3 Axes GRBL Control Board USB Plug in Interface GRBL 1.1F 3 Axes Engraving Machine Control Board
Asin: B0C7FTVZ2Q | Model: Schimergot2497hw1 | PartNumber: Schimergot2497hw1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Offline Identification: The Engraving Machine Control Board Uses Integrated Imported Stepper Motor Drive, Integrated Heat Dissipation Aluminum Alloy, Add Offline Identification, Can Be Plugged Into Offline Module And Computer At The Same Time..
Over Current Protection: Grbl Engraver Control Board Has Over Current Protection And Short Circuit Protection With 2A High Current. Case Protection While Avoiding Short Circuit And Fan Active Heat Dissipation..
Offline Laser Engraving: The Engraver Control Board Adopts Grbl1.1F Firmware For Stable Performance And Offline Module For Offline Tool Setting And Engraving..
Adjustable Power: The Laser Of The Engraver Control Board Supports Pwm Or Ttl Signal Control, With Adjustable Power Between 0-100 Percent. Spindle Supports Pwm Power 0-100 Percent Adjustable. Enhanced Spindle Drive Can Support 20000Rpm..
Features
- Plug in USB Interface: The spindle drive of the engraving machine control board adds optocoupler isolation to make the control board generate less heat, spindle speed adjustment is more linear and safer, and the USB interface is plug in.
- Adjustable Power: The laser of the engraver control board supports PWM or TTL signal control, with adjustable power between 0-100 percent. Spindle supports PWM power 0-100 percent adjustable. Enhanced spindle drive can support 20000rpm.
- Offline Identification: The engraving machine control board uses integrated imported stepper motor drive, integrated heat dissipation aluminum alloy, add offline identification, can be plugged into offline module and computer at the same time.
- Offline Laser Engraving: The engraver control board adopts GRBL1.1f firmware for stable performance and offline module for offline tool setting and engraving.
- Over Current Protection: GRBL engraver control board has over current protection and short circuit protection with 2A high current. Case protection while avoiding short circuit and fan active heat dissipation.
- See more on Amazon...
Brand: Schimer | Manufacturer: Schimer
See On Amazon Similar To 3 Axes GRBL Control Board
#1
BIGTREETECH SKR Pico V1.0 Controller Board Perfectly Compatible with Voron V0.1 3D Printer, Fits for Raspberry-Pi Using Klipper Firmware, Entry-Level 4-axis DIY Motherboard
Asin: B09MVJ5XKH | Model: KINGPRINTER-1060000513 | PartNumber: KINGPRINTER-1060000513
✨Chip Capacitors (Mlcc) Of The Main Control Board Are All Murata Capacitors; Well-Known Brand Capacitors, With Guaranteed Quality And Better Experience..
✨Id Design Is Newly Upgraded. It Adopts The Raspberry-Pi Board Frame, Which Is Perfectly Installation With Rasberry-Pi To Save Internal Space. The Appearance And Performance Coexist. It Is The Coolest Choice For Voron Players..
✨Fuse Adopts The Form Of "Fuse Holder + Fuse", Which Is Easy To Disassemble; The Lateral Design Of The Main Control Board Seat Perfectly Matches The Space Characteristics Of Voron V0 Machine That Needs To Fix The Main Board Vertically..
✨Bigtreetech Skr Pico V1.0 Main Control Board Heat Sink Design Is Newly Upgraded, The Heat Dissipation Area Is Enlarged, And The Heat Dissipation Performance Is Greatly Improved, Which Is Both Beautiful And Practical..
Features
- Using Raspberry-Pi ARM Cortex-M0+ main control RP2040 microprocessor. This controller board onboard UART mode of TMC2209 and supports Klipper firmware.
- BIGTREETECH SKR Pico V1.0 main control board heat sink design is newly upgraded, the heat dissipation area is enlarged, and the heat dissipation performance is greatly improved, which is both beautiful and practical.
- Chip capacitors (MLCC) of the main control board are all Murata capacitors; well-known brand capacitors, with guaranteed quality and better experience.
- Fuse adopts the form of fuse holder + fuse, which is easy to disassemble; the lateral design of the main control board seat perfectly matches the space characteristics of Voron V0 machine that needs to fix the main board vertically.
- ID design is newly upgraded. It adopts the Raspberry-Pi board frame, which is perfectly installation with Rasberry-Pi to save internal space. The appearance and performance coexist. It is the coolest choice for Voron players.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #2
3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black
Asin: B072N4FMRN | Model: LKB02 | PartNumber: LKB02 | Ean: 8414771507439
★ Premium Quality ★ Each Part Of This Logrunner 3D Printer Conk Kit Was Made Of Premium Material. These Components Can Be Used In A Wide Range Of Application..
★ Good After-Sales Service. We'll Respond Within 24 Hours For Any Questions..
★ Drv8825 Stepper Motor Driver With Heat Sinks ★ High Quality Stepper Motor Drive With 4 Aluminum Cooler, Running Within 2.5A Current (Maximum), Compatible With For Arduinoide Software And Hardware..
★ Professional 3D Printer Cnc Kit ★ This Is A Professional 3D Printer Diy Kit With Multiple Types Of Modules Or Components You Need. It Is A Great Assortment Set For Starters And Professionals..
Features
- Latest CNC Shield Expansion Board V3.0 -CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
- Professional 3D printer CNC Kit This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
- Premium Quality Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
- DRV8825 Stepper Motor Driver with Heat Sinks High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
- Good after-sales service. We'll respond within 24 hours for any questions.
- See more on Amazon...
Brand: Longruner | Manufacturer: Longruner
Dimensions: 0.04 x 0.04 x 0.04 inches | Weight: 0.84 pounds
See On Amazon #3
ARM 32-bit 4 Axis GRBL 1.1f Type-C Port CNC Engraving Machine Control Board,Optocoupler Isolation,CNC Router Engraver Milling Machine GRBL Control
Asin: B09SZDTBHS | Model: 4A | PartNumber: 4A
Tri-Axis Software Support:Candle/Lasergrbl/Lightburn/Usg. Quad-Axis Software Support:Window/Linux/Mac.
Use Type-C Usb Interface, More Convenient To Use And More Stable Data Transmission.
Support External Driver, External Driver Reserved Interface With The Market High-Power Driver Consistent, Convenient Wiring.
Supply Voltage：Dc24v- 5A.Reserved 24V, 12V, 5V Power Output Port, Convenient To Expand Various Functions.
Features
- 4-Axis 3.0,GRBL 1.1f control board
- Supply Voltage DC24V- 5A.Reserved 24V, 12V, 5V power output port, convenient to expand various functions
- Tri-axis software support:Candle/LaserGRBL/LightBurn/USG. Quad-axis software support:Window/Linux/Mac
- Support external driver, external driver reserved interface with the market high-power driver consistent, convenient wiring
- Use Type-C USB interface, more convenient to use and more stable data transmission
- See more on Amazon...
Brand: ANNOY TOOLS | Manufacturer: ANNOY TOOLS
See On Amazon #4
Genmitsu CNC MDF GRID Spoilboard for 3018 CNC Router Machine, Compatible with 3018-PRO/ 3018-PROVer/ 3018PROVer Mach3, 300 x 180 x 12mm (11-4/5''x 7''x 1/2''), M6 Holes (6mm), Screws and Nuts Included
Asin: B099F27KX1 | Model: 259405790 | PartNumber: 259405790 | Ean: 0816550024997 | UPC: 816550024997
Material: Mdf (Medium-Density Fibreboard). Mdf Is Very Dense Translating Into More Weight With Enhanced Strength And Durability. Size Is 300 X 180 X 12Mm (11.81X 7.09X 0.47 In)..
Application: A Spoilboard Is A Disposable Workbench Mounted Above The Router’S Table. Usually Used When Cutting Or Carving Wooden Materials.The Mdf Spoilboard Is Used As A Base To Cut On So That Your Cnc Table Is Not Damaged By The Cutting Tools. It Can Ensure The Stability Of The Cutting Material, Thereby Achieving More Precise Cutting..
Compatibility: This Spoilboard Is Compatible With Most 3018 Series Router Machines On The Market, Including 3018-Pro, 3018-Prover, 3018-Prover Mach3 And 3018-Mx3 (Note: It Isn't Compatible With 3018-Prover V2). You Can Easily Install The Spoilboard On The Machine According To The Easy-To-Understand Installation Guide..
Scale Grid: The Front Of The Board Is Printed With A Scale Grid In Centimeters. This Makes The Fixed Position Of The Engraving Material Clear And Accurate..
Features
- Flexible Configuration: The hole distribution on this spoilboard has been redesigned to fit the mini size clamps. 24 holes in total, and each hole is 6mm (0.24 in) apart. No need to worry about mounting clamps being too far apart
- Scale Grid: The front of the board is printed with a scale grid in centimeters. This makes the fixed position of the engraving material clear and accurate.
- Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 300 x 180 x 12mm (11.81x 7.09x 0.47 in).
- Compatibility: This spoilboard is compatible with most 3018 series router machines on the market, including 3018-PRO, 3018-PROVer, 3018-PROVer Mach3 and 3018-MX3 (Note: it isn't compatible with 3018-PROVer V2). You can easily install the spoilboard on the machine according to the easy-to-understand installation guide.
- Application: A spoilboard is a disposable workbench mounted above the router s table. Usually used when cutting or carving wooden materials.The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #5
NEJE Max 4 E80 20w 3D Laser Engraver and Cutter for Wood/MDF/Plywood/Acrylic/Metal/Glass/Stainless Steel/Leather/Fabric/Stone/Cardboard/Photos, Large Area Engraving Cutting CNC Machine
Asin: B0BXN81J24 | Model: NEJE Max 4 | PartNumber: NEJE Max 4
【Large Working Area & High Mechanical Precision】Adopting Higher Hardness Aluminum Alloy And Perfect Motion Structure Design, All Structures And Tracks Are Precisely Calibrated By Cnc Industrial Mother Machine, Excellent Vibration Suppression Design, Motion & Focus Control Accuracy Up To 0.01Mm, Motion Speed Up To 400Mm/S. Innovative Y-Axis Belt Adjuster, Making The Image Quality And Accuracy Perfect. Working Area: 750(X)*460(Y)*45(Z)Mm(29.52*18.11*1.77").
【Professional Team & Reliable After-Sales】Neje Is The Original Manufacturer Of Modules And Laser Engraving Machines With 10 Years' Experience, We Can Provide Replacement Support Service For All Accessories. 2 Years After-Sales Guarantee, Accessories Are Only Exchangeable And Not Repairable. If There Is Any After-Sales Problem, Please Contact Our After-Sales Team, We Will Provide You With Professional Support In Time..
【Compatibility & Safety Protection】Support Lightburn/Lasergrbl Software To Work Jointly With Neje Software System For Wireless Creation. Support Ota Software And Firmware Permanent Upgrade, Neje Laser Has Extremely Small Cutting Volume And Multi-Layer Efficient Cutting Mode To Avoid The Risk Of Causing Fire. Built-In Mems Vibration Protection, Emergency Stop Extension, Flame Detection Extension, Safety Door Extension And Other Functions. The Laser Is Equipped With A Protective Shield To Minimize The Spillage Of Optical Radiation, And The Automatic Smoke Exhaust Control And Protective Box Body Can Efficiently Discharge Exhaust Gas..
【High Performance 20W Laser Module】E80 Is The Industry's First 20W Laser Module To Utilize Native Top Quality Diodes And Matrix Optical Compression Technology. With Engraving And Cutting Performance Beyond The Same Type Of Higher Power 20-40W Laser Module. Can Cut 12Mm Wood Board, 0.15Mm Stainless Steel Plate, 10Mm Acrylic Material In One Cut, Very Suitable For Thick Wood Board / Mdf Board / Hdf / Cardboard / Acrylic / Textiles / Metal / Stone Engraving And Cutting..
Features
- Industry's First Motorized Z-axis NEJE Max 4 laser engraving machine adds a new high-precision motorized Z-axis, the industry's first three-axis with lightburn and laserGRBL, freeing both hands without focusing, 3D relief, multi-layer engraving of special-shaped materials, curved surface engraving, multi-layer high-efficiency and safe cutting, supports the blade, drawing pen, metal tip to expand drawing, cutting and engraving and other functions. (The package comes with a drawing pen, metal tip is NOT included.)
- High Performance 20W Laser Module E80 is the industry's first 20W laser module to utilize native top quality diodes and matrix optical compression technology. With engraving and cutting performance beyond the same type of higher power 20-40W laser module. Can cut 12mm wood board, 0.15mm stainless steel plate, 10mm acrylic material in one cut, very suitable for thick wood board / MDF board / HDF / cardboard / acrylic / textiles / metal / stone engraving and cutting.
- Large Working Area & High Mechanical Precision Adopting higher hardness aluminum alloy and perfect motion structure design, all structures and tracks are precisely calibrated by CNC industrial mother machine, excellent vibration suppression design, motion & focus control accuracy up to 0.01mm, motion speed up to 400mm/s. Innovative Y-axis belt adjuster, making the image quality and accuracy perfect. Working area: 750(X)*460(Y)*45(Z)mm(29.52*18.11*1.77)
- Compatibility & Safety Protection Support Lightburn/LaserGRBL software to work jointly with NEJE software system for wireless creation. Support OTA software and firmware permanent upgrade, NEJE laser has extremely small cutting volume and multi-layer efficient cutting mode to avoid the risk of causing fire. Built-in MEMS vibration protection, emergency stop extension, flame detection extension, safety door extension and other functions. The laser is equipped with a protective shield to minimize the spillage of optical radiation, and the automatic smoke exhaust control and protective box body can efficiently discharge exhaust gas.
- Professional Team & Reliable After-sales NEJE is the original manufacturer of modules and laser engraving machines with 10 years' experience, we can provide replacement support service for all accessories. 2 years after-sales guarantee, accessories are only exchangeable and not repairable. If there is any after-sales problem, please contact our after-sales team, we will provide you with professional support in time.
- See more on Amazon...
Brand: NEJE | Manufacturer: NEJE
Dimensions: 2.00 x 37.00 x 21.60 inches
Warranty: 2 year
See On Amazon #6
6 Axis 125KHz NVCM USB Mach3 Stepper Motor Motion Control Card Breakout Board USB interface CNC Controller Board 12-32VDC for Servo Motor
Asin: B07C5KH4HB | Model: NVCM | PartNumber: NVCM | Ean: 0785004502919 | UPC: 785004502919
♞【Max 6 Axis Control】Can Support 6 Axis Stepper Systems Maxisim,125Khz Pulse Output For Every Axis.
♞【Multifunction】 Power Supply Interface, Usb Connection Interface, Stepper/Servo Control Output Interface, Spindle Control Output Interface, Estop And Limited Switch And Tool Setting Input Interface And So On..
♞【Pwm Output】1 Port 0-10V Spindle Speed Analog Output Interface(Can Change To Pwm Output);.
♞【Dc Power Supply Input】Main Device Is 24V-32V Dc Power Supply Input,Current Should Higher Than 1A;.
Features
- Support software This NVCM card support Mach3 software, through USB port to communicate with computer.
- DC power supply input main device is 24V-32V DC power supply input,current should higher than 1A;
- Max 6 Axis Control Can support 6 axis stepper systems maxisim,125KHz pulse output for every axis
- PWM output 1 port 0-10V spindle speed analog output interface(can change to PWM output);
- Multifunction Power supply interface, USB connection interface, Stepper/Servo control output interface, spindle control output interface, Estop and limited switch and tool setting input interface and so on.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #7
RATTMMOTOR CNC Controller Board 3 Axis GRBL USB Port CNC Router Engraving Machine Control Board for DIY Mini CNC Wood Router Machine CNC 1310, 1610 PRO, 3018 PRO, 3018 PRO-MAX
Asin: B08BNVBLJR | Model: CNC 1310 | PartNumber: CNC 1310 | Ean: 0619191200603 | UPC: 619191200603
【Mutiple Functions】Maximum Support For 20000Rpm Spindle, Support 0.5W-20W Module, Support Tool Setting(Probe) , Support Grbl Offline Controller. Equipped With Silent Fan, Good Cooling Effect..
【X/Y/Z/A Axis Limit Switch Function】Added X/Y/Z Axis Limit Switch, When The Engraving Machine Moves Up And Down Or Left And Right, It Will Stop Immediately If It Exceeds The Forming Range..
【Power Switch Button Function】Added The Power Switch Button, Simple Operation, More Safety In The Process Of Using The Machine..
【4 Axis Engraving】 Upgraded From X/Y/Z Axis To X/Y/Z/A Axis, Support 4-Axis Engraving..
【Support System】Windows Xp / Win 7 / Win 8 / Win 10 (32/64 )/ Linux. Support Stepper Motor:12V, Maximum Current Of 2A Or Less,Is Recommended Within 1.5A And Additional Heat (Any Nema17 Or Nema23 Stepper Motor). Spindle Pwm Speed: Support..
Features
- Basic Parameters Connection:USB (USB-CH340), Input voltage:12-24VDC (recommend 24VDC), Power Interface:5.5-2.5mm DC interface, Control software:GRBL control/ Lite.fire.
- Support system Windows XP / Win 7 / Win 8 / Win 10 (32/64 )/ Linux. Support Stepper motor:12V, maximum current of 2A or less,is recommended within 1.5A and additional heat (any nema17 or nema23 stepper motor). Spindle PWM speed: Support.
- Mutiple Functions Maximum support for 20000RPM spindle, Support 0.5W-20W module, Support tool setting(probe) , Support GRBL offline controller. Equipped with silent fan, good cooling effect.
- 4 Axis Engraving Upgraded from X/Y/Z axis to X/Y/Z/A axis, support 4-axis engraving.
- X/Y/Z/A axis Limit Switch Function Added X/Y/Z axis limit switch, when the engraving machine moves up and down or left and right, it will stop immediately if it exceeds the forming range.
- Power Switch Button Function Added the power switch button, simple operation, more safety in the process of using the machine.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #8
RATTMMOTOR 4 Axis CNC USB Mach3 Controller Breakout Board CNC Motion Controller Card Stepper Motor Driver with Cable for CNC Router Engraving Machine, Servo Motor, Stepper Motor
Asin: B07ZT7RGY9 | Ean: 0769135849686 | UPC: 769135849686
Signal Output:0-10V, It Can Control The Spindle Motor Speed Through Using Mach3 Software..
Recommends That Users Install The Emergency Stop Button And Make Sure The Button Is Functioning Properly..
If You Are Not Familiar With The Product And Software Features, Make Sure The Machine's Power Switch On Hand, You Can Quickly Turn Off The Power..
This Usb Motion Card Does Not Need Install Any Usb Driver, Windows2000/Xp/Windows7,Can Directly Identify (Notice: Doesn't Support Win8/Win10/Macos System !!!) ..
Features
- Model Name: Mach3 USB Motion Card; 4-axis linkage, Maximum step-pulse frequency: 100KHz, support connect four stepper motor drives or servo drives.
- This USB motion card does not need install any USB driver, Windows2000/XP/Windows7,can directly identify (Notice: Doesn't support Win8/win10/macOS system !!!) .
- Signal Output:0-10V, it can control the spindle motor speed through using mach3 software.
- If you are not familiar with the product and software features, make sure the machine's power switch on hand, you can quickly turn off the power.
- Recommends that users install the emergency stop button and make sure the button is functioning properly.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: JingDiao
See On Amazon #9
SainSmart Genmitsu GRBL Controller Board for CNC Router Machine 3018-PROVer/ 3018-PROVer Mach3/ 3018-MX3
Asin: B0834THBLC | Ean: 0816550023143 | UPC: 816550023143
Usb Interface Communication, Support 3-Axis Engraving, And Laser Module..
All Control Signals Are Isolated By Optocoupler And Have Strong Anti-Interference Ability.
Input Interface: X Y Z Limit (Home) Interface, Z-Axis Tool Return To Zero, Emergency Stop Switch Interface, Grbl Offline Controller Interface..
Applicable Software: Grblcontrol (Candle), Lasergrbl, And Other Software That Supports Grbl Firmware, Grbl Firmware Version V1.1F..
Features
- This controller board is compatible with Genmitsu CNC 3018-PROVer. If you have already had the Genmitsu CNC Router 3018-MX3/ 3018-PROVer Mach3, this controller board can help you turn Mach3 control to GRBL control.
- Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1f.
- USB interface communication, support 3-axis engraving, and laser module.
- Input interface: X Y Z limit (HOME) interface, Z-axis tool return to zero, emergency stop switch interface, GRBL offline controller interface.
- All control signals are isolated by optocoupler and have strong Anti-interference ability
- See more on Amazon...
Brand: SainSmart | Manufacturer: SainSmart
See On Amazon #10
CNCTOPBAOS 3 Axis GRBL 1.1f USB Port CNC Engraving Machine Control Board CNC Router Engraver Milling Machine Controller Board
Asin: B07B3RFNJ7 | Model: 4V | PartNumber: 4V | Ean: 0785004502766 | UPC: 785004502766
♞【Support Motor】Support Xyz Three-Axis Control, Spindle.Support Stepper Motor: 12V, Maximum Current Of 2A Or Less Is Recommended Within 1.5A And Additional Heat. (Any Stepper Motor Nema17,Nema23);Support Spindle: Support 24Vdc Spindle Pwm Speed (0%-100%),Also Support 3-Pin Pwm/Ttl Signal Control Module.
♞【Applications】 The Control Board Can Be Used With The 1310,1610-Pro, 3018,3018-Pro And 3018-Pro Max Etc Engraving Machines..
♞【New Functions】Add 2-Pin Emergency Stop Button Port,Probe Port,Xyz Limit Port And Add The Power Button Switch..
♞【Support Software】Grbl Contol/Candle(3 Axis)/Universal Gcode Sender; Support System: Windows Xp/7/8/10.
Features
- Model Upgraded 3 Axis GRBL 1.1F USB Port GRBL Control Board; Input voltage: 24VDC
- Support software GRBL Contol/Candle(3 axis)/Universal Gcode Sender; Support System: Windows XP/7/8/10
- Support Motor Support XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17,Nema23);Support spindle: Support 24VDC Spindle PWM speed (0%-100%),also support 3-pin PWM/TTL signal control module
- New functions Add 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch.
- Applications The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO MAX etc engraving machines.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Weight: 0.15 Kilograms
See On Amazon #11
EMVANV 3 Axis GRBL 1.1f USB Port CNC Engraving Machine Control Board for CNC 3018 Pro 3018 Max 3018Pro-M Milling Machine
Asin: B0C28541XF | Model: 16812899182314 | PartNumber: 16812899182314
Simple And Convenient: Directly Into The Picture Engraving, No Programming, No Design, Simple And Convenient.
Heat Dissipation: Professional Shell Protection, Fan Active Heat Dissipation, Long Time No Heat.
Stable: Grbl 1.1 Firmware, Stable Performance.
Offline Sculpting: Offline Sculpting (Optional Offline Module), Offline Tool Settings, Sculpting.
Features
- Stepper Motor Overcurrent Protection: Avoid damage, upgrade integrated stepper motor drive, 2A large current, high stability
- Offline Sculpting: Offline sculpting (optional offline module), offline tool settings, sculpting
- Simple and Convenient: Directly into the picture engraving, no programming, no design, simple and convenient
- Stable: GRBL 1.1 firmware, stable performance
- Heat Dissipation: Professional shell protection, fan active heat dissipation, long time no heat
- See more on Amazon...
Brand: EMVANV | Manufacturer: EMVANV
Dimensions: 0.16 x 6.30 x 5.91 inches | Weight: 0.33 Pounds
See On Amazon #12
Genmitsu 3040 MDF Spoilboard, work with 3040 Y-Axis Extension Kit, 3018 CNC Upgraded Accessories Compatible with Most 3018, 3018-PRO/ 3018-MX3, 30 x 36 x 1.5cm (11.8'' x 14.1'' x 0.6'')
Asin: B08VN6HXPD | Model: 101-63-MDF3040P | PartNumber: 101-63-MDF3040P | Ean: 0816550024348 | UPC: 816550024348
Easy To Use: The Spoilboard Comes With Pre-Installed Threaded Holes. It’S Easy To Install And Can Be Used With Most Bench Clamping Systems..
Application: Usually Used When Cutting Or Carving Wooden Materials. The Spoilboard Is Used As A Base To Cut On So That Your Cnc Table Is Not Damaged By The Cutting Tools. It Can Ensure The Stability Of The Cutting Material, Thereby Achieving More Precise Cutting..
Material: Mdf(Medium-Density Fibreboard). Mdf Is Very Dense Translating Into More Weight With Enhanced Strength And Durability. Size Is 30 X 36 X 1.5Cm (11.8'' X 14.1'' X 0.6'').
Great Stability: The Flat And Smooth Surface Can Ensure The Stability Of The Cutting Material, Easy To Resurface..
Features
- Compatibility: Perfectly compatible with Genmitsu 3040 extension kit for 3018-PRO & 3018-MX3 series CNC router. Increase rigidity and expand your mounting options.
- Great Stability: The flat and smooth surface can ensure the stability of the cutting material, easy to resurface.
- Easy to Use: The spoilboard comes with pre-installed threaded holes. It s easy to install and can be used with most bench clamping systems.
- Material: MDF(Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 36 x 1.5cm (11.8'' x 14.1'' x 0.6'')
- Application: Usually used when cutting or carving wooden materials. The spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 14.17 x 11.81 x 0.59 inches | Weight: 2.65 Pounds
See On Amazon #13
3 Axis GRBL V1.1f 32-Bit Controller, Dual Y-axis USB Drive Board for Stepper Motor Drive Control-Board Stepper Motor Support Offline for Woodworking Engraving, CNC Router, Las-er Engraving Machine
Asin: B0CM3L7GQQ | Model: 3103033 | PartNumber: 3103033
Versatile Compatibility: The Controller Is Compatible With Various Software Applications That Support Grbl Firmware, Such As Grblcontrol (Candle) And La-Ser Grbl. This Compatibility Allows Users To Choose Their Preferred Software For Controlling The Machine, Providing Flexibility And Convenience..
Wide Range Of Applications: This Controller Is Suitable For Woodworking Engraving Machines, Cnc Routers, And Laser Engraving Machines. Its Versatility Makes It A Valuable Tool For Hobbyists, Diy Enthusiasts, And Professionals Alike, Enabling Them To Create Intricate Designs, Precise Cuts, And Detailed Engravings On Various Materials..
Offline Support: The Stepper Motor Drive Control-Board Supports Offline Operation, Eliminating The Need For A Constant Connection To A Computer. This Feature Allows For Standalone Operation, Making It Easier To Use The Machine In Different Locations Or Without The Need For A Dedicated Computer Setup..
Dual Y-Axis Drive Board: The Included Dual Y-Axis Usb Drive Board Allows For Independent Control Of Two Y-Axis Stepper Motors. This Feature Enables Synchronized And Coordinated Movements, Reducing The Chances Of Misalignment And Ensuring Precise And Symmetrical Engraving Or Cutting..
Features
- Advanced 32-Bit Controller: The 3 Axis GRBL V1.1f 32-Bit Controller features a powerful 32-bit controller, providing enhanced processing capabilities for precise and efficient stepper motor control. This advanced controller ensures smooth and accurate movements, resulting in high-quality woodworking, CNC routing, and laser engraving.
- Dual Y-Axis Drive Board: The included Dual Y-axis USB Drive Board allows for independent control of two Y-axis stepper motors. This feature enables synchronized and coordinated movements, reducing the chances of misalignment and ensuring precise and symmetrical engraving or cutting.
- Versatile Compatibility: The controller is compatible with various software applications that support GRBL firmware, such as Grblcontrol (Candle) and La-ser GRBL. This compatibility allows users to choose their preferred software for controlling the machine, providing flexibility and convenience.
- Offline Support: The Stepper Motor Drive Control-Board supports offline operation, eliminating the need for a constant connection to a computer. This feature allows for standalone operation, making it easier to use the machine in different locations or without the need for a dedicated computer setup.
- Wide Range of Applications: This controller is suitable for woodworking engraving machines, CNC routers, and laser engraving machines. Its versatility makes it a valuable tool for hobbyists, DIY enthusiasts, and professionals alike, enabling them to create intricate designs, precise cuts, and detailed engravings on various materials.
- See more on Amazon...
Brand: HSOKEW | Manufacturer: mescream
See On Amazon #14
SainSmart 5 Axis Breakout Board for Stepper Motor Driver CNC Mill
Asin: B0093Y897A | Model: CECOMINOD047429 | PartNumber: CECOMINOD047429 | Ean: 6955170898404
Relay Output Control Interface, Can Be Accessed By The Spindle Motor Or The Air Pump, Water Pump, Etc.
Five-Axis Job Led Display, Visual Display Products, Working Condition.
The Two-Stage Signal Processing, Signal Transmission Smooth, Powerful Anti-Jamming.
Features
- The maximum matching 5-axis stepper motor driver
- The two-stage signal processing, signal transmission smooth, powerful anti-jamming
- Relay output control interface, can be accessed by the spindle motor or the air pump, water pump, etc
- Five-axis job LED display, visual display products, working condition
- See more on Amazon...
Brand: SainSmart | Manufacturer: Sign Smart (SainSmart)
See On Amazon #15
MYSWEETY CNC Router Machine Control, Offline GRBL Control Module with TFT Touch Screen for CNC 3018/3020/ 3040pro/ 4540 for Metal Cutting Wood Working
Asin: B0CG93TPGR
✅【Wifi Transmission & Sd Card】Files Can Be Transferred From A Computer To The Offline Handheld Controller Via Sd Or Wifi Network..
✅【Convenience】This Offline Control Can Reduce The Load On Your Computer For Long-Term Engraving..
✅【Advanced Use】User-Defined Keys Can Be Defined By Nc Files, Such As Tool Setting Commands And Return To Origin Commands..
✅【Tft Touchscreen】Compared To Lcd Screens, Tft Touchscreens Offer Advantages Such As High Responsiveness, Brightness And Contrast, Making The Display Effects Close To Crt Monitors..
Features
- Compatibility Compatible with 3018, 3018 Max, 3020 Plus and 4540 series CNC engravers.
- TFT Touchscreen Compared to LCD screens, TFT touchscreens offer advantages such as high responsiveness, brightness and contrast, making the display effects close to CRT monitors.
- Wifi Transmission & SD Card Files can be transferred from a computer to the offline handheld controller via SD or Wifi network.
- Advanced Use User-defined keys can be defined by NC files, such as tool setting commands and return to origin commands.
- Convenience This offline control can reduce the load on your computer for long-term engraving.
- See more on Amazon...
Brand: MYSWEETY | Manufacturer: MYSWEETY
See On Amazon #16
SainSmart Genmitsu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO
Asin: B07X3F749R | Model: 816550022382 | PartNumber: 816550022382 | Ean: 0816550022382 | UPC: 816550022382
Stepper Motor Drive: Drv8825; Spindle Power: 150W; Input Voltage: 24V (12-24V)..
Support Stepper Motor: 12V, The Maximum Current Within 2A, Recommended Within 1.5A And Additional Heat. (Any Stepper Motor 42, 57)..
Support Xyz Three-Axis Control, Spindle And Laser Module. Support 3 Pin And 2 Pin Lasers (The 2 Pin Lasers: Please Connect The White Interface " + S-")..
Software: Grbl Controller, Universalgcodesender..
Features
- This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module.
- Software: GRBL controller, UniversalGcodeSender.
- Stepper motor drive: DRV8825; Spindle power: 150W; Input voltage: 24V (12-24V).
- Support XYZ three-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface + s-).
- Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57).
- See more on Amazon...
Brand: SainSmart | Manufacturer: SainSmart
Weight: 6.70 ounces
See On Amazon #17
RATTMMOTOR 3D Printer CNC Controller Kit Compatible with Arduino IDE, Nema17 Stepper Motor+UNO R3 Improvement Borad+CNC GRBL Shield Board V3 Expansion Board+DRV8825 Drivers+Mechanical Switches
Asin: B08KXL4GH7 | Model: 3D-4401J | PartNumber: 3D-4401J | Ean: 0619191755295, 0754193620124 | UPC: 754193620124, 619191755295
【Cnc Shield Board V3 Expansion Board】This Expansion Board Can Be Used As A Drive Expansion Board For Engraving Machines, 3D Printers, Etc..
【Mechanical Switches With 3-Pin Cable】Under Normal Circumstances, The System Needs To Be Equipped With At Least 3 Mechanical Switches;Easy To Install, More Common Styles..
【Drv8825 Stepper Motor Driver】Six Different Stepping Modes: Full, Half, 1/4, 1/8, 1/16, 1/32; The Adjustable Potentiometer Can Adjust The Maximum Current Output, So As To Obtain A Higher Step Rate..
【Uno R3 Improvement Borad】 Uno Is A Simple I/O Platform Based On Open Source Code, And Has A Processing/Wiring Development Environment Similar To Java And C Language, Which Is Easy To Understand, Allowing You To Quickly Use Unc To Make Interesting Things.
Features
- Nema17 Stepper Motor Step angle: 1.8deg; Rated current: 1.7A; Holding torque: 0.45Nm (64 oz.in) ; Size: 40mm; Phase: 2; 1.8 5% step angle (200 steps / rotation)
- UNO R3 Improvement Borad UNO is a Simple I/O platform based on open source code, and has a Processing/Wiring development environment similar to Java and C language, which is easy to understand, allowing you to quickly use UNC to make interesting things
- CNC Shield Board V3 Expansion Board This expansion board can be used as a drive expansion board for engraving machines, 3D printers, etc.
- DRV8825 Stepper Motor Driver Six different stepping modes: full, half, 1/4, 1/8, 1/16, 1/32; The adjustable potentiometer can adjust the maximum current output, so as to obtain a higher step rate.
- Mechanical Switches with 3-pin Cable Under normal circumstances, the system needs to be equipped with at least 3 mechanical switches;easy to install, more common styles.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #18
Doesbot GRBL 1.1 CNC 3-Axis Control Board Support 48V 500W DC Spindle and 12V 60W Laser with Power Switch for DIY Mini Engraving Machine Wood Router CNC 1310, 1610 PRO, 3018 PRO, 3018 PRO-MAX
Asin: B0C625ZCN7 | Model: 3AXIS-RED | PartNumber: 3AXIS-RED | Ean: 0749350422093 | UPC: 749350422093
Support 48V 500W Dc Spindle Motor.
Support Externally Connected High-Power Driver.
Nano 3-Axis Control Board Is A Arduino Nano Based 3-Axises Motion Control System.
Adjustable Driver Subdivision.
Support The Xyz Limit Switch, Probe Interface.
Support 12V, 5V With Ttl And Without Ttl Laser.Maximum 12V 60W.
This Controller Has Burned The Grbl1.1 Firmware.
Input Voltage (Board Power Supply): 12V To 24V, Toggle Switch Control.
Features
- New design by Doesbot in 2023
- Input voltage (board power supply): 12V to 24V, Toggle switch control
- Support 48V 500W DC spindle motor
- Support 12V, 5V with TTL and without TTL laser.Maximum 12v 60w
- Adjustable driver subdivision
- Support the xyz limit switch, probe interface
- Support Externally connected high-power driver
- Nano 3-Axis Control Board is a Arduino Nano based 3-Axises Motion control system
- This controller has burned the grbl1.1 firmware
- See more on Amazon...
Brand: Doesbot | Manufacturer: Doesbot
See On Amazon #19
AnoleX CNC Router Machine Control Board 3 Axis GRBL 1.1h USB Port for 3020-Evo/3030-Evo Pro
Asin: B0C8CMNK19 | Model: MKSK-CNC 7.1 | PartNumber: MKSK-CNC 7.1
Brand: AnoleX | Manufacturer: AnoleX
Dimensions: 1.18 x 5.91 x 3.94 inches
See On Amazon #20
Tangxi 3D Printer CNC Kit with CNC Shield V3.0&A4988 Stepper Motor Driver for UNO for R3 Board&Heatsink&Nema 17 Stepper Motor&USB Cable,CNC Kit for Kuman for UNO for R3
Asin: B07SBDD4HL | Model: Tangxi4yuxk2qzm6 | PartNumber: Tangxi4yuxk2qzm6 | Ean: 0787015747617 | UPC: 787015747617
【17-Stepping Motor】For Nema 17 Model, Holding 26Ncm (36.8Oz.In), 12V / 0.4A And 1.8 Degree Angle (200 Steps / Rev). The Stepper Motor Can Be Connected Or Soldered Into Place With A 4-Pin Connector..
【Product Service】 If You Have Any Problem While Using The Product, Please Let Us Know And We Will Offer You The Best Solution, Thanks For Your Attention..
【Main Material】Made Of Abs + Metal Durable Material, High Quality Stepper Motor Drive Can Use Longer Time. Multiple Types Of Modules Or Components In This Set That Meet Their Different Needs Of Learning Or Experiment..
【Cnc Shield V3.0-Stepper Drive】Adopted The Latest Version 3.0, Compatible With Grbl 0.8C, Supports 4 Axes, Each Axis Has 2 End Stops. Use A Detachable A4988 Set The Microstepping For The Stepper Drive..
Features
- Complete Controller Set There are 1 * CNC Shield V3.0, 1 * for board, 4 * A4988 driver, 1 * USB cable, 1 * Stepping motor and 1* heat sink. Professional replacement your damage controller kits.
- CNC Shield V3.0-Stepper Drive Adopted the latest version 3.0, compatible with GRBL 0.8c, supports 4 axes, each axis has 2 end stops. Use a detachable A4988 set the microstepping for the stepper drive.
- 17-Stepping Motor For Nema 17 model, holding 26Ncm (36.8oz.in), 12V / 0.4A and 1.8 degree angle (200 steps / rev). The stepper motor can be connected or soldered into place with a 4-pin connector.
- Main Material Made of ABS + Metal durable material, high quality stepper motor drive can use longer time. Multiple types of modules or components in this set that meet their different needs of learning or experiment.
- Product service If you have any problem while using the product, please let us know and we will offer you the best solution, thanks for your attention.
- See more on Amazon...
Brand: Tangxi | Manufacturer: PUSOKEI
Dimensions: 3.35 x 5.12 x 3.54 inches
See On Amazon
Looking For Something Else?
Search