25 sqft HEATIT Warmmat Electric Radiant Self-Adhesive Floor Heat Heating System & ET-7A Thermostat & Alarm Monitor
Asin: B0C6TBHJCL
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Mat Size: 20" Width, 15.2’Length; Voltage: 120V, Amps: 2.5A, Watts: 300W. Output: 12 Watts/Sqft. The Yellow Heating Element Cannot Be Cut. The Mesh Material Can Be Cut To Make Turns And Angles To Heat Just About Any Shaped Area. A More Detailed Installation Process Is Outlined In The Instructions. With Et-7A Thermostat (𝙣𝙤𝙣-𝙒𝙞𝙁𝙞 𝙫𝙚𝙧𝙨𝙞𝙤𝙣) And Alarm Monitor..
Fully Self-Adhesive Underlay For Ease Of Laying Along With Complete And Comprehensive Installation Instructions For Your Convenience. Used In Conjunction With The Thermostat Controller. Easy Install To Your Shower Room, Kitchen Room, Wet Room, Living Room, Greenhouse And So On. Equipped With Heatit Gfci Thermostat And Installation Monitor..
Easy Installation: Ultra-Thin & Durable Heating Element (Only 1/8" Thick), Pre- Spaced Wire Attached To A Tough Fiberglass Mesh Backing, Cable Cannot Be Cut, But The Matting Can Be, To Allow You To Turn A Corner Or Reverse Direction. The Radiant Floor Heat Cable Is Designed To Provide Even And Consistent Heat, Resulting In Less Energy Consumption..
Ul Listed For Usa And Canada. Fluoropolymer (One Of The Most Heavy Duty Plastic Material) As The Insulation. Can Be Used For Wet Application, But Not For Installation In Pool And Spa Areas, Nor Outdoor Use. 30 Years Limited Warranty For The Heating Mesh. The Limited Warranty Is Valid Based On Correct Installation Methods And Completion Of All Test Requirements..
Features
- HEATIT warm mat was used underneath of many popular flooring material such as ceramic tiles, natural stones, wood, laminate, and so on. One piece 25 sq. ft. mat consists of a heating cable secured with double-sided tape onto a fiber-glass mesh, and No need to calculate spacing dimensions when installing.
- UL LISTED for USA and Canada. Fluoropolymer (One of the most heavy duty plastic material) as the insulation. Can be used for wet application, but not for installation in pool and spa areas, nor outdoor use. 30 years limited warranty for the heating mesh. The limited warranty is valid based on correct installation methods and completion of all test requirements.
- Mat size: 20 width, 15.2 length; Voltage: 120V, Amps: 2.5A, Watts: 300W. Output: 12 Watts/Sqft. The yellow heating element cannot be cut. The mesh material can be cut to make turns and angles to heat just about any shaped area. A more detailed installation process is outlined in the instructions. With ET-7A Thermostat ( - ) and Alarm Monitor.
- Easy Installation: Ultra-thin & durable heating element (Only 1/8 thick), Pre- spaced wire attached to a tough fiberglass mesh backing, Cable cannot be cut, but the matting can be, to allow you to turn a corner or reverse direction. The radiant floor heat cable is designed to provide even and consistent heat, resulting in less energy consumption.
- Fully self-adhesive underlay for ease of laying along with complete and comprehensive installation instructions for your convenience. used in conjunction with the thermostat controller. Easy install to your shower room, kitchen room, wet room, living room, greenhouse and so on. Equipped with HEATIT GFCI Thermostat and Installation Monitor.
- See more on Amazon...
Brand: HEATIT | Manufacturer: Zhukeshi
See On Amazon Similar To 25 sqft HEATIT Warmmat Electric
#1
4 PCS Film Heater Plate Adhesive Pad, Icstation PI Heating Elements Film 24V 30W Strip Heater Adhesive Polyimide Heater Plate 45mmx100mm
Asin: B074SXKPZL | Model: 24V 30W Flexible Polyimide Heater Plate | PartNumber: 24V 30W Flexible Polyimide Heater Plate
【Safe To Use】Polyimide Film Has Excellent Dielectric Strength, Excellent Resistance To Electric Intensity, Perfect Heat Transfer Efficiency, And Great Resistance Stability. Safe To Use With Stable Performance..
【24V Polyimide Heater Film】 Heating Films Can Not Control The Temperature Itself. You Can Use It With A Temperature Controller. Working Voltage: Dc 24V, Power: 30W, Maximum Temperature: About 170℃..
【Durable】Equipped With Self-Adhesive Can Be Fixed On The Item Surface Easily.They Are Formated Through High Temperature High-Pressure And Heat-Sealing Process..
【Extremely Thin】Lightweight, And Flexible Polyimide Heaters Can Quickly Provide Heat To Where It Is Needed. Widely Used In Electronics Manufacturing, Medical Devices, Scientific Instruments..
Features
- Fast Preheating Speed Uses polyimide as an insulator outside, and the thermo foil as an electric heating element inside. During normal operation once the interior is within operating temps, the temperature is very stable.
- Extremely Thin Lightweight, and flexible polyimide heaters can quickly provide heat to where it is needed. Widely used in electronics manufacturing, medical devices, scientific instruments.
- Safe to Use Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability. Safe to use with stable performance.
- Durable Equipped with self-adhesive can be fixed on the item surface easily.They are formated through high temperature high-pressure and heat-sealing process.
- 24V Polyimide Heater Film Heating films can not control the temperature itself. You can use it with a temperature controller. Working Voltage: DC 24V, Power: 30W, Maximum Temperature: about 170 .
- See more on Amazon...
Brand: IS | Manufacturer: Icstation
See On Amazon #2
Antrader 12pcs Black Aluminum Cooler Radiator Heat Sink Heatsink 25 x 25 x 10mm
Asin: B07CVT7P25 | Model: 8541602236 | PartNumber: 8541602236
Widely Use For Computer Pc Chipset, Power Ic, Power Electric Device, Led Light Devices, Etc..
Please Check The Specification Table And Make Sure That The Size Of The Heatsink Fits That Of Your Component..
Use Heatsink Adhesive Glue To Install Heatsink . Glue Is Not Included Here..
Overall Size : 25 X 25 X 10Mm/ 1" X 1" X 0.4" (L*W*H).
Features
- Aluminum heatsink cooling, Strong heat conductivity and heat dissipation.
- Overall Size : 25 x 25 x 10mm/ 1 x 1 x 0.4 (L*W*H)
- Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.
- Use heatsink adhesive glue to install heatsink . Glue is not included here.
- Please check the specification table and make sure that the size of the heatsink fits that of your component.
- See more on Amazon...
Brand: Antrader | Manufacturer: Guangzhou Openfind Electronic Commerce CO., LTD
Dimensions: 0.40 x 1.00 x 1.00 inches | Weight: 0.15 pounds
See On Amazon #3
Frost King HC24A Automatic Electric Heat Kit Heating Cables, 24 Feet, Black, Ft
Asin: B000BPG5XA | Model: HC24A | PartNumber: HC24A | Ean: 0077578015705, 0372426786418 | UPC: 372426786418, 077578015705
For Metal And Plastic Water Pipes.
Easy To Install.
Keeps Water Flowing Down To (-40) Degrees F.
Features
- Size: 24 Feet.24Ft x 120V x 7W/ft.
- Keeps water flowing down to (-40) degrees F
- For metal and plastic water pipes
- Easy to install
- See more on Amazon...
Brand: Frost King | Manufacturer: Thermwell Products Co., Inc
Dimensions: 1.25 x 10.50 x 9.25 Inches | Weight: 1.30 Pounds
See On Amazon #4
Easycargo 10pcs 25mm Heatsink Kit 25x25x10mm + 3M 8810 Thermal Conductive Adhesive Tape, Cooler Aluminum Heat Sinks for Cooling Raspberry Pi 4 GPU IC Chips LED (25mmx25mmx10mm)
Asin: B07D4F1F8R | Model: 252510B10-8810 | PartNumber: 252510B10-8810 | Ean: 6091022466138
Can Be Applied For Passive Cooling Of Raspberry Pi, Led, Fpv Transmitter, Ic Chips.
Weight: 0.4 Oz / 12 Gr Per Pc.
Dimension: 0.98 X 0.98 X 0.39 Inch / 25Mm X 25Mm X 10Mm (L*W*H).
Pre-Applied Thermal Conductive Adhesive Tape Backing.
Features
- Includes 10pcs 25mm black anodized aluminum heatsink
- Pre-applied thermal conductive adhesive tape backing
- Can be applied for passive cooling of Raspberry Pi, LED, FPV transmitter, IC Chips
- Dimension: 0.98 x 0.98 x 0.39 inch / 25mm x 25mm x 10mm (L*W*H)
- Weight: 0.4 oz / 12 gr per pc
- See more on Amazon...
Brand: Easycargo | Manufacturer: Easycargo
Dimensions: 0.39 x 0.98 x 0.98 inches | Weight: 0.12 Pounds
See On Amazon #5
10 PCS 10mmx93mm Film Heater Plate Adhesive Pad, PI Heating Elements Film 12V 12W Strip Heater Adhesive Polyimide Heater Plate
Asin: B0CDL81T1T | Ean: 0687117729750 | UPC: 687117729750
Equipped With Self-Adhesive Can Be Fixed On The Item Surface Easily.They Are Formated Through High Temperature High-Pressure And Heat-Sealing Process..
Notice: Heating Films Can Not Control The Temperature Itself. You Can Use It With A Temperature Controller..
It Is Preheating Speed ， Long Using Life And Space Saving ；Polyimide Heater Film Polyimide Heater Film, Which Adopts Polyimide As Outer Insulator And The Thermos Foil As Inner Electric Heating Element, Is Formed By High Temperature And High Pressure Heat Sealing Process..
Excellent Dielectric Strength, Thermal Conductivity Efficiency And Resistance Stability.
Features
- Working Voltage: DC 12V, Power: 12W,Maximum Temperature: about 150 .
- Excellent dielectric strength, thermal conductivity efficiency and resistance stability
- Equipped with self-adhesive can be fixed on the item surface easily.They are formated through high temperature high-pressure and heat-sealing process.
- it is Preheating Speed Long Using Life and Space Saving Polyimide heater film Polyimide heater film, which adopts polyimide as outer insulator and the thermos foil as inner electric heating element, is formed by high temperature and high pressure heat sealing process.
- Notice: Heating films can not control the temperature itself. You can use it with a temperature controller.
- See more on Amazon...
Brand: DWEII | Manufacturer: DWEII
See On Amazon #6
HEATIT JHSF 24ft Heating Cable for Metal And Plastic Home Supply Pipes, Keeps Water Flowing at -40 F, Self-Regulating Pipe Heat Cable for Pipe Freeze Protection, Energy-Saving, ETL Listed, 120V
Asin: B0732YC3G1 | Model: 24 ft | PartNumber: 24 ft | Ean: 6947881534511
[Etl Certified Safety] Our Self-Regulating Heating Cable Is Etl Certified, Ensuring Top-Notch Quality And Safety. This Certification Confirms That Our Water Line Heat Tape Meets Rigorous Industry Standards For Performance And Safety. Rest Assured In The Reliability Of Our Pipe Heat Cables, Providing Exceptional Freeze Protection For Your Water Pipes. Don't Settle For Less—Choose A Product That Excels In Both Quality And Safety..
[Efficient Integrated Thermostat] Our Pipe Heat Trace Features A Built-In Thermostat, Activating At 38℉(3℃) And Deactivating At 50℉(10℃). This Intelligent System Regulates Power Output, Operating Only When Needed For Optimal Energy Efficiency. Rest Assured, Your Water Pipes Are Protected From Freezing While Minimizing Energy Usage..
[Easy Installation And Versatile Length Range] Our Pipe Heat Tape Is Designed For Easy Installation, With Pre-Installed Features For User Convenience. Whether Straight, Spiral, Or Overlap, It Adapts Effortlessly To Your Needs. Available In Lengths From 3Ft To 160Ft, It Offers Versatile Options For Various Applications, From Residential To Industrial..
[High-Tech Self-Regulating Heating Technology] Our Water Pipe Heat Tape Features Self-Regulating Technology, Automatically Adjusting Heating Power In Response To Ambient Conditions, Ensuring It Never Overheats Or Causes Burns. This Intelligent Functionality Optimizes Energy Usage, Ensuring Efficient And Dependable Pipe Freeze Protection..
[Compatible With Different Pipe Materials] Our Water Pipe Heat Cable Is Versatile, Suitable For Various Pipe Types. It Works Effectively With Both Metal And Plastic Water Pipes, Delivering Reliable Freeze Protection Across Different Materials. Whether It's Copper, Pvc, Or Stainless Steel, Our Cable Guarantees Exceptional Performance, Ensuring Your Pipes Remain Secure And Operational Even In Extreme Weather Conditions..
Features
- [Pipe Freeze Protection] Pipe Heating Cable, 3 W/ft, energy-efficient design. Safeguard your pipes and reduce electricity costs. Maintains water flow in temperatures as low as -40 F (-40 C). Includes a 2 Ft power cord and heating cable options ranging from 3 Ft to 160 Ft.
- [Compatible with Different Pipe Materials] Our water pipe heat cable is versatile, suitable for various pipe types. It works effectively with both metal and plastic water pipes, delivering reliable freeze protection across different materials. Whether it's copper, PVC, or stainless steel, our cable guarantees exceptional performance, ensuring your pipes remain secure and operational even in extreme weather conditions.
- [ETL Certified Safety] Our Self-Regulating Heating Cable is ETL certified, ensuring top-notch quality and safety. This certification confirms that our water line heat tape meets rigorous industry standards for performance and safety. Rest assured in the reliability of our pipe heat cables, providing exceptional freeze protection for your water pipes. Don't settle for less choose a product that excels in both quality and safety.
- [High-Tech Self-regulating Heating Technology] Our water pipe heat tape features self-regulating technology, automatically adjusting heating power in response to ambient conditions, ensuring it never overheats or causes burns. This intelligent functionality optimizes energy usage, ensuring efficient and dependable pipe freeze protection.
- [Efficient Integrated Thermostat] Our pipe heat trace features a built-in thermostat, activating at 38 (3 ) and deactivating at 50 (10 ). This intelligent system regulates power output, operating only when needed for optimal energy efficiency. Rest assured, your water pipes are protected from freezing while minimizing energy usage.
- [Easy Installation and Versatile Length Range] Our pipe heat tape is designed for easy installation, with pre-installed features for user convenience. Whether straight, spiral, or overlap, it adapts effortlessly to your needs. Available in lengths from 3ft to 160ft, it offers versatile options for various applications, from residential to industrial.
- See more on Amazon...
Brand: HEATIT | Manufacturer: Zhukeshi
Dimensions: 3.00 x 21.00 x 4.00 inches | Weight: 1.11 Pounds
See On Amazon #7
10 PCS 25mmx50mm Film Heater Plate Adhesive Pad, PI Heating Elements Film 12V 7W Strip Heater Adhesive Polyimide Heater Plate
Asin: B0CDLBDV5N | Ean: 0687117729767 | UPC: 687117729767
Equipped With Self-Adhesive Can Be Fixed On The Item Surface Easily.They Are Formated Through High Temperature High-Pressure And Heat-Sealing Process..
Notice: Heating Films Can Not Control The Temperature Itself. You Can Use It With A Temperature Controller..
It Is Preheating Speed ， Long Using Life And Space Saving ；Polyimide Heater Film Polyimide Heater Film, Which Adopts Polyimide As Outer Insulator And The Thermos Foil As Inner Electric Heating Element, Is Formed By High Temperature And High Pressure Heat Sealing Process..
Excellent Dielectric Strength, Thermal Conductivity Efficiency And Resistance Stability.
Features
- Working Voltage: DC 12V, Power: 7W, Maximum Temperature: about 100 .
- Excellent dielectric strength, thermal conductivity efficiency and resistance stability
- Equipped with self-adhesive can be fixed on the item surface easily.They are formated through high temperature high-pressure and heat-sealing process.
- it is Preheating Speed Long Using Life and Space Saving Polyimide heater film Polyimide heater film, which adopts polyimide as outer insulator and the thermos foil as inner electric heating element, is formed by high temperature and high pressure heat sealing process.
- Notice: Heating films can not control the temperature itself. You can use it with a temperature controller.
- See more on Amazon...
Brand: DWEII | Manufacturer: DWEII
See On Amazon #8
EasyHeat 2102 Freeze Free Heating Cable - 100'
Asin: B002KT5ZPO | Model: 2102 | PartNumber: 2102 | Ean: 0013627068957, 8380674304256 | UPC: 013627068957
Reduces Power Consumption When The Pipe Does Not Require Freeze Protection.
Length: 100' And Rugged Metal Braided Jacket Provides An Electrical Ground As Well As Protection Against Damage.
Ideal For Use On Residential Metal Or Plastic Water Supply And Drain Pipes Subject To Freezing Temperatures.
Provides Flexible Protection Against Pipe Freeze-Ups In Even The Most Challenging Applications.
Features
- Self-regulating pipe heating system
- Provides flexible protection against pipe freeze-ups in even the most challenging applications
- Reduces power consumption when the pipe does not require freeze protection
- Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
- Length: 100' and rugged metal braided jacket provides an electrical ground as well as protection against damage
- See more on Amazon...
First Available: 09/20/2023
Brand: Easy Heat | Manufacturer: Thermwell Products Co., Inc
Dimensions: 2.80 x 8.90 x 8.60 Inches | Weight: 4.00 pounds
Warranty: Warranty
See On Amazon #9
DGZZI 10PCS Black Aluminum Heatsink 25x25x10mm Square CPU Heat Sinks Cooling Cooler Fin with 10PCS 3M Silicone Based Thermal Pad
Asin: B07XQ6D2MG | Model: HSINK-AB25X10-10 | PartNumber: HSINK-AB25X10-10 | Ean: 0713838215798 | UPC: 713838215798
Designed To Maximise Its Surface Area In Contact With The Cooling Air..
Size : 25X25x10mm /0.98X0.98X0.39Inch.Color : Black.Package Include : 10Pcs..
Used For Ic, Diode, Dynatron, Electronic, Led, Ram, Chip Computer's Component Heat Dissipation, Or Anywhere You Need A Efficient Heatsink..
Reduce The Risk Of Hardware Failure Due To Overheating..
Features
- Made of high quality aluminum, fast heat conduction, good heat dissipation effect, long service life.
- Reduce the risk of hardware failure due to overheating.
- Designed to maximise its surface area in contact with the cooling air.
- Used for IC, Diode, Dynatron, Electronic, LED, RAM, CHIP computer's component heat dissipation, or anywhere you need a efficient heatsink.
- Size : 25x25x10mm /0.98x0.98x0.39Inch.Color : Black.Package Include : 10PCS.
- See more on Amazon...
Brand: DGZZI | Manufacturer: DGZZI
Dimensions: 0.39 x 0.98 x 0.98 inches
See On Amazon #10
MAXKOSKO 24Ft. 120V Heat Trace Cable for Pipe Freeze Protection, Self-Regulating Heating Cable for Metal And Plastic Home Pipes, Energy-Saving Pipe Heating Cable Keeps Water Flowing at -40 F.
Asin: B0B34PNLLQ | Model: heat cable | PartNumber: heat cable
Energy Saving: Self-Regulating Heat Cable Has A Built-In Thermostat That Automatically Turns On At 38°F, Heat Trace Cable Heats Only When Necessary. Pipe Wrap Tape Has A 3Ft Power Cord Which Means That The Distance Between The Thermostat And The Plug Is 3 Feet..
For Both Plastic And Metal Pipes: The Heat Trace For Pipes Protects Commercial And Residential Plastic Or Metal Water Supply Pipes From Freezing In Cold Winter (Including Rv, Inlet Pipe, Drain Pipe, Sewer, Palm Tree Frost Protection, Etc). And This Pipe Heating Tape Can Freeze-Protect Pipes Of Up To 2In Diameter. Pipe Heating Cable Is Not Perishable And Will Not Expire..
Easy Installation: This Water Pipe Heat Cable Is Pre-Assembled And Ready To Install. You Can Easily Diy This Heat Tape For Pipes By Yourself By Following The 4-Steps Instruction.(If You Want To Test Before Installation, Please Test At A Temperature Under 0°C (32°F).Plug In The Heating Cable. Normally You Can Feel The Slight Warmth On The Cable In A Few Minutes.).
High Tech Self-Regulating Heating Technology: The Pipe Heating Cable Smartly Adjust Its Power Output And Never Overheat Or Burn. Water Pipe Heat Tape Can Be Installed With Straight-Traced, Spiraled, Or Overlapped..
Features
- PIPE FREEZE PROTECTION: Pipe Heating Cable ,5 W/ft, heats up rapidly.This pipe heater can keep water flowing at ambient temperatures down to -40 F (-40 C). It consists of an additional 3 Ft power cord Plus a heating cable varies from 3 Ft to 160Ft long. Such as 24Ft, refers to the length of the heating cable itself. The power cord length is additional and not included in this measurement.
- HIGH TECH SELF-REGULATING HEATING TECHNOLOGY: The pipe heating cable smartly adjust its power output and never overheat or Burn. Water pipe heat tape can be installed with Straight-traced, Spiraled, or Overlapped.
- ENERGY SAVING: Self-regulating heat cable has a built-in thermostat that automatically turns on at 38 F, heat trace cable heats only when necessary. Pipe wrap tape has a 3ft power cord which means that the distance between the thermostat and the plug is 3 feet.
- EASY INSTALLATION: This water pipe heat cable is pre-assembled and ready to Install. You can easily DIY this heat tape for pipes by yourself by following the 4-steps instruction.(If you want to test before installation, please test at a temperature under 0 C (32 F).Plug in the heating cable. Normally you can feel the slight warmth on the cable in a few minutes.)
- FOR BOTH PLASTIC AND METAL PIPES: The heat trace for pipes protects commercial and residential plastic or metal water supply pipes from freezing in cold winter (Including RV, inlet pipe, drain pipe, sewer, palm tree frost protection, etc). And this pipe heating tape can freeze-protect pipes of up to 2in diameter. Pipe heating cable is not perishable and will not expire.
- See more on Amazon...
Brand: MAXKOSKO | Manufacturer: MAXKOSKO
Dimensions: 2.60 x 9.80 x 9.80 inches
See On Amazon #11
Pipe Heat Cable for Water Pipe Freeze Protection, Self-Regulating Heat Tape for Metal and Plastic Pipes, Anti-Freeze Pipe Heating Trace System with 6Ft. Power Cord, 120V,25 Feet
Asin: B0CBMM5H9X | Model: 25-Feet | PartNumber: 25-Feet | Ean: 0654370917033 | UPC: 654370917033
Easy To Install：Heat Cable For Pipes Is Highly Flexible, Allowing It To Conform Tightly To Metal And Plastic Pipes. Simply Spiral, Overlap, Or Install Heat Tape For Water Pipes In A Straight Line And Secure It With Cable Ties Or Heat Tape Straps. No Special Tools Are Required. For Your Convenience, Water Line Heat Tape Comes With Aluminum Fiberglass Tape For Simple Diy Installation..
Fast Acting And Energy Efficient :Pipe Heating Cable Provides An Initial Power Output Of 6W/Ft But Can Increase Up To 10W/Ft As Temperatures Drop, Then Reduce Again When Heating Demand Lessens.No More Worrying About Frozen Pipes!.
Suitable For Various Home Pipe Heating: Pipe Wrap Heat Tape Is Specifically Designed For Installation Along Various Pipe Materials, Including Plastic, Abs,Copper, Steel, Cast Iron And Other Metal Pipes. It Provide Safe And Efficient Heating For Pipe Freeze Protection In Cold Winter. Plus, This Pipe Heating Tape Can Effectively Safeguard Pipes Of Up To 2 Inches In Diameter..
Pipe Freeze Protection: Pipe Heating Cable ,6 W/Ft, Heats Up Rapidly.This Heat Tape For Water Pipes Can Keep Water Flowing At Ambient Temperatures Down To -40°F (-40°C). Pipe Heat Tape Consists Of An Additional 6 Ft Power Cord Plus A Heating Cable Varies From 4 Feet To 155 Feet Long. Such As 85Ft, Refers To The Length Of The Heating Cable Itself. The Power Cord Length Is Additional And Not Included In This Measurement..
Features
- Self-regulating Technology Heat trace for pipes can automatically adjust its power output based on the ambient temperature around the pipes. You can trust that our plumbing heat trace will never overheat or cause any burns.
- PIPE FREEZE PROTECTION: Pipe Heating Cable ,6 W/ft, heats up rapidly.This heat tape for water pipes can keep water flowing at ambient temperatures down to -40 F (-40 C). Pipe heat tape consists of an additional 6 Ft power cord plus a heating cable varies from 4 Feet to 155 Feet long. Such as 85Ft, refers to the length of the heating cable itself. The power cord length is additional and not included in this measurement.
- Easy to install Heat cable for pipes is highly flexible, allowing it to conform tightly to metal and plastic pipes. Simply spiral, overlap, or install heat tape for water pipes in a straight line and secure it with cable ties or heat tape straps. No special tools are required. For your convenience, Water line heat tape comes with Aluminum fiberglass tape for simple DIY installation.
- Suitable For Various Home Pipe Heating: Pipe wrap heat tape is specifically designed for installation along various pipe materials, including plastic, ABS,copper, steel, cast iron and other metal pipes. It provide safe and efficient heating for pipe freeze protection in cold winter. Plus, this pipe heating tape can effectively safeguard pipes of up to 2 inches in diameter.
- Fast Acting and Energy Efficient :Pipe Heating Cable provides an initial power output of 6W/ft but can increase up to 10W/ft as temperatures drop, then reduce again when heating demand lessens.No more worrying about frozen pipes!
- See more on Amazon...
Brand: YeloDeer | Manufacturer: YeloDeer
See On Amazon #12
Cupohus Heat Tape for Water Pipes with Thermostat 25FT, Freeze Protection Self-Regulating Heat Trace Cable for Metal, Plastic Home Pipes, Roof and RV
Asin: B0CC1B69J4 | Model: 25FT | PartNumber: 25FT
🔥【Safety Guaranteed】🔥 Operation With 120V And An External Ground Fault Circuit Interrupter (Cfci) Power Outlet Prevents Overheating Problems Due To Short Circuits, And Built-In Wires Are Completely Wrapped To Avoid Our Pipe Heat Cables Malfunction Due To Water Seepage;.
🔥【Easy Installation】🔥All You Need To Do Is Lay Our Heating Tape Straight Or Wrap It Around The Water Pipe And Secure It With The Supplied Fiberglass Tape; And If You Want To Test It, Please Put The Thermostat In Ice Water, Plug It In, Wait For A Few Minutes You Can Feel The Cable Heating Up;.
🔥【Easy Installation】🔥 All You Need To Do Is Lay Our Heating Tape Straight Or Wrap It Around The Water Pipe And Secure It With The Supplied Fiberglass Tape; And If You Want To Test It, Please Put The Thermostat In Ice Water, Plug It In, Wait For A Few Minutes You Can Feel The Cable Heating Up;.
🔥【Intelligent Energy-Saving】🔥 When Our Pipe Heating Cable Detects That The Water Temperature Is Below 41°F (5°C) , The Heating System Starts To Work And Stops When The Water Temperature Reaches 59℉ (15°C), So That You Can Avoid High Electricity Bills Due To Long Continuous Heating;.
Features
- Plumbing Protection Our pipe heating cable uses electricity to heat the entire length of the hose in order to keep the hose above the 59 (15 C) so that at -40 F (-40 C) in winter night, the water will flow smoothly through your hose as well, due to ordinary water hose may freeze water due to low temperature;
- Intelligent Energy-Saving When our pipe heating cable detects that the water temperature is below 41 F (5 C) , the heating system starts to work and stops when the water temperature reaches 59 (15 C), so that you can avoid high electricity bills due to long continuous heating;
- Safety Guaranteed Operation with 120V and an external ground fault circuit interrupter (CFCI) power outlet prevents overheating problems due to short circuits, and built-in wires are completely wrapped to avoid our pipe heat cables malfunction due to water seepage;
- Easy Installation All you need to do is lay our heating tape straight or wrap it around the water pipe and secure it with the supplied fiberglass tape; and if you want to test it, please put the thermostat in ice water, plug it in, wait for a few minutes you can feel the cable heating up;
- Easy Installation All you need to do is lay our heating tape straight or wrap it around the water pipe and secure it with the supplied fiberglass tape; and if you want to test it, please put the thermostat in ice water, plug it in, wait for a few minutes you can feel the cable heating up;
- See more on Amazon...
Brand: Cupohus | Manufacturer: Cupohus
See On Amazon #13
HEATIT Pipe Heat Cables for Freeze Protection - Efficient Heat Trace Cable for Pipes, CSA & ETL Approved, Versatile Application, Reliable Pipe Heater, Energy-Saving HISD 30ft, 7w/ft, 120V
Asin: B01GZJJAQO | Model: 30ft | PartNumber: 30ft | Ean: 6947881527452, 6947881580150, 6947881553000
Pre-Assembled Easy To Install. Including Grounded Plug With Light, Built In Thermostat, And Instructions. Easy To Install And Use. 120 Volt, 7 Watts/Ft. Built In Thermostat To Turn The Cable 37F On 50F Off. Energy Saving. 100% Screen Rate With The Aluminum Foil And Tinned Copper Braid. Industrial Grade Heat Shrinkage Tube For Connection. Tough Xlpe As Inner Insulation And Weather Resistant Pvc (High-Low Temperature) As Out Jacket..
Testing The Cable Before The Installation. Uncoil The Cable, Plug In The Heat Tape For Water Pipes And Then Put The Thermostat Part Of The Cable Into An Ice Bucket For Few Minutes. When The Temperature Is Below 37F, The Thermostat Will Energize The Cable To Work. Normally You Can Feel The Slight Warm On The Heating Cable In Few Minutes. To Avoid The Overheat, Please Don't Plug In The Cable For A Long Time For Testing. When You Feel The Slight Warm, Please Turn It Off..
Maximum 1/2 In Fiberglass Insulation Was Used Over The Heating Cable For Lower Temperature Protection. Pipes Must Be At Least 3 Feet And At Least 3/8'' And Less Than 1 1/2'' In. Diameter. No Crossing. No Spiral. No Overlap Itself. Only Straight..
𝙐𝙨𝙚 𝙛𝙤𝙧 𝙬𝙖𝙩𝙚𝙧 𝙛𝙞𝙡𝙡𝙚𝙙 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 (𝙞𝙣𝙘𝙡𝙪𝙙𝙞𝙣𝙜 𝙋𝙀𝙓) 𝙤𝙧 𝙢𝙚𝙩𝙖𝙡 𝙥𝙞𝙥𝙚𝙨. 𝙉𝙤𝙩 𝙪𝙨𝙚 𝙛𝙤𝙧 𝙖𝙣𝙮𝙩𝙝𝙞𝙣𝙜 𝙚𝙡𝙨𝙚, 𝙡𝙞𝙠𝙚 𝙚𝙢𝙥𝙩𝙮 𝙬𝙖𝙩𝙚𝙧 𝙥𝙞𝙥𝙚𝙨, 𝙛𝙪𝙚𝙡 𝙡𝙞𝙣𝙚𝙨, 𝙝𝙤𝙨𝙚𝙨, 𝙜𝙪𝙩𝙩𝙚𝙧𝙨, 𝙨𝙩𝙚𝙖𝙢 𝙡𝙞𝙣𝙚𝙨 𝙖𝙣𝙙 𝙨𝙤 𝙤𝙣. Two-Year Limited Quality . If You Are Not Completely Satisfied With Heatit Heating Cable, Please Don't Hesitate To Contact Our Customer Service At Any Time, We'll Try Our Best To Solve Your Issues..
Features
- Choose safety first with our CSA and ETL certified constant wattage pipe heating cable. These certifications guarantee top-notch safety standards. Protect your pipes and equipment from overheating and short circuits while reducing fire risks. Count on us for high-quality, certified solutions. Buy now for peace of mind.
- ( ) . , , , , , . Two-year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service at any time, we'll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heat tape for water pipes and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
- See more on Amazon...
Brand: HEATIT | Manufacturer: Zhukeshi
Weight: 1.06 Pounds
See On Amazon #14
DEWENWILS 30FT Heat Cable for Pipe Freeze Protection, Snow De-Icing Cable with Build in Thermostat, CSA/ETL Listed
Asin: B09ZTM7KDP | Model: HPHC | PartNumber: HPHC
Build-In Thermostat - You Just Tape The Thermostat In Place Against The Pipe, The Cable Is Able To Monitor The Temp Of Your Pipes, It Will Work When The Temperature Of The Pipe Below 37°F And Turn Off When Above 50°F, Saving Energy And Electricity For You, The Thermostat Is 1.75 Away From The Plug.
Reliable For Heating Pipes - Etl And Csa Cerfied, Illuminated Plug Lets You See If The Heat Cable Is Working From A Distance, Please Test The Cable Before The Installation, 1 Year Warranty Provided.
Heavy Duty Cable - 2Ft Cold Lead And 30Ft Heat Cable Is Commercial Grade For Long-Time And Heavy-Duty Usages, Pvc Out Jacket, 21W Total Wattage For Heating Pipes.
Easy To Install - Pre-Assembled For Quick Installation, The Heat Cable Can Be Straight-Traced Or Spiral On The Pipe, Be Aware That The Lowest Installation Temperature Is 14°F And The Maximum Exposure Temperature Is 221°F.
Features
- QUALITY HEAT CABLE - Keeping your pipes/water lines from freezing during the winter, functioning perfectly for all kinds of plastic and metal pipes (including copper, galvanized, ABS plastic, PVC plastic pipes, etc), not suitable for gutters, hoses
- EASY TO INSTALL - Pre-assembled for quick installation, the heat cable can be straight-traced or spiral on the pipe, be aware that the lowest installation temperature is 14 F and the maximum exposure temperature is 221 F
- BUILD-IN THERMOSTAT - you just tape the thermostat in place against the pipe, the cable is able to monitor the temp of your pipes, it will work when the temperature of the pipe below 37 F and turn off when above 50 F, saving energy and electricity for you, the thermostat is 1.75 away from the plug
- HEAVY DUTY CABLE - 2FT cold lead and 30FT heat cable is commercial grade for long-time and heavy-duty usages, PVC out jacket, 21W total wattage for heating pipes
- RELIABLE FOR HEATING PIPES - ETL and CSA cerfied, illuminated plug lets you see if the heat cable is working from a distance, please test the cable before the installation, 1 Year warranty provided
- See more on Amazon...
Brand: DEWENWILS | Manufacturer: DEWENWILS
Dimensions: 1.18 x 7.09 x 7.09 inches
See On Amazon #15
Easycargo 6pcs 25mm Heatsink Kit 25x25x20mm + 3M 8810 Thermal Conductive Adhesive Tape, Cooler Aluminum Heat Sink for Cooling Raspberry Pi 4 GPU IC Chips LED (25mmx25mmx20mm)
Asin: B0CTCHPNPL | Model: 252520B06-8810 | PartNumber: 252520B06-8810 | Ean: 6091022470166
Can Be Applied For Passive Cooling Of Raspberry Pi, Led, Fpv Transmitter, Ic Chips.
Weight: 0.53 Oz / 15 Gr Per Pc.
Dimension: 0.98 X 0.98 X 0.39 Inch / 25Mm X 25Mm X 10Mm (L*W*H).
Pre-Applied Thermal Conductive Adhesive Tape Backing.
Features
- Includes 6pcs 25mm black anodized aluminum heatsink
- Pre-applied thermal conductive adhesive tape backing
- Can be applied for passive cooling of Raspberry Pi, LED, FPV transmitter, IC Chips
- Dimension: 0.98 x 0.98 x 0.39 inch / 25mm x 25mm x 10mm (L*W*H)
- Weight: 0.53 oz / 15 gr per pc
- See more on Amazon...
Brand: Easycargo | Manufacturer: Easycargo
Dimensions: 0.80 x 1.00 x 1.00 inches | Weight: 0.03 Pounds
See On Amazon #16
ACEIRMC 12pcs 25mmx50mm Film Heater Plate Adhesive Pad, PI Heating Elements Film 12V 7W Strip Heater Adhesive Polyimide Heater Plate (12V 7W 25mmx50mm)
Asin: B0CHHXCYDG | Ean: 0687117730473 | UPC: 687117730473
Polyimide Film Has Excellent Dielectric Strength, Excellent Resistance To Electric Intensity, Perfect Heat Transfer Efficiency, And Great Resistance Stability. Safe To Use With Stable Performance..
Heating Films Can Not Control The Temperature Itself. You Can Use It With A Temperature Controller. Working Voltage: Dc 12V, Power: 7W, Maximum Temperature: About 100℃..
Equipped With Self-Adhesive Can Be Fixed On The Item Surface Easily.They Are Formated Through High Temperature High-Pressure And Heat-Sealing Process..
Lightweight, And Flexible Polyimide Heaters Can Quickly Provide Heat To Where It Is Needed. Widely Used In Electronics Manufacturing, Scientific Instruments..
Features
- Uses polyimide as an insulator outside, and the thermo foil as an electric heating element inside. During normal operation once the interior is within operating temps, the temperature is very stable.
- Lightweight, and flexible polyimide heaters can quickly provide heat to where it is needed. Widely used in electronics manufacturing, scientific instruments.
- Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability. Safe to use with stable performance.
- Equipped with self-adhesive can be fixed on the item surface easily.They are formated through high temperature high-pressure and heat-sealing process.
- Heating films can not control the temperature itself. You can use it with a temperature controller. Working Voltage: DC 12V, Power: 7W, Maximum Temperature: about 100 .
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
See On Amazon #17
Harissess 2PCS Film Heater Plate Adhesive Pad,12V 25W PI Heating Elements Film Polyimide Flexible Adhesive Heater(100mmx100mm)
Asin: B0BWXKDR8Y | Model: HC35 | PartNumber: HC35 | Ean: 0759357523952 | UPC: 759357523952
【High And Low Temperature Resistance】Polyimide Film Has Very High Heat Resistance, Maximum Temperature: About 170℃.But,Heating Films Can Not Control The Temperature Itself. You Can Use It With A Temperature Controller..
Film Size: 100 X 100Mm/3.93 X3.93Inch(L*W).Equipped With Self-Adhesive Can Be Fixed On The Item Surface Easily.Work Voltage/ Power: 12V/ 25W.
【Widely Used 】Scientific Analysis Instrument. Allow Equipment To Reach Safe Operating Temperatures In Cold Environments. Vacuum Heating And Baking. Car Oil Pan Heating And Mirror Defrost. Snow Or Frost Heating Elements For Antennas Or Radars.Medical Insurance. Beauty Equipment.Scientific Analysis Field, Electronics Manufacturing, Medical Devices..
【Safe To Use】Polyimide Films Have Excellent Electrical Insulation Properties, Maintaining Their Stable Dielectric Properties Over A Wide Range Of Temperatures And Frequencies. Great Resistance Stability. Safe To Use, Stable Performance..
Features
- The polyimide heating film is made of polyimide film as outer insulator, metal foil and wire as inner conductive heating element,and heat-sealed by high temperature and high pressure.It has excellent heat conduction efficiency,and excellent resistance stability.Good softness, Flexible, Fast preheating speed, Long service life, Good stability,
- Safe to Use Polyimide films have excellent electrical insulation properties, maintaining their stable dielectric properties over a wide range of temperatures and frequencies. Great resistance stability. Safe to use, stable performance.
- High and Low Temperature Resistance Polyimide film has very high heat resistance, Maximum Temperature: about 170 .But,heating films can not control the temperature itself. You can use it with a temperature controller.
- Widely Used Scientific Analysis Instrument. Allow equipment to reach safe operating temperatures in cold environments. Vacuum heating and baking. Car oil pan heating and mirror defrost. Snow or frost heating elements for antennas or radars.Medical insurance. Beauty equipment.scientific analysis field, electronics manufacturing, medical devices.
- Film Size: 100 X 100mm/3.93 X3.93inch(L*W).Equipped with self-adhesive can be fixed on the item surface easily.Work Voltage/ Power: 12V/ 25W
- See more on Amazon...
Brand: Generic | Manufacturer: Harissess
Dimensions: 0.60 x 2.60 x 2.60 inches
See On Amazon #18
uxcell 10x25x25mm Black Aluminum Heatsink Thermal Adhesive Pad Cooler for Cooling 3D Printers 6Pcs
Asin: B08HM1ZKJT | Model: a19120300ux0957 | PartNumber: a19120300ux0957
Effectively For Cooling 3D Printer, The Motors Couldn't Sink Heat Into The Frame, And Heatsink Will Reduce The Temperature Of Stepper Motors..
Package Content: 6 X Heatsink..
Easy To Install, It Only Take Seconds To Install..
This Heatsink Come With Thermal Conductivity Adhesive ,Which Can Provide Good Cooling Results..
Features
- Overall Size: 10 x 25 x 25 mm / 0.39 x 0.98 x 0.98 inch; Color Black.
- This heatsink come with thermal conductivity adhesive ,which can provide good cooling results.
- Effectively for cooling 3D printer, the motors couldn't sink heat into the frame, and heatsink will reduce the temperature of stepper motors.
- Easy to install, it only take seconds to install.
- Package Content: 6 x Heatsink.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
12V,25W Silica Gel Flexible Polyimide Heater Plate Adhesive Hot Foil Heater PI Heating Film Automotive Parts,(60 x 70mm,12V,25W)
Asin: B07JVPV2SL | Ean: 0619960302132 | UPC: 619960302132
It Has Excellent Electrical Insulation Performance And Maintains Stable Dielectric Performance Over A Wide Temperature And Frequency Range. Good Resistance Stability. Safe To Use And Stable In Performance..
Widely Used For Heating Automotive Parts, Beauty Instruments, Aviation Products, And Electronic Products..
It Has High Heat Resistance, But The Heating Film Itself Cannot Control The Temperature. You Can Use It With A Temperature Controller..
It Has Excellent Thermal Conductivity Efficiency And Excellent Resistance Stability. Good Softness, Good Flexibility, Fast Preheating Speed, Slow Preheating Speed, Long Service Life, And Good Stability..
Features
- The polyimide heating film is made of polyimide film as the external insulator, and metal foil and wire as the internal conductive heating element through high-temperature and high-pressure thermal sealing.
- It has excellent thermal conductivity efficiency and excellent resistance stability. Good softness, good flexibility, fast preheating speed, slow preheating speed, long service life, and good stability.
- It has excellent electrical insulation performance and maintains stable dielectric performance over a wide temperature and frequency range. Good resistance stability. Safe to use and stable in performance.
- It has high heat resistance, but the heating film itself cannot control the temperature. You can use it with a temperature controller.
- Widely used for heating automotive parts, beauty instruments, aviation products, and electronic products.
- See more on Amazon...
Brand: NICELEC PI Film Heater
Dimensions: 0.00 x 2.36 x 2.76 inches
See On Amazon
Looking For Something Else?
Search