2.5 Inch Universal Catalytic Converter, 2.5" Inlet/Outlet Universal Front Catalytic Converter with O2 Port (Direct-Fit)
Asin: B0C8H2JBRV | Model: 2.5 Inch Universal Catalytic Converter | PartNumber: 2.5 Inch Universal Catalytic Converter
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.High Quality: Our 2.5 Inch Universal Catalytic Converter Is Made Of Stainless Steel With Highly Resistant To Heat, Rust, Corrosion And Longer Service Life..
Warranty: We Provide A Lifetime Warranty On Our 2.5 Inch Universal Catalytic Converter, Feel Free To Contact Us Via Amazon..
Direct-Fit: The 2.5" Universal Catalytic Converter Perfectly Matched With The Original Car, And Can Be Installed Directly. (Note: Professional Installation Would Be Highly Recommended)..
Dimension: This 2.5 Universal Catalytic Converter With 2.5" Inlet , 2.5" Outlet, Please Check That Your Vehicle's Exhaust Pipe Is The Appropriate Size Before Purchasing!.
Features
- Attention: Due to the increased emission standards in California, Colorado, New York, and Maine, this item doesn't ship to these states.
- Dimension: This 2.5 universal catalytic converter with 2.5 Inlet , 2.5 Outlet, please check that your vehicle's exhaust pipe is the appropriate size before purchasing!
- High Quality: Our 2.5 inch universal catalytic converter is made of stainless steel with highly resistant to heat, rust, corrosion and longer service life.
- Direct-Fit: The 2.5 universal catalytic converter perfectly matched with the original car, and can be installed directly. (Note: Professional installation would be highly recommended).
- Warranty: We provide a lifetime warranty on our 2.5 inch universal catalytic converter, feel free to contact us via Amazon.
- See more on Amazon...
Brand: HOPE YOU READY | Manufacturer: HOPE YOU READY
Dimensions: 11.61 x 4.72 x 8.46 inches
Warranty: 1 year
See On Amazon Similar To 2.5 Inch Universal Catalytic Converter
#1
2.5 Inch Exhaust Clamps,Lap Joint Band Clamp 2 Packs,2 1/2 Exhaust Muffler band Clamp,304 Stainless Steel Pipe Repair Clamp DecoHongDi
Asin: B0CLS5V1J9 | Model: DI2.5 | PartNumber: DI2.5 | Ean: 0794497939348 | UPC: 794497939348
Easy Install And Remove:Decohongdi Lap Joint Exhaust Muffler Band Clamp Adopts A Non-Welded Design,Make It Easy To Install Or Disassemble On Exhaust System Without Any Welding Required.Just Tighten The Bolt,Which Is Convenient And Will Saves Your Time And Labor..
Reliable Repair Solution:Our Exhuast Muffler Clamp Is Perfect For Various Components Of The Exhaust System,Including Muffler Pipes,Catalytic Converters,Etc..
Excellent Sealing Performance:I-Shape Metal Block Make The Force Of 360 Evenly Distributed,It Can Hold The Pipe Tightly And Provides A Good Seal..
High-Quality Material:Made From High-Quality 304 Stainless Steel,Decohongdi Muffler Band Clamp Ensures Thickness,Durability,Corrosion Resistance,And Anti-Rust Properties For Long-Lasting Performance..
Features
- Product Size:Universal fitment 2.5",joins 2.5"outer diameter pipe to 2.5"inner diameter pipe.
- High-quality Material:Made from high-quality 304 stainless steel,DecoHongDi muffler band clamp ensures thickness,durability,corrosion resistance,and anti-rust properties for long-lasting performance.
- Easy Install And Remove:DecoHongDi Lap Joint exhaust muffler band clamp adopts a non-welded design,make it easy to install or disassemble on exhaust system without any welding required.Just tighten the bolt,which is convenient and will saves your time and labor.
- Excellent Sealing Performance:I-shape metal block make the force of 360 evenly distributed,it can hold the pipe tightly and provides a good seal.
- Reliable Repair Solution:Our exhuast muffler clamp is perfect for various components of the exhaust system,including muffler pipes,catalytic converters,etc.
- See more on Amazon...
Brand: DecoHongDi | Manufacturer: Decohongdi
Dimensions: 3.54 x 2.83 x 2.99 inches | Weight: 1.64 pounds
See On Amazon #2
Walker 36272 Exhaust System Hanger
Asin: B001AX65QO | Model: 36272 | PartNumber: 36272 | Ean: 7258006516848, 0882852110447, 0086387362726 | UPC: 882852110447, 086387362726
Keeps Exhaust Parts In Place -- Designed To Support Undercar Exhaust Components.
Better Together -- Use Premium Walker Accessories When Installing Walker Catalytic Converters And Mufflers For A Complete Exhaust System Upgrade.
Available In Different Sizes -- Offered In A Variety Of Styles And Sizes For A Quality Vehicle Repair.
Premium Materials -- Made From Quality Steel For Durability And Long Life.
Oe Design -- Designed With Oe-Style Features For Easy Installation.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Universal fit, check product dimensions
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- KEEPS EXHAUST PARTS IN PLACE -- Designed to support undercar exhaust components
- OE DESIGN -- Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS -- Made from quality steel for durability and long life
- BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- See more on Amazon...
First Available: 11/14/2013
Brand: Walker | Manufacturer: Walker Exhaust
Dimensions: 2.00 x 10.00 x 4.00 Inches | Weight: 0.00 pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #3
Zlirfy Exhaust Clamp Exhaust Pipe Clamp,2.0 2.25 2.5 2.75 3.0 4.0 Butt Joint Stainless Steel Clamp Band,Universal Widening Clamp Butt Joint Exhaust Clamp,Fit for Exhaust Pipe (2.5inch)
Asin: B0C4F5L3RS | Model: 419PQGJ001 | PartNumber: 419PQGJ001
[Design Features] This Stainless Steel Clamp Band Clamp Is Designed With A 360 Degree Full Clamping Zone, And The Clamping Force Is Evenly Distributed Throughout The Entire 360 Degree Range To Prevent Leakage And Control Pipeline Deformation..
[Application] Sealed Exhaust Clamps Are Maintenance Components For Silencers. Narrow Band Clamps Can Be Used For Catalytic Converters, Exhaust Nozzles, Exhaust Manifolds, Exhaust Resonators, Exhaust Hoses, And Exhaust Muffler Maintenance Projects..
[Easy To Install] This Exhaust Band Clamp Sleeve Comes With Fastening Bolts. You Only Need To Tighten Or Lose The Bolts To Connect Or Release. No Welding Required, Easy To Use..
[6 Specifications]Our 2.5 Inch Exhaust Clamp Connects A Pipe With An Outer Diameter Of 2.5 "To A Pipe With An Outer Diameter Of 2.5". We Have A Total Of 6 Different Sizes Of Exhaust Clamps For You To Choose From And Purchase. Please Confirm The Specifications And Dimensions Before Purchasing..
Features
- [High Quality and Durability]The exhaust pipe clamp is made of high-quality stainless steel, which is rust proof, waterproof, durable, and corrosion-resistant. It can be reused and has a long service life.
- [6 Specifications]Our 2.5 inch exhaust clamp connects a pipe with an outer diameter of 2.5 to a pipe with an outer diameter of 2.5. We have a total of 6 different sizes of exhaust clamps for you to choose from and purchase. Please confirm the specifications and dimensions before purchasing.
- [Design Features] This stainless steel clamp band clamp is designed with a 360 degree full clamping zone, and the clamping force is evenly distributed throughout the entire 360 degree range to prevent leakage and control pipeline deformation.
- [Easy to Install] This exhaust band clamp sleeve comes with fastening bolts. You only need to tighten or lose the bolts to connect or release. No welding required, easy to use.
- [Application] Sealed exhaust clamps are maintenance components for silencers. Narrow band clamps can be used for catalytic converters, exhaust nozzles, exhaust manifolds, exhaust resonators, exhaust hoses, and exhaust muffler maintenance projects.
- See more on Amazon...
Brand: Zlirfy | Manufacturer: Zlirfy
Warranty: no
See On Amazon #4
Exhaust Clamps Band Clamp 2.5" Lap Joint - Stainless Steel Lap Joint Exhaust Band Clamp with 1 Block 2Pcs for 2.5" Od to 2.5" Id Exhaust Pipe, Muffler, Elbow and Exhaust Tubing Connection(2 Pack)
Asin: B082S9VNRP | Model: 2.5in | PartNumber: 2.5in | Ean: 0769638829871 | UPC: 769638829871
These Exhaust Clamps Feature Unitized Construction Which Minimized Part Number Complexity And Maximizes Material Efficiency For Reduced Weight..
Note: Please Check The Size Of The Prouducts Pictures,Type And Shape To Make Sure The Item Is The One That You Need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service !.
Easy To Install:Butt Joint Band Clamps Is A Simple, Effective Way To Connect Exhaust System Components Such As Pipes, Mufflers And Catalytic Converters. Unique Seal And High Clamp Loads Are Provided Without Distorting Your Exhaust Components, Allowing The Flexibility To Disassemble For Service..
Universal Fitment.Joins Joins 2.5" Od Pipe To 2.5" Id Pipe, Made Of 304 Stainless Steel. Besides, We Also Provide 4 Different Sizes To Fulfill Your Needs. You Would Better Measure Before Pruchase..
Features
- HIGH QUALITY ---- Our 2.5inch exhaust band clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water.
- Universal fitment.Joins Joins 2.5 OD Pipe to 2.5 ID Pipe, made of 304 stainless steel. Besides, we also provide 4 different sizes to fulfill your needs. You would better measure before pruchase.
- These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.
- Easy to install:Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.
- NOTE: Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service !
- See more on Amazon...
Brand: LEDAUT | Manufacturer: LEDAUT
See On Amazon #5
Walker 54129 Exhaust Pipe 2.5" Inlet (ID) 2.5" Outlet (OD) for Ford F-150
Asin: B000C93DTO | Model: 54129 | PartNumber: 54129 | Ean: 0086387541299 | UPC: 086387541299
Inhibits Corrosion -- Durable Aluminized-Steel Construction To Inhibit Corrosion And Promote Performance.
Available In Different Sizes -- Offered In A Variety Of Lengths And Diameters And Features The Appropriate Inlet Diameter (I.D.) - Outlet Diameter (O.D.) Connection; See Product Specifications For More Information.
Oe-Style Performance -- Direct-Fit Design Is Fixture Checked To Ensure A Precise Fit That Performs Like Original Equipment.
Better Together -- Use Premium Walker Accessories When Installing Walker Catalytic Converters And Mufflers For A Complete Exhaust System Upgrade.
Easy To Install -- Manufactured With Precision Bends And Oe-Style Routings, Hangers And Connectors For Easy Installation (Where Applicable).
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 2004-2004 Ford F-150 Heritage; 1997-1997 Ford F-150; 1998-1998 Ford F-150; 1999-1999 Ford F-150; 2000-2000 Ford F-150; 2001-2001 Ford F-150; 2002-2002 Ford F-150; 2003-2003 Ford F-150
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- INHIBITS CORROSION -- Durable aluminized-steel construction to inhibit corrosion and promote performance
- EASY TO INSTALL -- Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE -- Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) - Outlet Diameter (O.D.) connection; see product specifications for more information
- See more on Amazon...
First Available: 11/14/2013
Brand: Walker | Manufacturer: Walker Exhaust
Dimensions: 2.50 x 38.00 x 2.50 Inches | Weight: 5.18 Pounds
Warranty: No Warranty
See On Amazon #6
FOMIUZY High Flow Front Catalytic Converter Kit Direct-Fit Chevy Equinox GMC Terrain 2010 2011 2012 2013 2014 Captiva Sport 2012 2013 2014 2015 2.4L
Asin: B0BDBQ9CZB | Model: 2010-2014 Equinox | PartNumber: 2010-2014 Equinox | Ean: 0791988367260 | UPC: 791988367260
【High Quality】: The Stainless Steel Body Of High-Quality Aluminized Pipes Is Not Easy To Rust, Ensuring Excellent Oxygen Storage Capacity And Long Service Life. The Double-Layer High Temperature Resistant Ceramic Carrier Greatly Increases The Flow Rate And Surface Area, Thereby Improving Power And Fuel Economy. Replace With A New Catalytic Converter To Provide You With Excellent Clean Air Performance, Restore The Quietness Of The Vehicle, And Restore A Good Driving Experience For You.
【Buy With Confidence】：Our Catalytic Converter Has A Lifetime Warranty. If The Part Fails Or Breaks, Please Contact Us For Replacement. Save Hundreds Of Dollars Off Of Dealer Prices By Purchasing This Part And Taking Advantage Of Our Warranty.Price Concessions And Guaranteed, No Need To Worry About Quality Problems.
【Fits For】: 2010-2014 Chevy Equinox 2.4L | 2010-2014 Gmc Terrain 2.4L | 2012-2015 Captiva Sport 2.4L.
【Direct Replacement】: If Your Engine Throws P0420 Code, Or Your Cat Is Stolen, Then It Is Recommended To Buy This Kit To Solve The Problem. This Catalytic Converter Can Repair Faults And Noise, Car Exhaust Can Be Purified. It Meets Or Exceeds The Oem Standard, And Has Been Tested In The Factory, Perfectly Matched With The Original Car, And Can Be Installed Directly..
Features
- Standards : Our catalytic converters have strict production procedures and comply with EPA standards and Obd3 standards. However, due to the increased emission standards in California, Colorado, New York, and Maine, no sales were carried out in these states (friends in these states, please rest assured, we are developing)
- Direct Replacement : If your engine throws P0420 code, or your cat is stolen, then it is recommended to buy this kit to solve the problem. This catalytic converter can repair faults and noise, car exhaust can be purified. It meets or exceeds the oem standard, and has been tested in the factory, perfectly matched with the original car, and can be installed directly.
- High Quality : The stainless steel body of high-quality aluminized pipes is not easy to rust, ensuring excellent oxygen storage capacity and long service life. The double-layer high temperature resistant ceramic carrier greatly increases the flow rate and surface area, thereby improving power and fuel economy. Replace with a new catalytic converter to provide you with excellent clean air performance, restore the quietness of the vehicle, and restore a good driving experience for you
- Fits For : 2010-2014 Chevy Equinox 2.4L | 2010-2014 GMC Terrain 2.4L | 2012-2015 Captiva Sport 2.4L
- Buy With Confidence Our catalytic converter has a lifetime warranty. If the part fails or breaks, please contact us for replacement. Save hundreds of dollars off of dealer prices by purchasing this part and taking advantage of our warranty.Price concessions and guaranteed, no need to worry about quality problems
- See more on Amazon...
Brand: FOMIUZY | Manufacturer: FOMIUZY
Warranty: 99999
See On Amazon #7
Walker 41724 Exhaust Pipe 2.5" Inlet (ID) 2" Outlet (ID)
Asin: B0015KZL1M | Model: 41724 | PartNumber: 41724 | Ean: 0086387417242 | UPC: 086387417242
The Right Connection -- For Connecting Exhaust Pipe And/Or Tubing.
Quality Materials -- Made From Aluminized Steel For Durability And Long Life.
Better Together -- Use Quality Walker Accessories When Installing Walker Catalytic Converters And Mufflers For A Complete Exhaust System Upgrade.
Smooth Finish -- Burr-Free Construction For Proper Fitment.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Universal fit, check product dimensions
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- THE RIGHT CONNECTION -- For connecting exhaust pipe and/or tubing
- SMOOTH FINISH -- Burr-free construction for proper fitment
- QUALITY MATERIALS -- Made from aluminized steel for durability and long life
- BETTER TOGETHER -- Use quality Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- See more on Amazon...
First Available: 11/14/2013
Brand: Walker | Manufacturer: Walker Exhaust
Dimensions: 2.00 x 6.00 x 2.00 inches | Weight: 0.50 Pounds
Warranty: No Warranty
See On Amazon #8
Walker 41726 Exhaust Pipe 3" Inlet (ID) 2.5" Outlet (ID)
Asin: B0015KZL26 | Model: 41726 | PartNumber: 41726 | Ean: 0086387417266 | UPC: 086387417266
The Right Connection -- For Connecting Exhaust Pipe And/Or Tubing.
Quality Materials -- Made From Aluminized Steel For Durability And Long Life.
Better Together -- Use Quality Walker Accessories When Installing Walker Catalytic Converters And Mufflers For A Complete Exhaust System Upgrade.
Smooth Finish -- Burr-Free Construction For Proper Fitment.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Universal fit, check product dimensions
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- THE RIGHT CONNECTION -- For connecting exhaust pipe and/or tubing
- SMOOTH FINISH -- Burr-free construction for proper fitment
- QUALITY MATERIALS -- Made from aluminized steel for durability and long life
- BETTER TOGETHER -- Use quality Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- See more on Amazon...
First Available: 11/14/2013
Brand: Walker | Manufacturer: Walker Exhaust
Dimensions: 4.00 x 6.00 x 4.00 inches | Weight: 1.10 Pounds
Warranty: No Warranty
See On Amazon #9
10Pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Removal Kit
Asin: B07V36G9MY | Ean: 0793345497795 | UPC: 793345497795
Built To Last: Constructed Of Heat-Treated Chrome Vanadium Steel, This Oxygen Sensor Remover Set Is Built For Strength, Durability, And Longevity; Each 02 Sensor Socket Is Coated With A Black Oxide Finish To Provide Resistance To Rust And Corrosion.
Convenient Storage: The Plastic Blow-Molded Case Is Included To Provide Safe Storage, Fast Organization, And Easy Transportation; Case Measures At 11.8 X 9.8 X 2.5 Inches (29.9 X 24.9 X 6.3 Cm) And Features Locking Latches And A Comfortable Handle.
Contents: This Specialty Tools Set Includes 10 Pieces: 1/2 Inch Dr X 22Mm X 6Pt X 110Mm, 1/2 Inch Dr X 29Mm X 6Pt X 90Mm, 1/2 Inch Dr X 22Mm X 12Pt X 78Mm, 1/2 Inch Dr X 27Mm X 12Pt X 78Mm, 1/2 Inch Dr X 28Mm X 12Pt X 78Mm, 1/2 Inch Dr X 7/8” X 50Mm, 3/8 Inch Dr X 7/8” X 6Pt X 80Mm, 3/8 Inch Dr X 7/8” X 6Pt X 90Mm, 3/8 Inch Dr X 7/8” X 30Mm, And 3/8 Inch Dr X 1” And 1-1/6” X 74Mm.
Use With Your Tools: Features 3/8-Inch Or 1/2-Inch Square Drive To Fit Your O2 Sensor Wrench Drives; For Use With Ratchet, Breaker Bar, Or Hand Wrench (Driver Tools Not Included); Not Compatible With Impact Tools; Use This Tool In Conjunction With The O2 Sensor Thread Chasers To Install New Sensors Easily (Thread Chaser And Sensors Not Included).
Features
- REMOVE OXYGEN SENSORS FROM YOUR VEHICLE: This 10 Piece Specialty Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches; Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes; Remove and install parts on most domestic and some international vehicles
- USE WITH YOUR TOOLS: Features 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives; For use with ratchet, breaker bar, or hand wrench (driver tools not included); Not compatible with impact tools; Use this tool in conjunction with the O2 Sensor Thread Chasers to install new sensors easily (thread chaser and sensors not included)
- BUILT TO LAST: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity; Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion
- CONTENTS: This specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8 x 50mm, 3/8 inch dr x 7/8 x 6PT x 80mm, 3/8 inch dr x 7/8 x 6PT x 90mm, 3/8 inch dr x 7/8 x 30mm, and 3/8 inch dr x 1 and 1-1/6 x 74mm
- CONVENIENT STORAGE: The plastic blow-molded case is included to provide safe storage, fast organization, and easy transportation; Case measures at 11.8 x 9.8 x 2.5 inches (29.9 x 24.9 x 6.3 cm) and features locking latches and a comfortable handle
- See more on Amazon...
Brand: DAYUAN | Manufacturer: Yinyuan tools
See On Amazon #10
CMTOOL Exhaust Back Pressure Tester Kit with Carrying Case, Exhaust Back Pressure Gauge with 6-Foot Hose, Exhaust Pressure Tester, Automotive Back Pressure Tester, Car Exhaust Back Pressure Gauge Kit
Asin: B09SYZPPJ4 | Ean: 0661706277600 | UPC: 661706277600
3.【Easy To Operate】The Adapter In The Exhaust Back Pressure Gauge Kit Is M12 And M18 Thread. The Tester Is Tested At Idle And 2500Rpm. The Pressure Should Be Lower Than 1.25Psi At Idle, And Lower Than 3Psi At 2500Rpms..
5.【Important Hint】The Gauge Has Been Checked And Calibrated To Ensure Accurate Test Results. If The Gauge Pointer Is Not In The Initial State "0", It May Be That The Gauge Has Been Impacted During Transportation. In This Case, You Can Disassemble The Cover And Adjust The Pointer To "0", Without Affecting The Test Results..
6.【24-Hour Service And 3-Year Warranty】We Offer 24-Hour Friendly Customer Service And A 36-Month Free Warranty For This Exhaust Back Pressure Gauge Kit To Ensure Your Shopping Experience. If You Have Any Questions About This Exhaust Pressure Tester Tool, Please Feel Free To Contact Us!.
4.【High Definition Gauge & Protective Rubber Cover】The Gauge (2.5 Inches) Of The Exhaust Pressure Tester Has 2 Pressure Units (Psi And Bar) And 3 Colors To Indicate Good Or Bad Status, Highly Visible Markings Help You Quickly And Accurately Determine The Condition Of The Vehicle's Exhaust System. The Gauge Is Also Equipped With A Shockproof Rubber Protective Cover, Which Is Comfortable To Handle And Prevents The Gauge From Being Damaged Due To Falling..
2.【High Temperature Resistant Hose】The 6Ft Hose Allows The User To Test From The Driver's Seat, Making Your Repairs Easier And Saving You Time And Energy. The Hose Is Made Of Special Thickened Silicone Material, Which Is Not Only Wear-Resistant But Also High Temperature Resistant About 300°C, Fully Meeting Your Needs..
Features
- 1. Carrying Case Design Thanks to its custom-molded red carrying case, you can easily organize every piece of this set in an orderly manner, ready for your next job. The kit can also be protected during storage to avoid damage or loss.
- 2. High Temperature Resistant Hose The 6ft hose allows the user to test from the driver's seat, making your repairs easier and saving you time and energy. The hose is made of special thickened silicone material, which is not only wear-resistant but also high temperature resistant about 300 C, fully meeting your needs.
- 3. Easy to Operate The adapter in the exhaust back pressure gauge kit is M12 and M18 thread. The tester is tested at idle and 2500rpm. The pressure should be lower than 1.25psi at idle, and lower than 3psi at 2500rpms.
- 4. High Definition Gauge & Protective Rubber Cover The gauge (2.5 inches) of the exhaust pressure tester has 2 pressure units (PSI and bar) and 3 colors to indicate good or bad status, highly visible markings help you quickly and accurately determine the condition of the vehicle's exhaust system. The gauge is also equipped with a shockproof rubber protective cover, which is comfortable to handle and prevents the gauge from being damaged due to falling.
- 5. Important Hint The gauge has been checked and calibrated to ensure accurate test results. If the gauge pointer is not in the initial state 0, it may be that the gauge has been impacted during transportation. In this case, you can disassemble the cover and adjust the pointer to 0, without affecting the test results.
- 6. 24-Hour Service and 3-Year Warranty We offer 24-hour friendly customer service and a 36-month free warranty for this exhaust back pressure gauge kit to ensure your shopping experience. If you have any questions about this exhaust pressure tester tool, please feel free to contact us!
- See more on Amazon...
Brand: CMTOOL | Manufacturer: CMTOOL
Dimensions: 2.48 x 12.80 x 10.71 inches | Weight: 2.60 pounds
Warranty: 3 year
See On Amazon #11
FOMIUZY 2.5 Inch Inlet/Outlet Universal High Flow Front Catalytic Converter Direct-Fit with O2 Port(EPA Compliant)
Asin: B09Y911V1Q | Model: 2.5 wqpf | PartNumber: 2.5 wqpf | Ean: 0791974402074 | UPC: 791974402074
【Specification】: 2.5" Inlet , 2.5" Outlet , 11" Overall Length.Please Check Whether Your Vehicle Exhaust Has The Appropriate Size Before Purchasing To Make Sure That The Standard Universal Exhaust Is Suitable For Your Car.
【Buy With Confidence】：Our Catalytic Converter Tube Pipe Assembly Has A Lifetime Warranty. If The Part Fails Or Breaks, Please Contact Us For Replacement. Save Hundreds Of Dollars Off Of Dealer Prices By Purchasing This Part And Taking Advantage Of Our Warranty.Price Concessions And Guaranteed, No Need To Worry About Quality Problems.
【Standards】: Our Catalytic Converters Have Strict Production Procedures And Comply With Epa Standards And Obd3 Standards. However, Due To The Increased Emission Standards In California, Colorado, New York, And Maine, No Sales Were Carried Out In These States (Friends In These States, Please Rest Assured, We Are Developing).
【High Quality】: The Stainless Steel Body Of High-Quality Aluminized Pipes Is Not Easy To Rust, Ensuring Excellent Oxygen Storage Capacity And Long Service Life. The Double-Layer High Temperature Resistant Ceramic Carrier Greatly Increases The Flow Rate And Surface Area, Thereby Improving Power And Fuel Economy. Replace With A New Catalytic Converter To Provide You With Excellent Clean Air Performance, Restore The Quietness Of The Vehicle, And Restore A Good Driving Experience For You.
Features
- Direct Replacement : If your engine throws P0420 code, or your cat is stolen, then it is recommended to buy this kit to solve the problem. This catalytic converter can repair faults and noise, car exhaust can be purified. It meets or exceeds the oem standard, and has been tested in the factory, perfectly matched with the original car, and can be installed directly.
- High Quality : The stainless steel body of high-quality aluminized pipes is not easy to rust, ensuring excellent oxygen storage capacity and long service life. The double-layer high temperature resistant ceramic carrier greatly increases the flow rate and surface area, thereby improving power and fuel economy. Replace with a new catalytic converter to provide you with excellent clean air performance, restore the quietness of the vehicle, and restore a good driving experience for you
- Specification : 2.5 Inlet , 2.5 Outlet , 11 Overall Length.Please check whether your vehicle exhaust has the appropriate size before purchasing to make sure that the standard universal exhaust is suitable for your car
- Standards : Our catalytic converters have strict production procedures and comply with EPA standards and Obd3 standards. However, due to the increased emission standards in California, Colorado, New York, and Maine, no sales were carried out in these states (friends in these states, please rest assured, we are developing)
- Buy With Confidence Our catalytic converter tube pipe assembly has a lifetime warranty. If the part fails or breaks, please contact us for replacement. Save hundreds of dollars off of dealer prices by purchasing this part and taking advantage of our warranty.Price concessions and guaranteed, no need to worry about quality problems
- See more on Amazon...
Brand: FOMIUZY | Manufacturer: FOMIUZY
Weight: 5.73 pounds
See On Amazon #12
Exhaust Adapter Connector 2.5" ID to 3" ID, A-KARCK Exhaust Pipe Reducer 4" Overall Length 304 Stainless Steel
Asin: B089QG6P19 | Model: 2525A | PartNumber: 2525A | Ean: 0883343477384 | UPC: 883343477384
The Overall Length Is 4 Inch And The Thickness Is 1.3Mm..
The Adapter Eliminates The Gap And Achieves A Nice Transition From 2.5" To 3". (Please Check The Detailed Size Before Purchasing).
Made Of 304 Stainless Steel, Welds To Two Metal Pipes Of Different Diameters Can Form A Tight Seal Against Leaks..
Large Diameter: 3" Id (Fits 3" Outer Diameter Component).
Features
- Small diameter: 2.5" ID (Fits 2.5" outer diameter pipe)
- Large diameter: 3 ID (Fits 3 outer diameter component)
- The overall length is 4 inch and the thickness is 1.3mm.
- Made of 304 stainless steel, welds to two metal pipes of different diameters can form a tight seal against leaks.
- The adapter eliminates the gap and achieves a nice transition from 2.5 to 3. (Please check the detailed size before purchasing)
- See more on Amazon...
Brand: A-KARCK | Manufacturer: A-KARCK
Dimensions: 3.00 x 4.00 x 3.00 inches
Warranty: 1 year warranty
See On Amazon #13
A-KARCK 2.5" Inlet Exhaust Resonator, 2.5" Inlet 2.5" Outlet 11.5" Overall Length Muffler Resonator Stainless Steel Polished
Asin: B082F125B4 | Model: New254009 | PartNumber: New254009 | Ean: 0883343605565 | UPC: 883343605565
After Installing The Resonator Will Get A Nice Deep, Throaty Tone..
Stainless Steel Construction Provides Long-Lasting Durability..
Straight Through Design, Allows For The Highest Flow Possible..
Designed To Dampen Exhaust Noise And Clear Up The Rasp..
Features
- 2.5" inner diameter inlet, 2.5" inner diameter outlet, 11.5" overall length, 4" round body width.
- Designed to dampen exhaust noise and clear up the rasp.
- After installing the resonator will get a nice deep, throaty tone.
- Straight through design, allows for the highest flow possible.
- Stainless steel construction provides long-lasting durability.
- See more on Amazon...
Brand: A-KARCK | Manufacturer: A-KARCK
Dimensions: 4.00 x 11.50 x 4.00 Inches
See On Amazon #14
Exhaust Band Clamp 2.5 Inch Joint Exhaust Pipe Muffler Clamp Band 304 Stainless Steel(4 Pack 2.5" Lap Joint Exhaust Clamp)
Asin: B09X2SMGRF
These Exhaust Clamps Feature Unitized Construction Which Minimized Part Number Complexity And Maximizes Material Efficiency For Reduced Weight..
Ote: Please Check The Size Of The Prouducts Pictures,Type And Shape To Make Sure The Item Is The One That You Need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service !.
Easy To Install, Our Joint Band Clamps Is A Simple, Effective Way To Connect Exhaust System Components Such As Pipes, Mufflers And Catalytic Converters. Unique Seal And High Clamp Loads Are Provided Without Distorting Your Exhaust Components, Allowing The Flexibility To Disassemble For Service..
Universal Fitment, Joins Joins 2.5" Od Pipe To 2.5" Id Pipe. Besides, We Also Provide Other Different Sizes To Fulfill Your Needs. You Would Better Measure Before Pruchase..
Features
- Our 2.5inch exhaust band clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water.
- Universal fitment, Joins Joins 2.5 OD Pipe to 2.5 ID Pipe. Besides, we also provide other different sizes to fulfill your needs. You would better measure before pruchase.
- These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.
- Easy to install, Our joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.
- OTE: Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service !
- See more on Amazon...
Brand: Shineyoo | Manufacturer: Shineyoo
See On Amazon #15
YITAMOTOR Catalytic Converter Compatible with Chevy Silverado GMC Sierra 1500 1999 2000 2001 2002 2003 2004 2005 2006 Avalanche Suburban Tahoe Yukon XL Cadillac Escalade 4.3L 4.8L 5.3L (EPA Compliant)
Asin: B0B6JF43CG | Model: MAYIM0000150MA | PartNumber: MAYIM0000150MA | Ean: 0840265294796 | UPC: 840265294796
Brand: YITAMOTOR | Manufacturer: YITAMOTOR
Warranty: 5 years or 50,000 miles limited warranty
See On Amazon #16
FOMIUZY High Flow Front Catalytic Converter Kit Direct-Fit Nissan Altima 2007 2008 2009 2010 2011 2012 2013 2.5L Replaces 674-933 140E2-ZX31E(EPA Compliant)
Asin: B09Y92PKML | Model: wqpf Altima 2007-2013 | PartNumber: wqpf Altima 2007-2013 | Ean: 0791974402098 | UPC: 791974402098
【Fits For】: 2007-2013 Nissan Altima 2.5L.
【Buy With Confidence】：Our Catalytic Converter Has A Lifetime Warranty. If The Part Fails Or Breaks, Please Contact Us For Replacement. Save Hundreds Of Dollars Off Of Dealer Prices By Purchasing This Part And Taking Advantage Of Our Warranty.Price Concessions And Guaranteed, No Need To Worry About Quality Problems.
【Standards】: Our Catalytic Converters Have Strict Production Procedures And Comply With Epa Standards And Obd3 Standards. However, Due To The Increased Emission Standards In California, Colorado, New York, And Maine, No Sales Were Carried Out In These States (Friends In These States, Please Rest Assured, We Are Developing).
【High Quality】: The Stainless Steel Body Of High-Quality Aluminized Pipes Is Not Easy To Rust, Ensuring Excellent Oxygen Storage Capacity And Long Service Life. The Double-Layer High Temperature Resistant Ceramic Carrier Greatly Increases The Flow Rate And Surface Area, Thereby Improving Power And Fuel Economy. Replace With A New Catalytic Converter To Provide You With Excellent Clean Air Performance, Restore The Quietness Of The Vehicle, And Restore A Good Driving Experience For You.
Features
- Direct Replacement : If your engine throws P0420 code, or your cat is stolen, then it is recommended to buy this kit to solve the problem. This catalytic converter can repair faults and noise, car exhaust can be purified. It meets or exceeds the oem standard, and has been tested in the factory, perfectly matched with the original car, and can be installed directly.
- High Quality : The stainless steel body of high-quality aluminized pipes is not easy to rust, ensuring excellent oxygen storage capacity and long service life. The double-layer high temperature resistant ceramic carrier greatly increases the flow rate and surface area, thereby improving power and fuel economy. Replace with a new catalytic converter to provide you with excellent clean air performance, restore the quietness of the vehicle, and restore a good driving experience for you
- Fits For : 2007-2013 Nissan Altima 2.5L
- Standards : Our catalytic converters have strict production procedures and comply with EPA standards and Obd3 standards. However, due to the increased emission standards in California, Colorado, New York, and Maine, no sales were carried out in these states (friends in these states, please rest assured, we are developing)
- Buy With Confidence Our catalytic converter has a lifetime warranty. If the part fails or breaks, please contact us for replacement. Save hundreds of dollars off of dealer prices by purchasing this part and taking advantage of our warranty.Price concessions and guaranteed, no need to worry about quality problems
- See more on Amazon...
Brand: FOMIUZY | Manufacturer: FOMIUZY
See On Amazon #17
WaSaett 2.5" Catalytic Converter Universal 2.5 Inch Inlet/Outlet Universal High Flow Front Catalytic Converter with O2 Port Direct-Fit (EPA Compliant)
Asin: B0BPM3P8JG | Model: A410250 | PartNumber: A410250
High Conversion Efficiency: Catalytic Converter Features Internal Honeycomb Ceramic Substrates With A Porous Structure, Maximizing The Reaction Area And Catalysts On The Coating Surface.This Ensures A Higher Conversion Rate Of Harmful Emissions Into Less Harmful Substances, Reducing Environmental Impact..
Exceptional Warranty And Customer Support: We Stand Behind The Quality Of Our Product And Offer A 2-Year/50,000-Mile Warranty.In The Unlikely Event That You Encounter Any Issues, Our Knowledgeable Customer Support Team Is Ready To Assist You. Purchase With Confidence Knowing That We Have Your Back..
Durable Construction: Crafted From Highly Corrosion-Resistant Stainless Steel, Our Catalytic Converter Offers Exceptional Durability.It Is Built To Withstand Extreme Conditions And Will Not Bend Or Melt. With Consistently Perfect Fitment And Superior Longevity, You Can Trust In The Reliability Of Our Product..
Wide Compatibility: Universal Catalytic Converter Is Specially Designed To Fit A Variety Of Vehicles With Similar Od Size Exhaust Pipes. Its Standard Outside Diameter 2.5 Inch Inlet/Outlet And 11 Inch Overall Length Make It Widely Applicable. Ensure Compatibility With Your Vehicle Before Purchase..
Features
- Attention: This item doesn't ship to California & Colorado & New York, please confirm before purchase.
- Wide Compatibility: universal catalytic converter is specially designed to fit a variety of vehicles with similar OD size exhaust pipes. Its standard Outside diameter 2.5 inch inlet/outlet and 11 inch overall length make it widely applicable. Ensure compatibility with your vehicle before purchase.
- High Conversion Efficiency: catalytic converter features internal honeycomb ceramic substrates with a porous structure, maximizing the reaction area and catalysts on the coating surface.This ensures a higher conversion rate of harmful emissions into less harmful substances, reducing environmental impact.
- Durable Construction: Crafted from highly corrosion-resistant stainless steel, our catalytic converter offers exceptional durability.It is built to withstand extreme conditions and will not bend or melt. With consistently perfect fitment and superior longevity, you can trust in the reliability of our product.
- Exceptional Warranty and Customer Support: We stand behind the quality of our product and offer a 2-year/50,000-mile warranty.In the unlikely event that you encounter any issues, our knowledgeable customer support team is ready to assist you. Purchase with confidence knowing that we have your back.
- See more on Amazon...
Brand: WaSaett | Manufacturer: WaSaett
Warranty: 2 Year/50,000-mile warranty
See On Amazon #18
bylikeho Exhaust Clamp,Car Accessories 4" 3" 2.5" 5" 3.5" 2.75" Lap Joint Exhaust Band Clamp Sleeve Coupler,Stainless Steel Exhaust Pipe Clamp for Exhaust System,Exhaust Tubing Connection (2.5")
Asin: B0CX53FG55 | Model: 1421DJPQGJ001 | PartNumber: 1421DJPQGJ001
[Features] These Exhaust Clamps Adopt An Integrated Structure, Minimizing The Complexity Of The Number Of Parts And Maximizing Material Efficiency, Thereby Reducing Weight. 12.9 Degree High-Strength Fasteners Provide True Sealing Force, And The Unique Reaction Block Provides 360 ° Uniformly Distributed Tensile Force, Completing Sealing Around The Connected Exhaust Components While Preventing Pipeline Deformation..
[Application] Lap Clamps Are A Simple And Effective Method For Connecting Exhaust System Components Such As Pipes, Silencers, Catalytic Converters, Etc. Widely Used Exhaust Systems In The Automotive, Commercial Vehicle, And Off-Road Industries..
[Easy To Install]The Exhaust Clamp Is Easy To Install Or Remove, And The Double-Layer Self-Locking Locking Washer Can Prevent The Nut From Loosening. Fast, Simple, And Accurate, While Minimizing Noise And Exhaust Leakage..
[High Quality Materials]The Exhaust Pipe Clamp Is Made Of High-Quality 304 Stainless Steel And Galvanized, Which Can Resist Water Corrosion And Rust, Is Durable, And Has A Long Service Life..
Features
- [Multiple Sizes]We have 6 different sizes of exhaust clips for you to choose from: 4" 3" 2.5 "5" 3.5" 2.75", you can purchase according to your needs.
- [High Quality Materials]The exhaust pipe clamp is made of high-quality 304 stainless steel and galvanized, which can resist water corrosion and rust, is durable, and has a long service life.
- [Features] These exhaust clamps adopt an integrated structure, minimizing the complexity of the number of parts and maximizing material efficiency, thereby reducing weight. 12.9 degree high-strength fasteners provide true sealing force, and the unique reaction block provides 360 uniformly distributed tensile force, completing sealing around the connected exhaust components while preventing pipeline deformation.
- [Easy to Install]The exhaust clamp is easy to install or remove, and the double-layer self-locking locking washer can prevent the nut from loosening. Fast, simple, and accurate, while minimizing noise and exhaust leakage.
- [Application] Lap clamps are a simple and effective method for connecting exhaust system components such as pipes, silencers, catalytic converters, etc. Widely used exhaust systems in the automotive, commercial vehicle, and off-road industries.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
See On Amazon #19
2.5 Inch Butt Joint Exhaust Clamp,Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel 2.5" 2 1/2 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel(2.5 Inch,2Pcs)
Asin: B0BBF3HZ88 | Model: 2.5 Inch,2Pcs | PartNumber: 2.5 Inch,2Pcs
【Easy To Install】Stainless Steel Butt Joint Exhaust Band Clamp-Easy And Less Time Consuming To Install Or Remove With One Bolt. Features T-304 Band Stainless Steel And Aluminized Steel Hardware.The Band Clamp Is A Wide Strap Of Metal, Typically Stainless, Which Wraps Around The Exhaust Pipe Joint..
【Clamp Material】 : Stainless Steel. 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp,Perfect For Catback Exhausts, Mufflers, Downpipes, Headers, Manifolds.The Items Are The Same As The Pictures.We Provide Carefree Return, Our Aim At Pursuing The Maximum Satisfaction Of Our Buyers!.
【Package Includes 】Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel (2.5 Inch,2Pcs).2.5 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel.Distributes The Clamping Force Evenly Over The Entire 360° To Prevent Leaks And Control Material Distortion..
【2.5 Inch Butt Joint Exhaust Clamp】Butt-Joint Clamps Are A Good Choice When Cosmetic Appearance Is Important. This Type Of Clamp Is For Connecting Two Pipes That Have The Same Outside Diameter..
Features
- Flexibility 2.5 Butt joint exhaust clamp,Joins 2.5" OD pipe to 2.5" OD pipe, Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Butt joint clamp 2.5,Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.
- 2.5 Inch butt joint exhaust clamp Butt-joint clamps are a good choice when cosmetic appearance is important. This type of clamp is for connecting two pipes that have the same outside diameter.
- Easy To Install Stainless Steel Butt Joint Exhaust Band Clamp-Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware.The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint.
- Package Includes Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel (2.5 Inch,2Pcs).2.5 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel.Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion.
- Clamp material : Stainless Steel. 2.5 inch 2 1/2 butt joint exhaust band clamp,Perfect for Catback Exhausts, Mufflers, Downpipes, Headers, Manifolds.The items are the same as the pictures.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers!
- See more on Amazon...
Brand: CALU LUKY | Manufacturer: OEM
Dimensions: 1.00 x 4.00 x 3.00 inches
See On Amazon #20
Mophorn Catalytic Converter Compatible with 1998-2002 Honda Accord 2.3L, Direct-Fit High Flow Series Cat Converter, Stainless Steel Exhaust Converter Pipe w/Flange Design & Gasket (OBD III Compliant)
Asin: B07F9QTKTC | Model: ATCC9802 | PartNumber: ATCC9802 | Ean: 0601707158737 | UPC: 601707158737
【Flange To Flange Install】- The High Flow Catalytic Converter Has Standard Specification Flanges Designed For Easy Installation. Direct Bolts Exist In The Exhaust System Without Extra Modification. The Kit Also Comes With Gaskets And Hardware For Completing The Replacement. Professional Installation Is Highly Recommended For Exerting Its Max Capability..
【Vehicle Compatibility】- The Complete Set High Flow Converter Replaced On The Vehicle Of Left/ Right/ Front/ Rear Part. It May Require Welding And Cutting, And Is Compatible With 1998 1999 2000 2001 2002 Honda Accord 2.3L..
【Standard Obd Iii Compliant】- This Free-Flow Catalytic Converter Is Compliant With Obd Iii Standards To Ensure The Exhaust Emissions Meet The Federal Emission Standards But Is Illegal To Be Used In California As The Non-Carb Compliant..
【Stainless Steel Structure】- The Exhaust Header Set With A Stainless Steel Body Can Endure High-Temper Gases From The Exhaust. Its Internal Ceramic Substrates Contain High-Load Precious Metal Catalysts Like Pt, Rh, Pd To Enhance Purification Efficiency And Intensity..
Features
- OEM HIGH FLOW DESIGN - This catalytic converter is constructed to meet or even exceed OEM quality. Its high flow design can provide more oxygen to your engine for excellent performance, dramatically improving your exhaust system.
- STAINLESS STEEL STRUCTURE - The exhaust header set with a stainless steel body can endure high-temper gases from the exhaust. Its internal ceramic substrates contain high-load precious metal catalysts like Pt, Rh, Pd to enhance purification efficiency and intensity.
- FLANGE TO FLANGE INSTALL - The high flow catalytic converter has standard specification flanges designed for easy installation. Direct bolts exist in the exhaust system without extra modification. The kit also comes with gaskets and hardware for completing the replacement. Professional installation is highly recommended for exerting its max capability.
- STANDARD OBD III COMPLIANT - This free-flow catalytic converter is compliant with OBD III Standards to ensure the exhaust emissions meet the Federal Emission Standards but is illegal to be used in California as the NON-CARB compliant.
- VEHICLE COMPATIBILITY - The complete set high flow converter replaced on the vehicle of left/ right/ front/ rear part. It may require welding and cutting, and is compatible with 1998 1999 2000 2001 2002 Honda Accord 2.3L.
- See more on Amazon...
Brand: Mophorn | Manufacturer: Mophorn
Dimensions: 5.91 x 16.14 x 6.30 inches
See On Amazon
Looking For Something Else?
Search