Therwen 4 Inch Duct Splitter for Exhaust Fan 3 Way Duct Hose Connector Metal 45 Degree Y Shaped Duct Connector Dryer Vent Hose Split Ventilation Intake Outlet Kitchen and Bathroom Applications
Asin: B0C8SGXZWC
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Quality Material: Made Of Galvanized Sheet With High Strength, Our 4 Inch Duct Connector Features Good Toughness, And Is Easy Processing, Sturdy, Waterproof And Rust Proof, Safe And Non Toxic, Can Be Applied Outdoors And Indoors, Even If Exposed To Sunlight And Rain, It Can Still Serve You For A Long Time.
Easy To Use: The 4 Inch Y Duct Connector Can Be Easily Applied, First You Wipe It Clean, Then Connect It With The Hose And Fix It With Aluminum Foil Tape (Not Included), Finally, Install The Fixture (Not Included) And Tighten The Screws (Not Included); It Is Suitable For Purification System Air Return Pipe, Central Air Conditioning Ventilation Pipe, Industrial Exhaust Ventilation Pipe, Home, Factory Building, Gymnasium, Underground Garage, Theater And Other Places.
Good Workmanship: The Interior Of The Duct Hose Connector Is Smooth, And The Reasonable Radian Reduces The Wind Resistance, At The Same Time, The Air In The Parts Of The Ventilation Project Can Be Exhausted, Bringing Convenience And Saving The Construction Cost; You Can Apply It In Home, Factory Building, Gymnasium, Underground Garage, Theater And Other Places.
Standard Size: The Diameter Of The 3 Holes Of Our Duct Splitter Is About 4 Inches, Which Is Suitable For Hoses With A Diameter Of About 4 Inches/ 10 Cm, The Joint Is Seamlessly Connected, Which Has Good Leakage Prevention Effect, So That No Need To Worry About Air Leakage After Installation; It Is Proper In Size And Takes Up Less Space.
Features
- You Will Get: the package contains 1 piece of ducting pipe y splitter, which can be connected to the exhaust fan, the dryer ventilation cover and the ventilation seal through the dryer ventilation hose to complete your ventilation system
- Standard Size: the diameter of the 3 holes of our duct splitter is about 4 inches, which is suitable for hoses with a diameter of about 4 inches/ 10 cm, the joint is seamlessly connected, which has good leakage prevention effect, so that no need to worry about air leakage after installation; It is proper in size and takes up less space
- Quality Material: made of galvanized sheet with high strength, our 4 inch duct connector features good toughness, and is easy processing, sturdy, waterproof and rust proof, safe and non toxic, can be applied outdoors and indoors, even if exposed to sunlight and rain, it can still serve you for a long time
- Good Workmanship: the interior of the duct hose connector is smooth, and the reasonable radian reduces the wind resistance, at the same time, the air in the parts of the ventilation project can be exhausted, bringing convenience and saving the construction cost; You can apply it in home, factory building, gymnasium, underground garage, theater and other places
- Easy to Use: the 4 inch Y duct connector can be easily applied, first you wipe it clean, then connect it with the hose and fix it with aluminum foil tape (not included), finally, install the fixture (not included) and tighten the screws (not included); It is suitable for purification system air return pipe, central air conditioning ventilation pipe, industrial exhaust ventilation pipe, home, factory building, gymnasium, underground garage, theater and other places
- See more on Amazon...
Brand: Therwen | Manufacturer: Therwen
See On Amazon Similar To Therwen 4 Inch Duct Splitter
#1
Deflecto 4 Duct Connector, Aluminum with Bead and Crimp, Silver, 3 long (DAC4C)
Asin: B001NPANGW | Model: DAC4C | PartNumber: DAC4C | Ean: 0079916002019 | UPC: 079916002019
Designed With A Bead In The Middle To Give Extra Strength To Your Connection, Which Helps Prolong Use.
Constructed Of Fire Resistant Aluminum.
Maximum Working Pressure Of 80 Psi; Maximum Velocity Of 5,000 Fpm; Operating Temperature Range Of -100 To 430 Degrees F.
Crimped Ends Allow For Easy Installation, Simply Slide The Ducts Over Each End And Fasten Into Place.
Features
- For joining together round ducting, our 4 one piece aluminum duct connector is an ideal solution
- Crimped ends allow for easy installation, simply slide the ducts over each end and fasten into place
- Designed with a bead in the middle to give extra strength to your connection, which helps prolong use
- Maximum working pressure of 80 psi; Maximum velocity of 5,000 FPM; Operating temperature range of -100 to 430 degrees F
- Constructed of fire resistant aluminum
- See more on Amazon...
Brand: Deflecto | Manufacturer: Deflect-o Products
Dimensions: 4.00 x 3.00 x 4.00 Inches | Weight: 0.00 pounds
Warranty: AS LISTED
See On Amazon #2
QWORK 4" Duct Splitter, Metal T Shape Joint Duct Connector 3 Way Hose Adapter/Splitter for Exhaust Fans, Dryer Vent Covers, and Vent Seals
Asin: B0CF9XGQP9 | Ean: 0795973614155 | UPC: 795973614155
Efficient Performance: Reduces Wind Resistance, Offers A Good Leakproof Effect, And Saves Space Due To Its Compact Design..
Indoor And Outdoor Compatibility: Our Duct Splitter Is Suitable For Both Indoor And Outdoor Use, Making It Resistant To The Sun And Rain, And Ensuring It Can Withstand Various Weather Conditions..
Versatile Connector Type: T-Shaped Design With A 45-Degree Angle, Suitable For Connecting Exhaust Fans, Dryer Vent Covers, And Vent Seals..
Versatile Connector Type: T-Shaped Design With A 45-Degree Angle, Suitable For Connecting Exhaust Fans, Dryer Vent Covers, And Vent Seals..
Features
- Premium Quality Material: Made from high-quality metal, ensuring durability and long-lasting performance.
- Versatile Connector Type: T-Shaped design with a 45-degree angle, suitable for connecting exhaust fans, dryer vent covers, and vent seals.
- Efficient Performance: Reduces wind resistance, offers a good leakproof effect, and saves space due to its compact design.
- Versatile Connector Type: T-Shaped design with a 45-degree angle, suitable for connecting exhaust fans, dryer vent covers, and vent seals.
- Indoor and Outdoor Compatibility: Our duct splitter is suitable for both indoor and outdoor use, making it resistant to the sun and rain, and ensuring it can withstand various weather conditions.
- See more on Amazon...
Brand: QWORK | Manufacturer: QWORK
See On Amazon #3
MyLifeUNIT 3 Way Duct Connector, Duct Splitter for Exhaust Fan Dryer Vent Hose, 4 Inch Dia. (Y Shape)
Asin: B07K2YKGWB | Model: KT18XH072-A | PartNumber: KT18XH072-A
The Interior Of The Duct Splitter Is Smooth, And Its Reasonable Curvature Greatly Reduces The Wind Resistance. At The Same Time, It Can Discharge Air From Each Part Of The Ventilation Project..
Dryer Vent Hose Has A Diameter Of 3.7 Inches (95 Mm ) Per Interface, Suitable For Hoses Of 4 Inches (100 Mm). Wipe The Tee When Using It, Then Dock It With The Hose And Fix It With Aluminum Foil Tape. Finally, Install The Clamp And Tighten The Screw..
The Dryer Duct Connector Is Seamlessly Connected To Achieve A Good Leakproof Effect. Don't Worry About Leaking Air After Installation. It Is Small In Size, So It Doesn't Take Up Space..
Made Of Premium Pp Plastic, It Is A Material With High Strength, Good Toughness And Easy Processing, No Heavy Metals. It Can Be Used Outdoors And Indoors, Even If It Is Exposed To The Sun And Rain..
Features
- The duct connector is a three-hole connector with two branches. With the dryer vent connector can be connected to exhaust fans, dryer vent covers and vent seals.
- Made of premium PP plastic, it is a material with high strength, good toughness and easy processing, no heavy metals. It can be used outdoors and indoors, even if it is exposed to the sun and rain.
- The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air from each part of the ventilation project.
- The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in size, so it doesn't take up space.
- Dryer vent hose has a diameter of 3.7 inches (95 mm ) per interface, suitable for hoses of 4 inches (100 mm). Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. Finally, install the clamp and tighten the screw.
- See more on Amazon...
Brand: MyLifeUNIT | Manufacturer: MyLifeUNIT
Dimensions: 3.77 x 6.96 x 6.18 Inches | Weight: 0.24 pounds
See On Amazon #4
4'' Inch Duct Splitter for Exhaust Fan Dryer Vent Hose 3 Way Duct Hose Connector, Y Shape, Y Joint Metal (4'' Inch, Y Shape)
Asin: B086QY2ZCM | Ean: 7427046529525
The Interior Of The Duct Splitter Is Smooth, And Its Reasonable Curvature Greatly Reduces The Wind Resistance. At The Same Time, It Can Discharge Air From Each Part In The Ventilation Project..
The Use Of Our 3 Way Duct Connector Saves On Construction Costs And Significantly Reduces The Overall Cost Compared To Conventional Cast Iron Connector Of The Same Specification..
The Dryer Duct Connector Is Seamlessly Connected To Achieve A Good Leakproof Effect. Don't Worry About Leaking Air After Installation. It Is Small In Size, So It Doesn't Take Up Space..
Made Of High Quality Metal, It Is A Material With High Strength, Good Toughness And Easy Processing. With The Features Of Environmentally Friendly, Safe And Non-Toxic. It Can Be Used Outdoors And Indoors, Even If It Is Exposed To The Sun And Rain. This Connector Is Durable And Long Lasting..
Features
- This is a three-hole connector with two branches. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals.
- Made of high quality Metal, it is a material with high strength, good toughness and easy processing. With the features of environmentally friendly, safe and non-toxic. It can be used outdoors and indoors, even if it is exposed to the sun and rain. This connector is durable and long lasting.
- The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air from each part in the ventilation project.
- The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in size, so it doesn't take up space.
- The use of our 3 way duct connector saves on construction costs and significantly reduces the overall cost compared to conventional cast iron connector of the same specification.
- See more on Amazon...
Brand: Repa Market | Manufacturer: Repa Market
Dimensions: 3.93 x 10.61 x 9.90 inches | Weight: 0.44 Kilograms
See On Amazon #5
4'' Inch Duct Splitter to 45 Degree 4" Inch Branch for Exhaust Fan, Dryer Vent Hose - 3 Way Duct Hose Connector, Wye Shape, Ducting Adapter, 4x4x4 Splitter
Asin: B084CXPHHB | Model: TV100-100 | PartNumber: TV100-100 | Ean: 7427046530088
The Interior Of The Duct Splitter Is Smooth, And Its Reasonable Curvature Greatly Reduces The Wind Resistance. At The Same Time, It Can Discharge Air From Each Part In The Ventilation Project..
The Use Of Our 3 Way Duct Connector Saves On Construction Costs And Significantly Reduces The Overall Cost Compared To Conventional Cast Iron Connector Of The Same Specification..
The Dryer Duct Connector Is Seamlessly Connected To Achieve A Good Leakproof Effect. Don't Worry About Leaking Air After Installation. It Is Small In Size, So It Doesn't Take Up Space..
Made Of High Quality Metal, It Is A Material With High Strength, Good Toughness And Easy Processing. With The Features Of Environmentally Friendly, Safe And Non-Toxic. It Can Be Used Outdoors And Indoors, Even If It Is Exposed To The Sun And Rain. This Connector Is Durable And Long Lasting..
Features
- This is a three-way connector with one branch. Main duct diameter is 3.94" Inches. Branch diameter is 3.94" Inches. Branch angle: 45 Degrees. With a dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals.
- Made of high quality Metal, it is a material with high strength, good toughness and easy processing. With the features of environmentally friendly, safe and non-toxic. It can be used outdoors and indoors, even if it is exposed to the sun and rain. This connector is durable and long lasting.
- The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air from each part in the ventilation project.
- The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in size, so it doesn't take up space.
- The use of our 3 way duct connector saves on construction costs and significantly reduces the overall cost compared to conventional cast iron connector of the same specification.
- See more on Amazon...
Brand: Repa Market | Manufacturer: Repa Market
Dimensions: 3.93 x 10.61 x 8.41 Inches | Weight: 0.52 Kilograms
See On Amazon #6
ZHUOMINGJIA 3 Way Y Shape Duct Connector, ABS Duct Splitter for Exhaust Fan Dryer Vent Hose,4 Inch Dia with 3 PCS Hose Clamps (ABS,4 inches)
Asin: B0BN2X1N2V | Model: bnm | PartNumber: bnm | Ean: 0791101942251 | UPC: 791101942251
【Smooth Ventilation】:The Interior Of The Duct Splitter Is Smooth, And Its Reasonable Curvature Greatly Reduces The Wind Resistance.This Allows For Smooth Ventilation Of The Ventilation System.With The Dryer Vent Hose It Can Be Connected To Exhaust Fans, Dryer Vent Covers And Vent Seals, It Can Discharge Air From Each Part In The Ventilation Project..
【Widely Use】:Duct Connector Can Be Applied To All Ventilation Systems In Restaurants, Bedrooms, Bathrooms, Ceilings, Etc.It Can Be Used Outdoors And Indoors, Even If It Is Exposed To The Sun And Rain..
【Easy To Use】:Wipe The Tee When Using It, Then Dock It With The Hose And Fix It With Aluminum Foil Tape.Please Note: The 3-Way Duct Splitter Needs To Be Connected To The Hose First Before It Can Be Connected To Fan. Finally, Install The Clamp And Tighten The Screw.The Dryer Duct Connector Is Seamlessly Connected To Achieve A Good Leakproof Effect. Don't Worry About Leaking Air After Installation..
【Connector Size】:The Duct Connector Is A Three-Hole Connector With Two Branches.3 Way Connector Has A Diameter Of 97Mm (3.8 Inch) Per Interface, Suitable For Hoses Of 100 Mm (4 Inch).Duct Clamps Size: Thickness: 0.023"/0.6Mm,Width: 0.47"/12Mm,Adjustable Size Range From 3.58"-4.49"/91Mm-114Mm..
Features
- Premium Material :Duct connector made of high quality ABS plastic, high strength, good toughness , easy to install,environmentally friendly.Duct clamp made of high quality 304 stainless steel material,durable and sturdy.
- Connector Size :The duct connector is a three-hole connector with two branches.3 Way Connector has a diameter of 97mm (3.8 inch) per interface, suitable for hoses of 100 mm (4 Inch).Duct Clamps Size: Thickness: 0.023/0.6mm,width: 0.47/12mm,adjustable size range from 3.58-4.49/91mm-114mm.
- Smooth Ventilation :The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance.This allows for smooth ventilation of the ventilation system.With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals, it can discharge air from each part in the ventilation project.
- Easy to Use :Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape.Please note: The 3-way duct splitter needs to be connected to the hose first before it can be connected to fan. Finally, install the clamp and tighten the screw.The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation.
- Widely Use :Duct connector can be applied to all ventilation systems in restaurants, bedrooms, bathrooms, ceilings, etc.It can be used outdoors and indoors, even if it is exposed to the sun and rain.
- See more on Amazon...
Brand: ZHUOMINGJIA | Manufacturer: ZHUOMINGJIA
Dimensions: 3.70 x 5.90 x 5.90 Inches
Warranty: 2 YEARS
See On Amazon #7
MyLifeUNIT 3 Way Duct Connector, 6 Inch Duct Splitter for Exhaust Fan Dryer Vent Hose, Y Shape
Asin: B0B6FWXHDQ | Model: KT18XH072-B | PartNumber: KT18XH072-B
The Interior Of The Duct Splitter Is Smooth, And Its Reasonable Curvature Greatly Reduces The Wind Resistance. At The Same Time, It Can Discharge Air From Each Part Of The Ventilation Project.
It Has A Diameter Of 5.7 Inches (145Mm) Per Interface, Suitable For Hoses Of 6 Inches (152 Mm). Wipe The Tee When Using It, Then Dock It With A Hose And Fix It With Aluminum Foil Tape. Finally, Install The Clamp And Tighten The Screw.
The Dryer Duct Connector Is Seamlessly Connected To Achieve A Good Leakproof Effect. Don't Worry About Leaking Air After Installation. It Is Small In Size, So It Doesn't Take Up Space.
Made Of Premium Pp Plastic, It Is A Material With High Strength, Good Toughness And Easy Processing, No Heavy Metals. It Can Be Used Outdoors And Indoors, Even If It Is Exposed To The Sun And Rain.
Features
- The duct connector is a three-hole connector with two branches. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals
- Made of premium PP plastic, it is a material with high strength, good toughness and easy processing, no heavy metals. It can be used outdoors and indoors, even if it is exposed to the sun and rain
- The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air from each part of the ventilation project
- The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in size, so it doesn't take up space
- It has a diameter of 5.7 inches (145mm) per interface, suitable for hoses of 6 inches (152 mm). Wipe the tee when using it, then dock it with a hose and fix it with aluminum foil tape. Finally, install the clamp and tighten the screw
- See more on Amazon...
Brand: MyLifeUNIT | Manufacturer: MyLifeUNIT
Dimensions: 5.90 x 9.00 x 7.87 Inches
Warranty: 1 year
See On Amazon #8
Duct Connector, 3 Way Duct Splitter for Exhaust Fan Dryer Vent Hose, 4 Inch Dia Come with 3 PCS Hose Clamps (4 Inch)
Asin: B09BTJXNPN | Model: 1 | PartNumber: 1 | Ean: 0761587446246 | UPC: 761587446246
Product Features: Three-Hole Duct Connector Is Smooth, And Its Reasonable Curvature Greatly Reduces The Wind Resistance.This Allows For Smooth Ventilation Of The Ventilation System.Duct Clamps Make Installation Easier And Faster, And The Joints Are Seamless To Achieve A Good Leak-Proof Effect..
Package Included : 1Pack Y Shape Duct Connector +3Pack 4" Duct Clamp.
How To Use:Wipe The Tee First, Then Dock It To The Hose And Fix It With Aluminum Foil Tape. Finally, Use Clamps To Fasten The Secondary Fixing..
Connector Size:3 Way Connector Has A Diameter Of 97Mm (3.8 Inch) Per Interface, Suitable For Hoses Of 100 Mm (4 Inch). Duct Clamps Size: Thickness: 0.023"/0.6Mm,Width: 0.47"/12Mm,Adjustable Size Range From 3.58"-4.49"/91Mm-114Mm..
Features
- Duct Connector Material: Made of high quality ABS plastic, high strength, good toughness and easy processing. Duct Clamp Material: Made of high quality 304 stainless steel material,durable and sturdy.
- Connector Size:3 Way Connector has a diameter of 97mm (3.8 inch) per interface, suitable for hoses of 100 mm (4 Inch). Duct Clamps Size: Thickness: 0.023/0.6mm,width: 0.47/12mm,adjustable size range from 3.58-4.49/91mm-114mm.
- Product features: three-hole duct connector is smooth, and its reasonable curvature greatly reduces the wind resistance.This allows for smooth ventilation of the ventilation system.Duct Clamps make installation easier and faster, and the joints are seamless to achieve a good leak-proof effect.
- How to use:wipe the tee first, then dock it to the hose and fix it with aluminum foil tape. Finally, use clamps to fasten the secondary fixing.
- Package included : 1Pack Y shape duct connector +3Pack 4 Duct Clamp
- See more on Amazon...
Brand: Enenes | Manufacturer: Enenes direct
Dimensions: 0.39 x 0.39 x 0.39 inches | Weight: 0.10 Kilograms
See On Amazon #9
4 Inch Diameter T Joint 3 Way - Duct Splitter for Exhaust Fan Dryer - 3 Way Duct Hose Connector (4'' inch, White)
Asin: B084D87CZD | Model: 1 | PartNumber: 1 | Ean: 7427046530095, 4605098001050, 4605098000169
The Interior Of The Duct Splitter Is Smooth, And Its Reasonable Curvature Greatly Reduces The Wind Resistance. At The Same Time, It Can Discharge Air From Each Part In The Ventilation Project..
Equal T Piece Male Spigot Will Fit Into Round 100Mm Ventilation Pipe Or 102Mm Flexble Ducting..
The Dryer Duct Connector Is Seamlessly Connected To Achieve A Good Leakproof Effect. Great For Dryer Hose. Don't Worry About Leaking Air After Installation. It Is Small In Size, So It Doesn't Take Up Space..
Easy To Install And Durable, Just Push-Fit Duct And Fittings Together. Made Of High Quality Abs Plastic, It Is A Material With High Strength, Good Toughness And Easy Processing..
Features
- This duct connector is a three-hole connector with two branches. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals.
- Easy to install and durable, just push-fit duct and fittings together. Made of high quality ABS plastic, it is a material with high strength, good toughness and easy processing.
- The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air from each part in the ventilation project.
- The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Great for dryer hose. Don't worry about leaking air after installation. It is small in size, so it doesn't take up space.
- Equal T piece male spigot will fit into round 100mm ventilation pipe or 102mm flexble ducting.
- See more on Amazon...
Brand: Repa Market | Manufacturer: Repa Market
Dimensions: 3.93 x 6.84 x 5.31 Inches | Weight: 0.31 pounds
See On Amazon #10
Tatuo 4'' Duct Splitter 3 Way Duct Hose Connector Metal 45 Degree Y Shaped 4 Inch Duct Connector for Exhaust Fan Dryer Vent Hose Split Ventilation Intake Outlet Kitchen and Bathroom Applications
Asin: B0C2T3NSX1 | Model: Tatuo-Duct Connector-0117 | PartNumber: Tatuo-Duct Connector-0117
Quality Material: Made Of Galvanized Sheet With High Strength, Our 4 Inch Duct Connector Features Good Toughness, And Is Easy Processing, Sturdy, Waterproof And Rust Proof, Safe And Non Toxic, Can Be Applied Outdoors And Indoors, Even If Exposed To Sunlight And Rain, It Can Still Serve You For A Long Time.
Easy To Use: The 4 Inch Y Duct Connector Can Be Easily Applied, First You Wipe It Clean, Then Connect It With The Hose And Fix It With Aluminum Foil Tape (Not Included), Finally, Install The Fixture (Not Included) And Tighten The Screws (Not Included); It Is Suitable For Purification System Air Return Pipe, Central Air Conditioning Ventilation Pipe, Industrial Exhaust Ventilation Pipe, Home, Factory Building, Gymnasium, Underground Garage, Theater And Other Places.
Good Workmanship: The Interior Of The Dryer Vent Hose Connector Is Smooth, And The Reasonable Radian Reduces The Wind Resistance, At The Same Time, The Air In The Parts Of The Ventilation Project Can Be Exhausted, Bringing Convenience And Saving The Construction Cost.
Standard Size: The Diameter Of The 3 Holes Of Our Duct Splitter Is About 4 Inches, Which Is Suitable For Hoses With A Diameter Of About 4 Inches/ 10 Cm, The Joint Is Seamlessly Connected, Which Has Good Leakage Prevention Effect, So That No Need To Worry About Air Leakage After Installation; It Is Proper In Size And Takes Up Less Space.
Features
- You Will Get: the package contains 1 piece of ducting pipe y splitter, which can be connected to the exhaust fan, the dryer ventilation cover and the ventilation seal through the dryer ventilation hose to complete your ventilation system
- Standard Size: the diameter of the 3 holes of our duct splitter is about 4 inches, which is suitable for hoses with a diameter of about 4 inches/ 10 cm, the joint is seamlessly connected, which has good leakage prevention effect, so that no need to worry about air leakage after installation; It is proper in size and takes up less space
- Quality Material: made of galvanized sheet with high strength, our 4 inch duct connector features good toughness, and is easy processing, sturdy, waterproof and rust proof, safe and non toxic, can be applied outdoors and indoors, even if exposed to sunlight and rain, it can still serve you for a long time
- Good Workmanship: the interior of the dryer vent hose connector is smooth, and the reasonable radian reduces the wind resistance, at the same time, the air in the parts of the ventilation project can be exhausted, bringing convenience and saving the construction cost
- Easy to Use: the 4 inch y duct connector can be easily applied, first you wipe it clean, then connect it with the hose and fix it with aluminum foil tape (not included), finally, install the fixture (not included) and tighten the screws (not included); It is suitable for purification system air return pipe, central air conditioning ventilation pipe, industrial exhaust ventilation pipe, home, factory building, gymnasium, underground garage, theater and other places
- See more on Amazon...
Brand: Tatuo | Manufacturer: Tatuo
Dimensions: 5.51 x 13.77 x 5.90 inches
See On Amazon #11
Vent Systems 4'' Inch Duct Connector 3 Way Hose Adapter ABS Plastic/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan - Duct Hose Dryer Vent T Connector - 4 Inch 3 Way Fitting
Asin: B08GYM4Z48 | Ean: 4751037230088
The Interior Of The Duct Splitter Is Smooth, And Its Reasonable Curvature Greatly Reduces The Wind Resistance. At The Same Time, It Can Discharge Air From Each Part In The Ventilation Project..
It Is Suitable For Hoses Of 4 Inch (100 Mm). Wipe The Tee When Using It, Then Dock It With The Hose And Fix It With Aluminum Foil Tape. Finally, Install The Clamp And Tighten The Screw..
The Dryer Duct Connector Is Seamlessly Connected To Achieve A Good Leakproof Effect. Don't Worry About Leaking Air After Installation. It Is Small In Size, So It Doesn't Take Up Space..
Made Of High Quality Abs Plastic, It Is A Material With High Strength, Good Toughness And Easy Processing. It Is Free Of Heavy Metals, With The Features Of Environmentally Friendly, Safe And Non-Toxic..
Features
- The duct connector is a three-hole - 3 way connector with two branches. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals.
- Made of high quality ABS plastic, it is a material with high strength, good toughness and easy processing. It is free of heavy metals, with the features of environmentally friendly, safe and non-toxic.
- The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air from each part in the ventilation project.
- The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in size, so it doesn't take up space.
- It is suitable for hoses of 4 inch (100 mm). Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. Finally, install the clamp and tighten the screw.
- See more on Amazon...
Brand: Vent Systems | Manufacturer: Vent Systems
Dimensions: 3.93 x 5.31 x 5.31 Inches | Weight: 0.10 pounds
See On Amazon #12
Duct Connector, 3 Way Duct Splitter for Exhaust Fan Dryer Vent Hose 4 Inch Dia Come With 3 Pieces Stainless Steel Hose Clamps (4 Inch Y Shape)
Asin: B09VT6KD48 | Model: 1 | PartNumber: 1 | Ean: 0715968444697 | UPC: 715968444697
Connector Size:3 Way Connector Has A Diameter Of 97Mm (3.8 Inch) Per Interface, Suitable For Hoses Of 100 Mm (4 Inch). Duct Clamps Size: Thickness: 0.023"/0.6Mm,Width: 0.47"/12Mm,Adjustable Size Range From 3.58"-4.49"/91Mm-114Mm..
Package Included : 1 Pcs 4 Inch Y Shape Duct Connector +3 Pcs 304 Stainless Steel Hose Clamps.
How To Use: First Wipe The Tee, Then Dock It With The Hose And Fix It With Aluminum Foil Tape. Finally, Fix It With Clamps For Secondary Fixing..
Product Features:The 3-Hole Air Duct Joint Is Smooth And Reduces The Wind Resistance. Make The Ventilation System Smoothly. The Duct Clamps Make The Installation More Convenient And Quick, And The Joints Are Seamlessly Connected To Achieve A Good Leak-Proof Effect..
Features
- High Quality Material:The Duct Connector is made of high quality ABS plastic, high strength, good toughness and easy processing. Duct Clamp Material: Made of high quality 304 stainless steel material,durable and sturdy.
- Product features:The 3-hole air duct joint is smooth and reduces the wind resistance. Make the ventilation system smoothly. The duct clamps make the installation more convenient and quick, and the joints are seamlessly connected to achieve a good leak-proof effect.
- Connector Size:3 Way Connector has a diameter of 97mm (3.8 inch) per interface, suitable for hoses of 100 mm (4 Inch). Duct Clamps Size: Thickness: 0.023/0.6mm,width: 0.47/12mm,adjustable size range from 3.58-4.49/91mm-114mm.
- How to use: First wipe the tee, then dock it with the hose and fix it with aluminum foil tape. Finally, fix it with clamps for secondary fixing.
- Package included : 1 PCS 4 Inch Y shape duct connector +3 PCS 304 Stainless Steel Hose Clamps
- See more on Amazon...
Brand: Enenes | Manufacturer: Enenes direct
Dimensions: 0.39 x 0.39 x 0.39 Inches
See On Amazon #13
4 Inch 3 Way Y Connector with 3-15/16 Inch OD and 3-11/16 Inch ID Openings ABS Plastic for Dust Collector Systems 73453
Asin: B06W5JSZCS | Model: 73453 | PartNumber: 73453 | Ean: 0791617734531 | UPC: 791617734531
Will Fit All Standard 4" Flexible Dust Collection Hose.
Made From 1/8" Thick Abs Abrasion Resistant Plastic.
Overall Length Is 10" And Width Is 8"..
Nominal Dimensions: Od Of Openings Are 3 15/16 And Id Are 3 11/16"..
Features
- Allows branching of dust collection to add every machine in the shop
- Nominal dimensions: OD of openings are 3 15/16 and ID are 3 11/16.
- Will fit all standard 4 flexible dust collection hose
- Overall length is 10 and width is 8.
- Made from 1/8 thick ABS abrasion resistant plastic
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #14
HVAC OV Metal 3 Way Y Shape Duct Connector - 4 Inch Fit - for Dryer Vent, Extractor Fan, Duct/Hose Connection Gray
Asin: B09Z44F8KM | Ean: 4751037981409
Fits Any Standard 4 Inch Size Vent Pipe Or Duct Work..
The Perfect Solution To Connect Your Ventilation System..
This Is A High Quality Metal Duct Splitter, It Has A Y Shape, Which Means It Is A Three Way Metal Connector For Splitting The Ducts Into Multiple Directions..
The Seamless Connections Make This Product Very User Friendly. Installing This Connector Is Easy And Fast, So You Can Get Your Ventilation Up And Running In No Time..
Features
- This 3 way metal connector is made for a 4 inch fit. It can be connected to exhaust fans, any ducts or conditioning systems
- The seamless connections make this product very user friendly. Installing this connector is easy and fast, so you can get your ventilation up and running in no time.
- Fits any standard 4 inch size vent pipe or duct work.
- This is a high quality metal duct splitter, it has a Y shape, which means it is a three way metal connector for splitting the ducts into multiple directions.
- The perfect solution to connect your ventilation system.
- See more on Amazon...
Brand: HVAC OV | Manufacturer: HVAC OV
Dimensions: 3.94 x 9.92 x 10.63 Inches | Weight: 0.97 Pounds
See On Amazon #15
Imperial Manufacturing GV0984 Imperial Full Flow Duct Wye, 4 in. X 4 in.
Asin: B00P6NEC4Q | Model: GV0984 | PartNumber: GV0984 | Ean: 0063467137214 | UPC: 063467137214
Durable And Long Lasting.
Convenient And Easy To Use.
Brand: Imperial | Manufacturer: IMPERIAL MANUFACTURING
Dimensions: 17.50 x 20.80 x 25.80 Inches | Weight: 0.00 pounds
See On Amazon #16
4'' Inch Duct Splitter to 90 Degree 4" Inch Branch for Exhaust Fan, Dryer Vent Hose - 3 Way Duct Hose Connector, T Shape, T Joint Metal, Ducting Adapter, 4x4x4 Splitter
Asin: B086QYFTS1 | Ean: 7427046529532
The Interior Of The Duct Splitter Is Smooth, And Its Reasonable Curvature Greatly Reduces The Wind Resistance. At The Same Time, It Can Discharge Air From Each Part In The Ventilation Project..
The Use Of Our 3 Way Duct Connector Saves On Construction Costs And Significantly Reduces The Overall Cost Compared To Conventional Cast Iron Connector Of The Same Specification..
The Dryer Duct Connector Is Seamlessly Connected To Achieve A Good Leakproof Effect. Don't Worry About Leaking Air After Installation. It Is Small In Size, So It Doesn't Take Up Space..
Made Of High Quality Metal, It Is A Material With High Strength, Good Toughness And Easy Processing. With The Features Of Environmentally Friendly, Safe And Non-Toxic. It Can Be Used Outdoors And Indoors, Even If It Is Exposed To The Sun And Rain. This Connector Is Durable And Long Lasting..
Features
- This is a three-way connector with one branch. Main duct diameter is 3.94" Inches. Branch diameter is 3.94" Inches. Branch angle: 90 Degrees. With a dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals.
- Made of high quality Metal, it is a material with high strength, good toughness and easy processing. With the features of environmentally friendly, safe and non-toxic. It can be used outdoors and indoors, even if it is exposed to the sun and rain. This connector is durable and long lasting.
- The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air from each part in the ventilation project.
- The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in size, so it doesn't take up space.
- The use of our 3 way duct connector saves on construction costs and significantly reduces the overall cost compared to conventional cast iron connector of the same specification.
- See more on Amazon...
Brand: Repa Market | Manufacturer: Repa Market
Dimensions: 5.70 x 10.06 x 3.93 Inches | Weight: 0.46 Kilograms
See On Amazon #17
Vent Systems 4'' Inch 45 Degree Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan - Duct Hose Dryer Vent T Connector - 4 Inch 3 Way Fitting
Asin: B08GY8LVYR | Ean: 4751037230415
The Interior Of The Duct Splitter Is Smooth, And Its Reasonable Curvature Greatly Reduces The Wind Resistance. At The Same Time, It Can Discharge Air From Each Part In The Ventilation Project..
It Is Suitable For Hoses Of 100 Mm (4 Inch). Wipe The Tee When Using It, Then Dock It With The Hose And Fix It With Aluminum Foil Tape. Finally, Install The Clamp And Tighten The Screw..
The Dryer Duct Connector Is Seamlessly Connected To Achieve A Good Leakproof Effect. Don't Worry About Leaking Air After Installation. It Is Small In Size, So It Doesn't Take Up Space..
It Can Be Used Outdoors And Indoors, Even If It Is Exposed To The Sun And Rain..
Features
- The duct connector is a three-hole - 3 way connector with two branches. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals.
- It can be used outdoors and indoors, even if it is exposed to the sun and rain.
- The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air from each part in the ventilation project.
- The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in size, so it doesn't take up space.
- It is suitable for hoses of 100 mm (4 Inch). Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. Finally, install the clamp and tighten the screw.
- See more on Amazon...
Brand: Vent Systems | Manufacturer: Vent Systems
Dimensions: 3.93 x 10.61 x 8.41 Inches
See On Amazon #18
Hicarer 4 Pcs Galvanized Steel Metal Duct Connector 4 Inch Ventilation Duct Extension Round Dryer Vent Coupler Metal Dryer Pipe Coupling Rigid Pipe Connection Metal Hose Extension for Pipe, Silver
Asin: B0CKXNCCLP
Precise Size: Our Dryer Vent Connector Comes With An Exact Dimension Of 3.9 Inches/ 100 Mm Outer Diameter, 2.83 Inches/ 72 Mm Height, And 0.02 Inches/ 0.5 Mm Thickness; This Carefully Crafted Product Can Seamlessly Connect 2 Pcs Of 4 Inch Air Ducts, Making It An Essential Part Of A Competent Ventilation System.
Versatile Application: Our 4 Inch Duct Connector Is Designed For Versatile Usage; It Fits Bathroom Exhaust Fan, Hvac System, In Line Ventilator, Drum Dryer, Hydroponics, Kitchen And More; Additionally, It Pairs Well With Exhaust Fans And Dust Collectors, Offering Less Adaptability Concerns And A Broader Scope Of Use.
Easy Installation: This Dryer Vent Hose Connector Simplifies The Task Of Setting Up A Ventilation System; It Is Compatible With Vent Couplers In The 2 Ducts, Which Can Be Easily Fixed Using Glue, Adhesive Tape, Or A Steel Clip, Thus Providing An Uncomplicated And Easy Installation Process.
Package Contents: The Package Comes With 4 Galvanized Steel Metal Duct Connectors In The Package; This Sufficient Quantity Provides You With Additional Convenience To Meet Your Needs In Full, Ensuring You Have Supplies For Your Maintenance Projects; And Also You Can Share The Dryer Hose Connector With Your Families And Others.
Features
- Durable Material: the resilience and sturdiness of the dryer duct connector is ensured by galvanized steel; This enhances the product's lifespan, making it resistant to rust, corrosion, and deformity; It renders assurance of quality, durability, and aesthetic appeal
- Package Contents: the package comes with 4 galvanized steel metal duct connectors in the package; This sufficient quantity provides you with additional convenience to meet your needs in full, ensuring you have supplies for your maintenance projects; And also you can share the dryer hose connector with your families and others
- Precise Size: our dryer vent connector comes with an exact dimension of 3.9 inches/ 100 mm outer diameter, 2.83 inches/ 72 mm height, and 0.02 inches/ 0.5 mm thickness; This carefully crafted product can seamlessly connect 2 pcs of 4 inch air ducts, making it an essential part of a competent ventilation system
- Easy Installation: this dryer vent hose connector simplifies the task of setting up a ventilation system; It is compatible with vent couplers in the 2 ducts, which can be easily fixed using glue, adhesive tape, or a steel clip, thus providing an uncomplicated and easy installation process
- Versatile Application: our 4 inch duct connector is designed for versatile usage; It fits bathroom exhaust fan, HVAC system, in line ventilator, drum dryer, hydroponics, kitchen and more; Additionally, it pairs well with exhaust fans and dust collectors, offering less adaptability concerns and a broader scope of use
- See more on Amazon...
Brand: Hicarer | Manufacturer: Hicarer
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #19
4" Inch T-Shape Ducting Splitter - 90 Degree Galvanized Steel 3-Way Dust Collection Fitting - Branches for Exhaust Fan - Ducting Adapter - Duct Hose Connector
Asin: B0CRZ5LQY2 | Ean: 4751038507400
Our Splitters Are Manufactured Using Galvanized Steel Sheets, Which Are Corrosion Resistant Due To The Zinc Coating, Ensuring Durability And Longevity..
Applications Include Residential Hvac Systems, Large Commercial Buildings, Industrial Ventilation Systems, Hospitals, Manufacturing Facilities, Commercial Kitchens, Agricultural Settings, And Specialized Environments Such As Laboratories..
Smooth Galvanized Steel Surfaces On The Splitters Minimize Dirt Accumulation And Potential Hygiene Concerns, Ensuring Hassle-Free Upkeep..
Ducting Splitters Can Modify Ventilation Systems By Offering Various Configurations Tailored To Specific Application Types, Enabling Precise Control And Direction Of Airflow..
Features
- This is a three-way connector with one branch. Main duct diameter is 3.94" Inches. Branch diameter is 3.94" Inches. Branch angle: 90 Degrees. With a dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals.
- Ducting splitters can modify ventilation systems by offering various configurations tailored to specific application types, enabling precise control and direction of airflow.
- Our splitters are manufactured using galvanized steel sheets, which are corrosion resistant due to the zinc coating, ensuring durability and longevity.
- Smooth galvanized steel surfaces on the splitters minimize dirt accumulation and potential hygiene concerns, ensuring hassle-free upkeep.
- Applications include residential HVAC systems, large commercial buildings, industrial ventilation systems, hospitals, manufacturing facilities, commercial kitchens, agricultural settings, and specialized environments such as laboratories.
- See more on Amazon...
Brand: Repa Market | Manufacturer: Repa Market
Dimensions: 3.82 x 8.74 x 5.91 inches
See On Amazon
Looking For Something Else?
Search