Diodesy 0-10V LED Digital Dimmer Switch for LED/CFL/Incandescent Bulbs, 120-277V, Single-Pole or 3-Way Dimmer Light Switch, Phrase Cut Dimming 600W max, Cover Plate Included, White
Asin: B0C34XXYT4 | Model: D55159 | PartNumber: D55159
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easier To Operate - These Decorative White Switches Feature Large, Flat On/Off Rocker That Is Easier To Use For People With Physical Impairments..
Multiple Uses - Suitable For Commercial Or Residential Use. For New Installations, Renovations, Or Replacements For Broken Switches. Minimum Load Led 3W / Incandescent 15W. Maximum Load Led 200W / Incandescent 600W. Rated Voltage 120-277 Volts, 60 Hz..
Single Pole Or 3-Way - Easy To Install Into Standard Switch Boxes In 15 Minutes Or Less. Designed For Single Pole Or 3-Way Switching Providing You Flexibility In Your Lighting Setup..
Led Dimming Control - Works With All Types Of Lamps And Fixtures. Use With Dimmable Led, Cfl, Incandescent, And Halogen Bulbs. Sliding Bar Dimmer Control (0-10V) Stays At The Same Level When The Light Is Easily Turned Off And Back On Again, It Offers Smooth, Precise Control Over Your Lighting..
Features
- MODERN DESIGN - The updated design of the Diodesy LED Wall Dimmer Switch will bring a modern touch to any room. The white wall plate blends seamlessly with any modern d cor.
- LED DIMMING CONTROL - Works with all types of lamps and fixtures. Use with dimmable LED, CFL, incandescent, and halogen bulbs. Sliding bar dimmer control (0-10V) stays at the same level when the light is easily turned off and back on again, it offers smooth, precise control over your lighting.
- EASIER TO OPERATE - These decorative white switches feature large, flat on/off rocker that is easier to use for people with physical impairments.
- SINGLE POLE OR 3-WAY - Easy to install into standard switch boxes in 15 minutes or less. Designed for single pole or 3-way switching providing you flexibility in your lighting setup.
- MULTIPLE USES - Suitable for commercial or residential use. For new installations, renovations, or replacements for broken switches. Minimum load LED 3W / Incandescent 15W. Maximum Load LED 200W / Incandescent 600W. Rated Voltage 120-277 Volts, 60 Hz.
- See more on Amazon...
Brand: Diodesy | Manufacturer: Diodesy
Dimensions: 4.75 x 2.87 x 2.87 inches
Warranty: 1 year warranty
See On Amazon Similar To Diodesy 010V LED Digital Dimmer
#1
SUPERNIGHT LED Light Strip Dimmer, DC12V-24V 30A PWM Dimming Controller for Dimmer Knob Adjust Brightness ON/Off Switch with Aluminum Housing (Aluminum Dimmer)
Asin: B07HN1BJWK | Model: 7539579860 | PartNumber: 7539579860
*【Long Lasting And Durable】The High Quality, Sturdy Aluminum Housing Provides Excellent Anti-Corrosion And Heat-Dissipation Capacity, And Ensures A Long-Lasting Performance Even In Harsh Environments..
*【Esay To Connect】The Screw-In Input And Output Terminals, Pre-Drilled Mounting Holes Make The Installation Literally A Breeze..
*【Protect Led Strip Lights】Pwm Digital Dimming Avoids Rush Current And Protects Your Led Lights..
*【Flexible Usage】Compatible With Dc 12V-24V Max 30A Led Light Application, Single Channel Dimming Controller For Single Color 5050 3528 5630 Led Strip Lights..
Features
- * 0%-100% Dimming Freely PWM 0%-100% Dimming Controller easily adjusts the lighting to any brightness, dim or brighten, to meet your different needs and preferences via the rotatable knob.
- * Flexible Usage Compatible with DC 12V-24V MAX 30A LED light application, single channel dimming controller for single color 5050 3528 5630 LED strip lights.
- * Long Lasting and Durable The high quality, sturdy aluminum housing provides excellent anti-corrosion and heat-dissipation capacity, and ensures a long-lasting performance even in harsh environments.
- * Protect LED Strip Lights PWM digital dimming avoids rush current and protects your LED lights.
- * Esay to Connect The screw-in input and output terminals, pre-drilled mounting holes make the installation literally a breeze.
- See more on Amazon...
Brand: SUPERNIGHT | Manufacturer: SUPERNIGHT
Dimensions: 1.57 x 3.54 x 2.56 inches | Weight: 0.00 Pounds
See On Amazon #2
(20 Pcs) MCIGICM 10A10 Rectifier Diode, 10A 1000V R-6 Axial Electronic Silicon Diodes
Asin: B07Q7YNZZF | Model: 10A10 | PartNumber: 10A10 | Ean: 0727040386917 | UPC: 727040386917
Low Reverse Leakage / High Forward Surge Current Capability / High Temperature Soldering.
Pack In A Esd Bag With Main Specs Label, For Long Time Protection And Indetification..
Lead-Free / Rohs Compliant Electronics Component / Molded Plastic Case / Plated Axial Leads / Through Hole.
Features
- Forward Current : 10 A / Maxixum Repetitive Peak Reverse Voltage : 1000 V
- Lead-Free / RoHS Compliant Electronics Component / Molded Plastic Case / Plated Axial Leads / Through Hole
- Low Reverse Leakage / High Forward Surge Current Capability / High Temperature Soldering
- Pack in a ESD Bag with Main Specs Label, for Long Time Protection and Indetification.
- See more on Amazon...
Brand: MCIGICM | Manufacturer: MCIGICM
Dimensions: 0.04 x 0.47 x 0.31 inches | Weight: 0.03 Pounds
See On Amazon #3
Hiletgo 3pcs DC12-24V 8Amp 0%-100% PWM Dimming Controller for LED Lights, Ribbon Lights,Tape Lights,Dimmer is compatible with Hilight, LEDwholesaler, fillite, and others' strips
Asin: B073R7H52B | Model: 3-01-1444 | PartNumber: 3-01-1444
0-100% Fully Pmw Dimmable.
Easy To Operate, Connect The Dc Power Source With The Single Color Led Strip Lights Directly By The Dimmer.
Output: 1 Channel 96W 12V (0-8A).
Output Power: 12V<96W, 24V<192W.
Features
- Input voltage: DC12-24V; Max current: 8A; Output: 1 channel;
- Output power: 12V<96W, 24V<192W
- 0-100% fully PMW dimmable
- Output: 1 Channel 96W 12V (0-8A)
- Easy to operate, connect the DC power source with the single color LED strip lights directly by the dimmer
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
2Pack DC0/1-10V Knob LED Dimmer Mini Controller Rotary Switch PWM Dimming Off for 0-10V / 1-10V Dimmable LED Drivers Electronic Ballasts Controling Interior Light Grow Lamp
Asin: B0912HZ6DM | Model: DD-CM0-10V | PartNumber: DD-CM0-10V | Ean: 0669033885161 | UPC: 669033885161
Easy To Wiring : Brown Line Connecting "+",Blue Line Connecting "-";Compatible With Various 0/1-10V Dimming Signal Drivers ;Do Not Connect It With Ac Power Directly..
0-10V Dimmer Is Small And Practical, It Can Be Used With Downlight, Track Light, Wall Washer Light, Plant Light, Etc. Place The Driver Away From Direct Heat Sources And In Well-Aired Spaces .If The Driver Is Built-In ,Sufficient Ventilation Must Be Ensured..
Dimmer Size : 36*23*36Mm(Including Knob Height); Wire Length:35Cm ;Brown Line Is "+",Blue Line Is "-"..
Dimmer Adjustment Range: 0-100% ; It Also Has Switch On-Off ;Accurate Scale Can Effectively Prevent Reverse Connection And Make It More Convenient To Use..
Features
- 0-10V Dimmer is only need to be connected the 0-10V / 1-10V Dimmable LED Driver or Dimmable electronic ballast .
- Dimmer adjustment range: 0-100% ; it also has switch ON-OFF ;Accurate scale can effectively prevent reverse connection and make it more convenient to use.
- Easy to wiring : Brown line connecting +,Blue line connecting -;Compatible with various 0/1-10V dimming signal drivers ;DO NOT connect it with AC power directly.
- Dimmer size : 36*23*36MM(including knob height); Wire length:35CM ;Brown line is +,Blue line is -.
- 0-10V Dimmer is small and practical, it can be used with downlight, track light, wall washer light, plant light, etc. Place the driver away from direct heat sources and in well-aired spaces .If the driver is built-in ,sufficient ventilation must be ensured.
- See more on Amazon...
Brand: DD BEST DD222 | Manufacturer: DD BEST DD222
Dimensions: 0.00 x 1.26 x 0.00 inches
See On Amazon #5
KEYGMA 0-10V LED Dimmer Switch, Low Voltage Dimmer Switch for Dimmable LED Lights, CFL, Halogen and Incandescent Bulbs, Single-Pole or 3-Way, Wallplate Included, ETL Listed (White, 1 Pack)
Asin: B092ZGJ3PB | Model: KD-11A010V | PartNumber: KD-11A010V | Ean: 0779605252779, 0779605252618 | UPC: 779605252779, 779605252618
Features A Large Rocker Paddle To Turn Lights On/Off Or To Preset Level And A Fluent Slider To Brighten/Dim Lights To Suit Different Activities..
No Neutral Required. Easy To Install And Use. Ac 120V~277V 50~60Hz Input. Single Pole & 3-Way Low Voltage Led Dimmer Switch For Led Lights, Only Support Led/Cfl And Incandescent Lamps With 0-10V Driver..
The 0-10V Led Dimmer Switch Can Be Used In Single Pole Or 3-Way Applications. Providing Precise Full-Range Dimming Control..
For Use With Up To 150 Watts Of Dimmable Led/Cfl And Up To 600 Watts Of Incandescent And Halogen Lamps..
Features
- 0-10V low voltage LED dimmer switch, 5%-100% dimming ability, provide the best dimming performance for dimmable LED lights.
- For use with up to 150 Watts of dimmable LED/CFL and up to 600 Watts of Incandescent and Halogen lamps.
- Features a large rocker paddle to turn lights on/off or to preset level and a fluent slider to brighten/dim lights to suit different activities.
- The 0-10V LED dimmer switch can be used in single pole or 3-way applications. Providing precise full-range dimming control.
- No neutral required. Easy to install and use. AC 120V~277V 50~60Hz input. Single Pole & 3-way low voltage LED dimmer switch for LED lights, ONLY support LED/CFL and Incandescent lamps with 0-10V driver.
- See more on Amazon...
Brand: KEYGMA | Manufacturer: KEYGMA
Dimensions: 2.17 x 1.57 x 4.33 inches
See On Amazon #6
Maxmoral 1pc DC 12V 24V LED Strip Dimmer Switch with DC Female Male Adapter Single Color Mini LED Lamp Lighting Accessories Brightness Adjustable Controller Manual Knob Dimmer Switch White
Asin: B07KW3H7K1 | Model: DIM-12T24V-W1 | PartNumber: DIM-12T24V-W1 | Ean: 0705883164947 | UPC: 705883164947
Knob Operated Control: Rotate The Knob To Turn On/Off The Light Brightness Gradually To The Appropriate Light Intensity. Easy To Use..
Wide Application: Mainly Used To Adjust The Brightness Of Single Color Led Lights, Such As 3528, 5050, 5630 Strip Led Ligths For Urban Lighting, Holiday Atmosphere, Ktv, Gym, Car Lights, Etc..
Dc Standard Plug: 5.5X2.1Mm Male / Female Power Plug Connector, Professional Appearance For Power Cabling, Save Time And More Secure Cable Connection..
Operate Voltage: Dc12-24V; Max Output Current: 2A; Output Power: 5V(10W), 12V(24W), 24V(48W); Output: 1 Channel.
Features
- Type: 1pc White LED Dimmer Switch, be widely used in single color led lamp adjust brightness and switch on/off. Perfect tools for most lighting purpose.
- Operate Voltage: DC12-24V; Max Output Current: 2A; Output Power: 5V(10W), 12V(24W), 24V(48W); Output: 1 channel
- Knob Operated Control: Rotate the knob to turn on/off the light brightness gradually to the appropriate light intensity. Easy to use.
- DC Standard Plug: 5.5x2.1mm male / female power plug connector, professional appearance for power cabling, save time and more secure cable connection.
- Wide Application: Mainly Used To Adjust The Brightness Of Single Color LED Lights, Such as 3528, 5050, 5630 Strip LED ligths for urban lighting, holiday atmosphere, KTV, gym, car lights, etc.
- See more on Amazon...
Brand: Maxmoral | Manufacturer: Maxmoral
Weight: 0.00 Pounds
See On Amazon #7
SUPERNIGHT 12V Dimmer Switch, Dimmer Knob Aluminium Case DC12V-24V 8A Single Channel Knob Dimmer Controller for LED Strip Bulb Lamp Light 5050 3528 5630 Single Color LED Strips
Asin: B00JQ437YM | Model: H&PC-70458 | PartNumber: H&PC-70458 | Ean: 6921407542846
🗽Easy Install With The Screw-In Input And Output Terminals, Pre-Drilled Mounting Holes Provides For Fixed Lighting Projects.
🗽100% - 0 Full Range Dimming Capability And Smooth Dimming Experience With Rotatory Knob, Also Works As On/Off Switch.
🗽Constand Voltage And Constand Current Output, Can Be Connected With Amplifiers To Extend Its Load..
🗽Widely Used For Smd 3528 / 5050 /5630 / 5730 /3014 Single Color Led Strip, Not For Rgb Strip.
Features
- DC 12V 8A single channel inline PWM mini led dimmer controller
- Widely used for SMD 3528 / 5050 /5630 / 5730 /3014 single color led strip, Not for RGB strip
- Easy install with the screw-in input and output terminals, pre-drilled mounting holes provides for fixed lighting projects
- Constand voltage and constand current output, can be connected with amplifiers to extend its load.
- 100% - 0 full range dimming capability and smooth dimming experience with rotatory knob, also works as ON/OFF switch
- See more on Amazon...
Brand: SUPERNIGHT | Manufacturer: SUPERNIGHT
Dimensions: 2.40 x 4.09 x 2.72 Inches | Weight: 0.04 pounds
See On Amazon #8
MEIRIYFA LED Light Strip Dimmer,DC 12V-24V 30A LED Light Strip Dimmer PWM Dimming Controller with ON/Off Switch Knob and Aluminum Case for 5050 3528 LED Strip Lights Adjust Brightness
Asin: B0BLYXZZDM | Model: 2 | PartNumber: 2
▶By Controlling The Voltage And Current Output, You Can Change The Brightness And Shade Of The Lamp. 0%-100% Can Be Dimmed Completely. You Only Need To Rotate The Button To Adjust The Light, Which Fully Meets Your Needs..
▶Screw-In Input And Output Terminals Are Easy To Install. Mainly Used To Adjust A Single Color Led Light/Lamp Strip, Not For Multi-Color Mixed Led Lighting. Please Turn Off The Power Before Installation To Prevent Electric Shock..
▶It Is Designed With Heat Dissipation Holes On The Side To Provide Heat Dissipation Capability And Rapid Heat Dissipation. Adopt High Quality Metal Shell, Durable, More Safe And Reliable..
▶Dc Led Light Single-Channel Dimming Controller With Rotary Switch, Simple Operation, Adjust The Light Is Soft And Stable Without Flicker, Pwm Digital Dimming, Avoid Impact Current, Can Effectively Protect Your Led Light..
Features
- DC 12V-24V LED light single channel dimming controller maximum output 30A, suitable for monochrome LED strip light is mainly used to adjust single color LED lights/lights, such as LED lights, LED modules, RV, deck lights, garden lights etc.
- DC LED light single-channel dimming controller with rotary switch, simple operation, adjust the light is soft and stable without flicker, PWM digital dimming, avoid impact current, can effectively protect your LED light.
- By controlling the voltage and current output, you can change the brightness and shade of the lamp. 0%-100% can be dimmed completely. You only need to rotate the button to adjust the light, which fully meets your needs.
- It is designed with heat dissipation holes on the side to provide heat dissipation capability and rapid heat dissipation. Adopt high quality metal shell, durable, more safe and reliable.
- Screw-in input and output terminals are easy to install. Mainly used to adjust a single color LED light/lamp strip, not for multi-color mixed LED lighting. Please turn off the power before installation to prevent electric shock.
- See more on Amazon...
Brand: MEIRIYFA | Manufacturer: shenzhen milidianzi
Dimensions: 0.39 x 0.10 x 1.97 inches
See On Amazon #9
TronicsPros DC 12V-24V 3A LED Strip Dimmer Switch LED Tape Dimmer Controller PWM Inline Rotary Dimmer 5.5mm x 2.1mm DC Jack for SMD 5050 3528 2835 5630 LED Ribbon LED String Light, Black
Asin: B016TLH9D4 | Ean: 0710185996882 | UPC: 710185996882
Easy To Operate: This Led Dimmer Switch Is Knob-Operated Control. Just Rotate The Knob To Adjust The Brightness Or Simply Turn On/Off The Lights..
Working Voltage: Dc 12V-24V. Working Current: Less Than 3A..
Plug And Play: Standard 5.5Mm X 2.1Mm Dc Barrel Jack Male / Female Connectors, No Cutting And Soldering Required, Easy To Install And Simple To Use..
Pwm Digital Dimming Technology: 0% - 100% Dimming, No Flickers At Low Brightness, Stepless Dimming, Very Smooth..
Features
- Usage: This LED dimmer controller is suitable for LED strip light, LED ribbon, LED rope light, such as SMD 5050/ 3528/ 2835/ 5630 LED tape lights, aquarium lighting, etc.
- PWM Digital Dimming Technology: 0% - 100% dimming, no flickers at low brightness, stepless dimming, very smooth.
- Easy to operate: This LED dimmer switch is knob-operated control. Just rotate the knob to adjust the brightness or simply turn on/off the lights.
- Plug and Play: Standard 5.5mm x 2.1mm DC barrel jack male / female connectors, no cutting and soldering required, easy to install and simple to use.
- Working voltage: DC 12V-24V. Working current: less than 3A.
- See more on Amazon...
Brand: TronicsPros | Manufacturer: TronicsPros
Weight: 0.00 Pounds
See On Amazon #10
INHDBOX Dimmer Switch, DC 12V-24V 18A PWM LED Light Strip Dimmer with Dimmable Slide Remote Control, Adjust Brightness Dimmer Light Switch
Asin: B077PQ1VQY | Model: FC1132 | PartNumber: FC1132 | Ean: 0785382987094 | UPC: 785382987094
Memory Function: The Led Dimmer Switch Has A Memory Function So That It Retains The Last Dimming Level After Switching On Via The Wall Switch..
Package Content & Warranty: 1× Dimmer Switch, 1×Remote Control(3Xaaa Batteries Not Included), 1×User Manual, 1×Cleaning Cloth. Any Issue On Product, Please Don't Hesitate To Contact Us, We Will Response You Asap And Provide The Solution For You..
Wireless Rf Remote Control: The Led String Lights Dimmer Comes With A Rf Remote Control, Which Supports Up To 65Ft Long Range Control With Strong And Stable Signal Transmission..
Upgraded Led Dimmer: 0%-100% Stepless Dimming, Easy Adjustment Of Brightness Through Touch Remote Control To Meet Different Preferences And Needs..
Features
- DC 12V-24V: Please check whether your power supply is a DC power supply before purchasing (this product is only suitable for DC power supply, not for AC power supply).
- Upgraded Led Dimmer: 0%-100% stepless dimming, easy adjustment of brightness through touch remote control to meet different preferences and needs.
- Memory Function: The LED dimmer switch has a memory function so that it retains the last dimming level after switching on via the wall switch.
- Wireless RF Remote Control: The LED string lights dimmer comes with a RF remote control, which supports up to 65FT long range control with strong and stable signal transmission.
- Package Content & Warranty: 1 Dimmer Switch, 1 Remote Control(3xAAA batteries not included), 1 User Manual, 1 Cleaning Cloth. Any issue on product, please don't hesitate to contact us, we will response you ASAP and provide the solution for you.
- See more on Amazon...
Brand: INHDBOX | Manufacturer: INHDBOX
Weight: 0.00 Pounds
See On Amazon #11
DiCUNO 100Pcs 5MM Pre Wired 12V Warm White LED Diodes, 9.4 Inch/24CM Ultra Bright Light Emitting Diodes Assorted Color Kit Box for Circuit Science Experiment, DIY Lighting Projects
Asin: B08GSMS6H2
Firm, Low Voltage Loss And Little Heat Generation. Resistance: 500Ω; Current: 20Ma; Package Quantity: 100 Pieces (Discrepancy: ±1%).
Application: Used Most Commonly For Diy Lighting Projects, Science Circuit Experiments, Signal Indicators, Etc..
[Note]: In Order Not To Damage The Diodes, Please Do Not Use Them At Voltage Over 12V. The Diode Would Dim As The Voltage Reduces, But We Do Not Recommend Voltage Lower Than 9V..
Long Wire Of 9.4 Inch/24Cm, Made Up Of 7 Pure Copper Wires, Can Be Cut According To Your Multiple Needs..
Features
- DiCUNO pre-wired 12V 5MM transparent LED light diodes. Light Color: Warm White (Positive wire: The one without resistor. Please refer to picture 3.)
- Long wire of 9.4 Inch/24CM, made up of 7 pure copper wires, can be cut according to your multiple needs.
- Firm, low voltage loss and little heat generation. Resistance: 500 ; Current: 20mA; Package Quantity: 100 pieces (discrepancy: 1%)
- [Note]: In order not to damage the diodes, please DO NOT use them at voltage over 12V. The diode would dim as the voltage reduces, but we do not recommend voltage lower than 9V.
- Application: Used most commonly for DIY lighting projects, science circuit experiments, signal indicators, etc.
- See more on Amazon...
Brand: DiCUNO | Manufacturer: DiCUNO
Weight: 0.26 Pounds
See On Amazon #12
RGBZONE LED Dimmer, Frequency Adjustable, DC 5V/12V/24V 30A PWM Dimming Controller, Single Channel for 5050 3538 5630 Single Color Light Ribbon, Metal Shell LED Dimmer-No Light Flicker
Asin: B0BVR5G73J | Model: FB0648 | PartNumber: FB0648
➤No Flicker-Frequency Adjustable: Optimized And Upgraded With Variable Frequency Function Of The Dimmer, By Controlling The Frequency To Adjust The Light, So That It Is Soft And Stable, No Flicker, To Protect The Eyes While More Energy-Saving Power Saving Also Avoids The Camera Imaging Time Light Strips Constantly Flickering Phenomenon..
➤Metal Shell-Knob Dimming: The High Quality, Sturdy Metal Shell Provides Excellent Anti-Corrosion And Heat-Dissipation Capacity. With A Knob Controller, It's Operated By Manual. It Also Has An Auto Memory Function, Memory Function Records Brightness After Turning The Power Off. The Screw-In Input And Output Terminals, Pre-Drilled Mounting Holes Make The Installation Literally A Breeze..
➤Single Color/Channel Dimmer-High Power：Compatible With 5V 150W, 12V 360W, 24V 720W Single Channel Led Light Application, Single Channel Dimming Controller. Suitable For Single Color Led Strips, Cob Led Light Strips , Led Modules, Boat, Camper Van, Kitchen (Under Cabinet), Truck, Marine, Rv, Deck Lights, Garden Lights..
➤Pwm Digital Dimmer：When Pwm Digital Is Dimming, It Can Avoid Rush Current, Protecting Your Led Light Being Damaged. 0%-100% Stepless Dimming, Easy Adjustment Of Brightness Through Turn The Knob Control To Meet Different Preferences And Needs..
Features
- DC 5V/12V/24V - Low Voltage DC 5V-24V Max 30A, low voltage dimmer. ***Please check whether your power supply, this product is only suitable for DC power supply, not for AC power supply.
- PWM Digital Dimmer When PWM digital is dimming, it can avoid rush current, protecting your led light being damaged. 0%-100% stepless dimming, easy adjustment of brightness through turn the knob control to meet different preferences and needs.
- No Flicker-Frequency Adjustable: Optimized and upgraded with variable frequency function of the dimmer, by controlling the frequency to adjust the light, so that it is soft and stable, no flicker, to protect the eyes while more energy-saving power saving also avoids the camera imaging time light strips constantly flickering phenomenon.
- Single Color/Channel Dimmer-High Power Compatible with 5V 150W, 12V 360W, 24V 720W single channel LED light application, single channel dimming controller. Suitable for single color LED strips, COB LED light strips , LED modules, boat, camper van, kitchen (under Cabinet), truck, marine, RV, deck lights, garden lights.
- Metal Shell-Knob Dimming: The high quality, sturdy metal shell provides excellent anti-corrosion and heat-dissipation capacity. With a knob controller, it's operated by manual. It also has an auto memory function, memory function records brightness after turning the power off. The screw-in input and output terminals, pre-drilled mounting holes make the installation literally a breeze.
- See more on Amazon...
Brand: RGBZONE | Manufacturer: RGBZONE
Dimensions: 1.18 x 3.46 x 2.05 inches | Weight: 0.12 pounds
See On Amazon #13
HiLetgo 2pcs LED Dimmer Switch DC 12V-24V 30A 360W LED DimmerAdjustable Voltage Regulator LED Brightness Controller for 5050 LED Strip Light Lamp LED Dimming
Asin: B0CDWXBGP7
Widely Used On Dc12v-24 Led Lighting Devices, Output Max 30A, Single Channel Dimming Controller For Single Color Led Strip Lights, Such As Led Strip Light, Aquarium Lighting Etc..
Save Energy By Reducing The Light Level In Your Indoor Or Outdoor Lights With It, No Flicker At Low Brightness, Very Smoothly..
Knob-Operated Control, Just Rotate The Knob To Adjust The Brightness Or Simply Turn On/Off The Lights.
Features
- High quality DC 12V-24V 30A 360W LED Dimmer
- Knob-operated control, just rotate the knob to adjust the brightness or simply turn on/off the lights
- Widely used on DC12V-24 LED lighting devices, output max 30A, single channel dimming controller for single color LED strip lights, such as LED strip light, aquarium lighting etc.
- Save energy by reducing the light level in your indoor or outdoor lights with it, no flicker at low brightness, very smoothly.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #14
LED Light Strip Dimmer, DC 12V-24V 30A PWM Dimming Controller for Dimmer Knob Adjust Brightness ON/Off Switch with Aluminum Housing, Single Channel for 5050 3538 5630 Single Color Light Ribbon
Asin: B0892NKZCP | Model: PWM Dimming Controller | PartNumber: PWM Dimming Controller | Ean: 0718893089780 | UPC: 718893089780
☞【Long Lasting】High Quality Aluminum Housing Provides Excellent Anti-Corrosion And Heat-Dissipation Capacity And Ensures A Long-Lasting Performance Even In Harsh Environments.
☞【Esay Installation】The Screw-In Input And Output Terminals, Pre-Drilled Mounting Holes Make The Installation Literally A Breeze.
☞【Protection For Led】Pwm Digital Dimming Avoids Rush Current And Protects Your Led Lights.
☞【Full Range Dimming Capability】0%-100 Fully Dimmable, Easily Adjustable Brightness To Suit Different Needs And Preferences With The Rotatable Knob.
Features
- Flexible Usage Compatible with DC 12V-24V MAX 30A LED light application, single channel dimming controller for single color LED strip lights
- Full range dimming capability 0%-100 fully dimmable, easily adjustable brightness to suit different needs and preferences with the rotatable knob
- Long Lasting High quality aluminum housing provides excellent anti-corrosion and heat-dissipation capacity and ensures a long-lasting performance even in harsh environments
- Protection For LED PWM digital dimming avoids rush current and protects your LED lights
- Esay Installation The screw-in input and output terminals, pre-drilled mounting holes make the installation literally a breeze
- See more on Amazon...
Brand: Puly | Manufacturer: PULY
See On Amazon #15
SPIGHTDEX LED Strip Light Dimmer DC 5V-24V 10A PWM Wireless RF Remote Control Full Protection for Wrong Wiring Output Short Circuit Overload Overheat for Single Color LED Strip Tape 2835 3528
Asin: B079MGT1RJ | Model: SP-N12-11A | PartNumber: SP-N12-11A | Ean: 0667322258818 | UPC: 667322258818
Note 3:The Driver Be Connected To The Input Positive And Negative Poles Of Dimmer. Then Output Of Dimmer Be Connected To Led Strip. Positive And Negative Poles Be Corresponding. If The Power Is Connected To The Output End Of The Dimmer And The Light Is Connected To The Input End Of The Dimmer, The Strip Will Always Be On But Not Under Control. Press The Remote, The Receiver Indicator Will Flash Indicate To That The Command Of The Remote Control Has Been Accepted, But The Light Is Out Of Control..
Note 5:The Sp-N12 Led Dimmer Is A Constant Voltage Controller And Can Only Be Connected To A Constant Voltage Lamp. It Is Not Suitable For Constant Current Lamps. The Controller Indicator Light Appears Red, Indicating A Short Circuit. The Controller Indicator Light Appears Yellow, Indicating Overload.So Please Check Clear With Your Lighting Before You Purchase Our Led Dimmer. Please Contact Us If You Have Any Questions For It. We Will Get Back To You Asap In 12 Hours..
Note 4：The Factory State Of The Controller Remote Control Is 1-To-1 Pairing. If The Remote Control Is Out Of Order, There Will Be A Mismatch Between The Remote Control And The Controller, So It Needs To Be Repaired. Refer To The Instructions For Matching.
Note 2:The Voltage Of The Power Supply Should Correspond To The Voltage Of The Led Strip Light. For Example, If The Lamp Belt Is Dc12v, The Dc Power Supply Of Dc12v Should Be Connected. If A 24V Lamp Is Connected To A 12V Power Supply, It Will Not Light Up..
Features
- Note 1:When the controller is normally powered on, the indicator light of the controller(receiver) will be green. If the indicator light is not on, it will prove that the controller is not installed correctly and is not normally powered on. Check whether the input and output are connected backwards, whether the screw is tightened and the line is in normal contact, and whether the line corresponds to the positive and negative poles of the controller.
- Note 2:The voltage of the power supply should correspond to the voltage of the led strip light. For example, if the lamp belt is DC12V, the dc power supply of DC12V should be connected. If a 24V lamp is connected to a 12V power supply, it will not light up.
- Note 3:The Driver be connected to the input positive and negative poles of Dimmer. Then output of Dimmer be connected to led strip. Positive and negative poles be corresponding. If the power is connected to the output end of the dimmer and the light is connected to the input end of the dimmer, the strip will always be on but not under control. Press the remote, the receiver indicator will flash indicate to that the command of the remote control has been accepted, but the light is out of control.
- Note 4 The factory state of the controller remote control is 1-to-1 pairing. If the remote control is out of order, there will be a mismatch between the remote control and the controller, so it needs to be repaired. Refer to the instructions for matching
- Note 5:The SP-N12 LED DIMMER is a constant voltage controller and can only be connected to a constant voltage lamp. It is not suitable for constant current lamps. The controller indicator light appears red, indicating a short circuit. The controller indicator light appears yellow, indicating overload.So Please check clear with your lighting before you purchase our LED Dimmer. Please contact us if you have any questions for it. we will get back to you asap in 12 hours.
- See more on Amazon...
Brand: SPIGHTDEX | Manufacturer: SPIGHTDEX
Dimensions: 0.60 x 3.42 x 0.95 inches
See On Amazon #16
[2 Pack] KEYGMA DC 0/1-10V Knob LED Dimmer (No Flickering or Humming), Low Voltage Passive Dimmer PWM Dimming for 0-10V or 1-10V Dimmable Electronic LED Driver
Asin: B09ZV213C4 | Model: HAK-DC010V | PartNumber: HAK-DC010V | Ean: 0771077292406 | UPC: 771077292406
Dimmer Adjustment Range: 5-100%, Stepless Dimming And No Flickering Or Humming..
Easy To Install. Brown Line Is "Dim +",Blue Line Is "Dim -". Please Note: Do Not Connect It With Ac Power Directly..
Small Size: 0.9*1.3*1.3 Inch (Including Knob Height); Wire Length: 13 Inch..
The Low Voltage Electronic Pwm 0-10V Dimmer Is For The Led Lights That Have A Separate Dimmer Circuit. It's Specifically Made To Drive A Pwm Circuit Built Into The Light..
Features
- This 2 pack 0-10v dimmer knob for led lights is ONLY need to be connected the 0-10V / 1-10V Dimmable LED Driver. And it can be compatible with most of the LED drivers.
- The low voltage electronic pwm 0-10v dimmer is for the LED lights that have a separate dimmer circuit. It's specifically made to drive a PWM circuit built into the light.
- Dimmer adjustment range: 5-100%, stepless dimming and no flickering or humming.
- Small size: 0.9*1.3*1.3 inch (including knob height); Wire length: 13 inch.
- Easy to install. Brown line is DIM +,Blue line is DIM -. PLEASE NOTE: DO NOT connect it with AC power directly.
- See more on Amazon...
Brand: KEYGMA | Manufacturer: KEYGMA
Dimensions: 15.60 x 1.30 x 0.90 inches | Weight: 0.13 Pounds
See On Amazon #17
0-10V LED Dimmer Switch, Low Voltage Dimmer Switch for Dimmable LED Lights, CFL, Halogen and Incandescent Bulbs, Single-Pole or 3-Way, Wallplate Included, ETL Listed
Asin: B0C99SH8TJ | Model: 0-10V | PartNumber: 0-10V
Solide Rocker: This 0-10V Dimmer Switch For Led Lights Has An Adjustable Slide Lever On The Right Side To Brighten/Dim The Light To Suit Different Needs..
Etl Certified: This Dimmer Switch With Etl Safe Certified,If Any Questions,You Can Feel Free To Contact Us..
Wide Compatibility: This 0-10V Dimmer Switch Is Suitable For Up To 600W Incandescent Lamps And 150W Leds,Such As 150W Led High Bay Light..
3-Way Dimming: Support 3-Way Dimming, You Can Connect A 3-Way Dimmer Switch To Support Only Led/Cfl And Incandescent Lamps With 0-10V Driver.Ac 110V~277V 50~60Hz Input..
Features
- Smooth Dimming: This 0-10v dimmer switch can achieve 5%-100% full range of smooth dimming,5% is the darkest, but the light will not go out completely, 100% is the brightest.
- 3-way Dimming: Support 3-way dimming, you can connect a 3-way dimmer switch to support only LED/CFL and incandescent lamps with 0-10V driver.AC 110V~277V 50~60Hz input.
- Solide Rocker: This 0-10V dimmer switch for LED lights has an adjustable slide lever on the right side to brighten/dim the light to suit different needs.
- Wide Compatibility: This 0-10v dimmer switch is suitable for up to 600W incandescent lamps and 150W LEDs,such as 150W LED high bay light.
- ETL Certified: This dimmer switch with ETL safe certified,If any questions,you can feel free to contact us.
- See more on Amazon...
Brand: Krsizhao | Manufacturer: Krsizhao
Dimensions: 1.14 x 4.56 x 1.75 inches
See On Amazon #18
3 pcs Genuine PWM Ac Programmable Light Dimmer 110V - 220V AC Module Controller Compatible 50/60hz 3.3V/5V Logic Compatible with Arduino, STM, ARM, Raspberry
Asin: B0893K6ZPK | Model: 1ChDimmerHeat2pcs | PartNumber: 1ChDimmerHeat2pcs | Ean: 7426959016078
Compatible With Any Arduino, Raspberry Boards. Arduino, Stm, Arm, Avr, Raspberry.
3Pcs In A Bag. The Zero Crossing Is Directly Derived From The Rectified Mains Ac Lines..
Ac Phase Control Circuit (Dimming Circuit) / Home Automation, School Projects, Work Related Projects.
Sample: Please See Images. Can Control Ac/Dc Motor, Electric Pump, Tools.
Features
- AC Light Dimmer Module Controller Board ARDUINO RASPBERRY Compatible 50/60Hz 3.3V/5V logic 220V/110V
- SAMPLE: please see images. Can control AC/DC motor, electric pump, tools
- Compatible with any ARDUINO, RASPBERRY boards. Arduino, STM, ARM, AVR, Raspberry
- AC Phase Control Circuit (Dimming Circuit) / Home Automation, School Projects, Work Related Projects
- 3pcs in a bag. The zero crossing is directly derived from the rectified mains AC lines.
- See more on Amazon...
Brand: IOT DynRobot | Manufacturer: ElectronicNuts
Dimensions: 1.18 x 2.48 x 1.18 inches
See On Amazon #19
LPD LED Dimmer, DC Jack 12-24V, 6A Max, Strip Light Mini Dial Inline Switch Dimmer,SMD 5050 3528 2835 5630 LED Strip LED Tape LED Ribbon LED Rope LED String Light
Asin: B071NRKNJH | Model: T2-B | PartNumber: T2-B | Ean: 7907613217067
Max Output 6 Amps Or 72 Watts At 12V Dc.
Pwm Digital Dimming - 0% - 100% Dimming, No Flicker, No Current Surges..
Energy Efficient, Reliable, 1-Year Warranty.
Easy To Operate - Knob-Operated Control. Just Rotate The Knob To Adjust The Brightness..
Features
- Functions - To djust the brightness of SMD 5050/3528/2835/5630 LED strips, as well as other DC 12V LED devices.
- Easy to Operate - Knob-operated control. Just rotate the knob to adjust the brightness.
- MAX OUTPUT 6 AMPS or 72 Watts at 12V DC
- Energy efficient, reliable, 1-year warranty
- PWM Digital Dimming - 0% - 100% dimming, no flicker, no current surges.
- See more on Amazon...
Brand: LaiPuDuo | Manufacturer: Shenzhen LPD Co.,Ltd
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.07 Pounds
See On Amazon #20
ZOOKOTO 12V/24V DC 30A LED PWM Dimmer Controller Dimming Controller for Single Color LED Strip Lights Single Channel 5050 3538 5630 Single Color Light Ribbon
Asin: B07F7YZSL6 | Model: intelligent | PartNumber: intelligent
0 ~ 100% Brightness Adjustable,By Controlling The Voltage And Current Output To Change The Brightness Of The Lamp Screen.
Easy Install With The Screw-In Input And Output Terminals, Pre-Drilled Mounting Holes Provides For Fixed Lighting Projects.
Pwm Digital Dimming, Avoid Rush Current, Protect Your Led Lights Mainly Use To Adjust Single Color Led Light Lamps And Led Strip.
Max.Current Rated At 30A, That Is 360W@12V And 720W@24V.
Features
- Compatible with DC 12V and 24V LED light application, single channel dimming controller for single color led lights / lights monochrome 5050 3528 strips. Not suitable for multi-color mix Bonded LED lamps
- Max.Current rated at 30A, that is 360W@12V and 720W@24V
- 0 ~ 100% brightness adjustable,by controlling the voltage and current output to change the brightness of the lamp screen
- PWM digital dimming, avoid rush current, protect your LED lights Mainly use to adjust single color LED light lamps and Led Strip
- Easy install with the screw-in input and output terminals, pre-drilled mounting holes provides for fixed lighting projects
- See more on Amazon...
Brand: ZOOKOTO | Manufacturer: ZOOKOTO
Dimensions: 0.87 x 2.60 x 2.40 inches | Weight: 0.18 Pounds
See On Amazon
Looking For Something Else?
Search