SMALLRIG 4" Camera Suction Mount with Ball Head Magic Arm, Car Mount for Lightweight Camera/Action Camera/Phone, Air Pump Vacuum Suction Cup, Max Load 3kg/6.6 Pound - 4236
Asin: B0C6XQV45Q | Model: 4236-CF | PartNumber: 4236-CF
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Warning Line Design: The Suction Cup Is Locked By A Manual Pump, With A Warning Line, Which Is Safe And Reliable; The Suction Cup Is Equipped With A Dust Cover To Prevent The Suction Cup From Being Stained With Dust When It Is Not In Use, And Prolong Its Service Life. Note: During Use, If The Safety Line Of The Air Extraction Valve Is Exposed, It Means That Air Needs To Be Pumped Immediately. Press The Air Extraction Valve Until The Safety Line Is No Longer Visible Before Continuing To Use..
Precautions: 1. Only Use It On A Clean, Dry, Flat Surface, And Check It At Least Every Two Hours. Do Not Use On Rough, Wet, Uneven, Unclean, Fragile, Or Easily Damaged Surfaces; 2. Please Keep The Suction Cup Chassis And Filter Cotton Intact And Clean; If Damaged Or Dirty, Please Stop Using It Immediately; 3. If There Is A Film On The Surface Of The Adsorbed Object, Please Use It With Caution..
Multiple Mounting Points: The Suction Cup Has Multiple 1/4”-20 Threaded Holes, 3/8”-16 Threaded Holes, And Positioning Holes For Arri, Which Can Be Used With Smallrig 3757, 3873, 3874, 2906B, 2070B, 2115C And Other Brackets..
Quick Disassembly And Assembly: The Magic Arm And The Suction Cup Are Connected Through The Nato Rail, And The Device Can Be Disassembled And Assembled Quickly To Improve Shooting Efficiency; The Magic Arm Can Be Connected To Devices, Such As Some Lightweight Cameras For Sony Zv-E10, For Canon Eos M50, Or Smallrig 3084B, 4119 For Gopro11/10/9, For Dji Action 3, Etc To Realize Vehicle-Mounted Shooting Or Indoor Time-Lapse Photography..
Features
- 3KG Maximum Load-Bearing: The suction cup has strong adsorption force, when the vehicle speed is 80km/h or below, the dynamic load can reach 3kg. The main body of the suction cup is made of rubber material, strong and wear-resistant, suitable for high and low temperature (-20~60 C), good sealing performance, and can be used on smooth, dry and flat surfaces.
- Quick Disassembly and Assembly: The magic arm and the suction cup are connected through the NATO rail, and the device can be disassembled and assembled quickly to improve shooting efficiency; The magic arm can be connected to devices, such as some lightweight cameras for Sony ZV-E10, for Canon EOS M50, or SMALLRIG 3084B, 4119 for GoPro11/10/9, for DJI Action 3, etc to realize vehicle-mounted shooting or indoor time-lapse photography.
- Warning Line Design: The suction cup is locked by a manual pump, with a warning line, which is safe and reliable; the suction cup is equipped with a dust cover to prevent the suction cup from being stained with dust when it is not in use, and prolong its service life. NOTE: During use, if the safety line of the air extraction valve is exposed, it means that air needs to be pumped immediately. Press the air extraction valve until the safety line is no longer visible before continuing to use.
- Multiple Mounting Points: The suction cup has multiple 1/4 -20 threaded holes, 3/8 -16 threaded holes, and positioning holes for Arri, which can be used with SMALLRIG 3757, 3873, 3874, 2906B, 2070B, 2115C and other brackets.
- Precautions: 1. Only use it on a clean, dry, flat surface, and check it at least every two hours. Do not use on rough, wet, uneven, unclean, fragile, or easily damaged surfaces; 2. Please keep the suction cup chassis and filter cotton intact and clean; if damaged or dirty, please stop using it immediately; 3. If there is a film on the surface of the adsorbed object, please use it with caution.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 5.50 x 4.17 x 1.98 Inches | Weight: 0.78 Pounds
See On Amazon Similar To SMALLRIG 4 Camera Suction Mount
#1
SmallRig Clamp w/ 1/4" and 3/8" Thread and 9.8 Inches Adjustable Friction Power Articulating Magic Arm with 1/4" Thread Screw for LCD Monitor/LED Lights - KBUM2732B
Asin: B087T4T8D5 | Model: KBUM2732B-SR | PartNumber: KBUM2732B-SR
【360°Rotation】Double 360 Degrees Ball Head Articulating Design Adjusts Any Angles Based On Your Needs. With 1/4" Thread On Both Ends To Install Any On-Camera Flash Lights, Microphone,Lcd Monitor,Dv Monitor, Microphone On One End And Other Accesorries Like Cage, Nato Rail 1973, 15Mm Rod 1182 And Quick Release Rod Clamp 1976 Etc.
【What You Can Get】Made Of Aluminum Alloy And Stainless Steel, Sturdy And Durable. Package Includes: A Super Clamp And A Articulating Magic Arm.
【Rubber Cushion】Both The Super Clamp And The Articulating Magic Arm Features A Rubber Cushion Which Could Prevent The Scratches Of Monitor And Help To Lock Your Accessories Tighter.
【Super Clamp】This Super Cool Clamp Was Made Of Lightweight Aluminum Alloy, Comes With 1/4"-20 And 3/8"-16 Thread And Can Be Mounted Virtually Anywhere, Such As Cameras, Lights, Umbrellas, Hooks, Shelves, Plate Glass, Cross Bars, Even Other Super Clamps. It Can Open Maximum 54Mm And Minimum 15Mm.
Features
- VERSATILITY SmallRig 2732 comes with a super clamp with 1/4" and 3/8" threads and an articulating arm with 1/4 screws on both ends respectively
- SUPER CLAMP This super cool clamp was made of lightweight aluminum alloy, comes with 1/4-20 and 3/8-16 thread and can be mounted virtually anywhere, such as cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It can open maximum 54mm and minimum 15mm
- 360 ROTATION Double 360 degrees Ball Head Articulating design adjusts any angles based on your needs. With 1/4 thread on both ends to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, microphone on one end and other accesorries like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc
- RUBBER CUSHION Both the Super Clamp and the Articulating Magic Arm features a rubber cushion which could prevent the scratches of monitor and help to lock your accessories tighter
- WHAT YOU CAN GET Made of aluminum alloy and stainless steel, sturdy and durable. Package includes: a Super Clamp and a Articulating Magic Arm
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 1.57 x 8.66 x 4.33 Inches | Weight: 0.89 Pounds
See On Amazon #2
SMALLRIG Field Monitor Mount Monitor Holder Swivel and Tilt Adjustable with Cold Shoe Mount for 5" and 7" Monitor - 2905
Asin: B08LMSXVXK | Model: 2905-AU | PartNumber: 2905-AU | Ean: 6941590001555
Anti-Twist Design: The Camera Monitor Holder Bulid In Bouncy Locating Pins On The Top To Futher Secure Ninja V/ V+, And Silicone Pad To Prevent The Monitor From Scratching And Twisting.
Note: Different Tilt Angle Has Different Load Capcaity, 90° Load Capacity＜9.3 Lbs; 45° Tilt Load Capacity＜5.5 Lbs, 30° Tilt Load Capacity＜5 Lbs. For The Safety, Please Do Use The Allen Wrench To Re-Tighten The 1/4'' Knurled Screw For Further Security.
Wide Compatibility: Features Cold Shoe Adapter At The Bottom To Connect Camera Cage, 1/4"-20 Threaded Hole For Magic Arm Or Stabilizer. 1/4"-20 Screw On The Top Support Monitor, Microphone, Light, Etc.
Upgraded Version: Smallrig 2905B Is An Upgraded Version Monitor Mount. It Is Designed To Support 5” And 7” Camera Monitors Via Cold Shoe On Top Of Camera Cages Or Handles.
Features
- Upgraded Version: SMALLRIG 2905B is an upgraded version monitor mount. It is designed to support 5 and 7 camera monitors via cold shoe on top of camera cages or handles
- Upgraded Version: SMALLRIG 2905B is an upgraded version monitor mount. It is designed to support 5 and 7 camera monitors via cold shoe on top of camera cages or handles
- Anti-Twist Design: The camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V/ V+, and silicone pad to prevent the monitor from scratching and twisting
- Wide Compatibility: Features cold shoe adapter at the bottom to connect camera cage, 1/4-20 threaded hole for magic arm or stabilizer. 1/4-20 screw on the top support monitor, microphone, light, etc
- Note: Different tilt angle has different load capcaity, 90 load capacity 9.3 lbs; 45 tilt load capacity 5.5 lbs, 30 tilt load capacity 5 lbs. For the safety, please do use the Allen Wrench to re-tighten the 1/4'' knurled screw for further security
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 1.18 x 1.65 x 1.87 inches | Weight: 0.17 pounds
See On Amazon #3
SMALLRIG Super Camera Clamp Mount, Double Ball Head Magic Arm Adapter, Fence/Desk/Tripod Mount for Monitor/Light/Camera, for Insta360, for Gopro 1138B
Asin: B00DJ5XH4O | Model: 1138 | PartNumber: 1138 | Ean: 0692833210390 | UPC: 692833210390
More Accessories: We Have Added An Adapter Mount For Gopro, Suitable For More Photographers And Video Producers. Whether You Are Shooting In A Car Or Fixing Your Camera On A Desktop, These Essential Accessories Are Perfect For The Video Era..
Packaging And Note: We Use Full Kraft Paper For Packaging, No Plastic. Inside The Package Are A Super Clamp, And An Action Camera Mount. Please Note: When Using In Dynamic Scenarios, Ensure To Attach The Safety Rope To Prevent Any Accidental Device Drops!.
Your Premium Choice: Crafted From Aluminum And Stainless Steel, This Super Clamp Endures Years Of Testing. A Product With A Decade Of Sales History, Chosen By Approximately 300,000 Users. We Ensure Satisfying After-Sales Service For Your Peace Of Mind..
Wide Compatibility: The 1138B Multi-Function Dual Ball Head Comes With Clamps And 1/4"-20 Screw To Mount Cameras, Webcams, Monitors, Lights, Microphones, Action Cameras, Or Any Gear. Then, Lock The Clamps To The Rod/Tube/Table/Frame/Tripod With The Locking Knob; No Drilling Required..
Features
- Sturdier Upgrade: The 1138B has been enhanced with non-slip threads and an anti-twist structure based on the classic design of the 1138 crab super clamp, supporting up to 1.5kg without loosening. Allows you to focus on content creation.
- Wide Compatibility: The 1138B Multi-Function dual ball head comes with clamps and 1/4-20 screw to mount cameras, webcams, monitors, lights, microphones, action cameras, or any gear. Then, lock the clamps to the rod/tube/table/frame/tripod with the locking knob; no drilling required.
- More Accessories: We have added an adapter mount for GoPro, suitable for more photographers and video producers. Whether you are shooting in a car or fixing your camera on a desktop, these essential accessories are perfect for the video era.
- Your Premium Choice: Crafted from aluminum and stainless steel, this super clamp endures years of testing. A product with a decade of sales history, chosen by approximately 300,000 users. We ensure satisfying after-sales service for your peace of mind.
- Packaging and Note: We use full kraft paper for packaging, no plastic. Inside the package are a super clamp, and an action camera mount. Please note: When using in dynamic scenarios, ensure to attach the safety rope to prevent any accidental device drops!
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 0.98 x 3.74 x 3.35 Inches | Weight: 0.44 Pounds
Warranty: 2 year manufacturer
See On Amazon #4
SmallRig Cold Shoe Mount (2pcs Pack) with 1/4"-20 Thread for Camera Cage Flash LED Monitor Microphone - 2060
Asin: B075M528JB | Model: 2060-AU | PartNumber: 2060-AU | Ean: 6972070624568
【Easy To Use】Secure Tightly Via The Two M2.5 Screws, And A 1/4" Thread Hole For You To Attach To The Camera Cage, Plate, Handles, Or Other Accessories..
【Product Information】Package Included: 2 X 1/4"-20 Screw; 4 X M2.5 Screws; 2 X Hex Spanner, 2 X Cold Shoe Mount. Diameter: 25Mm X 25Mm/ 0.98"X0.98"; Material: Aluminum Alloy..
【Note】This Cold Shoe Mount Is Not Suitable For Dji Gimbal And Not For Zhiyun As Well. For Use On A Cage, Except For Smallrig Full Cage 1661, You Only Need To Lock It On The Cage Via The Included 1/4"-20 Screw, The M2.5 Threaded Is Unnecessary..
【Sweet Ant-Off Design】We Specially Offer Two White Arrows On The Surface To Show The Mounting Ways For Your Convenience. It Comes With Two Secure Bending Bevels On One End To Prevent Accidental Removal..
【Wide Application】This Shoe Adapter Allows You To Attach A Microphone, Flash, Or Led, On Accessories Of Cameras Such As Handles, Cages, Etc. Perfectly Fit For All The Accessories With 1/4"-20 Threaded Holes..
Features
- Standard Shoe Adapter Compatible could be mounted on any camera accessories with 1/4" or M2.5 threaded holes, such as cage, cold shoe block, handle, plate, etc. Compatible with Cage for Sony ZV-E10, Such as Cage for Sony (a6500 a6300 a6700), etc.
- Wide Application This shoe adapter allows you to attach a Microphone, Flash, or LED, on accessories of cameras such as handles, cages, etc. Perfectly fit for all the accessories with 1/4-20 threaded holes.
- Easy to Use Secure tightly via the two M2.5 screws, and a 1/4 thread hole for you to attach to the camera cage, plate, handles, or other accessories.
- Sweet Ant-Off Design We specially offer two white arrows on the surface to show the mounting ways for your convenience. It comes with two secure bending bevels on one end to prevent accidental removal.
- Product Information Package included: 2 x 1/4-20 screw; 4 x M2.5 Screws; 2 x Hex spanner, 2 x Cold Shoe Mount. Diameter: 25mm x 25mm/ 0.98x0.98; Material: Aluminum Alloy.
- NOTE This Cold Shoe Mount is NOT suitable for DJI gimbal and NOT for ZHIYUN as well. For use on a cage, except for SmallRig Full Cage 1661, you only need to lock it on the cage via the included 1/4-20 screw, the M2.5 threaded is unnecessary.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 0.35 x 0.98 x 0.98 inches | Weight: 0.07 Pounds
See On Amazon #5
SmallRig Camera Base Plate with 15mm LWS Rod Rail Clamp, Baseplate for Sony A6500 A6600 A6300, for Canon R5 R6, for Sony A7SIII / A7III, Both for Cameras & Cages - 1674
Asin: B0197OP4PU | Model: 1674 | PartNumber: 1674 | Ean: 6972070622076
【Scientific Thread Arrangement】With 1/4''-20 & 3/8''-16 Threads On The Bottom, This Base Plate Can Be Attached To Quick Release Plate And Then Be Attached On Any Tripod Such As Smallrig Freeblazer Carbon Fiber Tripod 3989 (Not Included)..
【What You Get】1 X Base Plate; 1 X 1/4'' Fixing Screw; 1 X 3/8'' Fixing Screw; 2 X 1/4''-20 Screw; 1 X Hex Spanner.
【Easily Attachment On Cameras/Cages】The Base Plate Comes With 1/4 And 3/8 Screws And Can Be Used On The Camera Cages, Or Directly On Cameras. This Solid Baseplate Features Rubber Padding On Top Of The Plate To Prevent Twisting And Scratching..
【15Mm Lws Rod Support】The Base Plate Features 15Mm Diameter And 60Mm Spaced Rod Holes That Allow You To Mount A Follow Focus, Matte Box, Lens Support, Or Other Accessories. The Plate Is Contoured To Fit With Shoulder Pads While Also Remaining Lightweight..
Features
- Classic Universal Baseplate SmallRig Baseplate with Dual 15mm Rod Clamp 1674 is a simple and light base plate for the currently popular cameras and camera cages, such as for Sony A6500/A6300/A6600, for Sony A7SIII/A7RV/ ZVE-10, for Canon R5 R6, for Fujifilm XT-5, etc. The baseplate assists the camera to switch quickly between the tripod, shoulder, and other shooting modes.
- 15mm LWS Rod Support The base plate features 15mm diameter and 60mm spaced rod holes that allow you to mount a follow focus, matte box, lens support, or other accessories. The plate is contoured to fit with shoulder pads while also remaining lightweight.
- Scientific Thread Arrangement With 1/4''-20 & 3/8''-16 threads on the bottom, this base plate can be attached to quick release plate and then be attached on any tripod such as SmallRig FreeBlazer Carbon Fiber Tripod 3989 (not included).
- Easily Attachment on Cameras/Cages The base plate comes with 1/4 and 3/8 screws and can be used on the camera cages, or directly on cameras. This solid baseplate features rubber padding on top of the plate to prevent twisting and scratching.
- What You Get 1 x base plate; 1 x 1/4'' fixing screw; 1 x 3/8'' fixing screw; 2 x 1/4''-20 screw; 1 x hex spanner
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.02 x 3.15 x 1.69 inches | Weight: 0.37 pounds
See On Amazon #6
SmallRig 1/4" Camera Hot Shoe Mount, Ballhead Tripod with Additional 1/4" Screw, 2pcs Pack - 2059
Asin: B075M336JZ | Model: 4332041521 | PartNumber: 4332041521 | Ean: 6972070623325
【Adjustable Direction】The Ball Head Can Be Adjusted Into Most Any Position For A Better Viewing Angle.
【Package Included】2 X Mini Ball Head Mount. This Item Is Two Pcs Pack. If You Need One Pcs Pack, Please See The Smallrig 761..
【Note】The Ball Head Maximum Load: 3 Kg.
【Wide Compatibility】 The Cold Shoe Adapter Works For Most Cameras Including For Canon, For Nikon, For Olympus, For Pentax, For Panasonic, For Fujifilm, For Kodak, Etc.
Features
- MINI BALL HEAD SmallRig Mini Ball Head Mount 2059 is designed to attach the camera tightly via a cold shoe adapter, while the 1/4" screw could be mounted on the monitor in adjustable directions in different scenarios and could be locked via a wingnut.
- WIDE COMPATIBILITY The cold shoe adapter works for most cameras including for Canon, for Nikon, for Olympus, for Pentax, for Panasonic, for Fujifilm, for Kodak, etc
- ADJUSTABLE DIRECTION The ball head can be adjusted into most any position for a better viewing angle
- NOTE The ball head maximum load: 3 kg
- PACKAGE INCLUDED 2 x Mini Ball Head Mount. this item is TWO PCS pack. If you need one PCS pack, please see the SMALLRIG 761.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.38 x 2.36 x 0.98 Inches | Weight: 0.30 Pounds
See On Amazon #7
SmallRig V-Mount Battery Plate, V Lock Battery Mounting Plate with Double Quick Release Plate for Arca-Swiss, L-Shape Compact & Foldable V Mount Battery Plate for DSLR Camera, Gimbals & Tripod - 4064B
Asin: B0C1NHKRFR | Model: 4064 | PartNumber: 4064 | Ean: 6941590012445
Widely Compatibility: This V-Mount Battery Plate Is Very Versatile And Universal, It Is Suitable For Most Camera Models On The Market, For Mirrorless / Dslr Cameras Less Than 111Mm Thick, Like For Sony Alpha 7R V / Alpha 7 Iv / Alpha 7S Iii / Alpha 7C / Fx3 / Fx30, For Canon Eos R5c / R5 / R6 / R6 Mark Ii / R7 / R10 / R / Rp, For Panasonic Lumix S1h / S1r / S1 / S5 / S5 Ii / Gh6 / Gh5..
Smart Rotatable Design: The V-Mount Plate Can Be Rotated And Adjusted By 180°. Adjust Forward For Convenient Storage, Adjust Backward For Enough Space To Open The Camera Flip Screen. This Rotating Design Does Not Require You To Remove The Battery First, Which Effectively Saves Time. And It Also With Pivot Dampening Preventing Your Device From Falling..
Expand Your Creativity: This V-Mount Battery Plate Has A Mini V-Mount Plate With 1/4 "-20 Threads, Which Makes This V-Mounted Battery Plate Compatible With Np-F Battery Adapter Plate(Id:3168B) And Power Bank Holder(Id:Bub2336), Thus Realizing More Diversified Battery Solutions..
Double Quick Release Plate For Arca-Swiss: It Comes With Two Qr Plates For Arca, One Can Be Mounted On The Bottom Of The Camera Or Cage To Give Them Quick Release Functionality. The Other Can Be Mounted On The Bottom Of The Plate As You Require It To Enable Quick Switching Among Handheld, Stabilizer, And Tripod Shooting. If You Don't Need A Qr Plate For Arca, Then You Can Use The 1/4"-20 And 3/8"-16 Threaded Hole On The Bottom Of The Plate To Mount The Quick Release Plate You Need, Such As For Manfrotto Etc..
Stretchable Baseplate: The Baseplate Of This V-Mount Battery Plate Is Stretchable, And The Maximum Stretchable Distance Is 36.5 Mm / 1.43 Inch, Which Meets The Needs Of Cameras Of Different Sizes And Improves The Compatibility. Locking And Releasing The Rod Is Realized By A Toggle Lock, Which Is Fast And Time-Saving Without The Needs Of Tools..
Features
- Versatile and Compact Design: SmallRig V-mount battery plate 4064B adopts L-shaped design, which integrates quick release plate for Arca-Swiss, V-mount battery plate, stretchable rod and 1/4"-20 threads to realize quick installation and adjustment of camera and battery. Folding and lightweight design, only 117 mm x 31.5 mm, 230g, easy to store and carry round.
- Stretchable Baseplate: The baseplate of this V-mount battery plate is stretchable, and the maximum stretchable distance is 36.5 mm / 1.43 inch, which meets the needs of cameras of different sizes and improves the compatibility. Locking and releasing the rod is realized by a toggle lock, which is fast and time-saving without the needs of tools.
- Widely Compatibility: This V-mount battery plate is very versatile and universal, it is suitable for most camera models on the market, for Mirrorless / DSLR cameras less than 111mm thick, like for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 7C / FX3 / FX30, for Canon EOS R5C / R5 / R6 / R6 Mark II / R7 / R10 / R / RP, for Panasonic LUMIX S1H / S1R / S1 / S5 / S5 II / GH6 / GH5.
- Double Quick Release Plate for Arca-Swiss: It comes with two QR plates for Arca, one can be mounted on the bottom of the camera or cage to give them quick release functionality. The other can be mounted on the bottom of the plate as you require it to enable quick switching among handheld, stabilizer, and tripod shooting. If you don't need a QR plate for Arca, then you can use the 1/4-20 and 3/8-16 threaded hole on the bottom of the plate to mount the quick release plate you need, such as for Manfrotto etc.
- Smart Rotatable Design: The V-Mount plate can be rotated and adjusted by 180 . Adjust forward for convenient storage, adjust backward for enough space to open the camera flip screen. This rotating design does not require you to remove the battery first, which effectively saves time. And it also with pivot dampening preventing your device from falling.
- Expand Your Creativity: This V-mount battery Plate has a mini V-mount plate with 1/4 -20 threads, which makes this V-mounted battery plate compatible with NP-F battery adapter plate(ID:3168B) and power bank holder(ID:BUB2336), thus realizing more diversified battery solutions.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.30 x 4.61 x 3.62 Inches | Weight: 0.61 Pounds
Warranty: 2-Year Warranty (1-Year for Electronic Products)
See On Amazon #8
SmallRig Universal Magic Arm with Small Ballhead (2pcs) 2158
Asin: B07K84X662 | Model: 2158-CF-FBA-US | PartNumber: 2158-CF-FBA-US | Ean: 0645249533379 | UPC: 645249533379
▲Notice▲ Not Recommend For Monitor Or Led Light Over 1.0 Kg.
▲Smaller Model▲ This Is The Smaller Model Of Smallrig Magic Arm With Small Ballhead 2163. If You Need A Bigger One, Please Check The Smallrig 2163.
▲1/4 Screws▲Equipped With 1/4” Screws At Both Ends. It Could Attach Camera Cage, Top Plate And Top Handle 1955/1984 On The One End, While Attach Monitor Or Video Light On The Other End.
▲Lock Tight▲ Tightened With A Wingnut Quickly And Conveniently. It Is Easy To Use And Can Help You Lock Tightly. Needn’T Worry About Dropping.
Features
- ADJUST ALL ANGLES Features a wingnut in the middle to adjust the angles and positions of monitor or video light or other accessories. It supports rotation of any angles
- LOCK TIGHT Tightened with a wingnut quickly and conveniently. It is easy to use and can help you lock tightly. Needn t worry about dropping
- NOTICE Not recommend for monitor or LED light over 1.0 kg
- 1/4 SCREWS Equipped with 1/4 screws at both ends. It could attach camera cage, top plate and Top Handle 1955/1984 on the one end, while attach monitor or video light on the other end
- SMALLER MODEL This is the smaller model of SMALLRIG Magic Arm with Small Ballhead 2163. If you need a bigger one, please check the SMALLRIG 2163
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 0.71 x 2.83 x 1.18 inches | Weight: 0.14 Pounds
See On Amazon #9
SMALLRIG Super Clamp with 1/4 and 3/8 Thread for Cameras, Lights, Umbrellas, Hooks, Shelves, Plate Glass, Cross Bars, etc - 735
Asin: B0062U2M4E | Model: 735-SR | PartNumber: 735-SR | Ean: 6820115804928
【For More Accessories】The Clamp Features 1/4’’ Threaded Holes And 3/8 Threaded Hole, Which Allow You To Attach More Accessories, Such As Ballhead 1135, Magic Arm 2070..
【Better Protecetion】The Updated Rubber Pads On The Clamp Parts Prevent Your Application From Slipping And Scratching..
【What You Get】1 X Super Clamp.
【High-Quality】Made Of Aluminum Alloy And Stainless Steel, Sturdy And Durable..
【Adjustable Jaw】The Jaw Opens To Max About 1.57" (40Mm), And Minimum 15Mm. You Can Clip It On Anything Less Than 40Mm Thick And More Than 15Mm..
Features
- VERSATILITY The super clamp is designed to mount onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It's up to your imagination & inventive ideas.
- ADJUSTABLE JAW The jaw opens to max about 1.57 (40mm), and minimum 15mm. You can clip it on anything less than 40mm thick and more than 15mm.
- FOR MORE ACCESSORIES The clamp features 1/4 threaded holes and 3/8 threaded hole, which allow you to attach more accessories, such as ballhead 1135, magic arm 2070.
- High-Quality Made of aluminum alloy and stainless steel, sturdy and durable.
- BETTER PROTECETION The updated rubber pads on the clamp parts prevent your application from slipping and scratching.
- What You Get 1 x super clamp
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.77 x 1.73 x 0.79 inches | Weight: 0.29 pounds
See On Amazon #10
SmallRig Adjustable Camera Monitor Mount for ARRI-Style (Upgrade), 360 Swivel and 180 Tilt Monitor Holder Anti-Twist Support 5 and 7 Field Monitor- 2903B
Asin: B08JLZHYVC
Quickly Tightened: The Mount Can Tilt 180 Degree And And Swivel 360 Degree, Different With The Old Mode (2903) Using Allen Wrench, This Upgrade Monitor (2903B) Is Quickly Tightened Via A Knob To Suit Different Angle.
High Quality: Made Of Cnc-Machined Aluminum Alloy And Stainless Steel, Sturdy Enough To Support And Protect 5’’ And 7’’ Filed Monitor, Different Tilt Angle Has Different Load Capcaity, 90 Degree<4.2Kg, 45 Degree<2.5Kg, 30 Degree<2.3Kg.
Multiple Threaded Holes: Features Locating Screw For Arri At The Bottom To Connect Camera Cage And 1/4"-20 Threaded Holes For Magic Arm Or Stabilizer. 1/4"-20 Screw On The Top Support Monitor, Microphone, Light, Etc.
Dual Anti-Twist Design: The Camera Monitor Holder Bulid In Bouncy Locating Pins On The Top To Futher Secure Ninja V/ V+, And Silicone Pad To Prevent The Monitor From Scratching And Twisting.
Features
- For 5 and 7 Monitor: SmallRig adjustable monitor mount is designed to support 5 and 7 camera monitors via screw mount for ARRI on the top of camera cage or other mounting system
- Dual Anti-Twist Design: The camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V/ V+, and silicone pad to prevent the monitor from scratching and twisting
- Quickly Tightened: The mount can tilt 180 degree and and swivel 360 degree, different with the old mode (2903) using Allen Wrench, this upgrade monitor (2903B) is quickly tightened via a knob to suit different angle
- Multiple Threaded Holes: Features locating screw for ARRI at the bottom to connect camera cage and 1/4-20 threaded holes for magic arm or stabilizer. 1/4-20 screw on the top support monitor, microphone, light, etc
- High Quality: Made of CNC-Machined aluminum alloy and stainless steel, sturdy enough to support and protect 5 and 7 filed monitor, different tilt angle has different load capcaity, 90 degree<4.2kg, 45 degree<2.5kg, 30 degree<2.3kg
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 1.34 x 1.65 x 1.61 inches | Weight: 0.20 Pounds
See On Amazon #11
SmallRig Battery Plate with V-Lock Mount with Dual 15mm Rod Clamp for Camera Power Supply - 3016
Asin: B08RMR8X1Q | Model: 3016-SR | PartNumber: 3016-SR
【Multiple Mounting Points】The Plate Itself Features Multiple 1/4"-20 Countersinks, M3 Countersinks, M4 Countersinks, 1/4"-20 Thread Holes, M4 Thread Holes, And A Locating Hole For Arri To Attach A Dual Rod Clamp, A Magic Arm, Or Other Accessories..
【High Customization】Two Stoppers Will Prevent The Battery From Twisting When Attached. The Plate Is Also For Blackmagic Ursa Mini. (Note: 1. No V-Lock Part (Male) Provided With The Plate. 2. This Is Purely A Mounting Solution For A V-Mount Battery — No Power Ports On The Plate.).
【Related Products】Smallrig Mini V-Mount Battery Vb50 (50Wh) 3579 And Vb99 (99Wh) 3580 Are Now Available, Multi-Interfaces And Pd Fast-Charging Design, Widely Compatibility Use For Cameras, Camcorders, Monitors, Smartphones, Etc..
【Wide Compatibility】The Mount Features A V-Lock Mount With A Quick-Release Lever That Fits Most V-Mount Batteries, But It Is Not Compatible With Paglink Series V Mount Batteries Or Patona Premium Battery For Bp-190Ws. The Mount Has No Electronics And Is Meant To Mount A Battery That Has Its Own Power Outputs To Power Your Gear..
【Comes With Dual Rod Clamp】It Comes With A Dual 15Mm Rod Clamp, Which Allows You To Mount The Battery Plate Onto Standard 15Mm Lws Rods..
Features
- V-Lock Battery Plate SmallRig V Mount Battery Plate with Dual 15mm Rod Clamp 3016 utilizing a standard V mount fits most V mount batteries to provide more excellent battery life for your camera rig with your battery's power port(s).
- Comes with Dual Rod Clamp It comes with a dual 15mm rod clamp, which allows you to mount the battery plate onto standard 15mm LWS rods.
- Multiple Mounting Points The plate itself features multiple 1/4-20 countersinks, M3 countersinks, M4 countersinks, 1/4-20 thread holes, M4 thread holes, and a locating hole for ARRI to attach a dual rod clamp, a magic arm, or other accessories.
- Wide Compatibility The mount features a V-lock mount with a quick-release lever that fits most V-mount batteries, but it is not compatible with PAGlink series V mount batteries or Patona Premium Battery for BP-190WS. The mount has no electronics and is meant to mount a battery that has its own power outputs to power your gear.
- High Customization Two stoppers will prevent the battery from twisting when attached. The plate is also for Blackmagic URSA mini. (Note: 1. No V-Lock part (male) provided with the plate. 2. This is purely a mounting solution for a V-mount battery no power ports on the plate.)
- Related Products SmallRig mini V-mount Battery VB50 (50Wh) 3579 and VB99 (99Wh) 3580 are now available, multi-interfaces and PD fast-charging design, widely compatibility use for cameras, camcorders, monitors, smartphones, etc.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 0.67 x 5.24 x 4.25 inches | Weight: 0.42 pounds
See On Amazon #12
SMALLRIG Metal Phone Support with Cold Shoe Mount, Universal Cell Phone Mount Adapter Support Free Adjustment Joints, Phone Tripod Mount for iPhone 15 14, for Samsung Galaxy etc. - 4382
Asin: B0CP41876D | Model: 4382-CF | PartNumber: 4382-CF
Universal Compatibility: It Supports Smartphones With A Width Of 57-88Mm / 2.5-3.5In (For Samsung, For Iphone 15/15 Pro /15 Pro Max / For Iphone 14/14 Pro /14 Pro Max / For Iphone 13 /13 Pro /13 Pro Max / For Iphone 12 Pro Max And So On).
Package Included: Phone Holder X 1. Please Note That The Load Capacity Is 500G.
Threaded Holes & Cold Shoe: Designed With Well-Spaced Threaded Holes To Facilitate The Installation Of Power Bank Holders (Id: 2336 / 2790). There Is A Cold Shoe Mount On Top For Microphone Or Light.
Support Landscape And Portrait Modes: The Phone Holder Can Be Quick Switching Between Landscape And Portrait Modes, And Securely Lock When Rotated To 90° Degrees. Two Rotary Joints Supports 180 Degrees Adjustment.
Features
- Universal Phone Holder: This multifunctional phone clamp can be mounted on the top of a camera or tripod through 1/4"-20 threaded hole or cold shoe at the bottom for photography, live-streaming, vlogging, interviews, etc
- Support Landscape and Portrait Modes: The phone holder can be quick switching between landscape and portrait modes, and securely lock when rotated to 90 degrees. Two rotary joints supports 180 degrees adjustment
- Universal Compatibility: It supports smartphones with a width of 57-88mm / 2.5-3.5in (for Samsung, for iPhone 15/15 Pro /15 Pro Max / for iPhone 14/14 Pro /14 Pro Max / for iPhone 13 /13 Pro /13 Pro Max / for iPhone 12 Pro Max and so on)
- Threaded Holes & Cold Shoe: Designed with well-spaced threaded holes to facilitate the installation of power bank holders (ID: 2336 / 2790). There is a cold shoe mount on top for microphone or light
- Package Included: phone holder x 1. Please note that the load capacity is 500g
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.23 x 4.06 x 1.63 inches | Weight: 0.16 Pounds
See On Amazon #13
SmallRig Cool Ballhead, Multi-Function Double Ball Dead Adapter with Shoe Mount & 1/4" Screw for Monitors Led Light Microphone - 1135
Asin: B00DA38C3G | Model: 4331911719 | PartNumber: 4331911719 | Ean: 0694977330057, 6972070624513 | UPC: 694977330057
【Easy To Lock】The Locking Knob Is Used For Securing And Operating The Ball Head Faster.
【Notice】Not Recommend For Monitor Or Led Light Over 1.0 Kg/2.2 Lbs..
【Comes With Shoe Base】The Ballhead Comes With A Shoe Base, Which Could Mount On A Camera Cage/Handle/Plate, Or Directly On Cameras Such As Or Canon, For Nikon, For Olympus, For Pentax, For Panasonic, For Fujifilm & For Kodak..
【180 Degree Rotation】The Ball Mount Can Be Easily Rotated By 180 Degrees And Secured By The Side Wingnut For A Perfect Viewing Angle.
Features
- Wide Application A universal double ball head with cold shoe and 1/4 screw on both ends, and can be widely used with a monitor/small action camera/LED Lights/microphones/flash when shooting
- 180 Degree Rotation The ball mount can be easily rotated by 180 degrees and secured by the side wingnut for a perfect viewing angle
- Easy to Lock the locking knob is used for securing and operating the ball head faster
- Comes with Shoe Base The ballhead comes with a shoe base, which could mount on a camera cage/handle/plate, or directly on cameras such as or Canon, for Nikon, for Olympus, for Pentax, for Panasonic, for Fujifilm & for Kodak.
- NOTICE not recommend for monitor or LED light over 1.0 kg/2.2 lbs.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 3.90 x 0.94 x 0.94 inches | Weight: 0.20 pounds
See On Amazon #14
SmallRig V Mount Battery VB99 Pro, 99Wh / 6700mAh mini V-Mount Battery with PD 100W USB-C Fast Charging, with D-TAP, Dual USB-C & DC Ports, USB-A, TFT Display for Camera, Camcorder, Video Light - 4292
Asin: B0CLGQDFCG | Model: VB99 Pro | PartNumber: VB99 Pro
Sufficient V-Mount Battery: Smallrig V Mount Battery 4292 With High Capacity Of 99Wh(6700Mah / 14.8V), Built-In High-Quality Lg Power Battery Cells, To Bring Powerful Battery Life For Long Video Making And Photography Projects, Good Power Backup Solution For Photographers And Filmmakers. The Battery Includes A 240W Usb-C Charging Cable For Faster, More Stable Charging. Upgrade Your Charging Experience With Reliability And Efficiency..
Smallrig V Mount Battery Series: Apart From This 99Wh Battery, We Also Have Vb99 99Wh V Mount Battery 3580(Asin: B0b6z9k42p), 50Wh 3579(Asin: B0bqlv3w1f) , 155Wh 3581(Asin:B0b6zcnf1p), And 212Wh 4293(Asin: B0cysw6r9p), Meet Your Different Capacities Needs..
Status At A Glance: On The Front Of The Smallrig V-Mount Battery Is A Bright, Crystal Clear Tft Color Display, Conveniently Gives You An Accurate Reading Of Each Port And Total Output Power. Monitor Battery Life And Power Output In Real Time To Stay In Control. Note: The Side Status Button Is Only Used To Wake Up The Screen And Check The Battery Condition, Cannot Turn Off The Battery..
Palm Size & Airline Friendly: Only 4.2 × 2.9 × 2.2 Inches, Weighs 23.3 Oz, About 30% Smaller Than Traditional V-Mount Batteries, Fits Easily In Backpacks And Pockets, Say Goodbye To Bulky, Airline Friendly Feel Free To Carry Outside And Travel. And Its Shell Is Made Of Sturdy, Drop-Proof Aluminum Alloy And Fireproof Pc And Features Durable. Scratch-Resistant Pc And Acrylic Cover Add Durability And Protect The Tft Display That Shows Battery Status Clearly And Accurately..
Advanced Bms Technology: Equipped With An Intelligent Battery Management System (Bms), This V Mount Battery Ensures Optimal Performance And Safety. Enjoy Peace Of Mind Knowing Your Power Source Is Protected Against Short Circuit, Over-Temperature, Over-Voltage, Over-Current, Over-Load And Over-Discharge, So You Don't Have To Worry About Damaging Your Camera And Devices. This Battery Has Passed The Certification Of Fcc/Ce/Rohs/Msds/Un38.3/Iec62133/Ul2054/Ul62368, More Safe And Reliable..
Multiple Interfaces: This V Mount Battery Comes With Two Usb-C; One Usb-A, Dc 5.5 X 2.1Mm 8V, Dc 5.5 X 2.5Mm 12V, Bp And D-Tap Ports, Which Are More Versatile And Support Powering Multiple Devices Simultaneously, Such As Dslr Camera, Camcorder, Monitor, Smartphone, Wireless Video Transmitter, Tablet, Laptop And Video Light, Etc. It Also Has A 1/4"-20 & 3/8"-16 Threaded Hole On The V-Lock, You Can Hold It With A Ball Head Or Other Clamp..
Features
- Bi-direction PD 100W Rapid Charging: SmallRig VB99 Pro V Mount Battery boasts lightning-fast charging capabilities, supports a wide range of fast charging protocols (such as PD3.0 / QC2.0 / QC3.0 / PPS, etc.). It supports high power USB-C bi-directional PD fast charge/discharge up to 100W, you can have a full charged battery in just 2.5 hours. Adopts a parallel circuit, fast charging no slowing down. The output power will not be reduced when charging multiple devices at the same time (total no over 100W).
- Multiple Interfaces: This V mount battery comes with two USB-C; one USB-A, DC 5.5 x 2.1mm 8V, DC 5.5 x 2.5mm 12V, BP and D-TAP ports, which are more versatile and support powering multiple devices simultaneously, such as DSLR camera, camcorder, monitor, smartphone, wireless video transmitter, tablet, laptop and video light, etc. It also has a 1/4-20 & 3/8-16 threaded hole on the V-lock, you can hold it with a ball head or other clamp.
- Sufficient V-mount Battery: SmallRig V mount battery 4292 with high capacity of 99Wh(6700mAh / 14.8V), built-in high-quality LG power battery cells, to bring powerful battery life for long video making and photography projects, good power backup solution for photographers and filmmakers. The battery includes a 240W USB-C charging cable for faster, more stable charging. Upgrade your charging experience with reliability and efficiency.
- Advanced BMS Technology: Equipped with an intelligent Battery Management System (BMS), this V mount battery ensures optimal performance and safety. Enjoy peace of mind knowing your power source is protected against short circuit, over-temperature, over-voltage, over-current, over-load and over-discharge, so you don't have to worry about damaging your camera and devices. This battery has passed the certification of FCC/CE/RoHS/MSDS/UN38.3/IEC62133/UL2054/UL62368, more safe and reliable.
- Status at a Glance: On the front of the SmallRig V-mount battery is a bright, crystal clear TFT color display, conveniently gives you an accurate reading of each port and total output power. Monitor battery life and power output in real time to stay in control. Note: The side status button is only used to wake up the screen and check the battery condition, cannot turn off the battery.
- Palm Size & Airline Friendly: Only 4.2 2.9 2.2 inches, weighs 23.3 oz, about 30% smaller than traditional V-mount batteries, fits easily in backpacks and pockets, say goodbye to bulky, airline friendly feel free to carry outside and travel. And Its shell is made of sturdy, drop-proof aluminum alloy and fireproof PC and features durable. Scratch-resistant PC and acrylic cover add durability and protect the TFT display that shows battery status clearly and accurately.
- SmallRig V Mount Battery Series: Apart from this 99Wh battery, we also have VB99 99Wh V mount battery 3580(Asin: B0B6Z9K42P), 50Wh 3579(Asin: B0BQLV3W1F) , 155Wh 3581(Asin:B0B6ZCNF1P), and 212Wh 4293(Asin: B0CYSW6R9P), meet your different capacities needs.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 4.21 x 2.87 x 2.17 inches | Weight: 1.46 pounds
Warranty: 2-Year Warranty
See On Amazon #15
SmallRig Multifunctional Universal Cell Phone Mount Adapter, Phone Tripod Mount with Cold Shoe, Phone Holder for iPhone 15 14 13 12 11, Fits for Tripod Monopod Phone Cage Camera cage-3559
Asin: B09S5TP48T | Model: 3559-AC | PartNumber: 3559-AC
【Portable And Light Weight】 The Portable Holder Weighs Only 60G And The Weight Capacity Is Up To 500G. It Is Made Of Sturdy And Durable Metal, And Comes With Anti-Slip Silicon Pads To Protect Smartphones From Scratches..
【Compatibility】 It’S Compatible With Most Smartphones In The Market With Width Ranging From 58.5Mm To 83Mm.(For Iphone 15 / 14/ 13 / 12 Pro / Pro Max And So On).
【Double Cold Shoes】 Smallrig Phone Clamp Holder 3559 Comes With 2 Cold Shoes And 1/4" Threaded Hole Allowing Mount Of Different Accessories..
【Support Horizontal And Vertical Shots】 It Tilts 180° For Comfortable Monitoring And Rotates 360° For Quick Switch Between Horizontal And Vertical Shot..
Features
- Universal Smartphone Holder SmallRig Universal Metal Phone Holder 3559 is designed for smartphone users to achieve photography, live-streaming, vlogging, interviews, etc. with their smartphones.
- Support Horizontal and Vertical Shots It tilts 180 for comfortable monitoring and rotates 360 for quick switch between horizontal and vertical shot.
- Portable and Light Weight The portable holder weighs only 60g and the weight capacity is up to 500g. It is made of sturdy and durable metal, and comes with anti-slip silicon pads to protect smartphones from scratches.
- Double Cold Shoes SmallRig phone clamp holder 3559 comes with 2 cold shoes and 1/4 threaded hole allowing mount of different accessories.
- Compatibility It s compatible with most smartphones in the market with width ranging from 58.5mm to 83mm.(for iPhone 15 / 14/ 13 / 12 Pro / Pro Max and so on)
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.45 x 4.27 x 1.03 inches | Weight: 0.13 Pounds
See On Amazon #16
SMALLRIG Quick Release Plate Drop-in HawkLock Mini Quick Release Camera Mount Adapter with 1/4" Screw, for Camera Clamp, Super Clamp, Ball Head, Tripod, Magic Arm, Stabilizer, Field Monitor - 3513C
Asin: B09MHY8HVS | Model: 3513-SR | PartNumber: 3513-SR
Safer & Faster: Smallrig Quick Release Plate Features Dual Locking Structure Inside The Baseplate, Provides High Load Capacity Of 5 Kg. The Quick Release Top Plate Can Buckle Vertically And Stably Into The Baseplate, Causing Not Deflection. Vertical Installation Is Faster And Solid Than Traditional Slide-In Installation.
Patented Hawklock Qr Ecosystem: To Improve Your Usage Experience, We've Released A Convenient Hawklock Ecosystem Of Well-Designed And High-Quality Quick Release Accessories, Such As Qr Plate Kit 3513, Cold Shoe Monitor Mount 3514, Magic Arm 3515, Nato Monitor Mount 3601, Qr Top Plate 3730, Qr Baseplate 3731, Ball Head 3600.
Durable & Reliable: The Quick Release Camera Mount Made Of Aluminum Alloy, Only 37G, Mini Size And Super Lightweight, Sturdy And Durable For A Long Use. Maximum Dynamic Load Capacity Of 5 Kg, Supports Most Devices In The Market. With Built-In Rubber Pads, Protect Against Deflection And Scratches.
Top Plate & Base Plate: The Mini Quick Release Plate Kit Comprises A Quick Release Top Plate And A Baseplate. Quickly Locked And Unlocked Through A Click Without Jamming. Allows You To Release And Lock Cameras, Smartphones, Monitors, And Lights In A Second Instead Of Screwing, Greatly Save Your Time.
Features
- Wide Compatibility: The quick release plate features a 1/4"-20 screw supports devices such as camera, monitor, cage, light, etc. And the quick release plate is reserved for 2 optional dowel pins, which can be removed and installed as needed to effectively prevent the devices from deflection. It also has a 1/4"-20 threaded hole on the bottom to allow attaching devices with 1/4"-20 screw (NOT over 6mm), like super clamp, tabletop tripod, ballhead, etc
- Top Plate & Base Plate: The mini quick release plate kit comprises a quick release top plate and a baseplate. Quickly locked and unlocked through a click without jamming. Allows you to release and lock cameras, smartphones, monitors, and lights in a second instead of screwing, greatly save your time
- Safer & Faster: SmallRig quick release plate features dual locking structure inside the baseplate, provides high load capacity of 5 kg. The quick release top plate can buckle vertically and stably into the baseplate, causing not deflection. Vertical installation is faster and solid than traditional slide-in installation
- Durable & Reliable: The quick release camera mount made of Aluminum alloy, only 37g, mini size and super lightweight, sturdy and durable for a long use. Maximum dynamic load capacity of 5 kg, supports most devices in the market. With built-in rubber pads, protect against deflection and scratches
- Patented HawkLock QR Ecosystem: To improve your usage experience, we've released a convenient HawkLock ecosystem of well-designed and high-quality quick release accessories, such as QR Plate kit 3513, Cold Shoe Monitor Mount 3514, Magic Arm 3515, NATO Monitor Mount 3601, QR Top Plate 3730, QR Baseplate 3731, Ball Head 3600
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 1.00 x 1.18 x 1.09 Inches | Weight: 0.08 Pounds
Warranty: 2-Year Warranty (1-Year for Electronic Products)
See On Amazon #17
SmallRig 5.5 Inches Adjustable Friction Articulating Magic Arm, with Both 1/4" Screw for LCD Monitor/LED Lights - 2065B
Asin: B076KDD8MY | Model: 4332298911 | PartNumber: 4332298911 | Ean: 6941590001760
【Wide Compatibility】With 1/4" Thread On Both Ends To Install Any On-Camera Flashlights, Microphone, Lcd Monitor, Dv Monitor, Microphone On One End, And Other Accessories Like A Cage, Handle, Plates.
【What You Get】1 X 5.5 Inches Articulating Arm 2065; Best Weight Load 1.5 Kg/3.3Lb..
【Rubber Padding】The Built-In Rubber Cushion Ring Could Prevent Scratches On The Monitor And Help To Lock The Monitor Tighter..
【Get Perfect Angle】Double 360 Degrees Ball Head Articulating Design Adjusts Any Angles Based On Your Needs..
Features
- Multifunctional Magic Arm The precise and durable designed Articulating Magic Friction Arm provides great versatility for the positioning of access.
- Get Perfect Angle Double 360 degrees Ball Head Articulating design adjusts any angles based on your needs.
- Wide Compatibility With 1/4 thread on both ends to install any on-camera flashlights, microphone, LCD monitor, DV Monitor, microphone on one end, and other accessories like a cage, handle, plates
- Rubber Padding The built-in rubber cushion ring could prevent scratches on the monitor and help to lock the monitor tighter.
- What You Get 1 x 5.5 inches Articulating Arm 2065; Best weight load 1.5 kg/3.3lb.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 0.98 x 3.39 x 2.36 Inches | Weight: 0.37 Pounds
See On Amazon #18
SMALLRIG Magnetic Adapter Mount for DJI Action 4 / Action 3 / Action 2, with Adapter Connection and 1/4 Thread for Osmo Action 3 / Action 2, for Tripod, Selfie, Vlogging, YouTube - 3662
Asin: B09PYR5583 | Model: 3662-SR | PartNumber: 3662-SR
【Foldable Adapter & 1/4''-20 Threaded Hole】The Mount Features One 1/4''-20 Threaded Hole And Foldable Connector At The Bottom That Support Tripods, Or Extension Arm Such As Smallrig 1138 And Smallrig 2066, Selfie Sticks, Suction Cups, As Well As Action Camera Accessory/System.
【Other Related Accessories For Dji Action 2】Smallrig Mount Adapter 3663; Smallrig Cage 3711; Smallrig Filter For Action Camera 3694; Storage Box 3702.
【Please Note】1. Please Note The Direction Of Magnetic Poles When Attaching Action 2 Or Camera Cage; 2. Please First Ensure Stable Connection Before Attaching Tripods, Selfie Sticks, Etc.; 3. Please Do Not Use The Mount In Seawater As It Is Not Water-Proof Or Acid And Corrosion-Resistant.
【Durable Aluminum Construction】Weights Only 28G/1Oz, Smallrig 3662 Features A Solid And Reliable Aluminum Alloy Structure, Stable And Durable To Use When Shooting.
【Mounts Via Magnets】The Mount 3662 Snaps Onto The Action 3 / Action 2 Or Smallrig Aluminum Camera Cage 3711 For Dji Action 3 / Action 2 Using Internal Magnets, Allowing You To Quickly Mount Or Remove The Camera At Any Time..
Features
- Designed for DJI Action 4 / 3 / 2 Camera This Magnetic Adapter Mount is espically designed for DJI Action 4 / Action 3 / Action 2 Camera, which provides a base to quickly connect your camera on to tripod / super clamp directly for multi-angle shooting. It could be used not only with Action 3 / Action 2 camera, but also with SmallRig 3711 for extension usage
- Mounts via Magnets The mount 3662 snaps onto the Action 3 / Action 2 or SmallRig aluminum camera cage 3711 for DJI Action 3 / Action 2 using internal magnets, allowing you to quickly mount or remove the camera at any time.
- Foldable Adapter & 1/4''-20 Threaded Hole The mount features one 1/4''-20 threaded hole and foldable connector at the bottom that support tripods, or extension arm such as SmallRig 1138 and SmallRig 2066, selfie sticks, suction cups, as well as action camera accessory/system
- Durable Aluminum Construction Weights only 28g/1oz, SmallRig 3662 features a solid and reliable aluminum alloy structure, stable and durable to use when shooting
- Other Related Accessories for DJI Action 2 SmallRig Mount Adapter 3663; SmallRig Cage 3711; SmallRig Filter for Action Camera 3694; Storage Box 3702
- Please Note 1. Please note the direction of magnetic poles when attaching Action 2 or camera cage; 2. Please first ensure stable connection before attaching tripods, selfie sticks, etc.; 3. Please do not use the mount in seawater as it is not water-proof or acid and corrosion-resistant
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 0.83 x 1.73 x 1.23 inches | Weight: 0.06 Pounds
See On Amazon #19
SMALLRIG Super Clamp(2 Pack) Magic Arm Clamp for DJI Ronin, Camera Monitor, LED Light 2058
Asin: B07PHNRS3N | Model: 2058-CF-FBA-US | PartNumber: 2058-CF-FBA-US | Ean: 6972070624476
☛Multiple Thread Holes☚Comes With 1/4"-20 And 3/8"-16 Thread For Attaching A Variety Of Accessories.
☛Compatible With 15Mm-40Mm Rods☚Smallrig Magic Arm With Clamp 2058 Is Compatible With 15Mm-40Mm Rods, Which Could Be Tightened By Locking Lever.
☛Multiple Using Scene☚Smallrig Camera Super Clamp 2058 Could Be Mounted Onto Anything Like Cameras, Lights, Umbrellas, Hooks, Shelves, Plate Glass, Cross Bars, Even Other Super Clamps Very Stably.
☛Robust And Durable☚The Solid Anti-Rust Stainless Steel And Black Anodized Aluminum Alloy For High Durability, Non-Slip Rubbers On The Inner Side Protects Your Rig And Reduces Scratches.
Features
- Multiple Functions A versatile super camera clamp that can mounts onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other super clamps
- Robust and durable The solid anti-rust stainless steel and black anodized aluminum alloy for high durability, Non-slip rubbers on the inner side protects your rig and reduces scratches
- Multiple Thread Holes Comes with 1/4-20 and 3/8-16 thread for attaching a variety of accessories
- Multiple Using Scene SMALLRIG camera super clamp 2058 could be mounted onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps very stably
- Compatible with 15mm-40mm Rods SMALLRIG magic arm with clamp 2058 is compatible with 15mm-40mm rods, which could be tightened by locking lever
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 1.57 x 4.72 x 3.94 inches | Weight: 0.57 Pounds
See On Amazon #20
SMALLRIG 15mm Long Lens Support Bracket Height Adjustable for DSLR Camera Shoulder Rig (New) - 1087
Asin: B00E3OATAK | Model: Long-Lens-Support | PartNumber: Long-Lens-Support | Ean: 0608113558724, 0686948880944, 4139052103233, 0600928663594 | UPC: 686948880944, 608113558724, 600928663594
There Are Two Rubber Washers To Protect The Finish Off Of Your Lens From Wearing. Gloove/Slot Design, Allow To Use Velcro To Fasten Your Big Lens..
Note: Dual Rod Clamps Please Search "Smallrig 1761" Or Smallrig 1783 Or Smallrig 1784..
Wildely Compatible With Different Lens. The Diameter Range Of Lens Support: 50Mm To 140Mm ; Adjustable In Height..
The Y Shaped Long Lens Support Screws Onto The 15Mm Rod Clamp To The Long Telephone Lens While Shooting..
Features
- This Lens support system is perfect for long lenses and is compatible with any industry-standard 15mm rod system, help to create a more stable, vibration-free platform for shooting.
- The Y shaped long lens support screws onto the 15mm rod clamp to the long telephone lens while shooting.
- There are two rubber washers to protect the finish off of your lens from wearing. Gloove/Slot design, allow to use Velcro to fasten your big lens.
- Wildely compatible with different lens. The diameter range of lens support: 50mm to 140mm ; Adjustable in height.
- NOTE: Dual Rod Clamps Please Search SmallRig 1761 OR SmallRig 1783 OR SmallRig 1784.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 2.99 x 1.30 x 3.94 inches | Weight: 0.31 Pounds
See On Amazon
Looking For Something Else?
Search