Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)
Asin: B0C85C59B3 | Model: 145 | PartNumber: 145 | Ean: 0749102974252 | UPC: 749102974252
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Compact Design Of Lid Stay Hinge - The Compact Design Allows For Installation In Tight Fit Areas. Yirran Lid Hinge Supports Opening The Lid At A Maximum Angle Of 105 Degrees.
Only Takes 10 Minutes To Complete The Installation By Following The Install Placement Measurement Card And Installation Video..
Wide Usage -- Never Worry Again About Having To Prop The Lid Open. This Lid Support Will Hold The Lid Open Until You Are Ready To Close. This Lid Stay Is Deal For Upward Opening Flaps, Such As Toy Boxes And Vanity Lids, Vertical Cabinet Doors And Storage Box, Cabinetry, Piano Or Butt Hinges.
2-Way Installation – Yirran Hinges Can Be Installed On Top Opening Or Upward Opening Doors. Each Lid Hinge Can Be Used For Right Or Left Hand Mounting..
Conditions Of Use - Per Lid Stay Hinge Can Support The Range Of Door Weight 3-10 Lbs, Door Height Range18-19 Inch. Weight Support Will Be Doubled By Using 2 Lid Supports (6Lbs-20Lbs).
Features
- LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
- CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs)
- COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Yirran lid hinge supports opening the lid at a maximum angle of 105 degrees
- 2-WAY INSTALLATION Yirran hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting.
- ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video.
- WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges
- See more on Amazon...
Brand: YIRRAN | Manufacturer: Yirran Ltd
Dimensions: 1.00 x 8.60 x 2.00 inches
See On Amazon Similar To Lid Stay 105 Degree Open
#1
Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)
Asin: B086X64DQT | Model: MODP-145 | PartNumber: MODP-145 | Ean: 0702562332208 | UPC: 702562332208
Lid Stay Slow Closing 🌟 Lid Stay Support Built-In Hydraulic Dampening Device. Doors And Lids Will Come Down Slowly And Softly Which Eliminates Slamming Doors Or Smashed Fingers..
Keep Lid Hinge Stay Opening & Wide Usage 🌟 Updated Manual Can Be Downloaded In Amazon Page.Easy To Follow Installation Instructions Ensure A Perfect Install The First Time! Lid Stay Can Be Installed On The Left Or On The Right..
Compact Design Of Lid Stay Hinge 🌟 The Compact Design Allows For Installation In Tight Fit Areas. The Lid Hinges Supports Opening The Lid At A Maximum Angle Of 105 Degree..
Easy To Install 🌟 Comes With An Exclusive Original Design Installation Card, Combined With The Most Detailed Installation Video Of The Entire Network On This Page, Allows You To Easily Complete The Hinge Installation..
Features
- STURDY LID STAY WITH SOFT CLOSE Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch.
- EASY TO INSTALL Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation.
- LID STAY SLOW CLOSING Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
- COMPACT DESIGN OF LID STAY HINGE The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
- KEEP LID HINGE STAY OPENING & WIDE USAGE Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
- See more on Amazon...
Brand: MORINBO | Manufacturer: MORINBO
Dimensions: 0.60 x 8.60 x 2.10 Inches
See On Amazon #2
Douper 200N Gas Struts Heavy Duty Soft Close Lid Support Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs Pack of 2
Asin: B01M6XXUM1 | Model: DP057-TATAMI | PartNumber: DP057-TATAMI | Ean: 0635133134102 | UPC: 635133134102
Strong Enough -- Douper 200N Heavy Duty Gas Struts Can Support Minimum 20 Lbs And Maximum 30 Lbs Lid And Lower Gently; Weight Support Will Be Doubled With 2 Hinges (40Lbs 60Lbs/ 2Pcs). Of Course, This Is A Theoretical Value, And The Load-Bearing Range Decreases As The Height Of Your Lid Increases..
Warm Tips -- Douper Hinges Will Not Applicable With The Lid At Width More Than 50” And Height Over 25”. And At Least 9 Inches Height Distance Needed For The Side Mount. Hinges Will Not Work If Your Lid Doesn’T Match Specified Dimension And Weight Requirement.
75°-105° Open Angle -- Each Lid Hinge Can Be Used For Right Or Left Hand Mounting, Keep The Hinge Installed For 75°-105° Adjustable Opening Angles, Depending On Actual Situation. Note: No Adjustments On Placement Measurements Of The Hinge Mounted On Side Board..
Holds Lid Open -- These Hinges Will Hold Your Lid Open Until You Push It Down. Never Worry Again About Having To Prop The Lid Open.
Features
- GENTLY CLOSE DESIGN -- Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers
- HOLDS LID OPEN -- These hinges will hold your lid open until you push it down. Never worry again about having to prop the lid open
- STRONG ENOUGH -- Douper 200N heavy duty gas struts can support minimum 20 lbs and maximum 30 lbs lid and lower gently; Weight support will be doubled with 2 hinges (40lbs 60lbs/ 2pcs). Of course, this is a theoretical value, and the load-bearing range decreases as the height of your lid increases.
- 75 -105 OPEN ANGLE -- Each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75 -105 adjustable opening angles, depending on actual situation. Note: NO adjustments on placement measurements of the hinge mounted on side board.
- WARM TIPS -- Douper hinges will not applicable with the lid at width more than 50 and height over 25 . And at least 9 inches height distance needed for the side mount. Hinges will not work if your lid doesn t match specified dimension and weight requirement
- See more on Amazon...
Brand: douper | Manufacturer: Douper
Dimensions: 1.00 x 13.00 x 1.00 inches
See On Amazon #3
Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors Pack of 2
Asin: B07WPL8B8X | Ean: 0723172899974 | UPC: 723172899974
Keep Lid Hinge Stay Opening, Wide Usage -- Never Worry Again About Having To Prop The Lid Open. This Lid Support Will Hold The Lid Open Until You Are Ready To Close. This Lid Stay Is Deal For Upward Opening Flaps, Such As Toy Boxes And Vanity Lids, Vertical Cabinet Doors And Storage Box, Cabinetry..
Easy To Install Lid Support-- Updated Install Instructions Can Be Downloaded In Amazon Page. Easy To Follow Installation Instructions Ensure A Perfect Install The First Time! Lid Stay Can Be Installed On The Left Or On The Right..
Compact Design Of Lid Stay Hinge -- The Compact Design Allows For Installation In Tight Fit Areas. The Lid Hinges Supports Opening The Lid At A Maximum Angle Of 105 Degree..
Lid Stay Slow Closing ---Lid Stay Support Built-In Hydraulic Dampening Device. Doors And Lids Will Come Down Slowly And Softly Which Eliminates Slamming Doors Or Smashed Fingers..
Features
- LID STAY WITH SOFT CLOSE FOR TOY BOX-- The Lid stay is made of nickel plated steel and plastic, and 2 pcs lid-stay support the range of door weight 12-21 lbs, Height 18-19 inch. The hinge will not applicable with the lid at width more than 27 and height over 18 .
- LID STAY SLOW CLOSING ---Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
- KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry.
- COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
- EASY TO INSTALL LID SUPPORT-- Updated install instructions can be downloaded in Amazon page. Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
- See more on Amazon...
Brand: RUYUFE | Manufacturer: RUYUFE
Dimensions: 0.10 x 8.00 x 4.00 inches
See On Amazon #4
Ravaver Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install
Asin: B08B5NWXQ1 | Model: 145 | PartNumber: 145 | Ean: 0702562332499 | UPC: 702562332499
Lid Stay Slow Closing: Lid Stay Support Built-In Hydraulic Dampening Device. Doors Will Come Down Slowly And Softly Which Eliminates Slammed Doors Or Smashed Fingers.
Keep Lid Hinge Stay Open & Wide Usage: Easy To Follow Install Instructions Ensure A Perfect Install The First Time! Lid Stay Can Be Installed On The Left Or On The Right.
Compact Design Of Lid Stay Hinge Allows For Installation In Tight Fit Areas. The Lid Hinges Supports Opening The Lid At A Maximum Angle Of 105 Degrees.
Easy To Install: Comes With An Exclusive Original Design Installation Card, Combined With The Most Detailed Installation Video Of The Entire Network On This Page, Allowing You To Complete The Hinge Installation Easily.
Features
- STURDY LID STAY WITH SOFT CLOSE: Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. And per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch
- EASY TO INSTALL: Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allowing you to complete the hinge installation easily
- LID STAY SLOW CLOSING: Lid stay support built-in hydraulic dampening device. Doors will come down slowly and softly which eliminates slammed doors or smashed fingers
- COMPACT DESIGN OF LID STAY HINGE allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum angle of 105 degrees
- KEEP LID HINGE STAY OPEN & WIDE USAGE: Easy to follow install instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right
- See more on Amazon...
Brand: Ravaver | Manufacturer: Ravaver
Dimensions: 1.00 x 8.00 x 2.00 inches
See On Amazon #5
FELICON Folding Utility Cart Portable Rolling Crate Handcart with Durable Heavy Duty Plastic Telescoping Handle Collapsible Hidden Lid 4 Rotate Wheels for Travel Shop Move Office Teacher(Green&Gray)
Asin: B09X9GFWHB
【Foldable Design, Easy To Store】This Compact Rolling Crate Can Be Folded Easily With Dimension 16.92*16.92*3.74 In Inch, Save More Space, And Light Weight(7.2 Lbs), Easy To Carry In Your Backpack Or By Hand For Actual Needs, And Unfold The Trolley Whenever Use, More Convenient..
【Easy To Use】This Fashion Hand Truck Cart Can Be Easily Assemble By Just Unfolding It, The Side Sliding Button Can Keep It Fixed As A Box, With Lid, You Can Load More Item On The Box, Or Use As Seat Or Step Stool, Or You Can Remove The Lid, Hang It In The Front For Loading Lengthy Item, Very Versatile, Product Covered Under One Or More Claims Of Licensed U.S. Patent Nos. 11,565,735 And 11,338,835. Note:If Any Questions, Pls Feel Free To Contact Us..
【Box Appearance, More Beautiful And Functional】This Durable Utility Handcart Case Has A Maximum Capacity Of 110 Lbs, The Telescoping Handle And Collapsible Removable Hidden Lid Allow You To Transport More Different Kinds Of Item Like Books Files Classroom Supplies Grocery Laundry Or Personal Items For Traveling, Shopping, Or Moving, Etc..
【High Quality Material, Safe And Reliable】This Folding Hand Cart Is Made Of Premier Sturdy Durable Environment Friendly Polypropylene Case With Rust-Proof Aluminum Alloy Handle(Stronger And Lighter) And Wear &Pressure Resistance Rubber Wheels, Easy To Roll On Any Road, Ensure Longevity..
Features
- Unique 4 Rotate Wheel Design, More Practical This foldable utility cart is equipped with 4 detachable 360 rotate noiseless wheels, easy to change direction when use, and two rear wheels with brake button can prevent the dolly from sliding when not use, no worries, more useful.
- High Quality Material, Safe and Reliable This folding hand cart is made of premier sturdy durable environment friendly polypropylene case with rust-proof aluminum alloy handle(stronger and lighter) and wear &pressure resistance rubber wheels, easy to roll on any road, ensure longevity.
- Foldable Design, Easy to Store This compact rolling crate can be folded easily with dimension 16.92*16.92*3.74 in inch, save more space, and light weight(7.2 lbs), easy to carry in your backpack or by hand for actual needs, and unfold the trolley whenever use, more convenient.
- Box Appearance, More Beautiful and Functional This durable utility handcart case has a maximum capacity of 110 lbs, the telescoping handle and collapsible removable hidden lid allow you to transport more different kinds of item like books files classroom supplies grocery laundry or personal items for traveling, shopping, or moving, etc.
- Easy to Use This fashion hand truck cart can be easily assemble by just unfolding it, the side sliding button can keep it fixed as a box, with lid, you can load more item on the box, or use as seat or step stool, or you can remove the lid, hang it in the front for loading lengthy item, very versatile, Product covered under one or more claims of Licensed U.S. Patent Nos. 11,565,735 and 11,338,835. Note:If any questions, pls feel free to contact us.
- See more on Amazon...
Brand: FELICON | Manufacturer: FELICON
Dimensions: 41.00 x 14.96 x 16.92 Inches | Weight: 7.20 Pounds
See On Amazon #6
MORINBO Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)
Asin: B0CDB755XD | Model: MODP-168 | PartNumber: MODP-168
Lid Stay Slow Closing 🌟 Lid Stay Support Built-In Hydraulic Dampening Device. Doors And Lids Will Come Down Slowly And Softly Which Eliminates Slamming Doors Or Smashed Fingers..
Keep Lid Hinge Stay Opening & Wide Usage 🌟 Updated Manual Can Be Downloaded In Amazon Page.Easy To Follow Installation Instructions Ensure A Perfect Install The First Time! Lid Stay Can Be Installed On The Left Or On The Right..
Compact Design Of Lid Stay Hinge 🌟 The Compact Design Allows For Installation In Tight Fit Areas. The Lid Hinges Supports Opening The Lid At A Maximum Angle Of 105 Degree..
Easy To Install 🌟 Comes With An Exclusive Original Design Installation Card, Combined With The Most Detailed Installation Video Of The Entire Network On This Page, Allows You To Easily Complete The Hinge Installation..
Features
- STURDY LID STAY WITH SOFT CLOSE Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch.
- EASY TO INSTALL Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation.
- LID STAY SLOW CLOSING Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
- COMPACT DESIGN OF LID STAY HINGE The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
- KEEP LID HINGE STAY OPENING & WIDE USAGE Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
- See more on Amazon...
Brand: MORINBO | Manufacturer: MORINBO
Dimensions: 0.60 x 8.60 x 2.10 inches
See On Amazon #7
Lid Support Hinge, Tiberham Folding Lid Stay Hinge, Lid Lift Up Stay Buffer Damper for Kitchen Cabinet Door Cupboard Toy Box (Pack of 2)
Asin: B07JB4Y759 | Model: BUFFER_HINGE | PartNumber: BUFFER_HINGE | Ean: 0726853437724 | UPC: 726853437724
High Load Capacity: Each Lid Stay Can Be Used For Right Or Left Hand Mounting. The Durable Materials Together With The Strong Mechanism Enable The Buffer Hinge To Hold Door Weight Up To 22 Lbs When 2 Pcs Are Used.
Buy With Confidence: The Buffer Hinges Come With Screws And Rivets For Easy Installation. Detail Technical Specifications Are Available In The Instruction. Just Buy With Confidence As We Are Always Here For You To Provide 100% Satisfactory Service.
Wide Applications: Double-Arm Folding Support Hinges Can Hold The Door In Any Open Position Or Lets It Slide Down Gently Without Smashing Your Fingers, Perfect For A Variety Of Lids Or Flaps..
Adjustable Intensity: With The Included Allen Wrench, The Buffer Hinges Are Fully Adjustable For Different Weight By Turning The Screw In The Middle Of The Arm To Set Up Appropriate Friction Pressure So That The Lid Won’T Come Crash Down While Closing.
Features
- DURABLE FOR EXTENDED USE: Made of premium quality zinc alloy with maximum corrosion resistance and durability, the lid stay hinges are made to provide constant support for years to come
- ADJUSTABLE INTENSITY: With the included Allen wrench, the buffer hinges are fully adjustable for different weight by turning the screw in the middle of the arm to set up appropriate friction pressure so that the lid won t come crash down while closing
- HIGH LOAD CAPACITY: Each lid stay can be used for right or left hand mounting. The durable materials together with the strong mechanism enable the buffer hinge to hold door weight up to 22 lbs when 2 pcs are used
- WIDE APPLICATIONS: Double-arm folding support hinges can hold the door in any open position or lets it slide down gently without smashing your fingers, perfect for a variety of lids or flaps.
- BUY WITH CONFIDENCE: The buffer hinges come with screws and rivets for easy installation. Detail technical specifications are available in the instruction. Just buy with confidence as we are always here for you to provide 100% satisfactory service
- See more on Amazon...
Brand: Tiberham | Manufacturer: Tiberham
Dimensions: 0.10 x 7.75 x 3.20 inches
See On Amazon #8
Douper Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors (Pack of 2)
Asin: B09P86DHSY | Model: 168 | PartNumber: 168
Compact Design Of Lid Stay Hinge - The Compact Design Allows For Installation In Tight Fit Areas. Douper Lid Hinge Supports Opening The Lid At A Maximum Angle Of 105 Degrees.
Only Takes 10 Minutes To Complete The Installation By Following The Install Placement Measurement Card And Installation Video..
Wide Usage -- Never Worry Again About Having To Prop The Lid Open. This Lid Support Will Hold The Lid Open Until You Are Ready To Close. This Lid Stay Is Deal For Upward Opening Flaps, Such As Toy Boxes And Vanity Lids, Vertical Cabinet Doors And Storage Box, Cabinetry, Piano Or Butt Hinges.
2-Way Installation – Douper Hinges Can Be Installed On Top Opening Or Upward Opening Doors. Each Lid Hinge Can Be Used For Right Or Left Hand Mounting..
Conditions Of Use - Per Lid Stay Hinge Can Support The Range Of Door Weight 3-10 Lbs, Door Height Range18-19 Inch. Weight Support Will Be Doubled By Using 2 Lid Supports (6Lbs-20Lbs).
Features
- LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
- CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs)
- COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees
- 2-WAY INSTALLATION Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting.
- ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video.
- WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges
- See more on Amazon...
Brand: douper | Manufacturer: Douper Ltd
Dimensions: 1.00 x 7.00 x 5.00 inches
See On Amazon #9
QWORK Premium Lid Stay Hinge with 40lbs Capacity - Easy Installation, 2 Pack Adjustable Range of 75 , 90 , 110 - Ideal for Right or Left Hand Mounting
Asin: B0838B4TLJ | Model: WD3140 | PartNumber: WD3140 | Ean: 0766415024160 | UPC: 766415024160
Adjustable Range For Convenience: The Hinge Offers Three Adjustability Options, Allowing You To Choose Between 75°, 90°, Or 110° Opening Angles For Optimal Accessibility..
Effortless Installation: With An Easy Installation Process, This Hinge Is A Perfect Choice For Diy Enthusiasts Or Professionals. 2 Pack..
Right Or Left Hand Mounting: Designed To Suit Both Right-Handed And Left-Handed Users, This Hinge Provides Versatility And Flexibility For Any Application Or Preference..
High Bearing Capacity: With A Maximum Capacity Of 40Lbs For Two Hinges, It Ensures Secure Support For Heavy Lids, Making It Ideal For Storage Chests, Cabinets, And Other Furniture..
Features
- Versatile Lid Stay Hinge: This top-quality hinge is designed specifically for various lid and flap applications, providing consistent and reliable support.
- High Bearing Capacity: With a maximum capacity of 40lbs for two hinges, it ensures secure support for heavy lids, making it ideal for storage chests, cabinets, and other furniture.
- Adjustable Range for Convenience: The hinge offers three adjustability options, allowing you to choose between 75 , 90 , or 110 opening angles for optimal accessibility.
- Right or Left Hand Mounting: Designed to suit both right-handed and left-handed users, this hinge provides versatility and flexibility for any application or preference.
- Effortless Installation: With an easy installation process, this hinge is a perfect choice for DIY enthusiasts or professionals. 2 Pack.
- See more on Amazon...
Brand: QWORK | Manufacturer: QWORK
See On Amazon #10
Toy Box Hinges Soft Close - Lid Support Hinges (Pack of 2), Safety Soft Close Hinges for Chest Toy Box, Slow Close Hinges,Lid Support Soft Close 105 Degree Open (APFFSY)
Asin: B09YXTKTP9 | Ean: 0631344781104 | UPC: 631344781104
Small Compact Design — The Compact Design Allows For Installation In Tight Fit Areas. The Lid Stay Allows The Lid To Open At A Maximum 105 Degree Angle. Perfect For Any Lids Or Flaps When Lid Support Soft Close Is Required..
Refund Guarantee — If You Are Not Satisfied With Your Purchase For The Toy Box Hinges Soft Close Any Reason, We Are Pleased To Give You 100% Money-Back. We Endeavor To Uphold Any Exceptional Services That You Have Come To Expect From Us..
Easy To Install — The Safety Hinges Can Be Mounted On The Left Or Right Side, Also Used For Side-Mounting And Top-Mounting. Keep The Soft Close Hinges Installed For 75°-105° Adjustable Opening Angles, Depending On Actual Situation. It Can Fit For Most Lids.
Keep Lid Stay Open — The Lid Support Hinge Will Hold The Lid Open Until You Want To Close. Never Worry About Having To Support Lid By Hand Anymore. It's Widely Usage As Slow Close Hinges For Toy Box Hinges, Chest Hinges, Also Fit For Overhead Kitchen Cupboard, Wardrobe Lids Too！.
Features
- GENTLE SLOW CLOSE HINGES It's heavy lid hinge and soft close lid support. Expecially excellent slow close and safety solution on chest hinges, toy box hinges. Lids will go down slowly and gently to avoid slams shut and crush the little fingers of children!
- KEEP LID STAY OPEN The lid support hinge will hold the lid open until you want to close. Never worry about having to support lid by hand anymore. It's widely usage as slow close hinges for toy box hinges, chest hinges, also fit for overhead kitchen cupboard, wardrobe lids too
- SMALL COMPACT DESIGN The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 105 degree angle. Perfect for any lids or flaps when lid support soft close is required.
- EASY TO INSTALL The safety hinges can be mounted on the left or right side, also used for side-mounting and top-mounting. Keep the soft close hinges installed for 75 -105 adjustable opening angles, depending on actual situation. It can fit for most lids
- REFUND GUARANTEE If you are not satisfied with your purchase for the toy box hinges soft close any reason, we are pleased to give you 100% money-back. We endeavor to uphold any exceptional services that you have come to expect from us.
- See more on Amazon...
Brand: APFFSY | Manufacturer: APFFSY
Dimensions: 0.40 x 8.80 x 2.20 inches
See On Amazon #11
Jiozermi 2 Packs Lid Support Hinge, 180 Degree Rotatable Hinge, 201 Stainless Steel Lid Stay Hinge for Boxes Cases Cabinet
Asin: B09HGZG5PG | Model: HJS2021092901 | PartNumber: HJS2021092901
▶【Product Material】: The Cabinet Support Hinge Is Made Of Stainless Steel For Durable, Anti-Rust & Anti-Corrosion. You Can Put Them In Outdoor. It Still Maintains Wonderful Flexibility Over Time..
▶【Happy Customers】: We Feel Confident That You'll Love Our Product, Even So, We'll Give Your Money Back If You're Not Thrilled With Your Purchase Within 30 Days. Simply Let Us Know To Make It Right, And Feel Free To Ask Any Question..
▶【Wide Application】: The Folding Support Hinge Is Suitable For Furniture Cabinets, Wooden Boxes, Jewelry Cases, Chest, Cupboard, Office Racks, Wardrobes And So On..
▶【Product Size】: The Folding Length Of Cabinet Support Hinge Is 4.6 Inch / 117Mm. Unfolded Length Is 8.7 Inch / 220 Mm. Mounting Hole Distance: 0.8 Inch /20Mm..
Features
- Package Contents : You will receive 2 pcs lid hinge support and 12 x mounting screws. The hinge can be used for side or bottom mounting.
- Product Size : The folding length of cabinet support hinge is 4.6 inch / 117mm. Unfolded length is 8.7 inch / 220 mm. Mounting Hole Distance: 0.8 inch /20mm.
- Product Material : The cabinet support hinge is made of stainless steel for durable, anti-rust & anti-corrosion. You can put them in outdoor. It still maintains wonderful flexibility over time.
- Wide Application : The folding support hinge is suitable for furniture cabinets, wooden boxes, jewelry cases, chest, cupboard, office racks, wardrobes and so on.
- Happy Customers : We feel confident that you'll love our product, even so, we'll give your money back if you're not thrilled with your purchase within 30 days. Simply let us know to make it right, and feel free to ask any question.
- See more on Amazon...
Brand: Jiozermi | Manufacturer: Jiozermi
See On Amazon #12
Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors Toy Box Hinges Soft Close Chest Hinge 6-12lb/1pc
Asin: B09FHY5H55 | Ean: 0631344780763 | UPC: 631344780763
【Small Compact Design -Weight Capacity: 6-12Lb/1Pc, 15-25Lb/2Pcs】 — The Soft Close Hinges Compact Design Allow For Installation In Tight Fit Areas, And The Lid To Open At A Maximum 105 Degree Angle. Perfect For Light Lids Or Flaps Under 25Lbs And Lid Support Soft Close Is Required..
【Refund Guarantee】 — If You Are Not Satisfied With Your Purchase For The Toy Box Hinges Soft Close Any Reason, We Are Pleased To Give You 100% Money-Back. We Endeavor To Uphold Any Exceptional Services That You Have Come To Expect From Us..
【Easy To Install — Import：Refer To Our Videos And Images!! 】 — The Chest Hinges Can Be Mounted On The Left Or Right Side, Also Used For Side-Mounting And Top-Mounting. Keep The Soft Close Hinges Installed For 75°-105° Adjustable Opening Angles..
【Keep Lid Stay Open】 — The Toy Box Hinges Will Hold The Lid Opened Until You Want To Close. Lids Will Go Down Slowly And Gently To Avoid Slams Shut And Crush The Little Fingers Of Kids. Good Gift Fit For The Kids' Toy Box And Toy Chest..
Features
- GENTLE SLOW CLOSE HINGES Lid support hinges for wooden box and soft close lid support. It's widely usage and excellent safety solution on soft close lid support chest hinges, toy box hinges, trunk hinges, bench hinge.
- KEEP LID STAY OPEN The toy box hinges will hold the lid opened until you want to close. Lids will go down slowly and gently to avoid slams shut and crush the little fingers of kids. Good gift fit for the kids' toy box and toy chest.
- SMALL COMPACT DESIGN -Weight Capacity: 6-12lb/1pc, 15-25lb/2pcs The soft close hinges compact design allow for installation in tight fit areas, and the lid to open at a maximum 105 degree angle. Perfect for light lids or flaps under 25lbs and lid support soft close is required.
- EASY TO INSTALL Import Refer to our videos and images!! The chest hinges can be mounted on the left or right side, also used for side-mounting and top-mounting. Keep the soft close hinges installed for 75 -105 adjustable opening angles.
- REFUND GUARANTEE If you are not satisfied with your purchase for the toy box hinges soft close any reason, we are pleased to give you 100% money-back. We endeavor to uphold any exceptional services that you have come to expect from us.
- See more on Amazon...
Brand: APFFSY | Manufacturer: APFFSY
Dimensions: 0.39 x 4.70 x 2.20 inches
See On Amazon #13
Douper 250N Gas Struts Heavy Duty Soft Close Lid Stays Safety Lid Support Hinges Pneumatic Lid Lifters Gas Springs Pack of 2
Asin: B09P7XQJT8 | Model: DP057-TATAMI-250N | PartNumber: DP057-TATAMI-250N
Weight Capacity -- Douper 250N Heavy Duty Gas Struts Can Support Min 30 Lbs And Max 40 Lbs Lid And Lower Gently; Weight Support Will Be Doubled With 2 Hinges (60Lbs -80Lbs/ 2Pcs).
Warm Tips -- Douper Hinges Will Not Applicable With The Lid At Width More Than 50” And Height Over 25”. And Must With A 9 Inch Clearance. Hinges Will Not Work If Your Lid Doesn’T Match Specified Dimension And Weight Requirement.
75°-105° Open Angle -- Each Lid Hinge Can Be Used For Right Or Left Hand Mounting, Keep The Hinge Installed For 75°-105° Adjustable Opening Angles, Depending On Actual Situation. Note: No Adjustments On Placement Measurements Of The Hinge Mounted On Side Board..
Holds Lid Open -- These Hinges Will Hold Your Lid Open Until You Push It Down. Never Worry Again About Having To Prop The Lid Open.
Features
- GENTLY CLOSE DESIGN -- Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers
- HOLDS LID OPEN -- These hinges will hold your lid open until you push it down. Never worry again about having to prop the lid open
- WEIGHT CAPACITY -- Douper 250N heavy duty gas struts can support Min 30 lbs and Max 40 lbs lid and lower gently; Weight support will be doubled with 2 hinges (60lbs -80lbs/ 2pcs)
- 75 -105 OPEN ANGLE -- Each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75 -105 adjustable opening angles, depending on actual situation. Note: NO adjustments on placement measurements of the hinge mounted on side board.
- WARM TIPS -- Douper hinges will not applicable with the lid at width more than 50 and height over 25 . And must with a 9 inch clearance. Hinges will not work if your lid doesn t match specified dimension and weight requirement
- See more on Amazon...
Brand: douper | Manufacturer: Douper Ltd
Dimensions: 0.10 x 14.00 x 1.00 inches | Weight: 1.00 pounds
See On Amazon #14
VOCOMO Soft Close Lid Support, 250N Gas Struts Heavy Duty Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs (2 Pack)
Asin: B08HQ3GQW7 | Model: CH00132 | PartNumber: CH00132 | Ean: 0787794407559 | UPC: 787794407559
Lid Stay 105 Degree Open With Soft Close - The Lid Stay Allows The Lid To Open At A Maximum 105 Degree Angle..
No Risk Purchase - We Provide Worry-Free Lifetime Warranty(No Man-Made)And Friendly Customer Service..
Easy Install Instruction - Easy To Follow Installation Instructions Ensure A Perfect Install The First Time! Lid Stay Can Be Installed On Either The Left Or The Right Side..
250N Heavy Duty Gas Struts - A 250N Heavy-Duty Gas Struts May Be Supported Maximum 45Lbs Lid And Gently Lowered; 2 Heavy Gas Struts May Support Maximum 90 Pounds Of The Lid..
Features
- Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers.
- 250N heavy duty gas struts - A 250N heavy-duty gas struts may be supported maximum 45lbs lid and gently lowered; 2 heavy gas struts may support maximum 90 pounds of the lid.
- Lid stay 105 degree open with soft close - The lid stay allows the lid to open at a maximum 105 degree angle.
- Easy install instruction - Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.
- No risk purchase - We provide worry-free lifetime warranty(no man-made)and friendly customer service.
- See more on Amazon...
Brand: VOCOMO | Manufacturer: VOCOMO
Dimensions: 0.04 x 12.35 x 1.85 inches
See On Amazon #15
KOMOHOM(2PCS) Toy Box Hinges Soft Close Lid Support Hinges for Toy Box,Upward Top-Opening Flap Doors Safety Soft Close Hinges for Chest Slow Close Hinges Lid Stay 105 Degree Open with Soft Close
Asin: B0BWXT1RWW | Model: TZL11102 | PartNumber: TZL11102
【Suitable For Upward Top-Opening Flap Doors】 This Hydraulic Chest Hinges Arm Is Deal For Upward Top-Opening Flap Doors, Such As Toy Boxes And Vanity Lids, Vertical Cabinet Doors And Storage Box, Cabinetry,Hinges For Wooden Box And Soft Close Lid Support. Chest Hinges Toy Box Hinges Locking Hinges,Attic Door Hinge,Blanket Chest Hinges,Bench Lid Hinges,Soft Close Bench Hinge,Storage Hinges,Chest Prop Rod.Especially Excellent Slow Close And Safety Solution..
【Easy To Install】 Easy To Follow Graphic Installation Instructions Can Be Downloaded In Amazon Page. Ensure A Perfect Install The First Time!.
【Refund Guarantee】 If You Are Not Satisfied With Your Purchase For The Toy Box Hinges Soft Close Any Reason, We Are Pleased To Give You 100% Money-Back. We Endeavor To Uphold Any Exceptional Services That You Have Come To Expect From Us..
【Wide Application Range】 The Slow Close Hinges Is Made Of Nickel Plated Steel And Plastic, And Per Lid-Stay Support The Range Of Door Weight 5~12 Lbs(10~24 Lbs/2Pcs), Height 18-19 Inch. The Safety Soft Close Hinges Will Not Applicable With The Lid At Width More Than 27’’ And Height Over 18’’.The Lid Support Hinges Opening The Lid At A Maximum Angle Of 105 Degree. Each Hinge Can Be Used For Right Or Left Side Mounting..
【Keep Lid Stay Open】 This Gas Strut Lid Hinge Will Hold The Lid Open Until You Are Ready To Close. Never Worry Again About Having To Prop The Lid Open. It's Widely Usage As Slow Close Hinges For Toy Boxes, Chest Hinges, Also Fit For Overhead Kitchen Cupboard, Cabinet Hinges Too..
Features
- GENTLE SLOW CLOSE HINGES Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.Excellent safety solution for toy box lid and kitchen cabinets.
- KEEP LID STAY OPEN This gas strut lid hinge will hold the lid open until you are ready to close. Never worry again about having to prop the lid open. It's widely usage as slow close hinges for toy boxes, chest hinges, also fit for overhead kitchen cupboard, cabinet hinges too.
- SUITABLE FOR UPWARD TOP-OPENING FLAP DOORS This hydraulic chest hinges arm is deal for upward top-opening flap doors, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry,hinges for wooden box and soft close lid support. Chest hinges toy box hinges locking hinges,attic door hinge,blanket chest hinges,bench lid hinges,soft close bench hinge,storage hinges,chest prop rod.Especially excellent slow close and safety solution.
- WIDE APPLICATION RANGE The slow close hinges is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 5~12 lbs(10~24 lbs/2pcs), Height 18-19 inch. The safety soft close hinges will not applicable with the lid at width more than 27 and height over 18 .The lid support hinges opening the lid at a maximum angle of 105 degree. Each hinge can be used for right or left side mounting.
- EASY TO INSTALL easy to follow graphic installation instructions can be downloaded in amazon page. Ensure a perfect install the first time!
- REFUND GUARANTEE If you are not satisfied with your purchase for the toy box hinges soft close any reason, we are pleased to give you 100% money-back. We endeavor to uphold any exceptional services that you have come to expect from us.
- See more on Amazon...
Brand: KOMOHOM | Manufacturer: KOMOHOM
Dimensions: 0.39 x 4.70 x 2.20 inches
See On Amazon #16
vrbabies 2 Pack 100N/22.5lb Gas Strut, 10in Gas Struts for Cabinets Heavy Lid, Gas Spring for Lift Support Hydraulic Hinges for Toy Box, Truck Door Hinges Shock Absorber Soft Close Hinge for Toolbox
Asin: B0B9MBPKV6 | Ean: 0794456501142 | UPC: 794456501142
🏒2 Pieces Hood Lift Bracket - The Hydraulic Hinges Have 4, 10.6" (Approx. 27 Cm), Weight Capacity Of 100 N/22 Lbs (Approx. 10.2 Kg). The Door Hinges Open The Lid At A Maximum Angle Of 100 Degrees, With A High Load Capacity And Even Force, Without Breaking Or Bending. The Hood Support Bracket Fits Most Cabinets And Doors..
🏒 Wide Range Of Use-Lifting Support Struts Have Strong And Easy Lifting Ability. Garage Door Spring Compression Tool For Doors, Cabinets, Boxes, Room Lathes, Boats, Garages And Other Cabinet Doors, So That The Door Can Open Or Close Slowly To Prevent Bumping, Reduce The Closing Speed And Keep Little Fingers Safe. If You Find A Missing/Defective Part, Please Contact Me!!! !.
🏒Easy To Install-The Gas Struts Suitable For Large Hydraulic Hinges For Toy Chest, Rv Lifts, Cabinet. Note: The Rectanglular Mount Must Tighten With Screws, Otherwise Will Easy To Damage. 1.The Gas Spring Must Be Installed In The Downward Position, Not Upside-Down, Which Can Reduce Friction And Ensure The Best Damping Quality And Cushioning Performance. 2.The Gas Strut Is Strictly Prohibited From Rotating To The Left. If You Need To Adjust The Direction, You Can Only Turn It To The Right..
🏒 Easy To Use - The Gas Struts For Heavy Lid Between Cabinet Has A Large Contact Area And Three-Point Positioning Makes The Gas Shock Absorber Sturdy And Durable. This Hood Lift Bracket Comes With Instructions (Not Necessarily In Chinese) For Easy Installation Or Replacement Of Parts And Screws. The Gas Spring Is The Best Choice For Lifting The Door..
Features
- Heavy duty gas column - The gas strut spring is the ideal motion control device for lifting motion, RV lift kit thick and durable, using hydraulic system, easy to operate, good sealing, no oil leakage. The gas strut spring is Hydraulic support, automatic expansion and contraction.
- Easy to use - The gas struts for heavy lid between cabinet has a large contact area and three-point positioning makes the gas shock absorber sturdy and durable. This hood lift bracket comes with instructions (not necessarily in Chinese) for easy installation or replacement of parts and screws. The gas spring is the best choice for lifting the door.
- 2 pieces hood lift bracket - The hydraulic hinges have 4, 10.6 (approx. 27 cm), weight capacity of 100 N/22 lbs (approx. 10.2 kg). The door hinges open the lid at a maximum angle of 100 degrees, with a high load capacity and even force, without breaking or bending. The hood support bracket fits most cabinets and doors.
- Easy to install-The gas struts suitable for large hydraulic hinges for toy chest, RV lifts, cabinet. Note: The rectanglular mount must tighten with screws, otherwise will easy to damage. 1.The gas spring must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping quality and cushioning performance. 2.The gas strut is strictly prohibited from rotating to the left. If you need to adjust the direction, you can only turn it to the right.
- Wide range of use-Lifting support struts have strong and easy lifting ability. Garage door spring compression tool for doors, cabinets, boxes, room lathes, boats, garages and other cabinet doors, so that the door can open or close slowly to prevent bumping, reduce the closing speed and keep little fingers safe. If you find a missing/defective part, please contact me!!! !
- See more on Amazon...
Brand: vrbabies | Manufacturer: vrbabies
Dimensions: 0.10 x 10.40 x 0.60 inches
See On Amazon #17
Heavy Duty Brass Plated Lid Stay | Lid Support Hinges for Drop Front Desk, Trunk, Chest | M-108
Asin: B07R2FD12F | Ean: 0677946394151 | UPC: 677946394151
The Package Contains One Left And One Right Lid Hinge Support (Mounting Screws Not Included)..
These Lid Supports Can Be Used When Building A New Project Or To Replace Broken Or Worn-Out Hardware On Antique Furniture..
Drop Hinges Can Be Used For Cabinets With Drop-Down Tables, Chests, Steamer Trunks, Drop-Front Secretary Desks, Display Cases, Boxes, And More..
These Drop Front Desk Hinges Are Made Of Steel With A Brass Finish Applied. Sturdy Construction Ensures Smooth Operation And A Long Lifespan..
Features
- Dimensions: 10 3/8" Overall Length; 9/16" Arm Width.
- These drop front desk hinges are made of steel with a brass finish applied. Sturdy construction ensures smooth operation and a long lifespan.
- The package contains one left and one right lid hinge support (mounting screws not included).
- Drop hinges can be used for cabinets with drop-down tables, chests, steamer trunks, drop-front secretary desks, display cases, boxes, and more.
- These lid supports can be used when building a new project or to replace broken or worn-out hardware on antique furniture.
- See more on Amazon...
Brand: UNIQANTIQ HARDWARE SUPPLY | Manufacturer: UNIQANTIQ HARDWARE SUPPLY
Dimensions: 0.04 x 10.38 x 0.56 inches
See On Amazon #18
VOCOMO Lid Stay 105 Degree Open with Soft Close, Lid Support Hinge for Toy Box, Easy Install
Asin: B07WH5CBTP | Ean: 0778197616501 | UPC: 778197616501
105 Degree Open - The Lid Hinges Supports Opening The Lid At A Maximum Angle Of 105 Degree. Each Hinge Can Be Used For Right Or Left Side Mounting..
Easy To Install - Easy To Follow Graphic Installation Instructions Ensure A Perfect Install The First Time..
Small Compact Design - The Compact Design Allows For Installation In Tight Fit Areas..
Soft Close - Lids Will Lower Slowly And Gently To Avoid Slams Shut And Crush The Little Fingers Of Children..
Features
- LID SUPPORT HINGE - Never worry again about having to prop the lid open. This lid stay will hold the lid open until you are ready to close.
- SOFT CLOSE - Lids will lower slowly and gently to avoid slams shut and crush the little fingers of children.
- 105 DEGREE OPEN - The lid hinges supports opening the lid at a maximum Angle of 105 degree. Each hinge can be used for right or left side mounting.
- SMALL COMPACT DESIGN - The compact design allows for installation in tight fit areas.
- EASY TO INSTALL - Easy to follow graphic installation instructions ensure a perfect install the first time.
- See more on Amazon...
Brand: VOCOMO | Manufacturer: VOCOMO
See On Amazon #19
Stainless Steel Milk Bucket with Lid 3.5 Qt Dairy Pail
Asin: B00UK6WB2Y | Ean: 0764527040856, 0755746606831 | UPC: 755746606831, 764527040856
Seamless Rolled Pail With Welded Handle Attachments.
Ss Pails With Lids Approx. Size W/O Lids 3.5 Ltr. Pail With Lid6.75" H X 8"Od 4.5 Ltr. Pail With Lid7"H X 8.5"Od 5 Ltr. Pail With Lid7.5"H X 9"Od 7 Ltr. Pail With Lid8.5"H X 9.75"Od 10 Ltr. Pail With Lid9.5"H X 10.5" Od 13 Ltr. Pail With Lid10"H X 11.5"Od 17 Ltr. Pail With Lid11"H X 12.25" Od.
Edge Of Pail Is Open For Cleaning With Brush.
Optional Loose Fitting Lid With Wrap Over Edge To Stay On Until 15 Degree Tip.
Features
- Stainless Steel Pail with swinging bail handle
- Optional loose fitting lid with wrap over edge to stay on until 15 degree tip
- Seamless rolled pail with welded handle attachments
- Edge of pail is open for cleaning with brush
- SS PAILS WITH LIDS Approx. size w/o lids 3.5 Ltr. Pail with Lid6.75 H x 8OD 4.5 Ltr. Pail with Lid7H x 8.5OD 5 Ltr. Pail with Lid7.5H x 9OD 7 Ltr. Pail with Lid8.5H x 9.75OD 10 Ltr. Pail with Lid9.5H x 10.5 OD 13 Ltr. Pail with Lid10H x 11.5OD 17 Ltr. Pail with Lid11H x 12.25 OD
- See more on Amazon...
Brand: Quality Dairy | Manufacturer: Shenandoah Homestead Supply
Dimensions: 6.75 x 8.00 x 8.00 Inches | Weight: 1.00 pounds
See On Amazon #20
YUMORE Gas Struts 200N/30LB Heavy Duty Support Hinges Automatic Slow Lowering Safety Pneumatic for Cabinets Wooden Box Toy Chest
Asin: B087CG18D9 | Ean: 0682838673566 | UPC: 682838673566
Items Size - Long 12”, 75°-105° Adjustable Opening Angles, Max Weight Support:60Ib/200N/2Pcs.
Package Includes - Yumore 200N Gas Struts X 2 Pcs, Stainless Steel Hinges X 2 Pcs, Comes With Mounting Hardware Accessories. If Any Issue With Your Yumore Products, Please Be Free To Contact Us, And We Will Offer Refund Or Rechange With Pleasure. Just Enjoy This Absolutely Risk Free Purchase.
Perfect Design - The Best Solution For Lids Or Flaps Of Furniture, Cabinet, Cupboard Or Wooden Storage Boxes When A Soft Closing Is Required. Excellent Safety Solution For You When You Think The Lids Need To Lower Slowly And Gently.
Easy Installation - Complete With Mounting Accessories, Premium Stainless Steel Screws And Top Quality Anchors. You Can Get 2 Piece Free Hinges For Every Pack! So You Can Install The Gas Sturts And Replace The Old Hinges At The Same Time.
Features
- STURDY & DURABLE - Made of top quality cold rolled steel in satin nickel which is anti-corrosion,sturdy load-bearing material provides strong support, build to resist daily scratches, corrosion and tarnishing
- EASY INSTALLATION - Complete with mounting accessories, premium stainless Steel screws and top quality anchors. You can get 2 piece free hinges for every pack! So you can install the gas sturts and replace the old hinges at the same time
- ITEMS SIZE - Long 12 , 75 -105 adjustable opening angles, Max Weight Support:60IB/200N/2pcs
- PERFECT DESIGN - The best solution for lids or flaps of furniture, cabinet, cupboard or wooden storage boxes when a soft closing is required. Excellent safety solution for you when you think the lids need to lower slowly and gently
- Package Includes - YUMORE 200N Gas Struts x 2 PCS, Stainless Steel Hinges x 2 PCS, comes with Mounting Hardware accessories. If any issue with your YUMORE products, please be free to contact us, and we will offer Refund or Rechange with pleasure. Just enjoy this absolutely RISK FREE purchase
- See more on Amazon...
Brand: YUMORE | Manufacturer: YUMORE
Dimensions: 1.18 x 13.78 x 2.76 inches
See On Amazon
Looking For Something Else?
Search