DIYmall 16 Bits 16 X WS2812 WS2812B SK6812 5050 RGB LED Ring Lamp Light with Integrated Drivers
Asin: B0C7CD61WZ | Model: 16-Bits | PartNumber: 16-Bits
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Communication Interface: Single-Wire Communication.
Full Color Programmable Led Strip, You Can Set The Led Brightness In The Arduino-Code, And Also You Can Program Each Light Individually.
What You Will Get: 1 X 16 Bits Ws2812 5050 Rgb Led.
Size: Inside Diameter: 3.2Cm, Outside Diameter: 4.5Cm.
Voltage: Dc5v.
Features
- LED Chip:WS2812B
- Voltage: DC5V
- Communication interface: Single-wire communication
- Size: Inside Diameter: 3.2cm, Outside Diameter: 4.5cm
- Full color Programmable LED Strip, You can set the led brightness in the arduino-code, and also you can program each light individually
- What you will get: 1 X 16 Bits WS2812 5050 RGB LED
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
Dimensions: 1.77 x 1.77 x 1.77 inches
Warranty: 1 year.
See On Amazon Similar To DIYmall 16 Bits 16 X
#1
uxcell Reduced Shank Twist Drill Bits 16mm High Speed Steel 6542 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082DCBT6D | Model: a19102500ux0084 | PartNumber: a19102500ux0084
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 16mm / 0.63"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 56mm / 2.2"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell Reduced Shank Twist Drill Bits 16mm High Speed Steel 4341 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D11C6P | Model: a19102500ux0067 | PartNumber: a19102500ux0067
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 16mm / 0.63"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 60mm / 2.36"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
DIYmall 5PCS 16 Bits RGB LED Ring 16 X WS2812 WS2812B 5050 Lamp Light with Integrated Drivers Individually Addressable for Arduino
Asin: B0B2D5QXG5
Communication Interface: Single-Wire Communication.
Package Included: 5Pcs 16 Bits Rgb Led Ring.
Full Color, It Can Emit 256X256x256=16777216 Colors.
Each Pixel Is Individually Addressable.
Features
- LED Chip: WS2812B, Voltage: DC4-7V
- Each pixel is individually addressable
- Communication interface: Single-wire communication
- Full Color, it can emit 256X256X256=16777216 colors
- Package included: 5PCS 16 Bits RGB LED Ring
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
Dimensions: 1.77 x 1.77 x 1.77 inches
See On Amazon #4
Owl Tools 16MM Cobalt Drill Bits (3 Pack - 150mm / 6" Length) M35 Cobalt Drill Bits with Storage Case - Perfect Metric Drill Bits for Metal, Hardened & Stainless Steel, Cast Iron, and More!
Asin: B0CHN6WM9Q | Ean: 0810147650552 | UPC: 810147650552
Plastic Storage Case Included - Incredibly Tough And Durable Plastic Case. Perfect For Keeping Your Cobalt Drill Bits Neatly Organized And Safe..
Lifetime Guarantee - Here At Owl Tools (Usa Based Company) We Only Care About Your Satisfaction. We Try Our Best To Ensure Each Product Is In Perfect Condition Before You Get It, But If Something Is Not Up To Your Satisfaction, Please Contact Us For A Full Refund Or Replacement..
Cobalt Drill Bits Are The Perfect Drill Bits For Metal - As Well As Other Hard Materials Such As Stainless Steel, Hardened Steel, Cast Iron, Bronze, Titanium, And More!.
M35, Fully Ground, 135° Split Point - Our Drill Bits Contain 5% Cobalt, Are Fully Grounded For A Precision Drilling Diameter. 135° Split Point Design Makes It Easier To Drill Repeated Holes In Harder Materials..
Features
- 3 PACK OF 16MM COBALT DRILL BITS - 16MM Diameter with a Flute Length of 78mm and Total length of 150mm
- M35, FULLY GROUND, 135 SPLIT POINT - Our Drill Bits Contain 5% Cobalt, Are Fully Grounded for a Precision Drilling Diameter. 135 Split Point Design Makes it Easier to Drill Repeated Holes in Harder Materials.
- PLASTIC STORAGE CASE INCLUDED - Incredibly Tough and Durable Plastic Case. Perfect for Keeping Your Cobalt Drill Bits Neatly Organized and Safe.
- COBALT DRILL BITS ARE THE PERFECT DRILL BITS FOR METAL - As well as other hard materials such as Stainless Steel, Hardened Steel, Cast Iron, Bronze, Titanium, and More!
- LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
- See more on Amazon...
Brand: Owl Tools | Manufacturer: Owl Tools
See On Amazon #5
DIYmalls 0.96" inch OLED Display Screen Module I2C IIC 128x64 S S - D - 1306 3.3V-5V Yellow+Blue for Arduino 2560 Nano ESP8266 ESP32 (Pack of 3)
Asin: B0CCJ41HSK
- This Is A "Monochrome" Screen With Yellow Leds On The Top 1/4, And Blue Leds On The Bottom 3/4 Of The Screen. You Cannot Control These Colors. They Are Fixed. But This Is Useful When You Want To Have A Heading In Yellow, And Then Data Displayed Below In Blue..
-Comes With 3X 0.96 Oled With Pin Headers Already Soldered On, So No Soldering Required..
-You Get A Full 128X64 Pixels, But There's A Gap Separating The Yellow Section And The Blue. So You Get 128X16 Yellow Pixels At The Top, And 128X48 Pixels Below It, All Usable, With Both Parts Separated By A Gap Approximately Equivalent To The Width Of 2 Pixels..
-The Actual (7-Bit) I2c Address Of Oled Is 0X3c, Not 3D, Not The (8-Bit) Address Printed On The Back Of Screen Said 0X78 Or 0X7a. 0X78 Is 0X3c Left-Shifted By 1 Bit, Which Is How I2c Addresses Are Sent On The Bus. You Must Properly Define This Address In Any Sketch, Or You Will Not Get Data Sent To The Display And May Mistake It For Being Doa..
Features
- -0.96 OLED connects easily using I2C over four lines (power, ground, clock, and data) at address 0x3c. The address is changeable with some soldering, but unless you really need to, don't risk it.
- -The actual (7-bit) I2C address of OLED is 0x3C, not 3D, not the (8-bit) address printed on the back of screen said 0x78 or 0x7A. 0x78 is 0x3C left-shifted by 1 bit, which is how i2c addresses are sent on the bus. You must properly define this address in any sketch, or you will not get data sent to the display and may mistake it for being DOA.
- - This is a monochrome screen with yellow LEDs on the top 1/4, and blue LEDs on the bottom 3/4 of the screen. You cannot control these colors. They are fixed. But this is useful when you want to have a heading in yellow, and then data displayed below in blue.
- -You get a full 128x64 pixels, but there's a gap separating the yellow section and the blue. So you get 128x16 yellow pixels at the top, and 128x48 pixels below it, all usable, with both parts separated by a gap approximately equivalent to the width of 2 pixels.
- -Comes with 3x 0.96 oled with pin headers already soldered on, so no soldering required.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Dimensions: 1.97 x 1.18 x 1.18 inches
See On Amazon #6
uxcell Reduced Shank Twist Drill Bits 16mm High Speed Steel 4241 with 10mm Shank for Aluminum Alloy Steel Metal Plastic Wood
Asin: B082C6XS4S | Model: a19102500ux0089 | PartNumber: a19102500ux0089
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Versatile Uses: For Use In A Wide Range Of Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Sharp & Spiral Flutes: Sharp Spiral Flutes Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering High Hardness And Toughness For Wear Resistance. Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant..
Features
- Features: Cutting Edge Diameter : 16mm / 0.63"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 125mm / 4.9"; Total Length : 178mm / 7"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering high hardness and toughness for wear resistance. Black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Sharp & Spiral Flutes: Sharp Spiral flutes provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip.
- Versatile Uses: For use in a wide range of aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #7
LEPEVNEY 16mm Reduced Shank Twist Drill Bit with 10mm Round Shank for Stainless Steel Aluminum Alloy Metal Copper Plastic Wood, Made of High Speed Steel 4341
Asin: B0CPC56DC1
Convenient Design: The Reduced Shank Design Expands The Capacity Of A Portable Drill Chuck And The Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Cutting Edge Diameter : 16Mm; Shank Diameter : 10Mm / 0.39"; Cutting Edge Length: 85Mm / 3.35"; Total Length : 156Mm / 6.14".
Precise Drilling: Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts, Helping You Work More Efficiently And Get Rid Of Glitches Or Scrap..
Wide Range Of Use: Can Be Used In Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials..
Features
- High Durability: Made of tungsten steel material for anti-bending and anti-fracture durability, ensuring long-lasting use. Black & Gold Oxide Finish enhances lubrication and corrosion resistance, improving the overall performance of the drill bits.
- Wide Range of Use: Can be used in stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials.
- Convenient Design: The reduced shank design expands the capacity of a portable drill chuck and the spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Precise Drilling: Sharp and spiral cutting edge provides neat and smooth cuts, helping you work more efficiently and get rid of glitches or scrap.
- Cutting Edge Diameter : 16mm; Shank Diameter : 10mm / 0.39; Cutting Edge Length: 85mm / 3.35; Total Length : 156mm / 6.14
- See more on Amazon...
Brand: LEPEVNEY | Manufacturer: LEPEVNEY
See On Amazon #8
DIYmall NiceMCU-C3F V1.0 ESP32-C3 WiFi+Blue-Tooth Development Board, 4MB Flash 32-bit RISC-V Single-core Processor for IoT Smart Home (Pack of 3)
Asin: B0BN1CHKWJ
Built-In 4Mb Spi Flash Byte, 400 Kb Of Sram (16 Kb For Cache) And 384 Kb Of Rom On The Chip.
What You Will Get: 3 X Nicemcu-C3f V1.0 Esp32-C3 Development Board.
Application:Smart Home,Industrial Automation,Health Care,Consumer Electronics,Smart Agriculture,Audio Devices,Generic Low-Power Iot Sensor Hubs,Generic Low-Power Iot Data Loggers.
32-Bit Risc-V Single-Core Processor With A Four-Stage Pipeline That Operates At Up To 160 Mhz.
Features
- ESP32-C3 is a single-core Wi-Fi and BT 5 (LE) microcontroller SoC, based on the open-source RISC-V architecture
- 32-bit RISC-V single-core processor with a four-stage pipeline that operates at up to 160 MHz
- Built-in 4MB SPI flash byte, 400 KB of SRAM (16 KB for cache) and 384 KB of ROM on the chip
- Application:Smart Home,Industrial Automation,Health Care,Consumer Electronics,Smart Agriculture,Audio Devices,Generic Low-power IoT Sensor Hubs,Generic Low-power IoT Data Loggers
- What you will get: 3 X NiceMCU-C3F V1.0 ESP32-C3 Development Board
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
Warranty: Yes
See On Amazon #9
Roman Carbide DC1891 Carbide Forstner Bit, 16mm
Asin: B00CCBHP8K | Model: DC1891 | PartNumber: DC1891 | Ean: 0754001001879 | UPC: 754001001879
Provides Smoother Cutting.
Hard To Find Metric Sizing.
Provides Chatter-Free And Faster Cutting Results.
Features
- Hex shanks will not slip and fit 3/8-inch drill chucks
- Provides chatter-free and faster cutting results
- Provides smoother cutting
- Hard to find metric sizing
- See more on Amazon...
Brand: Roman Carbide | Manufacturer: Woodstock International INC
Dimensions: 3.54 x 0.62 x 0.63 Inches | Weight: 0.15 pounds
See On Amazon #10
MAXTOOL No.16 2pcs Identical Jobber Length Drills 0.177" HSS M35 Cobalt Twist Drill Bits Wire Gauge Gage Numbered Straight Shank Drills; JBN35G10R16P2
Asin: B085GLG477 | Model: JBN35G10R16P2 | PartNumber: JBN35G10R16P2 | Ean: 0634301939259 | UPC: 634301939259
Fully Ground Process Ensures Excellent Chips Moving, And 135 Deg Chisel Angle With Split Point Provide Accuracy Start For Quick Penetration Without Walking And Less Logging.
Jobber Length Twist Drill Bits With Straight Shank For Cutting Metal, Plastic, And Wood Etc; No. 1 To No. 60 Are Available.
Precision Treatment Makes Drills Durable Toughness, Withstands Heavy Duty Operation, Resists Corrosion And Lubricates The Drill Bits Better For Cutting Smoothly.
All Drill Dimensional & Tolerances Conform To Asme/Ansi B94.11M Drill Standards Or Uscti - United States Cutting Tool Institute (Formerly Mcti).
Features
- Cobalt high speed steel ensures the bits super hard, sharp and cutting effectively with impressive performance in cutting metal, plastic, and wood etc with long tool life
- All drill dimensional & tolerances conform to ASME/ANSI B94.11M drill standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging
- Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly
- Jobber Length Twist Drill Bits with Straight Shank for cutting metal, plastic, and wood etc; No. 1 to No. 60 are available
- See more on Amazon...
Brand: MaxTool | Manufacturer: TianShun Tool
Dimensions: 0.18 x 3.42 x 0.18 inches | Weight: 46.00 Grams
See On Amazon
Looking For Something Else?
Search