ANYCUBIC 3D Printing Hotend for Anycubic Kobra 2 Series/Kobra 2/Kobra 2 Plus/Kobra 2 Max/Kobra 2 Pro/Kobra 2 Neo 3D Printer
Asin: B0C65VHDN1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Precision Process】Enhances Higher Print Quality And Consistency. Withstand Abrasive Filaments And Maintain Dimensional Accuracy For Precise Prints.
【Excellent After-Sale Service 】Excellent Customer Service For Your Any Needs And Questions. We Will Give You A Satisfactory Answer.
【Easy To Replace】We Would Offer Teaching Video To You. If You Have Any Problems About Installation, We Would Resolve It Timely.
【Faster And Greater】Extruder Replacement Part For Improving Your 3D Printing Performance And Printing Speed.
Features
- Wide Compatibility Compatible with Anycubic Kobra 2 Series Anycubic Kobra 2 Anycubic Kobra 2 Plus Anycubic Kobra 2 Max Anycubic Kobra 2 Pro Anycubic Kobra 2 Neo
- Faster and Greater Extruder replacement part for improving your 3D printing performance and printing speed
- Precision Process Enhances higher print quality and consistency. Withstand abrasive filaments and maintain dimensional accuracy for precise prints
- Easy to Replace We would offer teaching video to you. If you have any problems about installation, we would resolve it timely
- Excellent After-Sale Service Excellent customer service for your any needs and questions. We will give you a satisfactory answer
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 2.00 x 4.00 x 6.00 Inches | Weight: 0.10 pounds
See On Amazon Similar To ANYCUBIC 3D Printing Hotend for
#1
Maxiwatt Hotend Professional for Printer 3D - 24V 50W- Compatible with Ender3, mk10, MK7,MK8,cr-10,creality, Anycubic,E3D, Prusa... Copper
Asin: B07RXW1Q5L
For Multiple Variety Of Filaments: Compatible With Filament Pva, Pla, Abs, Nilon, Flex, Etc. You Will Get Less Blockade In The Neck And Nozzle By Maintaining A More Constant Temperature..
Simple Installation: The Installation In Your 3D Printer Is Very Simple. By Default Is Of Metrics M6 Compatible With The Majority Of The 3D Fdm Domestic And Professional Printers Such As Prusa I3. In A Few Seconds You Can Start Heating The System. However, It´S Recommended, That Like With Any Modification In Your Machine, Perform The Relevant Checks..
Constant And Uniform Temperatures: Our Cylindrical Heater Distributes The Heat Evenly And Precisely. At The Same Time The Ntc 100K Thermistor Included In The Interior Of The Block, Get More Accurate Readings Than In Other Systems Where It Is Installed Further Away..
Excellent Materials: Made Of Stainless Steel Body, With A Circular Shape Of 20.00Mm Diameter And 10.00Mm Height..
Features
- Introducing the new Hotend for 3D FDM printers with a cylindrical shape. The Cylinder Heater by Maxiwatt has been redesigned from scratch to get better results in your 3D printers and even faster printing speeds. Compatible with PVA, PLA, ABS, Nylon, Flex, etc. filaments. It will improve your results. Stainless Steel Heater for 3D printers (Hotend). Cylinder Heater Core
- Excellent Materials: Made of Stainless Steel body, with a circular shape of 20.00mm diameter and 10.00mm height.
- For multiple variety of filaments: Compatible with filament PVA, PLA, ABS, Nilon, Flex, etc. You will get less blockade in the neck and nozzle by maintaining a more constant temperature.
- Constant and uniform temperatures: Our cylindrical heater distributes the heat evenly and precisely. At the same time the NTC 100K thermistor included in the interior of the block, get more accurate readings than in other systems where it is installed further away.
- Simple installation: The installation in your 3D printer is very simple. By default is of metrics M6 compatible with the majority of the 3D FDM domestic and professional printers such as Prusa i3. In a few seconds you can start heating the system. However, it s recommended, that like with any modification in your machine, perform the relevant checks.
- See more on Amazon...
Brand: Maxiwatt | Manufacturer: Maxiwatt
Dimensions: 0.79 x 39.37 x 0.39 inches | Weight: 0.04 Pounds
See On Amazon #2
Capricorn Bowden PTFE Tubing 1M XS Series 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/ CR-10/10S 3D Printer
Asin: B086YPDHMF
Pc4-M6 Couplers: Thread M6/3Mm, Inner Diameter 4Mm, Fit For The Tube Whose Outer Diameter Is 4Mm, Made Of Premium Copper And Plastic, Sturdy And Durable. Pc4-M10 Couplers: Thread M10/6Mm, Inner Diameter 4Mm, Fit For The Tube Whose Outer Diameter Is 4Mm, Made Of High Qulity Stainless Steel And Plastic, High Hardness, Antioxidtion, Anti Corrosion. The Extruder Fittings Are Pc4-M6 And The Hotend Fittings Are Pc4-M10..
Any Questions Please Feel Free To Contact Us At Any Time. We Will Reply To You Within 24 Hours And Provide Technical Support For You..
One Ptfe Cutter With An Extra Sharp Razor Is Also Included To Ensure That The Ptfe Is Cut Flat On Both Sides To Prevent Any Malfunctions Or Heat Creep When Feeding And Retracting..
Capricorn Ptfe Is Well Regarded As The Highest Quality Ptfe Tubing In All Of 3D Printing. The Tight Tolerances Make Sure That The Filament Is Lead Directly To The Hotend With As Little Room For Error As Possible Between The Extruder And The Hotend. Capricorn Ptfe Xs Series Is Rated For Withstanding The Highest Temperatures In The Market Which Is Perfect For Printing Exotic Filaments Such As Abs, Nylon, And Polycarbonate..
Features
- 100% Original Capricorn XS Series tubing.
- Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate.
- PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10.
- One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
- Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #3
Comgrow 25PCS MK8 Ender 3 V2 Nozzles 0.4MM, 3D Printer Brass Hotend Nozzles with DIY Tools Storage Box for Creality Ender 3/Ender 3 Pro/Ender 3 Max/5 Pro/Ender 3 S1/Ender 3 Neo/CR 10 Series 3D Printer
Asin: B0B9LYZSKC
Strong Practicability - Storage Box For Easy Carrying And Storage Of Small Accessories.The Nozzle Cleaning Needle Is Made Of High-Quality Stainless Steel With Good Toughness And Is Not Easy To Break, And The Nozzle Can Be Cleaned From Multiple Angles.The Hexagon Wrench Makes The Adjustment Of The Nozzle Easier..
Wide Compatibility - Suitable For Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo And Cr 10 Series 3D Printers.Compatible With All 1.75Mm Pla Abs Filament 3D Printers..
High Precision - Input Diameter 1.75Mm, Smooth Inner Wall, Extruder Nozzle Diameter Error Less Than 0.02 Mm.Greatly Reduces The Risk Of Print Head Leaks And Avoids Nozzle Clogging..
Package List - The 3D Printer Extruder Nozzles Come With 0.4 Mm Brass Nozzles*25, Nozzle Cleaning Needles*10, Hexagon Wrench*1, Stainless Steel Tweezers*1, And A Storage Box..
Features
- Premium Quality - 25 PCs high-quality brass nozzles, good abrasion resistance, heat resistance, and corrosion resistance.It is convenient for you to replace them in time to achieve high-quality printing.
- Package List - The 3D printer extruder nozzles come with 0.4 mm brass nozzles*25, nozzle cleaning needles*10, hexagon wrench*1, stainless steel tweezers*1, and a storage box.
- Strong Practicability - Storage box for easy carrying and storage of small accessories.The nozzle cleaning needle is made of high-quality stainless steel with good toughness and is not easy to break, and the nozzle can be cleaned from multiple angles.The hexagon wrench makes the adjustment of the nozzle easier.
- High Precision - Input diameter 1.75mm, smooth inner wall, extruder nozzle diameter error less than 0.02 mm.Greatly reduces the risk of print head leaks and avoids nozzle clogging.
- Wide Compatibility - Suitable for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo and CR 10 Series 3D printers.Compatible with all 1.75mm PLA ABS filament 3D printers.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #4
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #5
Creality Capricorn Bowden Tubing 1M, Bowden PTFE Tube for 1.75mm Filament with 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 V3 SE/5/K1 Max 3D Printer
Asin: B09GM6W972
Smoother Filament Output: Designed For 1.75Mm Filament, Creality Capricorn Tubing Has Extremely Accurate Inner & Outer Diameters, And Filament Loads Smoothly Into The Hotend With As Little Room For Error As Possible Between The Extruder And The Hotend..
Great Package: The Package Comes With Two Pc4-M6 Fittings For The Extruder And Two Pc4-M10 Couplers For The Hot End, Its 2Mm Inner Diameter Is Used For The Teflon Tube With An Outer Diameter Of 4Mm. It Includes Everything You Need To Get Started!.
1 Meter Tube With 2Mm Id 4Mm Od: Teflon Tube Length: 1 Meter, Inner Diameter: 1.95Mm ± 0.05Mm, Outer Diameter: 4Mm. The Optimal Inner Diameter Size Is Designed To Reduce "Wiggle Room" Or Flex In The Tube, Allowing You To Print Flexible Filaments Even On The Longest Bowden Systems..
Compatible With More Filaments: This Bowden Tube Is Reinforced With A Proprietary Blend Of High-Performance Additives That Can Withstand Higher Temperatures Than Any Other Tubes, Making It Ideal For Printing Specialty Filaments Such As Abs, Nylon, And Polycarbonate. This Ptfe Tube Xs Tubing Can Keep Working At Temperatures Up To 260°C..
Features
- Genuine Upgrades: Creality Capricorn XS Series Bowden PTFE tubing is the lowest friction premium tubing on the market with faster response, less retraction, and more accurate prints. There is less slippage, wear and tear on the extruder and less clogging when printing chunky filaments such as some wood fillers or iron fillers.
- Compatible with More Filaments: This Bowden tube is reinforced with a proprietary blend of high-performance additives that can withstand higher temperatures than any other tubes, making it ideal for printing specialty filaments such as ABS, nylon, and polycarbonate. This PTFE tube XS tubing can keep working at temperatures up to 260 C.
- Smoother Filament Output: Designed for 1.75mm filament, Creality Capricorn tubing has extremely accurate inner & outer diameters, and filament loads smoothly into the hotend with as little room for error as possible between the extruder and the hotend.
- 1 Meter Tube with 2MM ID 4MM OD: Teflon tube length: 1 Meter, inner diameter: 1.95mm 0.05mm, outer diameter: 4mm. The optimal inner diameter size is designed to reduce wiggle room or flex in the tube, allowing you to print flexible filaments even on the longest Bowden systems.
- Great Package: The package comes with two PC4-M6 fittings for the extruder and two PC4-M10 couplers for the hot end, its 2mm inner diameter is used for the Teflon tube with an outer diameter of 4mm. It includes everything you need to get started!
- See more on Amazon...
Brand: Mefine | Manufacturer: Creality
Weight: 0.11 Pounds
See On Amazon #6
AMX3d PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) 2.0 Meters White Connector Tubing for 3D Printer
Asin: B01CUPV9KC | Model: PRTPTS-BDN20-005 | PartNumber: PRTPTS-BDN20-005 | Ean: 0756519721010 | UPC: 756519721010
High Spec: Withstanding Temperatures Up To 260C, This Bowden Connector Tubing Has A Density Of 2.15-2.20G/Cm3, With A 2Mm Id And 4Mm Od..
Amx3d Accessories: The Best 3D Prints Start With The Best Tools! Amx3d Provides 3D Printing Partsof The Highest Quality. If There Are Any Problems With Your Bowden Tube Just Let Us Know!.
Flexible Tubing: Ptfe Bowden Tubes Offer Impressive Flexibility – Ideal For Smoothly Tracking The Moving 3D Printer Head. Packaged Without Ties To Prevent Crimping..
Low Friction: Made From High Quality, Durable Ptfe, The Teflon Bowden Tube Allows Filament To Slide Better For Smoother Results..
Features
- IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance print quality.
- LOW FRICTION: Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results.
- HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD.
- FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility ideal for smoothly tracking the moving 3D printer head. Packaged without ties to prevent crimping.
- AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems with your Bowden Tube just let us know!
- See more on Amazon...
Brand: AMX3d | Manufacturer: AMX3d
See On Amazon #7
Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder
Asin: B09LQKN5WG | Model: / | PartNumber: /
🎈【Improved Performance】The Optimized Extruder With Metal Extrusion And Original Hotend Kit Pushes The Filament Into The Printer Nozzle, Greatly Making The Metal Extruder Retain Power In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
🎈【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
🎈【Easy To Install】Diy Kit And You Need To Assemble By Yourself. The Full Necessary Screws & Parts Kit For The Extruder Is Included. Referring To Instructions Or Our 5Th Picture To Install, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
🎈【Work Better】Our 3D Printer Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed. The Extruder Drive Has Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve The Printer's Performance. 40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg..
Features
- Quality Assurance 100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
- Work Better Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
- Improved Performance The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Easy To Install DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 4.33 x 3.15 inches
See On Amazon #8
ruthex 7x Soldering Tips/Heat-Set Insert Tips - for Thread Inserts M2 / M2.5 / M3 / M4 / M5 / M6 / M8 - #2-56 / #4-40 / #8-32/ #10-24 1/4" for Soldering Iron - for Plastic Parts and 3D Printer Parts
Asin: B0CDBSGSXY | Model: LOE | PartNumber: LOE | Ean: 4260528721269
Insertion Help Compatible For Soldering Iron Heads 900M And T18 For Example For Soldering Stations Sremtch, Hakko, Lonovo, Rhaegon, Waxrhyed And Other Brands. Dimensions Of The Soldering Iron Adapter Can Be Taken From The Drawing..
Practical Thread Insert Set: M2 / M2.5 / M3 / M4 / M5 / M6 / M8 - #2-56 / #4-40 / #8-32/ #10-24 1/4" 5/16" Threaded Inserts And A 900M/T18 Soldering Iron Adapter. The Ideal Temperature For Insertion Is 10-15 Degrees Above The Hotend Temperature Of The 3D Printing Filament..
No Damage To 3D Printing Part: Due To The Ideal Geometry Of The Soldering Tips, The 3D Printing Parts Will Not Be Damaged. Common Damage Without Ruthex Soldering Tips Is, For Example, Damage To The Surface Around The Thread Insert..
Practical Change System: Due To The Thread In The Soldering Iron Adapter, The Soldering Tips Can Be Changed Very Easily Without Completely Unscrewing The Soldering Iron..
Features
- RUTHEX SOLDERING TIPS FOR RUTHEX THREAD INSERTS: The ruthex soldering tips make it even easier to retrofit thread inserts into 3D printed parts of 3D printers from e.g. Anycubic or Bambu.
- PRACTICAL CHANGE SYSTEM: Due to the thread in the soldering iron adapter, the soldering tips can be changed very easily WITHOUT completely unscrewing the soldering iron.
- INSERTION HELP COMPATIBLE for soldering iron heads 900M and T18 for example for soldering stations SREMTCH, Hakko, LONOVO, RHAEGON, WaxRhyed and other brands. Dimensions of the soldering iron adapter can be taken from the drawing.
- NO DAMAGE TO 3D PRINTING PART: Due to the ideal geometry of the soldering tips, the 3D printing parts will not be damaged. Common damage without ruthex soldering tips is, for example, damage to the surface around the thread insert.
- PRACTICAL THREAD INSERT SET: M2 / M2.5 / M3 / M4 / M5 / M6 / M8 - #2-56 / #4-40 / #8-32/ #10-24 1/4 5/16 threaded inserts and a 900M/T18 soldering iron adapter. The ideal temperature for insertion is 10-15 degrees above the hotend temperature of the 3D printing filament.
- See more on Amazon...
Brand: ruthex | Manufacturer: ruthex
Dimensions: 11.97 x 6.54 x 7.32 inches
See On Amazon #9
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #10
SIQUK 5 Pieces Teflon Tube PTFE Tubing (1M) with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Fitting Connector for 3D Printer 1.75mm Filament
Asin: B07PV8754Z | Model: SC-18-034 | PartNumber: SC-18-034 | Ean: 0682604606026 | UPC: 682604606026
Pc4-M10 Fittings - Thread M10/6Mm, Inner Diameter(Black End) 4Mm, Fit For The Tube Whose Outer Diameter Is 4Mm.
Attention - Small 3D Printer Accessories, Please Keep Away From Children.
Compatibility: Compatible With All 1.75Mm Pla Abs 3D Printer.
Pc4-M6 Fittings - Thread M6/3Mm, Inner Diameter(Blue End) 4Mm, Fit For The Tube Whose Outer Diameter Is 4Mm.
Features
- Teflon Tube - outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260
- PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm
- PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
- Compatibility: compatible with all 1.75mm PLA ABS 3D printer
- Attention - small 3D printer accessories, please keep away from children
- See more on Amazon...
Brand: SIQUK | Manufacturer: SIQUK
Dimensions: 1.97 x 7.87 x 5.91 inches
See On Amazon #11
ELEGOO 3D Printer Extruder for Neptune 3 Pro/3 Plus/3 Max 3D Printer, Fully Assemble Dual-Gear Direct Drive Extruder, ELEGOO Official 3D Printer Accessories
Asin: B0C8NSBKY7 | Model: CA-EL-3D-NA02 | PartNumber: CA-EL-3D-NA02
Premium Customer Service, Contact Us If You Have Any Questions.
Elegoo Official 3D Printer Accessories.
Features
- Fully assembled extruder for Neptune 3 Pro/3 Plus/3 Max ONLY
- ELEGOO Official 3D Printer Accessories
- Premium customer service, contact us if you have any questions
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 0.39 x 0.39 x 0.39 Inches
See On Amazon #12
Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/Ender 3 V2
Asin: B08J7N2LNL | Model: US4-ENDER3JINDUANJICHU-FBA | PartNumber: US4-ENDER3JINDUANJICHU-FBA
Direct Extruding Smooth Feed-In - Lower Torque Requirements On The Stepper Motor, Reducing The Possibility Of The Nozzle Blockage When Retracting Filament And Malfunction When Loading New Filament. There Is More Even Feed-In With Direct Extruding Than Bowden Tube Extruding..
Printing At High - Temperature, Strong Compatibility: Compatible With More Types Of Filament Like Pla Filament, Petg Filament And Tpu Filemnt. When Printing Flexible Tpu Under High Temperature, It Can Optimize Tpu Printing Performance..
Integrated All Metal Hotend - It's Sturdy And Wear-Resistant With An All-Metal Shell And Surface Oxidation Treatment; An Integrated Structure Is Convenient For Wiring And Replacing..
Easy To Install And Use - Switch Bowden Extrusion To Direct Extruder At Any Time And Easy To Disassembly. It Doesn't Affect The Inherent Function Of The Printer Because It's A Complete Extrusion Kit. With Longer Extruder Motor Connecting Cable, Tools, Accessories, And Wiring Diagram Instruction For Installation, Easy To Assemble..
Features
- Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.
- Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
- Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.
- Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
- Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.
- See more on Amazon...
Brand: Wolias | Manufacturer: Creality 3D
Weight: 0.80 pounds
See On Amazon #13
PTFE Teflon tubing 5ft- 2mm ID X 4mm OD for 1.75 Filament Bowden 3D Printer -Allen Tech PTFE Teflon Tube
Asin: B073RDFTDV | Model: 3DPTFE2/4CM5FT | PartNumber: 3DPTFE2/4CM5FT | Ean: 0704256851569 | UPC: 704256851569
Excellent Resistant To Acids, Alkali And All Kinds Of Organic Solvents: Astm D543. High Lubricating Ability And Non-Stick.
Excellent Electric Property And Long Life. Widely Used In Electronics, Chemicals, Medical And Industrial.
Raw Materials Meet Fda Requirements Per Fda 21 Cfr 177.1550 For Use With Food Contact Surfaces.
Temperature Range (Degree F):-454 To 500. Flame Rating: Ul-224 Vw-1(Ul-Recognized). Density: 2.15-2.20 G/Cm3..
Features
- ID:2mm(0.079'')/OD:4mm(0.158''),Length:5ft.Material: PTFE(common name:Teflon).For 1.75 filament Bowden 3D Printer,Translucent
- Temperature range (Degree F):-454 to 500. Flame rating: UL-224 VW-1(UL-recognized). Density: 2.15-2.20 g/cm3.
- Excellent resistant to acids, alkali and all kinds of organic solvents: ASTM D543. High lubricating ability and non-stick
- Raw materials meet FDA requirements per FDA 21 CFR 177.1550 for use with food contact surfaces
- Excellent electric property and long life. Widely used in electronics, chemicals, medical and industrial
- See more on Amazon...
Brand: ALLEN TECH | Manufacturer: Allen Tech
Dimensions: 0.39 x 3.94 x 3.94 inches
See On Amazon #14
ELEGOO Neptune 4 Pro 3D Printer, 500mm/s High Speed FDM Printer with Klipper Firmware, Auto Leveling and Direct Drive Extruder, Easy Assembly, 8.85x8.85x10.43 Inch Printing Size
Asin: B0C749177C | Model: US-EL-3D-N4P | PartNumber: US-EL-3D-N4P
【Segmented Heated Zones】Neptune 4 Pro Has 2 Independent Heating Areas. The Slicing Software Automatically Activates The Peripheral Heating Zone If The Model Exceeds The Central Heating Zone, Reducing Power Consumption And Speeding Up Heating.
【Auto Leveling & High-Temp Nozzle】121-Points Auto Leveling For Quick And Accurate Leveling. With A 300°C High-Temp Nozzle And Extended Hot End, Filament Melts And Extrudes Faster. It's Compatible With Pla, Petg, Abs, Tpu, And Nylon, Making It Versatile For Different Materials.
【Powerful Direct Drive Extruder】Self-Developed Dual-Gear Direct Drive Extruder Boasts A 5.2:1 Reduction Ratio, Providing Powerful Extrusion And Smoother Filament Feeding. Combined With Metal Throat Pipe And Innovative Air Duct Design, It Minimizes The Risk Of Nozzle Clogging.
【Greatly Enhanced Printing Precision】X And Y Axes Upgraded To All-Metal Guide Rails With U-Shaped Steel Wheels For More Precise Movement, Reduced Vibration, Improved Print Quality, And Extended Lifespan. 8.85X8.85X10.43 Inch/225X225x265mm Build Volume.
Features
- 500mm/s Lightning-Fast Speed With Klipper firmware onboard, ELEGOO Neptune 4 pro achieves an astonishing maximum printing speed of 500mm/s with 20000mm/s acceleration. Save you time on your printing tasks! Recommended printing speed is 250mm/s
- Greatly Enhanced Printing Precision X and Y axes upgraded to all-metal guide rails with U-shaped steel wheels for more precise movement, reduced vibration, improved print quality, and extended lifespan. 8.85x8.85x10.43 inch/225x225x265mm build volume
- Segmented Heated Zones Neptune 4 Pro has 2 independent heating areas. The slicing software automatically activates the peripheral heating zone if the model exceeds the central heating zone, reducing power consumption and speeding up heating
- Powerful Direct Drive Extruder Self-developed dual-gear direct drive extruder boasts a 5.2:1 reduction ratio, providing powerful extrusion and smoother filament feeding. Combined with metal throat pipe and innovative air duct design, it minimizes the risk of nozzle clogging
- Auto Leveling & High-Temp Nozzle 121-points auto leveling for quick and accurate leveling. With a 300 C high-temp nozzle and extended hot end, filament melts and extrudes faster. It's compatible with PLA, PETG, ABS, TPU, and nylon, making it versatile for different materials
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 20.30 x 17.50 x 18.70 inches | Weight: 19.60 pounds
Warranty: 12 months guarantee for main parts of the printer(nozzles and build plate sheet excluded)
See On Amazon #15
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 Pounds
See On Amazon #16
0.4MM MK8 Ender 3 Nozzles 25 pcs 3D Printer Brass Nozzles Extruder for Makerbot Creality CR-10 with 5 Needles and Metal Storage Box (0.4mm)
Asin: B082PZG1RZ | Model: LM-G1RZ | PartNumber: LM-G1RZ | Ean: 0734830917633 | UPC: 734830917633
Precision Process: Made With Centering Cnc Precision Automatic Lathe And One-Time Forming Technology, Make Sure The Input And Output Holes Are Concentric And The Interior Of Nozzle Is Smooth Without Burrs. Due To All Of Above, Not Only Reduce The Resistance, Avoid Filament Getting Stuck On Nozzle, But Also Effectively Guarantee The Service Life Of The Nozzle, Make Out Of Filament More Smoother..
Each Of Our Kit Only Comes In A Single Size, So You Can Feel Free Mix And Match!.
Precise Design: Cutting With The Diamond Knife, Make The Contact Surface More Flat, So It Reduces The Risk Of Printhead Leakage Greatly And Avoid Nozzles Clogging..
Applicability And Compatibility: Our Nozzles Fit For 3D Printer Makerbot Creality Cr-10, Mk8 Makerbot Reprap Prusa I3, Compatible With All 1.75Mm Pla Abs 3D Printer. Fit Exactly Like The Original..
Features
- Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm; a set of 25pcs printer nozzles and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.
- Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
- Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs. Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother.
- Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging.
- Each of our kit only comes in a single size, so you can feel free mix and match!
- See more on Amazon...
Brand: Meafeng | Manufacturer: Meafeng
Dimensions: 3.94 x 3.94 x 3.94 Inches
See On Amazon #17
3D Printer Hotend Silicone Sock, 6 PCS Heater Block Silicone Cover for Creality Ender 3/3 Pro/3 V2, Ender 5/5 Plus/ 5 Pro, CR 10 Series, MK7/ 8/9 3D Printer Hotend
Asin: B09VKZJKQ2 | Model: KITANIS-3d-Printer Hotend | PartNumber: KITANIS-3d-Printer Hotend | Ean: 0785691706164 | UPC: 785691706164
Upgraded Material:3D Printer Hotend Silicone Sock Is Made Of Heat-Resistant, Non-Stick Silicone Material, High-Temperature Resistance: 280℃. Good For Keeping The Hot End Clean And Temperature Stable..
Customer Protection：Our 3D Printer Accessories Use High-Quality Silicone Materials And Fine Workmanship, If You Have Any Questions About Our Product, Please Feel Free To Contact Us, We Will Do Our Best For You..
Package Included:6 Pcs Silicone Cover For Mk7, Mk8, Mk9 Hotend Heater Block，It Has Good Flexibility And Can Be Placed Close To The Heating Block, And Easy To Install, Stable And Not Easy To Fall Off, Very Strong..
Function:The Silicone Cover Will Keep Your Heater Block Clean And Repel Plastic Of Burnt, Blackened, And Build-Up, So That Can Extend The Life Of The Heater Block And Extruder; And Helps To Keep The Hotend Temperature Stable..
Features
- Compatibility The Heater Block Silicone Sock fit for Creality Ender 3/3 Pro/3 V2, Ender 5/5 Pro/5 Plus, CR-10/CR-10S/CR-10 S4/CR-10 S5/CR-10 mini, Ender-2, Anet A8, etc. MK7, MK8, MK9 hotend.
- Function:The Silicone Cover will keep your heater block clean and repel plastic of burnt, blackened, and build-up, so that can extend the life of the heater block and extruder; and helps to keep the hotend temperature stable.
- Upgraded Material:3D Printer Hotend Silicone Sock is made of heat-resistant, non-stick silicone material, high-temperature resistance: 280 . Good for keeping the hot end clean and temperature stable.
- Package included:6 Pcs Silicone Cover for MK7, MK8, MK9 hotend heater block it has good flexibility and can be placed close to the heating block, and easy to install, stable and not easy to fall off, very strong.
- Customer Protection Our 3D Printer Accessories use high-quality silicone materials and fine workmanship, If you have any questions about our product, please feel free to contact us, we will do our best for you.
- See more on Amazon...
Brand: KITANIS | Manufacturer: KITANIS
See On Amazon #18
4PCS Official Creality 3D Printer Hotend Silicone Sock Heater Block Silicone Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5 Pro/CR-10 10S S4 S5
Asin: B07N18BZQM | Model: CA-GJT | PartNumber: CA-GJT
This Is A Great Replacement For The Easily Worn And Torn Kapton Tape And Heat Resistant Cotton That Come With Any 3D Printers. This Silicone Sock Is Much More Durable And Functional When Compared To Typical Stock Soloutions For Hotend Insulation..
Any Accessories In Our Store Have Been Extensively Tested On All Comgrow Brand Products..
With This Sock You Can Safely Print More Exotic Materials Such As Petg At Higher Temperatures While Also Using The Cooling Fans At Full Speed. Actively Keeping The Hotend Very Hot And Cooling The Petg Much Quicker Before It Is Laid Onto The Hotbed Can Help With Success Rates On More Prints..
Hotend Socks Can Be Used To Quickly Heat The Hotend To A Desired Temperature As The Structure Of The Silicone Inside The Sock Prevents Heat From Escaping Quickly..
Features
- This Comgrow hotend sock will greatly help to stabalize the temperature of the hotend regardless of the surrounding environment temperatures.
- Hotend Socks can be used to quickly heat the hotend to a desired temperature as the structure of the silicone inside the sock prevents heat from escaping quickly.
- This is a great replacement for the easily worn and torn kapton tape and heat resistant cotton that come with any 3D printers. This silicone sock is much more durable and functional when compared to typical stock soloutions for hotend insulation.
- With this sock you can safely print more exotic materials such as PETG at higher temperatures while also using the cooling fans at full speed. Actively keeping the hotend very hot and cooling the PETG much quicker before it is laid onto the hotbed can help with success rates on more prints.
- Any accessories in our store have been extensively tested on all Comgrow brand products.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.50 x 0.90 x 0.90 Inches | Weight: 0.04 pounds
See On Amazon #19
Official Creality 3D Printer Ender 3 0.4mm 5PCS Brass Hotend Nozzles for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series and CR 10 Series
Asin: B09W2J7P5X | Model: CR-NOZZLES-0.4MM | PartNumber: CR-NOZZLES-0.4MM
【Applicability And Compatibility】Mk8 Extruder Nozzles Fit For 3D Printers Like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/Cr 10 Series, Compatible With All 1.75Mm Pla Abs 3D Printers. Fit Exactly Like The Original..
【After Sales Service】We Pay Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【Package Include】Printer Nozzles Come With 5 Pieces Of Mk8 Nozzles In 0.4Mm.
【Precise Design】3D Printer Nozzles Can Prevent The Print Head Leakage Effectively And Produce Consistent Prints With Smooth And Glossy Polish. Reduce The Resistance From The Corners And Avoid Blocking The Filament With A Rounded Chamfer. Easy To Identify With Engraving The Size On Each Nozzle..
Features
- Quality Assurance MK8 nozzles are made of high-quality brass material. Heavy duty and provide a long service life. Easy to install and change.
- Precise Design 3d printer nozzles can prevent the print head leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking the filament with a rounded chamfer. Easy to identify with engraving the size on each nozzle.
- Applicability and Compatibility MK8 extruder nozzles fit for 3D Printers like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series, compatible with all 1.75mm PLA ABS 3D printers. Fit exactly like the original.
- Package Include Printer nozzles come with 5 pieces of MK8 nozzles in 0.4mm
- After Sales Service We pay great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality
See On Amazon #20
25 PCS 3D Printer Brass Nozzles 0.4mm, Fosvrde MK8 Ender 3 Nozzles Extruders for with DIY Tools and Metal Storage Box for Ender 3/Ender 3 Pro/Ender 3 V2 CR-10
Asin: B0CR8KDRSM
【Product Feature】-The Brass Nozzle Shape Is Smooth And Bright With Lettering, Let You Better Distinguish The Details See The Quality. The Inner Wall Is Smooth And Smooth, The Cutting Chamfer Joint Is Closely Fitted, Avoid Filament Getting Stuck On Nozzle, So It Reduces The Risk Of Printhead Leakage Greatly And Avoid Nozzles Clogging..
【Wide Compatibility】-The For 3D Printer Mk8 Suitable For 3D Printer Mk8 Cr-10, Are Compatible With For Ender 3/Ender 3 Pro/Ender 3S/Ender 3 V2 Cr-10 And Compatible With Most 1.75Mm 3D Printers.
【Product Parameter】- Input Diameter 0.2Mm, Output Diameter 1.75Mm, Out Thread M6, Diameter 0.4 Mm, The Outer Surface Is Marked With A Size, So You Can Easily Identify The Specifications Of The Nozzle..
【Value For Money】】- Mk8 Nozzles Kit Come With 25 Nozzle Pieces, But It Also Includes 5 Nozzle Cleaners And 1 Hexagon Wrench,1 Stainless Steel Tweezers. These Accessories Make It Easier For You To Maintain And Clean Your Printer For Optimal Performance..
Features
- Premium quality materials - The Fosvrde 25PCS MK8 nozzles made of high-quality brass material, faster heat conduction and corrosion resistance, achieve high-quality printing.
- Value for money - MK8 nozzles kit come with 25 nozzle pieces, but it also includes 5 nozzle cleaners and 1 hexagon wrench,1 stainless steel tweezers. these accessories make it easier for you to maintain and clean your printer for optimal performance.
- Product feature -The brass nozzle shape is smooth and bright with lettering, Let you better distinguish the details see the quality. the inner wall is smooth and smooth, the cutting chamfer joint is closely fitted, avoid filament getting stuck on nozzle, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging.
- Product parameter - Input diameter 0.2mm, output diameter 1.75mm, out thread M6, diameter 0.4 mm, the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.
- Wide compatibility -The for 3D Printer MK8 Suitable for 3D printer MK8 CR-10, are compatible with for Ender 3/Ender 3 Pro/Ender 3s/Ender 3 V2 CR-10 and Compatible with most 1.75mm 3D printers
- See more on Amazon...
Brand: Fosvrde | Manufacturer: Fosvrde
Dimensions: 0.70 x 7.00 x 1.50 Inches | Weight: 0.30 pounds
See On Amazon
Looking For Something Else?
Search