Spark Plug Wire Heat Shield Spark Plug Wire Heat Sleeve Spark Plug Wire Protection 2500 Degree High Temp Heat Tape Protect 8-Pack(Blue)
Asin: B0C3CH4Y4F | Model: Blue W1.2*8 | PartNumber: Blue W1.2*8 | Ean: 0726634158534 | UPC: 726634158534
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Materials】 ：Spark Plug Wire Heat Sleeve Is Made With Fiberglass Material. The Thick Material Is Long Enough To Protect Spark Plug Wires As It Nears The Header Or Exhaust Manifold Helping To Increase Longevity Of Wire And Maintain Maximize Spark For As Long As You Keep Your Vehicle.It Can Withstand Heat Up To 2500 Degrees Intermittent..
【100% Guarantee】：We Will Refund You Immediately If You Don't Satisfied With The Item You Received. You Will Enjoy 12 Months Long Service. Any Problem Please Feel Free To Contact Us!.
【Easy Installation】：Spark Plug Wire Heat Sleeve The Covers Are Easy To Slip In The Boot Heat Protector On To Each Boot Of The Spark Plug Wire. Just Slip The Large End (With The Sewn Stitching) Over The Boot. Then Carefully Slip The Ringed End Over The Boot That Connects ..
【Perfect Use】：Spark Plug Wire Heat Shield It Also Works Well With 90 Degrees, 45 Degrees, And Straight Spark Plug . Fits Most Hot Rods And Classics Engine. Also Fit For Most Angled & Straight Boots. Length Is About 6.1 Inch Long..
Features
- Protection Wire Spark Plug Wire Heat Shield Widely used as a solution to your burning spark plug wires which create a lot of heat. These universal spark plug wire cover can provide a good heat protection to spark plug wires especially on engines with excessive exhaust headers.
- Perfect Use Spark Plug Wire Heat Shield It also works well with 90 degrees, 45 degrees, and straight spark plug . Fits most hot rods and classics engine. Also fit for most angled & straight boots. Length is about 6.1 inch long.
- Materials Spark Plug Wire Heat Sleeve is made with fiberglass material. The thick material is long enough to protect spark plug wires as it nears the header or exhaust manifold helping to increase longevity of wire and maintain maximize spark for as long as you keep your vehicle.It can withstand heat up to 2500 degrees intermittent.
- Easy Installation Spark Plug Wire Heat Sleeve The covers are easy to slip in the boot heat protector on to each boot of the spark plug wire. Just slip the large end (with the sewn stitching) over the boot. Then carefully slip the ringed end over the boot that connects .
- 100% Guarantee We will refund you immediately if you don't satisfied with the item you received. You will enjoy 12 months long service. Any problem please feel free to contact us!
- See more on Amazon...
Brand: XINPENGLIU | Manufacturer: XINPENGLIU
See On Amazon Similar To Spark Plug Wire Heat Shield
#1
SHINEHOME Spark Plug Wire Heat Shield Sleeve 2500 Spark Plug Boot Protector Wire Boots Wrap for SBC BBC 350 454 8PCS Spark Plug Wire Covers
Asin: B0196D53NU | Model: A-SP-01 | PartNumber: A-SP-01 | Ean: 0705701974550 | UPC: 705701974550
【Product Highlights】Each Boot Is 6Inch Length, Id 0.86Inch, Boots Will Work With 90 Degree, 45 Degree, And Straight Spark Plug Boots.
【Package】8 Black Spark Plug Wire Boot Sleeves(Note: Only Fit For Vehicles Which Burning Petrol), You Will Enjoy 12 Months Once You Order From Us, Any Question You Can Contact With Us Via Email. ***Please Note*** Only One Shinehome Supplier In Amazon. Purchasing From Elsewhere Will Not Offer You Warranty..
【Easy Installation】Just Slip On (Sewn End Over Spark Plug ) For Maximum Protection ,Sleeves Can Withstand Heat Up To 1200 Degrees Using Patented Insultherm Technology.
【Compatibility】Fits All Spark Plug Boots And Spark Plug Boot Heat Socks Can Withstand Heat Rated For 1200°F-1800°F Continuous Use, 2500°F Intermittent..
Features
- Affordable Reliable and Built to Last SHINEHOME aims to offer brand new and high quality Replacement Set of 8 Black Spark Plug Wire Boot Sleeves for SBC BBC 350 454 ,Made From Double Wall Braided Fiberglass Sleeving (Triple Wall At Sewn End), you will find it is affordable reliable and built to Last, at least you can use for a long time.
- Compatibility Fits All Spark Plug Boots And Spark plug boot heat socks Can Withstand Heat rated for 1200 F-1800 F continuous use, 2500 F intermittent.
- Product Highlights Each Boot Is 6inch Length, ID 0.86inch, Boots Will Work With 90 Degree, 45 Degree, And Straight Spark Plug Boots
- Easy Installation Just Slip On (Sewn End Over Spark Plug ) For Maximum Protection ,Sleeves Can Withstand Heat Up To 1200 Degrees Using Patented Insultherm Technology
- Package 8 Black Spark Plug Wire Boot Sleeves(Note: only fit for vehicles which burning petrol), You Will Enjoy 12 months Once You Order From Us, Any Question You Can Contact With Us Via Email. ***PLEASE NOTE*** Only One SHINEHOME Supplier in Amazon. Purchasing from elsewhere will not offer you warranty.
- See more on Amazon...
Brand: SHINEHOME | Manufacturer: SHINEHOME
Dimensions: 7.20 x 7.30 x 7.30 inches | Weight: 0.00 pounds
See On Amazon #2
JDMSPEED High Performance Spark Plug Ignition Wire For 2000-2009 CHEVY GMC V8
Asin: B076G82DX3 | Model: D071 | PartNumber: D071 | Ean: 0714131641352 | UPC: 714131641352
One Year Warranty.
Ultra High Strength/High Temp. Silicone Boots And Sleeve.
Ultralow Resistance Kevlar Core.
10.2Mm Spiral Wound Design.
Features
- 100% New Construction
- 10.2mm Spiral Wound Design
- One Year Warranty
- UltraLow Resistance KEVLAR Core
- Ultra High Strength/High Temp. Silicone Boots and Sleeve
- See more on Amazon...
Brand: JDMSPEED | Manufacturer: D071
Weight: 1.74 pounds
See On Amazon #3
LEDAUT 2" x 50' Titanium Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties
Asin: B011B99B0I | Model: HMHRT25017 | PartNumber: HMHRT25017 | Ean: 0603629368393 | UPC: 603629368393
High Resistance To Abrasions, Oil Spills, Temperatures And Vibration Breakdown..
The Thermal Heat Wrap Reduces Heat Under Hood Up To 50% And Improving Car And Motorcycle Performance.
The Exhaust Heat Wrap Tape Can Withstand 1400F Direct/2000F Radiant Heat..
Titanium Heat Shield Sleevevis Made From Crushed Volcanic Rock..
Features
- 2"X50' Titanium Wrap with (pack of 16) Stainless Steel(304) Locking Ties.
- Titanium heat shield sleevevis made from crushed volcanic rock.
- High resistance to abrasions, oil spills, temperatures and vibration breakdown.
- The exhaust heat wrap tape can withstand 1400F direct/2000F radiant heat.
- The thermal heat wrap reduces heat under hood up to 50% and improving car And motorcycle Performance
- See more on Amazon...
Brand: LEDAUT | Manufacturer: LEDAUT
See On Amazon #4
Heat Shroud Sleeve Aluminized Sleeving Express Aluminized Hose and Silver Hose Wire Protection Barrier with Hook and Loop Closure, 3/4" I.D.x 10FT- 1" I.D.x 10FT
Asin: B08CRSJP9W | Ean: 0725786273201 | UPC: 725786273201
【Superb Craftsmanship】Titanium Wrap Is Engineered To Be Stronger Than Most Wraps And More For Improved Thermal Performance And Reliability. Aluminized Sleeving Withstands 600 Degrees F Direct, Continuous Heat And 2000 Degrees F Radiant Heat.But Please Stay Away From Open Flames..
【Tips】Please Check The Size Of The Products Pictures,Type And Shape To Make Sure The Aluminized Sleeve Is The One That You Need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service !.
【Widely Applications】Our Heat Shroud Aluminized Sleeving Extremely Pliable For A Tight And Secure Wrap For Expand And Contract Over Fittings,Cable,Terminals And More.High Resistance To Abrasions, Oil Spills, Temperatures And Vibration Breakdown..
【Easy Installation】Pliable For Tight Bends,You Can Trim To Desired Length,Very Easy To Intall And Use It..
Features
- HIGH PERFORMANCE FEATURE Size:Width is 3.8 inch(95mm) Length is 118Inch/10FT(3M).Added convenience of a hook & loop closure design along the open edges.Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud sleeves around whatever needs protection and close the edges.
- EASY INSTALLATION Pliable for tight bends,you can trim to desired length,very easy to intall and use it.
- SUPERB CRAFTSMANSHIP Titanium wrap is engineered to be stronger than most wraps and more for improved thermal performance and reliability. Aluminized Sleeving withstands 600 degrees F direct, continuous heat and 2000 degrees F radiant heat.But please stay away from open flames.
- WIDELY APPLICATIONS Our Heat Shroud Aluminized Sleeving Extremely pliable for a tight and secure wrap for expand and contract over fittings,cable,terminals and more.High resistance to abrasions, oil spills, temperatures and vibration breakdown.
- TIPS Please check the size of the products pictures,type and shape to make sure the aluminized sleeve is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service !
- See more on Amazon...
Brand: LEDAUT | Manufacturer: LEDAUT
Dimensions: 0.04 x 120.00 x 4.10 inches | Weight: 0.42 pounds
See On Amazon #5
JDMSPEED New Heat Spark Plug Ignition Wires Set 10.5mm Replacement for LSx LS1 LS2 LS3 LS6 LS7
Asin: B06XC1Z6VF | Model: JDM-D028 | PartNumber: JDM-D028 | Ean: 0713803813967 | UPC: 713803813967
Ultra High Strength/High Temp. Silicone Boots And Sleeve.
Please Make Sure To Check Fitment Below!!.
Ready For Install Straight Out Of The Box.
10.5Mm Spiral Wound Design.
Features
- AFTER MARKET HIGH PREMIUM QUALITY
- 10.5mm Spiral Wound Design
- Ultra High Strength/High Temp. Silicone Boots and Sleeve
- Ready for Install Straight out of the box
- Please make sure to check fitment below!!
- See more on Amazon...
Brand: JDMSPEED | Manufacturer: JDMSPEED
Dimensions: 7.87 x 10.63 x 2.76 inches | Weight: 1.37 Pounds
See On Amazon #6
Titanium Spark Plug Wire Boots Thermal Protection Insulator Sleeve, 2500 Degree Heat shield Cover Wrap 6 inch for Car Truck 8PCS
Asin: B09VTJ5RQ2 | Model: Ti01 | PartNumber: Ti01 | Ean: 0746787909760 | UPC: 746787909760
🏎️【Compatibility 】Length 6.1"(15.5Cm), Id 1.4"(35Mm), It Will Work With 90 Degrees, 45 Degrees, And Straight Spark Plug Boot Heat Socks..
🏎️【Package Included】8 Pieces. Wear Gloves And Long-Sleeved Clothing Before Installation To Prevent Stone Fibers From Falling On Your Body..
🏎️【Professional Installation 】No Instruction Included. Just Slip The Large End (With The Sewn Stitching) Over The Boot. Then Carefully Slip The Ringed End Over The Boot That Connects To The Spark Plug. The Other End Is Covered With A Metal Circle For Easy Installation..
🏎️【Durable Material】The Spark Plug Wire Boots Are Made Of Two Layers Of Basalt Material. It Has Good High Temperature Resistance And Anti-Corrosion Effect, And The Thermal Insulation Temperature Can Reach 2500 Degrees..
Features
- Description Protection DEGEOBERLIN Spark Plug Wire Heat shield helps prevent burn-through, hardening and cracking of boots. Enhance the performance of the engine, extends lifetime of the wire & plugs. Spark plug heat protector Header heat wrap both for boot and wire, can protect your expensive plug wire set's performance and increases their life using for LS1 / LS2 SBC BBC 350 454.
- Durable Material The spark plug wire boots are made of two layers of basalt material. It has good high temperature resistance and anti-corrosion effect, and the thermal insulation temperature can reach 2500 degrees.
- Compatibility Length 6.1(15.5cm), ID 1.4(35mm), it will work with 90 degrees, 45 degrees, and straight spark plug boot heat socks.
- Professional installation No instruction included. Just slip the large end (with the sewn stitching) over the boot. Then carefully slip the ringed end over the boot that connects to the spark plug. The other end is covered with a metal circle for easy installation.
- Package Included 8 pieces. Wear gloves and long-sleeved clothing before installation to prevent stone fibers from falling on your body.
- See more on Amazon...
Brand: DEGEOBERLIN | Manufacturer: DEGEOBERLIN
Dimensions: 0.20 x 4.70 x 0.50 inches
See On Amazon #7
ACDelco Professional 9748HH Spark Plug Wire Set
Asin: B000S2QVYE | Model: 9748HH | PartNumber: 9748HH | Ean: 0707773322116 | UPC: 707773322116
Terminal Design Improves Spark Plug Retention And Assists Installation With Excellent Corrosion Resistance.
Insulator Employs High Dielectric Materials.
Spark Plug Distributor Boot Shape And Materials Provide Proper Fit, Installation, And Water-Tight Seal.
Features
- Wire conductor, wire length, and diameter help provide maximum spark delivery and protection
- Spark plug distributor boot shape and materials provide proper fit, installation, and water-tight seal
- Terminal design improves spark plug retention and assists installation with excellent corrosion resistance
- Insulator employs high dielectric materials
- See more on Amazon...
Brand: ACDelco | Manufacturer: ACDelco
Dimensions: 6.00 x 3.80 x 10.00 inches | Weight: 1.12 pounds
Warranty: Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details.
See On Amazon #8
SunplusTrade 2" x 50' Black Exhaust Header Heat Wrap for Motorcycle Cars Heat Shield with Stainless Steel Zip Tie (2 Pack)
Asin: B0B75Q4M51 | Model: SPT017 | PartNumber: SPT017
High Resistance To Abrasions, Oil Spills, Temperatures And Vibration Breakdown..
Universal Fitment For Cars And Motorcycles Performance Parts - Can Be Applied To Motorcycle Exhaust, Headers, Car Exhausts, And Any Hot Metal Surfaces..
The Thermal Heat Wrap Can Reduce Heat Under Hood Up To 50%..
The Exhaust Heat Wrap Can Withstand 1400F Direct/2000F Radiant Heat..
Features
- Package includes 2 packs of 2 inch X 50 feet Heat Wrap with (pack of 12) 12" Stainless Steel Locking Zip Ties.
- The exhaust heat wrap can withstand 1400F direct/2000F radiant heat.
- High resistance to abrasions, oil spills, temperatures and vibration breakdown.
- The thermal heat wrap can reduce heat under hood up to 50%.
- Universal fitment for cars and motorcycles performance parts - Can be applied to motorcycle exhaust, headers, car exhausts, and any hot metal surfaces.
- See more on Amazon...
Brand: SunplusTrade | Manufacturer: SunplusTrade
Warranty: 1 year
See On Amazon #9
ACDelco Professional 9748RR Spark Plug Wire Set
Asin: B00FG2MZXM | Model: 9748RR | PartNumber: 9748RR | Ean: 0808709034902, 6918545496773 | UPC: 808709034902
Terminal Design Improves Spark Plug Retention And Assists Installation With Excellent Corrosion Resistance.
Insulator Employs High Dielectric Materials.
Spark Plug Distributor Boot Shape And Materials Provide Proper Fit, Installation, And Water Tight Seal. Boot Type: Solid.
Features
- Wire conductor, wire length, and diameter help provide maximum spark delivery and protection
- Spark plug distributor boot shape and materials provide proper fit, installation, and water tight seal. Boot Type: Solid
- Terminal design improves spark plug retention and assists installation with excellent corrosion resistance
- Insulator employs high dielectric materials
- See more on Amazon...
Brand: ACDelco | Manufacturer: ACDelco
Dimensions: 6.00 x 3.80 x 10.00 inches | Weight: 1.25 pounds
Warranty: Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details.
See On Amazon #10
Spark Plug Wire Heat Shield Spark Plug Wire Heat Sleeve Spark Plug Heat Covers 2500 Degree High Temp Heat Tape Protection 8-Pack (Titanium)
Asin: B092PY1DZQ | Model: Spark Plug Wire Heat Shield | PartNumber: Spark Plug Wire Heat Shield | Ean: 0711102583505 | UPC: 711102583505
【 Materials】 ：Spark Plug Wire Heat Shield Made With Two Layers Of High Temperature Titanium Material. The Thick Material Is Long Enough To Protect Spark Plug Wires As It Nears The Header Or Exhaust Manifold Helping To Increase Longevity Of Wire And Maintain Maximize Spark For As Long As You Keep Your Vehicle.It Can Withstand Heat Up To 2500 Degrees Intermittent..
【100% Guarantee】：We Will Refund You Immediately If You Don't Satisfied With The Item You Received. You Will Enjoy 12 Months Long Service. Any Problem Please Feel Free To Contact Us!.
【Easy Installation】：Spark Plug Wire Heat Sleeve Easy To Slip In The Boot Heat Protector On To Each Boot Of The Spark Plug Wire. Just Slip The Large End (With The Sewn Stitching) Over The Boot. Then Carefully Slip The Ringed End Over The Boot That Connects To The Spark Plug..
【Perfect Use】：Spark Plug Wire Heat Sleeve Works Well With 90 Degrees, 45 Degrees, And Straight Spark Plug . Fits Most Hot Rods And Classics Engine. Also Fit For Most Angled & Straight Boots. Length Is About 6.1 Inch Long..
Features
- Protection Wire Spark Plug Wire Heat Shield Widely used as a solution to your burning spark plug wires which create a lot of heat. These universal spark plug wire cover can provide a good heat protection to spark plug wires especially on engines with excessive exhaust headers.
- Perfect Use Spark Plug Wire Heat Sleeve Works well with 90 degrees, 45 degrees, and straight spark plug . Fits most hot rods and classics engine. Also fit for most angled & straight boots. Length is about 6.1 inch long.
- Materials Spark Plug Wire Heat Shield Made with two layers of high temperature titanium material. The thick material is long enough to protect spark plug wires as it nears the header or exhaust manifold helping to increase longevity of wire and maintain maximize spark for as long as you keep your vehicle.It can withstand heat up to 2500 degrees intermittent.
- Easy Installation Spark Plug Wire Heat Sleeve Easy to slip in the boot heat protector on to each boot of the spark plug wire. Just slip the large end (with the sewn stitching) over the boot. Then carefully slip the ringed end over the boot that connects to the spark plug.
- 100% Guarantee We will refund you immediately if you don't satisfied with the item you received. You will enjoy 12 months long service. Any problem please feel free to contact us!
- See more on Amazon...
Brand: XINPENGLIU | Manufacturer: yiqihvbjjjvt
Dimensions: 1.00 x 6.00 x 1.00 inches
See On Amazon #11
8 ACD-OEM Spark Plug Wires 9748HH + 8 ACD-OEM Double Platinum Spark Plugs 41-962 + 8 Heat Shields For LS2 LS3 LS4 LS7 Engines
Asin: B07YN7X1Z3 | Ean: 0810034551085 | UPC: 810034551085
Spark Plug Distributor Boot Shape And Materials Provide Proper Fit, Installation, And Water-Tight Seal.
Pure Copper Core Results In Cooler Electrode Temperature For Maximized Durability And Fouling Resistance.
The Same Performance As Your Gm Vehicle's Original Factory Component.
Features
- Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
- The same performance as your GM vehicle's original factory component
- Spark plug distributor boot shape and materials provide proper fit, installation, and water-tight seal
- Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
- See more on Amazon...
Brand: AD Auto Parts | Manufacturer: AD Auto Parts
Weight: 0.00 Pounds
Warranty: 180 Days
See On Amazon #12
Augeny 4 PCS USB LED Car Interior Atmosphere Lamp, Plug-in USB Decor Night Light, Portable Auto Ambient Lighting Kit, Universal Vehicle Interior Accessories for Most Cars (Blue & Ice Blue)
Asin: B0CMWHX9Y6 | Model: USB LED Car Interior Atmosphere Lamp | PartNumber: USB LED Car Interior Atmosphere Lamp
【Stylish & Functional】: Led Ambient Lights In Multiple Colors Add Style And Personality To Both The Exterior And Interior Of Your Car. It Also Provides You With A Comfortable And Relaxing Atmosphere While Driving. This Led Ambient Light Will Automatically Turn On After You Plug It Into The Usb Port, So You Don't Have To Worry About It Going Out After A While. Note: When You Don't Need To Use It Or Want To Turn Off The Light, Just Unplug The Product..
【Wide Application】: Led Touch Lights Can Be Installed In Dark Places Such As Storage Boxes,Armrest Boxes,Car Doors,Seat Corners,Etc. With The Soft And Non-Glaring Lights, Any Dark Place Can Be Illuminated By It. As Long As Your Car Has Electricity, Just Plug Them Into Your Car's Usb Port And You Can Use It With Confidence. It Is Also Suitable For All Cars, Computers, Laptops, Power Banks, Etc. With Usb Ports..
【Durable & Environmentally Friendly】: Engery Saving, Environmental Friendly, Saving Space, Used For Usb Port Dustproof, Lighting But Not Dazzling And Eye Protection Make It Duriable. With The High Quality Led Chip, The Usb-Led Car Interior Atmosphere Light Has A Very Low Power Consumption. So It Will Not Add Burden To Your Car Battery And You Can Trust That Buying It Is The Right Thing To Do..
【Easy To Install】: One-Step Installation, No Need To Install Batteries. Just Plug The Usb Interface Of The Led Ambient Light Directly Into The Usb Socket In The Car. It Will Stay On As Long As It Is Plugged In And Will Not Go Off Because The Battery Is Dead. And There Will Be No Situation Like Voice-Activated Lights That Need To Make A Sound After A While To Keep On..
Features
- Package & Color : Each package contains 4 or 7 LED car atmosphere lights. There are many colors and types of combination for you to choose. Whether you want warm or cold light, you can always find your favorite style. But please note that our lamp has no color transformation function, you get the combination of different single color lights.
- Easy to Install : One-step installation, no need to install batteries. Just plug the USB interface of the LED ambient light directly into the USB socket in the car. It will stay on as long as it is plugged in and will not go off because the battery is dead. And there will be no situation like voice-activated lights that need to make a sound after a while to keep on.
- Stylish & Functional : LED ambient lights in multiple colors add style and personality to both the exterior and interior of your car. It also provides you with a comfortable and relaxing atmosphere while driving. This LED ambient light will automatically turn on after you plug it into the USB port, so you don't have to worry about it going out after a while. Note: When you don't need to use it or want to turn off the light, just unplug the product.
- Durable & Environmentally Friendly : Engery saving, environmental friendly, saving space, used for USB port dustproof, lighting but not dazzling and eye protection make it duriable. With the high quality LED chip, the USB-LED car interior atmosphere light has a very low power consumption. So it will not add burden to your car battery and you can trust that buying it is the right thing to do.
- Wide Application : LED touch lights can be installed in dark places such as storage boxes,armrest boxes,car doors,seat corners,etc. With the soft and non-glaring lights, any dark place can be illuminated by it. As long as your car has electricity, just plug them into your car's USB port and you can use it with confidence. It is also suitable for all cars, computers, laptops, power banks, etc. with USB ports.
- See more on Amazon...
Brand: Augeny | Manufacturer: Augeny
Warranty: 0.2
See On Amazon #13
12pc Engine Spark Plug Wire Separator Divider & 8pc Spark Plug Wire Boots Protector Heat Sheild Sleeve 8mm 9mm 10mm Spark Plug Wire Clamp Holder Aluminum Alloy Ignition Wire Divider
Asin: B0B9YK86PS | Model: 80005610 | PartNumber: 80005610 | Ean: 0708686975918 | UPC: 708686975918
Spark Plug Wire Separator: Made Of High-Quality Aluminum Alloy, Durable And Lightweight, Anti-Collision, Wear-Resistant, Can Well Protect And Fix The Spark Plug Wire And Avoid Loosening Caused By Crossing Each Other..
Easy To Install: Just Slide The Stitched End Onto The Boot For Protection. The Included Allen Key Will Help You Take The Wire Separator Divider Apart And Put It Back Together Under The Hood, Fash Installation..
Function: The Spark Plug Boot Protector Can Keep The Spark Wire And Spark Plug Cooler In A High-Temperature Environment To Avoid Causing A Fire. The Spark Wire Separator Can Make The Spark Wire And The Engine Compartment Well Organized..
Spark Plug Heat Sleeve: Made Of A Double Braided Fiberglass Sleeve, Which Has Good Flame Retardancy, Heat Insulation, And High-Temperature Resistance. Protecting The Wire From Being Damaged By Exhaust Manifolds..
Features
- Compatibility: 8 PCS spark plug wire heat shield fits most 90 degree, 45 degree and straight spark plug boots, 12 PCS Engine Spark Plug Wire Separators for 8mm 9mm 10mm spark wires.
- Spark Plug Heat Sleeve: Made of a double braided fiberglass sleeve, which has good flame retardancy, heat insulation, and high-temperature resistance. Protecting the wire from being damaged by exhaust manifolds.
- Spark Plug Wire Separator: Made of high-quality aluminum alloy, Durable and lightweight, anti-collision, wear-resistant, can well protect and fix the spark plug wire and avoid loosening caused by crossing each other.
- Function: The spark plug boot protector can keep the spark wire and spark plug cooler in a high-temperature environment to avoid causing a fire. The spark wire separator can make the spark wire and the engine compartment well organized.
- Easy To Install: Just slide the stitched end onto the boot for Protection. The included Allen key will help you take the wire separator divider apart and put it back together under the hood, fash installation.
- See more on Amazon...
Brand: SHINEHOME | Manufacturer: SHINEHOME
See On Amazon #14
JDMSPEED 8PCS Red 1200 Spark Plug Wire Boots Heat Shield Protector Sleeve Cover Replacement for SBC BBC 350 454 6 Inch
Asin: B01HMAGNLA | Model: B418-SHSP-RD | PartNumber: B418-SHSP-RD | Ean: 0713803813448 | UPC: 713803813448
Spark Plug Boot Cover Is Made From Fiberglass Material, Protect From Heat From 1000 Fahrenheit (550 Celsius); Note: Only Fit For Vehicles Which Burning Petrol.
Easy Installation; Just Slip On (Sewn End Over Spark Plug ) For Maximum Protection, Sleeves Can Withstand Heat Up To 1200 Degrees Using Patented Insultherm Technology.
Replacement For Gm, Replacement For Chevy, Replacement For Gmc, Replacement For Olds, Replacement For Cadillac, Replacement For Pontiac, Replacement For Buick, Replacement For Ford, Replacement For Mopar, Replacement For Chrysler, Replacement For Dodge, Replacement For Plymouth.
Spark Plug Wire Boot Sleeves Look Great, Helps Reduce Misfires, Resists Damaging Chemicals, Extends Life Of Wire & Boots. Non-Flammable & Protects Against Chemicals & Resists Water, Protect Spark Plug Boots And Spark Plug Wires From Excessive Engine And Exhaust Heat.
Manufacture Part Number: Sbc Bbc 350 454.
Compatible: Universal Fits Most Straight Or Angled Boots; For Most Hot Rods And Classics Engines, Such As 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 Engines.
Fits All Spark Plug Boots And Wires Up To 1200 Degrees Fahrenhett (648.89° C).
Keep Your Spark Wire And Spark Plug Cooler In A High Temperature Environment, Constructed With Double Layered, They Create An Effective Non-Flammable Thermal Barrier That Will Extend The Life Of Your Ignition Wires.
Package Include: 8X Red Boot Heat Sleeve Protector Cover, Each Boot Is 6Inch Length, Boots Will Work With 90 Degree, 45 Degree, And Straight Spark Plug Boots; Length:6"(15.5Cm) Id:1"(25Mm).
Features
- Brand new and high quality, Made From Double Wall Braided Fiberglass Sleeving (Triple Wall At Sewn End), you will find it is affordable reliable and built to Last, at least you can use for a long time
- Package Include: 8x Red Boot Heat Sleeve Protector Cover, Each Boot Is 6inch Length, Boots Will Work With 90 Degree, 45 Degree, And Straight Spark Plug Boots; Length:6(15.5cm) ID:1(25mm)
- Spark Plug Boot Cover is Made from fiberglass material, protect from Heat from 1000 Fahrenheit (550 Celsius); Note: only fit for vehicles which burning petrol
- Fits All Spark Plug Boots And Wires Up To 1200 Degrees Fahrenhett (648.89 C)
- Manufacture Part Number: SBC BBC 350 454
- Compatible: Universal fits most straight or angled boots; For most hot rods and classics engines, such as 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines
- Replacement For GM, Replacement For Chevy, Replacement For GMC, Replacement For Olds, Replacement For Cadillac, Replacement For Pontiac, Replacement For Buick, Replacement For Ford, Replacement For Mopar, Replacement For Chrysler, Replacement For Dodge, Replacement For Plymouth
- Spark Plug Wire Boot Sleeves look great, helps reduce misfires, Resists damaging chemicals, extends life of wire & boots. Non-flammable & protects against chemicals & resists water, Protect spark plug boots and spark plug wires from Excessive Engine and Exhaust Heat
- Keep your spark wire and spark plug cooler in a high temperature environment, Constructed with double layered, they create an effective non-flammable thermal barrier that will extend the life of your ignition wires
- Easy Installation; Just Slip On (Sewn End Over Spark Plug ) For Maximum Protection, Sleeves Can Withstand Heat Up To 1200 Degrees Using Patented Insultherm Technology
- See more on Amazon...
Brand: JDMSPEED | Manufacturer: JDMSPEED
Dimensions: 0.79 x 7.48 x 6.69 inches
See On Amazon #15
Spark Plug Protect Boot 1800 Degree Heat Shield Thermal Protection Insulator Sleeve Spark Plug Wire Boots 6 inch for Car Truck (Pack of 8) (Red)
Asin: B0D1Y491TT | Model: 001 | PartNumber: 001 | Ean: 0774049375077 | UPC: 774049375077
【Easy Installation】Just Slip On (Sewn End Over Spark Plug ) For Maximum Protection, Spark Plug Boot Heat Socks Can Withstand Heat Up To 1800 Degrees.Spark Plug Boot Heat Socks, Protect Your Expensive Plug Wire Set’S Performance And Increase Their Lifetime..
【Superiority】Each Universal Spark Plug Wire Boots Is 6Inch Length, Boots Will Work With 90 Degree, 45 Degree, And Straight Spark Plug Boots, Set Of 8 Black Spark Plug Wire Boot Sleeves,Made From Double Wall Braided Fiberglass Sleeving (Triple Wall At Sewn End)..
【Compatibility】8Pcs Spark Plug Boot Protector, Made From Fiberglass Material, Fits All Spark Plug Boots And Wires Up To 1800 Degrees Fahrenhett..
【Function】Spark Plug Wire Boot Sleeves Look Great, Helps Reduce Misfires,Resists Damaging Chemicals, Extends Life Of Wire & Boots.Non-Flammable & Protects Against Chemicals & Resists Water, Protect Spark Plug Boots And Spark Plug Wires From Excessive Engine And Exhaust Heat..
Features
- Fit This universal spark plug boot protector can fit most angled and straight boots,Can be used from ultimate race cars, street vehicles, to motor homes.
- Function Spark Plug Wire Boot Sleeves look great, helps reduce misfires,Resists damaging chemicals, extends life of wire & boots.non-flammable & protects against chemicals & resists water, Protect spark plug boots and spark plug wires from Excessive Engine and Exhaust Heat.
- Easy Installation Just Slip On (Sewn End Over Spark Plug ) For Maximum Protection, Spark plug boot heat socks Can Withstand Heat Up To 1800 Degrees.Spark plug boot heat socks, protect your expensive plug wire set s performance and increase their lifetime.
- Compatibility 8pcs spark plug boot protector, Made from fiberglass material, fits All Spark Plug Boots And Wires Up To 1800 Degrees Fahrenhett.
- Superiority Each universal Spark Plug Wire Boots is 6inch Length, Boots Will Work With 90 Degree, 45 Degree, And Straight Spark Plug Boots, Set of 8 Black Spark Plug Wire Boot Sleeves,Made From Double Wall Braided Fiberglass Sleeving (Triple Wall At Sewn End).
- See more on Amazon...
Brand: Hairchens | Manufacturer: Hairchens
Dimensions: 0.10 x 6.10 x 0.86 inches
See On Amazon #16
Heat Sleeve Automotive Fuel Line Heat Shield Auto Hose Spark Plug Wire heat Shield Protectors Boots Roll 2500 Degree for Car&Auto Wire Loom Brake Cable (3/4" IDX10', Titanium)
Asin: B09PZTY27H
✅ 【Heat Sleeve Specifications】 — This Hose Wire Heat Shield Roll Is Length Adjustable, The Shield Sleeve Wrap Can Be Easily Cut To The Proper Length For Each Spark Plug Boot/Wires. It Also Works Well With 90 Degrees, 45 Degrees, And Straight Spark Plug . High Quality Heat Shield To Help Protect Wires From Heat. This Heat Shield Sleeve：3/4"Idx10'length..
✅【After-Sale Service】 —We Offer Lifetime Service For This Automotive Wire Heat Shiel, Please Feel Free To Contact Us If You Have Any Question Or Dissatisfaction With This Titanium Spark Plug Wire Heat Shield After Purchase, We Will Reply Within 24 Hours. Package Includes:1 Roll Of Spark Plug Wire Heat Shield..
✅【Easy Installation】 —This Spark Plug Wire Heat Shield Are High Quality Basalt Material Specially Woven And Can Be Expanded And Shrunk By Fittings, Cables, Terminals, Etc. Simply Pull The Wires Inside, An Hoses, Cables, Etc. Heat Wrap Sleeves. The Insulation Heat Shield Sleeve Is Thin And Flexible And Easy To Install..
✅ 【Heat Shield Material】 — This Titanium Wire Heat Shield Sleeve Tape Is Made Of High Quality Basalt Material Which Can Withstand Higher Temperature Than Those Fiberglass Hose Heat Shield The Wire Heat Shield Wrap For Car Wire Can Help To Prevent Vapor Lock, Protect Spark Plug Wires From Melting,And Protect Sensitive Wire Looms From Close Proximity Heat,Shielding Brake Lines And Hose And Stopping Clutch Cables From Melting..
Features
- Heat Shield Sleeve This Wire Heat Shield Sleeve Tape can reduce 80 percent of radiant heat. The Titanium Wire Heat Shield wrap for car wire can withstand 2500 degree intermittment high temperature use. Widely used as a heat shield solution to spark plug wire which create a lot of heat,Provide protection to fuel line etc.
- Heat Shield Material This titanium wire heat shield sleeve tape is made of high quality basalt material which can withstand higher temperature than those fiberglass hose heat shield The wire heat shield wrap for car wire can help to prevent vapor lock, protect spark plug wires from melting,and protect sensitive wire looms from close proximity heat,shielding brake lines and hose and stopping clutch cables from melting.
- Heat Sleeve Specifications This Hose wire heat shield roll is length adjustable, The shield sleeve wrap can be easily cut to the proper length for each spark plug boot/wires. It also works well with 90 degrees, 45 degrees, and straight spark plug . high quality Heat Shield to help protect wires from heat. This Heat Shield Sleeve 3/4IDX10'length.
- Easy Installation This spark plug wire heat shield are high quality basalt material specially woven and can be expanded and shrunk by fittings, cables, terminals, etc. Simply pull the wires inside, AN hoses, cables, etc. Heat wrap sleeves. The insulation heat shield sleeve is thin and flexible and easy to install.
- After-sale Service We offer lifetime service for this automotive wire heat shiel, Please feel free to contact us if you have any question or dissatisfaction with this titanium spark plug wire heat shield after purchase, we will reply within 24 hours. Package Includes:1 roll of spark plug wire heat shield.
- See more on Amazon...
Brand: Ummickl | Manufacturer: Ummickl
See On Amazon #17
8pcs 2500 Spark Plug Wire Boots Protector Sleeve Heat Shield Cover for LS1/LS2 (Red)
Asin: B098NK1HNW | Ean: 0796175785230 | UPC: 796175785230
Heat Resistance - 8Pcs 6 Inches Black Spark Plug Wire Boots Can Rest Directly On Hot Headers And Other Engine Components Without Burning, Melting, Or Becoming Brittle..
1-Year Warranty - Customer Satisfaction Is Sdonestep Top Priority. In Order To Improve Customer Experience And The Spark Plug Wire Heat Sleeve Quality, If There’S Any Damage During Transit Or Questions During Use, Please Contact Us In Time, And We Will Provide A Full Replacement..
Easy To Instal - Spark Plug Boot Protector Just Slip On (Sewn End Over Spark Plug ) For Maximum Protection, No Tools..
High Quality - Spark Plug Heat Sleeve Is Made From Double Wall Braided Fiberglass Sleeving (Triple Wall At The Sewn End), Offers Great Durability, And Fits All Spark Plug Boots And Wires Up To 2500 Degrees Fahrenheit (1371° C)..
Features
- Wide Application - Spark plug wire heat shield fits most hot rods and classics engines including GM, Chevy, GMC, OLDS, CADILLAC, PONTIAC, Buick, Ford and Mopar, Chrysler, Dodge, Plymouth)
- High Quality - Spark plug heat sleeve is made from double wall braided fiberglass sleeving (triple wall at the sewn end), offers great durability, and fits all spark plug boots and wires up to 2500 degrees Fahrenheit (1371 C).
- Heat Resistance - 8PCS 6 inches black spark plug wire boots can rest directly on hot headers and other engine components without burning, melting, or becoming brittle.
- Easy to Instal - Spark plug boot protector just slip on (sewn end over spark plug ) for maximum protection, no tools.
- 1-Year Warranty - Customer satisfaction is SDonestep top priority. In order to improve customer experience and the spark plug wire heat sleeve quality, if there s any damage during transit or questions during use, please contact us in time, and we will provide a full replacement.
- See more on Amazon...
Brand: SDonestep | Manufacturer: SDonestep
See On Amazon #18
Heat Shield Sleeve Fuel Line Heat Shield Auto Hose Spark Plug Wire Cover Protectors Boots Roll 2500 Degree for Car&Auto Wire Loom Brake Cable (1" IDX10', Titanium)
Asin: B097NC4K6Y | Ean: 0711102583499 | UPC: 711102583499
【 Materials】 ：It Is Made With Two Layers Of High Temperature Titanium Material. The Thick Material Is Long Enough To Protect Spark Plug Wires As It Nears The Header Or Exhaust Manifold Helping To Increase Longevity Of Wire And Maintain Maximize Spark For As Long As You Keep Your Vehicle.It Can Withstand Heat Up To 2500 Degrees Intermittent..
【100% Guarantee】：We Will Refund You Immediately If You Don't Satisfied With The Item You Received. You Will Enjoy 12 Months Long Service. Any Problem Please Feel Free To Contact Us!.
【Easy Installation】：The Covers Are Easy To Slip In The Boot Heat Protector On To Each Boot Of The Spark Plug Wire. Just Slip The Large End (With The Sewn Stitching) Over The Boot. Then Carefully Slip The Ringed End Over The Boot That Connects To The Product..
【Perfect Use】：It Also Works Well With 90 Degrees, 45 Degrees, And Straight Spark Plug . Fits Most Hot Rods And Classics Engine. Also Fit For Most Angled & Straight Boots. Length Is About 10Ft Long..
Features
- Protection Wire Widely used as a solution to your burning spark plug wires which create a lot of heat. These universal spark plug wire cover can provide a good heat protection to spark plug wires especially on engines with excessive exhaust headers.
- Perfect Use It also works well with 90 degrees, 45 degrees, and straight spark plug . Fits most hot rods and classics engine. Also fit for most angled & straight boots. Length is about 10Ft long.
- Materials It is made with two layers of high temperature titanium material. The thick material is long enough to protect spark plug wires as it nears the header or exhaust manifold helping to increase longevity of wire and maintain maximize spark for as long as you keep your vehicle.It can withstand heat up to 2500 degrees intermittent.
- Easy Installation The covers are easy to slip in the boot heat protector on to each boot of the spark plug wire. Just slip the large end (with the sewn stitching) over the boot. Then carefully slip the ringed end over the boot that connects to the product.
- 100% Guarantee We will refund you immediately if you don't satisfied with the item you received. You will enjoy 12 months long service. Any problem please feel free to contact us!
- See more on Amazon...
Brand: XINPENGLIU | Manufacturer: XINPENGLIU
See On Amazon #19
LEDAUT Red 8Cyl Spark Plug Heat Shield Protector and 12pc Engine Spark Plug Wire Separator Insulating Fire Sleeve Spark Plug Wire Protector with Divider Suit for 8mm 9mm 10mm
Asin: B09XM2925C | Model: B09XM2925C | PartNumber: B09XM2925C
The Wire Separators Great For 8Mm/9Mm/10Mm Wires.Used The Sprak Plugs Wire,Well Protect The Wires..
Wire Separator Divider Are Made Of Aviation Grade Aluminum.Durable And Light Weight.Fixed And Organized The Engine Wires Perfectly .Makes Sprak Plugs Wire And The Engine Bay Look Neat..
The Spark Plug Wire Protector Reduces Misfires And Enhances Performance And Extends Life Of Wire & Boots.Universal Spark Plug Boots Fits For Most Angled Or Straight Boots..
Ledaut Spark Plug Boot Cover Is Made From Fiberglass Material,It Is Non-Flammable,Extreme Protect The Spark Plug Boots And Wires..
Features
- 6" long spark plug heat protector insulating fire sleeve(Pack of 8),12pcs Engine Spark Plug Wire Separator for 8 cylinder vehicles.
- LEDAUT spark plug boot cover is made from fiberglass material,it is non-flammable,extreme protect the spark plug boots and wires.
- The wire separators great for 8MM/9MM/10MM wires.used the sprak plugs wire,well protect the wires.
- The spark plug wire protector reduces misfires and enhances performance and extends life of wire & boots.Universal spark plug boots fits for most angled or straight boots.
- Wire separator divider are made of aviation grade aluminum.Durable and light weight.Fixed and organized the engine wires perfectly .makes sprak plugs wire and the engine bay look neat.
- See more on Amazon...
Brand: LEDAUT | Manufacturer: Hangzhou Awake Seal Co., Ltd
See On Amazon #20
Spark Plug Wire Heat Shield - 8 PCS 2500 Spark Plug Wire Boots Protector, 6 Inches Spark Plug Heat Sleeve Protection Cover Replacement for LS1 / LS2 SBC BBC 350 454 Car Truck, Titanium
Asin: B0BYNC56TD | Model: Qintisoy14 | PartNumber: Qintisoy14 | Ean: 0735372956838 | UPC: 735372956838
🚕Improved Engine Performance: By Reducing The Heat That's Transferred To Your Spark Plug Wires, This Spark Plug Wire Protector Can Help To Improve Ignition Performance And Reduce The Risk Of Misfires..
🚕Essential Component: Whether You're Building A High-Performance Engine Or Just Want To Protect Your Existing Engine From Heat Damage, This Spark Plug Heat Protection Is An Essential Component That Can Help To Extend The Life Of Your Engine Wires..
🚙Durable Protection: The Spark Plug Heat Sleeve Provides Reliable Protection For Your Spark Plug Wires, Helping To Prevent Premature Wear And Damage..
🚙Universal Perfect Fit: This Spark Plug Wire Boots Heated Shield Is Designed To Fit Most Motor Vehicle Engines And Is Easy To Install, Making It A Versatile Addition To Any Engine Bay..
Features
- High-temperature Resistance: The spark plug wire boot is made from materials that can withstand temperatures of up to 2500 degree, protecting your spark plug wires from damage caused by high engine temperatures.
- Universal Perfect Fit: This spark plug wire boots heated shield is designed to fit most motor vehicle engines and is easy to install, making it a versatile addition to any engine bay.
- Improved Engine Performance: By reducing the heat that's transferred to your spark plug wires, this spark plug wire protector can help to improve ignition performance and reduce the risk of misfires.
- Durable Protection: The spark plug heat sleeve provides reliable protection for your spark plug wires, helping to prevent premature wear and damage.
- Essential Component: Whether you're building a high-performance engine or just want to protect your existing engine from heat damage, this spark plug heat protection is an essential component that can help to extend the life of your engine wires.
- See more on Amazon...
Brand: Qintisoy | Manufacturer: Qintisoy
Dimensions: 0.70 x 6.00 x 5.00 inches
See On Amazon
Looking For Something Else?
Search