Drive Shaft CVD Axles Upgrades for 1/10 Slash VXL 4x4 Rustler Stampede Hoss VXL 4x4 4WD,4Pcs Front Rear Transmission Driveshaft Parts Hops Up,Navy Blue(Upgrades in 2023)
Asin: B0C3GT7SFF
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.🚗【Strength And Precision】: The Rc Driveshaft Is With More Turning Power And More Sturdy Use ,High Reliability, Ensuring Smooth Transmission.The Rc Car Upgrades Parts Highly Increase The Strength And Precision..
🔥【Easy To Install】: The Upgrades Part Comes With Screws,Bearings, Ptfe Washers,Easy To Replace The Original Parts..
👏【What You Get】If You Are Not 100% Completely Satisfied With Our Products, Please Do Not Hesitate To Contact Us To Request A Refund Or Exchange! Your Satisfaction Is Our Main Priority..
🚗【Upgrade To Greater Strength】: The Axles Drive Shaft Made From Harden Steel #45 For Greater Strength And Stable Driving Performance.Tough Steel For Long-Lasting Durability And Low Wear..
Features
- Fits For :The cvd drive shaft fits for 1/10 Rustler 4x4 / Rustler 4x4 VXL; Slash 4x4 / Slash VXL 4x4 / Slash 4x4 Utimate; Stampede 4x4 / Stampede 4x4 VXL; Hoss 4X4 VXL.
- Upgrade to Greater Strength : The axles drive shaft made from harden steel #45 for greater strength and stable driving performance.Tough steel for long-lasting durability and low wear.
- Strength and Precision : The rc Driveshaft is with more turning power and more sturdy use ,High reliability, ensuring smooth transmission.The rc car upgrades parts highly increase the strength and precision.
- What You Get If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange! Your Satisfaction is Our Main Priority.
- Easy to Install : The upgrades part comes with screws,bearings, PTFE washers,easy to replace the original parts.
- See more on Amazon...
Brand: ARRCat | Manufacturer: ARRCat
See On Amazon Similar To Drive Shaft CVD Axles Upgrades
#1
HAIBOXING 1:18 Scale RC Monster Truck 18859E 36km/h Speed 4X4 Off Road Remote Control Truck,Waterproof Electric Powered RC Cars All Terrain Toys Vehicles with 2 Batteries,Xmas Gifts for kid and Adults
Asin: B08JZBZCXN
【Hobby Class Vehicle Equipment】Living Up To Hobby Grade Rc Car Standards, This 4Wd Trucks Engages 16 Ball Bearings, Metal Drive Shafts And Quality Gears In The Drive Train To Minimize The Power Loss. Quality Pa Material Framework Is Flexible And Substantial Against Collisions. Parts Are All Replaceable On Amazon For Regular Maintenance, And Also Optional Parts For Upgraded Preference..
【Delivering Great Maneuverability】This Rc Cars For Boys And Adults Is Versatile For Running In Yards Or Gardens, On Grass Or Sand, On Gravels, On Hard Or Soft Concrete Grounds. It Is More Of A Creative Hobby Grade Truck That Not Only Grows Children On Hobby Interests But Develops Children On Manipulative Abilities As Well. This Toys Car Is Sure To Be The Favorite If You Are Looking For A Xmas Or Birthday Present For Friends And Kids. Enjoy Sunshine And Play Outdoors With Our Rc Products..
【Versatile Electronic Protections】Ipx4 Splash Waterproof Electronic Speed Control Enables This All Terrain Rc Car To Take On Realistic Off-Road Performance. This Radio Controlled Car Can Be Driven In Many Weather Conditions. It Can Go Across Water Puddles And Muddy Places. Never Run Into Salty Seawater. Electronic System Functions Overheat Protection, Anti-Jam Protection And Low Battery Voltage Cutoff. Equipped With Two T-Plug 25C Li-Po Battery Packs Among Which The One Is Pre-Installed In The Vehicle, Extending Your Runtime To Over 30 Minutes..
【Full-Function Radio System】This Off Road Truck Employs An Enhanced Version Powerful 380 Brush Motor Which Powers A Top Speed Up To 36Km/H. Full-Function Proportional 2.4Ghz Radio Control Reflects A 280-Feet-Control Range, Forward/Brake/Backward, With No Signal Inference When The Fast Rc Car Is Raced With Your Friends. What Is More, Normal/Slow Speed Switch Is Specified For Beginners And Children To Pick Up..
Features
- New Version Oversize 1/18th Truck Oversize 1/18th Scale 4WD remote control car big wheel rc monster truck, released in 2020 new design version with LED headlight, features independent suspensions and reinforced truck chassis design practising high speed durability. Great fun to drive. Proportional steering and throttle conduct responsive agileness. Vivid with user-friendly body clips and DIY body decals, this 4x4 high speed rc truck stands high in selection.
- Full-Function Radio System This Off road truck employs an enhanced version powerful 380 brush motor which powers a top speed up to 36km/H. Full-function proportional 2.4GHz radio control reflects a 280-feet-control range, forward/brake/backward, with no signal inference when the fast rc car is raced with your friends. What is more, Normal/slow speed switch is specified for beginners and children to pick up.
- Hobby Class Vehicle Equipment Living up to hobby grade rc car standards, this 4WD trucks engages 16 ball bearings, metal drive shafts and quality gears in the drive train to minimize the power loss. Quality PA material framework is flexible and substantial against collisions. Parts are all replaceable on Amazon for regular maintenance, and also optional parts for upgraded preference.
- Versatile Electronic Protections IPX4 Splash waterproof electronic speed control enables this all terrain rc car to take on realistic off-road performance. This radio controlled car can be driven in many weather conditions. It can go across water puddles and muddy places. Never run into salty seawater. Electronic system functions overheat protection, anti-jam protection and low battery voltage cutoff. Equipped with two T-plug 25C Li-Po battery packs among which the one is pre-installed in the vehicle, extending your runtime to over 30 minutes.
- Delivering great maneuverability This rc cars for boys and adults is versatile for running in yards or gardens, on grass or sand, on gravels, on hard or soft concrete grounds. It is more of a creative hobby grade truck that not only grows children on hobby interests but develops children on manipulative abilities as well. This toys car is sure to be the favorite if you are looking for a Xmas or birthday present for friends and kids. Enjoy sunshine and play outdoors with our RC products.
- See more on Amazon...
Brand: HAIBOXING | Manufacturer: Shantou Haiboxing Technology&Education Model Co., Ltd.
Dimensions: 4.20 x 9.80 x 7.90 inches | Weight: 1.90 pounds
Warranty: 90 Day Warranty Against Manufacturer Defects
See On Amazon #2
Traxxas TRA6852A Driveshaft Assembly, Rear, Extreme Heavy Duty (1)
Asin: B07HJHQT1P | Model: 6852A | PartNumber: 6852A | Ean: 0020334685254 | UPC: 020334685254
Brand: Traxxas | Manufacturer: Traxxas
Dimensions: 3.00 x 1.00 x 6.00 inches | Weight: 0.00 Pounds
See On Amazon #3
Jetwood 1/16 Fast Remote Control Car for Adults, Electric 4WD RTR Brushless RC Cars, High Speed RC Truck Gifts for Boys, Max 42 mph Offroad Buggy, JC16EP with 2 Lipo
Asin: B0BNWX6HTG | Model: JC16EP | PartNumber: JC16EP
【Solid Built & Metal Parts】Honeycomb Chassis & Metal Oil-Filled Shocks Overcome Impact, Twist And Vibration. Massive Metal Parts Equipped Such As Ball Bearings, F/R Zinc Bumper, Alloy Cvd Shafts And Metal Big Gears. Metal Differential Assembly Withstands Huge 20.5N Cm Torque. Batteries Packed With Flame-Retardant Hard Cases.
【Unique Design & Diy Ability】High-Quality Pvc Transparent Car Shell Come In The Box For Diy Needs. Decorative Shell And Chassis Stickers Bring Greater Fun To Play. Perfect Gifts For Adults Boys And Kids.
【Excellent Radio Controlled System】Quick Response 2.4Ghz 3Ch System Pistol Grip Transmitter. 3 Tunning Modes, Throttle Midpoint, Power Output, Steering Angle Accurate Your Ride. Over 390Ft Long Distance And Low Latency Allow You To Race Without Interference.
【Upgrade Potential 】Perfect Rc Car For Both Beginners And Advanced Players. Huge Upgrade Potentials Such As, Next Level 3S Battery, Steel Transmission Parts, Differentials, Led Bumper, New Designed Car Shells, Decoration Stickers And More.
Features
- 42/28mph Brushless Speed Machine All new design 1:16 RC car powered by 4200kv 2845 brushless motor. Hits top speed at 28mph (45khp) with the 2S batteries come in the box. Squeezing all power to hit 42mph with upgrade 3S Li-Po battery. Equipping independent 45A ESC with IPX5 waterproof feature
- Upgrade Potential Perfect RC car for both beginners and advanced players. Huge upgrade potentials such as, next level 3s battery, steel transmission parts, differentials, LED bumper, new designed car shells, decoration stickers and more
- Solid Built & Metal Parts Honeycomb chassis & metal oil-filled shocks overcome impact, twist and vibration. Massive metal parts equipped such as ball bearings, F/R zinc bumper, alloy CVD shafts and metal big gears. Metal differential assembly withstands huge 20.5N cm torque. Batteries packed with flame-retardant hard cases
- Excellent Radio Controlled System Quick response 2.4Ghz 3CH system Pistol Grip transmitter. 3 tunning modes, throttle midpoint, power output, steering angle accurate your ride. Over 390ft long distance and low latency allow you to race without interference
- Unique Design & DIY Ability High-quality PVC transparent car shell come in the box for DIY needs. Decorative shell and chassis stickers bring greater fun to play. Perfect Gifts for Adults Boys and Kids
- See more on Amazon...
Brand: Jetwood | Manufacturer: Jetwood
Dimensions: 3.80 x 11.70 x 8.60 inches | Weight: 3.62 Pounds
Warranty: 90 Day Warranty Against Manufacturer Defects
See On Amazon #4
INJORA +5mm Diamond Portal Axles with Lay Down Servo Mount & Links for 1/18 RC Crawler TRX4M Upgrade
Asin: B0D3BWVP27 | Model: 4M-104BKFR | PartNumber: 4M-104BKFR
+5Mm Axles Increase The Width Of Each Side By 5Mm, Increase Total Length By 10 Mm, Providing Better Stability And Climbing Performance..
Pre-Assembled Complete Axles. Please Grease The Axles Before Installation..
The Entire Axles Have Been Extended, Not Just The Dogbone Shafts, Which Prevents The Dogbone Shafts From Being Overburdened..
Come With A Servo-On-Axle Lay Down Servo Mount, Hardened Cvd Shafts, 12/24T Axle Gears, 15/20T Portal Gears, Brass Wheel Hexes And Nuts..
Features
- INJORA portal axles lift the pumpkin to provide ground clearance, diamond shaped pumpkin for more realistic scale look.
- Come with a servo-on-axle lay down servo mount, hardened CVD shafts, 12/24T axle gears, 15/20T portal gears, brass wheel hexes and nuts.
- +5mm axles increase the width of each side by 5mm, increase total length by 10 mm, providing better stability and climbing performance.
- The entire axles have been extended, not just the dogbone shafts, which prevents the dogbone shafts from being overburdened.
- Pre-assembled complete axles. Please grease the axles before installation.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
Dimensions: 1.57 x 5.12 x 3.54 inches
See On Amazon #5
2Pcs Rear CVD Drive Shaft Heavy Duty Axis Replacement Parts Compatible with 1/10 RC Cars Traxxas Slash/Rustler/Stampede/Hoss VXL 4X4 Platinum Ultimate Update Parts
Asin: B0BWQZVBX4 | Model: DS-CVD-2R | PartNumber: DS-CVD-2R
▶Performance: Ingenious Design, Professional Manufacturing And Fine Workmanship, High Reliability, Ensuring Smooth Transmission..
▶Easy To Install: These Rc Cars Drive Shaft Cvd Comes With Screws And Nuts And Easy To Use, You Can Directly Use Them On Your Rc Car Model. If You Have Any Questions During Use It, Please Contact Us Anytime..
▶Separate Use Or Use Together: Good Compatibility, Suitable For Most 1/10 Traxxas Rc Car Models, You Can Separate These Front And Rear Drive Shaft Cvd Or Use Them Together According To Your Needs..
▶High Quality Material: Cvd Drive Shaft Made Of High-Quality Metal Materials: Middle Part And Wheel Hex Adaptor Is Made Of 6061-T6 Alloy, Axle Part Is Made Of Update Material Q235 Carbon Steel, Ensuring Maximum Durability And For Long Time Service Life..
Features
- Compatibility: 2Pcs Rear drive shaft CVD heavy duty replacement parts, compatible with 1/10 scale Traxxas Slash Platinum/Ultimate/VXL 4x4 2WD, Hoss 4X4 VXL,2WD, Rustler 4X4 VXL,2WD, Stampede 4X4 VXL 2WD etc.
- High Quality Material: CVD drive shaft made of high-quality metal materials: middle part and wheel hex adaptor is made of 6061-T6 alloy, axle part is made of update material Q235 Carbon steel, ensuring maximum durability and for long time service life.
- Performance: Ingenious design, professional manufacturing and fine workmanship, high reliability, ensuring smooth transmission.
- Separate use or use together: Good compatibility, suitable for most 1/10 traxxas rc car models, you can separate these front and rear drive shaft CVD or use them together according to your needs.
- Easy to install: these rc cars drive shaft CVD comes with Screws and nuts and easy to use, you can directly use them on your RC car model. If you have any questions during use it, please contact us anytime.
- See more on Amazon...
Brand: ARRAROWN | Manufacturer: DideaECO
Dimensions: 0.39 x 4.30 x 0.65 inches
See On Amazon #6
6851x Replacement Compatible with Traxxas Slash 4X4 and Stampede 4X4 Models Front Heavy Duty Driveshaft Assembly
Asin: B0952N6DTV | Model: W-6851 | PartNumber: W-6851
Features: It Will Only Fit Front Axles, Either The Left Or Right.
This Is Non-Original Aftermarket Parts..
Includes: (2) Front Driveshaft Assembly. (Caution: If You Take A Car To A Flying Slope, There Will Be A Risk Of Breaking Once It Falls, So You Need To Spare Several Sets Of Front Drive Shafts!!!).
Replacement Part For These Models: Compatible With Slash 4X4 Platinum; Slash 4X4 Vxl; Slash 4X4; Stampede 4X4 Unassembled Kit; Stampede 4X4 Vxl; Stampede 4X4.
Features
- TRA6851X Compatible with Traxxas - Front Driveshaft Assembly, Extreme Heavy Duty
- Replacement part for these models: Compatible with Slash 4X4 Platinum; Slash 4X4 VXL; Slash 4X4; Stampede 4X4 Unassembled Kit; Stampede 4X4 VXL; Stampede 4X4
- Features: It will only fit front axles, either the left or right
- Includes: (2) Front Driveshaft Assembly. (CAUTION: If you take a car to a flying slope, there will be a risk of breaking once it falls, so you need to spare several sets of front drive shafts!!!)
- This is Non-Original Aftermarket Parts.
- See more on Amazon...
Brand: Wadoy | Manufacturer: Wadoy
See On Amazon #7
Axial Driveshaft Set, Short/Medium/Long: SCX24, AXI31611
Asin: B07SF7JDQS | Model: AXI31611 | PartNumber: AXI31611 | Ean: 0605482298558 | UPC: 605482298558
First Available: 09/24/2022
Brand: Axial | Manufacturer: Axial
Dimensions: 0.32 x 4.00 x 2.50 inches | Weight: 0.02 Pounds
See On Amazon #8
INJORA Front&Rear Axles Set - +4mm Extended Aluminum Complete Axles for TRX4M Upgrade 1/18 RC Crawler Car
Asin: B0CFDMKTVF | Model: 4M-61FR | PartNumber: 4M-61FR
[Upgrade Accessories] Come With Hardened Cvd Shafts, Steel 12/24T Gears, 5Mm(+1Mm) Brass Wheel Hexes And Nuts..
[Wide Application] Designed Specifically For Trx4m Bronco Defender K10 High Trai 1/18 Rc Crawler. Note：As The Axle Housings Are Extended, So They Are Not Compatible With Original Trx4m Size Steering Links And Dogbone Shafts..
[Pre Assembly] Pre-Assembled Make Installation More Simpler, Coming With All Hardware For The Axles..
[Unique Design] +4Mm Axles Increase The Width Of Each Side By 4Mm, Increase Total Length By 8 Mm. 4Mm Extended Desgin Provides Better Stability And Climbing Performance..
Features
- [Well Performance] CNC machined and black anodized, excellent workmanship and high precision.
- [Unique design] +4mm axles increase the width of each side by 4mm, increase total length by 8 mm. 4mm extended desgin provides better stability and climbing performance.
- [Upgrade Accessories] Come with Hardened CVD shafts, steel 12/24T gears, 5mm(+1mm) brass wheel hexes and nuts.
- [Pre Assembly] Pre-assembled make installation more simpler, coming with all hardware for the axles.
- [Wide Application] Designed specifically for TRX4M Bronco Defender K10 High Trai 1/18 RC crawler. Note As the axle housings are extended, so they are not compatible with original TRX4M size steering links and dogbone shafts.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
Dimensions: 1.57 x 5.12 x 3.15 inches
See On Amazon #9
Traxxas TRA6851A Driveshaft Assembly, Front, Extreme Heavy Duty (1)
Asin: B07HJH6YZ4 | Model: 6851A | PartNumber: 6851A | Ean: 0020334685155 | UPC: 020334685155
Includes: (1) Front Driveshaft Assembly (1) Screw Pin.
Part Number(S) Included (In Factory Packaging): 6851A.
Specs:.
Features: Left Or Right Installation.
Features
- Traxxas 6851A - Front Driveshaft Assembly, Extreme Heavy Duty
- Features: Left or Right Installation
- Includes: (1) Front Driveshaft Assembly (1) Screw Pin
- Specs:
- Part number(s) included (in factory packaging): 6851A
- See more on Amazon...
Brand: Traxxas | Manufacturer: Traxxas
Dimensions: 1.00 x 2.50 x 3.00 inches | Weight: 0.04 pounds
See On Amazon #10
INJORA Steel Heavy-Duty Drive Shaft for 1/10 RC Car Crawler Axial SCX10 90046 AXI03007 TRX4 Redcat Gen8(94-119mm)
Asin: B0B8N5BXGX | Model: DG-CD03-94 | PartNumber: DG-CD03-94
4Mm Set Pins Included To Attach To Pinion And Transmission.
Suit For 1/10 Rc Car Crawler Axial Scx10 90046 Axi03007 Trx4 Redcat Gen8.
Splined Engagement, Fit 5Mm Output Shaft. Scale Joint And Spline Diameter Size For Realistic Appearance.
Hardened Steel Construction, Long Service Life.
Features
- Universal joint style, six length sizes to choice
- Hardened steel construction, long service life
- 4mm set pins included to attach to pinion and transmission
- Splined engagement, fit 5mm output shaft. Scale joint and spline diameter size for realistic appearance
- Suit for 1/10 RC Car Crawler Axial SCX10 90046 AXI03007 TRX4 Redcat Gen8
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon
Looking For Something Else?
Search