Micro 100 FGIF-2378 Face Grooving Tool, 3/32" Width, 3/16" Proj, 3025" Min Bore Dia, 1-1/4" Max Bore Depth, 1463" Offset, 5/16" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B0C9KL7GGH
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Relief Ground Along Maximum Turn Depth (L2) To Avoid Interference During Long Turning Applications.
Split Face Geometry Provides Optimal Edge Strength.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Significantly Reduces Cycle Times, As Right Hand Design Allows For Multiple Tools To Be Run Simultaneously.
Features
- Designed to generate full radius grooves around a boss in the face of a part for right hand grooving applications (M03)
- Significantly reduces cycle times, as right hand design allows for multiple tools to be run simultaneously
- Relief ground along Maximum Turn Depth (L2) to avoid interference during long turning applications
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split face geometry provides optimal edge strength
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon Similar To Micro 100 FGIF2378 Face Grooving
#1
Micro 100 FG-250-020-025 Grooving Tool - Face Grooving, 020" Width, 025" Proj, 1/4" Min Bore Dia, 1" Max Bore Depth, 1/8" Offset, 1/4" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B09HV5R4CW
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #2
Micro 100 FG-250-040-075X Grooving Tool - Face Grooving, 040" Width, 075" Proj, 1/4" Min Bore Dia, 1" Max Bore Depth, 1/8" Offset, 1/4" Shank Dia, 2-1/2" OAL, AlTiN
Asin: B09HV4KTPH
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #3
Micro 100 FG-250-040 Grooving Tool - Face Grooving, 040" Width, 050" Proj, 1/4" Min Bore Dia, 215" Max Bore Depth, 1/8" Offset, 1/4" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B00Q8N3GQI | Model: FG-250-040 | PartNumber: FG-250-040 | Ean: 0728709129432 | UPC: 728709129432
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
Dimensions: 0.44 x 2.75 x 0.44 inches | Weight: 0.02 Pounds
See On Amazon #4
Micro 100 FG-250-030 Grooving Tool - Face Grooving, 030" Width, 050" Proj, 1/4" Min Bore Dia, 215" Max Bore Depth, 1/8" Offset, 1/4" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B00Q8N3D8Y | Model: FG-250-030 | PartNumber: FG-250-030 | Ean: 0728709129418 | UPC: 728709129418
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #5
Micro 100 FG-187-040-075 Grooving Tool - Face Grooving, 040" Width, 075" Proj, 3/16" Min Bore Dia, 3/4" Max Bore Depth, 3/32" Offset, 3/16" Shank Dia, 2" OAL, Uncoated
Asin: B09JQ8MT56
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #6
Micro 100 FG-375-125-200 Grooving Tool - Face Grooving, 1/8" Width, 200" Proj, 3/8" Min Bore Dia, 1-1/4" Max Bore Depth, 3/16" Offset, 3/8" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B09JQ6G2KG
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #7
Micro 100 FG-125-020-025 Grooving Tool - Face Grooving, 020" Width, 025" Proj, 1/8" Min Bore Dia, 3/8" Max Bore Depth, 1/16" Offset, 1/8" Shank Dia, 1-1/2" OAL, Uncoated
Asin: B09JQ4D77F
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #8
Micro 100 FG-250-017-025 Grooving Tool - Face Grooving, 017" Width, 025" Proj, 1/4" Min Bore Dia, 1" Max Bore Depth, 1/8" Offset, 1/4" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B09HV51G34
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #9
Micro 100 FG-180-030 Grooving Tool - Face Grooving, 030" Width, 050" Proj, 180" Min Bore Dia, 155" Max Bore Depth, 0862" Offset, 3/16" Shank Dia, 2" OAL, Uncoated
Asin: B09HV5162C
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #10
Micro 100 FG-250-062-150 Grooving Tool - Face Grooving, 1/16" Width, 150" Proj, 1/4" Min Bore Dia, 1" Max Bore Depth, 1/8" Offset, 1/4" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B09HV4LDZZ
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #11
Micro 100 FG-250-030-075 Grooving Tool - Face Grooving, 030" Width, 075" Proj, 1/4" Min Bore Dia, 1" Max Bore Depth, 1/8" Offset, 1/4" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B09HL52YNV
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #12
Micro 100 FG-250-040-075 Grooving Tool - Face Grooving, 040" Width, 075" Proj, 1/4" Min Bore Dia, 1" Max Bore Depth, 1/8" Offset, 1/4" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B09HL4MMB7
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #13
Micro 100 FG-625-062 Grooving Tool - Face Grooving, 1/16" Width, 075" Proj, 5/8" Min Bore Dia, 410" Max Bore Depth, 5/16" Offset, 5/8" Shank Dia, 3-1/2" OAL, Uncoated
Asin: B00Q8N4SQK | Model: FG-625-062 | PartNumber: FG-625-062 | Ean: 0728709129715 | UPC: 728709129715
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
Weight: 0.48 Pounds
See On Amazon #14
Micro 100 FG-500-093 Grooving Tool - Face Grooving, 3/32" Width, 100" Proj, 1/2" Min Bore Dia, 3/8" Max Bore Depth, 1/4" Offset, 1/2" Shank Dia, 3" OAL, Uncoated
Asin: B00Q8N4JLE | Model: FG-500-093 | PartNumber: FG-500-093 | Ean: 0728709129654 | UPC: 728709129654
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #15
Micro 100 FG-375-093 Grooving Tool - Face Grooving, 3/32" Width, 100" Proj, 3/8" Min Bore Dia, 320" Max Bore Depth, 3/16" Offset, 3/8" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B00Q8N4B6W | Model: FG-375-093 | PartNumber: FG-375-093 | Ean: 0728709129593 | UPC: 728709129593
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #16
Micro 100 FG-375-062X Grooving Tool - Face Grooving, 1/16" Width, 075" Proj, 3/8" Min Bore Dia, 285" Max Bore Depth, 3/16" Offset, 3/8" Shank Dia, 2-1/2" OAL, AlTiN
Asin: B00Q8N49VO | Model: FG-375-062X | PartNumber: FG-375-062X | Ean: 0728709129586 | UPC: 728709129586
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
Weight: 0.13 pounds
See On Amazon #17
Micro 100 FG-375-062 Grooving Tool - Face Grooving, 1/16" Width, 075" Proj, 3/8" Min Bore Dia, 285" Max Bore Depth, 3/16" Offset, 3/8" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B00Q8N48FQ | Model: FG-375-062 | PartNumber: FG-375-062 | Ean: 0728709129579 | UPC: 728709129579
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
First Available: 11/25/2017
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
Weight: 0.13 pounds
See On Amazon #18
Micro 100 FG-375-030 Grooving Tool - Face Grooving, 030" Width, 050" Proj, 3/8" Min Bore Dia, 275" Max Bore Depth, 3/16" Offset, 3/8" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B00Q8N45D6 | Model: FG-375-030 | PartNumber: FG-375-030 | Ean: 0728709129555 | UPC: 728709129555
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon #19
Micro 100 FG-312-050 Grooving Tool - Face Grooving, 050" Width, 050" Proj, 5/16" Min Bore Dia, 240" Max Bore Depth, 5/32" Offset, 5/16" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B00Q8N3WSK | Model: FG-312-050 | PartNumber: FG-312-050 | Ean: 0728709129517 | UPC: 728709129517
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
Weight: 0.09 Pounds
See On Amazon #20
Micro 100 FG-312-030 Grooving Tool - Face Grooving, 030" Width, 050" Proj, 5/16" Min Bore Dia, 240" Max Bore Depth, 5/32" Offset, 5/16" Shank Dia, 2-1/2" OAL, Uncoated
Asin: B00Q8N3NWK | Model: FG-312-030 | PartNumber: FG-312-030 | Ean: 0728709129470 | UPC: 728709129470
Split Geometry Makes The Tool As Rigid As Possible.
Sharp Corner Profile.
Relief Ground Along Maximum Bore Depth (L2) To Avoid Interference During Deep Hole Applications.
Polished Split Face For Improved Edge Retention And Chip Evacuation While Reducing Galling.
Features
- Designed for generating square grooves in the face of the part
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Relief ground along Maximum Bore Depth (L2) to avoid interference during deep hole applications
- Sharp corner profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
See On Amazon
Looking For Something Else?
Search