Bias Tee Wide Band Frequency 10MHz -6GHz RC DF Blocks Amplifier Board for HAM Radio RTL SDR LNA Low Noise Amplifier DC 1-50V
Asin: B0C5QQB1HP
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features
- Bias Tee Wide Band Frequency 10MHz -6GHz RC DF Blocks Amplifier Board for HAM Radio RTL SDR LNA Low Noise Amplifier DC 1-50V
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon Similar To Bias Tee Wide Band Frequency
#1
RTL-SDR Blog V4 R828D RTL2832U 1PPM TCXO HF Bias Tee SMA Software Defined Radio with Dipole Antenna Kit
Asin: B0CD7558GT | Model: rtlsdr_v4_with_antenna | PartNumber: rtlsdr_v4_with_antenna | Ean: 0783495030867 | UPC: 783495030867
Can Tune From 500 Khz To 1.7 Ghz And Has Up To 3.2 Mhz Of Instantaneous Bandwidth (2.4 Mhz Stable). Please Note Rtl-Sdr Dongles Are Rx Only..
Note: The Rtl-Sdr Blog V4 Requires A Driver Update. Please Follow The Installation Manual Carefully! Reviewers That Mention Receiving No Signals Have Not Followed The Instructions!.
Comes With Our Portable Vhf/Uhf Dipole Antenna Kit. Great For Beginners As It Allows For Terrestrial And Satellite Reception. Easy To Mount Outdoors And Designed For Portable And Temporary Outside Usage. Please Do Not Use Outside During Poor Weather Conditions. Not Suitable For Hf Reception..
Several Improvements Over Other Brands Including Use Of The R828d Tuner, Built In Hf Upconverter, Improved Component Tolerances, A 1 Ppm Temperature Compensated Oscillator (Tcxo), Sma F Connector, Aluminum Shielded Case With Thermal Pad For Passive Cooling, Improved Filtering, Activatable Bias Tee Circuit And A Much Improved Antenna Set..
Features
- Includes 1x RTL-SDR Blog V4 R828D RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle and 1x Multipurpose Dipole Antenna Kit
- Several improvements over other brands including use of the R828D tuner, built in HF upconverter, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminum shielded case with thermal pad for passive cooling, improved filtering, activatable bias tee circuit and a much improved antenna set.
- Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). Please note RTL-SDR dongles are RX only.
- Comes with our portable VHF/UHF dipole antenna kit. Great for beginners as it allows for terrestrial and satellite reception. Easy to mount outdoors and designed for portable and temporary outside usage. Please do not use outside during poor weather conditions. Not suitable for HF reception.
- NOTE: The RTL-SDR Blog V4 requires a driver update. Please follow the installation manual carefully! Reviewers that mention receiving no signals have not followed the instructions!
- See more on Amazon...
Brand: RTL-SDR Blog | Manufacturer: RTL-SDR Blog
Dimensions: 9.45 x 7.48 x 1.97 inches
Warranty: 2 years warranty on manufacturing defects
See On Amazon #2
RTL-SDR Blog V3 R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Software Defined Radio with Dipole Antenna Kit
Asin: B0BMKB3L47 | Ean: 0783495030836 | UPC: 783495030836
Can Tune From 500 Khz To 1.7 Ghz And Has Up To 3.2 Mhz Of Instantaneous Bandwidth (2.4 Mhz Stable). (Hf Reception Below 24 Mhz In Direct Sampling Mode With Reduced Performance). Please Note Rtl-Sdr Dongles Are Rx Only..
Comes With Our Portable Vhf/Uhf Dipole Antenna Kit. Great For Beginners As It Allows For Terrestrial And Satellite Reception. Easy To Mount Outdoors And Designed For Portable And Temporary Outside Usage. Please Do Not Use Outside During Poor Weather Conditions. Not Suitable For Hf Reception..
Several Improvements Over Other Brands Including Use Of The R860 Tuner, Improved Component Tolerances, A 1 Ppm Temperature Compensated Oscillator (Tcxo), Sma F Connector, Aluminum Shielded Case With Thermal Pad For Passive Cooling, Activatable Bias Tee Circuit And A Much Improved Antenna Set..
Features
- Includes 1x RTL-SDR Blog V3 R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle and 1x Multipurpose Dipole Antenna Kit
- Several improvements over other brands including use of the R860 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminum shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set.
- Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). (HF reception below 24 MHz in direct sampling mode with reduced performance). Please note RTL-SDR dongles are RX only.
- Comes with our portable VHF/UHF dipole antenna kit. Great for beginners as it allows for terrestrial and satellite reception. Easy to mount outdoors and designed for portable and temporary outside usage. Please do not use outside during poor weather conditions. Not suitable for HF reception.
- See more on Amazon...
Brand: RTL-SDR Blog | Manufacturer: RTL-SDR Blog
Dimensions: 3.15 x 9.84 x 7.87 inches
Warranty: 2 years warranty on manufacturing defects
See On Amazon #3
RTL-SDR Blog V3 R860 RTL2832U 1PPM TCXO SMA Software Defined Radio (Dongle Only) (Black)
Asin: B0BMKZCKTF | Ean: 0783495030843 | UPC: 783495030843
Can Tune From 500 Khz To 1.7 Ghz And Has Up To 3.2 Mhz Of Instantaneous Bandwidth (2.4 Mhz Stable). (Hf Reception Below 24 Mhz In Direct Sampling Mode With Reduced Performance). Please Note Rtl-Sdr Dongles Are Rx Only..
Please Follow The Quickstart Guide Linked In The Included The Manual For Installation Of The Drivers And Free Software. Please Feel Free To Contact Us Via Amazon Messaging For Technical Support - We're Happy To Help.
Several Improvements Over Other Brands Including Use Of The R860 Tuner, Improved Component Tolerances, A 1 Ppm Temperature Compensated Oscillator (Tcxo), Sma F Connector, Aluminum Shielded Case With Thermal Pad For Passive Cooling, And An Activatable Bias Tee Circuit..
Features
- Includes 1x RTL-SDR Blog brand R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle (V3) (Dongle Only)
- Several improvements over other brands including use of the R860 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminum shielded case with thermal pad for passive cooling, and an activatable bias tee circuit.
- Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). (HF reception below 24 MHz in direct sampling mode with reduced performance). Please note RTL-SDR dongles are RX only.
- Please follow the quickstart guide linked in the included the manual for installation of the drivers and free software. Please feel free to contact us via Amazon messaging for technical support - we're happy to help
- See more on Amazon...
Brand: RTL-SDR Blog | Manufacturer: RTL-SDR Blog
Warranty: 2 years warranty on manufacturing defects
See On Amazon #4
RTL-SDR Blog Wideband Low Noise Amplifier Bias Tee Powered
Asin: B07G14Q6XX | Model: WBLNA | PartNumber: WBLNA | Ean: 0651989513519 | UPC: 651989513519
Oip3 = 39.5 Dbm @ 900 Mhz, P1 Saturation = 22.7 Dbm @ 1960 Mhz.
Bias Tee Powered (Needs 3-5V Bias Tee Power).
Gain = 18.7 Db @ 900 Mhz.
Noise Figure = 0.6Db @ 900 Mhz.
Features
- Frequency range of 50 MHz to 4000 MHz
- Noise figure = 0.6dB @ 900 MHz
- OIP3 = 39.5 dBm @ 900 MHz, P1 Saturation = 22.7 dBm @ 1960 MHz
- Gain = 18.7 dB @ 900 MHz
- Bias Tee Powered (Needs 3-5v bias tee power)
- See more on Amazon...
Brand: RTL-SDR Blog | Manufacturer: RTL-SDR Blog
See On Amazon #5
Low Noise Amplifier Module, 20dB High Gain LNA Metal 0.1MHz6GHz Full Band RF Amplifier SMA Female Head for Remote Control Receiver for FM Radio (Shipped with Built in Battery)
Asin: B0BGZ1GZBC | Model: LBECpk1h8gi596-11 | PartNumber: LBECpk1h8gi596-11 | Ean: 7614913681541
Bias Power Supply: The Battery-Free Version Requires Bias Tee Bias Power Supply, Some Devices Have A Bias Power Supply Function, For Example: For Sdrplay 1A.
What You Get: 1 Lna + 1 Usb Cable + 24-Hour Customer Email Service + 100% Satisfaction Guarantee + Fast Delivery. If At Any Time You Are Not Satisfied With Our Product, Please Feel Free To Contact Us.
Wide Range Of Applications: Low-Noise Rf Amplifiers Have Excellent Performance, Good Uniformity, And High Reliability. Suitable For Short Wave, Fm Radio, Remote Control Receiver, Cable Tv Signal Amplifier, Etc.
Stable Performance: The Rf Amplifier Has Ultra-Wide Bandwidth, High Reliability, And Is Not Easy To Corrode And Fall Off. Wide Frequency Range, High Gain, Low Noise Figure, Unconditionally Stable Amplifier Module.
Features
- PROFESSIONAL AMPLIFIER: High linearity, ultra-low noise gain block amplifier. High linearity: +35dBm output IP3; high input power durability, +22dBm continuous wave
- STABLE PERFORMANCE: The RF amplifier has ultra-wide bandwidth, high reliability, and is not easy to corrode and fall off. Wide Frequency Range, High Gain, Low Noise Figure, Unconditionally Stable Amplifier Module
- BIAS POWER SUPPLY: The battery-free version requires Bias Tee bias power supply, some devices have a bias power supply function, for example: for sdrplay 1A
- WIDE RANGE OF APPLICATIONS: Low-noise RF amplifiers have excellent performance, good uniformity, and high reliability. Suitable for short wave, FM radio, remote control receiver, cable TV signal amplifier, etc
- WHAT YOU GET: 1 LNA + 1 USB cable + 24-hour customer email service + 100% satisfaction guarantee + fast delivery. If at any time you are not satisfied with our product, please feel free to contact us
- See more on Amazon...
Brand: LBEC | Manufacturer: LBEC
See On Amazon #6
Nooelec Ham It Down 3GHz Downconverter - Extends The Frequency of Your RTL-SDR or Radio to 3.1GHz! Receive UHF & L-Band Transmissions with Ease. TCXO, SMA Connectivity & Multiple Power Options
Asin: B0CCBNLLSC | Model: 100846 | PartNumber: 100846 | Ean: 0628693723008 | UPC: 628693723008
Operates In Both Transmit And Receive Modes (If Available On Your Sdr).
Internal Rf, If, And Lo Filters For Optimized Performance.
Full 2 Year Product Warranty Directly Through Nooelec.
Very Low Noise Figure For Exceptional Signal Quality.
Can Be Powered By Bias Tee With A Wide Input Voltage Range Of +4V To +5.5V.
Incorporates An Ultra-Precise 1Ppm Tcxo To Provide The 1.5Ghz Lo Frequency For Precise Downconversion.
For More Information Review The Product Page Or Datasheet: Https://Www.Nooelec.Com/Datasheets/100846.
Compatible With Nearly All Software-Defined Radio Devices Such As Our Nesdr Series Of Rtl-Sdrs And The Hackrf.
Features
- Extend the frequency of your RTL-SDR, Software Defined Radio (SDR) or other radio up to 3.1GHz (3100MHz) with ease! Efficiently downconverts signals from 1.55GHz to 3.1GHz with minimal insertion loss
- Compatible with nearly all software-defined radio devices such as our NESDR series of RTL-SDRs and the HackRF
- Operates in both transmit and receive modes (if available on your SDR)
- Incorporates an ultra-precise 1PPM TCXO to provide the 1.5GHz LO frequency for precise downconversion
- Very low noise figure for exceptional signal quality
- Can be powered by bias tee with a wide input voltage range of +4V to +5.5V
- Internal RF, IF, and LO filters for optimized performance
- Full 2 year product warranty directly through Nooelec
- For more information review the product page or datasheet: https://www.nooelec.com/datasheets/100846
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 1.14 x 3.74 x 2.24 inches | Weight: 0.19 pounds
Warranty: 2 year manufacturer warranty
See On Amazon #7
Nooelec SAWbird+ ADS-B: Premium, Dual-Channel, Cascaded Ultra-Low Noise Amplifier (LNA) & Filter Module for Airplane Tracking Applications. 1090MHz (ADSB) and 978MHz (UAT) Center Frequencies
Asin: B0CBD1KK3G | Model: 100847 | PartNumber: 100847 | Ean: 0628693723053 | UPC: 628693723053
Your Purchase Includes A Fully Assembled Sawbird+ Ads-B Module Pre-Installed Into A Beautiful Black Custom Aluminum Enclosure, Two Male To Male Sma Adapters, And A Micro Usb To Dc Barrel Connector Adapter Cable.
50Ω Matched Input/Output For Optimal Signal Transfer.
Proudly Made In North America, Ensuring Exceptional Quality And Reliability. Backed By A Generous 2-Year Warranty For Peace Of Mind.
Both Sides Of The Device Offer A Bias Tee Power Option (3 To 5V Dc And 140Ma Or Higher Current Availability). Alternatively, A Micro Usb Port Is Available To Provide External Power When Bias Tee Power Is Unavailable Or Unsuitable.
Exceptional Out-Of-Band Rejection Levels Of +85Db For Cleaner Signals.
Note: Like Any Other Amplifier, You Must Lower Your Gain Levels And/Or Remove Other Amplifiers In Your Signal Chain To See The Resulting Reception Increase! Otherwise, You Will Overload Your Radio, Resulting In Reduced Or Zero Reception! When Set Up As Intended, Sawbird+ Ads-B Will Greatly Increase The Performance Of Nearly Every Flight Tracking Setup.
For More Information Review The Product Page Or Datasheet: Https://Www.Nooelec.Com/Datasheets/100847.
Sawbird+ Ads-B Increases Snr, And Therefore Signal Range, By Providing An Industry Lowest-In-Class Noise Figure (0.9Db Or Lower) And Substantial Gain (34Db Or Higher) For Both Ads-B And Uat Applications.
Features
- This product is designed to massively increase plane tracking signal strength (SNR) compared to competing products. Drastically outperforms all available, low-cost ADS-B amplifiers and filters!
- SAWbird+ ADS-B increases SNR, and therefore signal range, by providing an industry lowest-in-class noise figure (0.9dB or lower) and substantial gain (34dB or higher) for BOTH ADS-B and UAT applications
- Your purchase includes a fully assembled SAWbird+ ADS-B module pre-installed into a beautiful black custom aluminum enclosure, two male to male SMA adapters, and a micro USB to DC barrel connector adapter cable
- NOTE: Like any other amplifier, you MUST LOWER YOUR GAIN LEVELS AND/OR REMOVE OTHER AMPLIFIERS IN YOUR SIGNAL CHAIN to see the resulting reception increase! Otherwise, you WILL OVERLOAD YOUR RADIO, RESULTING IN REDUCED OR ZERO RECEPTION! When set up as intended, SAWbird+ ADS-B will greatly increase the performance of nearly every flight tracking setup
- Both sides of the device offer a bias tee power option (3 to 5V DC and 140mA or higher current availability). Alternatively, a micro USB port is available to provide external power when bias tee power is unavailable or unsuitable
- Exceptional out-of-band rejection levels of +85dB for cleaner signals
- 50 matched input/output for optimal signal transfer
- Proudly made in North America, ensuring exceptional quality and reliability. Backed by a generous 2-year warranty for peace of mind
- For more information review the product page or datasheet: https://www.nooelec.com/datasheets/100847
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.47 x 1.26 x 0.83 inches | Weight: 0.19 pounds
Warranty: 2 year manufacturer warranty
See On Amazon #8
Flamingo AM - Broadcast AM Bandstop Filter (AM Notch Filter) for Software Defined Radio (SDR) Applications
Asin: B079CMB44V | Model: Flamingo AM | PartNumber: Flamingo AM | Ean: 0616469146243 | UPC: 616469146243
Flamingo Am Was Designed To Provide Approximately 40Db Attenuation For Broadcast Am Frequencies, While Ensuring That Adjacent Bands Are Minimally Affected. The -3Db Rolloff Of The Filter Is 350Khz And 1900Khz. The Minuscule Out-Of-Band Insertion Losses Means The Filter Can Stay In Place For Most Any Application--Though We Do Recommend Removing Flamingo Am From The Signal Chain When Not Receiving Hf Frequencies.
The Filter Is Fully Emi Shielded, Installed In A Custom Anodized Aluminum Enclosure For Further Protection And Isolation. The Front End Is Protected By An Rf-Rated Esd Diode, Which Provides Protection Not Just For Your Filter, But Also The Radio Or Sdr Behind It.
Flamingo Am Is A Proper Bandstop Filter, So You Are Able To Pass-Through Dc (Bias-Tee) Power When Required. Dc Current Handling Is 250Ma (Min), And The Maximum Recommended Signal Level Is 18Dbm (5Vp-P), So There Is No Issue Using The Filter For Higher-Power Applications.
Broadcast Am Stations Can Be Particularly Problematic Due To The High-Powered Transmitters Used For Broadcasting In Some Areas. These Signals Can Overload The Front End Of An Sdr, Causing Imaging And A Number Of Other Issues. As Such, Flamingo Am Makes A Great Companion To Our Ham It Up Series Of Hf Upconverters (Available Separately On Amazon).
Features
- A high-quality, high-performance broadcast AM bandstop filter designed for software defined radio (SDR) applications. Includes free male SMA-male SMA barrel connector! Designed and manufactured by NooElec in North America. Impeccable quality and full 2-year warranty
- Broadcast AM stations can be particularly problematic due to the high-powered transmitters used for broadcasting in some areas. These signals can overload the front end of an SDR, causing imaging and a number of other issues. As such, Flamingo AM makes a great companion to our Ham It Up series of HF upconverters (available separately on Amazon)
- Flamingo AM was designed to provide approximately 40dB attenuation for broadcast AM frequencies, while ensuring that adjacent bands are minimally affected. The -3dB rolloff of the filter is 350kHz and 1900kHz. The minuscule out-of-band insertion losses means the filter can stay in place for most any application--though we do recommend removing Flamingo AM from the signal chain when not receiving HF frequencies
- Flamingo AM is a proper bandstop filter, so you are able to pass-through DC (bias-tee) power when required. DC current handling is 250mA (min), and the maximum recommended signal level is 18dBm (5Vp-p), so there is no issue using the filter for higher-power applications
- The filter is fully EMI shielded, installed in a custom anodized aluminum enclosure for further protection and isolation. The front end is protected by an RF-rated ESD diode, which provides protection not just for your filter, but also the radio or SDR behind it
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.79 x 2.76 x 1.18 Inches
See On Amazon #9
Yard Stick One USB Transceiver
Asin: B06Y1RVHBP | Model: YARD Stick One Bundle | PartNumber: YARD Stick One Bundle | Ean: 0616469145970 | UPC: 616469145970
Integrated Bias-Tee To Power Antenna Port Accessories.
A 915Mhz Sma Antenna Is Included!.
Female Sma Connector For Connecting External Antenna Of Your Choice.
Integrated Receive Amplifier And Transmit Amplifier.
Features
- USB transceiver capable of transmitting and receiving most popular licence-free bands
- Integrated receive amplifier and transmit amplifier
- Integrated bias-tee to power antenna port accessories
- Female SMA connector for connecting external antenna of your choice
- A 915MHz SMA antenna is included!
- See more on Amazon...
Brand: NooElec | Manufacturer: NooElec Inc.
Dimensions: 0.39 x 3.94 x 2.36 Inches
See On Amazon #10
Nooelec SAWbird+ H1 - Premium Saw Filter & Cascaded Ultra-Low Noise Amplifier (LNA) Module for Hydrogen Line (21cm) Applications. 1420MHz Center Frequency. Designed for Software Defined Radio (SDR)
Asin: B07XPV9RX2 | Model: SAWbird+ H1 | PartNumber: SAWbird+ H1 | Ean: 0616469146557 | UPC: 616469146557
Sawbird+ H1 Can Be Powered In 3 Ways: Via Bias Tee, Through The On-Board Microusb Connector, Or Through The On-Board Female Header.
Made In North America With Love. Full 2 Year Warranty And Support Direct Through Nooelec!.
The Module Uses 2 Ultra-Low-Noise Lnas And A Custom High-Performance Saw Filter Centered At The Frequency Of Interest.
Features
- SAWbird+ H1 is a self-contained LNA module designed for hydrogen line detection and similar 21cm band experimentation
- The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest
- SAWbird+ H1 can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through the on-board female header
- Made in North America with love. Full 2 year warranty and support direct through Nooelec!
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.39 x 3.15 x 1.18 inches | Weight: 0.11 Pounds
See On Amazon #11
Flamingo FM - Broadcast FM Bandstop Filter (FM Notch Filter) for Software Defined Radio (SDR) Applications
Asin: B079CNCR8V | Model: Flamingo FM | PartNumber: Flamingo FM | Ean: 0616469146250 | UPC: 616469146250
The Filter Is Fully Emi Shielded, And Installed In A Custom Black Anodized Aluminum Enclosure For Further Protection And Isolation. The Front End Is Protected By An Rf-Rated Esd Diode, Which Provides Protection Not Just For Your Filter, But Also The Radio Or Sdr Behind It.
Flamingo Fm Is A Proper Bandstop Filter, So You Are Able To Pass-Through Dc (Bias-Tee) Power When Required. Dc Current Handling Is 250Ma (Min), And The Maximum Recommended Signal Level Is 18Dbm (5Vp-P), So There Is No Issue Using The Filter For Higher-Power Applications.
Flamingo Fm Was Designed To Provide Approximately 40Db Attenuation For Broadcast Fm Frequencies, While Ensuring That Adjacent Bands Are Minimally Affected. The -3Db Rolloff Of The Filter Is 80Mhz And 115Mhz, Which Means The Vhf Airband (108-137Mhz) Is Minimally Affected. The Minuscule Out-Of-Band Insertion Losses Means The Filter Can Stay In Place For Most Any Application.
Features
- A high-quality, high-performance bandstop filter designed for software defined radio (SDR) applications. Includes free male SMA-male SMA barrel connector!
- Flamingo FM was designed to provide approximately 40dB attenuation for broadcast FM frequencies, while ensuring that adjacent bands are minimally affected. The -3dB rolloff of the filter is 80MHz and 115MHz, which means the VHF airband (108-137MHz) is minimally affected. The minuscule out-of-band insertion losses means the filter can stay in place for most any application
- The filter is fully EMI shielded, and installed in a custom black anodized aluminum enclosure for further protection and isolation. The front end is protected by an RF-rated ESD diode, which provides protection not just for your filter, but also the radio or SDR behind it
- Flamingo FM is a proper bandstop filter, so you are able to pass-through DC (bias-tee) power when required. DC current handling is 250mA (min), and the maximum recommended signal level is 18dBm (5Vp-p), so there is no issue using the filter for higher-power applications
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.79 x 2.76 x 1.18 Inches | Weight: 0.04 Pounds
See On Amazon #12
NESDR SMArTee v2 Bundle - Premium RTL-SDR w/Integrated Bias Tee, Aluminum Enclosure, 0.5PPM TCXO, SMA Input, Antenna Base & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio (SDR)
Asin: B079C4S2BT | Model: NESDR SMArTee Bundle | PartNumber: NESDR SMArTee Bundle | Ean: 0616469146236 | UPC: 616469146236
Same Form Factor As The Other Devices In Our Nesdr Smart Series, Which Means No Usb Occlusion Issues--Run Devices Side-By-Side Without Messy Extension Cables Or Adapters, Even On Embedded Devices Like The Raspberry Pi!.
Designed And Manufactured By Nooelec In North America. Impeccable Quality And Full 2-Year Warranty!.
Always-On, 4.5V Bias-Tee With Independent Ultra-Low-Noise Power Supply And 250Ma Power Capability Allows You To Power Nearly Any Active Antenna Circuitry Without Messing Around With Drivers Or Software.
Unmatched Price & Performance--Redesigned Pcb Reduces Noise By An Average Of A Full 3Db! Includes All The Same Fantastic Features As The Rest Of The Nesdr Smart Series, Including An Ultra-Low Phase Noise Tcxo, With A Guaranteed <0.5Ppm Tolerance Out-Of-The-Box. This Is At Least 4X More Accurate Than Units Advertised As Containing 1Ppm Tcxos, Which Have Up To A +/- 2Ppm Initial Offset.
Features
- An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR, high-quality antenna base, and 3 antenna masts to get you started right away without any further purchases!
- Unmatched price & performance--redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed <0.5PPM tolerance out-of-the-box. This is at least 4x more accurate than units advertised as containing 1PPM TCXOs, which have up to a +/- 2PPM initial offset
- Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues--run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi!
- Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software
- Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.79 x 11.81 x 3.94 inches | Weight: 0.33 pounds
See On Amazon #13
Ham It Up Nano - Tiny HF, MF & LF Upconverter w/TCXO. Extends The Frequency Range of Your Favorite RTL-SDR or Radio Down to 100kHz. Includes Aluminum Enclosure & Accessories. Made in USA!
Asin: B084KL1MXM | Model: Ham It Up Nano | PartNumber: Ham It Up Nano
Small, Light-Weight Module--Just 2.0" X 1.2" X 0.75" (50 X 30 X 18Mm) And 1.6Oz (45G).
Full 2 Year Warranty Direct Through Nooelec! Product Datasheet: Http://Www.Nooelec.Com/Datasheets/100825.
Wide Frequency Capability Of 100Khz-65Mhz, 1Ppm Accuracy, And Bias-Tee Powerable!.
Features
- Ham It Up Nano is a highly portable HF upconverter for radios and software defined radio devices like our NESDR series (RTL-SDR) and the HackRF
- Wide frequency capability of 100kHz-65MHz, 1PPM accuracy, and bias-tee powerable!
- Small, light-weight module--just 2.0 x 1.2 x 0.75 (50 x 30 x 18mm) and 1.6oz (45g)
- Full 2 year warranty direct through Nooelec! Product datasheet: http://www.nooelec.com/datasheets/100825
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.79 x 3.15 x 1.18 Inches | Weight: 0.10 Pounds
Warranty: 2 Year Warranty
See On Amazon #14
Ultra Low Noise Amplifier, LNA Module for RF Software Defined Radio, 0.1MHz 6GHz Full Band 20dB High Gain Power Preamplifier Module for sdrplay 1A (Without Battery)
Asin: B0BZ4VRVPW | Model: Bewinnerxv9tpedzi1-12 | PartNumber: Bewinnerxv9tpedzi1-12
Parameters: Low Noise Amplifier Module1.95Ghz At 20Db High Gain, Input And Output Impedance: 50Ω, Bandwidth: 0.1Mhz‑6Ghz..
Applicable: Rf Amplifier Has Excellent Performance, Excellent Uniformity And High Reliability. It Is Suitable For Shortwave, Fm Radio, Remote Control Receiver, Cable Tv Signal Amplifier, Etc..
Stable Performance: Rf Amplifier Ultra Bandwidth, High Reliability, Not Easy To And Fall Off. Amplifier Module With Wide Frequency Range, High Gain, Low Noise Figure, Unconditionally Stable..
Professional: High Linearity,Ultra Low Noise Gain Block Amplifier. High Linearity: +35Dbm Output Ip3; High Input Power Ruggedness, +22Dbm Continuous Wave..
Features
- Power Supply: Battery less version needs Bias Tee bias power supply, some devices come with bias power supply function such as: for sdrplay 1A.
- Professional: High linearity,ultra low noise gain block amplifier. High linearity: +35dBm output IP3; high input power ruggedness, +22dBm continuous wave.
- Parameters: Low noise amplifier module1.95GHz at 20dB high gain, input and output impedance: 50 , bandwidth: 0.1MHz 6GHz.
- Stable Performance: RF amplifier ultra bandwidth, high reliability, not easy to and fall off. Amplifier module with wide frequency range, high gain, low noise figure, unconditionally stable.
- Applicable: RF amplifier has excellent performance, excellent uniformity and high reliability. It is suitable for shortwave, FM radio, remote control receiver, cable TV signal amplifier, etc.
- See more on Amazon...
Brand: Bewinner | Manufacturer: Bewinner
See On Amazon #15
RF Microwave HF Bias Tee, DC Bias 50K-60MHz Active Antenna Power Supply
Asin: B099PWLD32
Convenient To Wire And Use, Insertion Loss Is 0.1Db@100Khz, 0.2Db@60Mhz. It Is Especially Suitable For All Kinds Of Radio Frequency Receiving Front-End Circuit To Extend Communication Distance..
This Dc Bias Tee Features Wide Frequency Range From 50Khz To 60Mhz, High-Performance, General Purpose Lna Module Available At An Extremely Competitive Price..
We Are So Confident In Our Product That We Offer A 1-Year Warranty For Every Customer. Enjoy Your Shopping And Feel Free To Contact Us!.
Widely Used For Short Wave, Fm Radio, Remote Control Receiver, Cable Tv Signal Amplifier, Gps Satellite Navigation, 2.4G Bluetooth And Wifi Receiver Rf Front-End That Need Low Noise Small Signal Rf To Be Amplified..
Features
- Great RF power supply for active antenna. Can also be used as output block of wide-band amplifier. Communication data is injected through RF terminal.
- Widely used for short wave, FM radio, remote control receiver, cable TV signal amplifier, GPS satellite navigation, 2.4G bluetooth and WIFI receiver RF front-end that need low noise small signal RF to be amplified.
- Convenient to wire and use, insertion loss is 0.1dB@100KHz, 0.2dB@60MHz. It is especially suitable for all kinds of radio frequency receiving front-end circuit to extend communication distance.
- We are so confident in our product that we offer a 1-year warranty for every customer. Enjoy your shopping and feel free to contact us!
- This DC bias tee features wide frequency range from 50KHz to 60MHz, high-performance, general purpose LNA module available at an extremely competitive price.
- See more on Amazon...
Brand: Hyuduo | Manufacturer: Hyuduo
Dimensions: 0.39 x 0.39 x 0.39 Inches | Weight: 0.03 Pounds
See On Amazon #16
0.1MHz 6GHz Full Band Low Noise Amplifier Professional 20dB High Gain LNA RF Power Preamplifier Module (Ship with 2500mAh Li Ion Battery)
Asin: B0D1V5L1V4 | Model: Genericrfmbyo9gh8-11 | PartNumber: Genericrfmbyo9gh8-11
Parameters: Low Noise Amplifier Module1.95Ghz At 20Db High Gain, Input And Output Impedance: 50Ω, Bandwidth: 0.1Mhz‑6Ghz..
Power Supply: Battery Less Version Needs Bias Tee Bias Power Supply, Some Devices Come With Bias Power Supply Function Such As: For Sdrplay 1A..
Applicable: Rf Amplifier Has Excellent Performance, Excellent Uniformity And High Reliability. It Is Suitable For Shortwave, Fm Radio, Remote Control Receiver, Cable Tv Signal Amplifier, Etc..
Stable Performance: Rf Amplifier Ultra Bandwidth, High Reliability, Not Easy To And Fall Off. Amplifier Module With Wide Frequency Range, High Gain, Low Noise Figure, Unconditionally Stable..
Features
- Professional: High linearity,ultra low noise gain block amplifier. High linearity: +35dBm output IP3; high input power ruggedness, +22dBm continuous wave.
- Stable Performance: RF amplifier ultra bandwidth, high reliability, not easy to and fall off. Amplifier module with wide frequency range, high gain, low noise figure, unconditionally stable.
- Parameters: Low noise amplifier module1.95GHz at 20dB high gain, input and output impedance: 50 , bandwidth: 0.1MHz 6GHz.
- Applicable: RF amplifier has excellent performance, excellent uniformity and high reliability. It is suitable for shortwave, FM radio, remote control receiver, cable TV signal amplifier, etc.
- Power Supply: Battery less version needs Bias Tee bias power supply, some devices come with bias power supply function such as: for sdrplay 1A.
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #17
Flamingo+ AM (Flamingo AM v2) - High Attenuation Broadcast AM Bandstop (Notch) Filter for Software Defined Radio (RTL-SDR) Applications. Blocks 300kHz to 1900kHz on Connected Device
Asin: B0BHXFLB72 | Model: Flamingo+ AM | PartNumber: Flamingo+ AM | Ean: 0616469146854 | UPC: 616469146854
Flamingo+ Am Can Pass-Through Dc (Bias-Tee) Power When Required. Dc Current Handling Is 200Ma (Max).
The Notch Filter Is Fully Emi Shielded And Installed In A Custom Anodized Aluminum Enclosure For Further Protection And Isolation. The Front End Is Protected By An Rf-Rated Esd Diode, Which Provides Protection Not Just For Your Filter, But Also For The Radio Or Sdr Behind It.
Flamingo+ Am Makes A Great Companion To Our Ham It Up Series Of Hf Upconverters (Available Separately On Amazon).
Flamingo+ Am Was Designed To Provide Approximately 70Db Attenuation For Broadcast Am Frequencies While Ensuring That Adjacent Bands Are Minimally Affected. The -3Db Rolloff Of The Filter Is 300Khz And 1900Khz. The Minuscule Out-Of-Band Insertion Losses Mean That The Filter Can Stay In Place For Most Any Application -- Though We Do Recommend Removing Flamingo+ Am From The Signal Chain When Not Receiving Hf Frequencies.
Features
- A high-quality, high-performance broadcast AM bandstop (notch) filter designed for software-defined radio (SDR) applications. Includes free male SMA-male SMA barrel connector!
- Flamingo+ AM was designed to provide approximately 70dB attenuation for broadcast AM frequencies while ensuring that adjacent bands are minimally affected. The -3dB rolloff of the filter is 300kHz and 1900kHz. The minuscule out-of-band insertion losses mean that the filter can stay in place for most any application -- though we do recommend removing Flamingo+ AM from the signal chain when not receiving HF frequencies
- Flamingo+ AM can pass-through DC (bias-tee) power when required. DC current handling is 200mA (max)
- Flamingo+ AM makes a great companion to our Ham It Up series of HF upconverters (available separately on Amazon)
- The notch filter is fully EMI shielded and installed in a custom anodized aluminum enclosure for further protection and isolation. The front end is protected by an RF-rated ESD diode, which provides protection not just for your filter, but also for the radio or SDR behind it
- See more on Amazon...
Brand: NESDR | Manufacturer: Nooelec Inc.
Dimensions: 0.39 x 3.15 x 1.18 inches
Warranty: 2 year manufacturer
See On Amazon #18
RF Amplifier, 0.1MHz 6GHz Full Band Low Noise Amplifier, 1.95GHz 20dB High Gain LNA RF Power Preamplifier Module, 50 (2500mAh Li Ion Battery)
Asin: B0CCVST51S | Model: GOSHYDAduxwn0ekv4-11 | PartNumber: GOSHYDAduxwn0ekv4-11
Applicable: Rf Amplifier Has Excellent Performance, Excellent Uniformity And High Reliability. It Is Suitable For Shortwave, Fm Radio, Remote Control Receiver, Cable Tv Signal Amplifier, Etc..
Stable Performance: Rf Amplifier Ultra Bandwidth, High Reliability, Not Easy To And Fall Off. Amplifier Module With Wide Frequency Range, High Gain, Low Noise Figure, Unconditionally Stable..
Professional: High Linearity,Ultra Low Noise Gain Block Amplifier. High Linearity: +35Dbm Output Ip3; High Input Power Ruggedness, +22Dbm Continuous Wave..
Power Supply: Battery Less Version Needs Bias Tee Bias Power Supply, Some Devices Come With Bias Power Supply Function Such As: For Sdrplay 1A..
Features
- PARAMETERS: Low noise amplifier module1.95GHz at 20dB high gain, input and output impedance: 50 , bandwidth: 0.1MHz 6GHz.
- POWER SUPPLY: Battery less version needs Bias Tee bias power supply, some devices come with bias power supply function such as: for sdrplay 1A.
- APPLICABLE: RF amplifier has excellent performance, excellent uniformity and high reliability. It is suitable for shortwave, FM radio, remote control receiver, cable TV signal amplifier, etc.
- PROFESSIONAL: High linearity,ultra low noise gain block amplifier. High linearity: +35dBm output IP3; high input power ruggedness, +22dBm continuous wave.
- STABLE PERFORMANCE: RF amplifier ultra bandwidth, high reliability, not easy to and fall off. Amplifier module with wide frequency range, high gain, low noise figure, unconditionally stable.
- See more on Amazon...
Brand: Goshyda | Manufacturer: GOSHYDA
See On Amazon #19
Ultra Low Noise Amplification, High Gain LNA Amplifier 20dB, Full Band Low Power Amplifier 100k-6GHz with Bias Tee Power Supply for SDRplay 1A
Asin: B0CM38G9N9 | Model: ciciglow1ge8kp9t56 | PartNumber: ciciglow1ge8kp9t56
[High Linearity]: The Full Band Amplifier Has High Linear +35 Dbm Output Ip3, High Input Power Robustness, +22 Dbm Continuous Wave..
[Practical And Reliable]: The Full Band Amplifier Is Versatile And Ideal For Demanding Applications Where Low Noise And High Gain..
[Bias Tee Power Supply]: No Batteries Required, Bias Tee Bias Powered, Some Devices Come With Bias Powered Feature, Such As For Sdrplay 1A..
[High Gain]: The Low Noise Amplifier Modul Has An Ultra Low Noise Figure, 0.4 Db Nf At 1.95 Ghz, High Gain At 1.95 Ghz, And 20 Db Gain..
Features
- [Ultra Low Noise Amplification]: The low noise amplifier module provides ultra low noise coefficient, with working frequency range of 100K to 6GHz.
- [High Gain]: The low noise amplifier modul has an ultra low noise figure, 0.4 dB NF at 1.95 GHz, high gain at 1.95 GHz, and 20 dB gain.
- [High Linearity]: The full band amplifier has high linear +35 dBm output IP3, high input power robustness, +22 dBm continuous wave.
- [Bias Tee Power Supply]: No batteries required, Bias Tee bias powered, some devices come with bias powered feature, such as for sdrplay 1A.
- [Practical and Reliable]: The full band amplifier is versatile and ideal for demanding applications where low noise and high gain.
- See more on Amazon...
Brand: ciciglow | Manufacturer: ciciglow
See On Amazon #20
Nooelec SAWbird+ IR - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for Iridium and Inmarsat Applications. 1620MHz Center Frequency
Asin: B07K1LW983 | Model: SAWbird+ IR | PartNumber: SAWbird+ IR | Ean: 0616469146373 | UPC: 616469146373
The Amplifier Can Be Powered In 3 Ways: Via Bias Tee, Through The On-Board Microusb Connector, Or Through Dc Barrel Connector With The Included Usb To Dc Connector Adapter.
Includes Free Male Sma To Male Sma Adapter And Usb To Dc Barrel Connector Adapter. Full 2 Year Warranty And Support Direct Through Nooelec!.
Though Compatible With Most Sdrs, We Recommend Use In Conjunction With Nesdr Smartee (Available On Amazon, Item Id B079c4s2bt)Though Compatible With Most Sdrs, We Recommend Use In Conjunction With Nesdr Smartee Xtr V2 (Available On Amazon, Item Id B06y1gn5rp).
The Module Uses 2 Ultra-Low-Noise Lnas And A Custom High-Performance Saw Filter Centered At The Frequency Of Interestthe Module Uses 2 Ultra-Low-Noise Lnas And A Custom High-Performance Saw Filter Centered At The Frequency Of Interest.
Features
- SAWbird+ IR is a self-contained LNA module designed for capturing L-Band signals, particularly from Iridium and Inmarsat satellites
- The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interestThe module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest
- The amplifier can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to DC connector adapter
- Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee (available on Amazon, item ID B079C4S2BT)Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee XTR v2 (available on Amazon, item ID B06Y1GN5RP)
- Includes free male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through Nooelec!
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.39 x 4.33 x 3.15 inches | Weight: 0.11 pounds
See On Amazon
Looking For Something Else?
Search