longer Than Stock To Fit Your Taller Handlebars Or Risers. Please Confirm Your Motorcycle Model Before Purchase, Thank You..
Note: Package Includes 1*Throttle Cable And 1*Idle Cable As Shown On Picture. And Please Note That Some Of The Buyers' Motorcycle Needs A Longer Cable Kit Than A Normal Length Because Of The Different Cable Route(Such As Some Motorcycles' Route Requires A Turn). If You Have Any Questions, Please Feel Free To Message Us Via Amz Message, Thank You..
Smooth Working: Our Stainless Steel Braided Cable With Black Vinyl Coating Create This Characteristic Look Without Any Damages For The Areas Where The Cable Touches. The Kit Would Provide A Smooth & Flexible Work For The Rider. Giving You A Safe And Good Feeling When Riding..
Fitment 2: 2007-2011 Dyna Street Bob/Super Glide 14"Handlebar；2012-2017 Dyna Street Bob - Fxdb Models. 2012-2014 Dyna Super Glide Custom - Fxdc Models. 2014-2016 Dyna Switchback - Fld Models. 2012-2017 Dyna Wide Glide - Fxdwg Models 14"Handlebar. And Fits 2011-2015 Softail 14" Handlebars..
Features
- Fitment 1: Fits 2007-2013 Harley Sportsters XL Models 16"handlebar 2014-2022 Harley Sportster XL Models 12"handlebar ;1996-2006 Dyna Super Glide/Wide Glide/Low Rider Models 14"handlebar 2007 2008, 2010 2011 Dyna Wide Glide FXDWG Models 14"handlebar.
- Fitment 2: 2007-2011 Dyna street bob/super glide 14handlebar 2012-2017 Dyna Street Bob - FXDB models. 2012-2014 Dyna Super Glide Custom - FXDC models. 2014-2016 Dyna Switchback - FLD models. 2012-2017 Dyna Wide Glide - FXDWG models 14handlebar. And fits 2011-2015 Softail 14 handlebars.
- Extended Length: Throttle Cable: 40.5 . Idle(return) Cable: 40 (With Spring). The extension throttle & idle(return) cable kit is longer than stock to fit your taller handlebars or risers. Please confirm your motorcycle model before purchase, thank you.
- Smooth Working: Our stainless steel braided cable with black vinyl coating create this characteristic look without any damages for the areas where the cable touches. The kit would provide a smooth & flexible work for the rider. Giving you a safe and good feeling when riding.
- Note: Package includes 1*throttle cable and 1*Idle cable as shown on picture. And please note that some of the buyers' motorcycle needs a longer cable kit than a normal length because of the different cable route(such as some motorcycles' route requires a turn). If you have any questions, please feel free to message us via AMZ message, thank you.
- See more on Amazon...
Brand: TIGERSGATE | Manufacturer: Jiangmen Taikaiwei Technology Co., Ltd.
Weight: 0.70 pounds
See On Amazon #4
TIGERSGATE 50.3" Black Vinyl Stainless Steel Braided Extended Throttle and Idle Cable Kit for 2000-2006 Softail Models 14" Handlebar
Asin: B0BQR3C653
High-Class Quality: Our Stainless Steel Braided Cable With Black Vinyl Coating Create This Characteristic Look Without Any Damages For The Areas Where The Cable Touches. And Durable Inner Wire Also Ensures The Whole Cable A Longer Life And A Better Performance When Using..
Note: Package Includes 1*Throttle Cable And 1*Idle Cable As Shown On Picture. And Please Note That Some Of The Buyers' Motorcycle Needs A Longer Cable Kit Than A Normal Length Because Of The Different Cable Route(Such As Some Motorcycles' Route Requires A Turn). If You Have Any Questions, Please Feel Free To Message Us Via Amz Message, Thank You..
Smooth Working: Our Extended Throttle And Idle(Return) Cable Kit Would Provide A Smooth & Flexible Work For The Rider. Giving You A Safe And Good Feeling When Riding..
Extended Length: Throttle Cable: 50.3" . Idle(Return) Cable: 50.3" (With Spring). The Extension Throttle & Idle(Return) Cable Kit Is Longer Than Stock To Fit Your Taller Handlebars Or Risers. Please Confirm Your Motorcycle Model Before Purchase, Thank You..
Features
- Fitment: Fits 2000-2006 Harley Softail models with 14" handlebar.
- Extended Length: Throttle Cable: 50.3 . Idle(return) Cable: 50.3 (With Spring). The extension throttle & idle(return) cable kit is longer than stock to fit your taller handlebars or risers. Please confirm your motorcycle model before purchase, thank you.
- High-class Quality: Our stainless steel braided cable with black vinyl coating create this characteristic look without any damages for the areas where the cable touches. And durable inner wire also ensures the whole cable a longer life and a better performance when using.
- Smooth Working: Our extended throttle and idle(return) cable kit would provide a smooth & flexible work for the rider. Giving you a safe and good feeling when riding.
- Note: Package includes 1*throttle cable and 1*Idle cable as shown on picture. And please note that some of the buyers' motorcycle needs a longer cable kit than a normal length because of the different cable route(such as some motorcycles' route requires a turn). If you have any questions, please feel free to message us via AMZ message, thank you.
- See more on Amazon...
Brand: TIGERSGATE | Manufacturer: Jiangmen Taikaiwei Technology Co., Ltd.
Weight: 0.70 pounds
See On Amazon #5
TIGERSGATE 14" & 16" Handlebar Wire Extension Harness Kit (CAN-Bus) Designed for 2007-2013 Harley Models Dyna, Softail and Sportster Models
Asin: B0BYNS7NPB | Model: FXBX008-2 | PartNumber: FXBX008-2 | Ean: 0767950232188 | UPC: 767950232188
Note：Please Remove The Old Wires From The Connector Carefully. And Please Do Not Break The New Pins When You Are Inserting The New Extension Wires..
Customer Service: If You Have Any Questions, Please Feel Free To Message Us Via Amz Message, Thank You..
Package List：This Is A Professional And High Quality Wire Extension Kit That Includes Color-Coded Wires With Male And Female Pins Installed. Package Includes A Set Of Extension Wires And Heat Shrinkable Tubes..
Application：Used For Extending The Corresponding Handlebar Main Wiring Harness When Installing Taller Handlebars. These Wires Are Designed To Be Inserted Between The Factory Wiring Harness And Factory Plug At The Base Of The Handlebar..
Features
- Fitment list Fits for 2007-2013 Harley Dyna, Softail, Sportster 14" & 16" handlebars, such as Fat boy, Heritage Softail, Wide Glide FXDWG, Super Glide, Wide Glide, Low Rider, Night Train, Sportster 883, Sportster 1200...
- Application Used for extending the corresponding handlebar main wiring harness when installing taller handlebars. These wires are designed to be inserted between the factory wiring harness and factory plug at the base of the handlebar.
- Note Please remove the old wires from the connector carefully. And please do not break the new pins when you are inserting the new extension wires.
- Package List This is a professional and high quality wire extension kit that includes color-coded wires with male and female pins installed. Package includes a set of extension wires and heat shrinkable tubes.
- Customer Service: If you have any questions, please feel free to message us via AMZ message, thank you.
- See more on Amazon...
Brand: Generic | Manufacturer: TIGERSGATE.COM
See On Amazon #6
Tigersgate Black 14" Softail Cables Kit Handlebar Extended CAN-Bus/Front Turn Signal/Brake Line/Clutch Cable/TBW Wires for 2020-2021 Softail w/ABS
Asin: B0C33K41KR | Ean: 0767950541105 | UPC: 767950541105
Complete Cables Kit: To Make The Installation More Convenient, We Have Collected All The Wires/Cables That A Taller Bar Required For Installation In Advance, So You Don’T Have To Search Everywhere For The Cables That Needs To Be Changed, Which Greatly Shortens The Installation Time And Allows You To Enjoy The Riding Faster!.
Package List: The Package Includes 1 * Can-Bus Wiring Harness, 1 * Front Turn Signal Wiring Harness, 1 * Brake Line, 1 * Clutch Cable, 1 * Throttle By Wire (Tbw) As Shown In The Picture With No Instructions. If You Have Any Questions, Please Feel Free To Message Us Via Amz Message, Thank You..
Smooth Working: With Advanced Technology And Workmanship, Our Wire/Cable/Line Kit Would Provide A Smooth & Flexible Work To The Bike And Rider. Giving You A Safe And Good Feeling When Riding!.
Easy To Install: Direct Replacement For The Stock Softail Short/Old Wire/Line/Cable, Just Need You To Remove The Stock Wire/Line/Cable Without Damaging The Motorcycle, Then Follow The Correct Route/Steps To Install The New Wire/Line/Cable, Then All Done..
Quality You Can Trust: Our Stainless Steel Braided Ape Hanger Clutch Cable/Brake Line With Black Vinyl Coating Creates This Characteristic Look Without Any Damage To The Areas Where The Cable Touches. And All The Durable Inner Wires Also Ensures The Whole Cable Has A Longer Life And Better Performance When Using..
Extended Length: The Extension Softail Wiring Kit Is Longer Than Stock Wires/Cables To Fit Your Taller Handlebars Or Risers. Please Check The Specific Motorcycle Models On The Description Page Before Purchase, Thank You..
Features
- Fitment: Fits the following models with a 14" handlebar: 2020-2021 Softail models with ABS Heritage Classic, Low Rider, Slim, Breakout, Deluxe, Fat Bob, Fat Boy, Street Bob, Sport Glide .(And please Note: Our clutch cable is not a Hydraulic clutch line.)
- Extended Length: The extension Softail wiring kit is longer than stock wires/cables to fit your taller handlebars or risers. Please check the specific motorcycle models on the description page before purchase, thank you.
- Complete Cables Kit: To make the installation more convenient, we have collected all the wires/cables that a taller bar required for installation in advance, so you don t have to search everywhere for the cables that needs to be changed, which greatly shortens the installation time and allows you to enjoy the riding faster!
- Quality You Can Trust: Our stainless steel braided Ape Hanger clutch cable/brake line with black vinyl coating creates this characteristic look without any damage to the areas where the cable touches. And all the durable inner wires also ensures the whole cable has a longer life and better performance when using.
- Smooth Working: With Advanced Technology and Workmanship, our wire/cable/line kit would provide a smooth & flexible work to the bike and rider. Giving you a safe and good feeling when riding!
- Easy to Install: Direct replacement for the stock Softail short/old wire/line/cable, just need you to remove the stock wire/line/cable without damaging the motorcycle, then follow the correct route/steps to install the new wire/line/cable, then all done.
- Package List: The package includes 1 * CAN-Bus wiring harness, 1 * Front Turn Signal wiring harness, 1 * Brake Line, 1 * clutch cable, 1 * Throttle by Wire (TBW) as shown in the picture with no instructions. If you have any questions, please feel free to message us via AMZ message, thank you.
- See more on Amazon...
Brand: SHYYGL | Manufacturer: TIGERSGATE.COM
See On Amazon #7
TIGERSGATE PRE-WIRED 14" Rise 1.25"Ape Hangers Handlebar & Cables/Lines Kit for Harley Road Glide 2015, Black
Asin: B0C36D54XP | Model: TIGERSGATE-PREWIRED | PartNumber: TIGERSGATE-PREWIRED | Ean: 0767950541464 | UPC: 767950541464
Versatile Fit: These Handlebars Are Designed To Fit A Wide Range Of Harley Models, Making Them A Versatile Choice For Motorcycle Enthusiasts. The 1.25-Inch Diameter And 14-Inch Height Provide A Comfortable Grip For Riders Of Different Sizes. Providing A Sturdy And Durable Construction That Can Withstand The Rigors Of The Road..
Easy Installation: The Handlebars Are Designed For Easy Installation, And The Kit Includes All The Necessary Hardware To Mount Them To Your Motorcycle. The Kit Also Includes Extended Wiring To Accommodate Handlebar Height Increases, Making The Installation Process Even Easier. Technical Support: 5 Engineers Are Always Online, Solving Any Problems In Time, Just Find Tigersgate's Email In About Seller Profile And Get In Touch..
Aggressive Attitude: With Their Aggressive Point At The Top, Our Ape Hangers Handlebars Give Your Bike The Attitude You're Looking For, Making Your Harley Motorcycle Stand Out In Any Setting..
Package List: 1 'Plug N Play' Handlebar Switch Wiring 'Can-Bus' Harnesses, 1 On Each Side Of The Bars, 1 Plug And Play Electronic Throttle Cable（Tbw），1 Heated Grip Wire. And The Extended Wiring Included In The Kit Allows You To Install The Handlebars With A Higher Rise, Providing Better Control And Maneuverability..
Note-The Tbw Routing Plan: We Preinstalled The Stock Tbw Wire And Heated Grip Wire， But You Have To Cut Your Existing Tbw And Prewired Tbw Wire, And Then Connect Them Because The Handlebar Does Not Have Enough Room For The Total Length Of Wires. If You Don't Want To Cut Your Old Wire, You Need To Pull The Prewired Tbw Wire Out And Reroute The Tbw Wire But The Process Is Painful..
Innovative Design: Our Harley Ape Hangers Handlebars Feature An Innovative Design That Addresses The Challenge Of Wiring Throttle-By-Wire (Tbw) Cables Through The Handlebars. With Our ‘Plug And Play’ Tbw Harness, You Can Easily Install And Connect The Cables Without The Need For Complicated Wiring..
Features
- Perfect Fit: Our Harley Meathook handlebars are specifically designed to fit Harley Road Glide 2015. (Note: If you would like to install this bar on your 2016-2024 Road Glide, please MSG us to send you a TBW extension harness to make it fit before purchase.)
- Innovative Design: Our Harley Ape Hangers Handlebars feature an innovative design that addresses the challenge of wiring throttle-by-wire (TBW) cables through the handlebars. With our Plug and Play TBW harness, you can easily install and connect the cables without the need for complicated wiring.
- Versatile Fit: These handlebars are designed to fit a wide range of Harley models, making them a versatile choice for motorcycle enthusiasts. The 1.25-inch diameter and 14-inch height provide a comfortable grip for riders of different sizes. Providing a sturdy and durable construction that can withstand the rigors of the road.
- Note-the TBW routing plan: We preinstalled the Stock TBW wire and heated grip wire but you have to cut your existing TBW and prewired TBW wire, and then connect them because the handlebar does not have enough room for the total length of wires. if you don't want to cut your old wire, you need to pull the prewired TBW wire out and reroute the TBW wire but the process is painful.
- Aggressive Attitude: With their aggressive point at the top, our Ape Hangers Handlebars give your bike the attitude you're looking for, making your Harley motorcycle stand out in any setting.
- Package List: 1 'Plug n Play' Handlebar Switch Wiring 'Can-Bus' Harnesses, 1 on each side of the bars, 1 Plug and play electronic throttle cable TBW 1 heated grip wire. And the extended wiring included in the kit allows you to install the handlebars with a higher rise, providing better control and maneuverability.
- Easy Installation: The handlebars are designed for easy installation, and the kit includes all the necessary hardware to mount them to your motorcycle. The kit also includes extended wiring to accommodate handlebar height increases, making the installation process even easier. Technical Support: 5 engineers are always online, solving any problems in time, just find Tigersgate's email in About Seller Profile and get in touch.
- See more on Amazon...
Brand: SHYYGL | Manufacturer: TIGERSGATEPARTS.COM
See On Amazon #8
TIGERSGATE 14 INCH Handlebar Wiring Wire Extension Harness CAN Bus for Harley Softails Dynas Touring Sportsters
Asin: B09HMLTKCY | Model: TIGERSGATEA2 | PartNumber: TIGERSGATEA2 | Ean: 0797444630534 | UPC: 797444630534
Fit For Handlebar Height：14".
Plug N Play Design.Save Complicated Steps Of Detaching And Connecting Wire Harness. The Connectors Are Also Small Enough To Go Into Most Handlebars For Ease Of Hiding Wires..
The Wire Extension Harness Includes Color Coded Wires And Male And Female Pins..
This Handlebar Switch Extension Is Perfect For Extending Your Wiring Harness When Rising Handlebars, Electronic Throttle By Wire Extensions Must Be Purchased Separately..
Features
- Fit for 2011 and Newer Softail,2012 and Newer Dyna,2014 and Newer Touring ,2014 and Newer Sportster
- This Handlebar Switch Extension is perfect for Extending your Wiring harness When rising Handlebars, Electronic Throttle by Wire extensions must be purchased separately.
- Fit For Handlebar Height 14
- The wire extension harness includes color coded wires and male and female pins.
- Plug N Play design.save complicated steps of detaching and connecting wire harness. The connectors are also small enough to go into most handlebars for ease of hiding wires.
- See more on Amazon...
Brand: TIGERSGATE | Manufacturer: Jiangmen Taikaiwei Technology Co., Ltd.
Dimensions: 1.00 x 5.00 x 4.00 inches
See On Amazon #9
TIGERSGATE 12" Handlebar Wire Extension Harness Kit (CAN-Bus) Designed for 1996-2006 Harley Touring Models
Asin: B0BYNTJZCL | Model: FXBX008-2 | PartNumber: FXBX008-2 | Ean: 0767950232164 | UPC: 767950232164
Note：Please Remove The Old Wires From The Connector Carefully. And Please Do Not Break The New Pins When You Are Inserting The New Extension Wires..
Customer Service: If You Have Any Questions, Please Feel Free To Message Us Via Amz Message, Thank You..
Package List：This Is A Professional And High Quality Wire Extension Kit That Includes Color-Coded Wires With Male And Female Pins Installed. Package Includes A Set Of Extension Wires And Heat Shrinkable Tubes..
Application：Used For Extending The Corresponding Handlebar Main Wiring Harness When Installing Taller Handlebars. These Wires Are Designed To Be Inserted Between The Factory Wiring Harness And Factory Plug At The Base Of The Handlebar..
Features
- Fitment list Fits for 1996-2006 Electra Glide, Road King, Road Glide, and 2006 Street Glide model. These are professional harnesses with factory pins that we use in our shop. All you need to do is to remove the pins from the factory plug and add the extensions
- Application Used for extending the corresponding handlebar main wiring harness when installing taller handlebars. These wires are designed to be inserted between the factory wiring harness and factory plug at the base of the handlebar.
- Note Please remove the old wires from the connector carefully. And please do not break the new pins when you are inserting the new extension wires.
- Package List This is a professional and high quality wire extension kit that includes color-coded wires with male and female pins installed. Package includes a set of extension wires and heat shrinkable tubes.
- Customer Service: If you have any questions, please feel free to message us via AMZ message, thank you.
- See more on Amazon...
Brand: Generic | Manufacturer: TIGERSGATE.COM
See On Amazon #10
TIGERSGATE Chrome 6" Rise Z-Bar Sportster Handlebar with Indents for Harley 2007-up Sportster XL883 & XL1200 Models, 2006-2017 FXDB & 1996-2005 Dyna FXDWG, Some Yamaha Virago XV, Honda Models
Asin: B0BY89SVHG | Model: FXB008-14-C | PartNumber: FXB008-14-C | Ean: 0767950521695 | UPC: 767950521695
Classic Z Bar Design: With A Timeless Z-Bar Design, Our Bars Add A Sleek And Stylish Look To Your Bike, Making It Stand Out From The Crowd..
Customer Service: Please Feel Free To Message Us Via Amz Message If You Have Any Questions, We Will Give You A Good Solution, Thank You..
Easy Installation: Installing Our Z Handlebar Is A Breeze, Thanks To The Pre-Drilled Wiring Hole And Smooth Edges. The Concealed Cable Routing Provides A Clean And Visually Appealing Appearance, Elevating Your Cycling Experience..
Convenient Wiring Holes: Say Goodbye To Worries About Edges Chopping Inner Wires. Our Z Ape Hangers Come With Drilled Wiring Holes, Ensuring A Hassle-Free Installation Process And Protecting Your Cables For A Seamless Cycling Experience..
Stable Construction: Our Z Bars Boast High Tensile Strength And A Solid Structure, Making Them Resistant To Breaking And Built To Last..
Quality You Can Trust: Our 6 Inch Z Bars Are Crafted From High-Quality Carbon Steel With Cast Seamless 90-Degree Bends, Ensuring Exceptional Durability And Enhanced Performance..
Features
- Fitment: Fits 2007-up Sportster XL883L, XL883N, XL1200CX, XL1200L, XL1200N, XL1200NS, XL1200T, XL1200V, XL1200X and XL1200XS models. Also fits 2006-2017 Dyna Street Bob FXDB & 1996-2007 Dyna Wide Glide FXDWG models. And can also fits Yamaha Virago XV 250 500 535 700 750 920 1100 models, and fits Honda VF Magna Stateline 500 700 750 1100 & Honda Shadow Sabre VT VF 700 750 1100 models.
- Quality You Can Trust: Our 6 inch z bars are crafted from high-quality carbon steel with cast seamless 90-degree bends, ensuring exceptional durability and enhanced performance.
- Classic Z Bar Design: With a timeless Z-bar design, our bars add a sleek and stylish look to your bike, making it stand out from the crowd.
- Stable Construction: Our Z bars boast high tensile strength and a solid structure, making them resistant to breaking and built to last.
- Easy Installation: Installing our z handlebar is a breeze, thanks to the pre-drilled wiring hole and smooth edges. The concealed cable routing provides a clean and visually appealing appearance, elevating your cycling experience.
- Convenient Wiring Holes: Say goodbye to worries about edges chopping inner wires. Our Z ape hangers come with drilled wiring holes, ensuring a hassle-free installation process and protecting your cables for a seamless cycling experience.
- Customer Service: Please feel free to message us via AMZ message if you have any questions, we will give you a good solution, thank you.
- See more on Amazon...
Brand: Generic | Manufacturer: TIGERSGATE
Dimensions: 0.04 x 25.75 x 12.00 inches
See On Amazon #11
TIGERSGATE Gloss Black 1-1/2" SUPER FAT 14" Rise Handlebar For 2015-2022 Harley Touring Road Glide FLTRX/FLTRXS/FLTRU
Asin: B09Z2KGK9D | Model: TIGERSGATE-handlebar-49 | PartNumber: TIGERSGATE-handlebar-49
Premium Material: Laser Cut, Fully Tig Welded, Beveled & De-Burred For Easy Internal Wire Pulling, And Polished To Show Quality Finish. No Slag Inside The Bar Tubes Makes Installation Simple..
Easy Installation: Designed With A 1.25" Diameter Clamp, Diamond-Knurled Areas Ensure Stable Installation. Bars Are Dimpled And Drilled For Wiring And Handlebar Controls, Most Applications Will Require Longer Cables And Extension Of Handlebar Wiring ( Available In Tigersgate).
Exceptional Customer Support: Our Handlebars Come With 24/7 Customer Service To Provide A Good Solution To Any Questions You May Have..
Comfortable Riding: Our Ape Hangers Handlebars Deliver A Higher Hand Position For An Aggressive Look, Relaxed Style, And Comfortable Riding Position For Some Riders..
High-Quality Finish: Our Handlebars Feature A Gloss Black Powder Coating And Hand-Polished Finish, With High-Standard Rust-Proof Plating That Can Withstand 48 Hours Of Salt Spray. Some Handlebars May Have Surface Damage Caused By Violent Handling During Transportation. If So, Please Contact Us For A Replacement..
Features
- Perfect Fitment:2015-Up FLTR (Road Glide) FLTRXS (Road Glide Special) FLTRU (Road Glide Ultra) Except for the road glide trike
- High-Quality Finish: Our handlebars feature a gloss black powder coating and hand-polished finish, with high-standard rust-proof plating that can withstand 48 hours of salt spray. Some handlebars may have surface damage caused by violent handling during transportation. If so, please contact us for a replacement.
- Premium Material: Laser cut, fully TIG welded, beveled & de-burred for easy internal wire pulling, and polished to show quality finish. No slag inside the bar tubes makes installation simple.
- Comfortable Riding: Our Ape hangers handlebars deliver a higher hand position for an aggressive look, relaxed style, and comfortable riding position for some riders.
- Easy Installation: Designed with a 1.25 diameter clamp, Diamond-knurled areas ensure stable installation. Bars are dimpled and drilled for wiring and handlebar controls, Most applications will require longer cables and extension of handlebar wiring ( Available in TIGERSGATE)
- Exceptional Customer Support: Our handlebars come with 24/7 customer service to provide a good solution to any questions you may have.
- See more on Amazon...
Brand: TIGERSGATE | Manufacturer: Jiangmen Taikaiwei Technology Co., Ltd.
Dimensions: 0.04 x 37.00 x 14.00 inches
See On Amazon #12
Tigersgate 14" Ape Hanger Handlebar Sportster Front Brake Line Stainless Steel Braided Extended Brake Cable for 2004-up Harley Sportster XL non-ABS
Asin: B0C2YNYCSG | Model: FXBX014-2 | PartNumber: FXBX014-2 | Ean: 0767950233017 | UPC: 767950233017
Quality You Can Trust: Our Stainless Steel Braided Brake Cable Creates This Characteristic Look Without Any Damage To The Areas Where The Cable Touches & Keeps Unwanted Moisture Out Of The Line. And Durable Inner Wire Also Ensures The Whole Cable Has A Longer Life And Better Performance When Using..
Package List: The Package Includes 1 * Front Brake Line And Comes Standard With Polished Silver On Brass Fittings With Matching Bolts, With No Instructions. If You Have Any Questions, Please Feel Free To Message Us Via Amz Message, Thank You..
Easy To Install: Direct Replacement For The Stock Short/Old Brake Line, Just Need You To Remove The Stock Brake Cable Without Damaging The Motorcycle, Then Follow The Correct Route/Steps To Install The New Brake Line, Then All Done..
Note: Please Note That Some Of The Buyers' Motorcycle Needs A Longer Cable Than A Normal Length Because Of The Different Cable Route(Such As Some Motorcycles' Route Requires A Turn). And Please Find A Professional Mechanical Person To Install It If You Do Not Know How To Install The Product..
Better Work: With Advanced Technology And Workmanship, Our Hydraulic Brake Line Hose Will Greatly Improve Your Braking Effectiveness Because There Is Almost No Expansion Under Pressure, Requiring Less Force To Operate At Its Maximum. The Brake Lever Feel Stays Firm (Less Squishy Than Rubber Hoses) At All Times. This Advantage Reduces Braking Distances And Increases The Efficiency Of The Calipers..
Extended Length: The Extension 46.5" Sportster Front Brake Line Is Longer Than Stock To Fit Your Taller Handlebars Or Risers. Please Check The Specific Motorcycle Models On The Description Page Before Purchase, Thank You..
Features
- Fitment: Fits 2004-later non-ABS Sportster XL & 2018-up Softail non-ABS models with 14" handlebar (Except for All Front Dual Discs Models).
- Extended Length: The extension 46.5 Sportster front brake line is longer than stock to fit your taller handlebars or risers. Please check the specific motorcycle models on the description page before purchase, thank you.
- Quality You Can Trust: Our stainless steel braided brake cable creates this characteristic look without any damage to the areas where the cable touches & keeps unwanted moisture out of the line. And durable inner wire also ensures the whole cable has a longer life and better performance when using.
- Better Work: With Advanced Technology and Workmanship, our hydraulic brake line hose will greatly improve your braking effectiveness because there is almost no expansion under pressure, requiring less force to operate at its maximum. The brake lever feel stays firm (less squishy than rubber hoses) at all times. This advantage reduces braking distances and increases the efficiency of the calipers.
- Easy to Install: Direct replacement for the stock short/old brake line, just need you to remove the stock brake cable without damaging the motorcycle, then follow the correct route/steps to install the new brake line, then all done.
- Note: Please note that some of the buyers' motorcycle needs a longer cable than a normal length because of the different cable route(such as some motorcycles' route requires a turn). And please find a professional mechanical person to install it if you do not know how to install the product.
- Package List: The package includes 1 * Front Brake Line and comes standard with polished silver on brass fittings with matching bolts, with no instructions. If you have any questions, please feel free to message us via AMZ message, thank you.
- See more on Amazon...
Brand: SHYYGL | Manufacturer: TIGERSGATE.COM
Weight: 0.42 pounds
See On Amazon #13
TIGERSGATE Black Pre-wired 14" Rise Road Glide Meathook Monkey Bars 1 1/4" Ape Hanger Handlebars Designed for 2016-up Harley Road Glide Models
Asin: B0C5LTRL6V | Model: FXBCX003A-14 | PartNumber: FXBCX003A-14 | Ean: 0767950542676 | UPC: 767950542676
Premium Material: Our Handlebars Are Made Of High-Quality Steel And Feature Automotive Wire And Insulated Layer With Chemically Cross-Line Polyethylene, Providing Durability, Longevity, And Anti-Rusting Properties. Our Wires Are Also Resistant To Moisture, Solvents, And Extreme Temperatures..
Comprehensive Package List: Our Package Includes 1 * Pre-Wired Handlebar, 1 * Plug N Play Can-Bus Harness, 1 * Tbw (Throttle By Wire), 1 * Heated Grips Wire Harness, And 1 * Easy Installation Tools Kit(Not Including The Pull Cable) As The Picture Shown..
Exceptional Customer Support: We Provide 24/7 Customer Service. And 5 Engineers Are Always Online, Solving Any Problems In Time, Just Find Tigersgate's Email In About Seller Profile And Get In Touch..
Please Note: We Only Prewired The Right Side Heated Grip Wire, If You Need Heated Grip Wires On Both Sides, Please Msg Us To Get The Left One, Thanks.
Hand-Crafted For Meathook Style And Attitude: Our Handlebars Are Both Hand-Wired And Black Powder Coated And Hand-Polished For Anti-Rusting,Combine Comfort With Aggressive Attitude. Unique Prewired And 1.25" Fat Bar And 1" Diameter Clamping Area For Stock Mounting Clamp ..
Note-The Tbw Routing Plan: We Preinstalled The Stock Tbw Wire And Heated Grip Wire, But You Have To Cut Your Existing Tbw And Prewired Tbw Wire, And Then Connect Them Because The Handlebar May Not Have Enough Room For The Total Length Of Wires. If You Don't Want To Cut Your Old Wire, You Need To Pull The Prewired Tbw Wire Out And Reroute The Tbw Wire But The Process Is Painful. （The Heated Grip Wire Harness Needs The Same Process If You Need To Use It.）.
Hassle-Free Installation: Our Road Glide Ape Hangers Make Installation Quick And Easy, With No Complicated Wiring Procedures Required. We Pre-Plumbed The Can Bus, Tbw(Throttle By Wire), And Heated Grips Wire Harness, Which Makes Installation More Convenient Than Ever. (So There Is No Need To Use The Pre-Run Pull Wire Because We Have Pre-Wired All Required Wires, Please Understand, Thanks.).
Features
- Fitment: Perfect Fit for Harley Road Glide - This 1 1/4" PREWIRED 14" Meathook Monkey Bar Ape is Compatible with all the controls on Harley Davidson 2016-UP Road Glide Road Glide Special Road Glide Ultra, maintaining the factory look of your motorcycle.
- Hassle-Free Installation: Our road glide ape hangers make installation quick and easy, with no complicated wiring procedures required. We pre-plumbed the CAN bus, TBW(throttle by wire), and heated grips wire harness, which makes installation more convenient than ever. (So there is no need to use the pre-run pull wire because we have pre-wired all required wires, please understand, thanks.)
- Premium Material: Our handlebars are made of high-quality steel and feature Automotive Wire and Insulated layer with Chemically Cross-Line Polyethylene, providing durability, longevity, and anti-rusting properties. Our wires are also resistant to moisture, solvents, and extreme temperatures.
- Note-the TBW routing plan: We preinstalled the Stock TBW wire and heated grip wire, but you have to cut your existing TBW and prewired TBW wire, and then connect them because the handlebar may not have enough room for the total length of wires. if you don't want to cut your old wire, you need to pull the prewired TBW wire out and reroute the TBW wire but the process is painful. The heated grip wire harness needs the same process if you need to use it.
- Please Note: We only prewired the right side heated grip wire, if you need heated grip wires on both sides, please MSG us to get the left one, thanks
- Hand-Crafted for meathook Style and Attitude: Our handlebars are both hand-wired and Black Powder coated and hand-polished for anti-rusting,Combine comfort with Aggressive attitude. Unique Prewired and 1.25 fat bar and 1 diameter clamping area for stock mounting clamp .
- Comprehensive Package List: Our package includes 1 * pre-wired handlebar, 1 * plug N play Can-Bus harness, 1 * TBW (throttle by wire), 1 * heated grips wire harness, and 1 * easy installation tools kit(not including the pull cable) as the picture shown.
- Exceptional Customer Support: We provide 24/7 customer service. And 5 engineers are always online, solving any problems in time, just find Tigersgate's email in About Seller Profile and get in touch.
- See more on Amazon...
Brand: SHYYGL | Manufacturer: TIGERSGATE.COM
Weight: 7.02 pounds
See On Amazon #14
Tigersgate Pre-wired 16" Rise Road Glide Ape Hangers 1.5" Fat Handlebars with Heated Grip Wire for 2008-2013 Harley Road Glide, (Black
Asin: B0BPPFVHGD | Model: 2008-2013 | PartNumber: 2008-2013
Innovative Solution For Pre-2014 Models - Unlike The 2014-2023 Touring Models, We Can't Pre-Run Complete Can-Bus Wiring In 2008-2013 Touring Handlebars, So We Thought Of A New Solution. We Pre-Buried Most Of The Control Wiring Harness, And You Only Need To Cut The Wiring Harness On The Handlebar And Connect The Pre-Embedded Wiring Harness. This Innovation Saves You Time And Effort..
Comprehensive Package List - Our Package Includes 1 Installation Instruction, 1 Prewired Handlebar (Available In 12", 14" Or 16" Classic Chrome Or Gloss Black), 1 Prewired Handlebar Switch Wiring (For Stock Switches), 1 Prewired "Plug N Play" Twist Grip Sensor "Tbw" Harness, 1 Prewired "Plug N Play" Heated Grip Wire, And 1 Set Of Additional Heat Shrink (Includes Our "Solder Seal" Pre-Soldered/Heat Shrink Connectors)..
Exceptional Customer Support - We Provide 24/7 Customer Service . If You Have Any Questions Or Concerns, Please Message Us To Get A Good Solution. We Are Committed To Providing The Best Customer Experience Possible..
Comfortable Riding Experience - Our Handlebars Are Carefully Designed To Provide A Natural, Relaxed Grip Combined With Comfortable Pull-Back Distance, Reducing The Fatigue Of Long-Haul Riding, And Allowing You To Experience The Fun Of Riding Without Any Discomfort..
Hand-Crafted For High Style And Attitude - Our Handlebars Are Both Hand-Wired And Hand-Finished, Giving Them Tons Of Attitude And Comfort With A Natural Hand Position. Designed With Beefy 1 1/4" Diameter Exposed Bars And A 1" Diameter Clamping Area, They Are Perfect For Anyone Looking For A Unique And Stylish Upgrade..
Premium Material - Our Handlebars Are Made Of High-Level Quality Steel, Ensuring Durability, Longevity, And Anti-Rusting Properties. The Automotive Wire And Insulated Layer With Chemically Cross-Line Polyethylene Make Them Resistant To Moisture, Most Solvents, And Extreme Temperatures, Making Our Wires Ideal For Engine Compartment Applications..
Hassle-Free Installation - With Our Pre-Wiring, The Installation Process Of Our Handlebars Is Quick And Straightforward, Eliminating The Need For Complicated Wiring Procedures. We Pre-Plumbed The Internal Wiring And Pre-Cut The Bar End For Tbw Applications, Making Them A Must-Have Accessory For Any Harley Owner..
Features
- Perfect Fit for Harley Road Glide-Our prewired handlebars are specifically designed to fit 2008-2013 Road Glide FLTR models. Not compatible with the CVO model.
- Hassle-Free Installation - With our pre-wiring, the installation process of our handlebars is quick and straightforward, eliminating the need for complicated wiring procedures. We pre-plumbed the internal wiring and pre-cut the bar end for TBW applications, making them a must-have accessory for any Harley owner.
- Innovative Solution for Pre-2014 Models - Unlike the 2014-2023 touring models, we can't pre-run complete CAN-BUS wiring in 2008-2013 touring handlebars, so we thought of a new solution. We pre-buried most of the control wiring harness, and you only need to cut the wiring harness on the handlebar and connect the pre-embedded wiring harness. This innovation saves you time and effort.
- Premium Material - Our handlebars are made of high-level quality steel, ensuring durability, longevity, and anti-rusting properties. The Automotive Wire and Insulated layer with Chemically Cross-Line Polyethylene make them resistant to moisture, most solvents, and extreme temperatures, making our wires ideal for engine compartment applications.
- Comfortable Riding Experience - Our handlebars are carefully designed to provide a natural, relaxed grip combined with comfortable pull-back distance, reducing the fatigue of long-haul riding, and allowing you to experience the fun of riding without any discomfort.
- Hand-Crafted for High Style and Attitude - Our handlebars are both hand-wired and hand-finished, giving them tons of attitude and comfort with a natural hand position. Designed with beefy 1 1/4 diameter exposed bars and a 1 diameter clamping area, they are perfect for anyone looking for a unique and stylish upgrade.
- Comprehensive Package List - Our package includes 1 installation instruction, 1 prewired handlebar (available in 12, 14 or 16 Classic Chrome or Gloss Black), 1 prewired Handlebar Switch Wiring (for Stock Switches), 1 prewired Plug n Play Twist Grip sensor TBW harness, 1 prewired Plug n Play heated Grip wire, and 1 set of additional Heat Shrink (Includes our Solder Seal pre-soldered/heat shrink connectors).
- Exceptional Customer Support - We provide 24/7 customer service . If you have any questions or concerns, please message us to get a good solution. We are committed to providing the best customer experience possible.
- See more on Amazon...
Brand: TIGERSGATE | Manufacturer: TIGERSGATEPARTS.COM
Weight: 13.23 Pounds
See On Amazon #15
Tigersgate 14" Ape Hanger Handlebar Sportster Extended Front Brake Line/Cable Black Vinyl Stainless Steel Braided for 2004-up Sportster XL non-ABS
Asin: B0C2YL43PH | Model: FXBX014-1 | PartNumber: FXBX014-1 | Ean: 0767950233000 | UPC: 767950233000
Quality You Can Trust: Our Stainless Steel Braided Brake Cable With Black Vinyl Coating Creates This Characteristic Look Without Any Damage To The Areas Where The Cable Touches & Keeps Unwanted Moisture Out Of The Line. And Durable Inner Wire Also Ensures The Whole Cable Has A Longer Life And Better Performance When Using..
Package List: The Package Includes 1 * Front Brake Line And Comes Standard With Polished Silver On Brass Fittings With Matching Bolts, With No Instructions. If You Have Any Questions, Please Feel Free To Message Us Via Amz Message, Thank You..
Easy To Install: Direct Replacement For The Stock Short/Old Brake Line, Just Need You To Remove The Stock Brake Cable Without Damaging The Motorcycle, Then Follow The Correct Route/Steps To Install The New Brake Line, Then All Done..
Note: Please Note That Some Of The Buyers' Motorcycle Needs A Longer Cable Than A Normal Length Because Of The Different Cable Route(Such As Some Motorcycles' Route Requires A Turn). And Please Find A Professional Mechanical Person To Install It If You Do Not Know How To Install The Product..
Better Work: With Advanced Technology And Workmanship, Our Hydraulic Brake Line Hose Will Greatly Improve Your Braking Effectiveness Because There Is Almost No Expansion Under Pressure, Requiring Less Force To Operate At Its Maximum. The Brake Lever Feel Stays Firm (Less Squishy Than Rubber Hoses) At All Times. This Advantage Reduces Braking Distances And Increases The Efficiency Of The Calipers..
Extended Length: The Extension 46.5" Sportster Front Brake Line Is Longer Than Stock To Fit Your Taller Handlebars Or Risers. Please Check The Specific Motorcycle Models On The Description Page Before Purchase, Thank You..
Features
- Fitment: Fits 2004-later non-ABS Sportster XL & 2018-up Softail non-ABS models with 14" handlebar (Except for All Front Dual Discs Models).
- Extended Length: The extension 46.5 Sportster front brake line is longer than stock to fit your taller handlebars or risers. Please check the specific motorcycle models on the description page before purchase, thank you.
- Quality You Can Trust: Our stainless steel braided brake cable with black vinyl coating creates this characteristic look without any damage to the areas where the cable touches & keeps unwanted moisture out of the line. And durable inner wire also ensures the whole cable has a longer life and better performance when using.
- Better Work: With Advanced Technology and Workmanship, our hydraulic brake line hose will greatly improve your braking effectiveness because there is almost no expansion under pressure, requiring less force to operate at its maximum. The brake lever feel stays firm (less squishy than rubber hoses) at all times. This advantage reduces braking distances and increases the efficiency of the calipers.
- Easy to Install: Direct replacement for the stock short/old brake line, just need you to remove the stock brake cable without damaging the motorcycle, then follow the correct route/steps to install the new brake line, then all done.
- Note: Please note that some of the buyers' motorcycle needs a longer cable than a normal length because of the different cable route(such as some motorcycles' route requires a turn). And please find a professional mechanical person to install it if you do not know how to install the product.
- Package List: The package includes 1 * Front Brake Line and comes standard with polished silver on brass fittings with matching bolts, with no instructions. If you have any questions, please feel free to message us via AMZ message, thank you.
- See more on Amazon...
Brand: SHYYGL | Manufacturer: TIGERSGATE.COM
Weight: 0.42 pounds
See On Amazon #16
TIGERSGATE PRE-WIRED 16" Rise Road King Handlebars 1 1/2" Fat Ape Hangers for 2015-2022 Harley Road King, Road King Classic, Black
Asin: B0BN1D9RMC | Model: TIGERSGATE-Harley Ape Hangers-b-11215 | PartNumber: TIGERSGATE-Harley Ape Hangers-b-11215
Quality You Can Trust: Our Pre Wired Road King Handlebars Are Made Of High-Class Quality Steel, Superior Quality And Durable For A Long Service Life, Waterproof & Rust-Proof. Very Stable After Installation. So Its Very Easy To Operate And Upgrade The Safety Of Your Motorcycle..
Stable Construction: Our Road King Ape Hangers Boast High Tensile Strength And A Solid Structure, Making Them Resistant To Breaking And Built To Last..
Craft: Black Powder Coated & Hand-Polished. No Slag Inside The Bar Tubes Makes Installation Easy. Laser Cut, Beveled & De-Burred For Internal Wire Pulling, And Polished To Show Their Quality Finish!.
Eye-Catch Look: The Aggressive Look Meathook Design Gives The Bike A Wicked Cool Look, Which Can Make Your Bike Stand Out From Other Bikes With Ordinary Handlebars, And Attract People's Attention..
Master Craft: Gloss Black & Powder Coated. No Slag Inside The Bar Tubes Makes Installation Easy. Laser Cut, Beveled & De-Burred For Internal Wire Pulling, And Polished To Show Their Quality Finish!.
Pre-Wired: Our Road King Handlebars Are Now Available “Pre-Wired” Direct From The Factory. The Pre-Wired Ape Bars Come With Both Plug & Play Can Bus Control Harnesses And Connectors Installed, Making The Bar Exchange Painless..
Features
- Fitment list Fits 2015-UP Harley Road King FLHR, Road King Classic FLHRCI models.
- PRE-WIRED: Our road king handlebars are now available Pre-Wired direct from the factory. The Pre-Wired Ape Bars come with both plug & play Can bus control harnesses and connectors installed, making the bar exchange painless.
- Quality You Can Trust: Our pre wired road king handlebars are made of high-class quality steel, superior quality and durable for a long service life, waterproof & rust-proof. Very stable after installation. So its very easy to operate and upgrade the safety of your motorcycle.
- Master Craft: Gloss black & powder coated. No slag inside the bar tubes makes installation easy. Laser cut, beveled & de-burred for internal wire pulling, and polished to show their quality finish!
- Craft: Black powder coated & hand-polished. No slag inside the bar tubes makes installation easy. Laser cut, beveled & de-burred for internal wire pulling, and polished to show their quality finish!
- Eye-catch Look: The aggressive look meathook design gives the bike a wicked cool look, which can make your bike stand out from other bikes with ordinary handlebars, and attract people's attention.
- Stable Construction: Our road king ape hangers boast high tensile strength and a solid structure, making them resistant to breaking and built to last.
- See more on Amazon...
Brand: TIGERSGATE | Manufacturer: Jiangmen Taikaiwei Technology Co., Ltd.
See On Amazon #17
TIGERSGATE 14" Ape Hangers Cables Touring Extended Clutch Cable & CAN-Bus & TBW Wires & Brake Line for 2008-2013 Harley Touring Road King/Electra Glide/Street Glide/Road Glide with ABS,Silver
Asin: B0CJDVPR2Q | Ean: 0767950544762 | UPC: 767950544762
Complete Ape Hangers Cables Kit: To Make The Installation More Convenient, We Have Collected All The Wires/Cables That A Taller Bar Required For Installation According To The Motorcycle Model And Year In Advance, So You Don’T Have To Search Everywhere For The Cables Or Wires That Need To Be Changed, Which Greatly Shortens The Installation Time And Looking For Wires, Allows You To Enjoy The Riding Faster!.
Technical Support - 5 Engineers Are Always Online, Solving Any Problems In Time, Just Find Tigersgate's Email In About Seller Profile And Get In Touch..
Easy To Install: Direct Replacements For The Stock Short/Old Wire/Line/Cable, Just Need You To Remove The Stock Wire/Line/Cable Without Damaging The Motorcycle, Then Follow The Correct Route/Steps To Install The New Ape Hangers Wire/Line/Cable, Then All Done..
Package List: 1*Brake Line,1*Can-Bus Wires,1*Tbw Wire,1*Extended Length Clutch Cable.
Cables Quality: Our Stainless Steel Braided Touring Models Extended Cable Kit, Can-Bus Wires, Electronic Throttle Fly By Wire Handlebar Harness(Tbw Wire), And Extended Length Clutch Cable With Black Vinyl Coating Create This Characteristic Look Without Any Damage To The Areas Where The Cable Touches. All The Durable Inner Wires Also Ensure The Whole Cable Has A Longer Life And Better Performance When Used..
Extended Length Cables: The Touring With Abs Models Extension Wiring Kit Is Longer Than The Stock Wires/Cables To Fit Your Taller Handlebars Or Risers. （Please Check The Specific Motorcycle Models On The Description Page Before Purchase, Thank You.）.
Features
- Fitment: This Ape hangers Cables is compatible with 2008-2013 Harley Touring models with ABS Road King Electra Glide Street Glide Road Glide
- Extended Length Cables: The Touring with ABS Models extension wiring kit is longer than the stock wires/cables to fit your taller handlebars or risers. Please check the specific motorcycle models on the description page before purchase, Thank you.
- Complete Ape Hangers Cables Kit: To make the installation more convenient, we have collected all the wires/cables that a taller bar required for installation according to the motorcycle model and year in advance, so you don t have to search everywhere for the cables or wires that need to be changed, which greatly shortens the installation time and Looking for wires, allows you to enjoy the riding faster!
- Cables Quality: Our stainless steel braided touring models Extended Cable Kit, CAN-Bus wires, Electronic Throttle Fly by Wire Handlebar Harness(TBW wire), and Extended Length Clutch Cable with black vinyl coating create this characteristic look without any damage to the areas where the cable touches. All the durable inner wires also ensure the whole cable has a longer life and better performance when used.
- Easy to Install: Direct replacements for the stock short/old wire/line/cable, just need you to remove the stock wire/line/cable without damaging the motorcycle, then follow the correct route/steps to install the new Ape Hangers wire/line/cable, then all done.
- Package list: 1*Brake Line,1*CAN-Bus wires,1*TBW wire,1*Extended Length Clutch Cable
- Technical Support - 5 engineers are always online, solving any problems in time, just find Tigersgate's email in About Seller Profile and get in touch.
- See more on Amazon...
Brand: SHYYGL | Manufacturer: TIGERSGATE.COM
Weight: 2.65 pounds
See On Amazon #18
TIGERSGATE Black 1.25" Diameter Pullback Adjustable 14" Rise Fused Handlebar Compatible with 2015-2020 Road Glide/Road Glide Special/Road Glide Ultra
Asin: B09ZDW1C3L | Model: TIGERSGATE-handlebar-72 | PartNumber: TIGERSGATE-handlebar-72
Adjustable Pullback- You Can Adjust The Handlebar To A Most Comfortable Position Tightly, This Handlebar Is Really The Ideal Choice For The Rider..
Easy To Install - The Handlebar Could Be Easily Installed, Come With Drilled Wiring Holes, Don't Need To Worry About The Edges Chop The Inner Wire, After The Easy Installation, It Will Give You A Wonderful Driving Experience..
Customer Support - We Provide Excellent Service, If You Have Any Questions, Please Leave Us A Message To Get A Satisfactory Solution, We Will Reply You Within One Working Day..
Master Craft - Black Painted & Hand-Polished. No Slag Inside The Bar Tubes Makes Installation Easy. Laser Cut, Beveled & De-Burred For Internal Wire Pulling, And Polished To Show Their Quality Finish..
Quality You Can Trust - Our Handlebars Are Made Of High-Class Quality Steel, The Solid Structure Makes It Durable For Long-Lasting Performance, And Not Easy To Break..
Features
- Fitment - Fits 2015-2023 Harley Touring FLTRX (Road Glide), FLTRXS (Road Glide Special), FLTRU (Road Glide Ultra) models. Do Not fit road glide 3 ( trike ).
- Quality You Can Trust - Our handlebars are made of high-class quality steel, the solid structure makes it durable for long-lasting performance, and not easy to break.
- Adjustable Pullback- You can adjust the handlebar to a most comfortable position tightly, this Handlebar is really the ideal choice for the rider.
- Master Craft - Black painted & hand-polished. No slag inside the bar tubes makes installation easy. Laser cut, beveled & de-burred for internal wire pulling, and polished to show their quality finish.
- Easy to Install - The handlebar could be easily installed, come with drilled wiring holes, don't need to worry about the edges chop the inner wire, after the easy installation, it will give you a wonderful driving experience.
- Customer Support - We provide excellent service, if you have any questions, please leave us a message to get a satisfactory solution, we will reply you within one working day.
- See more on Amazon...
Brand: TIGERSGATE | Manufacturer: Jiangmen Taikaiwei Technology Co., Ltd.
Weight: 10.19 pounds
See On Amazon #19
TIGERSGATE 14" Ape Hangers Cables Touring Front Turn Signals Extension Wire Harness Kit & CAN-Bus & TBW Wires & Brake Line for 2014-2015 Harley Touring with ABS,Black Vinyl
Asin: B0CJDVQ3M9 | Ean: 0767950544946 | UPC: 767950544946
Complete Ape Hangers Cables Kit: To Make The Installation More Convenient, We Have Collected All The Wires/Cables That A Taller Bar Required For Installation According To The Motorcycle Model And Year In Advance, So You Don’T Have To Search Everywhere For The Cables Or Wires That Need To Be Changed, Which Greatly Shortens The Installation Time And Looking For Wires, Allows You To Enjoy The Riding Faster!.
Technical Support - 5 Engineers Are Always Online, Solving Any Problems In Time, Just Find Tigersgate's Email In About Seller Profile And Get In Touch..
Easy To Install: Direct Replacements For The Stock Short/Old Wire/Line/Cable, Just Need You To Remove The Stock Wire/Line/Cable Without Damaging The Motorcycle, Then Follow The Correct Route/Steps To Install The New Ape Hangers Wire/Line/Cable, Then All Done..
A Complete Cable Kit: This Ape Hanger Cable Kit Includes Everything You Need To Replace Your Stock Cables, Including One Upper Extended Hydraulic Brake Line, And Two Lower Extended Hydraulic Brake Lines, One Front Plug & Play Turn Signals Extension Wire Harness Kit;One Throttle-By-Wire Wire Extension Harness(Tbw);One Can Bus Wires; Along With Bolts And Washers. You Won't Need To Go Everywhere To Purchase The Separate Cables, Saving You Time Much..
Cables Quality: Our Stainless Steel Braided Touring Models Brake Line Kit, Front Turn Signals Extension Wire Harness Kit, Electronic Throttle Fly By Wire Handlebar Harness(Tbw Wire), And Can Bus Wires With Black Vinyl Coating Create This Characteristic Look Without Any Damage To The Areas Where The Cable Touches. All The Durable Inner Wires Also Ensure The Whole Cable Has A Longer Life And Better Performance When Used..
Extended Length Cables: The Touring With Abs Models Extension Wiring Kit Is Longer Than The Stock Wires/Cables To Fit Your Taller Handlebars Or Risers. （Please Check The Specific Motorcycle Models On The Description Page Before Purchase, Thank You.）.
Features
- Fitment: This Ape hanger cable is compatible with 2014-2015 Harley Touring models with ABS ,Hydraulic Clutch Road King Electra Glide Street Glide Road Glide If you are a 2016 touring model, please contact us for a replacement TBW (Throttle Fly by Wire)
- Extended Length Cables: The Touring with ABS Models extension wiring kit is longer than the stock wires/cables to fit your taller handlebars or risers. Please check the specific motorcycle models on the description page before purchase, Thank you.
- Complete Ape Hangers Cables Kit: To make the installation more convenient, we have collected all the wires/cables that a taller bar required for installation according to the motorcycle model and year in advance, so you don t have to search everywhere for the cables or wires that need to be changed, which greatly shortens the installation time and Looking for wires, allows you to enjoy the riding faster!
- Cables Quality: Our stainless steel braided touring models Brake Line Kit, Front Turn Signals Extension Wire Harness Kit, Electronic Throttle Fly by Wire Handlebar Harness(TBW wire), and CAN Bus wires with black vinyl coating create this characteristic look without any damage to the areas where the cable touches. All the durable inner wires also ensure the whole cable has a longer life and better performance when used.
- Easy to Install: Direct replacements for the stock short/old wire/line/cable, just need you to remove the stock wire/line/cable without damaging the motorcycle, then follow the correct route/steps to install the new Ape Hangers wire/line/cable, then all done.
- A Complete Cable Kit: This ape hanger cable kit includes everything you need to replace your stock cables, including one upper extended hydraulic brake line, and two lower extended hydraulic brake lines, one Front Plug & Play Turn Signals Extension Wire Harness Kit;one Throttle-by-Wire Wire Extension Harness(TBW);one CAN Bus wires; along with bolts and washers. You won't need to go everywhere to purchase the separate cables, saving you time much.
- Technical Support - 5 engineers are always online, solving any problems in time, just find Tigersgate's email in About Seller Profile and get in touch.
- See more on Amazon...
Brand: SHYYGL | Manufacturer: TIGERSGATE.COM
Weight: 2.65 pounds
See On Amazon #20
TIGERSGATE 14'' Rise Chrome Ape Hangers Chizeled bar Wire Easily Handlebar with Shield Plugs Perfect for Harley Dyna Softail Sportster XL 883 1200 & 1994-2022 Road King & 1998-2013 Road Glide
Asin: B09MS96YB6 | Model: TIGERSGATE-B-32 | PartNumber: TIGERSGATE-B-32
Quality Material: Made Of High Tensile Strength Carbon Steel, This Handlebar Is Built To Last. The Bar's Solid Structure Makes It Durable And Long-Lasting..
Please Note: This Is A Custom Aftermarket Item, Not Oem. Fits Listed Models; But Modifications May Be Needed. We Highly Suggest Professional Installation. Please Confirm Fitment Before Purchase And Seek Local Dealer Assistance For Install Queries. For Other Issues, Msg Us Via Amz Msg Before Returns Or Expressing Dissatisfaction; We'll Provide Satisfactory Solutions. We Appreciate Your Understanding Cause It Is Really Hard To Send The Parts From Our Engineers To You. Thanks..
Comfortable: Carefully Engineered To Provide Natural, Relaxed Grip Angles Combined With Optimal Pullback Comfort, This Handlebar Is A Direct Bolt-On Replacement For Stock Equipment..
Classic Chopper Style: Achieve Classic Chopper Style With The Chizeled Bar's Edgy Profile And The Combination Of A Mini-Ape's Hands-Up Feel And The Narrow Width Of A Drag Bar..
Stylish Design: The Diamond-Textured Knurl Design Provides A Firm Grip On The Riser Without Vibration, And The Powder-Coated Finish Ensures That There Are No Scratches On The Surface. The Chizeled Bar Features The Edgy Profile Of The Classic Z Bar, And Combines The Hands-Up Feel Of A Mini-Ape With The Narrow Width Of A Drag Bar..
Easy Wiring: Pre-Drilled Wire Holes And Polished Edges Make Installation A Breeze, While The End Of The Base Steel Tube Is Designed To Open, Which Helps You Install Your Wire. The Road Glide Handlebar Features Removable Bar & Shield Plugs To Simplify Internal Wiring And Presents A Clean Look Surface..
Features
- Perfect Fitment: These ape hangers are Designed specifically for 2006 2017 Dyna Street Bobs FXDB, 2012 2016 Dyna Switchbacks FLD, 1993-2015 Dyna Low Riders FXDLS, 2000-2017 Softail FLSS, FLSTC, FLSTF, FLSTFB, FLSTFBS, FLSTN, FXST, FXSTB, FXSTC, 1996-2013 Road Glide and 1995-up Road King models, as well as 18-later Softail models (excluding FXBR, FXBRS, FXFB and FXFBS).
- Easy Wiring: Pre-drilled wire holes and polished edges make installation a breeze, while the end of the base steel tube is designed to open, which helps you install your wire. The road glide handlebar features removable Bar & Shield plugs to simplify internal wiring and presents a clean look surface.
- Quality Material: Made of high tensile strength carbon steel, this handlebar is built to last. the bar's solid structure makes it durable and long-lasting.
- Stylish Design: The diamond-textured knurl design provides a firm grip on the riser without vibration, and the powder-coated finish ensures that there are no scratches on the surface. The Chizeled Bar features the edgy profile of the classic Z bar, and combines the hands-up feel of a mini-ape with the narrow width of a drag bar.
- Comfortable: Carefully engineered to provide natural, relaxed grip angles combined with optimal pullback comfort, this handlebar is a direct bolt-on replacement for stock equipment.
- Classic Chopper Style: Achieve classic chopper style with the Chizeled Bar's edgy profile and the combination of a mini-ape's hands-up feel and the narrow width of a drag bar.
- Please Note: This is a custom aftermarket item, not OEM. Fits listed models; but modifications may be needed. We highly suggest professional installation. Please confirm fitment before purchase and seek local dealer assistance for install queries. For other issues, MSG us via AMZ MSG before returns or expressing dissatisfaction; we'll provide satisfactory solutions. We appreciate your understanding cause it is really hard to send the parts from our engineers to you. Thanks.
- See more on Amazon...
Brand: TIGERSGATE | Manufacturer: TIGERSGATE
Dimensions: 0.04 x 31.00 x 14.00 inches
See On Amazon
Looking For Something Else?
Search