BIGTREETECH CAN Adapter V1.0 Module Expainsion Module 3D Printer Parts for BTT PI V1.2 Control Board CAN Bus Function
Asin: B0C4NX5YGH | Model: U2C Module V1.0 | PartNumber: U2C Module V1.0
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.✅The Surface Of The Pcb Adopts The Enig Process..
✅Pop A Specially Designed U2c Module Onto The Board To Enable The Dedicated Can Bus Port,Notes: Using The Usb2 Interface Of Soc For Communication.
✅Support Firmware Update For The Motherboard Through Swd Or Hardware Dfu..
✅The Type-C Port Is Equipped With Esd Protection To Prevent Static Electricity From Damaging The Hardware..
Features
- BIGTREETECH CAN Adapter V1.0 module is Design for BIGTREETECH PI V1.2 control board,Support CAN bus connection, long data transmission, strong anti-noise ability, strong real-time performance and high reliability.
- The TYPE-C port is equipped with ESD protection to prevent static electricity from damaging the hardware.
- The surface of the PCB adopts the ENIG process.
- Support firmware update for the motherboard through SWD or hardware DFU.
- Pop a specially designed U2C module onto the board to enable the dedicated CAN Bus port,Notes: Using the USB2 interface of SOC for communication
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.03 x 1.60 x 0.50 inches
See On Amazon Similar To BIGTREETECH CAN Adapter V1.0 Module
#1
BIGTREETECH Pi V1.2 Control Board Quad-Core WiFi 1GB RAM, BTT Pi Support SKR Mini E3 V3.0 Octopus/Pro/Max EZ Kraken SKR Pico Silent Board to Run Klipper VS Raspberry-Pi 4/3B for i3/CoreXY 3D Printer
Asin: B0C2KMT8V7
⭐Bigtreetech Pi Is Equipped With Quad Core 64 Bit Arm Cortex-A53 @ 1.5Ghz Processor, 1Gb Ddr3 Memory Chip, With Powerful Performance..
⭐Enhance Diy Performance: Reserve Spi Port, Adxl345 Port, Usb To Can Module(Need To Purchase U2c Module). Built-In Ir Receiver..
⭐The Core Board Reserves Hdmi2.0A Display Interface To Support 4K Display; Onboard 4-Way Usb2.0 Port; 40-Pin Gpio; 3.5Mm Audio Interface..
⭐Bigtreetech Pi Has Onboard 100M Ethernet Interface And Supports Wifi Transmission..
Features
- The GPU of BIGTREETECH Pi V1.2 is Mali G31 MP2, which supports OpenGL3.2.
- BIGTREETECH Pi has onboard 100M Ethernet interface and supports WIFI transmission.
- BIGTREETECH Pi is equipped with quad core 64 bit ARM Cortex-A53 @ 1.5GHz processor, 1GB DDR3 memory chip, with powerful performance.
- The core board reserves HDMI2.0A display interface to support 4K display; onboard 4-way USB2.0 port; 40-pin GPIO; 3.5mm audio interface.
- Enhance DIY performance: Reserve SPI port, ADXL345 port, USB To CAN module(need to purchase U2C module). Built-in IR Receiver.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #2
BIGTREETECH EBB SB2209 CAN with Pre-Crimped 30-Pin Wire NTC 100K Thermistor for Voron StealthBurner 3D Printer Parts Hotend Klipper CanBus Extruder HeadTool Max31865 Adapter Board
Asin: B0BXRW6Z6V
🐬For Voron Stealthburner : Drop-In Installation, Careful Header Spacing And Location Means That Wiring Will Be A Breeze. No Need To Solder Anything Thanks To The Onboard Header Pins. Onboard Max31865, Print Hot And Accurately With A Pt100 Or Pt1000 Temperature Probe. Configuration Is Simple Using A Dip Switch. Built-In Adxl345,Allows You To Use The Input Shaping Function For Perfect Printing.
🐬30-Pin Wire+Thermistor: Due To The High Density Of Components On The Ebb Sb2209 Boards, Xh1.25 Connectors Have Been Used. The Crimping Process For These Can Be Challenging Which Is Why The Kit Which Includes A Pre-Crimped 30-Pin Wire And A Pre-Crimped Ntc 100K Thermistor. This Will Significantly Simplify The Wiring Process For You..
🐬One More Thing: Add A Secondary Screen To The Front Cover Of The Extruder. Make Your Machine Stand Out Of The Crowd. 2 X 2 Pins Fan Ports, 1 X 4 Pins Fan Port, 5/12/24V Selection. Spi-Out Interface Is Reserved, The Installation Position Of The Module Is More Flexible To Meet More Diy Usage Scenarios. More Bed Leveling Options, Supports Microprobe, Bltouch, Proximity Switch.
🐬Ultra-Silent Driver Chip: Sb2209 Can Onboard Silent Driver Tmc2209, Uart Working Mode, Has Overheating Protection Function, And Helps Print Smoothly And Accurately Without Losing Steps And Rough Printing..
Features
- Robust & Reliable & Convenient : Using high-performance, 32-bit, 64 MHz MCUs STM32G0B1CBT6 from the industry leading STM ensures rock solid performance with CAN bus signaling that can support higher data rates over longer distances without errors. The XT30 communication interface supports a maximum current of 10A, which is safer to use; with a 3m CAN Bus wire, which is easy to use and saves steps such as crimping terminals with crimping pliers.Put your cable management nightmares behind you!
- Ultra-Silent Driver Chip: SB2209 CAN onboard silent driver TMC2209, UART working mode, has overheating protection function, and helps print smoothly and accurately without losing steps and rough printing.
- For VORON StealthBurner : Drop-in Installation, Careful header spacing and location means that wiring will be a breeze. No need to solder anything thanks to the onboard header pins. onboard MAX31865, Print hot and accurately with a PT100 or PT1000 temperature probe. Configuration is simple using a DIP switch. built-in ADXL345,allows you to use the input shaping function for perfect printing
- One More Thing: Add a secondary screen to the front cover of the extruder. Make your machine stand out of the crowd. 2 x 2 pins Fan Ports, 1 x 4 pins Fan Port, 5/12/24V Selection. SPI-Out interface is reserved, the installation position of the module is more flexible to meet more DIY usage scenarios. more bed leveling options, supports microprobe, BLTouch, proximity switch
- 30-pin Wire+Thermistor: Due to the high density of components on the EBB SB2209 boards, XH1.25 connectors have been used. The crimping process for these can be challenging which is why the kit which includes a pre-crimped 30-pin wire and a pre-crimped NTC 100K thermistor. This will significantly simplify the wiring process for you.
- See more on Amazon...
Brand: BIQU | Manufacturer: Octobigtree
See On Amazon #3
BIGTREETECH Pi V1.2 Control board 64bit Quad Core 1GB DDR3L 40-pin GPIO Compatible with SKR MINI E3 V3.0 Octopus/SKR V1.4 turbo to run Klipper/Linux/Debain For I3/CoreXY 3D Printer
Asin: B0C46B6X64 | Model: PI V1.2 | PartNumber: PI V1.2
【Support Display And Motherboard】Btt Pi V1.2 Core Board Display Adopts Malig32 Mp2 Gpu, Support Opengl3.2 And Hdmi2.0A Uhd 4K Video & Audio Output And Spi Screen（Btt Hdmi5/7, Tft35 Spi), Onboard 4Xusb2.0 Port. Powerful High Performance Details And Clarity. Motherboard Support Skr Mini E3 V3.0, Skr Pico, Skr V1.4 Turbo, Skr 3, Kraken, Octopus Pro/Octopus V1.1 Series. Then Running Klipper Firmware..
【Flexible Power】Support Usb-C 5V Power Supply And Dc12v-24V From A 3D Printer, Making It Easy And Efficient To Power Up The Board Without Any Extra Adapters Or Power Soucres..
【Rich Connectivity】Onboard Standard 40-Pingpio Header, 3.5Mm Audio Jack, Tf Card Slot, Adxl345 Spi, Usb To Can Module(Requires Can Adapter V1.0 Module). Built-In Ir Receiver. Rj45 Port Support A 100Mbps Wired Network, Built-In 2.4G Wifi Module, Supports 100Mbps Wireless Network, Users Can Connect The Inlculde Wifi Antenna To Get A Stronger And More Stable Wifi Signa..
【About Size】Btt Pi V1.2 Control Board Size Is 85*56Mm, The Same As The Raspberry-Pi 3B/4B, Making It A Seamless Fit For Your Existing Projects..
Features
- Main Control Chip BIGTREETECH BTT Pi v1.2 board adopts ALLWINNER H616, 64-bit Quad-core, Cortex-A53@1.5GHz Processor, RAM is 1GB DDR3L SDRAM.
- About Size BTT Pi v1.2 control board size is 85*56mm, the same as the Raspberry-Pi 3B/4B, Making it a seamless fit for your existing projects.
- Support Display and Motherboard BTT Pi v1.2 core board display adopts MaliG32 MP2 GPU, support OpenGL3.2 and HDMI2.0A UHD 4K Video & Audio output and SPI screen BTT HDMI5/7, TFT35 SPI), onboard 4xUSB2.0 port. Powerful high performance details and clarity. Motherboard support skr mini e3 v3.0, skr pico, skr v1.4 turbo, skr 3, Kraken, Octopus pro/Octopus V1.1 series. then running Klipper firmware.
- Rich Connectivity Onboard standard 40-pinGPIO header, 3.5mm audio jack, TF card slot, adxl345 spi, USB to CAN module(requires CAN adapter V1.0 module). Built-in IR receiver. RJ45 port support a 100Mbps wired network, built-in 2.4G Wifi module, supports 100Mbps wireless network, users can connect the inlculde wifi antenna to get a stronger and more stable Wifi signa.
- Flexible Power Support USB-C 5V power supply and DC12V-24V from a 3D Printer, making it easy and efficient to power up the board without any extra adapters or power soucres.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.39 x 3.30 x 2.20 inches
See On Amazon #4
BIGTREETECH EZ2209 V1.0 Stepper Motor Driver, 5pcs Stepstick Mute EZ2209 with Stepper Driver Adapter Compatible with SKR 3/SKR V1.4 Turbo/Octopus 3D Printer Controller Main Boards 5 PCS
Asin: B0B1NWVFYY
ꕥ【A Breeze To Install】 Ez2209 Is An Upgraded Pinless Structure Stepper Driver Which Protect You From Finger Prick, You Can Enjoy Easy One-Way Installation Due To The Marvelous Anti-Misplugging Design, It Means That The Drives Can Only Be Inserted In The Correct Orientation. Tip: Please Remember That If You Are Gonna Put In Other Board (Except Skr 3 Ez), It Is Necessary To Use Stepper Driver Adapter Together..
ꕥ【High Durability】 It Is Equipped With 4 Layer Of Pcb Of Superior Performance. Compare To The Old-Style Driver, Ez2209 V1.0 Stepper Driver Gives You A Long Service Life Even Being Used For A Long Time, Built In Last. We Offer Long-Term After-Sales Guaranteed Time For 12 Months, If You Have Difficulties In Using Our Step Driver Or Other Questions, Please Let Me Know What Help You Need, We Are Here Ready To Support You..
ꕥ【Ultra Silent Step Driver】 Ez2209 Stepper Motor Driver Adopts Stealthchop2 Mute Technology Which Reduces Motor Noise To The Point Of Silence At Low Velocities To Ensures Noiseless Operation, Maximum Efficiency And Best Motor Torque..
ꕥ【Better Heat Dissipation】It Is Definitely A Innovative 2 In 1 Stepper Driver & Heat Sink Combines, Ez2209 Stepper Driver Adopt New Large Aluminum Heatsink Instead Of Using Small Pieces Heatsink To Enhance The Heat Dissipation Capacity, Keeps Heat Output And Energy Consumption To A Minimum As Well Protect The Driver Chip From External Damage..
Features
- Wide Application Size: 18.5*19.8 mm, drive current 1.6, peak current 2A, voltage range12 V- 24 V, 256 subdivision. Bigtreetech EZ2209 stepper motor driver compatible with most 3D printer control board, it is able to use in SKR 3 EZ motherboard directly. Meanwhile, it can well-matched for I3 Mega, Octopus V1.2, SKR 3 and other popular main boards by using stepper driver adapter.
- Better heat dissipation It is definitely a innovative 2 in 1 stepper driver & heat sink combines, EZ2209 stepper driver adopt new large aluminum heatsink instead of using small pieces heatsink to enhance the heat dissipation capacity, keeps heat output and energy consumption to a minimum as well protect the driver chip from external damage.
- A Breeze to Install EZ2209 is an upgraded pinless structure stepper driver which protect you from finger prick, you can enjoy easy one-way installation due to the marvelous anti-misplugging design, it means that the drives can only be inserted in the correct orientation. Tip: please remember that if you are gonna put in other board (except SKR 3 EZ), it is necessary to use stepper driver adapter together.
- Ultra Silent Step Driver EZ2209 stepper motor driver adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque.
- High Durability It is equipped with 4 layer of PCB of superior performance. Compare to the old-style driver, EZ2209 V1.0 stepper driver gives you a long service life even being used for a long time, built in last. We offer long-term after-sales guaranteed time for 12 months, If you have difficulties in using our step driver or other questions, please let me know what help you need, we are here ready to support you.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #5
BIGTREETECH CAN Adapter V1.0 Expansion Module Board for BTT Pi Support CAN Bus
Asin: B0C42TZ56H
Type-C Interface Esd Protection To Prevent Static Electricity From Damaging The Hardware..
Pop A Specially Designed Can Adapter Module Onto The Board To Enable The Dedicated Can Bus Port..
The Pcb Surface Of The Can Adapter Module Board Adopts Immersion Metal Work, And The Quality Is More Premium..
Bigtreetech Can Adapter Module Perfect Fit For Bigtreetech Pi V1.2 To Support Can Bus..
Features
- Uses 32-bit ARM Cortex-M0+ series STM32G0B1CBT6 main control chip.
- BIGTREETECH CAN Adapter Module Perfect fit for BIGTREETECH Pi V1.2 to support CAN Bus.
- TYPE-C interface ESD protection to prevent static electricity from damaging the hardware.
- The PCB surface of the CAN adapter module board adopts immersion metal work, and the quality is more premium.
- Pop a specially designed CAN adapter module onto the board to enable the dedicated CAN Bus port.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #6
BIGTREETECH Pi4B Adapter V1.0 Carrier Control Board Support CM4 or CB1, with SKR Mini E3 V3.0 Octopus V1.1 Octopus Pro Control Board to Run Klipper VS Raspberry-Pi 4/3B for Voron 3D Printer
Asin: B0BLN9Y8HG | Model: KINGPRINT-1030000103 | PartNumber: KINGPRINT-1030000103
⭐Equipped With Esd Protection At The Usb And Network Interfaces; 40 Pin Double-Row Pin Header With The Same Function As Raspberry Pi..
⭐A 5V Power Interface Is Reserved, Which Can Be Connected To A 5V Fan For Cm4 Heat Dissipation..
⭐Adopting Type-C Interface, Which Can Be Used To Write Cm4 With Emmc, And Can Supply Power To The Whole System At The Same Time..
⭐Designed With Gigabit Ethernet Interface, Hdmi0 Interface, Hdmi1 Interface, Cam Interface, Csi Interface..
Features
- Use Raspberry Pi 4B board outline, the same mounting hole dia; Support various versions of CM4 modules.
- Designed with Gigabit Ethernet interface, HDMI0 interface, HDMI1 interface, CAM interface, CSI interface.
- Equipped with ESD protection at the USB and network interfaces; 40 pin double-row pin header with the same function as Raspberry Pi.
- Adopting Type-C interface, which can be used to write CM4 with eMMC, and can supply power to the whole system at the same time.
- A 5V power interface is reserved, which can be connected to a 5V fan for CM4 heat dissipation.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #7
BIGTREETECH RJ11 to CAN Cable Adapter Wire CX-0157-S 6P6C to XH2.54-2Pin 1.5m for Octopus V1.1, Octopus Pro F446/f429 Control Board CAN
Asin: B0D2HV57MB | Model: USA6-3040020516 | PartNumber: USA6-3040020516
Bigtreetech Rj11 To Can Cable Helps You Easily Connect The Can Cable To The Rj11 Interface On Octopus V1.1, Octopus Pro F446, Octopus Pro F429 Control Board And Connect The Bigtreetech Ceb V1.0 Can Adapter Module..
If Have Any Question, Please Contact With Us On Amazon, We Will Help You Solve It..
Btt Rj11 Can Cable Adapter Wire Cx-0157-S 6P6c To Xh2.54-2Pin..
Features
- BIGTREETECH RJ11 Cable Length is 1.5M.
- BTT RJ11 CAN cable adapter wire CX-0157-S 6P6C to XH2.54-2Pin.
- BIGTREETECH RJ11 to CAN cable helps you easily connect the CAN cable to the RJ11 interface on Octopus v1.1, Octopus pro f446, Octopus pro f429 control board and connect the BIGTREETECH CEB V1.0 CAN adapter module.
- If have any question, please contact with us on Amazon, we will help you solve it.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon #8
BIGTREETECH Octopus Pro V1.0.1 F429 Control Board 180MHz 1MB Support 8 Axis TMC5160T Pro TMC2209 Driver BTT PI Running Klipper/Marlin/RRF High Speed/Voltage Printing for CoreXY Voron 3D Printer
Asin: B09HC27WS2 | Model: US6-ZZB000585 | PartNumber: US6-ZZB000585
🐙【8 High Voltage Drivers】Btt Octopus Pro V1.0.1 3D Printer Control Board Provides Space For Up To 8 Stepper Drivers On Octopus Pro Controller Board In Step/Dir, Uart Or Spi Mode, Tmc2209/Tmc2208/Tmc5160t Pro Driver, Which Can Control Up To 8 Different Axes. It's Especially Suitable For Multi-Colour Printing And Tool Changer. Added High Voltage (Hv) Drivers Support Input Voltage 12V-Maximum 60V (Only For The Motor Drive Power Supply)..
🐙【Update Firmware Via Dfu】Supports Usb And Dfu Mode Updates. Updating The Firmware Via Dfu Mode And Allows Us To Upload Firmware Or Bootloader In Case The Normal Process Does Not Work When Using A Usb-C Cable. If Have Any Question，Please Contact Us In Time And We Will Provider Satisfactory Solution..
🐙【Widely Compatible】Big Tree Tech Octopus Pro V1.0.1 Motherboard Supports Btt Tft35/43/50/70, Hdmi5 V1.1 Touchscreen Display, Lcd2004 And Lcd12864. Supports Smart Filament Runout Sensor, Shutdown After Printing, Power Loss Print Resume, Ceb V1.0 Can Adapter Board, Sksm V1.0 Sbc Power Protection Module, Microprobe, Bltouch, Eddy Auto Bed Leveling Sensor..
🐙【6 Controllable Fans】Bigtreetech Octopus Pro V1.0.1 F429 Board With Up To 6 Pwm Fans And 2 Always-On Fans With The Ability To Individually Select The Voltage That Will Drive Each Fan. Select From Vin, 12V Or 5V. Supports Up To 4 Hotend Heaters. Flyback Protection On Pwn Fan Ports Are Effectively Against Short Circuits In The Fan Sockets To Prevent Damages On Fans..
Features
- 32-bit Control Chip BIGTREETECH Octopus Pro V1.0.1 control board adopts 32-bit ARM-level Cortex-M4 series STM32F429ZGT6 chip with a frequency of 180MHz and 1MB of flash memory, support Klipper/Marlin/RRF and Raspberry Pi, Octoprint. Compatible with BTT Pi V1.2/Pi2, CB1/CB2+Pi4b adapter.
- 6 Controllable Fans BIGTREETECH Octopus Pro V1.0.1 F429 board with up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage that will drive each fan. Select from Vin, 12V or 5V. Supports up to 4 hotend heaters. Flyback protection on PWN fan ports are effectively against short circuits in the fan sockets to prevent damages on fans.
- 8 High Voltage Drivers BTT Octopus Pro V1.0.1 3D printer control board provides space for up to 8 stepper drivers on Octopus Pro controller board in STEP/DIR, UART or SPI mode, TMC2209/TMC2208/TMC5160T Pro driver, which can control up to 8 different axes. It's especially suitable for multi-colour printing and tool changer. Added high voltage (HV) drivers support input voltage 12V-maximum 60V (only for the motor drive power supply).
- Widely Compatible Big tree tech Octopus Pro V1.0.1 motherboard supports BTT TFT35/43/50/70, HDMI5 V1.1 touchscreen display, LCD2004 and LCD12864. Supports smart filament runout sensor, shutdown after printing, power loss print resume, CEB V1.0 CAN adapter board, SKSM V1.0 SBC Power Protection Module, Microprobe, Bltouch, Eddy auto bed leveling sensor.
- Update firmware via DFU Supports USB and DFU mode updates. Updating the firmware via DFU mode and allows us to upload firmware or bootloader in case the normal process does not work when using a USB-C cable. If have any question please contact us in time and we will provider satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 3.94 x 5.91 x 0.79 inches
See On Amazon #9
BIGTREETECH TMC5160T Plus V1.0 Stepper Motor Driver 8V-60V StepStick SPI Silent High Speed Printing for Marlin/Klipper/RRF Firmware Manta M8P V2.0/V1.0, Octopus Pro Control Board (Without Case)
Asin: B0CHFK7VBL | Model: BIGTREETECH TMC5160T Plus (without Case) | PartNumber: BIGTREETECH TMC5160T Plus (without Case)
On-Board 24V Always-On Fan Interface Facilitates Active Cooling; Esd Protection On The Drive Power, Logic Power, Etc., To Prevent Damage Due To Power Fluctuations And Static Electricity;.
Actual Testing Can Drive Stepper Motors Such As Drive 36, 42, 57, And 86; Can Prevent Motor Jitter And Avoid Losing Steps;.
Supplied With Adapters And Wires For Both Standard Drives And Ez Drive, For User Convenience; Encoder Interface Reserved For Diy Usage;.
Supports A Maximum Voltage Of 60V, A Maximum Effective Current (Irms) Of 10.6A, And A Sine Wave Peak Current Of Up To 15A; Stealthchop Mode And Spreadcycle Mode Selectable, With Standalone Mode, Uart Mode, And Spi Mode Selectable;.
Features
- 8 high-power MOSFETs separately mounted on the motherboard with 100V voltage resistance, 93A current resistance, and equivalent resistance as low as 6m , significantly enhancing the drive's performance;
- Supports a maximum voltage of 60V, a maximum effective current (IRMS) of 10.6A, and a sine wave peak current of up to 15A; StealthChop mode and SpreadCycle mode selectable, with standalone mode, UART mode, and SPI mode selectable;
- On-board 24V always-on fan interface facilitates active cooling; ESD protection on the drive power, logic power, etc., to prevent damage due to power fluctuations and static electricity;
- Supplied with adapters and wires for both standard drives and EZ drive, for user convenience; Encoder interface reserved for DIY usage;
- Actual testing can drive stepper motors such as drive 36, 42, 57, and 86; Can prevent motor jitter and avoid losing steps;
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #10
BIGTREETECH EBB SB2209 CAN + KNOMI V2.0 Touch Screen for Voron Stealthburner 3D Printer Parts Hotend Klipper Canbus Extruder HeadTool Max31865 Adapter Board
Asin: B0CPS795P1
✨New Touch Upgrade: Btt Knomi V2.0 Command Your Print With A Touch, Easily Upgrade Your Voron Stealthburner Into A Dynamic Control Panel.Designed Specifically For Klipper-Based Printers, Full-View Display, Clearly Visibleit, It Can Display Real-Time Status, Allowing You To Understand The Printing Status In Real Time While Smoothly Controlling The 3D Printing Process..
✨Voron Ready: Hassle-Free Installation, Easily Upgrade Your Voron Stealthburner With Knomi Using Our Customized Printed Part Files. The Knomi Is Fully Open Source, Allowing Users To Freely Customize The Personalized Ui Interface. At The Same Time, Bigtreetech Provides Its 3D Model Files To Facilitate Users To Design The Installation Structure For Their Respective 3D Printing Equipment..
✨New Ui Design: Knomi 2 Provides A Customizable Colorful Ui To Create A Personalized Control Interface. It Also Blends Well With The Unique Colors Of Your Voron Printer. New Emoticons For Standby State, Heating State, Leveling State, And Print Preview State Make Your Printing Process Lively And Interesting.The Fuselage Comes With An Accelerometer That Can Measure Acceleration In Real Time. Supports Start Printing Function, And Pop-Up Window Reminder For Abnormal Kipper System.
🐬Ultra-Silent Driver Chip：Ebb Sb2240 Can Onboard A Tmc2240 . Ebb Sb2209 Can Onboard A Tmc2209 .The Tmc2240 Features Abundant Diagnostic And Protection Features, Such As Short/Open Circuit Protection, Thermal Shutdown, And Under-Voltage Lockout. Due To Internal Optimizations, It Can Drive More Current At Lower Temperatures, Keeping Your Extruder Running Harder For Longer..
Features
- Robust & Reliable & Convenient : Using high-performance, 32-bit, 64 MHz MCUs STM32G0B1CBT6 from the industry leading STM ensures rock solid performance with CAN bus signaling that can support higher data rates over longer distances without errors. The XT30 communication interface supports a maximum current of 10A, which is safer to use; with a 3m CAN Bus wire, which is easy to use and saves steps such as crimping terminals with crimping pliers.Put your cable management nightmares behind you!
- Ultra-Silent Driver Chip EBB SB2240 CAN onboard a TMC2240 . EBB SB2209 CAN onboard a TMC2209 .The TMC2240 features abundant diagnostic and protection features, such as short/open circuit protection, thermal shutdown, and under-voltage lockout. Due to internal optimizations, it can drive more current at lower temperatures, keeping your extruder running harder for longer.
- New Touch Upgrade: BTT KNOMI V2.0 Command Your Print with a Touch, easily upgrade your Voron StealthBurner into a dynamic control panel.Designed specifically for Klipper-based printers, full-view display, clearly visibleit, it can display real-time status, allowing you to understand the printing status in real time while smoothly controlling the 3D printing process.
- New UI Design: KNOMI 2 provides a customizable colorful UI to create a personalized control interface. It also blends well with the unique colors of your Voron printer. New emoticons for standby state, heating state, leveling state, and print preview state make your printing process lively and interesting.The fuselage comes with an accelerometer that can measure acceleration in real time. supports start printing function, and pop-up window reminder for abnormal kipper system
- VORON Ready: Hassle-Free Installation, easily upgrade your VORON StealthBurner with KNOMI using our customized printed part files. The knomi is fully open source, allowing users to freely customize the personalized UI interface. At the same time, BIGTREETECH provides its 3D model files to facilitate users to design the installation structure for their respective 3D printing equipment.
- See more on Amazon...
Brand: BIQU
See On Amazon
Looking For Something Else?
Search