Xuhal Fire Sprinkler Covers Fire Department Connection Caps Red with Screws Aluminum FDC Connection Fire Sprinkler Stop Valve Fire Hose Fitting Fire Sprinkler Head for Fire Hydrant Accessory(4 Pcs)
Asin: B0C33J858C
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy Operation: This Sprinkler Winter Cover Is Easy To Install, You Can Directly Use The Attached Screw To Put It In The Eye Next To The Cover, Align It With The Fire Hydrant, And Then Tighten It By Hand; But Please Do Not Tighten The Nut Too Tightly, So As Not To Be Inconvenient To Replace In The Future.
Size Information: The Inner Diameter Of This Sprinkler Head Protector Is 3.5 Inches, The Outer Diameter Is 4.72 Inches, And The Thickness Of The Cover Is 0.51 Inches; Each Cover Comes With 2 Nuts And 2 Screws That Fit This Cover For Your Convenience.
Last And Durable: These Fire Sprinkler Covers Can Prevent Foreign Matter From Entering The Hydrant And Protect The Female Threads On The Fire Department Inlet Connection (Fdc); Unlike Ordinary Plastic Shower Caps, Ours Is Made Of Aluminum, Which Can Withstand High And Low Temperatures Without Deforming, So You Can Use It With Confidence.
Quality Aluminum: These Fire Department Connection Caps Are Made Of Forged Aluminum; The Outdoor Sprinkler Cover Is Rust And Corrosion Resistant So You Can Use It Exposed To The Sun And Rain.
Features
- Sufficient Quantity: you will receive a total of 4 fire sprinkler head covers, the color is red, each with 2 pieces of eyebolts with nuts, you can use it to connect the female pin lug swivel joint
- Quality Aluminum: these fire department connection caps are made of forged aluminum; The outdoor sprinkler cover is rust and corrosion resistant so you can use it exposed to the sun and rain
- Easy Operation: this sprinkler winter cover is easy to install, you can directly use the attached screw to put it in the eye next to the cover, align it with the fire hydrant, and then tighten it by hand; But please do not tighten the nut too tightly, so as not to be inconvenient to replace in the future
- Last and Durable: these fire sprinkler covers can prevent foreign matter from entering the hydrant and protect the female threads on the fire department inlet connection (FDC); Unlike ordinary plastic shower caps, ours is made of aluminum, which can withstand high and low temperatures without deforming, so you can use it with confidence
- Size Information: the inner diameter of this sprinkler head protector is 3.5 inches, the outer diameter is 4.72 inches, and the thickness of the cover is 0.51 inches; Each cover comes with 2 nuts and 2 screws that fit this cover for your convenience
- See more on Amazon...
Brand: Xuhal | Manufacturer: Xuhal
See On Amazon Similar To Xuhal Fire Sprinkler Covers Fire
#1
Tyco LFII White Flat Cover Plate - 139 Degrees
Asin: B01MR82B90 | Model: 43237-2 | PartNumber: 43237-2 | Ean: 7426814178828
Brand: Tyco
Weight: 0.02 pounds
See On Amazon #2
FDC Connection - Fire Department Connection Caps - Red Fire Sprinkler Covers - Fire Department Caps - 2 Pack
Asin: B07C33W6FJ | Model: 1104 | PartNumber: 1104 | Ean: 0717410534246 | UPC: 717410534246
Bolts And Nuts Included.
Color - Red Painted Finish.
Diameter Of Circle Is 3 5/8" (Not Including Tabs).
Two Fire Department Connection Caps.
Features
- Aluminum Red Fire Sprinkler Covers
- Two Fire Department Connection Caps
- Bolts and Nuts Included
- Diameter of circle is 3 5/8 (not including tabs)
- Color - Red Painted Finish
- See more on Amazon...
Brand: FireHoseDirect | Manufacturer: FireHoseDirect
See On Amazon #3
Tyco RFII White Flat Cover Plate - 139 Degrees
Asin: B01MUCPSRA | Model: TYCORFII | PartNumber: TYCORFII | Ean: 7426814178811
Brand: Tyco
See On Amazon #4
Metal Magery FDC Caps - Metal Fire Department Connection Caps - Red Breakable Fire Department Caps - 2 Pack
Asin: B0BG945DSG | Model: MMFDCCaps | PartNumber: MMFDCCaps
Made Of Cast Aluminum Not Plastic : Get Back Up To Code Quickly With These Cast Aluminum Fire Department Caps. Unlike Plastic Caps These Metal Caps Will Withstand The Elements Both Hot And Cold Temperatures. Rain Snow Sleet Or Shine, These Fdc Caps Will Last..
Dimensions: Inner Diameter: 2-1/2" Outer Diameter: 3-1/2" Holes: 4" Apart | Material: Aluminum With Red Paint | Each Set Includes Two Caps And 4 Eyelets With Nuts For 21/2â Swivels.
Installation: While Installation Is A Cinch, Do Not Overtighten The Nuts. Just Hand Tighten The Nuts..
Breakaway Design: Although They Are Made Of Metal These Fire Department Connection Caps The Tabs Are Designed To Break With Minimal Force..
Features
- High Quality Aluminum: Forged from Durable Aluminum, these FDC Caps are built to withstand years of use. Naturally resistant to rust and corrosion so they'll stand up to the elements for years.
- Breakaway Design: Although they are made of Metal these Fire Department Connection Caps the tabs are designed to break with minimal force.
- Made of Cast Aluminum not plastic : Get back up to code quickly with these cast aluminum Fire Department Caps. Unlike plastic caps these metal caps will withstand the elements both hot and cold temperatures. Rain Snow Sleet or Shine, these FDC Caps will last.
- Installation: While installation is a cinch, do Not overtighten the nuts. Just hand tighten the nuts.
- DIMENSIONS: Inner Diameter: 2-1/2 Outer Diameter: 3-1/2 Holes: 4 Apart | Material: Aluminum with red paint | Each set includes two caps and 4 eyelets with nuts for 21/2 swivels
- See more on Amazon...
Brand: METAL MAGERY | Manufacturer: Metal Magery
Dimensions: 1.00 x 5.00 x 5.00 inches
See On Amazon #5
Happy Tree (12 Pack) 1/2" IPS Fire Sprinkler Head Escutcheon Plate 3/4" Adjustment Range Recessed Two Piece Rosette Cover Trim Ring Chrome
Asin: B08DFRR2YJ | Model: SEC12 | PartNumber: SEC12 | Ean: 0717850031008 | UPC: 717850031008
đ„ăEasy To Installă- The Separable Two-Piece Design Allows Installation Of The Sprinklers And Pressure Testing Of The Fire Protection System/Evaluation Of Leak Tightness, Prior To Installation Of A Suspended Ceiling Or Application Of The Finish Coating To A Fixed Ceiling. It Also Permits The Removal Of Suspended Ceiling Panels, For Access To Building Service Equipment, Without Having To First Shut Down The Fire Protection System And Remove Sprinklers.
đ„ ăNotices Pleaseă- This Fire Sprinkler Cover Is Only For 1/2â Sprinkler Head, Not For 3/4â Sprinkler Head. The Semi-Recessed Escutcheons Must Be Installed And Maintained In Compliance With The Applicable Standards Of The National Fire Protection Association (Nfpa). The Owner Is Responsible For Maintaining Their Fire Protection System And Devices In Proper Operating Condition.
đ„ăAdjustment Designă- Each Two-Piece Escutcheon Provides For Recessed Sprinkler Installations Having Total Adjustments 19.1Mm(3/4â) From The Flush Position. The Adjustment Provided By These Escutcheons Reduces The Accuracy To Which Fixed Piping To The Sprinklers Must Be Cut, While Providing A Decorative Recessed Sprinkler Installation.
đ„ăImprove Function & Decorationă- Absence Of An Sprinkler Escutcheon To Cover A Clearance Hole Can Delay The Sprinkler Head Operation In A Fire Situation. Two-Piece Flush Escutcheon Is Used To Improve The Overall Appearance Of A Sprinkler Installation By Concealing The Clearance Holes Required For The Connecting Piping And Fittings To The Sprinkler. Fire Sprinkler Covers Are Intended For Use In Areas With Finished Walls Or Overhead Ceilings.
Features
- RIGHT SIZE - This fire sprinkler trim ring fit perfectly 1/2" fire sprinkler head, and for both residential and commercial use. Recessed sprinkler head escutcheons are designed for recessed installation with certain pendent and horizontal sidewall fire sprinklers
- IMPROVE FUNCTION & DECORATION - Absence of an sprinkler escutcheon to cover a clearance hole can delay the sprinkler head operation in a fire situation. Two-piece flush escutcheon is used to improve the overall appearance of a sprinkler installation by concealing the clearance holes required for the connecting piping and fittings to the sprinkler. Fire sprinkler covers are intended for use in areas with finished walls or overhead ceilings
- EASY TO INSTALL - The separable two-piece design allows installation of the sprinklers and pressure testing of the fire protection system/evaluation of leak tightness, prior to installation of a suspended ceiling or application of the finish coating to a fixed ceiling. It also permits the removal of suspended ceiling panels, for access to building service equipment, without having to first shut down the fire protection system and remove sprinklers
- ADJUSTMENT DESIGN - Each two-piece escutcheon provides for recessed sprinkler installations having total adjustments 19.1mm(3/4 ) from the flush position. The adjustment provided by these escutcheons reduces the accuracy to which fixed piping to the sprinklers must be cut, while providing a decorative recessed sprinkler installation
- NOTICES PLEASE - This fire sprinkler cover is only for 1/2 sprinkler head, not for 3/4 sprinkler head. The semi-recessed escutcheons must be installed and maintained in compliance with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA). The owner is responsible for maintaining their fire protection system and devices in proper operating condition
- See more on Amazon...
Brand: Happy Tree | Manufacturer: Happy Tree
See On Amazon #6
Happy Tree (12 Pack) 1/2" IPS Fire Sprinkler Head Escutcheon Plate 3/4" Adjustment Range Recessed Two Piece Rosette Cover Trim Ring White
Asin: B08CDZ9CBQ | Model: SEW12 | PartNumber: SEW12 | Ean: 0717850030872 | UPC: 717850030872
đ„ăEasy To Installă- The Separable Two-Piece Design Allows Installation Of The Sprinklers And Pressure Testing Of The Fire Protection System/Evaluation Of Leak Tightness, Prior To Installation Of A Suspended Ceiling Or Application Of The Finish Coating To A Fixed Ceiling. It Also Permits The Removal Of Suspended Ceiling Panels, For Access To Building Service Equipment, Without Having To First Shut Down The Fire Protection System And Remove Sprinklers.
đ„ ăNotices Pleaseă- This Fire Sprinkler Cover Is Only For 1/2â Sprinkler Head, Not For 3/4â Sprinkler Head. The Semi-Recessed Escutcheons Must Be Installed And Maintained In Compliance With The Applicable Standards Of The National Fire Protection Association (Nfpa). The Owner Is Responsible For Maintaining Their Fire Protection System And Devices In Proper Operating Condition.
đ„ăAdjustment Designă- Each Two-Piece Escutcheon Provides For Recessed Sprinkler Installations Having Total Adjustments 19.1Mm(3/4â) From The Flush Position. The Adjustment Provided By These Escutcheons Reduces The Accuracy To Which Fixed Piping To The Sprinklers Must Be Cut, While Providing A Decorative Recessed Sprinkler Installation.
đ„ăImprove Function & Decorationă- Absence Of An Sprinkler Escutcheon To Cover A Clearance Hole Can Delay The Sprinkler Head Operation In A Fire Situation. Two-Piece Flush Escutcheon Is Used To Improve The Overall Appearance Of A Sprinkler Installation By Concealing The Clearance Holes Required For The Connecting Piping And Fittings To The Sprinkler. Fire Sprinkler Covers Are Intended For Use In Areas With Finished Walls Or Overhead Ceilings.
Features
- RIGHT SIZE - This fire sprinkler trim ring fit perfectly 1/2" fire sprinkler head, and for both residential and commercial use. Recessed sprinkler head escutcheons are designed for recessed installation with certain pendent and horizontal sidewall fire sprinklers
- IMPROVE FUNCTION & DECORATION - Absence of an sprinkler escutcheon to cover a clearance hole can delay the sprinkler head operation in a fire situation. Two-piece flush escutcheon is used to improve the overall appearance of a sprinkler installation by concealing the clearance holes required for the connecting piping and fittings to the sprinkler. Fire sprinkler covers are intended for use in areas with finished walls or overhead ceilings
- EASY TO INSTALL - The separable two-piece design allows installation of the sprinklers and pressure testing of the fire protection system/evaluation of leak tightness, prior to installation of a suspended ceiling or application of the finish coating to a fixed ceiling. It also permits the removal of suspended ceiling panels, for access to building service equipment, without having to first shut down the fire protection system and remove sprinklers
- ADJUSTMENT DESIGN - Each two-piece escutcheon provides for recessed sprinkler installations having total adjustments 19.1mm(3/4 ) from the flush position. The adjustment provided by these escutcheons reduces the accuracy to which fixed piping to the sprinklers must be cut, while providing a decorative recessed sprinkler installation
- NOTICES PLEASE - This fire sprinkler cover is only for 1/2 sprinkler head, not for 3/4 sprinkler head. The semi-recessed escutcheons must be installed and maintained in compliance with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA). The owner is responsible for maintaining their fire protection system and devices in proper operating condition
- See more on Amazon...
Brand: Happy Tree | Manufacturer: Happy Tree
See On Amazon #7
Metal Magery IPS Fire Sprinkler Escutcheon Head Plate 2 Piece Cover Ring White 1/2" Pack of 6
Asin: B0BK78P5VF | Model: MMFireCovers | PartNumber: MMFireCovers
Easy Installation: The Two Piece Design Is Easily Seperable And Allows For Easy Installtion Of Sprinklers And Pressure Testing. It Also Permits The Removal Of Suspended Ceiling Panels, For Access To Building Service Equipment, Without Having To First Shut Down The Fire Protection System And Remove Sprinklers..
Specifications: | Material: White Powder Coated Metal | Pack Of 6.
Adjustable Depth: Each Two-Piece Escutcheon Allows You To Adjust The Second Piece From The Flush Position. The Adjustment Provided By These Escutcheons Reduces The Accuracy To Which Fixed Piping To The Sprinklers Must Be Cut, While Providing A Decorative Recessed Sprinkler Installation..
High Quality Metal: Forged From Durable Metal And Powder Coated White, These Fire Sprinkler Covers Are Built To Withstand Years Of Use. Naturally Resistant To Rust And Corrosion So Cleaning These Will Be Easy As Well..
Features
- Fire Sprinkler Head Cover: These fire sprinkler escutcheons for 1/2" fire sprinkler head fit perfectly They can be used both residential and commercial applications. Recessed sprinkler head escutcheons are designed for recessed installation with certain pendent and horizontal sidewall fire sprinklers.
- High Quality Metal: Forged from Durable Metal and Powder Coated White, these fire sprinkler covers are built to withstand years of use. Naturally resistant to rust and corrosion so cleaning these will be easy as well.
- Easy Installation: The two piece design is easily seperable and allows for easy installtion of sprinklers and pressure testing. It also permits the removal of suspended ceiling panels, for access to building service equipment, without having to first shut down the fire protection system and remove sprinklers.
- Adjustable Depth: Each two-piece escutcheon allows you to adjust the second piece from the flush position. The adjustment provided by these escutcheons reduces the accuracy to which fixed piping to the sprinklers must be cut, while providing a decorative recessed sprinkler installation.
- Specifications: | Material: White Powder Coated Metal | Pack of 6
- See more on Amazon...
Brand: METAL MAGERY | Manufacturer: Metal Magery
Dimensions: 1.10 x 2.85 x 2.85 Inches
See On Amazon #8
(10 Pack) TunaMax 1/2" Fire Sprinkler Head Cage Guard for Protecting Side Wall & Pendent & Upright Sprinkler Head Cover Red
Asin: B08LPDHJGQ | Model: GR210 | PartNumber: GR210 | Ean: 0705124113468 | UPC: 705124113468
đ©Remium Built: Heavy Iron Wire Construction Fire Sprinkler Head Cover. This Wire Clip Type Sprinkler Head Protector Is Durable And Sturdy Built. Red Coating Is Easily Recognizable Both For Fire Safety Purposes And To Reduce Chances Of Being Accidentally Hit And Burst And Bump.
đ©Attention: Fire Sprinkler Head Guards Provide Protection From Occasional Light Contact, Do Not Protect Sprinkler Heads From Direct Impact Or Abuse. And These Fire Sprinkler Covers Are Only For Exposed Fire Sprinkler Heads, Cannot Be Used With Sprinkler Heads That Are Recessed With Escutcheon Rings.
đ©Wide Application: The Fire Sprinkler Head Protectors Are Suitable For Sprinkler Heads In Either The Upright, Pendent Or Horizontal Sidewall Position. Protect Sprinkler Heads From Being Accidentally Hit And Burst And Bump. These Guards Work Well To Prevent Squirrels And Rodents From Destroying The Adapters And Heads Attached To Our Irrigation System Risers..
đ©Rofessional Protection: The Fire Sprinkler Head Cages Are Designed To Protect 1/2" Sprinkler Heads Devices Against Vandalism Or Accidental Damage. It Is Very Important That Your Sprinkler Heads Remain Untouched And Safe.
Features
- EASY TO INSTALL: One piece double hook sprinkler wire enclosure. Latch hooks exposed for easily installation. No need any tool for install the sprinkler head cage. Release the two hooks on both sides of the cage, put on the sprinkler head, then recover hooking. The installation can be completed without any tool
- ROFESSIONAL PROTECTION: The fire sprinkler head cages are designed to protect 1/2 sprinkler heads devices against vandalism or accidental damage. It is very important that your sprinkler heads remain untouched and safe
- REMIUM BUILT: Heavy iron wire construction fire sprinkler head cover. This wire clip type sprinkler head protector is durable and sturdy built. Red coating is easily recognizable both for fire safety purposes and to reduce chances of being accidentally hit and burst and bump
- WIDE APPLICATION: The fire sprinkler head protectors are suitable for sprinkler heads in either the upright, pendent or horizontal sidewall position. Protect sprinkler heads from being accidentally hit and burst and bump. These guards work well to prevent squirrels and rodents from destroying the adapters and heads attached to our irrigation system risers.
- ATTENTION: Fire sprinkler head guards provide protection from occasional light contact, do not protect sprinkler heads from direct impact or abuse. And these fire sprinkler covers are only for exposed fire sprinkler heads, cannot be used with sprinkler heads that are recessed with escutcheon rings
- See more on Amazon...
Brand: TunaMax | Manufacturer: TunaMax
See On Amazon #9
Fire Sprinkler Head Paint Cover - Head Protector, Head Covers for Painting, Protection Covers for Ceiling Pop Out, Head Guard and Head Paint Protection for Covering Recessed Sprinkler Heads - 4 PK
Asin: B0CLHNM6RQ | Ean: 0640711143681 | UPC: 640711143681
Highly Visible: These Highly Visible Red Covers Are Easy To Spot During The Job To Avoid Mistakes Or Accidental Damage. Always Promptly Remove These Once The Job Is Done..
Warning: Caps Must Be Removed And Outer Ring Of Escutcheon Replaced After Painting To Allow Sprinkler Head To Perform Properly If A Fire Should Occur..
Good Fit And Reusable: These Fire Sprinkler Paint Covers Are 2-13/16 In. Deep And Fit Over Most Flush And Recessed Pendent Or Sidewall Fire Sprinklers. They Are Also Cleanable And Reusable..
Cost-Effective Solution: Using Our Paint Covers Saves Time, Money, And Trouble By Avoiding Costly Sprinkler Replacements Due To Paint Damage..
Features
- NFPA 25 Requirement: This paint cover protects from unwanted painting of your sprinkler head which causes it not to function properly in the event of fire. Painted sprinkler heads must be replaced.
- Cost-Effective Solution: Using our paint covers saves time, money, and trouble by avoiding costly sprinkler replacements due to paint damage.
- Highly Visible: These highly visible red covers are easy to spot during the job to avoid mistakes or accidental damage. Always promptly remove these once the job is done.
- Good Fit and Reusable: These fire sprinkler paint covers are 2-13/16 in. deep and fit over most flush and recessed pendent or sidewall fire sprinklers. They are also cleanable and reusable.
- WARNING: Caps must be removed and outer ring of escutcheon replaced after painting to allow sprinkler head to perform properly if a fire should occur.
- See more on Amazon...
Brand: Knupp Co. | Manufacturer: Knupp Co.
See On Amazon #10
Happy Tree (6 Pack) 3/4" IPS Fire Sprinkler Head Escutcheon Plate Standard Cover Trim Ring Two Piece Rosette Chrome
Asin: B08CR2T2DX | Model: SEC0675 | PartNumber: SEC0675 | Ean: 0717850030933 | UPC: 717850030933
đ„ăEasy To Installă- The Separable Two-Piece Design Allows Installation Of The Sprinklers And Pressure Testing Of The Fire Protection System/Evaluation Of Leak Tightness, Prior To Installation Of A Suspended Ceiling Or Application Of The Finish Coating To A Fixed Ceiling. It Also Permits The Removal Of Suspended Ceiling Panels, For Access To Building Service Equipment, Without Having To First Shut Down The Fire Protection System And Remove Sprinklers.
đ„ ăNotices Pleaseă- This Fire Sprinkler Cover Is Only For 3/4â Sprinkler Head, Not For 1/2â Sprinkler Head. The Escutcheons Must Be Installed And Maintained In Compliance With The Applicable Standards Of The National Fire Protection Association (Nfpa). The Owner Is Responsible For Maintaining Their Fire Protection System And Devices In Proper Operating Condition.
đ„ăDecoration Designă- Two-Piece Flush Escutcheon Is Used To Improve The Overall Appearance Of A Sprinkler Installation By Concealing The Clearance Holes Required For The Connecting Piping And Fittings To The Sprinkler, While Providing A Decorative Sprinkler Installation.
đ„ăImprove Functionă- Absence Of An Sprinkler Escutcheon To Cover A Clearance Hole Can Delay The Sprinkler Head Operation In A Fire Situation. Fire Sprinkler Covers Are Intended For Use In Areas With Finished Walls Or Overhead Ceilings.
Features
- RIGHT SIZE - This fire sprinkler trim ring fit perfectly 3/4" fire sprinkler head, and for both residential and commercial use. Sprinkler head escutcheons are designed for installation with certain pendent and horizontal sidewall fire sprinklers
- IMPROVE FUNCTION - Absence of an sprinkler escutcheon to cover a clearance hole can delay the sprinkler head operation in a fire situation. Fire sprinkler covers are intended for use in areas with finished walls or overhead ceilings
- EASY TO INSTALL - The separable two-piece design allows installation of the sprinklers and pressure testing of the fire protection system/evaluation of leak tightness, prior to installation of a suspended ceiling or application of the finish coating to a fixed ceiling. It also permits the removal of suspended ceiling panels, for access to building service equipment, without having to first shut down the fire protection system and remove sprinklers
- DECORATION DESIGN - Two-piece flush escutcheon is used to improve the overall appearance of a sprinkler installation by concealing the clearance holes required for the connecting piping and fittings to the sprinkler, while providing a decorative sprinkler installation
- NOTICES PLEASE - This fire sprinkler cover is only for 3/4 sprinkler head, not for 1/2 sprinkler head. The escutcheons must be installed and maintained in compliance with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA). The owner is responsible for maintaining their fire protection system and devices in proper operating condition
- See more on Amazon...
Brand: Happy Tree | Manufacturer: Happy Tree
See On Amazon #11
Happy Tree (6 Pack) 1/2" IPS Fire Sprinkler Head Escutcheon Plate 3/4" Adjustment Range Recessed Two Piece Rosette Cover Trim Ring White
Asin: B08CDYCD8W | Model: SEW06 | PartNumber: SEW06 | Ean: 0717850030841 | UPC: 717850030841
đ„ăEasy To Installă- The Separable Two-Piece Design Allows Installation Of The Sprinklers And Pressure Testing Of The Fire Protection System/Evaluation Of Leak Tightness, Prior To Installation Of A Suspended Ceiling Or Application Of The Finish Coating To A Fixed Ceiling. It Also Permits The Removal Of Suspended Ceiling Panels, For Access To Building Service Equipment, Without Having To First Shut Down The Fire Protection System And Remove Sprinklers.
đ„ ăNotices Pleaseă- This Fire Sprinkler Cover Is Only For 1/2â Sprinkler Head, Not For 3/4â Sprinkler Head. The Semi-Recessed Escutcheons Must Be Installed And Maintained In Compliance With The Applicable Standards Of The National Fire Protection Association (Nfpa). The Owner Is Responsible For Maintaining Their Fire Protection System And Devices In Proper Operating Condition.
đ„ăAdjustment Designă- Each Two-Piece Escutcheon Provides For Recessed Sprinkler Installations Having Total Adjustments 19.1Mm(3/4â) From The Flush Position. The Adjustment Provided By These Escutcheons Reduces The Accuracy To Which Fixed Piping To The Sprinklers Must Be Cut, While Providing A Decorative Recessed Sprinkler Installation.
đ„ă Improve Function & Decorationă- Absence Of An Sprinkler Escutcheon To Cover A Clearance Hole Can Delay The Sprinkler Head Operation In A Fire Situation. Two-Piece Flush Escutcheon Is Used To Improve The Overall Appearance Of A Sprinkler Installation By Concealing The Clearance Holes Required For The Connecting Piping And Fittings To The Sprinkler. Fire Sprinkler Covers Are Intended For Use In Areas With Finished Walls Or Overhead Ceilings.
Features
- RIGHT SIZE - This fire sprinkler trim ring fit perfectly 1/2" fire sprinkler head, and for both residential and commercial use. Recessed sprinkler head escutcheons are designed for recessed installation with certain pendent and horizontal sidewall fire sprinklers
- IMPROVE FUNCTION & DECORATION - Absence of an sprinkler escutcheon to cover a clearance hole can delay the sprinkler head operation in a fire situation. Two-piece flush escutcheon is used to improve the overall appearance of a sprinkler installation by concealing the clearance holes required for the connecting piping and fittings to the sprinkler. Fire sprinkler covers are intended for use in areas with finished walls or overhead ceilings
- EASY TO INSTALL - The separable two-piece design allows installation of the sprinklers and pressure testing of the fire protection system/evaluation of leak tightness, prior to installation of a suspended ceiling or application of the finish coating to a fixed ceiling. It also permits the removal of suspended ceiling panels, for access to building service equipment, without having to first shut down the fire protection system and remove sprinklers
- ADJUSTMENT DESIGN - Each two-piece escutcheon provides for recessed sprinkler installations having total adjustments 19.1mm(3/4 ) from the flush position. The adjustment provided by these escutcheons reduces the accuracy to which fixed piping to the sprinklers must be cut, while providing a decorative recessed sprinkler installation
- NOTICES PLEASE - This fire sprinkler cover is only for 1/2 sprinkler head, not for 3/4 sprinkler head. The semi-recessed Escutcheons must be installed and maintained in compliance with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA). The owner is responsible for maintaining their fire protection system and devices in proper operating condition
- See more on Amazon...
Brand: Happy Tree | Manufacturer: Happy Tree
See On Amazon #12
Happy Tree (4 Pack) White Fire Sprinkler Head Guard Cover for Both 1/2" & 3/4" Sprinkler Head 6" Deep Cage
Asin: B079KN885B | Model: FSG06W04 | PartNumber: FSG06W04
đ„ăPremium Builtă- Heavy Iron Wire Construction Protective Cage, Mounting Hard Wares Are Included. This Wire Clip Type Sprinkler Head Protector Is Durable And Sturdy Built. Fire Sprinkler Head Cover Is Welded At All Points For Strength, Strong Protection. Protect Sprinkler Head Devices Against Vandalism Or Accidental Damage.
đ„ăAttentions Pleaseă- Fire Sprinkler Head Guards Provide Protection From Occasional Light Contact, Do Not Protect Sprinkler Heads From Direct Impact Or Abuse. And The Fire Sprinkler Guard Is Only For Sprinkler Heads With Deep Cup And Skirt Escutcheon, Not For Exposed Fire Sprinkler Heads.
đ„ăWide Applicationă- The Fire Sprinkler Head Protector Is For Use In Fire Suppression Systems. Every Parent With Children Needs These Sprinkler Head Protectors. It Is Also Designed For Basement, Storage Garage, Schools, Hospitals, Hotels, Restaurants, Shops, Commercial Buildings, Universities, Prisons, Hud Projects, Parks And Other Public Locations Where Both Functionality And Aesthetics Count.
đ„ăProfessional Protectionă- These 6â Deep Fire Sprinkler Head Cages Are Designed For Sidewall & Pendent Sprinkler Heads With Deep Cup And Skirt Escutcheon. The Fire Sprinkler Cage Is Suitable For Both 1/2" And 3/4" Fire Head, And Both Ceiling Mount And Drywall-Mounted Sprinkler Head. The Fire Sprinkler Head Covers Protect Sprinkler Heads From Being Accidentally Hit And Burst And Bump. It Is Very Important Your Fire Sprinkler Head Remains Untouched And Safe.
Features
- EASY TO INSTALL - The fire sprinkler head cover is provided with three wire-formed eyelets for a solid installation. The three eyelets are in a equilateral triangle. So when you mark the hole location, NO NEED of noting orientation. The holes would line up after you drill. Very easy to install, save your time
- PROFESSIONAL PROTECTION - These 6 deep fire sprinkler head cages are designed for sidewall & pendent sprinkler heads with deep cup and skirt escutcheon. The fire sprinkler cage is suitable for both 1/2 and 3/4 fire head, and both ceiling mount and drywall-mounted sprinkler head. The fire sprinkler head covers protect sprinkler heads from being accidentally hit and burst and bump. It is very important your fire sprinkler head remains untouched and safe
- PREMIUM BUILT - Heavy iron wire construction protective cage, mounting hard wares are included. This wire clip type sprinkler head protector is durable and sturdy built. Fire sprinkler head cover is welded at all points for strength, strong protection. Protect sprinkler head devices against vandalism or accidental damage
- WIDE APPLICATION - The fire sprinkler head protector is for use in fire suppression systems. Every parent with children needs these sprinkler head protectors. It is also designed for basement, storage garage, schools, hospitals, hotels, restaurants, shops, commercial buildings, universities, prisons, HUD projects, parks and other public locations where both functionality and aesthetics count
- ATTENTIONS PLEASE - Fire sprinkler head guards provide protection from occasional light contact, do not protect sprinkler heads from direct impact or abuse. And the fire sprinkler guard is only for sprinkler heads with deep cup and skirt escutcheon, not for exposed fire sprinkler heads
- See more on Amazon...
Brand: Happy Tree | Manufacturer: Happy Tree
Dimensions: 6.00 x 5.40 x 4.50 inches | Weight: 0.15 pounds
See On Amazon #13
TunaMax (2 Pack) 3/4" IPS Fire Sprinkler Escutcheons Standard Sprinkler Head Cover Plate Trim Ring White
Asin: B08BL2VT8X | Model: EW02L | PartNumber: EW02L | Ean: 0705124113574 | UPC: 705124113574
đïž The Separable Two-Piece Design Allows Installation Of The Sprinklers And Pressure Testing Of The Fire Protection System/Evaluation Of Leak Tightness, Prior To Installation Of A Suspended Ceiling Or Application Of The Finish Coating To A Fixed Ceiling. It Also Permits The Removal Of Suspended Ceiling Panels, For Access To Building Service Equipment, Without Having To First Shut Down The Fire Protection System And Remove Sprinklers.
đïž This Fire Sprinkler Cover Is Only For 3/4â Sprinkler Head, Not For 1/2â Sprinkler Head. The Escutcheons Must Be Installed And Maintained In Compliance With The Applicable Standards Of The National Fire Protection Association (Nfpa). The Owner Is Responsible For Maintaining Their Fire Protection System And Devices In Proper Operating.
đïžTwo-Piece Flush Escutcheon Is Used To Improve The Overall Appearance Of A Sprinkler Installation By Concealing The Clearance Holes Required For The Connecting Piping And Fittings To The Sprinkler.
đïž Absence Of A Sprinkler Escutcheon To Cover A Clearance Hole Can Delay The Sprinkler Head Operation In A Fire Situation. Fire Sprinkler Covers Are Intended For Use In Areas With Finished Walls Or Overhead Ceilings.
Features
- This fire sprinkler trim ring fit perfectly 3/4" fire sprinkler head, and for both residential and commercial use. Sprinkler head escutcheons are designed for installation with certain pendent and horizontal sidewall fire sprinklers
- Absence of a sprinkler escutcheon to cover a clearance hole can delay the sprinkler head operation in a fire situation. Fire sprinkler covers are intended for use in areas with finished walls or overhead ceilings
- The separable two-piece design allows installation of the sprinklers and pressure testing of the fire protection system/evaluation of leak tightness, prior to installation of a suspended ceiling or application of the finish coating to a fixed ceiling. It also permits the removal of suspended ceiling panels, for access to building service equipment, without having to first shut down the fire protection system and remove sprinklers
- Two-piece flush escutcheon is used to improve the overall appearance of a sprinkler installation by concealing the clearance holes required for the connecting piping and fittings to the sprinkler
- This fire sprinkler cover is only for 3/4 sprinkler head, not for 1/2 sprinkler head. The escutcheons must be installed and maintained in compliance with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA). The owner is responsible for maintaining their fire protection system and devices in proper operating
- See more on Amazon...
Brand: TunaMax | Manufacturer: TunaMax
See On Amazon #14
Happy Tree (2 Pack) 3/4" IPS Fire Sprinkler Head Escutcheon Plate Standard Cover Trim Ring Two Piece Rosette Chrome
Asin: B08DQS2T7J | Model: SEC0275 | PartNumber: SEC0275 | Ean: 0717850031084 | UPC: 717850031084
đ„ăEasy To Installă- The Separable Two-Piece Design Allows Installation Of The Sprinklers And Pressure Testing Of The Fire Protection System/Evaluation Of Leak Tightness, Prior To Installation Of A Suspended Ceiling Or Application Of The Finish Coating To A Fixed Ceiling. It Also Permits The Removal Of Suspended Ceiling Panels, For Access To Building Service Equipment, Without Having To First Shut Down The Fire Protection System And Remove Sprinklers.
đ„ ăNotices Pleaseă- This Fire Sprinkler Cover Is Only For 3/4â Sprinkler Head, Not For 1/2â Sprinkler Head. The Escutcheons Must Be Installed And Maintained In Compliance With The Applicable Standards Of The National Fire Protection Association (Nfpa). The Owner Is Responsible For Maintaining Their Fire Protection System And Devices In Proper Operating Condition.
đ„ăDecoration Designă- Two-Piece Flush Escutcheon Is Used To Improve The Overall Appearance Of A Sprinkler Installation By Concealing The Clearance Holes Required For The Connecting Piping And Fittings To The Sprinkler, While Providing A Decorative Sprinkler Installation.
đ„ăImprove Functionă- Absence Of An Sprinkler Escutcheon To Cover A Clearance Hole Can Delay The Sprinkler Head Operation In A Fire Situation. Fire Sprinkler Covers Are Intended For Use In Areas With Finished Walls Or Overhead Ceilings.
Features
- RIGHT SIZE - This fire sprinkler trim ring fit perfectly 3/4" fire sprinkler head, and for both residential and commercial use. Sprinkler head escutcheons are designed for installation with certain pendent and horizontal sidewall fire sprinklers
- IMPROVE FUNCTION - Absence of an sprinkler escutcheon to cover a clearance hole can delay the sprinkler head operation in a fire situation. Fire sprinkler covers are intended for use in areas with finished walls or overhead ceilings
- EASY TO INSTALL - The separable two-piece design allows installation of the sprinklers and pressure testing of the fire protection system/evaluation of leak tightness, prior to installation of a suspended ceiling or application of the finish coating to a fixed ceiling. It also permits the removal of suspended ceiling panels, for access to building service equipment, without having to first shut down the fire protection system and remove sprinklers
- DECORATION DESIGN - Two-piece flush escutcheon is used to improve the overall appearance of a sprinkler installation by concealing the clearance holes required for the connecting piping and fittings to the sprinkler, while providing a decorative sprinkler installation
- NOTICES PLEASE - This fire sprinkler cover is only for 3/4 sprinkler head, not for 1/2 sprinkler head. The escutcheons must be installed and maintained in compliance with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA). The owner is responsible for maintaining their fire protection system and devices in proper operating condition
- See more on Amazon...
Brand: Happy Tree | Manufacturer: Happy Tree
See On Amazon #15
2 Pcs Fire Sprinkler Head Protector,Fire Sprinkler Head Covers Ceiling Used for Flush Mount Sprinkler,Heavy Duty Steel with Rubber-Wrapped,Suit 1/2" and 3/4" Sprinkler,Indoor Fire Sprinkler Head Cover
Asin: B0CNC4F6HN | Model: Fire Sprinkler Head Guard Cover | PartNumber: Fire Sprinkler Head Guard Cover
[đđđŹđČ đđ§đŹđđđ„đ„đđđąđšđ§] We Have Carefully Designed Three Uniformly Distributed Installation Holes On The Same Plane For This Fire Sprinkler Head Cage Guard, Allowing You To Only Pre-Mark One Of The Holes During Installation, And The Others Will Automatically Align, Saving You Time And Effort..
[đđąđđ đđđ§đ đ đšđ đđ©đ©đ„đąđđđđąđšđ§đŹ] This Fire Sprinkler Head Protection Is Suitable For A Variety Of Occasions At Home, School, Garage, Hospital, And Factory. It Is Especially Suitable For Customers With Children At Home, Eliminating Your Worries About Accidental Triggers. Whether It's Moving Items Or Renovating The Interior, This Cover Can Ensure Your Sprinkler Safety..
đđšđ«đ«đČ-đ
đ«đđ đđĄđšđ©đ©đąđ§đ đđšđźđ«đ§đđČ! We Always Focus On Customer Needs And Experience. If You Are Not Satisfied With The Fire Sprinkler Head Guard Cover, We Will Respond Immediately And Provide Rapid Refund Services..
[đđąđłđ & đđđđ€đđ đ đđ§đđ„đźđđđŹ] The Size Of Fire Sprinkler Head Protector Is 3.7 Inches In Diameter, 3 Inches In Depth, And 0.16 Inches In Thickness, Suitable For 1/2 Or 3/4 Inch Fire Sprinklers. Each Fire Sprinkler Head Guard Covers Comes With 3 Plastic Plug And 3 Screws With Gaskets To Ensure A Stable Installation..
[đđźđ©đđ«đąđšđ« đđźđđ„đąđđČ] Consisting Of Heavy-Duty Steel Wire Wrapped In White Rubber, With High-Strength Solder Joints. This Fire Sprinkler Head Covers Ceiling Is Not Only Eye-Catching In Appearance, But Also Protects Your Fire Sprinkler Against Strong Shocks..
Features
- [ - ] This fire sprinkler head cover is designed as a cage shape to protect flush-mounted sprinklers. It's sturdy and can withstand impacts from all directions, giving your sprinkler extra safety without affecting its function. It prevents accidental triggering due to misuse.Compared to cleaning a wet interior, installing this protective cover is really super simple.
- [ ] Consisting of heavy-duty steel wire wrapped in white rubber, with high-strength solder joints. This fire sprinkler head covers ceiling is not only eye-catching in appearance, but also protects your fire sprinkler against strong shocks.
- [ ] We have carefully designed three uniformly distributed installation holes on the same plane for this fire sprinkler head cage guard, allowing you to only pre-mark one of the holes during installation, and the others will automatically align, saving you time and effort.
- [ & ] The size of fire sprinkler head protector is 3.7 inches in diameter, 3 inches in depth, and 0.16 inches in thickness, suitable for 1/2 or 3/4 inch fire sprinklers. Each fire sprinkler head guard covers comes with 3 plastic plug and 3 screws with gaskets to ensure a stable installation.
- [ ] This fire sprinkler head protection is suitable for a variety of occasions at home, school, garage, hospital, and factory. It is especially suitable for customers with children at home, eliminating your worries about accidental triggers. Whether it's moving items or renovating the interior, this cover can ensure your sprinkler safety.
- - ! We always focus on customer needs and experience. If you are not satisfied with the fire sprinkler head guard cover, we will respond immediately and provide rapid refund services.
- See more on Amazon...
Brand: LEVENDOR | Manufacturer: levendor
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #16
QWORK 2-1/2" NST/NH Plastic Fire Hose Connection Standpipe Cap Fitting and Chain Fire Equipment, Red - 6 Pack Anti Theft FDC Caps
Asin: B0BSGNMBGJ | Model: WD8925 | PartNumber: WD8925 | Ean: 0795973596376 | UPC: 795973596376
Anti-Theft: The Cover Comes With A Chain To Prevent Loss And Is Very Easy To Use..
Seal: Dust-Proof Seal To Prevent Foreign Matter From Entering The Fdc Thread..
Fire Hose Fittings: Quick Access When A Fire Hose Connection Is Required, Suitable For Some Riser Systems And Connections..
Size: 2-1/2" Male Nst Threads. 6 Pack Covers..
Features
- Durable: Made from thermoplastic material, corrosion resistant and low permeability, including caps and chains.
- Size: 2-1/2 male NST threads. 6 pack covers.
- Anti-theft: The cover comes with a chain to prevent loss and is very easy to use.
- Fire Hose Fittings: Quick access when a fire hose connection is required, suitable for some riser systems and connections.
- Seal: Dust-proof seal to prevent foreign matter from entering the FDC thread.
- See more on Amazon...
Brand: QWORK | Manufacturer: QWORK
See On Amazon #17
Happy Tree (2 Pack) 3/4" IPS Fire Sprinkler Head Escutcheon Plate Standard Cover Trim Ring Two Piece Rosette White
Asin: B07MNKHDXS | Model: SEW0275 | PartNumber: SEW0275 | Ean: 0717850030568 | UPC: 717850030568
đ„ăEasy To Installă- The Separable Two-Piece Design Allows Installation Of The Sprinklers And Pressure Testing Of The Fire Protection System/Evaluation Of Leak Tightness, Prior To Installation Of A Suspended Ceiling Or Application Of The Finish Coating To A Fixed Ceiling. It Also Permits The Removal Of Suspended Ceiling Panels, For Access To Building Service Equipment, Without Having To First Shut Down The Fire Protection System And Remove Sprinklers.
đ„ ăNotices Pleaseă- This Fire Sprinkler Cover Is Only For 3/4â Sprinkler Head, Not For 1/2â Sprinkler Head. The Escutcheons Must Be Installed And Maintained In Compliance With The Applicable Standards Of The National Fire Protection Association (Nfpa). The Owner Is Responsible For Maintaining Their Fire Protection System And Devices In Proper Operating Condition.
đ„ăDecoration Designă- Two-Piece Flush Escutcheon Is Used To Improve The Overall Appearance Of A Sprinkler Installation By Concealing The Clearance Holes Required For The Connecting Piping And Fittings To The Sprinkler, While Providing A Decorative Sprinkler Installation.
đ„ăImprove Functionă- Absence Of An Sprinkler Escutcheon To Cover A Clearance Hole Can Delay The Sprinkler Head Operation In A Fire Situation. Fire Sprinkler Covers Are Intended For Use In Areas With Finished Walls Or Overhead Ceilings.
Features
- RIGHT SIZE - This fire sprinkler trim ring fit perfectly 3/4" fire sprinkler head, and for both residential and commercial use. Sprinkler head escutcheons are designed for installation with certain pendent and horizontal sidewall fire sprinklers
- IMPROVE FUNCTION - Absence of an sprinkler escutcheon to cover a clearance hole can delay the sprinkler head operation in a fire situation. Fire sprinkler covers are intended for use in areas with finished walls or overhead ceilings
- EASY TO INSTALL - The separable two-piece design allows installation of the sprinklers and pressure testing of the fire protection system/evaluation of leak tightness, prior to installation of a suspended ceiling or application of the finish coating to a fixed ceiling. It also permits the removal of suspended ceiling panels, for access to building service equipment, without having to first shut down the fire protection system and remove sprinklers
- DECORATION DESIGN - Two-piece flush escutcheon is used to improve the overall appearance of a sprinkler installation by concealing the clearance holes required for the connecting piping and fittings to the sprinkler, while providing a decorative sprinkler installation
- NOTICES PLEASE - This fire sprinkler cover is only for 3/4 sprinkler head, not for 1/2 sprinkler head. The escutcheons must be installed and maintained in compliance with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA). The owner is responsible for maintaining their fire protection system and devices in proper operating condition
- See more on Amazon...
Brand: Happy Tree
Weight: 0.08 pounds
See On Amazon #18
Happy Tree (2 Pack) 1/2" IPS Fire Sprinkler Head Escutcheon Plate 3/4" Adjustment Range Recessed Two Piece Rosette Cover Trim Ring White
Asin: B08CDXJ87W | Model: SEW02 | PartNumber: SEW02 | Ean: 0717850030865 | UPC: 717850030865
đ„ăEasy To Installă- The Separable Two-Piece Design Allows Installation Of The Sprinklers And Pressure Testing Of The Fire Protection System/Evaluation Of Leak Tightness, Prior To Installation Of A Suspended Ceiling Or Application Of The Finish Coating To A Fixed Ceiling. It Also Permits The Removal Of Suspended Ceiling Panels, For Access To Building Service Equipment, Without Having To First Shut Down The Fire Protection System And Remove Sprinklers.
đ„ ăNotices Pleaseă- This Fire Sprinkler Cover Is Only For 1/2â Sprinkler Head, Not For 3/4â Sprinkler Head. The Semi-Recessed Escutcheons Must Be Installed And Maintained In Compliance With The Applicable Standards Of The National Fire Protection Association (Nfpa). The Owner Is Responsible For Maintaining Their Fire Protection System And Devices In Proper Operating Condition.
đ„ăAdjustment Designă- Each Two-Piece Escutcheon Provides For Recessed Sprinkler Installations Having Total Adjustments 19.1Mm(3/4â) From The Flush Position. The Adjustment Provided By These Escutcheons Reduces The Accuracy To Which Fixed Piping To The Sprinklers Must Be Cut, While Providing A Decorative Recessed Sprinkler Installation.
đ„ă Improve Function & Decorationă- Absence Of An Sprinkler Escutcheon To Cover A Clearance Hole Can Delay The Sprinkler Head Operation In A Fire Situation. Two-Piece Flush Escutcheon Is Used To Improve The Overall Appearance Of A Sprinkler Installation By Concealing The Clearance Holes Required For The Connecting Piping And Fittings To The Sprinkler. Fire Sprinkler Covers Are Intended For Use In Areas With Finished Walls Or Overhead Ceilings.
Features
- RIGHT SIZE - This fire sprinkler trim ring fit perfectly 1/2" fire sprinkler head, and for both residential and commercial use. Recessed sprinkler head escutcheons are designed for recessed installation with certain pendent and horizontal sidewall fire sprinklers
- IMPROVE FUNCTION & DECORATION - Absence of an sprinkler escutcheon to cover a clearance hole can delay the sprinkler head operation in a fire situation. Two-piece flush escutcheon is used to improve the overall appearance of a sprinkler installation by concealing the clearance holes required for the connecting piping and fittings to the sprinkler. Fire sprinkler covers are intended for use in areas with finished walls or overhead ceilings
- EASY TO INSTALL - The separable two-piece design allows installation of the sprinklers and pressure testing of the fire protection system/evaluation of leak tightness, prior to installation of a suspended ceiling or application of the finish coating to a fixed ceiling. It also permits the removal of suspended ceiling panels, for access to building service equipment, without having to first shut down the fire protection system and remove sprinklers
- ADJUSTMENT DESIGN - Each two-piece escutcheon provides for recessed sprinkler installations having total adjustments 19.1mm(3/4 ) from the flush position. The adjustment provided by these escutcheons reduces the accuracy to which fixed piping to the sprinklers must be cut, while providing a decorative recessed sprinkler installation
- NOTICES PLEASE - This fire sprinkler cover is only for 1/2 sprinkler head, not for 3/4 sprinkler head. The semi-recessed Escutcheons must be installed and maintained in compliance with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA). The owner is responsible for maintaining their fire protection system and devices in proper operating condition
- See more on Amazon...
Brand: Happy Tree | Manufacturer: HAPPY TREE
See On Amazon #19
Happy Tree (6 Pack) Fire Sprinkler Head Guard Cage for 1/2" Recessed/Horizontal Sidewall Drywall-Mounted Sprinkler Heads Chrome PlatedProtector Fire Sprinkler Head Cover
Asin: B08CDZGJC8 | Model: G04C06 | PartNumber: G04C06 | Ean: 0717850030902 | UPC: 717850030902
đ„ăPremium Builtă- One Piece Double Hook Sprinkler Wire Enclosure. This Wire Clip Type Sprinkler Head Protector Is Durable. Chrome Plated Cage Is Anti-Corrosion, Ensuring Long Life Use. If You Need More Stable Protection, Please Choose The Guard With Mounting Screws For Installing Through Searching B08ccb6ym3.
đ„ăAttentions Pleaseă- These Fire Sprinkler Covers Are Only For 1/2â Sprinkler Heads, Not For 3/4â Sprinkler Heads. If You Need More Stable Protection, Please Choose The Guard With Mounting Screws For Installing Through Searching B07952jb94. And These Fire Sprinkler Protectors Are Only For Recessed Sprinkler Heads With Escutcheon Rings, Not For Exposed Fire Sprinkler Heads.
đ„ăWide Applicationă-The Fire Sprinkler Head Protectors Are For Sprinkler Heads In Either Pendent Or Horizontal Sidewall Position. The Fire Sprinkler Cage Is For Use In Fire Suppression Systems. Every Parent With Children Needs These Sprinkler Head Protectors. It Is Also Designed For Basement, Schools, Hospitals, Hotels, Restaurants, Shops, Commercial Buildings, Universities, Hud Projects, Parks And Other Public Locations Where Both Functionality And Aesthetics Count.
đ„ăEasy To Installă- Latch Hooks For Easily Installation. No Need Any Tool For Install The Sprinkler Head Cover. Release The Two Hooks On Both Sides Of The Cage, Put On The Sprinkler Head, Then Recover Hooking. Installation Was A Breeze.
Features
- PROFESSIONAL PROTECTION -These fire sprinkler head cages are designed for recessed residential sprinkler heads with escutcheon rings. The fire sprinkler cage is suitable for 1/2" fire head, and both ceiling mount and drywall-mounted sprinkler head. The fire sprinkler head covers protect sprinkler heads from being accidentally hit and burst and bump
- EASY TO INSTALL - Latch hooks for easily installation. No need any tool for install the sprinkler head cover. Release the two hooks on both sides of the cage, put on the sprinkler head, then recover hooking. Installation was a breeze
- PREMIUM BUILT - One piece double hook sprinkler wire enclosure. This wire clip type sprinkler head protector is durable. Chrome plated cage is anti-corrosion, ensuring long life use. If you need more stable protection, please choose the guard with mounting screws for installing through searching B08CCB6YM3
- WIDE APPLICATION -The fire sprinkler head protectors are for sprinkler heads in either pendent or horizontal sidewall position. The fire sprinkler cage is for use in fire suppression systems. Every parent with children needs these sprinkler head protectors. It is also designed for basement, schools, hospitals, hotels, restaurants, shops, commercial buildings, universities, HUD projects, parks and other public locations where both functionality and aesthetics count
- ATTENTIONS PLEASE - These fire sprinkler covers are only for 1/2 sprinkler heads, not for 3/4 sprinkler heads. If you need more stable protection, please choose the guard with mounting screws for installing through searching B07952JB94. And these fire sprinkler protectors are only for recessed sprinkler heads with escutcheon rings, not for exposed fire sprinkler heads
- See more on Amazon...
Brand: Happy Tree | Manufacturer: Happy Tree
Dimensions: 2.95 x 3.35 x 3.15 Inches | Weight: 0.07 pounds
See On Amazon ï»ż
Looking For Something Else?
Search