awolsrgiop 800W Jewelry Spot Welding Machine High Power Bracelet Jewelry Welding Machine Argon Pulse Spot Welder Adjustable Jewelry Pulse Spot Welding Machine High Power DIY Welding Tool Kit
Asin: B0C9HPHG53 | Model: 1 | PartNumber: 1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Operating Steps】Turn On The Power And Turn On The Power Switch. Adjust The Current Knob. Start From The Minimum Test, And Increase The Current When Welding Is Not Performed. The Current Should Be Adjusted To A Small Value After Welding. The Scale Value Can Be Adjusted According To The Requirements Of The Workpiece. Hold The Workpiece With Tweezers, With The Workpiece Interface Aligned With The Tip Of The Tungsten Needle. Press The Foot Switch With Your Foot..
【Reminder】This Machine Is Precision Equipment, Please Use With Caution. The Flashlight Is Harmful To The Eyes, Please Take Good Protective Measures When Using It (Aim At The Workpiece First, Keep Your Hands Still, Close Your Eyes Or Look Sideways When Stepping On The Switch). When Stepping Down The Foot Switch, Do Not Touch The Metal Part Of Tungsten Needle And Tweezer At The Same Time, Otherwise There Will Be Needle Feeling..
【Note】The Workpiece Clamped With The Tweezers, With 160V Dc, Should Not Touch The Tungsten Needle Or Chassis To Avoid Damage By Short Circuit Of The Machine Circuit. The Foot Should Not Step On The Foot Switch For A Long Time, And Move It Away Immediately After Stepping On It. If You Step On The Foot Switch For A Long Time, The Machine Is In A Short-Circuit State And The Internal Circuit Will Be Burned Out..
【Scope Of Use】Can Weld Gold, Silver, K-Gold, Gold, Palladium, Platinum With A Diameter Of 1.3Mm. Can Weld Titanium, Copper, Stainless Steel Jewelry With A Diameter Of About 1Mm. Silver, Copper, Jade Bracelets, Small Rings, Earrings , Skilled Can Also Weld Small Parts Inside The Dental With Wire Thermocouple Clock And So On..
Features
- Installation and Debugging Electrode clip is connected to the output negative pole, electrode holder is connected to the output positive pole. Argon gas is connected to the argon gas inlet through the argon gas pressure reducing valve, and the argon gas pressure reducing valve is adjusted to the minimum gas output. The tungsten needle can be sharpened on the grinder, using the principle of tip discharge to work.
- Scope of Use Can weld gold, silver, K-gold, gold, palladium, platinum with a diameter of 1.3MM. Can weld titanium, copper, stainless steel jewelry with a diameter of about 1MM. Silver, copper, jade bracelets, small rings, earrings , skilled can also weld small parts inside the dental with wire thermocouple clock and so on.
- Operating Steps Turn on the power and turn on the power switch. Adjust the current knob. Start from the minimum test, and increase the current when welding is not performed. The current should be adjusted to a small value after welding. The scale value can be adjusted according to the requirements of the workpiece. Hold the workpiece with tweezers, with the workpiece interface aligned with the tip of the tungsten needle. Press the foot switch with your foot.
- Note The workpiece clamped with the tweezers, with 160V DC, should not touch the tungsten needle or chassis to avoid damage by short circuit of the machine circuit. The foot should not step on the foot switch for a long time, and move it away immediately after stepping on it. If you step on the foot switch for a long time, the machine is in a short-circuit state and the internal circuit will be burned out.
- Reminder This machine is precision equipment, please use with caution. The flashlight is harmful to the eyes, please take good protective measures when using it (aim at the workpiece first, keep your hands still, close your eyes or look sideways when stepping on the switch). When stepping down the foot switch, do not touch the metal part of tungsten needle and tweezer at the same time, otherwise there will be needle feeling.
- See more on Amazon...
Brand: awolsrgiop | Manufacturer: awolsrgiop
See On Amazon Similar To awolsrgiop 800W Jewelry Spot Welding
#1
YIEPET Jewelry Automatic Spot Welding Machine 110V 60HZ Pulse Argon arc Welding Machine Jewelry Welding Machine, Used for DIY Jewelry Repair Tools to Repair Gold and Hardware Workpiece Welding.
Asin: B0C36WF6TR | Model: YIE-12 | PartNumber: YIE-12 | Ean: 0649985613715 | UPC: 649985613715
3.Pulse Argon Arc Welding Machine: Production In Strict Accordance With International Standards And Customer Requirements. Small And Exquisite, Stainless Steel Body, Long Service Life. High Frequency Tig Non-Contact Arc Ignition Reduces Tungsten And Material Consumption..
5.Please Note; This Product Can Be Used With Or Without Argon Gas. But Using Argon, The Welding Effect Is More Perfect. (The Two Electrodes Cannot Be Short-Circuited).
4.[Widely Used] Suitable For Home Diy And General Maintenance Work. Can Be Used For Pure Gold Welding, Pure Silver Welding, Titanium Welding And Orthodontic, Cobalt Chromium Alloy Welding, Metal Workpiece Welding, Dental Welding, Jewelry Repair Welding, Jewelry Diy Production..
2.[High Efficiency] Pulsed Argon Arc Welding Machine, With The Function Of Laser Welding Machine, Equipment Cost And Operation Cost Is Much Lower Than Laser Welding Machine..
Features
- 1. High quality design: The pulse argon arc welding machine is small in size, safe and stable, light in weight only 8KG, one key switch welding mode, (five quick modes), can adjust the power and welding time, change the welding performance parameters.
- 2.[High efficiency] pulsed argon arc welding machine, with the function of laser welding machine, equipment cost and operation cost is much lower than laser welding machine.
- 3.Pulse argon arc welding machine: production in strict accordance with international standards and customer requirements. Small and exquisite, stainless steel body, long service life. High frequency TIG non-contact arc ignition reduces tungsten and material consumption.
- 4.[Widely used] Suitable for home DIY and general maintenance work. Can be used for pure gold welding, pure silver welding, titanium welding and orthodontic, cobalt chromium alloy welding, metal workpiece welding, dental welding, jewelry repair welding, jewelry DIY production.
- 5.please note; This product can be used with or without argon gas. But using argon, the welding effect is more perfect. (The two electrodes cannot be short-circuited)
- See more on Amazon...
Brand: YIEPET | Manufacturer: YIEPET
Dimensions: 9.06 x 11.02 x 6.30 inches
See On Amazon #2
80A 110V Jewelry Spot Welder Pulse Sparkle Spot Welder Portable Spot Welding Machine with Handle Tool for Gold Silver Platinum
Asin: B08N6RGDM6 | Model: Jewelry Spot Welder | PartNumber: Jewelry Spot Welder | Ean: 0723508188192 | UPC: 723508188192
【Application】This Spot Welder Can Weld Gold, Silver, Gold, Palladium And Platinum Etc Within 0.5-1.5Mm/0.01-0.05 In In Diameter. Mainly Used For Welding Gold And Silver Necklaces, Earrings And Other Ring Closure, It Does Not Apply To The Pieces Of Work-Piece..
【Notice】Please Don't Step On The Foot Switch For A Long Time. Otherwise, The Internal Circuit Will Be Burned; We Recommend Professional Repairs And Please Be Aware Of Electrical Safety..
【Packages Include】1* Spot Welding Machine; 1* Foot Pedal Switch; 1* Power Cord; All Accessories For Assembly..
【Efficient & Excellent 】This Permanent Jewelry Welder Can Coarse Adjustment Buttons Within 1-9 Levels. It Uses Plasma High-Frequency Discharge To Generate A High-Temperature Arc Between The Workpiece And The Tungsten Needle, Which Instantly Forms A Molten Pool At The Metal Welded Joints, Enabling Smooth, Solid, And Efficient Welding..
Features
- 80A Pulse Jewelry Welder Kit Voltage: AC 110V, 60Hz; Power: 600W; Maximum Current: 1 - 80A; Product Size: 10.07x9.84x5.11inch; Welding Range: 0.5-1.5mm/0.01-0.05in.
- Efficient & Excellent This permanent jewelry welder can coarse adjustment buttons within 1-9 levels. It uses plasma high-frequency discharge to generate a high-temperature arc between the workpiece and the tungsten needle, which instantly forms a molten pool at the metal welded joints, enabling smooth, solid, and efficient welding.
- Application This spot welder can weld gold, silver, gold, palladium and platinum etc within 0.5-1.5mm/0.01-0.05 in in diameter. Mainly used for welding gold and silver necklaces, earrings and other ring closure, it does not apply to the pieces of work-piece.
- Packages include 1* Spot Welding Machine; 1* Foot Pedal Switch; 1* Power Cord; All Accessories for Assembly.
- Notice Please don't step on the foot switch for a long time. Otherwise, the internal circuit will be burned; We recommend professional repairs and please be aware of electrical safety.
- See more on Amazon...
Brand: DYRABREST | Manufacturer: Rowya
Dimensions: 5.10 x 10.00 x 9.80 inches
See On Amazon #3
Permanent Jewelry Welder Jewelry Spot Welding Machine, 80A 110V 400W Jewelry Spot Welder Electric Soldering Machine Gold Silver Jewelry Spot Welding Tool Spot Welder Kit (Yellow)
Asin: B0CQTB6TN6 | Model: 80A | PartNumber: 80A
Two Operation Modes: According To The Specific Workpiece And Your Operating Habits, A Hand-Held Welding-Gun And A Welding-Gun With A Bracket Are Provided For Your Selection And Replacement. 400W Power Can Realize Spot Welding In A Shorter Time. High-Precision Current Regulations And Tungsten Needle Welding Head Bring You Professional, Smooth, And Solid Welding..
Wide Application: The Gold Silver Platinum Welding Machine Can Be Used For The Rapid Welding Of Platinum, Gold, K Gold, Silver, And Steel. It Is Mainly Used For Welding The Ring Clasp Of The Jewelry. Workpieces Such As Metal Plates And Tubes Cannot Be Welded..
Intelligent Adjustment: According To The Size Of The Workpiece, Solder Joint, And The Process Requirements, You Can Precisely Adjust The Output Current Through The Coarse Adjustment Knob And The Micro Adjustment Knob..
Good Welding Effect: Using The Principle Of Plasma High-Frequency Discharge, A High-Temperature Arc Is Generated Between The Workpiece And The Tungsten Needle To Form A Molten Pool At The Metal Welding Junction Instantaneously, Allowing For Smooth, Firm, Fast, And Efficient Welding, Which Is The Best Partner For Family Diy And General Maintenance Work!.
Features
- High Quality Strong and Durable: The thickened sheet metal housing with painted finish is solid, wear-resistant, rust-proof, effectively protecting of internal components and extending the service life. This spot welding machine features high-quality sheet metal housing, which is very durable.
- Good Welding Effect: Using the principle of plasma high-frequency discharge, a high-temperature arc is generated between the workpiece and the tungsten needle to form a molten pool at the metal welding junction instantaneously, allowing for smooth, firm, fast, and efficient welding, which is the best partner for family DIY and general maintenance work!
- Two Operation Modes: According to the specific workpiece and your operating habits, a hand-held welding-gun and a welding-gun with a bracket are provided for your selection and replacement. 400W power can realize spot welding in a shorter time. High-precision current regulations and tungsten needle welding head bring you professional, smooth, and solid welding.
- Intelligent Adjustment: According to the size of the workpiece, solder joint, and the process requirements, you can precisely adjust the output current through the coarse adjustment knob and the micro adjustment knob.
- Wide Application: The gold silver platinum welding machine can be used for the rapid welding of platinum, gold, K gold, silver, and steel. It is mainly used for welding the ring clasp of the jewelry. Workpieces such as metal plates and tubes cannot be welded.
- See more on Amazon...
Brand: WETUSSEX | Manufacturer: WETUSSEX
Dimensions: 5.10 x 10.00 x 9.80 inches | Weight: 10.80 Pounds
See On Amazon #4
Permanent Jewelry Welder Kit, 80A Jewelry Welder Kit Handheld Spot Welder Pulse Sparkle Spot Welder Jewelry Spot Welding Machine for Gold Silver Platinum Blue
Asin: B0CB9YZKM3 | Model: JW-02 | PartNumber: JW-02
Adjustable - According To The Size Of The Workpiece, Solder Joint, And The Process Requirements, You Can Precisely Adjust The Output Current Through The Coarse Adjustment Knob And The Micro Adjustment Knob. According To The Specific Workpiece And Your Operating Habits, A Hand-Held Welding Gun And A Welding Gun With A Bracket Are Provided For Your Selection And Replacement..
Easy To Use - One-Button Power Switch, Adjustment Knob With Clear Scale, And Identifiable Interface Allow You To Use It Easily..
Good Heat Dissipation - Multiple Cooling Holes On The Machine Ensure Stable Welding Performance And Prevent It From Burning Out After The Long-Term Operation..
High Efficiency - Using The Principle Of Plasma High-Frequency Discharge, A High-Temperature Arc Is Generated Between The Workpiece And The Tungsten Needle To Form A Molten Pool At The Metal Welding Junction Instantaneously, Allowing For Smooth, Firm, Fast, And Efficient Welding..
Features
- Durable Jewelry Spot Welder Kit - The thickened sheet metal housing with painted finish is solid, wear-resistant, rust-proof, anti-corrosion, effectively protecting of internal components and extending the service life.
- High Efficiency - Using the principle of plasma high-frequency discharge, a high-temperature arc is generated between the workpiece and the tungsten needle to form a molten pool at the metal welding junction instantaneously, allowing for smooth, firm, fast, and efficient welding.
- Adjustable - According to the size of the workpiece, solder joint, and the process requirements, you can precisely adjust the output current through the coarse adjustment knob and the micro adjustment knob. According to the specific workpiece and your operating habits, a hand-held welding gun and a welding gun with a bracket are provided for your selection and replacement.
- Good Heat Dissipation - Multiple cooling holes on the machine ensure stable welding performance and prevent it from burning out after the long-term operation.
- Easy to Use - One-button power switch, adjustment knob with clear scale, and identifiable interface allow you to use it easily.
- See more on Amazon...
Brand: BINELUCOLU | Manufacturer: BINELUCOLU
Weight: 11.02 Pounds
See On Amazon #5
Lemoeyes Jewelry Spot Welding Machine, 600W 80A Electric Spot Welder Adjustable Jewelry Repair Tool for Platinum Gold Silver Steel, Mainly Welding the Ring Clasp of Jewelry, 0.5-1.5mm Welding Range
Asin: B0BZD6SS4P | Model: QCJLY57JUS | PartNumber: QCJLY57JUS | Ean: 0722487863731 | UPC: 722487863731
Suitable For - Can Be Used For The Rapid Welding Of Platinum, Gold, K Gold, Silver, And Steel. It Is Mainly Used For Welding The Ring Clasp Of The Jewelry. Workpieces Such As Metal Plate. Tubes Cannot Be Welded.
Foot Switch & Heat Dissipation- The Precision Of Spot Welding Can Be Improved By Controlling The Welding Time By Foot Switch. Multiple Cooling Holes On The Machine Ensure Stable Welding Performance.
Two Operation Mode - According To The Specific Workpiece And Your Operating Habits, A Hand-Held Welding Gun And A Welding Gun With A Bracket Are Provided For Your Selection And Replacement.
Intelligent Adjustment - According To The Size Of The Workpiece, Solder Joint, You Can Precisely Adjust The Output Current Through The Coarse Adjustment Knob And The Micro Adjustment Knob.
Features
- WORKING PRINCIPLE - Using plasma high-frequency discharge, a high-temperature arc is generated between the workpiece and the tungsten needle to form a molten pool at the metal welding junction instantaneously, makes welding smooth, strong and efficient
- INTELLIGENT ADJUSTMENT - According to the size of the workpiece, solder joint, you can precisely adjust the output current through the coarse adjustment knob and the micro adjustment knob
- SUITABLE FOR - Can be used for the rapid welding of platinum, gold, K gold, silver, and steel. It is mainly used for welding the ring clasp of the jewelry. Workpieces such as metal plate. TUBES CANNOT BE WELDED
- TWO OPERATION MODE - According to the specific workpiece and your operating habits, a hand-held welding gun and a welding gun with a bracket are provided for your selection and replacement
- FOOT SWITCH & HEAT DISSIPATION- The precision of spot welding can be improved by controlling the welding time by foot switch. Multiple cooling holes on the machine ensure stable welding performance
- See more on Amazon...
Brand: Lemoeyes | Manufacturer: Lemoeyes
See On Amazon #6
awolsrgiop 50A 110V Jewelry Spot Welder, 500W Pulse Sparkle Spot Welder Machine with Handle Tool Jewelry Welding Tool for Gold Silver Platinum Adjustable Power for Glasses Repair, Jewelry, Handicrafts
Asin: B0CCHQG62M | Model: 1 | PartNumber: 1
【Adjustable Power】You Can Adjust The Output Power According To The Size Of The Welding Wire Through The Coarse And Fine Adjustment Knob To Ensure Smooth And Efficient Welding. Easy To Use: Convenient On/Off Buttons, Adjustment Knobs, Various Sockets, An Intuitive Ammeter And A Detailed English Manual Make It Easy To Use The Machine. The Foot Pedal Frees Up Your Hands And Saves Labour When Starting The Welder..
【Note】Please Check That The Supply Voltage Matches. The Machine Power Supply Should Be Plugged Into A Primary Power Outlet, Not A Secondary Power Outlet (E.G. Electric Plug). Soldering Tests Must Be Carried Out On The Soldered Parts. Please Try To Avoid Triggering The Switch Without A Soldered Part. During The Weld Test, The Current Should Be Adjusted From Small To Large..
【Note】During Welding, The Workpiece Must Not Be Located At The Tip Of The Tungsten Needle Or Stepped On The Pedal, As This May Result In A Short Circuit Of The Machine. The Two Electrodes And The Welding Needle Must Not Touch Each Other To Avoid Short Circuit. Please Do Not Step On The Pedal For A Long Time, Only Step On It Once And Then Start It Immediately, Otherwise It Will Easily Cause Short Circuit..
【Protective Shipping】To Prevent As Much As Possible Damage To The Product During Shipping, This Product Is Shipped In A Hard Cardboard Box, Sponge And Plastic Bag, Which Can Effectively Resist Normal Squeezing And Dropping. Non-Slip Foot Pads: Four Non-Slip Feet Provide Extra Support To Better Keep The Product Stable, Raise The Bottom To Avoid Moisture And Protect The Countertop From Scratches..
【Easy To Clean】Due To The Smooth Surface Baking Varnish, You Can Wipe The Dirt On The Machine With A Rag. Please Read The Operation Manual Carefully Before Use And Pay Special Attention To The Safety Instructions In It. Please Keep The Electrodes Clean. After Working For A While, It Is Recommended To Sharpen The Needle And Remove Impurities Before Continuing To Use It..
【Top Handle Strap】Allows You To Carry The Machine To Various Workplaces As Easily As A Briefcase. Suitable For Quick Soldering Of Platinum, Gold, Karat Gold, Silver, Copper And Iron, As Well As Precision Soldering Of Wires With Rounded Ends, Oval Buckles And Fine Wires. Suitable For Eyeglasses Repair, Jewellery, Tin Toys, Handicrafts, Dentures, Metal Wires, Diy, Orthodontics And So On..
【Note】Please Do Not Put The Machine In A Wet Place, Keep It Dry. Please Do Not Touch The Machine With Wet Hands. Please Let Professional Personnel Maintain The Machine. Strong Light Will Be Emitted When Welding. Please Wear Protective Glasses (Not Included) When Welding And Do Not Look Directly At The Welding Area. Please Allow For Slight Colour Difference Due To Shooting Light And 1-3 Cm Error Due To Manual Measurement And Make Sure You Don't Mind Before Ordering..
【Stable Performance】Adopting High Quality Capacitors, Strong Anti-Grid Fluctuation Ability, Good Voltage Stabilisation, More Stable Welding Performance, Not Easy To Break The Arc. High Efficiency: Adopting High Frequency Plasma Discharge Principle And 500W High Power Ensures Smooth Welding Joints With Even Texture, Thus Improving Welding Efficiency..
Features
- Sturdy and Durable The product is made of high-quality metal with baking paint process, which is rust-proof, abrasion-resistant, corrosion-resistant and non-deformation. Heat dissipating holes: There are heat dissipating holes on three sides of the machine to ensure fast heat dissipation, protect the machine from burning and enable stable and continuous welding. Small footprint: Compact body (8.46*11.8*5.7 inches), suitable for a variety of countertops, small footprint.
- Stable Performance Adopting high quality capacitors, strong anti-grid fluctuation ability, good voltage stabilisation, more stable welding performance, not easy to break the arc. High efficiency: Adopting high frequency plasma discharge principle and 500w high power ensures smooth welding joints with even texture, thus improving welding efficiency.
- Adjustable Power You can adjust the output power according to the size of the welding wire through the coarse and fine adjustment knob to ensure smooth and efficient welding. Easy to use: Convenient on/off buttons, adjustment knobs, various sockets, an intuitive ammeter and a detailed english manual make it easy to use the machine. The foot pedal frees up your hands and saves labour when starting the welder.
- Top Handle Strap Allows you to carry the machine to various workplaces as easily as a briefcase. Suitable for quick soldering of platinum, gold, karat gold, silver, copper and iron, as well as precision soldering of wires with rounded ends, oval buckles and fine wires. Suitable for eyeglasses repair, jewellery, tin toys, handicrafts, dentures, metal wires, diy, orthodontics and so on.
- Protective Shipping To prevent as much as possible damage to the product during shipping, this product is shipped in a hard cardboard box, sponge and plastic bag, which can effectively resist normal squeezing and dropping. Non-slip foot pads: Four non-slip feet provide extra support to better keep the product stable, raise the bottom to avoid moisture and protect the countertop from scratches.
- Easy to Clean Due to the smooth surface baking varnish, you can wipe the dirt on the machine with a rag. Please read the operation manual carefully before use and pay special attention to the safety instructions in it. Please keep the electrodes clean. After working for a while, it is recommended to sharpen the needle and remove impurities before continuing to use it.
- Note Please check that the supply voltage matches. The machine power supply should be plugged into a primary power outlet, not a secondary power outlet (e.g. electric plug). Soldering tests must be carried out on the soldered parts. Please try to avoid triggering the switch without a soldered part. During the weld test, the current should be adjusted from small to large.
- Note During welding, the workpiece must not be located at the tip of the tungsten needle or stepped on the pedal, as this may result in a short circuit of the machine. The two electrodes and the welding needle must not touch each other to avoid short circuit. Please do not step on the pedal for a long time, only step on it once and then start it immediately, otherwise it will easily cause short circuit.
- Note Please do not put the machine in a wet place, keep it dry. Please do not touch the machine with wet hands. Please let professional personnel maintain the machine. Strong light will be emitted when welding. Please wear protective glasses (not included) when welding and do not look directly at the welding area. Please allow for slight colour difference due to shooting light and 1-3 cm error due to manual measurement and make sure you don't mind before ordering.
- See more on Amazon...
Brand: awolsrgiop | Manufacturer: awolsrgiop
See On Amazon #7
80A Pulse Spot Jewelry Spot Welding Machine, Portable Gold Silver Jewelry Spot Welding Tool with Handle, Welding Machine DIY Kit for Jewelry Gold Silver Platinum, Yellow
Asin: B0CL4FFL1D | Model: 80A+Yellow | PartNumber: 80A+Yellow | Ean: 0749767019473 | UPC: 749767019473
Welding Machine With Simple Operation: Spot Welder Has Simple Operation Interface, Clear Logo, Button Design, Make You Easy To Control Various Welding Parameters, Also Easy For Debugging And Maintenance. This 80A Pulse Spot Welder Is Light Weight, Small Size, With A Carrying Handle On The Top, Easy To Carry When Going Out To Work..
Wide Applications:The Jewelry Spot Welder Can Be Used For Quick Welding Of Platinum, Gold, Carat Gold, Silver And Steel. Mainly Used For Welding Jewelry Rings And Clasps, Our Spot Welder Is A Perfect Companion For Home Diy And General Maintenance Work..
Thoughtful Details: The Foot Switch Of This Spot Welder Allows You To Free Your Hands For Precision Welding. Anti-Slip Pads Help Spot Welding Machine To Achieve Stable Placement During Operation And Prevent The Table From Being Scratched.
Spot Welder With Good Effect:This Spot Welder Utilizes The Principle Of Plasma High-Frequency Discharge To Generate A High-Temperature Arc Between The Workpiece And The Tungsten Needle, Which Instantly Forms A Molten Pool At The Metal Weld Joint, Making The Welding Smooth, Firm, Fast And Efficient. A Practical Spot Welding Machine For Diy Lover..
Features
- High-quality Metal Material:This spot welder is made of baked surface-treated metal sheet, which has the characteristics of impact resistance and deformation resistance.This spot welding machine with high durability and stability can ensure its long-time continuous work without failure or stoppage
- Spot Welder with Good Effect:This spot welder utilizes the principle of plasma high-frequency discharge to generate a high-temperature arc between the workpiece and the tungsten needle, which instantly forms a molten pool at the metal weld joint, making the welding smooth, firm, fast and efficient. A practical spot welding machine for DIY lover.
- Welding Machine with Simple Operation: Spot welder has simple operation interface, clear logo, button design, make you easy to control various welding parameters, also easy for debugging and maintenance. This 80A pulse spot welder is light weight, small size, with a carrying handle on the top, easy to carry when going out to work.
- Thoughtful Details: the foot switch of this spot welder allows you to free your hands for precision welding. Anti-slip pads help spot welding machine to achieve stable placement during operation and prevent the table from being scratched
- Wide Applications:The jewelry spot welder can be used for quick welding of platinum, gold, carat gold, silver and steel. Mainly used for welding jewelry rings and clasps, our spot welder is a perfect companion for home DIY and general maintenance work.
- See more on Amazon...
Brand: plytinsg | Manufacturer: MaRainthStore
See On Amazon #8
awolsrgiop 110V 80A 600W Electric Jewelry Spot Welding Machine, Jewelry Welder Plasma Spot Welder Jewelry Gold Silver Platinum Welding Machine Adjustable 0.02-0.06inch Two Operation Modes
Asin: B0CF9CTWQ6
【Easy To Carry】Light Weight, Small Size, With A Carrying Handle On The Top, Convenient For You To Carry It When You Go Out To Work. Easy To Use: One-Touch Power Switch, Clearly Graduated Adjustment Knob And Recognizable Operation Interface Make You Easy To Use. Quick Soldering Of Platinum, Gold, Karat Gold, Silver And Steel. Mainly Used For Soldering Jewelry Rings. It Is Not Possible To Weld Workpieces Such As Metal Plates And Tubes..
【Note】Before Using The Welding Machine, Check Whether The Power Supply Meets The Operating Voltage. Connect The Output Wire Of The Welding Machine To The Screw Of The Corresponding Polarity (Tighten The Nut When Connecting The Output Wire To The Output Polarity). Please Don't Step On The Foot Switch For A Long Time. Step On It And Move Away Immediately. If The Switch Is Pressed For A Long Time And The Machine Is In A Short Circuit State, The Internal Circuit Will Be Burned..
【Good Heat Dissipation】There Are Many Heat Dissipation Holes On The Machine To Ensure Stable Welding Performance And Prevent The Machine From Being Burned Out After Long-Term Operation. Foot Switch: The Welding Time Is Controlled By Foot Switch, Which Can Improve The Precision Of Spot Welding And Avoid Interfering With Hand Operation. Non-Slip Feet: Four Non-Slip Feet On The Bottom Of The Machine Realize Stable Placement And Prevent Scratches On The Tabletop During Operation..
【Two Operation Modes】According To The Specific Workpiece And Your Operation Habit, We Provide Hand-Held Welding Torch And Welding Torch With Bracket For You To Choose And Change. Intelligent Adjustment: According To The Size Of The Workpiece, Welding Spot And Process Requirements, You Can Precisely Adjust The Output Current By Coarse Adjustment Knob And Fine Adjustment Knob..
Features
- Strong and Durable Thickened sheet metal shell, surface paint treatment, strong, wear-resistant, rust-proof, corrosion-resistant, effective protection of the internal components, prolonging the service life. Good welding effect: Utilizing plasma high-frequency discharge principle, a high-temperature arc is generated between the workpiece and the tungsten needle, which instantly forms a molten pool at the metal welding junction, resulting in smooth, firm, fast and efficient welding.
- Two Operation Modes According to the specific workpiece and your operation habit, we provide hand-held welding torch and welding torch with bracket for you to choose and change. Intelligent Adjustment: According to the size of the workpiece, welding spot and process requirements, you can precisely adjust the output current by coarse adjustment knob and fine adjustment knob.
- Easy to Carry Light weight, small size, with a carrying handle on the top, convenient for you to carry it when you go out to work. Easy to use: One-touch power switch, clearly graduated adjustment knob and recognizable operation interface make you easy to use. Quick soldering of platinum, gold, karat gold, silver and steel. Mainly used for soldering jewelry rings. It is not possible to weld workpieces such as metal plates and tubes.
- Good Heat Dissipation There are many heat dissipation holes on the machine to ensure stable welding performance and prevent the machine from being burned out after long-term operation. Foot switch: The welding time is controlled by foot switch, which can improve the precision of spot welding and avoid interfering with hand operation. Non-slip feet: Four non-slip feet on the bottom of the machine realize stable placement and prevent scratches on the tabletop during operation.
- Note Before using the welding machine, check whether the power supply meets the operating voltage. Connect the output wire of the welding machine to the screw of the corresponding polarity (tighten the nut when connecting the output wire to the output polarity). Please don't step on the foot switch for a long time. Step on it and move away immediately. If the switch is pressed for a long time and the machine is in a short circuit state, the internal circuit will be burned.
- See more on Amazon...
Brand: awolsrgiop | Manufacturer: awolsrgiop
See On Amazon #9
Soflightmok Jewelry Automatic Spot Welding Machine | 100w Pulse Argon Arc Jewelry Spot Welder for Repair Gold and Hardware Workpiece Welding | DIY Jewelry Repair Tool,Grey
Asin: B0D3C3P9P4 | Ean: 7320853236191
【Safe To Use】If Not Operated Within 5 Minutes, It Will Automatically Adjust To Ortho Mode To Avoid Accidental Injury To People Or Items. The Protective Cover Of The Handle Socket Effectively Prevents Foreign Objects Or Liquids From Entering The Machine. Automatic Voltage Compensation, Over-Current Protection, Overload Protection.
【Wide Application】Our Spot Welding Machine Can Be Used For Pure Gold Welding, Cobalt-Chromium Alloy Welding, Titanium Welding And Orthodontics, Hardware Workpiece Welding, Jewelry Repair Welding, Dental Welding, Jewelry Diy, Outdoor Maintenance, And Home Diy.
【Easy To Operate】The Machine Can Automatically Match Current And Voltage After Selecting Welding Mode, Making It An Choice For Beginners To Learn Welding; You Can Also Adjust The Current And Welding Duration As Needed, Which Is Very Suitable For Professionals..
【Equipment Mode】The Equipment Is Set Up With 5 Working Modes, Which Basically Meets The Operation Requirements. If You Need To Change The Working Mode, Just Adjust The 5 Buttons On The Panel To Achieve The Desired Working Status..
Features
- SPOT WELDING MACHINE Gold welding, cobalt-chromium alloy welding, mixed welding, pure titanium welding, and orthodontic mode can all be found on this jewelry spot welder machine, meeting your various needs at once.allowing you to enjoy the same features for less money.
- EQUIPMENT MODE The equipment is set up with 5 working modes, which basically meets the operation requirements. If you need to change the working mode, just adjust the 5 buttons on the panel to achieve the desired working status.
- SAFE TO USE If not operated within 5 minutes, it will automatically adjust to Ortho mode to avoid accidental injury to people or items. The protective cover of the handle socket effectively prevents foreign objects or liquids from entering the machine. Automatic voltage compensation, over-current protection, overload protection
- EASY TO OPERATE The machine can automatically match current and voltage after selecting welding mode, making it an choice for beginners to learn welding; You can also adjust the current and welding duration as needed, which is very suitable for professionals.
- WIDE APPLICATION Our spot welding machine can be used for pure gold welding, cobalt-chromium alloy welding, titanium welding and orthodontics, hardware workpiece welding, jewelry repair welding, dental welding, jewelry DIY, outdoor maintenance, and home DIY
- See more on Amazon...
Brand: Soflightmok | Manufacturer: Soflightmok
See On Amazon #10
awolsrgiop Welding Machine, 1000W Welding Bead Processor Weld Cleaning Machine for Metal/Arc Welding Intelligent Adjustment Digital Display for Automobiles, Aircraft, Ships
Asin: B0CY572FW7 | Model: Welding Equipment | PartNumber: Welding Equipment
【Save Effort】Just Operate It On The Welding Seam Back And Forth Scrubbing A Few Times, The Black Oxide Spots Will Be Cleaned Immediately. Flexibility To Remove Small Crevices And Hard-To-Reach Places, Avoiding Manual Grinding. One-Touch Power On/Off At The Main Power Supply, No Other Complicated Switching Procedures, More Convenient To Use. Built-In Fan Cooling Ensures That The Machine Will Operate Properly In The Summer Heat..
【Portable】Lightweight (5.73 Lbs.), So You Can Take It To Work Or Home At Any Time. Suitable For Metal, Electric Arc, Etc. It Can Be Used For Metal Parts Of Various Materials And Shapes, Such As Aircraft, Automobiles, Ships And Other Means Of Transport, And Can Also Be Used To Clean Up Yellow Spots, Black Spots, Traces Left By Materials In The Industrial Production Process And So On..
【Low Cost】Compared With Traditional Grinding And Pickling Treatment, It Is Less Time-Consuming, Faster And Has Better Cleaning Effect. At The Same Time, The Welding Machine Will Not Pollute The Environment After Use, And The Sewage After Cleaning Does Not Need To Be Treated. With Intelligent Short-Circuit Protection Function, Even If The Operation Error Triggers A Short Circuit, It Can Effectively Protect The Motherboard And Improve The Safety Of Use..
【High Efficiency】The Copper Head Is Oxidation-Resistant, Which Can Greatly Improve The Cleaning Performance. In Addition, The Igbt Power Tubes Greatly Increase The Occupancy Rate Of The Cleaning Agent, Improving Efficiency And Service Life. Digital Display Can Transmit Output Voltage Information And Control Functions More Effectively, Which Is Easy For Operators To Monitor And Manage..
Features
- Excellent Material Made of metal chassis, plastic and metal hardware, sturdy and durable, stable performance and long service life. It can compensate for unstable voltage through intelligent adjustment and frequency adjustment (0-34Hz), automatically identify high and low voltage, and instantly increase the voltage to clean different degrees of yellow spots, black spots and welding spots.
- High Efficiency The copper head is oxidation-resistant, which can greatly improve the cleaning performance. In addition, the IGBT power tubes greatly increase the occupancy rate of the cleaning agent, improving efficiency and service life. Digital display can transmit output voltage information and control functions more effectively, which is easy for operators to monitor and manage.
- Save Effort Just operate it on the welding seam back and forth scrubbing a few times, the black oxide spots will be cleaned immediately. Flexibility to remove small crevices and hard-to-reach places, avoiding manual grinding. One-touch power on/off at the main power supply, no other complicated switching procedures, more convenient to use. Built-in fan cooling ensures that the machine will operate properly in the summer heat.
- Low Cost Compared with traditional grinding and pickling treatment, it is less time-consuming, faster and has better cleaning effect. At the same time, the welding machine will not pollute the environment after use, and the sewage after cleaning does not need to be treated. With intelligent short-circuit protection function, even if the operation error triggers a short circuit, it can effectively protect the motherboard and improve the safety of use.
- Portable Lightweight (5.73 lbs.), so you can take it to work or home at any time. Suitable for metal, electric arc, etc. It can be used for metal parts of various materials and shapes, such as aircraft, automobiles, ships and other means of transport, and can also be used to clean up yellow spots, black spots, traces left by materials in the industrial production process and so on.
- See more on Amazon...
Brand: awolsrgiop | Manufacturer: awolsrgiop
See On Amazon #11
SOLRIMANA 110V Spot Welder,600W Sparkle Welder Adjustable Jewelry Platinum Gold Welding Machine,Pulse Spot Welder For Welding Jewelry Welding Ring Clasp of Jewelry Welding Caliber 0.5-1.5mm
Asin: B0CSK26S3W | Model: 110V 600W | PartNumber: 110V 600W | Ean: 0764331284064 | UPC: 764331284064
【Good Welding Effect】Using The Principle Of Plasma High-Frequency Discharge,A High-Temperature Arc Is Generated Between The Workpiece And The Tungsten Needle To Form A Molten Pool At The Metal Welding Junction Instantaneously,Allowing For Smooth,Firm,Fast,And Efficient Welding..
【Precautions】The Electromagnetic Pulse Spot Welding Machine Uses A Capacitor Bank To Discharge The Inductor For Welding.When Welding.Please Do Not Continue To Step On The Pedal During Welding, Otherwise It Will Easily Cause A Short Circuit And Burn The Inside Of The Machine..
【Good Heat Dissipation】Multiple Cooling Holes On The Machine Ensure Stable Welding Performance And Prevent It From Burning Out After The Long-Term Operation..
【High Power】The Latest Specification Is 80A, 110V.The Power Is 600Walthough The Power Is High, The Power Consumption Is Low.High-Frequency Spot Welding Lets You Weld Every Seam With Ease..
Features
- Usage Scenarios It can be used for the rapid welding of platinum, gold, K gold, silver, and steel.It is mainly used for welding the ring clasp of the jewelry.Workpieces such as metal plates and tubes cannot be welded. (Note: The welding diameter of the product is: 0.5-1.5mm, beyond this diameter range will lead to failure to work!
- High Power The latest specification is 80A, 110V.The power is 600WAlthough the power is high, the power consumption is low.High-frequency spot welding lets you weld every seam with ease.
- Good Welding Effect Using the principle of plasma high-frequency discharge,a high-temperature arc is generated between the workpiece and the tungsten needle to form a molten pool at the metal welding junction instantaneously,allowing for smooth,firm,fast,and efficient welding.
- Good heat dissipation Multiple cooling holes on the machine ensure stable welding performance and prevent it from burning out after the long-term operation.
- Precautions The electromagnetic pulse spot welding machine uses a capacitor bank to discharge the inductor for welding.When welding.Please do not continue to step on the pedal during welding, otherwise it will easily cause a short circuit and burn the inside of the machine.
- See more on Amazon...
Brand: SOLRIMANA | Manufacturer: CCARHOME
See On Amazon #12
WDDEYYDS Jewelry Spot Welder kit Silver Platinum Spot Welding Machine 400W Pulse Sparkle Jewelry Spot Welder Professional Spot Welder for Jewelry Repair Tool Ring Necklace,110V-80A
Asin: B0CL6MG2VH | Ean: 7621821248216
【Efficient & Excellent 】You Can Adjust The Output Power According To The Wire Size,The Welding Work Piece Is Bright And Clean, Fast And Efficient..
【Wide Application】This Spot Welder Can Weld Gold, Silver, Gold, Palladium And Platinum Etc Within 0.4-1.2Mm In Diameter. Mainly Used For Welding Gold And Silver Necklaces, Earrings And Other Ring Closure.
【Easy To Use】Used High Frequency Discharge Plasma, A Molten Pool Is Immediately Formed In The Metal Welded Joint.Foot Pedal Control, Easy To Use..
【Easy To Operate】The Welding Machine Adopts High Frequency Discharge Plasma De Working Principle For Welding. Foot Pedal Control, Easy To Use..
Features
- SPECIFICATIONS Power: 400W; Maximum current: 0.6-80A; Voltage: AC220V/110V
- EASY TO OPERATE The welding machine adopts high frequency discharge plasma de working principle for welding. Foot pedal control, easy to use.
- Efficient & Excellent You can adjust the output power according to the wire size,the welding work piece is bright and clean, fast and efficient.
- Easy To Use Used high frequency discharge plasma, a molten pool is immediately formed in the metal welded joint.Foot pedal control, easy to use.
- Wide Application This spot welder can weld gold, silver, gold, palladium and platinum etc within 0.4-1.2mm in diameter. Mainly used for welding gold and silver necklaces, earrings and other ring closure
- See more on Amazon...
Brand: WDDEYYDS | Manufacturer: WDDEYYDS
See On Amazon #13
WDDEYYDS Jewelry Spot Welder kit Electric Jewelry Spot Welder with Foot Pedal Handle Tool 400W Gold Silver Platinum Welding Machine for DIY Steel Ring Necklace,220V-80A
Asin: B0CL6M61BR | Ean: 7621821248278
【Efficient & Excellent 】You Can Adjust The Output Power According To The Wire Size,The Welding Work Piece Is Bright And Clean, Fast And Efficient..
【Wide Application】This Spot Welder Can Weld Gold, Silver, Gold, Palladium And Platinum Etc Within 0.4-1.2Mm In Diameter. Mainly Used For Welding Gold And Silver Necklaces, Earrings And Other Ring Closure.
【Easy To Use】Used High Frequency Discharge Plasma, A Molten Pool Is Immediately Formed In The Metal Welded Joint.Foot Pedal Control, Easy To Use..
【Easy To Operate】The Welding Machine Adopts High Frequency Discharge Plasma De Working Principle For Welding. Foot Pedal Control, Easy To Use..
Features
- SPECIFICATIONS Power: 400W; Maximum current: 0.6-80A; Voltage: AC220V/110V
- EASY TO OPERATE The welding machine adopts high frequency discharge plasma de working principle for welding. Foot pedal control, easy to use.
- Efficient & Excellent You can adjust the output power according to the wire size,the welding work piece is bright and clean, fast and efficient.
- Easy To Use Used high frequency discharge plasma, a molten pool is immediately formed in the metal welded joint.Foot pedal control, easy to use.
- Wide Application This spot welder can weld gold, silver, gold, palladium and platinum etc within 0.4-1.2mm in diameter. Mainly used for welding gold and silver necklaces, earrings and other ring closure
- See more on Amazon...
Brand: WDDEYYDS | Manufacturer: WDDEYYDS
See On Amazon #14
HUMNZR Jewelry Spot Welder,Pulse Tungsten arc spot Welding Machine Weldable Solid Gold, Aluminum, Titanium Welding and Orthodontics for Jewelry Restoration,110V
Asin: B0BXSV4D91 | Ean: 7893164225173
✔【Protect Workpiece】Minimum Working Space Is Required, Adjustable Power And Pulse Settings Allow Customization Of Penetration Depth And Spot Weld Diameter. After 5 Minutes Of Inactivity, The Unit Will Enter Ortho Mode To Avoid Damage To The Workpiece..
✔【Powerful Function】Pulsed Argon Arc Welding Machine, The Equipment Cost And Operating Cost Are Much Lower Than Other Welding Machines, And It Has The Functions Of Other Welding Machines. Welding Time: 3Ms-30Ms.
✔【High Standard Welder】Protection Level: Ip21. Supply Pressure: ≥0.1Mpa. Maximum Argon Consumption: 5L/Min. Input Voltage: 110V/60Hz. Welding Voltage: 40V. Input Power: 100W. Welding Current: 50A-600A. This Product Is Produced In Strict Accordance With International Standards And User Requirements..
✔【Multiple Functions In One Machine】This Pulse Argon Arc Welding Machine Can Be Used For Welding Pure Gold, Cobalt-Chromium Alloy, Pure Gold And Cobalt-Chromium Alloy, And Pure Titanium. Can Be Used For Orthodontics..
Features
- Multiple Welding Modes This machine has five welding modes, one-button switching welding mode, adjustable power and welding time, and changing the welding performance parameters of the welding method is very convenient.
- Multiple functions in one machine This pulse argon arc welding machine can be used for welding pure gold, cobalt-chromium alloy, pure gold and cobalt-chromium alloy, and pure titanium. Can be used for orthodontics.
- Protect Workpiece Minimum working space is required, adjustable power and pulse settings allow customization of penetration depth and spot weld diameter. After 5 minutes of inactivity, the unit will enter Ortho mode to avoid damage to the workpiece.
- High Standard Welder Protection Level: IP21. Supply pressure: 0.1MPa. Maximum argon consumption: 5L/min. Input voltage: 110V/60HZ. Welding voltage: 40V. Input power: 100W. Welding current: 50A-600A. This product is produced in strict accordance with international standards and user requirements.
- Powerful function Pulsed argon arc welding machine, the equipment cost and operating cost are much lower than other welding machines, and it has the functions of other welding machines. Welding time: 3ms-30ms
- See more on Amazon...
Brand: HUMNZR | Manufacturer: HUMNZR
See On Amazon
Looking For Something Else?
Search