01232023 for Holley Terminator X Max Firewall Pass Through- Eliminates Gromet in fire Wall -Bulkhead Wiring Harness
Asin: B0C6SGTQWV | Model: 01232023 Eliminates gromet in fire wall | PartNumber: 01232023 Eliminates gromet in fire wall
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.√【Installation】This Is A Two-Piece Design, The Upper And Lower Halves Are Held Together With The Middle Bolts, And Then The Bracket Is Secured To The Car With The Remaining 4 Bolts. You Can Remove The Top Half Of The Bracket, Which Gives You Enough Room To Install Or Remove The Wiring, Then You Just Bolts It Together And Reinstall The Car Bracket Bolts..
√【Note】:Installation Requires The Base Plate To Be Fixed First, Followed By The Wiring Harness Through The Reassembly Panel.Please Confirm That The Parts Are The Correct Ones You Need Before Purchasing. If You Are Not Sure, Please Contact Us For Verification..
√【Unique Design】The Arc-Shaped Design Of The Wire Harness Holes On The Firewall Pass-Through Bracket Minimizes The Damage Caused By Friction To The Wire Harnesses, Which Will Not Harm The Wire Harnesses Even After Prolonged Use..
√【Material】01232023 The Firewall Pass-Through Bracket Is Made Of Aluminum-Aluminum Alloy Processing, With An Anodized Surface And Precision Polished. The Trial Bracket Is More Durable And Corrosion-Resistant..
Features
- Specification :It offers a 1 1/8" hole and a 3/4" hole. The outside dimensions are 3.78" by 2 1/8".P/N:01232023
- Material 01232023 The firewall pass-through bracket is made of aluminum-aluminum alloy processing, with an anodized surface and precision polished. The trial bracket is more durable and corrosion-resistant.
- Installation This is a two-piece design, the upper and lower halves are held together with the middle bolts, and then the bracket is secured to the car with the remaining 4 bolts. You can remove the top half of the bracket, which gives you enough room to install or remove the wiring, then you just bolts it together and reinstall the car bracket bolts.
- Unique design The arc-shaped design of the wire harness holes on the firewall pass-through bracket minimizes the damage caused by friction to the wire harnesses, which will not harm the wire harnesses even after prolonged use.
- Note :Installation requires the base plate to be fixed first, followed by the wiring harness through the reassembly panel.Please confirm that the parts are the correct ones you need before purchasing. If you are not sure, please contact us for verification.
- See more on Amazon...
Brand: HQPARRTS | Manufacturer: HQPARRTS
Dimensions: 2.36 x 3.90 x 3.14 inches
See On Amazon Similar To 01232023 for Holley Terminator X
#1
Holley 20-37 Carburetor Throttle Stud
Asin: B00029JE2Y | Model: 20-37 | PartNumber: 20-37 | Ean: 0090127036051 | UPC: 090127036051
Brand: Holley | Manufacturer: Holley
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.02 Pounds
Warranty: Warranty
See On Amazon #2
Holley 26-103 Carburetor Throttle Lever Stud Bushing
Asin: B00029JFFU | Model: 26-103 | PartNumber: 26-103 | Ean: 0090127418772 | UPC: 090127418772
Made Of Nylon.
Available For Any Plumbing Situation Or Custom Application.
Allows Insertion Of The Correct Throttle Ball Stud Size For The Cable.
Features
- Genuine Holley Quality Parts
- Allows insertion of the correct throttle ball stud size for the cable
- Made of nylon
- Available for any plumbing situation or custom application
- See more on Amazon...
Brand: Holley | Manufacturer: Holley
Dimensions: 1.25 x 5.00 x 3.50 Inches | Weight: 0.02 pounds
Warranty: Warranty
See On Amazon #3
Holley 26-13 Fuel Bowl Sight Plug & Gasket Kit
Asin: B00029JFGO | Model: 26-13 | PartNumber: 26-13 | Ean: 0090127043875 | UPC: 090127043875
Fits All Holley Carburetors.
Two Brass Sight Plugs.
Two Gaskets.
Brand: Holley | Manufacturer: Holley
Dimensions: 1.10 x 5.00 x 3.50 Inches | Weight: 0.03 pounds
Warranty: Warranty
See On Amazon #4
01232023 Firewall Pass Through for Holley Terminator X Max -Eliminates Gromet in fire Wall- Bulkhead Wiring Harness
Asin: B0CC5527KC | Model: 01232023 | PartNumber: 01232023 | Ean: 0761479913351 | UPC: 761479913351
√ This Will Not Fit Any Car, Fabrication Is Required. You Need To Drill Or Saw Two 1 1/2" Holes At A Spacing Of 1 1/8" Then Connect The Holes Via Saw To Create An Oval (See Last Pic). Then Deburr The Firewall, Center This Bracket In The Hole And Mark The Holes. Then Simply Drill The 1/4" Holes And Install Your Sweet Bracket Via Supplied Bolts And Nuts..
If You Encounter Problems During Use, Please Contact Me Immediately..
√ Tip: If Your Firewall Is Clean Or New Paint Stick The Sticker On A Rag Or Shop Clothes First To Knock Down The Sticking Effect So It Comes Off Clean.
√ This Is A 2 Piece Design, The Upper And Lower Half Bolt Together With The Center Bolts Then The 4 Remaining Bolts Bolt The Bracket To The Car. You Can Remove The Top Half Of The Bracket Which Allows You Plenty Of Room To Install Or Remove Wiring Then You Simply Bolt It Back Together Then Reinstall The Car Mount Bolts..
Features
- This is CNC machined out of 6061 billet aluminum. It offers a 1 1/8" hole and a 3/4" hole. The outside dimensions are 3.78" by 2 1/8". This is raw aluminum with a machined finish. It can be anodized, coated or left as is.
- This is a 2 piece design, the upper and lower half bolt together with the center bolts then the 4 remaining bolts bolt the bracket to the car. You can remove the top half of the bracket which allows you plenty of room to install or remove wiring then you simply bolt it back together then reinstall the car mount bolts.
- This will not fit any car, fabrication is required. You need to drill or saw two 1 1/2 holes at a spacing of 1 1/8 then connect the holes via saw to create an oval (see last pic). Then deburr the firewall, center this bracket in the hole and mark the holes. Then simply drill the 1/4 holes and install your sweet bracket via supplied bolts and nuts.
- TIP: if your firewall is clean or new paint stick the sticker on a rag or shop clothes first to knock down the sticking effect so it comes off clean
- If you encounter problems during use, please contact me immediately.
- See more on Amazon...
Brand: Vanshly | Manufacturer: Vanshly
See On Amazon #5
Holley HOL 0-4412S 0-4412S Model 2300 500 CFM 2-Barrel Manual Choke New Carburetor
Asin: B00029J4FQ | Model: 0-4412S | PartNumber: 0-4412S | Ean: 0090127425718 | UPC: 090127425718
Single Feed Fuel Inlet With Center Hung Float.
Power Valve Blow-Out Protection Adds Trouble Free Operation.
Manual Choke For Easy Control Of Engine Warm Up.
Features
- Fit type: Vehicle Specific
- Manual choke for easy control of engine warm up
- Single feed fuel inlet with center hung float
- Power valve blow-out protection adds trouble free operation
- See more on Amazon...
Brand: Holley | Manufacturer: Holley
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 5.40 pounds
Warranty: Warranty
See On Amazon #6
Holley 121-142 Accelerator Pump Discharge Nozzle
Asin: B00062YU2G | Model: 121-142 | PartNumber: 121-142 | Ean: 0090127020814 | UPC: 090127020814
First Available: 10/13/2005
Brand: Holley | Manufacturer: Holley
Dimensions: 1.20 x 5.00 x 3.45 inches | Weight: 0.02 pounds
Warranty: Warranty
See On Amazon #7
Holley 45-258 Replacement Electric Choke Cap Kit
Asin: B00029JK2S | Model: 45-258 | PartNumber: 45-258 | Ean: 0090127066768 | UPC: 090127066768
Brand: Holley | Manufacturer: Holley
Dimensions: 1.50 x 7.00 x 5.00 inches | Weight: 0.14 pounds
Warranty: Warranty
See On Amazon #8
Holley 121-131 Accelerator Pump Discharge Nozzle
Asin: B00029J5EG | Model: 121-131 | PartNumber: 121-131 | Ean: 0090127020760 | UPC: 090127020760
Brand: Holley | Manufacturer: Holley
Dimensions: 1.20 x 5.00 x 3.45 inches | Weight: 0.01 pounds
Warranty: Warranty
See On Amazon #9
Holley 121-35 Accelerator Pump Discharge Nozzle
Asin: B00029J5GE | Model: 121-35 | PartNumber: 121-35 | Ean: 0090127020999 | UPC: 090127020999
Brand: Holley | Manufacturer: Holley
Dimensions: 1.20 x 5.00 x 3.50 inches | Weight: 0.04 pounds
Warranty: Warranty
See On Amazon #10
Holley EFI 554-120 Terminator 1 bar MAP sensor
Asin: B00EF48C1G | Model: 554-120 | PartNumber: 554-120 | Ean: 0090127685563 | UPC: 090127685563
Brand: Holley EFI | Manufacturer: Holley
Dimensions: 2.70 x 3.85 x 3.55 inches
Warranty: Warranty
See On Amazon #11
Holley EFI 554-121 Terminator Air Temp Sensor
Asin: B00EF48E4Q | Model: 554-121 | PartNumber: 554-121 | Ean: 0090127685570 | UPC: 090127685570
Brand: Holley EFI | Manufacturer: Holley
Dimensions: 2.65 x 3.90 x 3.55 inches | Weight: 0.07 Pounds
Warranty: Warranty
See On Amazon #12
Holley 121-128 Accelerator Pump Discharge Nozzle
Asin: B00029J5E6 | Model: 121-128 | PartNumber: 121-128 | Ean: 0090127020753 | UPC: 090127020753
Brand: Holley | Manufacturer: Holley
Dimensions: 1.20 x 5.00 x 3.50 inches | Weight: 0.04 pounds
Warranty: Warranty
See On Amazon #13
Holley 121-37 Accelerator Pump Discharge Nozzle - Pack of 2
Asin: B00029J5GO | Model: 121-37 | PartNumber: 121-37 | Ean: 0090127021002 | UPC: 090127021002
Straight Style Pump.
Limited Warranty.
Replacement Parts.
Size Of Pump Discharge Nozzle Is 0.037.
Features
- Includes 2 nozzles and 2 gaskets
- Size of pump discharge nozzle is 0.037
- Straight style pump
- Replacement parts
- Limited Warranty
- See more on Amazon...
Brand: Holley | Manufacturer: Holley
Dimensions: 1.25 x 5.00 x 3.50 inches | Weight: 0.04 Pounds
See On Amazon #14
Holley 26-101 Idle Mixture Screw
Asin: B000KMEMJ8 | Model: 26-101 | PartNumber: 26-101 | Ean: 0090127418758 | UPC: 090127418758
Large Head Style.
Brand: Holley | Manufacturer: Holley
Dimensions: 0.40 x 5.00 x 3.45 inches | Weight: 0.02 pounds
Warranty: Warranty
See On Amazon #15
553-201 Holley EFI Terminator X Handheld Controller
Asin: B0BZWLQ8PV | Ean: 0090127356463 | UPC: 090127356463
Basic Tuning Options Allow Simple Adjustments Of Basic Fuel, Fuel Learn, Basic Idle, Spark, And More!.
Advanced Tuning Options Allow Fine Tuning Of Fuel, Closed Loop, Learn, And Idle (Including Iac Parameters And Idle Spark).
System Tuning Options Allow Modifications To Outputs, Engine Setup, Ignition Setup.
Laptop-Free Tuning Changes To Help Optimize Mileage, Driveability And Performance.
Features
- Full Color, Backlit 3.5 Touch Screen LCD
- Laptop-Free Tuning changes to help optimize mileage, driveability and performance
- Basic Tuning options allow simple adjustments of Basic Fuel, Fuel Learn, Basic Idle, Spark, and More!
- System Tuning options allow modifications to Outputs, Engine Setup, Ignition Setup
- Advanced Tuning options allow fine tuning of Fuel, Closed Loop, Learn, and Idle (including IAC parameters and Idle Spark)
- See more on Amazon...
Brand: Holley EFI | Manufacturer: Holley EFI
See On Amazon #16
TERMINATOR X MAX EARLY TRUCK 24X /1X LS MPFI KIT,GM LS 24X CRANK,1X CAM,DRIVE BY WIRE THROTTLE BODY CONTROL,3.5" TOUCHSCREEN,COMPATIBLE WITH 4.8/5.3/6.0 TRUCK ENGINES
Asin: B08461TPYQ
Brand: Southwest Speed
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #17
Holley 121-132 Accelerator Pump Discharge Nozzle
Asin: B00029J5EQ | Model: 121-132 | PartNumber: 121-132 | Ean: 0090127020777 | UPC: 090127020777
Brand: Holley | Manufacturer: Holley
Dimensions: 1.20 x 5.05 x 3.45 inches | Weight: 0.04 pounds
Warranty: Warranty
See On Amazon #18
Holley 26-24 Standard Fitting
Asin: B00029JFGY | Model: 26-24 | PartNumber: 26-24 | Ean: 0090127043998 | UPC: 090127043998
Brand: Holley | Manufacturer: Holley
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.04 pounds
Warranty: Warranty
See On Amazon #19
Holley 121-31 Accelerator Pump Discharge Nozzle - Pack of 2
Asin: B00029J5G4 | Model: 121-31 | PartNumber: 121-31 | Ean: 0090127020982 | UPC: 090127020982
Straight Style Pump.
Limited Warranty.
Replacement Parts.
Size Of Pump Discharge Nozzle Is 0.031.
Features
- Includes 2 nozzles and 2 gaskets
- Size of pump discharge nozzle is 0.031
- Straight style pump
- Replacement parts
- Limited Warranty
- See more on Amazon...
Brand: Holley | Manufacturer: Holley
Dimensions: 1.25 x 5.00 x 3.50 inches | Weight: 0.03 Pounds
See On Amazon
Looking For Something Else?
Search