Taytools Pair Hardened Steel 123 Blocks and Attachment Hardware Kit
Asin: B0C4W1XZWB
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Blocks Have 23 Each .340" Through Holes (5 Holes Tapped With 3/8" X 16 Tpi Threads And 18 Holes Are Untapped). Note: These Blocks Cannot Be Bolted Together Without Exposed Hardware. In Order To Attach Multiple Blocks Together With No Exposed Hardware You Will Require The Taytools 123 Block Hardware Attachment Kit. Approximate Weight Per Block: 430 Grams/.95 Pounds..
This Hardware Kit Contains The Following Parts: Two Each 7/8” Long By 5/16” Diameter 8-32 Threaded Dowels, Two Each 7/8” Long By 5/16” Diameter Through Hole Dowels That Fit 8-32 Bolts, Two Each Of The Following Length 8-32 Allen Head Cap Screws 1-1/2”, 2” And 2-1/2”, 9/64” Hex Key And A Small Flat Screwdriver Tip..
Using This Hardware Allows Two Blocks To Be Attached To Each Other In Literally Every Possible Configuration. Comes In Telescoping Plastic Storage Tube. Patent Pending..
123 Block Hardware Attachnent Kit Allows Joining Blocks Together With All Hardware Buried Within The Blocks. The Hardware Is Also Slightly Smaller Than The Holes Allowing Edges And Faces To Be Joined Together With Faces Being Flush With Each Other..
1-2-3 23 Hole Blocks Are Made Of Hardened Tool Steel (Rc 56-60) And Precision Ground On All Six Sides. Overall Size Within +/- 0.0001" (One Ten Thousandth Of An Inch) Flatness And Parallelism Within +/- 0.0001" (One Ten Thousandth Of An Inch) Squareness On All Sides To Within +/- 0.0003" Per Inch (Three Ten Thousandths Of An Inch) Pairs Are Matched To A Tolerance Of 0.0002" (Two Ten Thousandths Of An Inch). Two (2) Pieces Per Set ..
Features
- 123 blocks coupled with our attachment hardware kit have an almost endless array of uses in the shop. They can be used for machine set up, layout and inspection.
- 1-2-3 23 Hole Blocks are made of hardened tool steel (RC 56-60) and precision ground on all six sides. Overall size within +/- 0.0001 (one ten thousandth of an inch) Flatness and parallelism within +/- 0.0001 (one ten thousandth of an inch) Squareness on all sides to within +/- 0.0003 per inch (three ten thousandths of an inch) Pairs are matched to a tolerance of 0.0002 (two ten thousandths of an inch). Two (2) pieces per set .
- Blocks have 23 each .340 through holes (5 holes tapped with 3/8 x 16 TPI threads and 18 holes are untapped). Note: these blocks cannot be bolted together without exposed hardware. In order to attach multiple blocks together with no exposed hardware you will require the Taytools 123 Block Hardware Attachment Kit. Approximate weight per block: 430 grams/.95 pounds.
- 123 Block Hardware Attachnent Kit allows joining blocks together with all hardware buried within the blocks. The hardware is also slightly smaller than the holes allowing edges and faces to be joined together with faces being flush with each other.
- This hardware kit contains the following parts: two each 7/8 long by 5/16 diameter 8-32 threaded dowels, two each 7/8 long by 5/16 diameter through hole dowels that fit 8-32 bolts, two each of the following length 8-32 Allen Head Cap Screws 1-1/2 , 2 and 2-1/2 , 9/64 hex key and a small flat screwdriver tip.
- Using this hardware allows two blocks to be attached to each other in literally every possible configuration. Comes in telescoping plastic storage tube. Patent pending.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 6.00 x 2.00 x 4.00 inches
See On Amazon Similar To Taytools Pair Hardened Steel 123
#1
Taytools 469744 1-2-3 Blocks No Holes Matched Pair (2 Each), Hardened Steel RC 55-62, (1"x2"x3") 123 Precision Ground Machinist Set Up Blocks
Asin: B081D9CYPJ | Model: 469744 | PartNumber: 469744 | Ean: 0700667469744 | UPC: 700667469744
They Contain No Holes..
There Are 2 Pieces Per Set..
Overall Sizes Are Within +/- 0.0002 Inch Flatness And Parallelism Are Within 0.0002Inch. Squareness On All Sides To Within 0.0002 Inch. Pairs Are Matched To A Tolerance Of 0.0002 Inch..
They Are Precision Ground And Case Hardened To Rc 55-62 On All Six Sides..
Features
- This is a matched set (2 each) of professional quality 1-2-3 blocks
- They are precision ground and case hardened to RC 55-62 on all six sides.
- They contain no holes.
- Overall sizes are within +/- 0.0002 inch Flatness and parallelism are within 0.0002inch. Squareness on all sides to within 0.0002 inch. Pairs are matched to a tolerance of 0.0002 inch.
- There are 2 pieces per set.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #2
WFLNHB 1 x 2 x 3 Inch Blocks No Holes Matched Pair Hardened Steel Plain (1"x2"x3") 123 Set Accuracy Machinist Milling
Asin: B081CJK163 | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6941110125341
123 Inch Block Made Of Accuracy-Grade Tool Steel, Hardened And Ground On All 6 Sides Of The Block.
Heat Treated And Case Hardened To Hrc 57-62.
Surface Finish From 6 To 16 Microinches.
Accuracy And Squareness On All Sides Within .0001"-.0002".
Features
- Dimensions- 1" x 2" x 3", 3.5 lbs. weight
- Accuracy and squareness on all sides within .0001-.0002
- 123 inch block made of accuracy-grade tool steel, hardened and ground on all 6 sides of the block
- Surface finish from 6 to 16 microinches
- Heat treated and case hardened to HRC 57-62
- See more on Amazon...
Brand: WFLNHB | Manufacturer: WFLNHB
Weight: 4.00 Pounds
See On Amazon #3
123 Blocks Attachment Hardware Kit
Asin: B09V44FB6M | Ean: 0850026388381 | UPC: 850026388381
This Hardware Kits Contains The Following Parts: Two Each 7/8 Inch Long By 5/16 Inch Diameter 8-32 Threads Dowels, Two Each 7/8 Inch Long By 5/16 Inch Diameter Through Hole Dowels That Fit 8-32 Bolts, Two Each Of The Following Length 8-32 Allen Head Cap Screws 1-1/2 Inch, 2 Inch And 2-1/2 Inch, 9/64 Inch Hex Key And A Small Flat Screwdriver Tip..
Using This Hardware Allows Two Blocks To Be Attached To Each Other In Literally Every Possible Configuration. Comes In Telescoping Plastic Storage Tube. Patent Pending..
Patent Pending.
To Use, Insert A Through Hole Dowel Into A Block Hole And Thread A Screw Through The Hole. Next Insert A Threaded Dowel Into A Hole In Another Block And Screw And Tighten The Screw T Into This Nut To Secure Two Blocks Together. Each Dowel Has A Straight Screwdriver Slot In Line With The Hole To Assist In Getting The Dowels Perfectly Lined Up To Accept The Bolts. The Included Screwdriver Tip Can Be Inserted In The Slot To Help In Getting The Dowels Lined Up To Accept Screws..
This 123 Block Attachment Hardware Kits Addresses The Above Bolting Limitations. This Hardware Allows Joining Blocks Together With All Hardware Buried Within The Blocks. The Hardware Is Also Slightly Smaller Than The Holes Allowing Edges And Faces To Be Joined Together With Faces Being Flush With Each Other..
Features
- Many inexpensive 123 Blocks contain numerous holes allowing them to be bolted together to increase their usefulness. Several problems arise when attempting to join several blocks together: 1) the holes in the sides and faces are not the same distance from the edge and when different faces are bolted together these are steps or offsets, and 2) using readily available bolts and nuts will leave hardware proud of the block s surface interfering with the task at hand.
- This 123 Block Attachment Hardware Kits addresses the above bolting limitations. This hardware allows joining blocks together with all hardware buried within the blocks. The hardware is also slightly smaller than the holes allowing edges and faces to be joined together with faces being flush with each other.
- This hardware kits contains the following parts: two each 7/8 inch long by 5/16 inch diameter 8-32 threads dowels, two each 7/8 inch long by 5/16 inch diameter through hole dowels that fit 8-32 bolts, two each of the following length 8-32 Allen Head Cap Screws 1-1/2 inch, 2 inch and 2-1/2 inch, 9/64 inch hex key and a small flat screwdriver tip.
- To use, insert a through hole dowel into a block hole and thread a screw through the hole. Next insert a threaded dowel into a hole in another block and screw and tighten the screw t into this nut to secure two blocks together. Each dowel has a straight screwdriver slot in line with the hole to assist in getting the dowels perfectly lined up to accept the bolts. The included screwdriver tip can be inserted in the slot to help in getting the dowels lined up to accept screws.
- Using this hardware allows two blocks to be attached to each other in literally every possible configuration. Comes in telescoping plastic storage tube. Patent pending.
- Patent Pending
- See more on Amazon...
Brand: 1-2-3 Blocks | Manufacturer: Taylor Toolworks
Dimensions: 4.00 x 1.00 x 1.00 Inches
See On Amazon #4
findmall 1 x 2 x 3 Inch Blocks Matched Pair No Holes Hardened Steel Accuracy Ground Machinist 123 Blocks Set Up Blocks Fit for Accuracy Grinding Layouts
Asin: B07XXP9DKY | Model: findmall | PartNumber: findmall | Ean: 6941110177920
Accuracy And Squareness On All Sides Within .0001"-.0002".
Quantity Deals On 123 Blocks, Parallels, Sets, And Inspection/Set-Up Tooling In The All Industrial Tool Supply.
Dimensions- 1" X 2" X 3", 3.5 Lbs. Weight.
Made Of Precision-Grade Tool Steel Hardened And Ground On All 6 Sides Of Block.
Features
- Heat treated and case hardened to HRC 57-62
- Made of precision-grade tool steel hardened and ground on all 6 sides of block
- Accuracy and squareness on all sides within .0001-.0002
- Dimensions- 1 x 2 x 3, 3.5 lbs. weight
- Quantity deals on 123 blocks, parallels, sets, and inspection/set-up tooling in the All Industrial Tool Supply
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 1.00 pounds
See On Amazon #5
Taytools 12 Piece Set Glass Reinforced Nylon Clamping Assembly Set Contains Sizes 2 x 3-1/8 , 4 x 4 and 6 x 6 Guaranteed Square Within +/- 0.002
Asin: B0BDVYYS4J | Model: 12 piece set | PartNumber: 12 piece set
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Set Contains 4 Each Of The Following Sizes: 2-Inch X 3-1/8-Inch, 4-Inch X 4-Inch And 6-Inch X 6-Inch..
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Set contains 4 each of the following sizes: 2-inch x 3-1/8-inch, 4-inch x 4-inch and 6-inch x 6-inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 6.00 x 9.00 x 11.00 Inches
See On Amazon #6
Taytools 106391 4 Piece Set 6 x 6 Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002
Asin: B0BDVSTKCJ | Model: 106391 | PartNumber: 106391
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Overall Size Is 6-Inch X 6-Inch. Leg Thickness Is 0.950 Inch And Leg Width Is 0.1.380 Inch.
.
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Overall size is 6-inch x 6-inch. Leg thickness is 0.950 inch and leg width is 0.1.380 inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 0.95 x 6.00 x 6.00 Inches
See On Amazon #7
Taytools 776629 4 Piece Set of Solid Machinist Squares, 2-3/4, 3-3/4 , 4-3/4 and 6-3/4 inch Accurate to 0.001
Asin: B092RLD3WP
Each Square Is Made From 2 Pieces Of Tool Steel. The Bases And Blades Are Riveted Together With 2 Pins Producing A Strong And Invisible Joint..
Each Square Guaranteed To Be Accurate To 0.001" Over The Length Of The Blade. Comes In A Hinged Plastic Case..
All Faces And Edges Are Ground And Lapped For Straightness And Parallelism..
The Set Include The Following Squares: 2-3/4 Inch, 3-3/4 Inch, 4-3/4 Inch And 6-3/4 Inch..
Features
- This is a 4-piece set of precision machinist squares and are perfect for the professional machinist, meticulous wood worker, or DIY perfectionist
- The set include the following squares: 2-3/4 inch, 3-3/4 inch, 4-3/4 inch and 6-3/4 inch.
- Each square is made from 2 pieces of tool steel. The bases and blades are riveted together with 2 pins producing a strong and invisible joint.
- All faces and edges are ground and lapped for straightness and parallelism.
- Each square guaranteed to be accurate to 0.001 over the length of the blade. Comes in a hinged plastic case.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #8
Taytools 106392 4 Piece Set 8 x 8 Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002
Asin: B0BDVWZ2N4 | Model: 106392 | PartNumber: 106392
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Overall Size Is 8-Inch X 8-Inch. Leg Thickness Is 1.130 Inch And Leg Width Is 0.1.570 Inch..
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Overall size is 8-inch x 8-inch. Leg thickness is 1.130 inch and leg width is 0.1.570 inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 1.13 x 8.00 x 8.00 Inches
See On Amazon #9
2-4-6 Blocks Matched Pair (2 Each), Hardened Steel RC 55-62, 23 Holes (2x4x6 Inches) 246 Precision Ground Machinist Set Up Blocks TTW246
Asin: B0722MXJRX | Ean: 0700667469713 | UPC: 700667469713
Squareness On All Sides Within 0.0003".
Overall Size Is Within +/- .0003"; Flatness And Parallelism Within .0003"..
23 Through Holes (5 Tapped 5/8"-11 Tpi And 18 Plain).
Professional Quality Precision Ground Steel And Case Hardened To Rc 55-62 On All Six Sides.
Features
- Matched pair 2-4-6 blocks includes 2 blocks
- Professional quality precision ground steel and case hardened to RC 55-62 on all six sides
- Squareness on all sides within 0.0003
- 23 through holes (5 tapped 5/8-11 TPI and 18 plain)
- Overall size is within +/- .0003; Flatness and parallelism within .0003.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #10
Taytools 106389 4 Piece Set 2 x 3-1/8 Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002
Asin: B0BDVV8RJG | Model: 106389 | PartNumber: 106389
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Overall Size Is 2-Inch X 3-1/8 Inch. Leg Thickness Is 0.500 Inch And Leg Width Is 0.700 Inch..
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Overall size is 2-inch x 3-1/8 inch. Leg thickness is 0.500 inch and leg width is 0.700 inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 0.50 x 2.00 x 3.13 Inches
See On Amazon #11
Taytools 770788 1-2-3 Blocks 11 Hole Universal Matched Pair (2 Each) Hardened Steel RC 56-60 Precision Ground
Asin: B0BHF63H29 | Ean: 0796029770788 | UPC: 796029770788
Brand: 1-2-3 Blocks | Manufacturer: Taylor Toolworks
See On Amazon #12
1-2-3 Blocks Single 1/2" Hole Matched Pair (2 Each), Hardened Steel RC 55-62, (1"x2"x3") 123 Precision Ground Machinist Set Up Blocks TTW123SH
Asin: B072P5RQB3 | Model: TTW123SH | PartNumber: TTW123SH | Ean: 0700667464329 | UPC: 700667464329
Squareness On All Sides Within 0.0002".
Overall Size Is Within +/- .0002"; Flatness And Parallelism Within .0002"..
One Single 1/2” Untapped Through Hole.
Professional Quality Precision Ground Steel And Case Hardened To Rc 55-62 On All Six Sides.
Features
- Matched pair 1-2-3 blocks includes 2 blocks
- Professional quality precision ground steel and case hardened to RC 55-62 on all six sides
- Squareness on all sides within 0.0002
- One single 1/2 untapped through hole
- Overall size is within +/- .0002; Flatness and parallelism within .0002.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon
Looking For Something Else?
Search