Bomeek 2 Pieces Extension only Fits S&W M&P 9mm Shield EZ M2.0 Single Stack Black
Asin: B0C6FBSC7M
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Does Not Alter Capacity..
It Adds Approximately 1/2" Inch Additional Gripping Surface With Enhanced Ergonomics..
Note: Will Not Work On S&W M&P Shield & Shield 2.0 9Mm And 40 Cal. Will Not Work On S&W M&P Shield M2.0 .45Acp. Will Not Work On M&P 9 Shield Plus,Will Not Work On M&P 380 Shield Ez.Does Not Work S&W .45 Compact.
The Extensions Are Made From High Impact Resistant Polymer.
They Form The Next Logical Finger Positioning Feature To Provide Control And Comfort Without Sacrificing Conceal Ability..
Features
- 2 Pieces Will only Fits S&W M&P 9mm Shield EZ M2.0 single stack
- They form the next logical finger positioning feature to provide control and comfort without sacrificing conceal ability.
- Does not alter capacity.
- The extensions are made from high impact resistant polymer
- It adds approximately 1/2 inch additional gripping surface with enhanced ergonomics.
- Note: Will not work on S&W M&P SHIELD & SHIELD 2.0 9mm and 40 cal. Will not work on S&W M&P Shield M2.0 .45ACP. Will not work on M&P 9 SHIELD PLUS,Will not work on M&P 380 SHIELD EZ.Does not work S&W .45 compact
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
See On Amazon Similar To Bomeek 2 Pieces Extension only
#1
Bomeek 3 Pieces Bottom Grip Rear Cavity Frame Insert Plug for Glock(Gen 1/2/3) Mid and Full Size Models 17,18,19,20,21,22,23,24,31,32,34,35,37,38 Black
Asin: B0B7R5QNDN
Provides A Clean Finished Look To The Heel Of The Frame..
Engineered For Speed, Beveled For Fast Reloads..
This Unit Installs In The Bottom Rear Cavity Of The Frame Utilizing The Lanyard Hole For Retention..
Flush Fit To Eliminate The Possibility Of Snagging On The Open Cavity..
Helps Keep Debris/Rain/ Snow/ Lint Etc Out Of The Back Cavity..
Features
- 3 Pieces fits GLOCK(Gen 1/2/3) Mid and Full Size models 17,18,19,20,21,22,23,24,31,32,34,35,37,38 Black
- Helps keep debris/rain/ snow/ lint etc out of the back cavity.
- Provides a clean finished look to the heel of the frame.
- Flush fit to eliminate the possibility of snagging on the open cavity.
- Engineered for speed, beveled for fast reloads.
- This unit installs in the bottom rear cavity of the frame utilizing the lanyard hole for retention.
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
See On Amazon #2
Bomeek 2 Pieces Universal Right & Left Hand Extended Magnetic Pocket Clip Fits 9mm/.40 S&W and.357 Sig Double & Single Stack for Extended Mag-azine or Deeper Concealment Carry
Asin: B0BHNVYTY7
To Help Keep The Magazine In Place, The Retainer Has Wings On Either The Sides To Keep The Magazine From Slipping Off And Force The User To Slide It Up Vertically In A Perfect Draw Stroke..
Note:Test Your Magazine To Make Sure It Is Magnetic,Designed For Use With Metal Magazines Only, Glock 19 - 10 Rd Mags Do Not Hold Very Well Compatible,If You Have A Springfield Xd Test Your Magazine To Make Sure It Is Magnetic.(Most Extended Are Not Magnetic),Works Only Inside The Pocket -- Does Not Work Outside-The-Waistband - On A Belt..
Machined Steel With Blacknitride Finish,So There Isn't Much To Break, And The Clip Attaches With Two Stainless Steel Black Oxide Torx Head Fasteners,The Would Last Longer Under Hard Conditions..
The Super Tight Clip Ensures That It Won't Come Off, Provide More Grip On The Pocket,You Could Carry It In Any Pocket Front Or Back,Universal Usable For A Right-Hand Or Left-Hand Draw..
The Is Has A Rubber Pad Underneath The Clip,This Keeps The Clip In Place No Matter Where You Place The In Your Pocket..
The Uses An N35-N52 Grade Neodymium Magnet Producing Eight Pounds Of Pull At Operating Temperatures Up To 100 Degree Celsius,In Addition To A N35-N52 Grade Neodymium Magnet Does A Good Job Of Holding The Magazine,And Not Have It Slip Off And Bounce Around In A Pocket..
Features
- 2 Pieces Black extended magnetic magazine Pocket holder is designed specifically for Standard Single & Double Stack 9MM/.40 S&W and .357 Sig metal magnetic magazines for extended mag-azines or deeper concealment Carry.
- The uses an N35-N52 grade neodymium magnet producing eight pounds of pull at operating temperatures up to 100 degree Celsius,in addition to a N35-N52 grade neodymium magnet does a good job of holding the magazine,and not have it slip off and bounce around in a pocket.
- To help keep the magazine in place, the retainer has wings on either the sides to keep the magazine from slipping off and force the user to slide it up vertically in a perfect draw stroke.
- The is has a rubber pad underneath the clip,This keeps the clip in place no matter where you place the in your pocket.
- Machined steel with Blacknitride finish,so there isn't much to break, and the clip attaches with two Stainless Steel Black Oxide Torx head fasteners,the would last longer under hard conditions.
- The super tight clip ensures that it won't come off, provide more grip on the pocket,you could carry it in any pocket front or back,Universal usable for a right-hand or left-hand draw.
- NOTE:test your magazine to make sure it is magnetic,designed for use with metal magazines only, glock 19 - 10 rd mags do not hold very well compatible,if you have a Springfield XD test your magazine to make sure it is magnetic.(Most extended are not magnetic),works only inside the pocket -- Does NOT work outside-the-waistband - on a belt.
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
Weight: 0.20 pounds
See On Amazon #3
Bomeek 2 Pieces Universal Standard Magnetic Pocket Clip Fits:9mm/.40 and.357 Sig Double&Single Stack|.45 Double&Single Stack|.380 Double&Single Stack,for Right & Left Hand Concealed Carry
Asin: B0B6V3VQKP
To Help Keep The Magazine In Place, The Retainer Has Wings On Either The Sides To Keep The Magazine From Slipping Off And Force The User To Slide It Up Vertically In A Perfect Draw Stroke..
Note:Test Your Magazine To Make Sure It Is Magnetic,Designed For Use With Metal Magazines Only, Glock 19 - 10 Rd Mags Do Not Hold Very Well Compatible,If You Have A Springfield Xd Test Your Magazine To Make Sure It Is Magnetic.(Most Extended Are Not Magnetic),Works Only Inside The Pocket -- Does Not Work Outside-The-Waistband - On A Belt..
Machined Steel With Blacknitride Finish,So There Isn't Much To Break, And The Clip Attaches With Two Stainless Steel Black Oxide Torx Head Fasteners,The Would Last Longer Under Hard Conditions..
But The Super Tight Clip Ensures That It Won't Come Off, Provide More Grip On The Pocket,You Could Carry It In Any Pocket Front Or Back,Universal Usable For A Right-Hand Or Left-Hand Draw..
The Is Has A Rubber Pad Underneath The Clip,This Keeps The Clip In Place No Matter Where You Place The In Your Pocket..
The Uses An N35-N52 Grade Neodymium Magnet Producing Eight Pounds Of Pull At Operating Temperatures Up To 100 Degree Celsius,In Addition To A N35-N52 Grade Neodymium Magnet Does A Good Job Of Holding The Magazine,And Not Have It Slip Off And Bounce Around In A Pocket..
Features
- 2 Pieces Black Standard Magnetic Pocket Mag is designed specifically for Standard Single & Double Stack 9MM/.40 S&W and .357 Sig metal magnetic magazines
- The uses an N35-N52 grade neodymium magnet producing eight pounds of pull at operating temperatures up to 100 degree Celsius,in addition to a N35-N52 grade neodymium magnet does a good job of holding the magazine,and not have it slip off and bounce around in a pocket.
- To help keep the magazine in place, the retainer has wings on either the sides to keep the magazine from slipping off and force the user to slide it up vertically in a perfect draw stroke.
- The is has a rubber pad underneath the clip,This keeps the clip in place no matter where you place the in your pocket.
- Machined steel with Blacknitride finish,so there isn't much to break, and the clip attaches with two Stainless Steel Black Oxide Torx head fasteners,the would last longer under hard conditions.
- but the super tight clip ensures that it won't come off, provide more grip on the pocket,you could carry it in any pocket front or back,Universal usable for a right-hand or left-hand draw.
- NOTE:test your magazine to make sure it is magnetic,designed for use with metal magazines only, glock 19 - 10 rd mags do not hold very well compatible,if you have a Springfield XD test your magazine to make sure it is magnetic.(Most extended are not magnetic),works only inside the pocket -- Does NOT work outside-the-waistband - on a belt.
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
Weight: 0.20 Pounds
See On Amazon #4
Bomeek Grips, 2 Pieces Extension only Fits S&W M&P 380acp Shield EZ Single Stack Black
Asin: B0C37HKXD3
Does Not Alter Capacity..
It Adds Approximately 1/2" Inch Additional Gripping Surface With Enhanced Ergonomics..
The Extensions Are Made From High Impact Resistant Polymer.
They Form The Next Logical Finger Positioning Feature To Provide Control And Comfort Without Sacrificing Conceal Ability..
Features
- 2 Pieces Will only Fits Single Stack S&W M&P 380acp Shield EZ.
- They form the next logical finger positioning feature to provide control and comfort without sacrificing conceal ability.
- Does not alter capacity.
- The extensions are made from high impact resistant polymer
- It adds approximately 1/2 inch additional gripping surface with enhanced ergonomics.
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
See On Amazon #5
Bomeek Grips, 2 Pieces Extension Fits Beretta Nano Black
Asin: B0C37HR3K6
Does Not Alter Capacity..
It Adds Approximately 3/4" Inch Additional Gripping Surface And Incorporates The Factory Checkering ..
Made From High Impact Polymer..
They Form The Next Logical Finger Positioning Feature To Provide Control And Comfort Without Sacrificing Conceal Ability..
Features
- 2 Pieces Will only Fits BERETTA NANO.
- They form the next logical finger positioning feature to provide control and comfort without sacrificing conceal ability.
- Does not alter capacity.
- Made from High Impact Polymer.
- It adds approximately 3/4 inch additional gripping surface and incorporates the factory checkering .
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
See On Amazon #6
Bomeek Grips, 2 Pieces Extension Fits Standard 6rd S&W M&P Shield M2.0 .45ACP Black
Asin: B0B71CQ8HS
Adds Approximately 3/4" Inch Additional Gripping Surface..
They Form The Next Logical Finger Positioning Feature To Provide Control And Comfort Without Sacrificing Conceal Ability..
Note: Will Not Work On S&W M&P Shield & Shield 2.0 9Mm And 40 Cal. Will Not Work On M&P 9Mm Shield Ez. Will Not Work On M&P 9 Shield Plus,Will Not Work On M&P 380 Shield Ez.Does Not Work W/ S&W .45 Compact.
The Enhanced Griping Surface Also Incorporates A Texture Which Closely Matches The Frame Of The ..
Does Not Alter Capacity..
Features
- 2 Pieces Will only work Fits Standard 6 rd S&W M&P Shield M2.0 .45ACP.
- Does not alter capacity.
- Adds approximately 3/4 inch additional gripping surface.
- The enhanced griping surface also incorporates a texture which closely matches the frame of the .
- They form the next logical finger positioning feature to provide control and comfort without sacrificing conceal ability.
- Note: Will not work on S&W M&P SHIELD & SHIELD 2.0 9mm and 40 cal. Will not work on M&P 9mm SHIELD EZ. Will not work on M&P 9 SHIELD PLUS,Will not work on M&P 380 SHIELD EZ.Does not work w/ S&W .45 compact
- See more on Amazon...
Brand: Bomeek | Manufacturer: Bomeek
See On Amazon
Looking For Something Else?
Search