HELION Solid Carbide Square End Mill Inch High Feed Helix for Aluminum/Non-Ferrous Materials - Speed ZR - 2 Flutes - 45 Degrees Helix AlTiN/ZrN Coated - Made in EU (1/2 in)
Asin: B0C4SWSVGK | Ean: 8445580042750
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.✔️ Recommended Uses - Full Slot Machining, Side Milling, Interpolation, Ramping..
✔️ Solid Carbide - The Material Is European Origin Ultra Fine Grain Carbide. We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance Of The Material. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps Keep The Surface Quality Of Your Work-Piece At The Best Level Possible..
✔️ Coating Material Basis - Aluminum Titanium Nitride (Altin) And Zirconium Nitride (Zrn)..
✔️ Ideal For Aluminum Applications - High Feed U-Type Design Makes These Cutters Ideal For Working With Aluminum Alloy, Bronze, Plastics, Brass And Copper..
Features
- HIGH PERFORMANCE - Cuts faster due to superior material removal rate (MRR), especially when gouging.
- IDEAL FOR ALUMINUM APPLICATIONS - High feed U-type design makes these cutters ideal for working with aluminum alloy, bronze, plastics, brass and copper.
- RECOMMENDED USES - Full Slot Machining, Side Milling, Interpolation, Ramping.
- COATING MATERIAL BASIS - Aluminum Titanium Nitride (AlTin) and Zirconium Nitride (ZrN).
- SOLID CARBIDE - The material is European origin ultra fine grain carbide. We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
- See more on Amazon...
Brand: HELION | Manufacturer: HELION
Dimensions: 3.00 x 0.50 x 0.50 inches | Weight: 0.24 pounds
See On Amazon Similar To HELION Solid Carbide Square End
#1
HELION Tools Carbide Bull End Mill Metric, 2mm Dia x 0.2mm Corner Radius x 2.4mm LOC x 4mm Shank, 16mm Neck, 50mm Overall Length, 2 Flutes, TiAlN Coated, Rotary Professional CNC Carving Cutter Bits
Asin: B0C8MQMMNT | Ean: 8445580031594
✔️ Solid Carbide - The Material Is European Origin Ultra-Fine Grain Carbide. We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness..
✔️ Recommended Uses – First Choice For Full Slot Machining, Side Milling And Interpolation As A Square Nose Endmill..
✔️ Strong Teeth With Double Relief Angle - This End Mill Achieves Excellent Production Rates Thanks To The Increased Hardness Of The Teeth. Length Of Cut (Loc) And Overall Length (Oal) As Described..
✔️ Good For Hard Materials - Special For Working With Aluminum, Titanium, Inconel, Stainless Steel, Super Alloys And Cast Iron..
Features
- HIGH PERFORMANCE - High precision and performance work in roughing or finishing operations in any machining process: grooving, contouring, and even more operations.
- GOOD FOR HARD MATERIALS - Special for working with Aluminum, Titanium, Inconel, Stainless Steel, Super Alloys and Cast Iron.
- SOLID CARBIDE - The material is European origin ultra-fine grain carbide. We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness.
- STRONG TEETH WITH DOUBLE RELIEF ANGLE - This end mill achieves excellent production rates thanks to the increased hardness of the teeth. Length of cut (LOC) and Overall length (OAL) as described.
- RECOMMENDED USES First choice for Full Slot Machining, Side Milling and Interpolation as a square nose endmill.
- See more on Amazon...
Brand: HELION | Manufacturer: HELION
Dimensions: 0.10 x 1.97 x 0.16 inches
See On Amazon #2
Titan TC10556 Solid Carbide End Mill, Regular Length, 4 Flute, Square End, 30 Degree Helix, Uncoated, 7/8" Size, 7/8" Shank Diameter, 4" Overall Length, 1-1/2" Cutting Length
Asin: B00OULLN3I | Model: TNU 131107 | PartNumber: TNU 131107
Brand: TITAN | Manufacturer: Titan USA
See On Amazon #3
HELION Solid Carbide Square End Mill Inch for Aluminum/Non-Ferrous Materials - 3 Flutes - 45 Degrees Helix - Uncoated (Bright) - High Speed Cutting - Made in EU (1/4 in)
Asin: B0C39J61WS | Ean: 8445580042699
✔️ Recommended Uses - Full Slot Machining, Side Milling, Interpolation, Ramping..
✔️ Strong Teeth With Double Relief Angle - Achieves Excellent Production Rates Thanks To The Increased Hardness Of The Teeth..
✔️ Solid Carbide - The Material Is European Origin Ultra Fine Grain Carbide. We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance Of The Material. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps Keep The Surface Quality Of Your Work-Piece At The Best Level Possible..
✔️ Ideal For Aluminum Applications - High Feed U-Type Design Makes These Cutters Ideal For Working With Aluminum Alloy, Bronze, Plastics, Brass And Copper..
Features
- HIGH PERFORMANCE - Cuts faster due to superior material removal rate (MRR), especially when gouging.
- IDEAL FOR ALUMINUM APPLICATIONS - High feed U-type design makes these cutters ideal for working with aluminum alloy, bronze, plastics, brass and copper.
- RECOMMENDED USES - Full Slot Machining, Side Milling, Interpolation, Ramping.
- SOLID CARBIDE - The material is European origin ultra fine grain carbide. We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
- STRONG TEETH WITH DOUBLE RELIEF ANGLE - Achieves excellent production rates thanks to the increased hardness of the teeth.
- See more on Amazon...
Brand: HELION | Manufacturer: HELION
Dimensions: 2.00 x 0.25 x 0.25 inches | Weight: 0.04 pounds
See On Amazon #4
HELION Tools Carbide Ball End Mill Reduced Neck Metric, 2 Flutes, Deep Blue Coated, CNC Carving Cutter Bits for DIYers & Professionals (20mm Neck x 60mm OAL, 3mm Dia x 3mm LOC x 6mm Sh)
Asin: B0D6LVF49Y | Ean: 8445580027016
✔️ Solid Carbide - The Material Is European Origin Ultra-Fine Grain Carbide. We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness..
✔️ Recommended Uses – First Choice For High Speed Machining, Side Milling And Interpolation As A Square Nose Endmill..
✔️ Strong Teeth With Double Relief Angle And Reduced Neck - This End Mill Achieves Excellent Production Rates Thanks To The Increased Hardness Of The Teeth. Length Of Cut (Loc) And Overall Length (Oal) As Described..
✔️ Good For Hard Materials - Special For Working With Aluminum And Cast Iron..
Features
- HIGH PERFORMANCE - High precision and performance work in roughing or finishing operations in any machining process: 3D machining, contouring, and even more operations.
- GOOD FOR HARD MATERIALS - Special for working with Aluminum and Cast Iron.
- SOLID CARBIDE - The material is European origin ultra-fine grain carbide. We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness.
- STRONG TEETH WITH DOUBLE RELIEF ANGLE AND REDUCED NECK - This end mill achieves excellent production rates thanks to the increased hardness of the teeth. Length of cut (LOC) and Overall length (OAL) as described.
- RECOMMENDED USES First choice for High Speed Machining, Side Milling and Interpolation as a square nose endmill.
- See more on Amazon...
Brand: HELION | Manufacturer: HELION
See On Amazon #5
CQSMY Carbide Square End Mill Suitable for Side milling, end milling, CNC Machining Center, Engraving Machine and Other high-Speed Machine Tools.
Asin: B0D3XNNMLW | Ean: 5715211333261
Brand: CQSMY | Manufacturer: CQSM
See On Amazon #6
HELION Solid Carbide Bull End Mill Inch - 4 Flutes - 42 Deg Helix - HRC 45 - AlTiN Nano Coating - High Performance for Stainless Steel and Super Alloys - Made in EU (R0.125, 1/2 in)
Asin: B0C8FTNQPK | Ean: 8445580042897
✔️ Recommended Uses – First Choice For Full Slot Machining, Side Milling And Trochoidal Speed Cutting..
✔️ Strong Teeth With Double Relief Angle - Achieves Excellent Production Rates Thanks To The Increased Hardness Of The Teeth..
✔️ Solid Carbide - The Material Is European Origin Ultra-Fine Grain Carbide. We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps To Keep The Surface Quality Of Your Work-Piece At Its Best..
✔️ Ideal For Hard Materials - Ideal For Working With Titanium, Inconel, Stainless Steel, Super Alloys And Cast Iron..
Features
- HIGH PERFORMANCE - Cuts faster due to superior material removal rate (MRR), especially when gouging.
- IDEAL FOR HARD MATERIALS - ideal for working with Titanium, Inconel, Stainless Steel, Super Alloys and Cast Iron.
- RECOMMENDED USES First choice for Full Slot Machining, Side Milling and Trochoidal Speed Cutting.
- SOLID CARBIDE - The material is European origin ultra-fine grain carbide. We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness. It is stable and has excellent wear-resistance. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps to keep the surface quality of your work-piece at its best.
- STRONG TEETH WITH DOUBLE RELIEF ANGLE - Achieves excellent production rates thanks to the increased hardness of the teeth.
- See more on Amazon...
Brand: HELION | Manufacturer: HELION
Dimensions: 0.10 x 0.50 x 0.50 inches
See On Amazon #7
HELION Solid Carbide Square End Mill Inch for Titanium/Inconel - 4 Flutes - Variable Helix - 35/38 Degrees Helix - HRC 55 - AlTiN Coating - HSC/HPC - Made in EU (1/2 in)
Asin: B0C5HPCQJW | Ean: 8445580042804
✔️ Recommended Uses – First Choice For Full Slot Machining, Side Milling And Trochoidal Speed Cutting. Suitable For Interpolation And Ramping..
✔️ Strong Teeth With Double Relief Angle - Achieves Excellent Production Rates Thanks To The Increased Hardness Of The Teeth..
✔️ Solid Carbide - The Material Is European Origin Ultra-Fine Grain Carbide. We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps To Keep The Surface Quality Of Your Work-Piece At Its Best..
✔️ Ideal For Hard Materials - Ideal For Working With Titanium, Inconel, Stainless Steel, Nickel Alloys..
Features
- HIGH PERFORMANCE - Cuts faster due to superior material removal rate (MRR), especially when gouging.
- IDEAL FOR HARD MATERIALS - ideal for working with Titanium, Inconel, Stainless Steel, Nickel Alloys.
- RECOMMENDED USES First choice for Full Slot Machining, Side Milling and Trochoidal Speed Cutting. Suitable for Interpolation and Ramping.
- SOLID CARBIDE - The material is European origin ultra-fine grain carbide. We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness. It is stable and has excellent wear-resistance. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps to keep the surface quality of your work-piece at its best.
- STRONG TEETH WITH DOUBLE RELIEF ANGLE - Achieves excellent production rates thanks to the increased hardness of the teeth.
- See more on Amazon...
Brand: HELION | Manufacturer: HELION
Dimensions: 3.00 x 0.50 x 0.50 inches | Weight: 0.25 pounds
See On Amazon #8
HELION Solid Carbide Square End Mill Inch High Feed Helix for Aluminum/Non-Ferrous Materials - Speed ZR - 2 Flutes - 45 Degrees Helix AlTiN/ZrN Coated - Made in EU (3/8 in)
Asin: B0C4SXST1C | Ean: 8445580042774
✔️ Recommended Uses - Full Slot Machining, Side Milling, Interpolation, Ramping..
✔️ Solid Carbide - The Material Is European Origin Ultra Fine Grain Carbide. We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance Of The Material. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps Keep The Surface Quality Of Your Work-Piece At The Best Level Possible..
✔️ Coating Material Basis - Aluminum Titanium Nitride (Altin) And Zirconium Nitride (Zrn)..
✔️ Ideal For Aluminum Applications - High Feed U-Type Design Makes These Cutters Ideal For Working With Aluminum Alloy, Bronze, Plastics, Brass And Copper..
Features
- HIGH PERFORMANCE - Cuts faster due to superior material removal rate (MRR), especially when gouging.
- IDEAL FOR ALUMINUM APPLICATIONS - High feed U-type design makes these cutters ideal for working with aluminum alloy, bronze, plastics, brass and copper.
- RECOMMENDED USES - Full Slot Machining, Side Milling, Interpolation, Ramping.
- COATING MATERIAL BASIS - Aluminum Titanium Nitride (AlTin) and Zirconium Nitride (ZrN).
- SOLID CARBIDE - The material is European origin ultra fine grain carbide. We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
- See more on Amazon...
Brand: HELION | Manufacturer: HELION
Dimensions: 2.50 x 0.38 x 0.38 inches | Weight: 0.11 Pounds
See On Amazon #9
CALIFORNIA TOOL Carbide Tapered Square End Mill 0.175" 4FL CT-9203
Asin: B077BNWTVS | Model: 179-A000553-Y CT-9203 | PartNumber: 179-A000553-Y CT-9203
Shank: 1".
Length Of Cut: 1.7".
Overall Length: 5".
Finish:.
Brand: California Tool | Manufacturer: California Tool
See On Amazon #10
YG-1 E5254 Carbide Square Nose End Mill, Uncoated (Bright) Finish, Finishing Cut, 42 Deg Helix, 2 Flutes, 2.75" Overall Length, 0.4375" Cutting Diameter, 0.4375" Shank Diameter
Asin: B0080C8RLO | Model: 21588 | PartNumber: 21588 | Ean: 0300878205584 | UPC: 300878205584
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Low Surface Roughness On The Cutting Edge Reduces Friction And Prevents Chips From Sticking To The Tool.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for high-performance plunging and machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Low surface roughness on the cutting edge reduces friction and prevents chips from sticking to the tool
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #11
YG-1 E9985 High Speed Steel (HSS) Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4.5" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
Asin: B0080C6POU | Model: E9985064 | PartNumber: E9985064
Powdered-Metal High-Speed Steel Is Tougher And More Shock Resistant Than Conventional High-Speed Steel And Cobalt Steel.
Center-Cutting Design Allows The End Mill To Plunge Into Material Like A Drill Bit While Also Performing Conventional Surface Milling.
Square Nose End Mills (Also Called Square End) Create Sharp, Unrounded Cuts.
Four Flutes Produce A Better Finish Than Fewer Flutes.
Features
- Suitable for machining on hardened steel up to Rockwell hardness C45
- Four flutes produce a better finish than fewer flutes
- Powdered-metal high-speed steel is tougher and more shock resistant than conventional high-speed steel and cobalt steel
- Square nose end mills (also called square end) create sharp, unrounded cuts
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #12
YG-1 E5980 Carbide Square Nose End Mill, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 1.5" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080BT0UM | Model: 25558 | PartNumber: 25558 | Ean: 0300878207632 | UPC: 300878207632
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #13
YG-1 E2050 Cobalt Steel Square Nose End Mill, Double End, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3.75" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080BNE0Y | Model: 11321 | PartNumber: 11321
Center-Cutting Design Allows The End Mill To Plunge Into Material Like A Drill Bit For Applications Such As Slotting And Keying.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Features
- Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Center-cutting design allows the end mill to plunge into material like a drill bit for applications such as slotting and keying
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.20 pounds
See On Amazon #14
YG-1 E2039 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.625" Overall Length, 0.75" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080B5X62 | Model: 07357 | PartNumber: 07357 | Ean: 5915903873369
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Square Nose End Mills (Also Called Square End) Create Sharp, Unrounded Cuts.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Four Flutes Produce A Better Finish Than Fewer Flutes.
Features
- Center-cutting design allows the end mill to plunge into material like a drill bit for applications such as slotting, drilling, and profiling on a range of materials
- Four flutes produce a better finish than fewer flutes
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Square nose end mills (also called square end) create sharp, unrounded cuts
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.30 pounds
See On Amazon #15
YG-1 E5024 Carbide Square Nose End Mill, Double End, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4" Overall Length, 0.4375" Cutting Diameter, 0.375" Shank Diameter
Asin: B0080B1PLY | Model: 13589 | PartNumber: 13589
Four Flutes Produce A Better Finish Than Fewer Flutes.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Suitable For General-Purpose Machining On Hardened And High-Alloy Steel, Chromium-Nickel Steel, Steel Casting, Malleable Cast Iron, Brass, Copper, Aluminum With A High Percentage Of Silicon, And Abrasive Plastic.
Features
- Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #16
YG-1 E5981 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 4" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080B0KDS | Model: 28598 | PartNumber: 28598
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Square Nose End Mills (Also Called Square End) Create Sharp, Unrounded Cuts.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Geometry Allows For High Cutting Speeds, Smooth Cutting Action, And Stability.
Features
- 45-degree helix provides efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials
- Geometry allows for high cutting speeds, smooth cutting action, and stability
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Square nose end mills (also called square end) create sharp, unrounded cuts
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.80 pounds
See On Amazon #17
YG-1 E1482 High Speed Steel (HSS) Square Nose End Mill, Metric, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 4.5" Overall Length, 32mm Cutting Diameter, 1" Shank Diameter
Asin: B0080D9U3M | Model: 15046 | PartNumber: 15046
High-Speed Steel Is Compatible With A Variety Of Materials.
Center-Cutting Design Allows The End Mill To Plunge Into Material Like A Drill Bit While Performing Conventional Surface.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For A Range Of Materials.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Features
- Suitable for slotting, pocketing, keyway cutting, and other general-purpose machining on a range of materials
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- High-speed steel is compatible with a variety of materials
- Uncoated (bright) tools have no additional surface treatment or coating for a range of materials
- Center-cutting design allows the end mill to plunge into material like a drill bit while performing conventional surface
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #18
YG-1 E5022 Carbide Square Nose End Mill, Double End, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 1.5" Overall Length, 0.09375" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080CRPWQ | Model: 32556 | PartNumber: 32556
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Suitable For General-Purpose Machining On Hardened And High-Alloy Steel, Chromium-Nickel Steel, Steel Casting, Malleable Cast Iron, Brass, Copper, Aluminum With A High Percentage Of Silicon, And Abrasive Plastic.
Features
- Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.01 pounds
See On Amazon #19
YG-1 E5244 Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 1.5" Overall Length, 0.09375" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080CDJ6M | Model: 30556 | PartNumber: 30556
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #20
YG-1 E1050 High Speed Steel (HSS) Square Nose End Mill, Double End, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3.75" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080BJL7O | Model: 11071 | PartNumber: 11071
Center-Cutting Design Allows The End Mill To Plunge Into Material Like A Drill Bit While Also Performing Conventional Surface Milling.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
High-Speed Steel Is Compatible With A Variety Of Materials.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Features
- Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
- High-speed steel is compatible with a variety of materials
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon
Looking For Something Else?
Search