Current Transformer, PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter, Slide Holders
Asin: B0C3ZGN8M2 | Model: Marhynchusshnkqcf25p | PartNumber: Marhynchusshnkqcf25p
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Good Mechanical Properties: Fully Enclosed, Good Mechanical Properties And Environmental Resistance, Strong Voltage Isolation Capability, Safety And Reliability..
Used For Energy Meter In Special: Used For Energy Meter In Special; Ac 220V, 380V Power Supply Can Both Be Applied..
Snap Joint Structure:The Diameter Of Inner Hole Is 16Mm, The Accuracy Is ≤0.5 Grade, Using Snap Joint Structure, It Can Be Fixed To The Cable Directly Through Nylon Ties..
Small And Light: This Current Transformer Built-In Input Coil; Small And Light, Easy To Install..
Features
- USED FOR ENERGY METER IN SPECIAL: Used for energy meter in special; AC 220v, 380v power supply can both be applied.
- SMALL AND LIGHT: This current transformer Built-in input coil; small and light, easy to install.
- GOOD MECHANICAL PROPERTIES: Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability.
- SNAP JOINT STRUCTURE:The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties.
- USED FOR ENERGY METER IN SPECIAL: Used for energy meter in special; AC 220v, 380v power supply can both be applied.
- See more on Amazon...
Brand: Marhynchus | Manufacturer: Marhynchus
See On Amazon Similar To Current Transformer PZCT02 Split Core
#1
DAOKI SCT013 Split-core Current Transformer Non-invasive Sensor AC 100A 50MA Split Core with ADS1115 +Audio Cable Female+10PIN Male and Female Dupont Wire
Asin: B091XXY98J | Model: JK-US-026 | PartNumber: JK-US-026
【Construction And Protection】：Use This Split Core Current Sensor To Build Your Own Energy Monitor, Reducing Your Power Usage, Or Use It Build An Over-Current Protection Device For An Ac Load..
【Safety Index】：Dielectric Strength (Between Shell And Output) 6000V Ac/1Min Flame Retardant Characteristics Meet Ul94-V0..
【Nature And Appearance】：Input Current: 0~100A Ac; Length Of Leading Wire: 1M; Two Form Of Output: Current Output Or Voltage Output (Burden Resistor Needed To Add); Cable Jack: 3.5Mm (Like A Headphone Jack)..
【Application Scenario】：Used For Current Measurement, Monitoring And Protection Of Ac Motors, Lighting Equipment, Air Compressors, Etc..
Features
- Measurement scenario : This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation.
- Application scenario Used for current measurement, monitoring and protection of AC motors, lighting equipment, air compressors, etc.
- Construction and protection Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load.
- Nature and appearance Input Current: 0~100A AC; Length of Leading Wire: 1m; Two Form of Output: current output or voltage output (burden resistor needed to add); Cable Jack: 3.5mm (like a headphone jack).
- Safety index Dielectric strength (between shell and output) 6000V AC/1min Flame retardant characteristics meet UL94-V0.
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Weight: 0.22 pounds
See On Amazon #2
HiLetgo 3pcs ZMCT103C 5A AC Current Sensor Current Transformer Module Single Phase Active Analog Signal Output with OP Amp
Asin: B0CDWWYLMQ | Model: 3-01-1817 | PartNumber: 3-01-1817
On-Board Micro-Precision Current Transformer And Sampling Resistor.
Single Phase Active Analog Signal Output With Op Amp.
5A Can Be Measured Within An Alternating Current, The Analog Output Corresponding To 5A/5Ma.
Features
- ZMCT103C 5A AC Current Sensor Current Transformer Module
- 5A can be measured within an alternating current, the analog output corresponding to 5A/5mA
- On-board micro-precision current transformer and sampling resistor
- Single Phase Active Analog Signal Output with OP Amp
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
SYUAB 2Pcs SCT013000 Split Core Current Transformer SCT-013-000 Non-invasive AC Current Sensor 100A/50mA (SYKHSCGQ)
Asin: B09MRVTQ8B | Model: SYKHSCGQ | PartNumber: SYKHSCGQ | Ean: 0723497180443 | UPC: 723497180443
Reliabilityfully Compatible With Most Similar Products; The Number Of Opening And Closing Times Is Not Less Than 1000 (Tested At 20℃); This Split Core Current Transformer Is Particularly Suitable Which Can Use For A Long Time For Diy Use And It Works Well With Arduino And Raspberry Pi..
Package Include 2Pcs X Sct-013-000 Split Core Current Transformer Sensor.
Non-Linearity ± 3% (10% ~ 120% Rated Input Current) Two Output Forms Of Current And Voltage (Voltage Output Type Built-In Sampling Resistor)..
Applicationssuitable For Current Measuring, Monitoring And Protection Of Ac Motors, Lighting Equipment, Air Compressors, Etc..
Features
- SpecificationOpening size: 13mm 13mm; frequency: 50HZ-150KHZ; working temperature: -25 +70 ; lead length: 1.5 meters, standard 3.5 three-pin plug outpu
- ApplicationsSuitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc.
- ReliabilityFully compatible with most similar products; the number of opening and closing times is not less than 1000 (tested at 20 ); this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi.
- Non-linearity 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor).
- Package Include 2Pcs x SCT-013-000 Split Core Current Transformer Sensor
- See more on Amazon...
Brand: SYUAB | Manufacturer: SYUAB
See On Amazon #4
AC Current Sensor Transformer, Core Current Transformer Coil Sensor for 200A Amp Energy Meter
Asin: B0B91R55TS | Model: 3395597999613 | PartNumber: 3395597999613 | Ean: 3395597999613
Good Mechanical Properties: Fully Enclosed, Good Mechanical Properties And Environmental Resistance, Strong Voltage Isolation Capability, Safety And Reliability..
Mini Size:This Is A Mini Split Base Current Transformer; It's The Smallest One Compared To The Similar Products (Output 5Ma)..
Used For Energy Meter In Special: Current Transducer Used For Energy Meter In Special; Ac 220V, 380V Power Supply Can Both Be Applied..
Snap Joint Structure:The Diameter Of Inner Hole Is 24Mm, The Accuracy Is 0.5 Grade, Using Snap Joint Structure, It Can Be Fixed To The Cable Directly Through Nylon Ties..
Features
- SMALL AND LIGHT: This current transformer Built-in input coil; small and light, easy to install.
- SNAP JOINT STRUCTURE:The diameter of inner hole is 24mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties.
- GOOD MECHANICAL PROPERTIES: Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability.
- USED FOR ENERGY METER IN SPECIAL: Current transducer used for energy meter in special; AC 220v, 380v power supply can both be applied.
- MINI SIZE:This is a mini split base current transformer; it's the smallest one compared to the similar products (output 5MA).
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
Dimensions: 1.26 x 2.56 x 2.13 inches | Weight: 0.50 pounds
See On Amazon #5
PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter
Asin: B07G16GBMS | Ean: 0700890345150, 0792172983594 | UPC: 792172983594, 700890345150
Good Mechanical Properties: Fully Enclosed, Good Mechanical Properties And Environmental Resistance, Strong Voltage Isolation Capability, Safety And Reliability..
Mini Size:This Is A Mini Split Base Current Transformer; It's The Smallest One Compared To The Similar Products (Output 100Ma)..
Used For Energy Meter In Special: Current Transducer Used For Energy Meter In Special; Ac 220V, 380V Power Supply Can Both Be Applied..
Snap Joint Structure:The Diameter Of Inner Hole Is 16Mm, The Accuracy Is 0.5 Grade, Using Snap Joint Structure, It Can Be Fixed To The Cable Directly Through Nylon Ties..
Features
- SMALL AND LIGHT: This current transformer Built-in input coil; small and light, easy to install.
- SNAP JOINT STRUCTURE:The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties.
- GOOD MECHANICAL PROPERTIES: Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability.
- USED FOR ENERGY METER IN SPECIAL: Current transducer used for energy meter in special; AC 220v, 380v power supply can both be applied.
- MINI SIZE:This is a mini split base current transformer; it's the smallest one compared to the similar products (output 100MA).
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.13 Pounds
See On Amazon #6
SYUAB 4Pcs 100A/50mA SCT013000 Non-invasive Split Transformer Sensor SCT-013-000 Split Core Current Sensor Transformer, Blue, 4psct100A
Asin: B09YRBVNZW | Model: 4psct100A | PartNumber: 4psct100A | Ean: 0723497180696 | UPC: 723497180696
Specification Opening Size: 13Mm × 13Mm; Frequency: 50Hz-150Khz; Working Temperature: -25℃～+70℃; Lead Length: 1.5 Meters, Standard Φ3.5 Three-Pin Plug Outpu.
Package Include 4Pcs X Sct-013-000 Split Core Current Transformer Sensor.
Non-Linearity 3% (10% 120% Rated Input Current) Two Output Forms Of Current And Voltage (Voltage Output Type Built-In Sampling Resistor)..
Reliability Fully Compatible With Most Similar Products; The Number Of Opening And Closing Times Is Not Less Than 1000 (Tested At 20℃); This Split Core Current Transformer Is Particularly Suitable Which Can Use For A Long Time For Diy Use And It Works Well With Arduino And Raspberry Pi..
Features
- Applications Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc.
- Reliability Fully compatible with most similar products; the number of opening and closing times is not less than 1000 (tested at 20 ); this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi.
- Specification Opening size: 13mm 13mm; frequency: 50HZ-150KHZ; working temperature: -25 +70 ; lead length: 1.5 meters, standard 3.5 three-pin plug outpu
- Non-linearity 3% (10% 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor).
- Package Include 4Pcs x SCT-013-000 Split Core Current Transformer Sensor
- See more on Amazon...
Brand: SYUAB | Manufacturer: SYUAB
See On Amazon #7
Comimark 2Pcs DL-CT08CL5-20A/10mA 2000/1 0~120A Micro Current Transformer
Asin: B07WFF9W96 | Ean: 0657835682156 | UPC: 657835682156
Error Ratio (F): ≤ ± 0.1%.
If You Are Not Satisfied With Your Purchase For Any Reason, Please Feel Free To Contact Us At The Buyer Center Or Support Email, 24/7 Quick Reply.
Package Included: 2 X Dl-Ct08cl5 20A/10Ma 2000/1 0~120A Micro Current Transformer.
Rated Output Current: 0 ~ 10Ma.
Features
- Rated Input Current: 0 ~ 20A
- Rated Output Current: 0 ~ 10mA
- Error Ratio (f): 0.1%
- Package Included: 2 x DL-CT08CL5 20A/10mA 2000/1 0~120A Micro Current Transformer
- If You Are Not Satisfied with Your Purchase for Any Reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply
- See more on Amazon...
Brand: Comimark | Manufacturer: Comimark
See On Amazon #8
Jeanoko PZCT-02 Split Core Current Transformer Coil Sensor Split Core Current Transformer for 100A Amp Energy Meter
Asin: B08P5NH98Q | Ean: 9588081750805
The Snap Joint Structure Of This Transformer Allows For Easy And Direct Attachment To Cables Using Nylon Ties. This Simplifies The Installation Process And Ensures A Secure And Reliable Connection..
The Transformer Is Fully Enclosed, Ensuring Good Mechanical Properties And Environmental Resistance. It Is Capable Of Withstanding A Range Of Conditions, Making It Suitable For Various Environments. The Strong Voltage Isolation Capability Adds An Extra Layer Of Safety And Reliability To The Device..
Being Small And Light In Weight, This Current Transformer Is Easy To Handle And Install. It Comes With A Built-In Input Coil, Further Contributing To Its Compactness And Ease Of Use..
With A 16Mm Inner Hole Diameter, This Current Transformer Offers Accurate Measurements With A Precision Grade Of ≤0.5. It Ensures Reliable And Precise Data For Your Electrical Current Monitoring Needs..
Features
- The Mini Current Transformer is a compact split base current transformer, designed to be the smallest in size compared to similar products. It provides an output of 100MA, suitable for various applications.
- With a 16mm inner hole diameter, this Current Transformer offers accurate measurements with a precision grade of 0.5. It ensures reliable and precise data for your electrical current monitoring needs.
- The snap joint structure of this transformer allows for easy and direct attachment to cables using nylon ties. This simplifies the installation process and ensures a secure and reliable connection.
- Being small and light in weight, this Current Transformer is easy to handle and install. It comes with a built-in input coil, further contributing to its compactness and ease of use.
- The transformer is fully enclosed, ensuring good mechanical properties and environmental resistance. It is capable of withstanding a range of conditions, making it suitable for various environments. The strong voltage isolation capability adds an extra layer of safety and reliability to the device.
- See more on Amazon...
Brand: Jeanoko | Manufacturer: Jeanoko
Dimensions: 0.79 x 3.15 x 2.36 inches | Weight: 0.13 Pounds
See On Amazon #9
SYUAB 2Pcs 30A/1V SCT013000 Non-invasive Split Transformer Sensor SCT-013-000 Core Current
Asin: B09YRF9JXR | Model: 30Asct | PartNumber: 30Asct | Ean: 0723497180719 | UPC: 723497180719
【Reliability】Fully Compatible With Most Similar Products; The Number Of Opening And Closing Times Is Not Less Than 1000 (Tested At 20℃); This Split Core Current Transformer Is Particularly Suitable Which Can Use For A Long Time For Diy Use And It Works Well With Arduino And Raspberry Pi.
Package Include 2Pcs X Sct-013-000 Split Core Current Transformer Sensor.
【Specification】Opening Size: 13Mm × 13Mm; Frequency: 50Hz-150Khz; Working Temperature: -25℃～+70℃; Lead Length: 1.5 Meters, Standard Φ3.5 Three-Pin Plug Outpu.
【Applications】Suitable For Current Measuring, Monitoring And Protection Of Ac Motors, Lighting Equipment, Air Compressors, Etc.
Features
- Non-linearity 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)
- Applications Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc
- Reliability Fully compatible with most similar products; the number of opening and closing times is not less than 1000 (tested at 20 ); this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi
- Specification Opening size: 13mm 13mm; frequency: 50HZ-150KHZ; working temperature: -25 +70 ; lead length: 1.5 meters, standard 3.5 three-pin plug outpu
- Package Include 2Pcs x SCT-013-000 Split Core Current Transformer Sensor
- See more on Amazon...
Brand: SYUAB | Manufacturer: SYUAB
See On Amazon #10
DAOKI 5 pcs 5A Current Transformer ZMCT103C AC Sensor Single Phase Current Transformer Module Current Sensor AC Active Output Onboard Precision with Dupont Line for Arduino
Asin: B091TQK3YC | Model: JK-US-051 | PartNumber: JK-US-051
【Analog Current Output】：The Module Can Measure The Ac Current Within 5A, And Corredsponding Output Is 5A/5Ma.
【Original】：Our Electronic Components Are 100% Original Manufacturing, Please Rest Assured To Buy Our Products.
【Small Size】：Current Transformer Of Ac Current Mutual Module With Precise Miniature Current Transformer.
【Convenience】：Sampling Resistance Of Ac Current Transformer Onload Sampling Resistance To Facilitate The Signal Collection Of Ac Current..
Features
- Features 5A range single-phase AC mutual inductance module The inductance module is equipped with ZMCT103C series high-precision current transformers and high-precision sampling resistors to facilitate the collection of AC current within 5A
- Convenience Sampling resistance of AC current transformer onload sampling resistance to facilitate the signal collection of AC current.
- Analog current output the module can measure the AC current within 5A, and corredsponding output is 5A/5mA
- Small size Current transformer of AC current mutual module with precise miniature current transformer
- Original Our electronic components are 100% original manufacturing, please rest assured to buy our products
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Weight: 0.22 pounds
See On Amazon #11
Haosie 1pcs Split Core Current, PZCT-02 Current Sensor, Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter
Asin: B0C6Y5MJNM | Ean: 0628489655124 | UPC: 628489655124
Easy To Use - Built In Input Coil, Small And Lightweight, Easy To Install. When You Fix The Energy Meter, You Don't Need To Cut Off The Power If You Use This Product..
Service Guarantee - If You Have Any Questions, Don't Hesitate To Contact Customer Service, Our Customer Service Will Reply To You Within 24 Hours!.
Mini Size - Ac Current Sensor Is A Mini Split Base Current Transformer, It's The Smallest One Compared To The Similar Products (Output 100Ma). The Diameter Of Inner Hole Is 16Mm, The Accuracy Is 0.5 Grade..
Snap Joint Structure - Using Snap Joint Structure, The Current Sensor Transformer Can Be Fixed To The Cable Directly Through Nylon Tiesgrade, Convenient To Use..
Features
- GOOD PROPERTIES - Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability.
- SNAP JOINT STRUCTURE - Using snap joint structure, the current sensor transformer can be fixed to the cable directly through nylon tiesgrade, convenient to use.
- EASY TO USE - Built in input coil, small and lightweight, easy to install. When you fix the energy meter, you don't need to cut off the power if you use this product.
- MINI SIZE - AC current sensor is a mini split base current transformer, it's the smallest one compared to the similar products (output 100MA). The diameter of inner hole is 16mm, the accuracy is 0.5 grade.
- SERVICE GUARANTEE - If you have any questions, don't hesitate to contact customer service, our customer service will reply to you within 24 hours!
- See more on Amazon...
Brand: Haosie | Manufacturer: Haosie
Dimensions: 0.79 x 3.15 x 2.36 inches
See On Amazon #12
Gikfun DIY 5A Range AC Current Transformer Module for Arduino (Pack of 5pcs) EK1344x5
Asin: B00UT7U982 | Model: LYSB00UT7U982-ELECTRNCS | PartNumber: LYSB00UT7U982-ELECTRNCS | Ean: 0634894431154 | UPC: 634894431154
The Module Can Measure Ac Currents Less Than 5A, The Corresponding Analog Output 5A/5Ma.
80 Ohm Resistor.
Pack Of 5Pcs.
Onboard Precision Micro Current Transformer.
Features
- It's diy kits, need to solder by yourself
- onboard precision micro current transformer
- the module can measure AC currents less than 5A, the corresponding analog output 5A/5mA
- Pack of 5pcs
- 80 Ohm resistor
- See more on Amazon...
Brand: Gikfun | Manufacturer: Esooho
Dimensions: 3.20 x 4.50 x 0.40 inches | Weight: 0.02 Pounds
See On Amazon #13
JANSANE SCT-013-030 30A Non-invasive AC Current Sensor Split-Core Current Transformer
Asin: B07JNDRJQ4 | Ean: 0675663224751 | UPC: 675663224751
Use This 30A Current Sensor To Build Your Own Energy Monitor, Reducing Your Power Usage, Or Use It Build An Over-Current Protection Device For An Ac Load..
Suitable For Lighting Equipment, Ac Motors, Air Compressors, Monitoring, Current Measurement And Over-Current Protection..
Input Current: 30A Ac; Length Of Leading Wire: 1M; Two Form Of Output: Current Output Or Voltage Output (Burden Resistor Needed To Add); Cable Jack: 3.5Mm (Like A Headphone Jack)..
This Split Core Current Transformer Is Particularly Suitable For Diy Use And It Works Well With Arduino And Raspberry Pi..
Features
- This SCT-013-030 ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation.
- This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi.
- Use this 30a current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load.
- Input Current: 30a AC; Length of Leading Wire: 1m; Two Form of Output: current output or voltage output (burden resistor needed to add); Cable Jack: 3.5mm (like a headphone jack).
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement and over-current protection.
- See more on Amazon...
Brand: JANSANE
See On Amazon #14
Professional Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter
Asin: B07XYRCSHB | Model: Xinwoery46vz1whon | PartNumber: Xinwoery46vz1whon | Ean: 0719855161049 | UPC: 719855161049
Built-In Input Coil; Small And Light, Easy To Install..
Fully Enclosed, Good Mechanical Properties And Environmental Resistance, Strong Voltage Isolation Capability, Safety And Reliability..
This Is A Mini Split Base Current Transformer; It's The Smallest One Compared To The Similar Products (Output 100Ma)..
Using Snap Joint Structure, It Can Be Fixed To The Cable Directly Through Nylon Ties..
Features
- The diameter of inner hole is 16mm, the accuracy is 0.5 grade.
- Using snap joint structure, it can be fixed to the cable directly through nylon ties.
- Built-in input coil; small and light, easy to install.
- This is a mini split base current transformer; it's the smallest one compared to the similar products (output 100MA).
- Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability.
- See more on Amazon...
Brand: Xinwoer | Manufacturer: Xinwoer
Dimensions: 0.79 x 3.15 x 2.36 Inches | Weight: 0.13 pounds
See On Amazon #15
AC Current Sensor Transformer, PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter Used for Energy Meter in Special,Current Sensors
Asin: B085Y8M99H | Model: Cosiki4vpdu20x8b | PartNumber: Cosiki4vpdu20x8b | Ean: 0738680811547 | UPC: 738680811547
【Good Mechanical Properties】Fully Enclosed, Good Mechanical Properties And Environmental Resistance, Strong Voltage Isolation Capability, Safety And Reliability..
【Easy To Use】Built-In Input Coil; Small And Light, Easy To Install.When You Fix The Energy Meter, You Don't Need To Cut Off The Power If You Use This Product..
【Snap Joint Structure】The Diameter Of Inner Hole Is 16Mm, The Accuracy Is 0.5 Grade, Using Snap Joint Structure, It Can Be Fixed To The Cable Directly Through Nylon Ties..
【Professional Use】Current Transducer Used For Energy Meter In Special; Ac 220V, 380V Power Supply Can Both Be Applied..
Features
- Split Base Current Transformer This is a mini split base current transformer; It's the smallest one compared to the similar products (output 100MA).Current Transformer.
- Professional Use Current transducer used for energy meter in special; AC 220v, 380v power supply can both be applied.
- Good Mechanical Properties Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability.
- Snap Joint Structure The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties.
- Easy to Use Built-in input coil; small and light, easy to install.When you fix the energy meter, you don't need to cut off the power if you use this product.
- See more on Amazon...
Brand: Cosiki
Dimensions: 0.79 x 3.15 x 2.36 inches | Weight: 0.13 pounds
See On Amazon #16
SazkJere 2Pcs SCT-013-000 100A 50mA Non-invasive Split Core Current Transformer Sensor SCT013
Asin: B0BCJY5LKJ | Model: SJ45 | PartNumber: SJ45
★Input Current: 0~100A Ac, Voltage: 0~50Ma..
★Applications For Ac Motors, Lighting Equipment, Air Compressors And Other Current ,Monitoring And Protection..
★This Split Core Current Transformer Is Particularly Suitable For Diy Use And It Compatible With Arduino And Raspberry Pi..
★The Standard Φ3.5 Three-Core Plug Output, The Current And Voltage Two Kinds Of Output. Hanging Installation, Lead Output..
Features
- Split-Core Current Transformer Size: 56*32*21mm, Weight: 72g, Leading Wire in Length: About 1m.
- The standard 3.5 three-core plug output, the current and voltage two kinds of output. Hanging installation, lead output.
- Input Current: 0~100A AC, Voltage: 0~50mA.
- This split core current transformer is particularly suitable for DIY use and it compatible with arduino and raspberry pi.
- Applications for AC motors, lighting equipment, air compressors and other current ,monitoring and protection.
- See more on Amazon...
Brand: SazkJere | Manufacturer: SazkJere
See On Amazon #17
Current Transformer ZCZQC Blue SCT-013 0-100A Non-invasive AC Current Sensor Split-Core Clamp Open-Close Current Transformer
Asin: B0B56GSK8N | Model: NICSSCC-BU1 | PartNumber: NICSSCC-BU1 | Ean: 0740866408854 | UPC: 740866408854
Wide Range Of Applications: Suitable For Lighting Equipment, Ac Motors, Air Compressors, Monitoring, Current Measurement And Overcurrent Protection..
Package Includes: 1 X Non-Invasive Ac Current Sensor..
Simple Design: Exquisite And Compact, Simple And Atmospheric, Smooth Surface, Translucent And Beautiful, Beautiful Workmanship, Every Detail Is Clearly Visible..
Lead Wire Length: 1M; Two Output Forms: Current Output Or Voltage Output (Need To Add Load Resistance); Cable Jack: 3.5 Mm (Such As Headphone Jack)..
Features
- Material: Ferrite, Current: 0~100A AC.
- Lead wire length: 1m; two output forms: current output or voltage output (need to add load resistance); cable jack: 3.5 mm (such as headphone jack).
- Wide range of applications: suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement and overcurrent protection.
- Simple design: exquisite and compact, simple and atmospheric, smooth surface, translucent and beautiful, beautiful workmanship, every detail is clearly visible.
- Package includes: 1 x Non-invasive AC Current Sensor.
- See more on Amazon...
Brand: ZCZQC | Manufacturer: ZCZQC
See On Amazon #18
DKARDU SCT-013-000 Non-invasive Split Core Current Transformer 100A/1V AC Current Sensor + ADS1115 ADC Module with Audio Female Cable Male and Female Dupont Cable,for Arduino
Asin: B0CD2F31QR | Model: JK-US-682 | PartNumber: JK-US-682
【Specification】：Input Current: 0~100A Ac,Voltage: 1V.;Length Of Leading Wire: 1M;Two Form Of Output: Current Output Or Voltage Output (Burden Resistor Needed To Add);Cable Jack: 3.5Mm (Like A Headphone Jack)..
【Application Scenario】：Used For Current Measurement, Monitoring And Protection Of Ac Motors, Lighting Equipment, Air Compressors, Etc..
【Wide Applicability】: This Split Current Transformer Is Especially Suitable For Diy Use And Is Compatible With For Arduino And For Raspberry Pi..
【Safety Index】：Dielectric Strength (Between Shell And Output) 6000V Ac/1Min Flame Retardant Characteristics Meet Ul94-V0..
Features
- What it does : Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load.
- Safety index Dielectric strength (between shell and output) 6000V AC/1min Flame retardant characteristics meet UL94-V0.
- Specification Input Current: 0~100A AC,Voltage: 1V.;Length of Leading Wire: 1m;Two Form of Output: current output or voltage output (burden resistor needed to add);Cable Jack: 3.5mm (like a headphone jack).
- Wide Applicability : This split current transformer is especially suitable for DIY use and is compatible with for arduino and for raspberry pi.
- Application scenario Used for current measurement, monitoring and protection of AC motors, lighting equipment, air compressors, etc.
- See more on Amazon...
Brand: DKARDU | Manufacturer: DKARDU
See On Amazon #19
GDCMDZ Split core Current Transformer AC Current Sensor CT Sensor Coil Sensor Clamp on CT (SCT013 50A/1V)
Asin: B0CPY8F42X | Model: 50A/1V | PartNumber: 50A/1V | Ean: 0718387495172 | UPC: 718387495172
Accuracy :±1%.
Opening Opening Size:0.51*0.51Inch.
Fequency:50Hz～1Khz.
Rated Output:0～1V.
Features
- Rated input: 1A 50A
- Rated output:0 1V
- Accuracy : 1%
- Fequency:50Hz 1KHz
- Opening Opening Size:0.51*0.51inch
- See more on Amazon...
Brand: GDCMDZ | Manufacturer: GDCMDZ
Dimensions: 0.87 x 1.53 x 2.24 inches
See On Amazon #20
CR Magnetics CR2RL-1250 Current Transformer, Commercial Class, 5 Amp, 125:5 Secondary Ratio, UL Recognized, 1% Accuracy at 60 Hz, 1.13" Window Diameter
Asin: B005CWHPTK | Model: CR2RL-1250 | PartNumber: CR2RL-1250
24" Ul 1015 #16 Awg 24" Wire Leads.
Made In The Usa.
Core Secured With Epoxy Resin.
Frequency Range 50 - 400 Hz.
Features
- 5 Amp Secondary Standard / Custom Outputs Available
- Frequency Range 50 - 400 Hz
- 24 UL 1015 #16 AWG 24 Wire Leads
- Core Secured with Epoxy Resin
- Made in the USA
- See more on Amazon...
Brand: CR Magnetics | Manufacturer: CR Magnetics Inc
See On Amazon
Looking For Something Else?
Search