Improved Bimetal Heatbreak All Metal Smooth TC4 Titanium Copper Throat Compatible with Anycubic Kobra 2, Mega S/Pro, Vyper, Chiron, Kobra Max/Plus, 4max pro 3D Printer Upgrade (Plated Heatbreak)
Asin: B0C626YNJG
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Inner Wall Of The Titanium Is Very Smooth Plus The Dlc Nano Coating So That The Filament Can Pass Through Very Smoothly And Stop Clogging. And We Use A Special Process To Hold Them Firmly Together. You Don't Need To Worry About It Being Damaged..
Packge: 1 Piece Improved Bi-Metal Heatbreak.
Note: We Found That Many Customers Do Not Know How To Properly Install The Nozzle. Remember The Core Issues In The Installation Process. Just Make Sure Your Nozzle And Heat Break Front End Are Tight And Sealed. Otherwise, The Melted Consumables Will Leak Along The Screw Holes..
Compatible With Anycubic Mega S / Pro, Vyper, Chiron, Kobra Max / Plus, 4Max Pro And Kobra 2 Series Like Kobra 2, Kobra 2 Neo, Kobra 2 Pro, Kobra 2 Plus, Kobra 2 Max 3D Printer.
It Is Named "Bi-Metal Heatbreak" It Has Two Components -Copper And Titanium Tc4 With Different Thermal Conductivity. Titanium Tc4 Reduces Heat Upward Conduction At The Heating Position, And Copper For Heat Dissipation To Accelerate Heat Conduction. And Can Reach Up To 500°C Degree.
Features
- This Heatbreak is improved with special Nano Coating called DLC, DLC Nano Coating not only has excellent wear resistance, but also has a very low friction coefficient and excellent corrosion resistance, with a generally smooth surface,better for filament feeding
- It is named Bi-Metal Heatbreak It has two components -Copper and Titanium TC4 with different thermal conductivity. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction. And Can reach up to 500 C degree
- The inner wall of the titanium is very smooth Plus the DLC nano coating so that the filament can pass through very smoothly and stop clogging. And We use a special process to hold them firmly together. You don't need to worry about it being damaged.
- Compatible with Anycubic Mega S / Pro, Vyper, Chiron, Kobra Max / PLUS, 4max pro and Kobra 2 series like Kobra 2, Kobra 2 Neo, Kobra 2 Pro, Kobra 2 Plus, Kobra 2 Max 3D Printer
- Packge: 1 piece improved Bi-metal heatbreak
- NOTE: We found that many customers do not know how to properly install the nozzle. Remember the core issues in the installation process. Just make sure your nozzle and HEAT BREAK front end are tight and sealed. Otherwise, the melted consumables will leak along the screw holes.
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Weight: 0.01 pounds
See On Amazon Similar To Improved Bimetal Heatbreak All Metal
#1
Creality Sprite Extruder Heater Block Kit Extra Thermistors High Temperature Pro 300 , Ender 3 S1 Hotend Compatible with Ender 3 S1 Pro/Ender 3 S1
Asin: B0BTWJ9ZTF | Model: Unido0205 | PartNumber: Unido0205 | Ean: 0783970029294 | UPC: 783970029294
【Extra Thermistors】The Package Includes Two Additional Upgraded Thermistors That Can Withstand Long-Term, High-Temperature Printing Up To 300 ℃, Improving The Stability And Reliability Of The Molding Process..
【Bimetal Heatbreak Throat Tube】Crafted From A Combination Of Tc4 Titanium Alloy And Copper, This Innovative Design Effectively Reduces Upward Heat Transfer (7 W/Mk) While Improving Heat Dissipation (400 W/Mk) For Stable, High-Quality 3D Printing..
【Nickel Copper Plated Nozzle】It Has Smooth Inner Hole And Outer Surface, Which Is More Smooth And Stable For Material Extrusion. It Can Be Applied To All Kinds Of Filament Materials Including Pla/ Tpu/ Petg/ Abs, Etc. The Maximum Working Temperature Is 500°..
【Professional Custom】Sprite Extruder Heater Block Kit Package Has 2 Extra Thermistors, Plated Chrome Copper & Titanium Alloy Throat Tube *1, Heater Block *1, Silicone Sock *1, Nickel-Plated Copper Nozzle *1 Compatible With Ender 3 S1/ Ender 3 S1 Pro/ Cr 10 Smart Pro. (When The Printing Temperature Is To Exceed 300 ℃, You Need To Remove The Silicone Sock In Advance)..
Features
- SPECIAL NOTE Please check the thermistor interface on the machine before purchasing (please see the illustration for details).CREALITY's latest Ender 3 S1 series has changed the thermistor interface, we only apply it to the older Ender 3 S1 series machines, so please check the interface before purchasing.
- Professional Custom Sprite Extruder Heater Block Kit Package has 2 Extra Thermistors, Plated chrome Copper & Titanium Alloy Throat Tube *1, Heater Block *1, Silicone Sock *1, Nickel-Plated Copper Nozzle *1 Compatible with Ender 3 S1/ Ender 3 S1 PRO/ CR 10 Smart Pro. (When the printing temperature is to exceed 300 , you need to remove the silicone sock in advance).
- Extra Thermistors The package includes two additional upgraded thermistors that can withstand long-term, high-temperature printing up to 300 , improving the stability and reliability of the molding process.
- Nickel Copper Plated Nozzle It has smooth inner hole and outer surface, which is more smooth and stable for material extrusion. It can be applied to all kinds of filament materials including PLA/ TPU/ PETG/ ABS, etc. The maximum working temperature is 500 .
- Bimetal Heatbreak Throat Tube Crafted from a combination of TC4 titanium alloy and copper, this innovative design effectively reduces upward heat transfer (7 W/mK) while improving heat dissipation (400 W/mK) for stable, high-quality 3D printing.
- See more on Amazon...
Brand: UNIDO | Manufacturer: Unido
See On Amazon #2
Creality Official Sprite Extruder Upgrade Heater Block Kit High Temperature Pro 300 Titanium Heatbreak Plated Copper Nozzle Compatible with Creality Ender 3 S1/Ender3 S1 Pro/CR10 Smart Pro
Asin: B0B2DN5SKD | Model: AMUS-LD-AC-S1-Hotend-GW-PRO | PartNumber: AMUS-LD-AC-S1-Hotend-GW-PRO
Nickel Copper Plated Nozzle 0.4Mm - It Has Smooth Inner Hole And Outer Surface, Which Is More Smooth And Stable For Material Extrusion. It Can Be Applied To All Kinds Of Materials. The Maximum Working Temperature Is 500°..
After-Sales Service - There Are More Than 20 Engineers For After-Sales Service And Provide 24/7 Customer Service With 1-Year Limited And Lifetime Technical Assistance. Please Contact Us Via “Ask A Question”Directly To Get The Professional Assistance..
Nickel Plated Copper Heater Block - Copper Has More Than 3X The Thermal Conductivity Of Brass, And The Copper Alloy We Use Has Been Hardened And Treated To Reduce The Oxidation That Occurs In Copper At High Temperatures. The Higher Thermal Conductivity Also Slightly Increase Your Heat-Up Times, And Provide Highter Temperature Control,Reach Up To 500°C, Making It Perfect For The High-Temperature Printing..
Bimetal Heatbreak Throat Tube - Using Tc4 Titanium Alloy And Copper Two Kinds Of Metal Processing, Titanium Alloy Has Good Thermal Insulation, Copper To Help Heat Dissipation.For A Long Time Of Printing Has An Obvious Role In Improving The Quality Of Printing..
Features
- Package include - Plated chrome Copper & Titanium Alloy Throat Tube x1, Heating Block x1, Silicone sock x1, Nickel Copper plated nozzle x1 (if your printing temperature is over300C, please remove the silicone sock before printing). Compatible with Ender 3 S1/Ender 3 S1 PRO/CR 10 Smart Pro.
- Bimetal Heatbreak Throat Tube - Using TC4 titanium alloy and copper two kinds of metal processing, titanium alloy has good thermal insulation, copper to help heat dissipation.For a long time of printing has an obvious role in improving the quality of printing.
- Nickel Copper plated nozzle 0.4mm - It has smooth inner hole and outer surface, which is more smooth and stable for material extrusion. It can be applied to all kinds of materials. The maximum working temperature is 500 .
- Nickel plated copper Heater block - Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity also slightly increase your heat-up times, and provide highter temperature control,Reach up to 500 C, making it perfect for the high-temperature printing.
- After-sales Service - There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-year limited and lifetime technical assistance. Please contact us via ask a question directly to get the professional assistance.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #3
POLISI3D Upgrade CR6 SE All Metal Bimetal Heatbreak Copper Titanium TC4 Throat for Creality Ender 3 V2 Neo / Ender3 Neo/CR-6 SE/Max/CR-5 PRO CR10 Smart 3D Printer (Bimetallic)
Asin: B09BB99MC7 | Model: CR-6 SE Upgrade heatbreak | PartNumber: CR-6 SE Upgrade heatbreak
It Is Named "Bi-Metal Heatbreak" It Has Two Components With Different Thermal Conductivity. It Is Composed Of 2 Parts. We Use A Special Process To Hold Them Firmly Together. You Don't Need To Worry About It Being Damaged..
Packge: 1 Piece Upgrade Bi-Metal Heatbreak.
Compatible With Creality Cr-6 Se, Cr-6 Max, Cr-5 Pro， Cr10 Smart, Ender 3 Neo, Ender 3 V2 Neo, Ender 3 Max Neo 3D Printer.
Bi-Metal Heatbreak Melts Filament Faster , The Inner Wall Of The Titanium Is Very Smooth So That The Filament Can Pass Through And Reduce Clogging..
Features
- This Heatbtreak is made from two components, Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.
- Bi-Metal Heatbreak melts filament faster , The inner wall of the titanium is very smooth so that the filament can pass through and reduce clogging.
- It is named Bi-Metal Heatbreak It has two components with different thermal conductivity. It is composed of 2 parts. We use a special process to hold them firmly together. You don't need to worry about it being damaged.
- Compatible with Creality CR-6 SE, CR-6 Max, CR-5 PRO CR10 Smart, Ender 3 Neo, Ender 3 V2 Neo, Ender 3 Max Neo 3D Printer
- Packge: 1 piece Upgrade Bi-metal heatbreak
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
See On Amazon #4
POLISI3D Improved Nano Coated Ender 3 V2 Bimetallic Heat Break CR10 Bimetal Heatbreak Compatible with Creality Ender3 pro/Ender 5 Pro Plus / CR10 V2 V3 S4 S5, Neptune 3 Pro / 4 Pro 3D Printer Upgrade
Asin: B0C5VSK1V8 | Model: DLC CR10 heatbreak | PartNumber: DLC CR10 heatbreak
This Heatbtreak Is Made From Two Components, Copper And Titanium Tc4. Titanium Tc4 Reduces Heat Upward Conduction At The Heating Position, And Copper For Heat Dissipation To Accelerate Heat Conduction..
Compatible With Creality Ender 3 / Ender 3 Pro/Ender 3 V2 / Ender 5 /Ender 5 Pro / Ender 5 Plus , Cr10 / Cr10 V2 / V3 /S4 /S5 / Cr10s 3D Printers And Neptune 3 /3 Pro /4 /4 Pro 3D Printer, (But Not For Cr10s Pro, Please Know Before Ordering) ..
The Inner Wall Of The Titanium Is Very Smooth Plus The Dlc Nano Coating So That The Filament Can Pass Through Very Smoothly And Stop Clogging..
It Is Named "Bi-Metal Heatbreak" It Has Two Components With Different Thermal Conductivity. It Is Composed Of 2 Parts. We Use A Special Process To Hold Them Firmly Together. You Don't Need To Worry About It Being Damaged..
Features
- This Heatbreak is improved with special Nano Coating called DLC, DLC Nano Coating not only has excellent wear resistance, but also has a very low friction coefficient and excellent corrosion resistance, with a generally smooth surface,better for filament feeding
- It is named Bi-Metal Heatbreak It has two components with different thermal conductivity. It is composed of 2 parts. We use a special process to hold them firmly together. You don't need to worry about it being damaged.
- This Heatbtreak is made from two components, Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.
- The inner wall of the titanium is very smooth Plus the DLC nano coating so that the filament can pass through very smoothly and stop clogging.
- Compatible with Creality Ender 3 / Ender 3 pro/Ender 3 V2 / Ender 5 /Ender 5 Pro / Ender 5 Plus , CR10 / CR10 V2 / V3 /S4 /S5 / CR10S 3D Printers and Neptune 3 /3 pro /4 /4 pro 3D printer, (But NOT for CR10S PRO, please know before ordering) .
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Dimensions: 1.08 x 0.28 x 0.28 Inches | Weight: 0.01 Pounds
See On Amazon #5
Creality Official CR-10 SE Ceramic Heating Black Kit, 60W Fast Heating Wear-Resistant Hotend Kit Supports 300 C High Temperature with Copper+Titanium Alloy Throat Tube and Hardened Steel Nozzle
Asin: B0CNLCNJSK
【High Speed, High Flow】- The Hot Melt Section Length Increased By 30%, The Cr-10 Se Hotend Supports 600Mm/S High-Speed And 32Mm³/S High Flow Printing..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【All-Metal Design】- The Cr-10 Se Heating Block Kit Is All Metal Design, More Powerful Overall Performance And More Resistant To High Temperature. Support 300℃ High Temperature Printing, Compatible With More Filaments Such As Hyper Pla, Pla, Asa, Petg, Tpu, Pa, Pc, Pla-Cf, Pa-Cf, Pet-Cf, Etc..
【60W Ceramic Heating】- Poweful 60W Ceramic Heating Ring Improves Heating Efficiency, More Uniform Heating And Faster Heat Transfer. Only Takes 40 Seconds To Heat Up To 300℃. Fully Melt Various Filaments To Make The Quality Of Printed Works Better..
Features
- Original Quality - 100% Creality Official CR-10 SE ceramic heating block kit, providing high-speed and high-quality printing. Bi-metal (copper+titanium alloy throat tube) heatbreak, great to prevent thermal creep. The nozzle is made of hardened steel, which is wear-resistant.
- 60W Ceramic Heating - Poweful 60W ceramic heating ring improves heating efficiency, more uniform heating and faster heat transfer. Only takes 40 seconds to heat up to 300 . Fully melt various filaments to make the quality of printed works better.
- High Speed, High Flow - The hot melt section length increased by 30%, the CR-10 SE hotend supports 600mm/s high-speed and 32mm /s high flow printing.
- All-metal Design - The CR-10 SE heating block kit is all metal design, more powerful overall performance and more resistant to high temperature. Support 300 high temperature printing, compatible with more filaments such as Hyper PLA, PLA, ASA, PETG, TPU, PA, PC, PLA-CF, PA-CF, PET-CF, etc.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #6
Sprite Extruder Upgrade Heater Block Kit for Creality, Ender 3 S1 Pro Hotend with 5 Copper Plated Nozzles and 4 Silicone Socks, Fit for Ender 3 S1, Ender 3 S1 Pro, CR10 Smart Pro
Asin: B0C6WYHXQV | Model: XA018a | PartNumber: XA018a
0.4Mm Copper Plated Nozzle: It Has Smooth Inner Hole And Outer Surface, Which Is More Smooth And Stable For Material Extrusion. It Can Be Applied To All Kinds Of Materials. The Maximum Working Temperature Is 300°..
Worry-Free Purchase: During Use, If You Have Any Questions, Please Contact Us, We Will Reply You Within 24 Hours..
Package Includes: You Will Receive 1 X Bimetal Heat Break Throat Tube, 1 X Aluminum Alloy Heating Block, 4 X Silicone Socks, 5 X Copper Plated Nozzles, 2 X Hexagon Socket Screws, 1 X Machine Screw, 1 X Heating Rod And Thermal Sensor..
Bimetal Heatbreak Throat Tube: Using Titanium Alloy And Copper Processing, Titanium Alloy Has Good Thermal Insulation, Copper To Help Heat Dissipation. Greatly Improve The Print Quality During A Long-Term Printing..
Features
- Professional Design: This is the upgrade heating block kit for Creality sprite extruder, compatible with Ender 3 S1, Ender 3 S1 pro, CR10 Smart pro 3D printer.
- Bimetal Heatbreak Throat Tube: Using titanium alloy and copper processing, titanium alloy has good thermal insulation, copper to help heat dissipation. Greatly improve the print quality during a long-term printing.
- 0.4mm Copper Plated Nozzle: It has smooth inner hole and outer surface, which is more smooth and stable for material extrusion. It can be applied to all kinds of materials. The maximum working temperature is 300 .
- Package Includes: You will receive 1 x bimetal heat break throat tube, 1 x aluminum alloy heating block, 4 x silicone socks, 5 x copper plated nozzles, 2 x hexagon socket screws, 1 x machine screw, 1 x heating rod and thermal sensor.
- Worry-free purchase: During use, if you have any questions, please contact us, we will reply you within 24 hours.
- See more on Amazon...
Brand: XINHNMUU | Manufacturer: XINHNMUU
See On Amazon #7
2pcs All Metal Ender 3 Titanium Heat Break Thermal Barrel Tube Heatbreak Upgrade for Creality 3D Printer CR10,S4 S5, CR10S, Ender3 V2, Ender 3 pro, CS3 Hotend use (Upgrade TC4 All Metal Version)
Asin: B08TCD4M1S | Model: cr10 Heatbreak | PartNumber: cr10 Heatbreak | Ean: 0791548327291 | UPC: 791548327291
There Is Od7mm Sidewall Between The Neck And Threaded Part, Which Can Fix The Heatbreak And Nozzle More Stable; Sidewall With Two Cutout Is Convenient For You To Use A 6Mm Wrentch To Screw The Heatbreak Out From The Heater Block..
This Is All Metal Type, You Can Use It To Print Very High Temperature Printing..
Used For Orginal Creality 3D Printer Cr10,S4 S5, Cr10s, Ender 3 Series, Ender-3 Pro, Cs3 Hotend Use; If You Wanna Use This Heatbreak To Other Printers, Please Check Our Drawings Before Ordering..
These Heatbreaks Is Made From Titanium Alloy Tc4 To Provide Excellent Thermal Isolation Between Heater And Cooling Block. Titanium Is Extremely Strong Material And Offers Almost 3X Lower Thermal Conductivity Than Stainless Steel, Creating More Defined Meltzone..
Features
- This Heatsink with ID2.0mm Neck is to solve the heat-creep issues. It would be better if you can apply some thermal paste to properly fit the heatbreak into the CR10 orginal heatsink. Please Make sure that there is no gap between the heatsink and the heat breaker
- These heatbreaks is made from Titanium Alloy TC4 to provide excellent thermal isolation between heater and cooling block. Titanium is extremely strong material and offers almost 3x lower thermal conductivity than stainless steel, creating more defined meltzone.
- There is OD7mm Sidewall between the neck and threaded part, which can fix the heatbreak and nozzle more stable; Sidewall with two cutout is convenient for you to use a 6mm wrentch to screw the heatbreak out from the heater block.
- Used for orginal Creality 3D Printer CR10,S4 S5, CR10S, Ender 3 Series, ender-3 pro, CS3 Hotend use; If you wanna use this heatbreak to other printers, please check our drawings before ordering.
- This is All metal type, you can use it to print very high temperature printing.
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
See On Amazon #8
POLISI3D All Metal Bimetal Heatbreak Copper Titanium TC4 Throat High Temperature for Creality 3D Printer CR10 V3 S4 S5 Ender 3 V2 Ender3 pro Ender 5 CS3 Hotend Upgrade
Asin: B0971FNCM4 | Model: Bimetal upgrade heatbreak for Ender | PartNumber: Bimetal upgrade heatbreak for Ender
The Inner Wall Of The Titanium Is Very Smooth So That The Filament Can Pass Through And Reduce Clogging..
The Total Length Is 27.5Mm, Compatible With Creality Printer Upgrade Cr10 V3 S4 S5 Ender 3 V2 Ender3 Pro Ender 5 Cs3 Hotend.
This Heatbtreak Is Made From Two Components, Copper And Titanium Tc4. Titanium Tc4 Reduces Heat Upward Conduction At The Heating Position, And Copper For Heat Dissipation To Accelerate Heat Conduction..
Features
- It is named "Bi-Metal Heatbreak" It has two components with different thermal conductivity. It is composed of 2 parts. We use a special process to hold them firmly together. You don't need to worry about it being damaged.
- This Heatbtreak is made from two components, Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.
- The inner wall of the titanium is very smooth so that the filament can pass through and reduce clogging.
- The total length is 27.5mm, Compatible with Creality Printer Upgrade CR10 V3 S4 S5 Ender 3 V2 Ender3 pro Ender 5 CS3 Hotend
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Weight: 0.07 Pounds
See On Amazon #9
Slice Engineering Copperhead C-E Bimetallic Heat Break for Creality Ender 3 / Ender 5 / CR-10 / CR10 / CR10S Printers - Stop Clogging - Improve Resolution - Eliminate Heat Creep - Made in The USA
Asin: B09RX4LDZD | Model: P-CHB-RE-0091-CEZ | PartNumber: P-CHB-RE-0091-CEZ | Ean: 0850005423799 | UPC: 850005423799
✔️ [Eliminates Heat Creep] – Improve Resolution, Stop Clogging, And Prevent Failed Prints From Happening By Using This Bimetallic Heat Break That Conducts 60% Less Heat Than A Standard Threaded Heat Break!.
✔️ [Slice’S Guarantee] - Slice Engineering Is A Usa Based Company. All Of Our Products Are Tested By Our In-House Engineering Team, Carry A Limited Lifetime Warranty Against Manufacturing Defects, And Are Supported By Our Knowledgeable Engineering Staff. Be Confident That We Stand By Our Products!.
Creality And Ender Are Registered Trademarks Of Shenzhen Creality 3D Technology Co, Ltd. Slice Engineering, Llc Is Not Affiliated With Nor Endorsed By Shenzhen Creality 3D Technology Co, Ltd..
✔️ [450°C Temperature Rating] – With A Temperature Rating This High, Our Copperhead Heatbreak Upgrade Will Allow You To Print Virtually Any Available Printable Thermoplastic (Asa, Pc, Peek, Pei, Etc.)!.
✔️ [Plug And Play] – Simply Uninstall Your Stock Heat Break, Install Our Copperhead Heat Break, And Start Printing Away!.
Features
- [BEST CREALITY UPGRADE] - This bimetallic heat break upgrade was specifically designed to fit the following printers: Creality Ender 3 | Ender 3 V2 | Ender 3 Pro | Ender 5 | Ender 5 Plus | Ender 5 Pro | Ender 6 | CR-10 V1 | CR-10 Mini | CR-10S/S4/S5
- [PLUG AND PLAY] Simply uninstall your stock heat break, install our Copperhead Heat Break, and start printing away!
- [ELIMINATES HEAT CREEP] Improve resolution, stop clogging, and prevent failed prints from happening by using this bimetallic heat break that conducts 60% less heat than a standard threaded heat break!
- [450 C TEMPERATURE RATING] With a temperature rating this high, our Copperhead Heatbreak Upgrade will allow you to print virtually any available printable thermoplastic (ASA, PC, PEEK, PEI, etc.)!
- [Slice s Guarantee] - Slice Engineering is a USA based company. All of our products are tested by our in-house engineering team, carry a limited lifetime warranty against manufacturing defects, and are supported by our knowledgeable engineering staff. Be confident that we stand by our products!
- Creality and Ender are registered trademarks of Shenzhen Creality 3D Technology Co, Ltd. Slice Engineering, LLC is not affiliated with nor endorsed by Shenzhen Creality 3D Technology Co, Ltd.
- See more on Amazon...
Brand: Slice Engineering | Manufacturer: Slice Engineering
Dimensions: 0.98 x 3.74 x 2.01 Inches
Warranty: Lifetime warranty against manufacturing defects
See On Amazon #10
Official Creality Sprite Extruder Heater Block Upgrade Kit, Bimetal Copper Titanium Heatbreak Plated Copper Nozzle,300 High Temperature Pro,Fit for Ender 3 S1,S1 Pro, CR-10 Smart Pro
Asin: B0C1N7HWNM
【Bimetal Heatbreak Throat Tube】- Using Tc4 Titanium Alloy And Copper Two Kinds Of Metal Processing, Titanium Alloy Has Good Thermal Insulation, Copper To Help Heat Dissipation.For A Long Time Of Printing Has An Obvious Role In Improving The Quality Of Printing..
【100% Satisfaction Service】- We Provide Lifetime Professional Technical Supports,If You Have Any Problems During Installation And Use, Please Feel Free To Contact Us, We Would Reply You Within 24 Hours..
【Package Include】- Plated Chrome Copper & Titanium Alloy Throat Tube X1, Heating Block X1, Silicone Sock X1, Nickel Copper Plated Nozzle X1 (If Your Printing Temperature Is Over300c, Please Remove The Silicone Sock Before Printing)..
【Nickel Copper Plated Nozzle】- It Has Smooth Inner Hole And Outer Surface, Which Is More Smooth And Stable For Material Extrusion. It Can Be Applied To All Kinds Of Materials, Such As Abs, Nylon, Peek, Etc., The Maximum Working Temperature Is 500°..
Features
- Especially for Sprite Extruder - This upgrade heater block compatible with installed sprite extruder 3d printer, such as Ender 3 S1, Ender 3 S1 pro, CR10 Smart pro, Sermoon V1, Sermoon V1 Pro.
- Nickel Copper Plated Nozzle - It has smooth inner hole and outer surface, which is more smooth and stable for material extrusion. It can be applied to all kinds of materials, such as ABS, nylon, PEEK, etc., The maximum working temperature is 500 .
- Bimetal Heatbreak Throat Tube - Using TC4 titanium alloy and copper two kinds of metal processing, titanium alloy has good thermal insulation, copper to help heat dissipation.For a long time of printing has an obvious role in improving the quality of printing.
- Package include - Plated chrome Copper & Titanium Alloy Throat Tube x1, Heating Block x1, Silicone sock x1, Nickel Copper plated nozzle x1 (if your printing temperature is over300C, please remove the silicone sock before printing).
- 100% Satisfaction Service - We provide lifetime professional technical supports,If you have any problems during installation and use, please feel free to contact us, we would reply you within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #11
BIQU H2 V2S Dual Gear Extruder Upgrade H2 Extruder 3D Printer Direct Extruder 1.75mm Filament BIQU BX Creality Ender & CR Series Printers, Anycubic Mega S, Geeetech Printers and Prusa I3 DIY Kits
Asin: B09FZ5S63R | Model: H2 extruder V2 | PartNumber: H2 extruder V2
💙Dual Gear Feeding: H2 V2s Extruder, Powerful Extrusion System, Dual Gear And A Gear Ratio Of 7:1 For Exceptional Pushing Force, 770N Extrusion Force, Ensuring Smooth Feeding And Giving Snappy Retractions..
💙High Temperature Print & Good Printing Experience: Bi-Metal Heatbreak Enables High-Temp Printing At 270℃ With Silicone Sock For Insulation.Accurate Movements/Higher Movement Speed /Better Print Detail, Its Young And Personalized Design Is Also Enough To Catch The Attention Of Most 3D Enthusiasts.
💙Efficient Heat Dissipation & More Mounting Holes: The Lightweight And Wear-Resistant Aluminum Alloy Housing, High Thermal Conductivity Heat Sinks, And Fan Realize A Better Heat Dissipation.4 Screw Mounting Holes Are Available For Installing An Auto Leveling Sensor/Cooling Fan, Which Can Achieve More Function..
💙Adjustable Filament Loading Tension: Simply Rotate The Tension Screw To Accommodate Different Filaments, Improve The Printing Success Rate, Improve The Printing Performance Of Flexible Filaments, Compatible With Most Filaments On The Market, Such As: Abs/Pla/Pva/Hips/Pet/ Pet Etc..
Features
- Lightweight & Wide Compatibility: BQIU H2 V2S, 195g lightweight design, smaller inertia, more accurate positioning, higher printing accuracy, than the ordinary 300g extruder on the market. 34% lighter at launch. Widely compatible with BIQU B1, BIQU BX, Ender-3, Voron2.4, Voron V0, Vzbot 3d printer, etc.
- Adjustable Filament Loading Tension: Simply rotate the tension screw to accommodate different filaments, improve the printing success rate, improve the printing performance of flexible filaments, compatible with most filaments on the market, such as: ABS/PLA/PVA/HIPS/PET/ PET etc.
- Dual Gear Feeding: H2 V2S extruder, powerful extrusion system, dual gear and a gear ratio of 7:1 for exceptional pushing force, 770N extrusion force, ensuring smooth feeding and giving snappy retractions.
- Efficient Heat Dissipation & More Mounting Holes: The lightweight and wear-resistant aluminum alloy housing, high thermal conductivity heat sinks, and fan realize a better heat dissipation.4 screw mounting holes are available for installing an auto leveling sensor/cooling fan, which can achieve more Function.
- High Temperature Print & Good Printing Experience: Bi-metal heatbreak enables high-temp printing at 270 with silicone sock for insulation.Accurate Movements/Higher Movement Speed /Better Print Detail, Its young and personalized design is also enough to catch the attention of most 3D enthusiasts
- See more on Amazon...
Brand: BIQU | Manufacturer: BIGTREETECH
Dimensions: 1.49 x 3.02 x 2.95 inches | Weight: 0.47 pounds
See On Amazon #12
ChowThink Armour V2.0 Direct Drive Extruder with All Metal Structure and Hardened Steel Gear,Dual Gear, Ceramic Heating Block,DLC Nano Coated Bimetal Heatbreak for Ender3,Ender3 V2,Ender3 pro Upgrades
Asin: B0CNLJKX2H | Ean: 6973880790702
【Ceramic Heating Block,E3d V6 Nozzle】Heating Ring Design Can Improve Heating Efficiency And Thermal Stability, 60W Heating Power Heating Speed Is Very Fast, And With All Copper Heating Block, There Is Better Heat Conductivity. Can Better Cooperate With High-Speed Printing.Built-In 300℃ Thermistor.Use E3d V6 Nozzle, Good Compatibility..
【Optimization Design,Easy To Install】 Transparent Window Design, Easy To Observe The Internal Operation; One Key Opening And Closing, Convenient Refuelling, While Easy To Clean The Interior.Easy To Install For The Ender3 Ender3 V2,Ender 3 Pro,Ender 3 Neo..
【Dlc Nano Coated Bimetal Heatbreak】This Heatbtreak Is Made From Two Components, Copper And Titanium Tc4. Using The Different Thermal Conductivity Characteristics Of The Two Metals.The Two Metals Are Bonded Using The Interference Fitting Process.The Surface Is Coated With Dlc Nano Coated, The Inner Wall Is Very Smooth.Suitable For Printing In Various Temperatures And Materials..
【Reduction Ratio 5:1】 Torque Amplification, Reduction Ratio 5:1, Large Extrusion Force Reduce Clogging.Hand Self Integration, With Manual Knob, Refuelling Debugging Can Be Manually Withdrawn；Extrusion Wheel Pressure Can Be Adjusted To Cope With Different Material( Pla, Petg, Abs, Tpu, Asa, Nylon, And Polycarbonate...)1.75Mm Filament..
Features
- Center of gravity back design,All metal The motor is designed above the X axis, so that the overall center of gravity is backward, and the influence of deflection torque on movement is reduced.All metal body, hardened steel reduction gear and extrusion dual gear, all Metal Structure,metel fan,metal handle, two metal knob nut,good texture, good durability.
- Reduction ratio 5:1 Torque amplification, reduction ratio 5:1, large extrusion force Reduce clogging.Hand self integration, with manual knob, refuelling debugging can be manually withdrawn extrusion wheel pressure can be adjusted to cope with different material( PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate...)1.75mm filament.
- Ceramic Heating Block,E3D V6 Nozzle Heating ring design can improve heating efficiency and thermal stability, 60W heating power heating speed is very fast, and with all copper heating block, there is better heat conductivity. Can better cooperate with high-speed printing.Built-in 300 thermistor.Use E3D V6 nozzle, good compatibility.
- DLC Nano Coated Bimetal Heatbreak This Heatbtreak is made from two components, Copper and Titanium TC4. Using the different thermal conductivity characteristics of the two metals.The two metals are bonded using the Interference fitting process.The surface is coated with DLC Nano Coated, the inner wall is very smooth.Suitable for printing in various temperatures and materials.
- Optimization design,Easy to install Transparent window design, easy to observe the internal operation; One key opening and closing, convenient refuelling, while easy to clean the interior.Easy to install for the ender3 ender3 v2,ender 3 pro,ender 3 neo.
- See more on Amazon...
Brand: ChowThink | Manufacturer: ChowThink
See On Amazon #13
AEDIKO 2pcs Smooth Heatbreak Upgrade All Metal Titanium and Copper Bimetal Throat Nozzle for Ender 3 V2 Ender 3 Pro CR10 3D Printer Hotend
Asin: B09W4Q8ZYF | Model: 19730 | PartNumber: 19730 | Ean: 0701715525214 | UPC: 701715525214
Bimetal Material Advantage: The All Metal Heat Break Is Made Of Titanium Alloy And Copper .Titanium Alloy Is Used To Reduce Heat Conduction Upward From The Heating Block And Gold-Plated Copper Is Used To Accelerate Heat Conduction.
All-Metal Heat Break Advantages: All Metal Heat Break Works Well With High-Temp Filaments. High Temperature Resistance,Integrated Design Refused To Jamming And Improve Printing Efficiency.
Easy Installation: This Throat Nozzle Can Be Replace For Your Ender 3 And Cr10 3D Printers Directly.
High Quality: Thermal Heat Break Is Made From High Quality Titanium Alloy + Plated Copper,Real Bimetal Material ,Combined With 2 Components To Provide Excellent Thermal Isolation Between Heater And Cooling Block.
Features
- Application: The Bimetal Titanium Heat Break is Compatible with Ender 3 V2,Ender 3 Pro,Ender 3 CR10 Series 3D Printer
- High Quality: Thermal Heat Break is Made From High Quality Titanium Alloy + Plated Copper,Real Bimetal Material ,Combined with 2 Components to Provide Excellent Thermal Isolation Between Heater and Cooling Block
- Bimetal Material Advantage: The All Metal Heat Break is Made of Titanium Alloy and Copper .Titanium Alloy is Used to Reduce Heat Conduction Upward From the Heating Block and Gold-Plated Copper is Used to Accelerate Heat Conduction
- Easy Installation: This Throat Nozzle Can Be Replace for your Ender 3 and CR10 3D Printers Directly
- All-Metal Heat Break Advantages: All Metal Heat Break Works Well With High-Temp Filaments. High Temperature Resistance,Integrated Design Refused to Jamming and Improve Printing Efficiency
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
See On Amazon #14
DIANN 4pcs All Metal Bimetal Heatbreak Copper Titanium TC4 Throat High Temperature for Creality 3D Printer CR10 Hotend
Asin: B0B6P6P83S | Model: DI09528 | PartNumber: DI09528 | Ean: 0701715526891 | UPC: 701715526891
Bimetal Material Advantage:The All Metal Heatbreak Is Made Of Titanium Alloy And Copper .Titanium Alloy Is Used To Reduce Heat Conduction And Gold-Plated Copper Is Used To Accelerate Heat Conduction.
Application:Total Length Of Heatbreak Is 27.5Mm With M6 Screw Thread,Suitable For Creality 3D Printer Upgrade Cr10 S4 S5 Ender 3 V2 Ender3 Pro Ender 5 Cs3 Hotends.
Easy To Install: This Heatbreak Throat Cut Is Smooth And Flat Without Any Burrs,Could Be Seamlessly Connected With Nozzle, No Risk Of Filament Leakage,Very Convenient To Install.
1.75Mm Filament:The Inner Hole Finish Is 0.3 And The Torque Is More Than 10Kg, Could Print 1.75Mm Filament Fast And Safely.
Features
- High Temperature Resistance:This 3D Printer Throat Tube is Made of All-Metal Material, Precision-Machined, High Temperature Resistance Up to 420
- 1.75mm Filament:The Inner Hole Finish is 0.3 and the Torque is More Than 10kg, Could Print 1.75mm Filament Fast and Safely
- Bimetal Material Advantage:The All Metal Heatbreak is Made of Titanium Alloy and Copper .Titanium Alloy is Used to Reduce Heat Conduction and Gold-Plated Copper is Used to Accelerate Heat Conduction
- Easy to Install: This Heatbreak Throat Cut is Smooth and Flat Without Any Burrs,Could Be Seamlessly Connected With Nozzle, No Risk of Filament Leakage,Very Convenient to Install
- Application:Total Length of Heatbreak is 27.5mm with M6 Screw Thread,Suitable for Creality 3D Printer Upgrade CR10 S4 S5 Ender 3 V2 Ender3 PRO Ender 5 CS3 Hotends
- See more on Amazon...
Brand: DIANN | Manufacturer: DIANN
See On Amazon #15
ACROSSXD Sprite Extruder Upgrade Heater Block Kit High Temperature Pro 300 Titanium Heatbreak Plated Copper Nozzle Compatible with Creality Ender 3 S1/Ender3 S1 Pro/CR10 Smart Pro
Asin: B0CDCM3Q4Z | Model: HT-02 | PartNumber: HT-02
【Nickel Copper Plated Nozzle】It Has Smooth Inner Hole And Outer Surface, Which Is More Smooth And Stable For Material Extrusion. It Can Be Applied To All Kinds Of Materials, Such As Abs, Nylon, Peek, Etc., The Maximum Working Temperature Is 500°..
【Customized For Sprite Extruder】This Heater Block Is An Upgrade For Creality Sprite Extruder, Compatible With Fdm 3D Printers Equipped With Sprite Extruder Like Ender 3 S1, Ender 3 S1 Pro, Cr10 Smart Pro, Sermoon V1, Sermoon V1 Pro 3D Printer..
【Premium Preformance】High Strength-Good Comprehensive Mechanical Propertoes Tensile Strength：1.012Gpa; Highly Polished-Ra<0.4 Roughness Inner Wall Enhances The Fluidity Of Filament..
【Bimetal Heatbreak Throat Tube 】- Using Tc4 Titanium Alloy And Copper Two Kinds Of Metal Processing, Titanium Alloy Has Good Thermal Insulation, Copper To Help Heat Dissipation.For A Long Time Of Printing Has An Obvious Role In Improving The Quality Of Printing..
Features
- Package include Plated chrome Copper & Titanium Alloy Throat Tube x1,Copper-plated heating block x1, Silicone sock x1, Nickel Copper plated nozzle x1, 0.4mm MK nozzle x 5, silicone sock x 5. (if your printing temperature is over300C, please remove the silicone sock before printing). Compatible with Ender 3 S1/Ender 3 S1 PRO/CR 10 Smart Pro.
- Bimetal Heatbreak Throat Tube - Using TC4 titanium alloy and copper two kinds of metal processing, titanium alloy has good thermal insulation, copper to help heat dissipation.For a long time of printing has an obvious role in improving the quality of printing.
- Nickel Copper Plated Nozzle It has smooth inner hole and outer surface, which is more smooth and stable for material extrusion. It can be applied to all kinds of materials, such as ABS, nylon, PEEK, etc., The maximum working temperature is 500 .
- Premium Preformance High Strength-Good comprehensive mechanical propertoes Tensile strength 1.012GPa; Highly Polished-Ra<0.4 roughness inner wall enhances the fluidity of filament.
- Customized for Sprite Extruder This heater block is an upgrade for Creality sprite extruder, compatible with FDM 3D printers equipped with sprite extruder like Ender 3 S1, Ender 3 S1 pro, CR10 Smart pro, Sermoon V1, Sermoon V1 Pro 3D Printer.
- See more on Amazon...
Brand: ACROSSXD | Manufacturer: ACROSSXD
See On Amazon #16
Improved Nano Coating Sprite Extruder Pro Bimetallic Heatbreak for K1 K1 Max, Ender 3 V3 SE, Ender 3 S1, Ender3 S1 Pro/Plus, CR10 Smart Pro, Ender 5 S1 3D Printer (BiMetal Tube)
Asin: B0C5XKPD5J
This Heatbtreak Is Made From Two Components, Copper And Titanium Tc4. Titanium Tc4 Reduces Heat Upward Conduction At The Heating Position, And Copper For Heat Dissipation To Accelerate Heat Conduction..
Compatible With Ender 3 V3 Se, K1, K1 Max 3D Printer And The 3D Printers Which Is Equiped With Sprite Extruder Or Sprite Extruder Pro, Like Ender 3 S1, Ender3 S1 Pro / Ender 3 S1 Plus, Cr10 Smart Pro, Sermoon V1, Sermoon V1 Pro And Ender 5 S1 3D Printer.
The Inner Wall Of The Titanium Is Very Smooth Plus The Dlc Nano Coating So That The Filament Can Pass Through Very Smoothly And Stop Clogging..
It Is Named "Bi-Metal Heatbreak" It Has Two Components With Different Thermal Conductivity. It Is Composed Of 2 Parts. We Use A Special Process To Hold Them Firmly Together. You Don't Need To Worry About It Being Damaged..
Features
- This Heatbreak is improved with special Nano Coating called DLC, it not only has excellent wear resistance, but also has a very low friction coefficient and excellent corrosion resistance, with a generally smooth surface,better for filament feeding
- It is named Bi-Metal Heatbreak It has two components with different thermal conductivity. It is composed of 2 parts. We use a special process to hold them firmly together. You don't need to worry about it being damaged.
- This Heatbtreak is made from two components, Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.
- The inner wall of the titanium is very smooth Plus the DLC nano coating so that the filament can pass through very smoothly and stop clogging.
- Compatible with Ender 3 V3 SE, K1, K1 MAX 3D Printer and the 3D printers which is equiped with Sprite extruder or Sprite extruder pro, like Ender 3 S1, Ender3 S1 Pro / Ender 3 S1 PLUS, CR10 Smart Pro, Sermoon V1, Sermoon V1 Pro and Ender 5 S1 3D Printer
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Weight: 0.01 pounds
See On Amazon #17
Newwish Sidewinder X1 BiMetal Heatbreak Upgrade All Metal Copper+Titanium Alloy Bi-Metal Heat Break for Sidewinder X1 X2,Genius Pro,Kraken Chimera +,Cyclops Plus Muti Color Hotend.(2PCS)
Asin: B0CPTC22YS | Ean: 0747086468002 | UPC: 747086468002
Prevents Clogs And Leaks: Compared To Competitive Products, The Inner Wall Of The Tube Is Smoother And Burr-Free. (Reduces The Chance Of Filament Clogging). The Interface Is Smoother And More Precise.(It Can Effectively Prevent Filament Leakage)..
Prevent Thermal Creep: This Structure Can Reduce The Temperature Fluctuation Of The Hotend And Make The Hotend More Stable And Reliable So As To Reduce The Occurrence Of Thermal Creep To Improve The Printing Quality And Can Effectively Prevent The Clogging Problem Caused By Thermal Creep..
Improve Printing Efficiency: 450℃-Rated Bi-Metal Heatbreak Melts Filament Faster And Conducts 60% Less Heat Across The Break Zone Than Standard Heatbreak,Which Reduce Heat Loss, Greatly Improve Printing Efficiency..
Heat Insulation Good: Titanium Alloy Reduces Heat Upward Conduction At The Heating Position, And Copper For Heat Dissipation To Accelerate Heat Conduction.High Overall Heat Insulation Performance,High Temperature Resistance, High Wear Resistance, High Hardness And Long Service Life..
Features
- Bi-Metal Structure: This is a branch design of the bimetal Heatbreak. The front end of the Sidewinder X1 Bi-Metal Heatbreak is made of high-quality GRADE5 titanium alloy and the rear end is made of copper alloy material. We use a special process to hold them firmly together. You don't need to worry about it being damaged.
- Heat Insulation Good: Titanium alloy reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.High overall heat insulation performance,High temperature resistance, high wear resistance, high hardness and long service life.
- Prevents Clogs and Leaks: Compared to competitive products, the inner wall of the tube is smoother and burr-free. (reduces the chance of filament clogging). The interface is smoother and more precise.(it can effectively prevent filament leakage).
- Improve Printing Efficiency: 450 -rated Bi-Metal Heatbreak melts filament faster and conducts 60% less heat across the Break Zone than standard heatbreak,which reduce heat loss, greatly improve printing efficiency.
- Prevent Thermal Creep: This structure can reduce the temperature fluctuation of the hotend and make the hotend more stable And reliable so as to reduce the occurrence of thermal creep to improve the printing quality and can effectively prevent the clogging problem caused by thermal creep.
- See more on Amazon...
Brand: Newwish | Manufacturer: Newwish
See On Amazon #18
Haldis 3D CR10 Bi-Metal Heatbreak, Upgrade Smooth BiMetal Titanium + Copper Heatbreak for CR10 Ender 3 V2 PRO Ender 5
Asin: B095HNCBDB | Model: CR10HEAT20 | PartNumber: CR10HEAT20 | Ean: 0728224781955 | UPC: 728224781955
【Plated Copper Heatsink】:Two Components With Different Thermal Conductivity.Improve Heat Dissipation Efficiency.
【Cr10 Heat Break】:This Heatbreak Is Used For The 1.75Mm Cr10 Hotend..
【Package Included】:Comes With 2 Pieces Bi-Metal Cr10 Heatbreak For 1.75Mm Filament.
【Premium Performance】:Ordinary Bimetal Heatbreak Torque Is Less Than 5Kg, The Inner Hole Has A Poor Finish, The Connection Part Is Fixed By Glue, Vwhich Is Very Easy To Fall Off And Affect Printing. Our Product Is Processed By Precision Swiss-Type 5-Axis Machine And Made By Precision Pressing Mechanism. The Inner Hole Finish Is 0.3 And The Torque Is More Than 10Kg..
Features
- BI-METAL HEATBREAK :High quality titanium alloy + plated copper,real bimetal material ,combined with 2 components
- PREMIUM PERFORMANCE :Ordinary bimetal heatbreak torque is less than 5kg, the inner hole has a poor finish, the connection part is fixed by glue, vwhich is very easy to fall off and affect printing. Our product is processed by precision Swiss-type 5-axis machine and made by precision pressing mechanism. The inner hole finish is 0.3 and the torque is more than 10kg.
- PLATED COPPER HEATSINK :two components with different thermal conductivity.improve heat dissipation efficiency
- PACKAGE INCLUDED :Comes with 2 pieces Bi-metal CR10 heatbreak for 1.75mm filament
- CR10 HEAT BREAK :This heatbreak is used for the 1.75mm CR10 Hotend.
- See more on Amazon...
Manufacturer: Haldis 3D
See On Amazon #19
Original Ender 3 V3 KE Hotend with Ceramic Heating Block Kit and Silicone Sock Bi-Metal Heatbreak High Flow&High Temp ONLY Compatible with Creality Ender 3 V3 KE 3D Printer-NOT for Ender 3 V3 SE
Asin: B0CSXY3ZXZ
Bi-Metal Heatbreak:The Tightly Joined Titanium Alloy And Copper With 0.2Mm Thickness Makes For Excellent Thermal Insulation;Ra≤0.4 Roughness Enhances Fluidity Of Filament..
Compatibility:This Hotend Can Only Work For Ender 3 V3 Ke,Not For Ender 3 V3 Se..
High Temp Printing:This Hotend Has Excellent High-Temperature Resistance Up To 300 ℃,Support Various Filaments Such As Hyper-Pla,Petg,Abs,Tpu..
High Flow Printing:Large Melting Area Of Filaments Enabling You To Print At High Flow Rate To Improve The Printing Efficiency..
Features
- Ceramic Heating:The 60W ceramic heating block improves heating efficiency with more uniform heating and faster heat transfer. Heats up to 300 in 40 seconds.
- High Flow Printing:Large melting area of filaments enabling you to print at high flow rate to improve the printing efficiency.
- Bi-Metal Heatbreak:The tightly joined titanium alloy and copper with 0.2mm thickness makes for excellent thermal insulation;Ra 0.4 roughness enhances fluidity of filament.
- High Temp Printing:This hotend has excellent high-temperature resistance up to 300 ,support various filaments such as Hyper-PLA,PETG,ABS,TPU.
- Compatibility:This hotend can only work for Ender 3 V3 KE,NOT for Ender 3 V3 SE.
- See more on Amazon...
Brand: UniTak3D | Manufacturer: UniTak3D
See On Amazon #20
Creality Original Sprite Extruder Upgrade Heater Block Kit with Original Accessories, High Temperature Pro 300 Titanium Heatbreak Plated Copper Nozzle for Ender 3 S1/Ender3 S1 Pro/CR10 Smart Pro
Asin: B0BJQ5TV8G | Model: 9014 | PartNumber: 9014
Bimetal Heatbreak Throat Tube - Using Tc4 Titanium Alloy And Copper Two Kinds Of Metal Processing, Titanium Alloy Has Good Thermal Insulation, Copper To Help Heat Dissipation.For A Long Time Of Printing Has An Obvious Role In Improving The Quality Of Printing..
Compatible With Creality Ender 3 S1, Ender 3 S1 Pro, Ender 3 S1 Plus, Cr10 Smart Pro 3D Printer..
Nickel Plated Copper Heater Block - Copper Has More Than 3X The Thermal Conductivity Of Brass, And The Copper Alloy We Use Has Been Hardened And Treated To Reduce The Oxidation That Occurs In Copper At High Temperatures. The Higher Thermal Conductivity Also Slightly Increase Your Heat-Up Times, And Provide Highter Temperature Control,Reach Up To 500°C, Making It Perfect For The High-Temperature Printing..
Package Include: 1Pcs Assembled Heating Block Kit, 2Pcs Original 0.4Mm Nozzle, 3Pcs 0.4Mm Mk Nozzle, 5Pcs Silicone Sock..
Features
- 100% Original, all products are from Creality.
- Package include: 1pcs assembled heating block kit, 2pcs original 0.4mm nozzle, 3pcs 0.4mm MK nozzle, 5pcs silicone sock.
- Bimetal Heatbreak Throat Tube - Using TC4 titanium alloy and copper two kinds of metal processing, titanium alloy has good thermal insulation, copper to help heat dissipation.For a long time of printing has an obvious role in improving the quality of printing.
- Nickel plated copper Heater block - Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity also slightly increase your heat-up times, and provide highter temperature control,Reach up to 500 C, making it perfect for the high-temperature printing.
- Compatible with Creality Ender 3 S1, Ender 3 S1 PRO, Ender 3 S1 Plus, CR10 Smart Pro 3D Printer.
- See more on Amazon...
Brand: SQWAN | Manufacturer: SQWAN
See On Amazon
Looking For Something Else?
Search