Seeed Studio XIAO ESP32 S3 Sense(Supports Arduino) - 2.4GHz Wi-Fi, BLE 5.0, OV2640 Camera Sensor, Digital Microphone, 8MB PSRAM, 8MB Flash, Battery Charge Supported, Rich Interface, IoT, Embedded ML
Asin: B0C69FFVHH
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Great Memory For More Possibilities: Offer 8Mb Psram And 8Mb Flash, Supporting Sd Card Slot For External 32Gb Fat Memory.
Thumb-Sized Compact Design: 21 X 17.5Mm, Adopting The Classic Form Factor Of Xiao, Suitable For Space-Limited Projects Like Wearable Devices.
Outstanding Rf Performance: Support 2.4Ghz Wi-Fi And Ble Dual Wireless Communication, Support 100M+ Remote Communication When Connected With U.Fl Antenna.
Advanced Functionality: Detachable Ov2640 Camera Sensor For 1600*1200 Resolution, Compatible With Ov5640 Camera Sensor, Integrating Additional Digital Microphone.
Features
- Powerful MCU Board: Incorporate the ESP32S3 32-bit, dual-core, Xtensa processor chip operating up to 240 MHz, mounted multiple development ports, Arduino / MicroPython supported
- Advanced Functionality: Detachable OV2640 camera sensor for 1600*1200 resolution, compatible with OV5640 camera sensor, integrating additional digital microphone
- Great Memory for more Possibilities: Offer 8MB PSRAM and 8MB FLASH, supporting SD card slot for external 32GB FAT memory
- Outstanding RF performance: Support 2.4GHz Wi-Fi and BLE dual wireless communication, support 100m+ remote communication when connected with U.FL antenna
- Thumb-sized Compact Design: 21 x 17.5mm, adopting the classic form factor of XIAO, suitable for space-limited projects like wearable devices
- See more on Amazon...
Brand: seeed studio | Manufacturer: seeed studio
See On Amazon Similar To Seeed Studio XIAO ESP32 S3
#1
HiLetgo ESP-WROOM-32 ESP32 ESP-32D Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE
Asin: B0718T232Z | Model: 3-01-1287 | PartNumber: 3-01-1287
Support Lwip Protocol, Freertos.
Esp32 Is A Safe, Reliable, And Scalable To A Variety Of Applications.
Supportthree Modes: Ap, Sta, And Ap+Sta.
Ultra-Low Power Consumption, Works Perfectly With The Arduino Ide.
Features
- 2.4GHz Dual Mode WiFi + Bluetooth Development Board
- Ultra-Low power consumption, works perfectly with the Arduino IDE
- Support LWIP protocol, Freertos
- SupportThree Modes: AP, STA, and AP+STA
- ESP32 is a safe, reliable, and scalable to a variety of applications
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
HiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module Works Great for Arduino IDE/Micropython (Large)
Asin: B081CSJV2V
Data Download Access To The Website: Http://Www;Nodemcu;Com.
Arduino Compatible, Works Great With The Latest Arduino Ide/Mongoose Iot/Micropython.
Features
- Built-in Micro-USB, with flash and reset switches, easy to program
- Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython
- Data download access to the website: http://www;nodemcu;com
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
Arduino Nano ESP32 with headers [ABX00083] ESP32-S3, USB-C, Wi-Fi, Bluetooth, HID Support, MicroPython Compatible
Asin: B0C947BHK5 | Model: ABX00083 | PartNumber: ABX00083 | Ean: 7630049203969
Arduino And Micropython Support: The Nano Esp32 Provides Full Support For Both Arduino And Micropython Programming Languages, Allowing You To Effortlessly Switch Between The Two. Leverage Your Existing Arduino Knowledge Or Venture Into The Exciting Realm Of Micropython With Ease. Beginners Can Also Benefit From The Introductory Course Offered, Ensuring A Solid Foundation For Their Micropython Journey..
Hid Support: Take Your Projects To The Next Level With Hid (Human Interface Device) Support Offered By The Nano Esp32. This Feature Allows You To Emulate Various Human Interface Devices, Such As Keyboards Or Mice, Over Usb. By Emulating These Devices, You Can Create Unique And Interactive Experiences, Enabling Seamless Interaction Between Your Projects And Computers..
Arduino Iot Cloud Compatible: The Nano Esp32 Integrates With The Arduino Iot Cloud, Enabling You To Effortlessly Create Iot Projects. With Just A Few Lines Of Code, You Can Connect Your Devices, Collect Data, And Remotely Monitor And Control Them Using The Arduino Iot Cloud App. The Nano Esp32 Takes Care Of The Necessary Security Measures, Ensuring Your Data Remains Protected While You Focus On Developing Innovative Iot Solutions..
Wi-Fi And Bluetooth Connectivity: With The Nano Esp32, You Can Tap Into The Impressive Capabilities Of The Esp32-S3 Microcontroller, A Widely Recognized And Acclaimed Choice In The Iot Realm. Enjoy Reliable And High-Speed Wireless Connectivity, Enabling Your Projects To Effortlessly Connect To Networks, Communicate With Other Devices, And Access The Vast Resources Available On The Internet..
Features
- Dive into IoT with ease: With the Nano ESP32, there are no more excuses to embrace your exploration of IoT and MicroPython. It delivers a compelling combination of compactness, wireless connectivity, programming versatility, cloud compatibility, and HID support, providing everything you need to unleash your creativity, realize your project ideas, and embark on a journey of endless possibilities.
- Wi-Fi and Bluetooth connectivity: With the Nano ESP32, you can tap into the impressive capabilities of the ESP32-S3 microcontroller, a widely recognized and acclaimed choice in the IoT realm. Enjoy reliable and high-speed wireless connectivity, enabling your projects to effortlessly connect to networks, communicate with other devices, and access the vast resources available on the internet.
- Arduino and MicroPython support: The Nano ESP32 provides full support for both Arduino and MicroPython programming languages, allowing you to effortlessly switch between the two. Leverage your existing Arduino knowledge or venture into the exciting realm of MicroPython with ease. Beginners can also benefit from the introductory course offered, ensuring a solid foundation for their MicroPython journey.
- Arduino IoT Cloud compatible: The Nano ESP32 integrates with the Arduino IoT Cloud, enabling you to effortlessly create IoT projects. With just a few lines of code, you can connect your devices, collect data, and remotely monitor and control them using the Arduino IoT Cloud app. The Nano ESP32 takes care of the necessary security measures, ensuring your data remains protected while you focus on developing innovative IoT solutions.
- HID support: Take your projects to the next level with HID (Human Interface Device) support offered by the Nano ESP32. This feature allows you to emulate various human interface devices, such as keyboards or mice, over USB. By emulating these devices, you can create unique and interactive experiences, enabling seamless interaction between your projects and computers.
- See more on Amazon...
Brand: Arduino | Manufacturer: Arduino
Dimensions: 12.60 x 2.76 x 1.18 inches
Warranty: as described in the official website
See On Amazon #4
Freenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM, Terminal Block Shield with Pin Header, 5V 3.3V Power Outputs, GPIO Status LED
Asin: B0CD2512JV | Model: FNK0091 | PartNumber: FNK0091
Independent Led -> The Status Led Is Driven By The Chip Instead Of The Gpio So The Gpio Will Not Be Affected..
Terminal Block And Header -> Connect To All Gpio Headers Of Raspberry Pi Pico, 2.54Mm / 0.1In Pitch..
Power Circuit -> Provide Multiple 5V And 3.3V Power Outputs. (5V Output Up To 3A With External Power Supply.).
Gpio Status Led -> Led On If Gpio Outputs/Inputs High Level, Led Off If Gpio Outputs/Inputs Low Level..
Features
- Compatible models -> Freenove ESP32 / ESP32-S3 series. (Note: Boards from other brands are not compatible due to different pinout.)
- GPIO status LED -> LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs low level.
- Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected.
- Power circuit -> Provide multiple 5V and 3.3V power outputs. (5V output up to 3A with external power supply.)
- Terminal block and header -> Connect to all GPIO headers of Raspberry Pi Pico, 2.54mm / 0.1in pitch.
- See more on Amazon...
Brand: FREENOVE | Manufacturer: Freenove
Warranty: 1 year
See On Amazon #5
ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA Compatible with Arduino IDE (1 PCS)
Asin: B07WCG1PLV | Model: 15363 | PartNumber: 15363 | Ean: 0701715430556 | UPC: 701715430556
Supportthree Modes: Ap, Sta, And Ap+Sta.
1Pcs 30Pin Esp32 Development Board 2.4Ghz Wifi Dual Cores Microcontroller Integrated With Antenna Rf Low Noise Amplifiers Filters.
Ultra-Low Power Consumption, Compatible With Arduino Ide.
Support Lwip Protocol, Freertos;Esp32 Is A Safe, Reliable, And Scalable To A Variety Of Applications.
Features
- 2.4GHz Dual Mode WiFi + Bluetooth Development Board
- Support LWIP protocol, Freertos;ESP32 is a safe, reliable, and scalable to a variety of applications
- SupportThree Modes: AP, STA, and AP+STA
- Ultra-Low power consumption, Compatible with Arduino IDE
- 1PCS 30Pin ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters
- See more on Amazon...
Brand: AITRIP | Manufacturer: AiTrip
See On Amazon #6
2PCS ESP32-CAM-MB, Aideepen ESP32-CAM W BT Board ESP32-CAM-MB Micro USB to Serial Port CH-340G with OV2640 2MP Camera Module Dual Mode
Asin: B0948ZFTQZ | Model: 2_XF01022_US | PartNumber: 2_XF01022_US
Hk-Esp32-Cam-Mb Module Can Work Independently As The Smallest System.
Ultra-Low Power Consumption, Deep Sleep Current Is As Low As 6Ma. It Is An Ultra-Small 802.11B/G/N W+ Bt/Ble Soc Module -->>Our Technical Service Team Is Always Ready To Answer Your Questions. Please Feel Free To Contact Us--）.
A New W-Bt Dual-Mode Development Board Based On Esp32 Design, Using Pcb On-Board Antenna, With 2 High-Performance 32-Bit Lx6cpu, Using 7-Level Pipeline Architecture, Main Frequency Adjustment Range 80Mhz To 240Mhz.
Hk-Esp32-Cam-Mb Adopts Micro Usb Interface, Convenient And Reliable Connection Method, Convenient To Apply To Various Iot Hardware Terminal Occasions.
Features
- Package included:2pcs ESP32-CAM-MB Camera Module and 2pcs USB-TTL Serial Adapter Module
- HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions
- HK-ESP32-CAM-MB module can work independently as the smallest system
- A new W-BT dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz
- Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n W+ BT/BLE SoC module -->>Our technical service team is always ready to answer your questions. please feel free to contact us--
- See more on Amazon...
Brand: Aideepen | Manufacturer: Aideepen
See On Amazon #7
KeeYees ESP32S ESP32 Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1 Microcontroller ESP-WROOM-32 Chip for Arduino (38PIN Narrow Version, 2PCS)
Asin: B07QCP2451 | Ean: 0713871269840 | UPC: 713871269840
Support Lua Program, Easy To Develop. Support Of Three Modes: Ap, Sta And Ap + Sta..
Technical Support: Our Pdf Tutorial Is Available On This Page. Please Pull Down This Page To Find The Tutorial: User Guide (Pdf).
This Board Is Used With 2.4 Ghz Dual-Mode Wi-Fi And Bluetooth Chips Esp-Wroom-32, As Well As The 40Nm Low-Power Technology..
The Module Has 38 Pins And Has More Features Than A 30-Pin Module. Narrower Width, Compatible With Breadboard.
Features
- This module is safe, reliable, and scalable to a variety of applications.
- The module has 38 pins and has more features than a 30-pin module. Narrower width, compatible with breadboard
- Support Lua program, easy to develop. Support of three modes: AP, STA and AP + STA.
- This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips ESP-WROOM-32, as well as the 40nm low-power technology.
- Technical Support: Our PDF tutorial is available on this page. Please pull down this page to find the tutorial: User Guide (PDF)
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
Dimensions: 0.47 x 1.90 x 1.00 inches
See On Amazon #8
ideaspark ESP32 Development Board Integrated 0.96 Inch OLED Display,CH340 Driver,WiFi+BLE Wireless Module,and Micro USB Works Great for Arduino/Micropython(Pin Header Soldered)
Asin: B0CN4F354N | Ean: 0727210185197 | UPC: 727210185197
This Board Uses I2c To Connect To An Oled Display Via The Sda (D21 / Gpio21) And Scl (D22 / Gpio22) Pins. With This Board,It's Easy To Display A Variety Of Information And Data.
This Board Is An Outstanding Option For Various Internet Of Things (Iot) Projects. It Can Be Used To Display Network Connection Status,Monitor Information, Power Levels, And Other Relevant Data. Additionally, It's Suitable For Building Internet Weather Stations, News Stations, Clocks, And Other Similar Applications.
To Install The New Version Driver For Ch340,Simply Search For The Keywords "Ch340 Driver" On Google.Com Or Bing.Com And Follow The Installation Instructions Provided.Recommended For Win10 Operating System.
The Board Is Based On Esp32-Wroom-32 Module Integrated With Antenna Switches, Rf Balun, Power Amplifiers, Low-Noise Amplifiers, Filters, And Management Modules, And The Entire Solution Occupies The Least Area Of Pcb. 2.4 Ghz Wi-Fi Plus Ble Dual-Mode Chip, With Tsmc Ultra-Low Power Consumption 40Nm Technology, Power Dissipation Performance And Rf Performance Is The Best, Safe And Reliable, Easy To Extend To A Variety Of Applications.
Features
- The ESP32 0.96'' OLED board has all the features of the traditional ESP32 Devkit V1 module,with the same exact peripheral ports,offers seamless integration with a 0.96-inch OLED display, eliminating the need for frustrating wires and breadboards.Display features a high-resolution 128x64 with SSD1306 driver and is compatible with I2C interfaces. Plus,It uses Micro usb cable to connect. Say goodbye to messy setups and hello to hassle-free electronics with the ESP32 board
- The Board is based on ESP32-WROOM-32 module integrated with Antenna switches, RF Balun, power amplifiers, low-noise amplifiers, filters, and management modules, and the entire solution occupies the least area of PCB. 2.4 GHz Wi-Fi plus BLE dual-mode chip, with TSMC Ultra-low power consumption 40nm technology, power dissipation performance and RF performance is the best, safe and reliable, easy to extend to a variety of applications
- This board uses I2C to connect to an OLED display via the SDA (D21 / GPIO21) and SCL (D22 / GPIO22) pins. With this board,it's easy to display a variety of information and data
- To install the new version driver for CH340,simply search for the keywords CH340 Driver on Google.com or Bing.com and follow the installation instructions provided.Recommended for Win10 Operating System
- This board is an outstanding option for various Internet of Things (IoT) projects. It can be used to display network connection status,monitor information, power levels, and other relevant data. Additionally, it's suitable for building Internet Weather Stations, News Stations, Clocks, and Other similar applications
- See more on Amazon...
Brand: ideaspark | Manufacturer: ideaspark
Dimensions: 0.63 x 2.83 x 2.05 inches
Warranty: No
See On Amazon #9
Seeed Studio XIAO SAMD21 (Pre-Soldered) The Smallest Arduino Microcontroller Based on SAMD21 with Rich Interfaces, 100% Arduino IDE Compatible, desiged for Projects Need Arduino Micro, 1pc.
Asin: B0B15B869W
🌱【Fully Compatible With Arduino Ide】 Seeed Studio Xiao Development Board Is Perfectly Compatible With Arduino Ide And You Can Easily Create Small Projects Using The Extensive And Comprehensive Arduino Library. It Has A 2.54Mm Pin Pitch And Can Be Used Even When Inserted Into A Breadboard Because It Is An Arduino Microcontroller.It Has A 2.54Mm Pin Pitch And Can Be Used Even When Inserted Into A Breadboard Because It Is An Arduino Microcontroller..
🌱【Perfect For Wearable And Tiny Arduino Projects】 This Microcontroller Has Good Performance In Processing But Needs Less Power. As A Matter Of Fact, It Is Designed In A Tiny Size And Can Be Used For Arduino Wearable Devices And Small Projects..
🌱【Applications】 Seeed Studio Xiao Is Suitable For Wearable Devices, Rapid Prototyping, Diy Keyboard, Usb To Multi-Channel Ttl/Usb Host Mode, Etc..
🌱【Rich Interfaces In A Tiny Size】 The Device Has 14 Gpio Pins, Each Of Which Has 11 Analog Channels, 11 Digital Channels, I2c*1, Uart*1, And Spi*1, Usb Type-C Interface*1 In A Tiny Space, Just 20Mm*17.5Mm (About The Size Of Your Thumb). Seeeduino Xiao Is The Smallest Arduino Compatible Board In The Seeeduino Series..
Features
- Powerful CPU The XIAO is equipped with an ARM Cortex-M0+ 32bit 48MHz microcontroller, which is three times faster than Arduino Uno and Arduino Nano. Furthermore, this Arduino IDE compatible board Xiao has 256KB flash memory and 32KB SRAM.
- Rich Interfaces in a Tiny Size The device has 14 GPIO pins, each of which has 11 analog channels, 11 digital channels, I2C*1, UART*1, and SPI*1, USB Type-C interface*1 in a tiny space, just 20mm*17.5mm (about the size of your thumb). Seeeduino XIAO is the smallest Arduino compatible board in the Seeeduino series.
- Fully compatible with Arduino IDE Seeed Studio XIAO development board is perfectly compatible with Arduino IDE and you can easily create small projects using the extensive and comprehensive Arduino library. It has a 2.54mm pin pitch and can be used even when inserted into a breadboard because it is an Arduino microcontroller.It has a 2.54mm pin pitch and can be used even when inserted into a breadboard because it is an Arduino microcontroller.
- Applications Seeed Studio XIAO is suitable for Wearable devices, Rapid prototyping, DIY keyboard, USB to multi-channel TTL/USB host mode, etc.
- Perfect for Wearable and Tiny Arduino Projects This microcontroller has good performance in processing but needs less power. As a matter of fact, it is designed in a tiny size and can be used for Arduino wearable devices and small projects.
- See more on Amazon...
Brand: seeed studio | Manufacturer: seeed studio
See On Amazon #10
MakerFocus 4pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module White I2C OLED Screen Driver DC 3.3V~5V for Ar duino ESP8266 ESP32 STM32
Asin: B08LQM9PQQ | Model: 20200330-SD8V | PartNumber: 20200330-SD8V
The Display Performance Is Better Than The Traditional Lcd Display, Also Lower Consumption; Iic (I2c Communications) Simplifies Connections..
We Have A Strong After-Sales Service Team: As Long As You Have Any Questions About The Product, We Will Resolve Your Issue Immediately If Received Your Email, Your Satisfactory Purchase Experience Is Our Greatest Hope! How To Email Us? Plz Click "Makerfocus" And Click "Ask A Question" To Email Us! Looking Forward To Your Consultation!.
Use With Ar Duino, Esp8266, Esp32, Stm32, Etc; 3.35V Power; Operating Temperature: -40 - 85 ℃; Resolution: 128 X 32..
Oled Display, No Need Backlight, Self-Illumination, Display Color: White. Plz Note: These I2c Oled Display Module Comes Without Pin Headers..
Features
- User Manual: You can contact us by order number and we will provide you with instructions
- OLED display, no need backlight, self-illumination, Display Color: White. Plz note: These I2C OLED Display Module comes without pin headers.
- The display performance is better than the traditional LCD display, also lower consumption; IIC (I2C communications) simplifies connections.
- Use with Ar duino, ESP8266, ESP32, STM32, etc; 3.35v Power; Operating temperature: -40 - 85 ; Resolution: 128 x 32.
- We have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click MakerFocus and click Ask a question to email us! Looking forward to your consultation!
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
See On Amazon #11
HiLetgo ESP32 OLED WiFi Kit V3 Type-C ESP-32 0.96 Inch Blue OLED Display WiFi+Bluetooth CP2012 Internet Development Board for Arduino ESP8266 NodeMCU
Asin: B07DKD79Y9 | Model: 8541612481 | PartNumber: 8541612481 | Ean: 0782429223290 | UPC: 782429223290
Esp32-S3fn8 Dual Core Processor.
Type-C Usb.
3.7V Lithium Battery Power Supply And Charging.
It’S A Highly Integrated Product Based On Esp32(Including Wifi And Ble).
Features
- WiFi kit 32 is a classic IoT Dev-board
- It s a highly integrated product based on ESP32(including WiFI and BLE)
- ESP32-S3FN8 dual core processor
- 3.7V lithium battery power supply and charging
- Type-C USB
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.71 x 3.86 x 2.28 Inches | Weight: 0.04 pounds
See On Amazon #12
HiLetgo 3pcs ESP32 Mini ESP-WROOM-32 Development Board WLAN WiFi Bluetooth IoT Development Board
Asin: B07BK435ZW | Model: 8541612412 | PartNumber: 8541612412
Input/Output Voltage: Dc 3.3V.
Sram: 520Kb External Flash.
I/O Pins: 34.
Power Supply Voltage: Dc 5V (Usb).
Features
- ESP32 Mini development board, everything needed to program the ESP32 module, ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino IDE.
- Power supply voltage: DC 5V (USB)
- Input/Output voltage: DC 3.3V
- I/O Pins: 34
- SRAM: 520KB External Flash
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.02 pounds
See On Amazon #13
HiLetgo ESP32 LCD WiFi Kit ESP-32 1.14 Inch LCD Display WiFi+Bluetooth CH9102 USB Type-C Internet Development Board for Arduino ESP8266 NodeMCU
Asin: B07X1W16QS | Model: 3-01-1530 | PartNumber: 3-01-1530
Sram: 520 Kb Sram.
Usb: Type-C.
Usb To Ttl: Ch9102.
Flash: Qspi Flash 4Mb.
Features
- Chipset: ESPRESSIF-ESP32 240MHz Xtensa single-/dual-core 32-bit LX6 Microprocessor
- FLASH: QSPI flash 4MB
- SRAM: 520 kB SRAM
- USB to TTL: CH9102
- USB: Type-C
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.33 x 2.02 x 0.98 Inches
See On Amazon #14
Seeed Studio XIAO nRF52840 Sense - Supports Arduino/CircuitPython - Bluetooth5.0 NFC with Onboard Antenna, MCU with 6-axis IMU Works with Amazon Sidewalk.
Asin: B09T94SZ8K
📌【Rich Interface】Firstly, The Near Field Communication(Nfc) Is Functional On The Board. Secondly, There Is A Tiny And Elegant Reset Button On One Side Of The Type-C Interface. It Is Designed In A Three-In-One Led Along With Power Led. It Supports Uart, Iic, And Spi All Three Common Serial Ports. Same As Seeed Xiao Rp2040, It Has An Onboard 2 Mb Flash Which Means It Can Also Be Programmed By Arduino, Micropython, Circuitpython, Or Other Program Languages..
📌【Ultra-Small Size】21 X 17.5Mm, Seeed Xiao Series Classic Form-Factor For Wearable Devices. Part List: Seeed Xiao Ble Sense - Nrf52840*1/7 Pins Header*2..
📌【Extra Onboard Sensors】One Of Them Is A Digital Microphone Created Through Pulse Density Modulation(Pdm) Module On The Nrf52840 Chip. It Can Receive Audio Data In Real-Time Which Allows It Can Be Used For Audio Recognition. The Board Not Only Receives Audio Data But Also Can Speak Through The Msm261d3526h1cpm Microphone. The Other One Is 6-Axis Inertial Measurement Unit(Imu) Which Can Be Applied In Tinyml Projects Like Gesture Recognition..
📌【Wireless Capabilities】Xiao Ble Sense Has Bluetooth 5.0 Nfc Module With Onboard Antenna. With The Capabilities Of Wireless Connection, It Still Remains The Seeed Xiao Series Classic Form-Factor Of Small And Exquisite Which Can Be Used For Wearable Devices And Internet Of Things Projects..
Features
- Powerful CPU As the advanced version of the board XIAO BLE, Seeed XIAO BLE Sense has equipped a powerful Nordic nRF52840 MCU which is designed in a Bluetooth 5.0 module, built around 32-bit ARM Cortex-M4 CPU with Floating-Point Unit(FPU) operating at 64Mhz.
- Wireless Capabilities XIAO BLE Sense has Bluetooth 5.0 NFC module with onboard antenna. With the capabilities of wireless connection, it still remains the Seeed XIAO series classic form-factor of small and exquisite which can be used for wearable devices and Internet of Things projects.
- Rich interface Firstly, the Near Field Communication(NFC) is functional on the board. Secondly, there is a tiny and elegant reset button on one side of the Type-C interface. It is designed in a three-in-one LED along with power LED. It supports UART, IIC, and SPI all three common serial ports. Same as Seeed XIAO RP2040, it has an onboard 2 MB flash which means it can also be programmed by Arduino, MicroPython, CircuitPython, or other program languages.
- Extra Onboard Sensors One of them is a digital microphone created through Pulse Density Modulation(PDM) module on the nRF52840 chip. It can receive audio data in real-time which allows it can be used for audio recognition. The board not only receives audio data but also can speak through the MSM261D3526H1CPM microphone. The other one is 6-axis Inertial Measurement Unit(IMU) which can be applied in TinyML projects like gesture recognition.
- Ultra-small Size 21 x 17.5mm, Seeed Xiao series classic form-factor for wearable devices. Part List: Seeed XIAO BLE Sense - nRF52840*1/7 Pins Header*2.
- See more on Amazon...
Brand: seeed studio | Manufacturer: seeed studio
See On Amazon #15
ESP32-S3 Microcontroller Development Board Onboard 4.3inch Capacitive Touch Display 800x480 Pixel, Supports 2.4GHz WiFi and BLE 5, Multiple Peripherals via Sensor, CAN, RS485, and I2C Interfaces
Asin: B0CP3DYJ5K
Built In 512Kb Of Sram And 384Kb Rom, With Onboard 8Mb Psram And 8Mb Flash..
Supports Capacitive Touch Control Via I2c Interface, 5-Point Touch With Interrupt Support. Onboard Can, Rs485, I2c Interface And Tf Card Slot, Integrates Full-Speed Usb Port..
Onboard 4.3Inch Capacitive Touch Display, 800×480 Resolution, 65K Color. Can Smoothly Run Gui Programs Such As Lvgl..
Equipped With Xtensa 32-Bit Lx7 Dual-Core Processor, Up To 240Mhz Main Frequency. Supports 2.4Ghz Wi-Fi (802.11 B/G/N) And Bluetooth 5 (Le), With An Onboard Antenna..
Features
- ESP32-S3-Touch-LCD-4.3 integrates RGB interface LCD with 5-point capacitive touch, multiple peripheral interfaces.
- Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with an onboard antenna.
- Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash.
- Onboard 4.3inch capacitive touch display, 800 480 resolution, 65K color. Can smoothly run GUI programs such as LVGL.
- Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port.
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
See On Amazon #16
YEJMKJ 2pcs ESP32 CAM Development Board ESP32-CAM 8MP OV2640 Camera Module, WiFi Bluetooth Module ESP32-CAM-MB Micro USB to Serial Port CH340G with TF Card Slot for Raspberry Pi for Arduino
Asin: B0CDRLTXMW | Ean: 0747607873964 | UPC: 747607873964
[Versatile Gpio Pins]: The Esp32-Cam Board Comes With A Rich Set Of Gpio Pins, Allowing You To Connect And Control Various Sensors, Actuators, And External Devices. This Versatility Opens Up Countless Possibilities For Creating Interactive And Responsive Projects..
[Easy Programming And Development]: The Esp32-Cam Module Is Compatible With Arduino Ide, Making It Easy For Both Beginners And Experienced Developers To Program And Develop Projects..
[Compact & Portable]: The Wifi Bluetooth Panel Is Compact In Size, Making It Ideal For Projects That Require A Small Form Factor. Its Portability Allows You To Take Your Projects On The Go And Explore Various Applications Where Space Is Limited..
[Powerful Connectivity]: Equipped With Esp32 Wi-Fi And Bluetooth Module, The Esp32-Cam Development Board Offers Seamless Wireless Connectivity. You Can Easily Connect It To Your Home Network Or Mobile Device, Enabling Remote Control And Data Transmission..
Features
- [High Resolution Imaging]: The ESP32-CAM development board is equipped with a high-resolution camera module, allowing you to capture images and videos with exceptional clarity and detail. It enables you to create projects that require accurate visual data.
- [Powerful Connectivity]: Equipped with ESP32 Wi-Fi and Bluetooth module, the ESP32-CAM development board offers seamless wireless connectivity. You can easily connect it to your home network or mobile device, enabling remote control and data transmission.
- [Versatile GPIO Pins]: The ESP32-CAM board comes with a rich set of GPIO pins, allowing you to connect and control various sensors, actuators, and external devices. This versatility opens up countless possibilities for creating interactive and responsive projects.
- [Compact & Portable]: The wifi bluetooth panel is compact in size, making it ideal for projects that require a small form factor. Its portability allows you to take your projects on the go and explore various applications where space is limited.
- [Easy Programming and Development]: The ESP32-CAM module is compatible with Arduino IDE, making it easy for both beginners and experienced developers to program and develop projects.
- See more on Amazon...
Brand: YEJMKJ | Manufacturer: YEJMKJ
Dimensions: 0.78 x 1.59 x 1.06 Inches
Warranty: 3 months
See On Amazon #17
ESP32-S3 MCU Board with Onboard 1.28inch Round Touch LCD and 6-Axis Sensor etc, 32-bit LX7 Dual-Core Processor, Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), Type-C Port
Asin: B0CM6JCJ2H
Onboard 1.28Inch Capacitive Touch Display, 240×240 Resolution, 65K Color..
Onboard 3.7V Batt Recharge/Discharge Header And 6 × Gpio Pins Via Sh1.0 Connector..
Onboard Qmi8658 6-Axis Imu (3-Axis Accelerometer And 3-Axis Gyroscope) For Detecting Motion Gesture..
Equipped With Xtensa 32-Bit Lx7 Dual-Core Processor, Up To 240Mhz Main Frequency. Supports 2.4Ghz Wi-Fi (802.11 B/G/N) And Bluetooth 5 (Le), With Onboard Antenna. Built In 512Kb Of Sram And 384Kb Rom, With Onboard 2Mb Psram And An External 16Mb Flash Memory..
Features
- ESP32-S3-Touch-LCD-1.28 is ESP32-S3 Development MCU Board with onboard 1.28inch round capacitive touch display, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope),etc. Embedded GC9A01 Display Driver And CST816S Capacitive Touch Control Chip.
- Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory.
- Onboard 1.28inch capacitive touch display, 240 240 resolution, 65K color.
- Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture.
- Onboard 3.7V batt recharge/discharge header and 6 GPIO pins via SH1.0 connector.
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
See On Amazon #18
Aideepen ESP32-CAM W-BT Board ESP32-CAM-MB Type-C to Serial Port CH-340G with OV2640 2MP Camera Module Dual Mode Support NodeMCU 2PCS.
Asin: B0CMTW3CTD | Model: No | PartNumber: No
【Useful】The Hk-Esp32-Cam-Mb Module Is A Small Camera Module With A Size Of 39.8Mm*27Mm,Our Esp32 Cam Can Work Independently As Smallest System And Also Support Secondary Development..
【Get Support】We Have Always Cared About The Customer Experience And Improve The Product Function Details,Please Feel Free To Contact Us..
【Ultra-Low Power Consumption】 Deep Sleep Current Is As Low As 6Ma. It Is An Ultra-Small 802.11B/G/N W+ Bt/Ble Soc Module..
【Esp32-Cam】A New W-Bt Dual-Mode Development Board Based On Esp32 Design, Using Pcb On-Board Antenna, With 2 High-Performance 32-Bit Lx6cpu, Using 7-Level Pipeline Architecture, Main Frequency Adjustment Range 80Mhz To 240Mhz..
Features
- Upgrade HK-ESP32-CAM-MB adopts Type-C interface, After the upgrade, the firmware connection is convenient and reliable, suitable for various IoT hardware terminal occasions
- ESP32-CAM A new W-BT dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz.
- Useful The HK-ESP32-CAM-MB module is a small camera module with a size of 39.8MM*27MM,our esp32 cam can work independently as smallest system and also Support secondary development.
- Ultra-low power consumption deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n W+ BT/BLE SoC module.
- Get support We have always cared about the customer experience and improve the product function details,please feel free to contact us.
- See more on Amazon...
Brand: Aideepen | Manufacturer: Aideepen
Dimensions: 0.79 x 1.57 x 1.06 inches
Warranty: No
See On Amazon #19
HiLetgo 3pcs ESP32 GPIO Board ESP32S Pin Out IO Out 1 into 2 for ESP32 ESP32S Development Board
Asin: B0B56ZY64Q | Model: 3-01-1315 | PartNumber: 3-01-1315
Gpio 1 Into 2.
Esp32 Can Be Connected Through By Pin Header & Screw Terminal.
Features
- 38PIN ESP32 GPIO expansion board
- ESP32 can be connected through by Pin Header & Screw Terminal
- GPIO 1 INTO 2
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 3.07 x 2.48 x 2.48 inches
See On Amazon
Looking For Something Else?
Search