ESP32 Terminal 3.5 inch Touchscreen Monitor Parallel TFT LCD capacitive Touch Display (RGB by chip ILI9488) ESP32 Development Board for LVGL
Asin: B0C4SJXP9N
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Esp32 Touchscreen Supports Esp-Idf And Ar Duino Ide Development And Is Compatible With Python/Micropython/Ar Duino. It Also Support Lvgl, Which Is The Most Popular Free And Open-Source Embedded Graphics Library To Create Beautiful Uis For Any Mcu, Mpu And Display Type..
This Esp32 Development Board With 3.5 Inch Touch Screen Kit Uses An Acrylic Shell, Which Can Not Only Protects The Screen, But Also Makes It More Beautiful. Pocket Size, Small And Portable; Two M3 Fixing Holes Are Easy To Fix, Making It Easier For You To Set Up Your Project..
The Onboard Charging Circuit And Lithiumbattery Interface Can Use The Type-C Power Supply Interface To Supply Power And Charge The External Power At The Same Time, Providing More Outdoor Scene Expansion Possibilities..
This Esp32 Module Has A 3.5 Inch Parallel Rgb Interface Capacitive Touch Screen With A Resolution Of 320*480 To Ensure Perfect Image Output At A Frame Rate (Fps) Of 60. 4 Crowtail Interfaces On The Back, Which Can Be Used With Elecrow Crowtail Series Sensors, Plug And Play, And Create More Interesting Projects Quickly And Conveniently. Equipped With An Sd Card Slot For Extended Storage (Spi Leads) And A Buzzer Function..
Features
- This ELECROW ESP32 terminal a microcontroller based on the ESP32 master. It adopts Xtensa 32-bit LX7 dual-core processor with a main frequency of up to 240Mhz, and can easily handle common edge terminal device application scenarios, such as industrial control, agricultural production environment detection and processing, intelligent logistics monitoring, smart home assistant and more.
- This ESP32 module has a 3.5 inch parallel RGB interface capacitive touch screen with a resolution of 320*480 to ensure perfect image output at a frame rate (FPS) of 60. 4 Crowtail interfaces on the back, which can be used with ELECROW Crowtail series sensors, plug and play, and create more interesting projects quickly and conveniently. Equipped with an SD card slot for extended storage (SPI leads) and a buzzer function.
- This ESP32 touchscreen supports ESP-IDF and Ar duino IDE development and is compatible with Python/Micropython/Ar duino. It also support LVGL, which is the most popular free and open-source embedded graphics library to create beautiful UIs for any MCU, MPU and display type.
- The onboard charging circuit and lithiumbattery interface can use the type-c power supply interface to supply power and charge the external power at the same time, providing more outdoor scene expansion possibilities.
- This ESP32 development board with 3.5 inch touch screen kit uses an acrylic shell, which can not only protects the screen, but also makes it more beautiful. Pocket size, small and portable; two M3 fixing holes are easy to fix, making it easier for you to set up your project.
- See more on Amazon...
Brand: ELECROW | Manufacturer: ELECROW
Warranty: 1 YEAR
See On Amazon Similar To ESP32 Terminal 3.5 inch Touchscreen
#1
ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA Compatible with Arduino IDE (3PCS)
Asin: B08D5ZD528 | Model: 15363 | PartNumber: 15363
Supportthree Modes: Ap, Sta, And Ap+Sta.
Esp32 Is A Safe, Reliable, And Scalable To A Variety Of Applications.
Ultra-Low Power Consumption, Compatible With Arduino Ide.
Support Lwip Protocol, Freertos.
Features
- 2.4GHz Dual Mode WiFi + Bluetooth Development Board
- Support LWIP protocol, Freertos
- SupportThree Modes: AP, STA, and AP+STA
- Ultra-Low power consumption, Compatible with Arduino IDE
- ESP32 is a safe, reliable, and scalable to a variety of applications
- See more on Amazon...
Brand: AITRIP | Manufacturer: AiTrip
Dimensions: 0.59 x 2.05 x 1.18 inches
See On Amazon #2
HiLetgo ESP-WROOM-32 ESP32 ESP-32D Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE
Asin: B0718T232Z | Model: 3-01-1287 | PartNumber: 3-01-1287
Support Lwip Protocol, Freertos.
Esp32 Is A Safe, Reliable, And Scalable To A Variety Of Applications.
Supportthree Modes: Ap, Sta, And Ap+Sta.
Ultra-Low Power Consumption, Works Perfectly With The Arduino Ide.
Features
- 2.4GHz Dual Mode WiFi + Bluetooth Development Board
- Ultra-Low power consumption, works perfectly with the Arduino IDE
- Support LWIP protocol, Freertos
- SupportThree Modes: AP, STA, and AP+STA
- ESP32 is a safe, reliable, and scalable to a variety of applications
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
Teyleten Robot ESP32S ESP32 ESP-WROOM-32 Development Board 2.4GHz Dual-Core WiFi +Bluetooth 2 Function Microcontroller for Arduino (ESP32 30P, 3PCS)
Asin: B08246MCL5 | Model: A9 | PartNumber: A9 | Ean: 8711393446796
2. The Best Power And Rf Characteristics Are Safe, Reliable And Scalable For Various Applications..
9. 38P And 30P Board Sizes And Circuit Layouts Are Different..
6.The Maximum Operating Voltage Of The Esp32 Is 3.3V. The Esp32 Has An On-Board Voltage Regulator That Can Withstand Voltages Up To 5V Using The Vin And Gnd Pins. Once A Voltage Is Input To The Esp32 Development Board's Vin Pin, That Voltage Is Passed Through The Esp32's On-Board Voltage Regulator (Ams1117), Which Outputs A Constant 3.3V, Which Is The Board's Operating Voltage. Note: The Maximum Operating Voltage Of The Esp32 Is 3.3V. The Maximum Voltage That Can Be Applied To The Esp32 Development Board From The Vin Pin Is 5V.Usb Power Supply Is 5V..
7.You Need To Driver The Cp2102 Before You Can Start Using It.
4. Compact And Portable: Being So Mini And Light-Weight, This Product Does Not Take Much Space And Can Be Easily Taken Away..
5.For Arduino Ide,Choose Esp32 Dev,Make Sure That Your Program Or Run A Program Smaller Than The Esp32 Configuration.
3. Meticulous Workmanship: The Meticulous Design, Perfect In Workmanship, Durable And Long Service Life..
8. Durable Material: This Product Is Made Of High-Quality Material, Durable, Long Service Time, Firm And Stable In Use..
1. The Complete Solution Takes Up The Least Printed Circuit Board Area. This Board Is Used With 2.4Ghz Dual-Mode Wifi And Wireless Chips Using 40Nm Tsmc Low-Power Technology..
Features
- If you think you have received the wrong product, please contact us and give us a chance to correct it,We also have tech support, just contact us on Amazon,thank you.
- 1. The complete solution takes up the least printed circuit board area. This board is used with 2.4GHz dual-mode WiFi and wireless chips using 40nm TSMC low-power technology.
- 2. The best power and RF characteristics are safe, reliable and scalable for various applications.
- 3. Meticulous workmanship: The meticulous design, perfect in workmanship, durable and long service life.
- 4. Compact and portable: being so mini and light-weight, this product does not take much space and can be easily taken away.
- 5.For Arduino IDE,choose ESP32 DEV,make sure that your program or run a program smaller than the ESP32 configuration
- 6.The maximum operating voltage of the ESP32 is 3.3V. The ESP32 has an on-board voltage regulator that can withstand voltages up to 5V using the VIN and GND pins. Once a voltage is input to the ESP32 development board's VIN pin, that voltage is passed through the ESP32's on-board voltage regulator (AMS1117), which outputs a constant 3.3V, which is the board's operating voltage. Note: The maximum operating voltage of the ESP32 is 3.3V. The maximum voltage that can be applied to the ESP32 Development Board from the VIN pin is 5V.USB power supply is 5V.
- 7.you need to driver the CP2102 before you can start using it
- 8. Durable material: This product is made of high-quality material, durable, long service time, firm and stable in use.
- 9. 38P and 30P board sizes and circuit layouts are different.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.48 x 2.03 x 1.12 inches
See On Amazon #4
HiLetgo 3pcs ESP32 ESP-32D ESP-WROOM-32 CP2012 USB C 38 Pin WiFi+Bluetooth Dual Core Type-C Interface ESP32-DevKitC-32 Development Board Module STA/AP/STA+AP
Asin: B0CNYK7WT2 | Model: 3-01-1842 | PartNumber: 3-01-1842
Support Many Kinds Of Interfaces Such As Uart/Spi/I2c/Pwm/Dac/Adc..
With 2.4Ghz Wifi+Bluetooth Dual-Mode, Support Sta/Ap/Sta+Ap Mode, Universal At Command, Easy To Use..
Esp32 Integrates Antenna, Switches, Rf Balun, Power Amplifiers, Low Noise Amplifiers, Filters And Power Management Modules..
Features
- ESP32 CP2012 USB C (Type-C) core board, it has 38 pins and more features than a 30-pin module. Narrower width, can be connected to the breadboard very well.
- ESP32 integrates antenna, switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
- Support many kinds of interfaces such as UART/SPI/I2C/PWM/DAC/ADC.
- With 2.4GHz WiFi+Bluetooth Dual-mode, support STA/AP/STA+AP mode, universal AT command, easy to use.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #5
Seeed Studio XIAO ESP32C3(Support Arduino) - Tiny MCU Board for IoT Controlling Scenarios, Wi-Fi, BLE, Battery Charge, and Rich Interface for Tiny Machine Learning
Asin: B0B94JZ2YF
🌱【Thumb-Size Design】 21 X 17.5Mm Overall Dimension, Portable And Lightweight..
🌱【Onboard Battery Charge Ic】 Supports Battery Charging, Great For Various Wearable Scenarios And Wireless Iot Applications..
🌱【Low Power Consumption】 Lowest As 44 Μa (Deep Sleep Mode), With 4 Working Modes Available..
🌱【Rich Interface】 There Are 11 Digital I/O That Can Be Used As Pwm Pins And 4 Analog I/O That Can Be Used As Adc Pins. It Supports Uart, Iic, And Spi Serial Communication Ports, Also Including Iis (Internet Information Services)..
Features
- Outstanding RF performance Powerful ESP32-C3 SoC and U.FL antenna provided that supports WiFi/Bluetooth connection over 100m.
- Rich Interface There are 11 digital I/O that can be used as PWM pins and 4 analog i/o that can be used as ADC pins. It supports UART, IIC, and SPI serial communication ports, also including IIS (Internet Information Services).
- Thumb-size Design 21 x 17.5mm overall dimension, portable and lightweight.
- Low power consumption Lowest as 44 A (deep sleep mode), with 4 working modes available.
- Onboard battery charge IC Supports battery charging, great for various wearable scenarios and wireless IoT applications.
- See more on Amazon...
Brand: seeed studio | Manufacturer: seeed studio
Dimensions: 1.18 x 1.97 x 1.57 inches
See On Amazon #6
HiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module Works Great for Arduino IDE/Micropython (Large)
Asin: B081CSJV2V
Data Download Access To The Website: Http://Www;Nodemcu;Com.
Arduino Compatible, Works Great With The Latest Arduino Ide/Mongoose Iot/Micropython.
Features
- Built-in Micro-USB, with flash and reset switches, easy to program
- Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython
- Data download access to the website: http://www;nodemcu;com
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
Freenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM, Terminal Block Shield with Pin Header, 5V 3.3V Power Outputs, GPIO Status LED
Asin: B0CD2512JV | Model: FNK0091 | PartNumber: FNK0091
Independent Led -> The Status Led Is Driven By The Chip Instead Of The Gpio So The Gpio Will Not Be Affected..
Terminal Block And Header -> Connect To All Gpio Headers Of Raspberry Pi Pico, 2.54Mm / 0.1In Pitch..
Power Circuit -> Provide Multiple 5V And 3.3V Power Outputs. (5V Output Up To 3A With External Power Supply.).
Gpio Status Led -> Led On If Gpio Outputs/Inputs High Level, Led Off If Gpio Outputs/Inputs Low Level..
Features
- Compatible models -> Freenove ESP32 / ESP32-S3 series. (Note: Boards from other brands are not compatible due to different pinout.)
- GPIO status LED -> LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs low level.
- Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected.
- Power circuit -> Provide multiple 5V and 3.3V power outputs. (5V output up to 3A with external power supply.)
- Terminal block and header -> Connect to all GPIO headers of Raspberry Pi Pico, 2.54mm / 0.1in pitch.
- See more on Amazon...
Brand: FREENOVE | Manufacturer: Freenove
Warranty: 1 year
See On Amazon #8
SunFounder ESP32 Ultimate Starter Kit (Compatible with Arduino) Pinout Board with ESP32CAM, WiFi, Python C Scratch, Video Courses, IoT for Beginners Engineers, ESP32-WROOM-32E Board & Battery Included
Asin: B0CLDJ2DL7
Versatile Hardware With Battery-Supported Camera Extension: Elevate Your Iot Projects With The Kit's Rich Array Of Components And Its Powerful Esp32 Camera Extension Board. Not Only Does It Offer Real-Time Video Streaming And Image Capture, But It Also Supports Battery Recharging For Enhanced Portability And Flexibility..
Comprehensive Support And Community: Never Get Stuck On A Project Again With The Kit. We Offer Detailed Tutorials, A Vibrant Online Forum, And Dedicated Technical Support To Ensure You Make The Most Out Of Your Iot Journey..
Programming For All Ages And Stages: The Kit Is A Coder's Dream, Offering Tutorials In Three Different Programming Languages: C++, Micropython, And Scratch. Whether You're A Beginner, An Enthusiast, Or A Seasoned Pro, There's A Language For You..
Rich Applications And Engaging Projects: Unlock A World Of Possibilities With The Kit. From Basic Projects To Home Automation & Multimedia Applications, The Kit Comes Packed With A Variety Of Engaging Projects That Not Only Educate But Also Entertain..
Features
- All-in-One Starter Kit for All Levels: The SunFounder ESP32 Ultimate Starter Kit is ideal for all skill levels, offering a mix of basic and advanced IoT projects. It includes comprehensive 50+ video tutorials, making it easier to master everything from simple setups to complex tasks like Bluetooth control and Home Automation.
- Rich Applications and Engaging Projects: Unlock a world of possibilities with the kit. From basic projects to home automation & multimedia applications, the kit comes packed with a variety of engaging projects that not only educate but also entertain.
- Versatile Hardware with Battery-Supported Camera Extension: Elevate your IoT projects with the Kit's rich array of components and its powerful ESP32 Camera Extension board. Not only does it offer real-time video streaming and image capture, but it also supports battery recharging for enhanced portability and flexibility.
- Programming for All Ages and Stages: The Kit is a coder's dream, offering tutorials in three different programming languages: C++, MicroPython, and Scratch. Whether you're a beginner, an enthusiast, or a seasoned pro, there's a language for you.
- Comprehensive Support and Community: Never get stuck on a project again with the Kit. We offer detailed tutorials, a vibrant online forum, and dedicated technical support to ensure you make the most out of your IoT journey.
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 2.50 x 9.80 x 6.50 inches
Warranty: 1 year warranty
See On Amazon #9
KeeYees ESP32S ESP32 Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1 Microcontroller ESP-WROOM-32 Chip for Arduino (38PIN Narrow Version, 2PCS)
Asin: B07QCP2451 | Ean: 0713871269840 | UPC: 713871269840
Support Lua Program, Easy To Develop. Support Of Three Modes: Ap, Sta And Ap + Sta..
Technical Support: Our Pdf Tutorial Is Available On This Page. Please Pull Down This Page To Find The Tutorial: User Guide (Pdf).
This Board Is Used With 2.4 Ghz Dual-Mode Wi-Fi And Bluetooth Chips Esp-Wroom-32, As Well As The 40Nm Low-Power Technology..
The Module Has 38 Pins And Has More Features Than A 30-Pin Module. Narrower Width, Compatible With Breadboard.
Features
- This module is safe, reliable, and scalable to a variety of applications.
- The module has 38 pins and has more features than a 30-pin module. Narrower width, compatible with breadboard
- Support Lua program, easy to develop. Support of three modes: AP, STA and AP + STA.
- This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips ESP-WROOM-32, as well as the 40nm low-power technology.
- Technical Support: Our PDF tutorial is available on this page. Please pull down this page to find the tutorial: User Guide (PDF)
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
Dimensions: 0.47 x 1.90 x 1.00 inches
See On Amazon #10
naughtystarts for ESP32 Breakout Board 3.5mm / 0.14" Terminal GPIO Expansion Board for 0.9" / 1.0" Size ESP32 Module ESP-WROOM-32 ESP32-DevKitC (Pack of 2pcs)
Asin: B0BYS6THLF
Shrapnel Screw Terminal: 3.5Mm / 0.14" Pitch.
It's Fully Assembled, No Soldering Required..
It's Suitable For 18~24Awg Cable Connection, Easy To Use..
The Dual-Row Input Bus Allows You To Plug In 0.9 "Or 1.0" Esp32 Modules For Maximum Compatibility..
Features
- for ESP32 GPIO expansion board 38pin with terminal.
- The dual-row input bus allows you to plug in 0.9 or 1.0 ESP32 modules for maximum compatibility.
- Shrapnel Screw Terminal: 3.5mm / 0.14 Pitch
- It's suitable for 18~24AWG cable connection, easy to use.
- It's fully assembled, no soldering required.
- See more on Amazon...
Brand: naughtystarts | Manufacturer: naughtystarts
Dimensions: 0.59 x 3.94 x 3.15 inches
Warranty: 3 Years
See On Amazon #11
LAFVIN Basic Starter Kit for ESP32 ESP-32S WiFi I OT Development Board with Tutorial Compatible with Arduino IDE
Asin: B0BVZBTP8V | Ean: 0732214747807 | UPC: 732214747807
You Can Use Esp32 Modules To Control Other Modules, Such As Led,Dht11,Oled Module, Etc.
Please Download Our Tutorial And Learn After You Receive The Goods..
The Tutorial Include Codes And Lessons.It Will Teach Every Users How To Assembly Basic Starter Kit For Esp32..
The Basic Starter Kit Is Easy To Use And You Can Learn To Program At An Introductory Level..
Features
- Perfect choice for beginners to learn, electronics and program.
- The Basic Starter Kit is easy to use and you can learn to program at an introductory level.
- You can use ESP32 modules to control other modules, such as LED,DHT11,OLED module, etc
- The tutorial include codes and lessons.It will teach every users how to assembly Basic Starter Kit for ESP32.
- Please download our tutorial and learn after you receive the goods.
- See more on Amazon...
Brand: LAFVIN | Manufacturer: LAFVIN
Dimensions: 1.42 x 5.51 x 3.35 inches
See On Amazon #12
ideaspark ESP32 Development Board Integrated 0.96 Inch OLED Display,CH340 Driver,WiFi+BLE Wireless Module,and Micro USB Works Great for Arduino/Micropython(Pin Header Soldered)
Asin: B0CN4F354N | Ean: 0727210185197 | UPC: 727210185197
This Board Uses I2c To Connect To An Oled Display Via The Sda (D21 / Gpio21) And Scl (D22 / Gpio22) Pins. With This Board,It's Easy To Display A Variety Of Information And Data.
This Board Is An Outstanding Option For Various Internet Of Things (Iot) Projects. It Can Be Used To Display Network Connection Status,Monitor Information, Power Levels, And Other Relevant Data. Additionally, It's Suitable For Building Internet Weather Stations, News Stations, Clocks, And Other Similar Applications.
To Install The New Version Driver For Ch340,Simply Search For The Keywords "Ch340 Driver" On Google.Com Or Bing.Com And Follow The Installation Instructions Provided.Recommended For Win10 Operating System.
The Board Is Based On Esp32-Wroom-32 Module Integrated With Antenna Switches, Rf Balun, Power Amplifiers, Low-Noise Amplifiers, Filters, And Management Modules, And The Entire Solution Occupies The Least Area Of Pcb. 2.4 Ghz Wi-Fi Plus Ble Dual-Mode Chip, With Tsmc Ultra-Low Power Consumption 40Nm Technology, Power Dissipation Performance And Rf Performance Is The Best, Safe And Reliable, Easy To Extend To A Variety Of Applications.
Features
- The ESP32 0.96'' OLED board has all the features of the traditional ESP32 Devkit V1 module,with the same exact peripheral ports,offers seamless integration with a 0.96-inch OLED display, eliminating the need for frustrating wires and breadboards.Display features a high-resolution 128x64 with SSD1306 driver and is compatible with I2C interfaces. Plus,It uses Micro usb cable to connect. Say goodbye to messy setups and hello to hassle-free electronics with the ESP32 board
- The Board is based on ESP32-WROOM-32 module integrated with Antenna switches, RF Balun, power amplifiers, low-noise amplifiers, filters, and management modules, and the entire solution occupies the least area of PCB. 2.4 GHz Wi-Fi plus BLE dual-mode chip, with TSMC Ultra-low power consumption 40nm technology, power dissipation performance and RF performance is the best, safe and reliable, easy to extend to a variety of applications
- This board uses I2C to connect to an OLED display via the SDA (D21 / GPIO21) and SCL (D22 / GPIO22) pins. With this board,it's easy to display a variety of information and data
- To install the new version driver for CH340,simply search for the keywords CH340 Driver on Google.com or Bing.com and follow the installation instructions provided.Recommended for Win10 Operating System
- This board is an outstanding option for various Internet of Things (IoT) projects. It can be used to display network connection status,monitor information, power levels, and other relevant data. Additionally, it's suitable for building Internet Weather Stations, News Stations, Clocks, and Other similar applications
- See more on Amazon...
Brand: ideaspark | Manufacturer: ideaspark
Dimensions: 0.63 x 2.83 x 2.05 inches
Warranty: No
See On Amazon #13
DIYmall 2.8'' ESP32 Module ESP32-2432S028R WiFi+BT Dual-core 240X320 Smart Display Screen LCD TFT Module ILI9341 Driver for Arduino IoT
Asin: B0BVFXR313
It Can Customize The App Control Module And Interface, Which Is Very Suitable For Making An App Interface That Meets Its Own Requirements.
Application: Home Smart Device Image Transmission, Wireless Monitoring, Smart Agriculture Qr Wireless Recognition, Wireless Positioning System Signal, And Other Iot Applications.
Support: ①Uart/Spi/I2c/Pwm/Adc/Dac And Other Interfaces②ov2640 And Ov7670 Cameras, Built-In Flash③picture Wifi Upload④tf Card⑤multiple Sleep Modes⑥embedded Lwip And Freertos⑦sta/Ap/Sta+Ap Working Mode⑧smart Config⑨airkiss One-Click Network Configuration⑩secondary Development.
Real Lnternet Of Things Development Tool With A Control-Lable Display Screen, Which Can Be Used For App Remote Control, Remote Environmental Data Collection, Remote Data Fusion, Remote Parameter Setting And Other Lot Development Applications.
Features
- ESP32-2432S028 development board is based on the ESP32-DOWDQ6 controller, low-power, dual-core CPU, clock frequency up to 240MHZ, integrates a wealth of resource peripherals, high-speed SDIO,SPI, UART and other functions
- Real lnternet of Things development tool with a control-lable display screen, which can be used for APP remote control, remote environmental data collection, remote data fusion, remote Parameter setting and other loT development applications
- It can customize the app control module and interface, which is very suitable for making an app interface that meets its own requirements
- Support: UART/SPI/I2C/PWM/ADC/DAC and other interfaces OV2640 and OV7670 cameras, built-in flash picture WiFI upload TF card multiple sleep modes Embedded Lwip and FreeRTOS STA/AP/STA+AP working mode Smart Config AirKiss one-click network configuration secondary development
- Application: Home smart device image transmission, Wireless monitoring, Smart agriculture QR wireless recognition, Wireless positioning system signal, And other IoT applications
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
See On Amazon #14
Freenove ESP32-S3-WROOM CAM Board (Compatible with Arduino IDE), Onboard Camera Wireless, Python C Code, Detailed Tutorial, Example Projects
Asin: B0BMQ8F7FN | Model: FNK0085 | PartNumber: FNK0085
2 Tutorials With Micropython And C Code -> The Download Link Can Be Found On The Product Box. (No Paper Tutorial.).
Easy To Use -> Just Connect It To Your Computer (Installed Ide And Driver) With A Usb Cable To Program It..
Example Projects -> The Tutorial Will Show You Several Typical Projects With Code And Explanations..
1Gb Memory Card -> Can Be Inserted Into The Esp32-S3 Board To Store Files. (Included In This Kit.).
Features
- ESP32-S3-WROOM -> A powerful and small controller with onboard camera and wireless.
- 1GB Memory Card -> Can be inserted into the ESP32-S3 board to store files. (Included in this kit.)
- 2 tutorials with MicroPython and C code -> The download link can be found on the product box. (No paper tutorial.)
- Example projects -> The tutorial will show you several typical projects with code and explanations.
- Easy to use -> Just connect it to your computer (installed IDE and driver) with a USB cable to program it.
- See more on Amazon...
Brand: FREENOVE | Manufacturer: Freenove
Dimensions: 0.98 x 4.92 x 3.15 Inches
Warranty: 1 year
See On Amazon #15
HiLetgo 2pcs ESP32-DevKitC ESP32-WROOM-32U Core Board ESP32 ESP-32 ESP-WROOM-32U Development Board for Arduino
Asin: B09KLS2YB3 | Model: 3-01-1670 | PartNumber: 3-01-1670
Esp32-Devkitc V4 Is A Small-Sized Esp32-Based Development Board..
Most Of The I/O Pins Are Broken Out To The Pin Headers On Both Sides For Easy Interfacing..
Esp32 Esp-32 Esp-Wroom-32U Development Board.
Features
- ESP32-DevKitC ESP32-WROOM-32U Core Board
- ESP32 ESP-32 ESP-WROOM-32U Development Board
- ESP32-DevKitC V4 is a small-sized ESP32-based development board.
- Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #16
HiLetgo 3pcs ESP32 Mini ESP-WROOM-32 Development Board WLAN WiFi Bluetooth IoT Development Board
Asin: B07BK435ZW | Model: 8541612412 | PartNumber: 8541612412
Input/Output Voltage: Dc 3.3V.
Sram: 520Kb External Flash.
I/O Pins: 34.
Power Supply Voltage: Dc 5V (Usb).
Features
- ESP32 Mini development board, everything needed to program the ESP32 module, ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino IDE.
- Power supply voltage: DC 5V (USB)
- Input/Output voltage: DC 3.3V
- I/O Pins: 34
- SRAM: 520KB External Flash
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.02 pounds
See On Amazon #17
HiLetgo ESP32 LCD WiFi Kit ESP-32 1.14 Inch LCD Display WiFi+Bluetooth CH9102 USB Type-C Internet Development Board for Arduino ESP8266 NodeMCU
Asin: B07X1W16QS | Model: 3-01-1530 | PartNumber: 3-01-1530
Sram: 520 Kb Sram.
Usb: Type-C.
Usb To Ttl: Ch9102.
Flash: Qspi Flash 4Mb.
Features
- Chipset: ESPRESSIF-ESP32 240MHz Xtensa single-/dual-core 32-bit LX6 Microprocessor
- FLASH: QSPI flash 4MB
- SRAM: 520 kB SRAM
- USB to TTL: CH9102
- USB: Type-C
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.33 x 2.02 x 0.98 Inches
See On Amazon #18
Waveshare ESP32-S3 4.3inch Capacitive Touch Display 800x480 Based on ESP32-S3 Microcontroller 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up to 240MHz Frequency, Support 2.4GHz WiFi & Bluetooth 5
Asin: B0CTG8LZ6Z | Model: 4.3inch | PartNumber: 4.3inch
Built In 512Kb Of Sram And 384Kb Rom, With Onboard 8Mb Psram And 8Mb Flash..
Supports Capacitive Touch Control Via I2c Interface, 5-Point Touch With Interrupt Support. Onboard Can, Rs485, I2c Interface And Tf Card Slot, Integrates Full-Speed Usb Port..
Onboard 4.3Inch Capacitive Touch Display, 800×480 Resolution, 65K Color. Can Smoothly Run Gui Programs Such As Lvgl..
Equipped With Xtensa 32-Bit Lx7 Dual-Core Processor, Up To 240Mhz Main Frequency. Supports 2.4Ghz Wi-Fi (802.11 B/G/N) And Bluetooth 5 (Le), With An Onboard Antenna..
Features
- ESP32-S3-Touch-LCD-4.3 integrates RGB interface LCD with 5-point capacitive touch, multiple peripheral interfaces.
- Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with an onboard antenna.
- Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash.
- Onboard 4.3inch capacitive touch display, 800 480 resolution, 65K color. Can smoothly run GUI programs such as LVGL.
- Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port.
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Dimensions: 1.96 x 0.30 x 2.60 inches | Weight: 0.10 pounds
Warranty: LCD Monitors
See On Amazon #19
Freenove Ultimate Starter Kit for ESP32-WROVER (Included) (Compatible with Arduino IDE), Onboard Camera Wireless, Python C, 814-Page Detailed Tutorial, 240 Items, 127 Projects
Asin: B0CJJJ7BCY | Model: FNK0047B | PartNumber: FNK0047B
814-Page Detailed Tutorial (Including Basic Electronics Knowledge) -> The Download Link Can Be Found On The Product Box. (No Paper Tutorial.).
1Gb Memory Card -> Can Be Inserted Into The Esp32 Board To Store Files. (Included In This Kit.).
240 Items For 127 Projects -> Each Project Has Circuit Diagrams And Verified Code With Detailed Explanations..
3 Programming Languages -> Micropython, C And Processing (Java)..
Features
- ESP32-WROVER (with memory card slot) -> A powerful and small controller with onboard camera and wireless. (Included in this kit.)
- 3 programming languages -> MicroPython, C and Processing (Java).
- 814-page detailed tutorial (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
- 240 items for 127 projects -> Each project has circuit diagrams and verified code with detailed explanations.
- 1GB Memory Card -> Can be inserted into the ESP32 board to store files. (Included in this kit.)
- See more on Amazon...
Brand: FREENOVE | Manufacturer: Freenove
Warranty: 1 year
See On Amazon #20
Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800 480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up to 240MHz Frequency, Supports WiFi & Bluetooth, with Onboard Antenna
Asin: B0CNCRZWVB | Model: ESP32-S3-Touch-LCD-4.3 | PartNumber: ESP32-S3-Touch-LCD-4.3
Onboard 4.3Inch Capacitive Touch Display, 800×480 Resolution, 65K Color. Supports Capacitive Touch Control Via I2c Interface, 5-Point Touch With Interrupt Support.
Supports Flexible Clock, Module Power Supply Independent Setting, And Other Controls To Realize Low Power Consumption In Different Scenarios.
Onboard Can, Rs485, I2c Interface And Tf Card Slot, Integrates Full-Speed Usb Port.
Built In 512Kb Of Sram And 384Kb Rom, With Onboard 8Mb Psram And 8Mb Flash.
Features
- Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
- Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash
- Onboard 4.3inch capacitive touch display, 800 480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
- Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port
- Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
See On Amazon
Looking For Something Else?
Search