SKTREX 6 Wheel Trolley Assembly M5 Thread Rollers Four Bearing Trolley Assembly for 1-5/8" Wide and All 1-5/8" or Taller Strut Channel (4)
Asin: B0C6GK8K1J | Model: R5 | PartNumber: R5 | Ean: 0789513917080 | UPC: 789513917080
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.✅Detailed Material: Our Wheel Trolley Is Mainly Made Of Galvanized And Strengthened Solid Steel, Which Can Resist Impact And Corrosion, Prevent Itself From Rusting, It Is Also Sturdy, And Has A Long Service Life.Suitable For Door Installation, Diy Design..
✅Strong Load:There Are 6 Bearings To Allow The Wheel Trolley To Have Higher Loads, Which Can Provide Weight Support Of About 1800 Pounds, And It Is Not Easy To Break, Can Serve You For A Long Time.Our Bearing Strut Trolleys Not Only Be Cost-Efficient But Also Made To Handle Heavy Duty Use Even In The Long Run..
✅Operate Steadily: Wheel Trolley Standard Deep Groove Ball Bearing Installation, Is Very Smooth No Noise To It When Used.Bearing Welding Positioning, To Ensure The Stability Of The Work..
✅Using Simple:There Are3 Mounting Holes On The Underside Of The Wheel Trolley, Which Are Conveniently Positioned To Install Screws Without Interference..
Features
- PARAMETER: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, Bolt mounting hole M5,Each Wheel Trolley comes with 6 M5 bolts
- USING SIMPLE:There are3 mounting holes on the underside of the Wheel Trolley, which are conveniently positioned to install screws without interference.
- DETAILED MATERIAL: our wheel trolley is mainly made of galvanized and strengthened solid steel, which can resist impact and corrosion, prevent itself from rusting, it is also sturdy, and has a long service life.Suitable for door installation, DIY design.
- OPERATE STEADILY: Wheel Trolley Standard deep groove ball bearing installation, is very smooth no noise to it when used.Bearing welding positioning, to ensure the stability of the work.
- STRONG LOAD:There are 6 bearings to allow the Wheel Trolley to have higher loads, which can provide weight support of about 1800 pounds, and it is not easy to break, can serve you for a long time.Our bearing strut trolleys not only be cost-efficient but also made to handle heavy duty use even in the long run.
- See more on Amazon...
Brand: SKTREX | Manufacturer: SKTREX
Dimensions: 2.00 x 3.03 x 1.50 inches
See On Amazon Similar To SKTREX 6 Wheel Trolley Assembly
#1
SKTREX Trolley Roller Wheels Limit Trolley Assembly Positioning for Unistrut Strut Channel with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel Pack of 2
Asin: B0B9XMBV4V | Model: C | PartNumber: C | Ean: 0732404206022 | UPC: 732404206022
【Easy To Install】 This Hexagon Nut Only Needs To Be Tightened, And It Can Be Locked Into Place With The Strut Channel. Simple Structure, Easy Installation..
【Package Included】Comes In A Convenient, Money-Saving Pack Of Two..
【Quality Service】If You Have Any Issues With The Trolley Roller Limit Then Just Let Us Know And We Will Solve It For You Within 24 Hours To Ensure You Are Completely Satisfied..
【Impact-Resistant】 Trolley Roller Limit Uses Large Rubber Blocks And M10 Screws For Better Impact Resistance And Reduced Vibration To Protect The Trolley Assembly..
【Special Design】 Trolley Roller Limit For Use With 1-5/8" Wide And All 1-5/8" Or Taller Strut Channel, The Stopper Is Used To Restrict The Movement Of The Trolley Roller And Keep The Trolley Assembly From Detaching From The Strut Channel..
Features
- patented design The patented design of Trolley Roller Wheels Limit has been granted a US patent, assuring customers of its authenticity and reliability.
- Special design Trolley Roller Limit for use with 1-5/8 Wide and All 1-5/8 or Taller Strut Channel, The stopper is used to restrict the movement of the trolley roller and keep the trolley assembly from detaching from the strut channel.
- Easy to install This hexagon nut only needs to be tightened, and it can be locked into place with the Strut Channel. Simple structure, easy installation.
- Impact-resistant Trolley Roller Limit uses large rubber blocks and M10 screws for better impact resistance and reduced vibration to protect the trolley assembly.
- Package included Comes in a convenient, money-saving pack of two.
- Quality Service If you have any issues with the Trolley Roller Limit then just let us know and we will solve it for you within 24 hours to ensure you are completely satisfied.
- See more on Amazon...
Brand: SKTREX | Manufacturer: SKTREX
Dimensions: 1.83 x 1.38 x 1.38 inches
See On Amazon #2
SKTREX 6 Wheel Hoist Trolley with Rollers - Strut Trolley Assembly for Electric Hoist - Fits 1-5/8" Wide and Taller Strut Channel - High Strength and Silent Operation
Asin: B0C9PTKN7J | Model: 6T2 | PartNumber: 6T2 | Ean: 0747302395266 | UPC: 747302395266
[Durable Material] The Intermediate Support Is Constructed Of Solid Steel, Providing Impact Resistance And High Strength, While The Galvanized Zinc Coating Offers Rust Protection For Long-Lasting Use..
[Easy Installation] The Electric Hoist Roller Trolley Can Be Easily Installed And Set Up For Use With A Wide Range Of Lifting Applications, Making It A Practical Addition To Any Workspace..
[Designed For Electric Hoist Installation] This 8 Wheel Roller Trolley Offers Reliable Lifting And Placements, Making It Perfect For Warehouses, Garage Sites And More..
[Two Way Moving Installation] Our Assembly Allows 2-Way Movement Installation With The Strut Channel, Providing The Flexibility To Work In Multiple Positions..
Features
- [Design load] 6-wheel design of this hoist trolley ensures steady operation and withstands impacts, 380 lbs at 600 rpm; 560 lbs at 300 rpm; 980 lbs at 100 rpm. Break strength: 6613 lbs.
- [Two Way Moving Installation] Our assembly allows 2-way movement installation with the Strut Channel, providing the flexibility to work in multiple positions.
- [Durable Material] The intermediate support is constructed of solid steel, providing impact resistance and high strength, while the galvanized zinc coating offers rust protection for long-lasting use.
- [Designed for electric hoist installation] this 8 wheel roller trolley offers reliable lifting and placements, making it perfect for warehouses, garage sites and more.
- [Easy Installation] The electric hoist roller trolley can be easily installed and set up for use with a wide range of lifting applications, making it a practical addition to any workspace.
- See more on Amazon...
Brand: SKTREX | Manufacturer: SKTREX
Dimensions: 4.00 x 4.99 x 5.40 inches
See On Amazon #3
SKTREX 4 Wheel Silent Trolley Assembly Rollers Four Bearing Trolley Assembly for 1-5/8" Wide and All 1-5/8" or Taller unistrut Strut Channel with M10 Bolt and Lifting Eye Nuts
Asin: B0BYV639Q7 | Model: M10 | PartNumber: M10 | Ean: 0751501539444 | UPC: 751501539444
✔️【Trolleys Size】M10 (3/8Inch) Bolt In The Middle, 80Mm (3.15Inch) In Length.For Use With 1-5/8" Wide And All 1-5/8" Or Taller Strut Channel..
✔️【Quality Service】For Use With 1-5/8" Wide And All 1-5/8" Or Taller Strut Channel.If You Have Any Issues With The Wheel Trolley Then Just Let Us Know And We Will Solve It For You Within 24 Hours To Ensure You Are Completely Satisfied..
✔️【Rust-Proof Design】Channel Trolley Body Hot-Dip Electrogalvanized Steel,Eye Nut And M10 Bolt Are Made Of Stainless Steel..
✔️【Design Load】320 Lbs At 600 Rpm; 450 Lbs At 300 Rpm; 650 Lbs At 100 Rpm. Break Strength: 5511 Lbs..
Features
- Heavy-Duty Build Bearing Trolley Assembly Made with Hot-Rolled Carbon Steel of solid steel for impact resistance. Galvanized to ensure rust resistance of wheeled trolleys. Smooth and noiseless during use, bearings and pins are firmly welded, work stably, Resulting In Incredible Strength and Quality!
- Design load 320 lbs at 600 rpm; 450 lbs at 300 rpm; 650 lbs at 100 rpm. Break strength: 5511 lbs.
- Trolleys Size M10 (3/8inch) Bolt in the middle, 80mm (3.15inch) in length.For use with 1-5/8 Wide and All 1-5/8 or Taller Strut Channel.
- Rust-proof design Channel Trolley body hot-dip electrogalvanized steel,Eye nut and M10 bolt are made of stainless steel.
- Quality Service For use with 1-5/8 Wide and All 1-5/8 or Taller Strut Channel.If you have any issues with the Wheel Trolley then just let us know and we will solve it for you within 24 hours to ensure you are completely satisfied.
- See more on Amazon...
Brand: SKTREX | Manufacturer: SKTREX
Dimensions: 4.00 x 3.00 x 1.00 inches
See On Amazon #4
Acemaker 2pcs Hoist Trolley for PA200-1000 Electric Hoist, 8 Wheels Trolley Assembly for use with Unistrut 1-5/8" or Taller Strut Channels, Silent Manual Trolley Rollers Overhead Garage Hoist System
Asin: B0BM4WF1RF | Model: ACE02-8 | PartNumber: ACE02-8
For 1-5/8 Inch Strut Channels - Acemaker Wheel Trolleys Are Suitable For 1-5/8 Inch (About 4.4 Cm) Wide And All 1-5/8 Inch (About 4.6 Cm) Or Taller Strut Channels. Tip: If The Fixing Screw For The Strut Channel Is Installed Inside The Track, The Trolley May Not Be Able To Pass. We Recommended You Choose A Taller Strut Channel Or Install The Bolt Outside The Track..
Double Moving Choices - Can Be Used With The Pillar Channels To Set Two Movement Directions, So That The Crane Can Work In Multiple Positions. Tip: Please Be Sure To Take Into Account All Of Your Rigging, Fasteners, And Gantry When Calculating Your Loads!.
Fit Pa200-Pa1000 Electric Hoists - There Are Wide Mounting Holes At The Bottom. During Installation, You Can Adjust The Distance Of The Mounting Screws To Meet The Location Requirements Of Different Types Of Electric Hoists..
Safe, Stable & Smooth - Built-In 8 Sus420 Stainless Steel Bearings, Features A Welded Bearing And Pin Shaft To Offer More Stability For Safe Use, And Work Smoothly Without Making Any Noise. Pls Knows That 8 Wheels Trolleys Are More Stable Than 6 Wheels And 4 Wheels Trolleys..
Features
- 2800LBS HIGH LOAD CAPACITY - Made of high-strength carbon steel using the CNC precision machining process with a full penetration Weld. Each Acemaker wheel trolley provides up to 1.26 tons / 2800 lbs loading capacity(with SGS test certification).
- SAFE, STABLE & SMOOTH - Built-in 8 SUS420 stainless steel bearings, features a welded bearing and pin shaft to offer more stability for safe use, and work smoothly without making any noise. Pls knows that 8 wheels trolleys are more stable than 6 wheels and 4 wheels trolleys.
- FOR 1-5/8 INCH STRUT CHANNELS - Acemaker Wheel trolleys are suitable for 1-5/8 inch (about 4.4 cm) wide and all 1-5/8 inch (about 4.6 cm) or taller strut channels. TIP: If the fixing screw for the strut channel is installed inside the track, the trolley may not be able to pass. We recommended you choose a taller strut channel or install the bolt outside the track.
- FIT PA200-PA1000 ELECTRIC HOISTS - There are wide mounting holes at the bottom. During installation, you can adjust the distance of the mounting screws to meet the location requirements of different types of electric hoists.
- DOUBLE MOVING CHOICES - Can be used with the pillar channels to set two movement directions, so that the crane can work in multiple positions. TIP: Please be sure to take into account all of your rigging, fasteners, and gantry when calculating your loads!
- See more on Amazon...
Brand: Acemaker | Manufacturer: Acemaker
Dimensions: 6.10 x 8.50 x 6.10 inches | Weight: 4.50 Pounds
See On Amazon #5
2 Wheel Trolley Assembly Rollers Two Bearing Trolley Assembly for 1-5/8" Wide and All 1-5/8" or Taller Strut Channel
Asin: B09M8XM92Q | Model: FG-8444111501 | PartNumber: FG-8444111501 | Ean: 0721927146700 | UPC: 721927146700
✔️【Design Load】150 Lbs At 600 Rpm; 220 Lbs At 300 Rpm; 280 Lbs At 100 Rpm. Break Strength: 2200 Lbs.
✔️【Quality Service】If You Have Any Issues With The Trolley Assembly 2 Wheels Then Just Let Us Know And We Will Solve It For You Within 24 Hours To Ensure You Are Completely Satisfied..
✔️【Versatility】You Can Use It To Install Ceiling Trolley Systems Or Electric Lifts, Or Use It In Your Diy Projects, Can Use Upside Down..
✔️【Trolleys Size】Steel Plate Hole Diameter-9/16”(14Mm); Thickness-1/4”(6Mm).For Use With 1-5/8" Wide And All 1-5/8" Or Taller Strut Channel..
Features
- Heavy-Duty Build Two Bearing Trolley Assembly Made with Hot-Rolled Carbon Steel of solid steel for impact resistance. Galvanized to ensure rust resistance of wheeled trolleys. Smooth and noiseless during use, bearings and pins are firmly welded, work stably, Resulting In Incredible Strength and Quality!
- Trolleys Size Steel plate hole diameter-9/16 (14mm); thickness-1/4 (6mm).For use with 1-5/8 Wide and All 1-5/8 or Taller Strut Channel.
- Design load 150 lbs at 600 rpm; 220 lbs at 300 rpm; 280 lbs at 100 rpm. Break strength: 2200 lbs
- Versatility You can use it to install ceiling trolley systems or electric lifts, or use it in your DIY projects, Can use upside down.
- Quality Service If you have any issues with the trolley assembly 2 wheels then just let us know and we will solve it for you within 24 hours to ensure you are completely satisfied.
- See more on Amazon...
Brand: SKTREX | Manufacturer: SKTREX
Weight: 0.93 pounds
See On Amazon #6
Electric Hoist Installation Roller Trolley for 1-5/8" Wide and All 1-5/8", Trolley Assembly Silent Electric Hoist Trolley for Taller Strut Channel (Ring Style, 4 Pcs)
Asin: B0C4PSS6XG
Strong Load: Our Hoist Trolley Has Solid Bearing Steel Pin Shaft In The Pillar Channel, Which Can Provide Weight Support Of About 550 Pounds, And It Is Not Easy To Break, Can Serve You For A Long Time.
Easy To Fit: Our Wheel Trolley Assembly Is Suitable For 1-5/8" Wide And All 1-5/8" Or Taller Strut Channel, Can Be Applied To Install Ceiling Trolley System Or Electric Lift, Bringing You A Lot Of Convenience.
Low Noise: Our Silent Electric Hoist Trolley Uses Deep Groove Ball Bearings To Ensure That You Can Operate It Smoothly Without Making Too Much Noise, Providing High Stability While Running In Low Noise.
Detailed Material: Our Wheel Trolley Is Mainly Made Of Galvanized And Strengthened Solid Steel, Which Can Resist Impact And Corrosion, Prevent Itself From Rusting, It Is Also Sturdy, And Has A Long Service Life.
Features
- Package Includes: you will receive 4 pieces of trolley assemblies, which are easy to install and suitable for long term use, they can well meet your daily work needs, please use the support channel horizontally
- Detailed Material: our wheel trolley is mainly made of galvanized and strengthened solid steel, which can resist impact and corrosion, prevent itself from rusting, it is also sturdy, and has a long service life
- Strong Load: our hoist trolley has solid bearing steel pin shaft in the pillar channel, which can provide weight support of about 550 pounds, and it is not easy to break, can serve you for a long time
- Low Noise: our silent electric hoist trolley uses deep groove ball bearings to ensure that you can operate it smoothly without making too much noise, providing high stability while running in low noise
- Easy to Fit: our wheel trolley assembly is suitable for 1-5/8 wide and all 1-5/8 or taller strut channel, can be applied to install ceiling trolley system or electric lift, bringing you a lot of convenience
- See more on Amazon...
Brand: Tudomro | Manufacturer: Tudomro
See On Amazon #7
Fuperoo 2Wheel Trolley Assembly Rollers.Bearing Trolley Assembly.The top of The Trolley has Room for Set Screws, Allowing The use of a 1-5/8" high Strut Channel
Asin: B0CL9LBPVZ | Model: TWO hole 2 Wheel Trolley Assembly 4pcs | PartNumber: TWO hole 2 Wheel Trolley Assembly 4pcs
Quality Of Unistrut Rollers: Made Of Q235 Alloy Steel, Galvanized Process. Adopt Rubber Ring Seal Bearing, With Good Sealing And Long Service Life. Solid Steel Pin, With Super Load Bearing Capacity, Safe And Reliable..
The E-2Wheel Trolley Is Available In 1-Piece, 2-Piece, 4-Piece, 10-Piece And 20-Piece Packages. Visit The Store For More Styles Of Strut Channel Trolley.
Trolley Assembly For Use With P1000, P1001 , P5000, P5001, P5500, P5501 And All 1-5/8" Or Taller Strut Channel.
Features
- Quantity: 4PCS.Maximum Load 500lbs/1PCS
- Trolley assembly for use With P1000, P1001 , P5000, P5001, P5500, P5501 and All 1-5/8 or Taller Strut Channel
- Quality of unistrut rollers: made of Q235 alloy steel, galvanized process. Adopt rubber ring seal bearing, with good sealing and long service life. Solid steel pin, with super load bearing capacity, safe and reliable.
- The E-2Wheel Trolley is available in 1-piece, 2-piece, 4-piece, 10-piece and 20-piece packages. Visit the store for more styles of strut channel trolley
- See more on Amazon...
Brand: Fuperoo | Manufacturer: Fuperoo
Dimensions: 3.54 x 1.18 x 1.29 Inches | Weight: 1.46 Pounds
See On Amazon #8
2Pcs 6 Wheel Trolley Assembly Rollers Six Bearing Trolley Assembly for unistrut 1-5/8" Wide and All 1-5/8" or Taller Strut Channel
Asin: B09M8VH1RJ | Model: GH-85848494898 | PartNumber: GH-85848494898 | Ean: 0721927146663 | UPC: 721927146663
✔️【Design Load】320 Lbs At 600 Rpm; 450 Lbs At 300 Rpm; 650 Lbs At 100 Rpm. Break Strength: 5511 Lbs..
✔️【Quality Service】If You Have Any Issues With The Trolley Assembly 6 Wheels Then Just Let Us Know And We Will Solve It For You Within 24 Hours To Ensure You Are Completely Satisfied..
✔️【Versatility】You Can Use It To Install Ceiling Trolley Systems Or Electric Lifts, Or Use It In Your Diy Projects, Can Use Upside Down..
✔️【Trolleys Size】Steel Plate Hole Diameter-9/16”(14Mm); Thickness-1/4”(6Mm).For Use With 1-5/8" Wide And All 1-5/8" Or Taller Strut Channel..
Features
- Heavy-Duty Build Six Bearing Trolley Assembly Made with Hot-Rolled Carbon Steel of solid steel for impact resistance. Galvanized to ensure rust resistance of wheeled trolleys. Smooth and noiseless during use, bearings and pins are firmly welded, work stably, Resulting In Incredible Strength and Quality!
- Trolleys Size Steel plate hole diameter-9/16 (14mm); thickness-1/4 (6mm).For use with 1-5/8 Wide and All 1-5/8 or Taller Strut Channel.
- Design load 320 lbs at 600 rpm; 450 lbs at 300 rpm; 650 lbs at 100 rpm. Break strength: 5511 lbs.
- Versatility You can use it to install ceiling trolley systems or electric lifts, or use it in your DIY projects, Can use upside down.
- Quality Service If you have any issues with the trolley assembly 6 wheels then just let us know and we will solve it for you within 24 hours to ensure you are completely satisfied.
- See more on Amazon...
Brand: SKTREX | Manufacturer: SKTREX
Weight: 2.58 Pounds
See On Amazon #9
HZG 2 Wheel Trolley Assembly Rollers, Two Bearing Trolley Assembly for 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, Trolley Roller Garage Pulley System Hoist System(4 Sets)
Asin: B0C3M66XZZ | Model: HZG08-4 | PartNumber: HZG08-4
🏃♂️【Design Load】150 Lbs At 600 Rpm; 220 Lbs At 300 Rpm; 280 Lbs At 100 Rpm. Break Strength: 2200 Lbs, Which Can Withstand A Certain Heavy Load..
🏃♂️【Quality Service】If You Have Any Other Questions About The Trolley Assembly , Please Contact Us Via Email. We Will Handle All Your Questions Within 24 Hours..
🏃♂️【Practical Design】The 2-Wheel Trolley Assembly Can Reduce The Difficulty Of Transportation And Is Very Suitable For Installation On Ceiling Trolley Systems Or Electric Lifts, Or For Your Diy Projects..
🏃♂️【Range Of Use】Steel Plate Hole Diameter-9/16”(14Mm); Thickness-1/4”(6Mm).Suitable For 1-5/8" Wide And All 1-5/8" Or Taller Strut Channel..
Features
- Precision Machining Two Bearing Trolley Assembly made with Hot-Rolled carbon steel of solid steel, which is impact resistant. Galvanized to ensure rust resistance of wheeled trolleys. Smooth and noiseless during use, bearings and pins are firmly welded, work stably, Resulting In Incredible Strength and Quality!
- Range of Use Steel plate hole diameter-9/16 (14mm); thickness-1/4 (6mm).suitable for 1-5/8 Wide and All 1-5/8 or Taller Strut Channel.
- Design Load 150 lbs at 600 rpm; 220 lbs at 300 rpm; 280 lbs at 100 rpm. Break strength: 2200 lbs, which can withstand a certain heavy load.
- Practical Design The 2-wheel trolley assembly can reduce the difficulty of transportation and is very suitable for installation on ceiling trolley systems or electric lifts, or for your DIY projects.
- Quality Service If you have any other questions about the trolley assembly , please contact us via email. We will handle all your questions within 24 hours.
- See more on Amazon...
Brand: HZG | Manufacturer: HZG
Dimensions: 1.54 x 6.10 x 4.53 inches | Weight: 1.98 pounds
See On Amazon #10
SKTREX Cable Trolley for Electric Hoist Cable,C Track Rail Festoon Cable Trolley System for Electric Crane and Electric Hoist for Unistrut 1-5/8" Wide and All 1-5/8" or Taller Strut Channel 2 PCS
Asin: B0B9L9W1TJ | Model: RWET | PartNumber: RWET | Ean: 0732404206015 | UPC: 732404206015
✔️【Trolleys Size】Steel Plate Hole Diameter-9/16”(14Mm); Thickness-1/4”(6Mm). Support Plate Width 4 Inches.For Use With 1-5/8" Wide And All 1-5/8" Or Taller Strut Channel..
✔️【Quality Service】If You Have Any Issues With The Cable Trolley Then Just Let Us Know And We Will Solve It For You Within 24 Hours To Ensure You Are Completely Satisfied..
✔️【Note】This Cable Pulley Is Only Available For 1-5/8" Wide And All 1-5/8" Or Taller Strut Channel.
✔️【Heavy-Duty Build】 Cable Trolley Assembly Made With Hot-Rolled Carbon Steel Of Solid Steel For Impact Resistance. Galvanized To Ensure Rust Resistance Of Wheeled Trolleys. Smooth And Noiseless During Use, Bearings And Pins Are Firmly Welded, And Work Stably, Resulting In Incredible Strength And Quality!.
Features
- Cable Trolley It consists of a walking wheel, a bracket, and a supporting plate. The flexible cable is fixed on the supporting plate. The traction frame and the cable pulley are synchronized to achieve the purpose of the cable power trolley.
- Heavy-Duty Build cable Trolley Assembly Made with Hot-Rolled Carbon Steel of solid steel for impact resistance. Galvanized to ensure rust resistance of wheeled trolleys. Smooth and noiseless during use, bearings and pins are firmly welded, and work stably, Resulting In Incredible Strength and Quality!
- Trolleys Size Steel plate hole diameter-9/16 (14mm); thickness-1/4 (6mm). Support plate width 4 inches.For use with 1-5/8 Wide and All 1-5/8 or Taller Strut Channel.
- Note This cable pulley is only available for 1-5/8 Wide and All 1-5/8 or Taller Strut Channel
- Quality Service If you have any issues with the cable Trolley then just let us know and we will solve it for you within 24 hours to ensure you are completely satisfied.
- See more on Amazon...
Brand: SKTREX | Manufacturer: SKTREX
See On Amazon #11
SKTREX 4 Wheel Trolley Assembly M5 Thread Rollers Four Bearing Trolley Assembly for 1-5/8" Wide and All 1-5/8" or Taller Strut Channel (8)
Asin: B0C9TJTL61 | Model: 3 | PartNumber: 3 | Ean: 0766157076120 | UPC: 766157076120
✅Detailed Material: Our Wheel Trolley Is Mainly Made Of Galvanized And Strengthened Solid Steel, Which Can Resist Impact And Corrosion, Prevent Itself From Rusting, It Is Also Sturdy, And Has A Long Service Life.Suitable For Door Installation, Diy Design..
✅Strong Load: Our Hoist Trolley Has Solid Bearing Steel Pin Shaft In The Pillar Channel, Which Can Provide Weight Support Of About 1200 Pounds, And It Is Not Easy To Break, Can Serve You For A Long Time.Our Bearing Strut Trolleys Not Only Be Cost-Efficient But Also Made To Handle Heavy Duty Use Even In The Long Run..
✅Operate Steadily: Wheel Trolley Standard Deep Groove Ball Bearing Installation, Is Very Smooth No Noise To It When Used.Bearing Welding Positioning, To Ensure The Stability Of The Work..
✅Using Simple:There Are3 Mounting Holes On The Underside Of The Wheel Trolley, Which Are Conveniently Positioned To Install Screws Without Interference..
Features
- PARAMETER: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, Bolt mounting hole M5,Each Wheel Trolley comes with 6 M5 bolts
- USING SIMPLE:There are3 mounting holes on the underside of the Wheel Trolley, which are conveniently positioned to install screws without interference.
- DETAILED MATERIAL: our wheel trolley is mainly made of galvanized and strengthened solid steel, which can resist impact and corrosion, prevent itself from rusting, it is also sturdy, and has a long service life.Suitable for door installation, DIY design.
- OPERATE STEADILY: Wheel Trolley Standard deep groove ball bearing installation, is very smooth no noise to it when used.Bearing welding positioning, to ensure the stability of the work.
- STRONG LOAD: our hoist trolley has solid bearing steel pin shaft in the pillar channel, which can provide weight support of about 1200 pounds, and it is not easy to break, can serve you for a long time.Our bearing strut trolleys not only be cost-efficient but also made to handle heavy duty use even in the long run.
- See more on Amazon...
Brand: SKTREX | Manufacturer: SKTREX
See On Amazon #12
6 Wheel Trolley Assembly, Stable Welded Roller Trolley for 1-5/8" Wide and All 1-5/8" or Taller Strut Channel (2)
Asin: B0C5S3P9X3 | Model: TA-58-3W-1 | PartNumber: TA-58-3W-1
For Long Term Use: Each Pack Comes With 2 Beam Trolleys That Offer Just The Right Balance Of Quality, Durability, And Performance. They Offer Low Noise Operation As Well As Being Galvanized To Provide Smooth Opening/Closing Even In The Long Term.
We Have Your Back: If You Have Any Issues With The Trolley Assembly 4 Wheel Then Just Let Us Know And We Will Help You Resolve Them Quickly To Ensure You Are Completely Satisfied. Please Note: It’S Recommended That You Use The Strut Channel Horizontally.
Versatile And Multi-Purpose: Each 6 Wheel Trolley Assembly Offers 690 Lbs Weight Support And Is Suitable For Use With 1-5/8" Wide And All 1-5/8" Or Taller Strut Channel. It Has A Diameter Hole Of 9/16" (14Mm) And 1-1/8" And 1/4" (6Mm) Thickness.
Secure And Stable Performance: The Four Bearing Trolley Assembly Features A Welded Bearing And Pin Shaft To Offer More Stability For Secure Use. It Uses Deep Groove Ball Bearings To Make Sure You Can Operate It Smoothly Without Making Any Noise.
Features
- Heavy Duty Build: Our roller trolley assembly is made using highs strength solid steel that s impact resistant and zinc galvanized to offer protection against rust and corrosion. It features a solid bearing steel pin shaft in the strut channel as well
- Secure And Stable Performance: The four bearing trolley assembly features a welded bearing and pin shaft to offer more stability for secure use. It uses deep groove ball bearings to make sure you can operate it smoothly without making any noise
- For Long Term Use: Each pack comes with 2 beam trolleys that offer just the right balance of quality, durability, and performance. They offer low noise operation as well as being galvanized to provide smooth opening/closing even in the long term
- Versatile And Multi-Purpose: Each 6 wheel trolley assembly offers 690 lbs weight support and is suitable for use with 1-5/8 Wide and All 1-5/8 or Taller Strut Channel. It has a Diameter Hole of 9/16 (14mm) and 1-1/8 and 1/4 (6mm) Thickness
- We Have Your Back: If you have any issues with the trolley assembly 4 wheel then just let us know and we will help you resolve them quickly to ensure you are completely satisfied. Please Note: It s recommended that you use the strut channel horizontally
- See more on Amazon...
Brand: SD FACTORY | Manufacturer: SD FACTORY
Dimensions: 2.67 x 9.17 x 6.07 inches
See On Amazon #13
4.6 Feet Length Strut Channel Trolley Track,1-5/8" 12 Gauge Metal Strut Channel with Slotted Back, Pre-Galvanized Zinc Finish 1
Asin: B0CH11ZKJ8 | Model: LSCT-12041 | PartNumber: LSCT-12041
Wide Range Of Uses: You Can Use Its Channel Brackets For Conduits, Ceiling Grids, Lift Rack And Cable Tray Supports, Hanger Supports Or Above The Ceiling To Mount Electric Hoists, Cranes, Etc..
Quality Assurance: We Guarantee Product Quality And Provide You With After-Sales Service. If You Encounter Any Problems During Use, Please Feel Free To Contact Us, We Will Try Our Best To Solve It For You.
Easy To Use: There Are Many Slot Channels On The Back, So You Can Attach It To Something On The Construction Site That Supports And Frames Light Structural Loads Can Be Easily Installed And Adjusted, Saving Construction Time.
Pre-Galvanized Coating: These Metal Support Channel Surfaces Are Pre-Galvanized To Provide Long-Lasting Corrosion Resistance And Withstand Harsh Conditions.
Features
- Sturdy Frame Support: This track system measures 1-5/8" width and height, post channels for light structural loads on wheel trolley assemblies, pipe and frame construction sites
- PRE-GALVANIZED COATING: These metal support channel surfaces are pre-galvanized to provide long-lasting corrosion resistance and withstand harsh conditions
- Wide range of uses: You can use its channel brackets for conduits, ceiling grids, lift rack and cable tray supports, hanger supports or above the ceiling to mount electric hoists, cranes, etc.
- Easy to use: There are many slot channels on the back, so you can attach it to something on the construction site that supports and frames light structural loads Can be easily installed and adjusted, saving construction time
- Quality Assurance: We guarantee product quality and provide you with after-sales service. If you encounter any problems during use, please feel free to contact us, we will try our best to solve it for you
- See more on Amazon...
Brand: warmfarm | Manufacturer: warmfarm
Dimensions: 1.87 x 352.00 x 1.87 Inches | Weight: 6.40 Pounds
See On Amazon
Looking For Something Else?
Search