Michigan Motorsports LS MLS Exhaust Header Manifold Gasket Pair with Bolts 4.8 5.3 5.7 6.0 6.2
Asin: B0CB773WB7
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Includes 2 Mls Header/Manifold Gaskets And 12 Bolts -Enough For Both Heads.
Fits Gen Iii/Gen Iv 12617944 12600530.
Multilayer Steel (Mls) Gaskets Like Gm 12617944. Flanged Grade 10.9 Bolts M8 X 1.25 Thread 25Mm Underhead Length Fits Factory Exhaust Manifolds And Aftermarket Headers. Torque Spec For M8 Exhaust Bolts Is 18 Ft-Lb.
Fits All 1997-2013 Gen 3/4 Ls Based V8 Engines Including: Ls1 Ls2 Ls3 Ls6 Lq4 Lq9 Lm7 4.8 5.3 5.7 6.0 6.2.
Features
- LS Multi Layer Steel Exhaust Manifold Header Gasket Pair with 12pc Bolt Set
- Fits all 1997-2013 Gen 3/4 LS Based V8 Engines Including: LS1 LS2 LS3 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0 6.2
- Includes 2 MLS header/manifold gaskets and 12 bolts -Enough for both heads
- Multilayer Steel (MLS) Gaskets Like GM 12617944. Flanged Grade 10.9 Bolts M8 x 1.25 thread 25mm Underhead Length Fits Factory Exhaust Manifolds and Aftermarket Headers. Torque Spec for M8 exhaust bolts is 18 ft-lb
- Fits Gen III/Gen IV 12617944 12600530
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
Dimensions: 0.50 x 17.50 x 3.50 inches
See On Amazon Similar To Michigan Motorsports LS MLS Exhaust
#1
Michigan Motorsports LS Multi Layer MLS Header Manifold Exhaust Gasket Like 12617944 LS1 LS2 LS3 LS6 LQ4 LQ9 4.8 5.3 5.7 6.0 6.2
Asin: B08D8PRTW7
Qty 2- Ls Multi Layer Exhaust Gasket.
Fits Gen Iii/Gen Iv 12617944 12600530.
Ls1 Ls2 Ls6 4.8 5.3 5.7 6.0.
These Exhaust Manifold Gaskets Will Provide A Leak-Free Seal When Installing Your Exhaust Manifolds. These Exhaust Manifold Gaskets Are Made Of High-Grade Materials To Reduce The Chance Of A Blowout Under High Exhaust Temperatures Or Pressure..
Features
- LS Multi Layer Exhaust Gasket Replacement for 12617944 12600530 LS1 LS2 LS6 LQ4 LQ9 4.8 5.3 5.7 6.0 A Pair of Gaskets
- These exhaust manifold gaskets will provide a leak-free seal when installing your exhaust manifolds. These exhaust manifold gaskets are made of high-grade materials to reduce the chance of a blowout under high exhaust temperatures or pressure.
- QTY 2- LS Multi Layer Exhaust Gasket
- LS1 LS2 LS6 4.8 5.3 5.7 6.0
- Fits Gen III/Gen IV 12617944 12600530
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
Dimensions: 0.50 x 17.50 x 3.50 Inches
See On Amazon #2
Michigan Motorsports LS & LT Exhaust Manifold Header Bolts 12pc -Fits 1997-2021 LS1 LT1 4.8 5.3 5.7 6.0 6.2 7.0
Asin: B09HY3VR6G | Model: AD141 | PartNumber: AD141
Compatible With All Gm Ls & Lt Based Gen 3/4/5 Car And Truck Engines.
M8 X 1.25 Thread 25Mm Underhead Length Fits Factory Exhaust Manifolds And Aftermarket Headers.
Flanged Grade 10.9 Bolts Torque Spec For M8 Exhaust Bolts Is 18 Ft-Lb.
Fits All 1997-Newer Ls & Lt Based Gm V8 Car And Truck Engines.
Features
- Michigan Motorsports Exhaust Manifold & Header Bolt 12pc Set
- Fits all 1997-newer LS & LT Based GM V8 Car and Truck Engines
- Compatible with all GM LS & LT Based Gen 3/4/5 Car and Truck Engines
- Flanged Grade 10.9 Bolts Torque Spec for M8 exhaust bolts is 18 ft-lb
- M8 x 1.25 thread 25mm Underhead Length Fits Factory Exhaust Manifolds and Aftermarket Headers
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
Warranty: 30 Days
See On Amazon #3
GM LS Swap Cast Iron Exhaust Manifold LS1 LS2 LS3 4.8L 5.3L 6.0L Street Rod (DM-3303)
Asin: B09Z6LJH2H | Model: DM-3303 | PartNumber: DM-3303 | Ean: 0619222466282 | UPC: 619222466282
They Are Cast From High Silicon Moly Ductile Iron To Provide Durability, Leak Free Performance And Less Under The Hood Noise Than Conventional Headers..
They Also Feature 304 Stainless Steel Mating Flanges To Help Provide A Leak-Free Installation, And A Two Bolt Exit Flange Which Can Be Used With Oem Style Gaskets And Fasteners For An Excellent Seal..
The Ls Cast Iron Exhaust Manifolds Are Recommended For Strong Performance On Engines Up To 500 Horsepower And Are Available In Plain As Cast Finish Or With Ceramic Coatings For Reduced Engine Temperatures And Improved Corrosion Resistance..
Their Contoured Design Aims The Exhaust Directly At The Exit Port For Greatly Improved Flow..
Features
- These LS cast iron exhaust manifolds have been designed to hug close to the engine block so they fit into a wide variety of replacement engine swap applications.
- Their contoured design aims the exhaust directly at the exit port for greatly improved flow.
- They are cast from high silicon moly ductile iron to provide durability, leak free performance and less under the hood noise than conventional headers.
- The LS cast iron exhaust manifolds are recommended for strong performance on engines up to 500 horsepower and are available in plain as cast finish or with ceramic coatings for reduced engine temperatures and improved corrosion resistance.
- They also feature 304 stainless steel mating flanges to help provide a leak-free installation, and a two bolt exit flange which can be used with OEM style gaskets and fasteners for an excellent seal.
- See more on Amazon...
Brand: N\D | Manufacturer: N\D
See On Amazon #4
NEWZQ LS Swap Cast Iron Ex-haust Manifold Header 9988-R-BLEM Compatible with Chevy LS1 LS2 LS3 4.8L 5.3L 6.0L
Asin: B0BFVL1Q8R
Compatible With Custom Coupe 2-Door; Limited Coupe 2-Door; Base Coupe 2-Door; Ls Coupe 2-Door; Ss Coupe 2-Door.
Their Contoured Design Aims The Ex-Haust Directly At The Exit Port For Improved Flow..
Being Cast Iron Means They Will Provide Years Of Leak-Free Performance With Less Under Hood Noise Than Traditional Headers..
Compatible With Chevy Ls1 Ls2 Ls3 4.8L 5.3L 6.0L.
Features
- Customers are advised to compare Part OEM Number: 9988-R-BLEM
- Compatible with Chevy LS1 LS2 LS3 4.8L 5.3L 6.0L
- Compatible with Custom Coupe 2-Door; Limited Coupe 2-Door; Base Coupe 2-Door; LS Coupe 2-Door; SS Coupe 2-Door
- Being cast iron means they will provide years of leak-free performance with less under hood noise than traditional headers.
- Their contoured design aims the ex-haust directly at the exit port for improved flow.
- See more on Amazon...
Brand: NEWZQ | Manufacturer: NEWZQ
Dimensions: 19.69 x 10.24 x 8.66 Inches
See On Amazon #5
Michigan Motorsports MAP Sensor Adapter Wiring Harness 24" LS1 LS6 LS2 L76 Applications
Asin: B014O7RBJC | Ean: 8428700698617
Harness Is 24” Long Giving You Plenty Of Length To Relocate The Map Sensor.
Harness Attaches To The Engine Harness On One Side, And The Map Sensor On The Other Side. Harness Is 24” Long Giving You Plenty Of Length To Route. Ls2 L76 Use The Same Map Sensor As The Ls1 & Ls6. No Map Sensor Calibration Changes Are Needed When Swapping Engines..
Will Not Work With Ls3 Map Sensors..
Ls1 Ls6 Ls2 L76 Map Sensor Extension Adapter.
Features
- MAP sensor extension harness for applications with an LS2/L76 intake, and an LS1/LS6 wiring harness
- LS1 LS6 LS2 L76 MAP Sensor Extension Adapter
- Harness is 24 long giving you plenty of length to relocate the Map Sensor
- Will not work with LS3 MAP sensors.
- Harness attaches to the engine harness on one side, and the MAP sensor on the other side. Harness is 24 long giving you plenty of length to route. LS2 L76 use the same MAP sensor as the LS1 & LS6. No MAP sensor calibration changes are needed when swapping engines.
- See more on Amazon...
Brand: Michigan Motorsports
See On Amazon #6
Mievlyo LS MLS Exhaust Manifold Gasket Set GM Genuine Parts 12617944 MLS Header Exhaust Manifold Gasket for 97-16 LS1 LS3
Asin: B0CWG4X8CJ
Strict Quality Control Standards: We Adhere To Strict Quality Control Standards Throughout The Manufacturing Process, Ensuring That Each Gasket Meets Or Exceeds Oem Specifications..
Convenient Package: Each Package Includes 2 X Ls Mls Exhaust Manifold Gaskets, Providing You With Everything You Need For A Complete And Hassle-Free Installation..
Wide Compatibility: Our Gasket Set Is Compatible With A Wide Range Of Ls Series Engines, Including Ls1, Ls3, And Many More (Excluding Ls7). This Versatile Compatibility Ensures It Can Be Used In Various Vehicle Applications..
Direct Oem Replacement: Designed As A Direct Replacement For The Original Gasket, Our Gm Genuine Parts 12617944 Mls Header Exhaust Manifold Gasket Guarantees A Perfect Fit And Seamless Installation..
Features
- Premium Quality Construction: Our LS MLS Exhaust Manifold Gasket Set is crafted using high-quality Multi-Layer Steel (MLS) construction, ensuring durability and long-lasting performance.
- Direct OEM Replacement: Designed as a direct replacement for the original gasket, our GM Genuine Parts 12617944 MLS Header Exhaust Manifold Gasket guarantees a perfect fit and seamless installation.
- Strict Quality Control Standards: We adhere to strict quality control standards throughout the manufacturing process, ensuring that each gasket meets or exceeds OEM specifications.
- Wide Compatibility: Our gasket set is compatible with a wide range of LS series engines, including LS1, LS3, and many more (excluding LS7). This versatile compatibility ensures it can be used in various vehicle applications.
- Convenient Package: Each package includes 2 x LS MLS Exhaust Manifold Gaskets, providing you with everything you need for a complete and hassle-free installation.
- See more on Amazon...
Brand: Mievlyo | Manufacturer: Mievlyo
Dimensions: 4.33 x 20.47 x 6.69 Inches | Weight: 0.55 pounds
See On Amazon #7
ARP 4341301 Header Stud Kit for Chevy LS1
Asin: B003XUIMOK | Model: 434-1301 | PartNumber: 434-1301 | Ean: 0672036030599 | UPC: 672036030599
First Available: 06/05/2012
Brand: ARP | Manufacturer: ARP
Dimensions: 10.00 x 6.00 x 1.00 Inches | Weight: 0.55 Pounds
Warranty: Manufacturer Warranty
See On Amazon #8
ALLOYWORKS LS Swap Cast Iron Exhaust Manifold Header for Chevy LS1 LS2,LS3 4.8L 5.3L 6.0L
Asin: B0C4F6VLNC | Model: ALLOYWORKS-3019 | PartNumber: ALLOYWORKS-3019 | Ean: 0731036539591 | UPC: 731036539591
Material: Cast Iron.
Mounting Hardware Included: No.
Mounting Style: Bolt-On.
Placement On Vehicle: Front, Left, Right.
Features
- Type: Exhaust Manifold Header; LS Swap Cast Iron Exhaust Manifold Header LS1 LS2 LS3 4.8L 5.3L 6.0L Street Rod;
- Placement on Vehicle: Front, Left, Right
- Material: Cast Iron
- Mounting Style: Bolt-On
- Mounting Hardware Included: No
- See more on Amazon...
Brand: AW ALLOYWORKS | Manufacturer: AW ALLOYWORKS
Weight: 29.00 pounds
Warranty: Warranty: 1 year warranty against manufacture defect. Please contact us if you have any question! Your satisfaction is our aim!
We support Radiator 1 year Warranty Against Manufacture Defect and 30 days return,any doubts and problems please contact us first in your free time !
See On Amazon #9
Michigan Motorsports LS2 Fuel Rail Spacer Kit for LS1/LS6 Injectors on a LS2 Intake Manifold
Asin: B078RSTLR4
The Factory Ls1 Injectors Are Approximately 1/4" Taller Than The Factory Ls2 Injectors. They Also Have Smaller Bottom O-Rings Then A Ls2 Style Injector..
Only The Bottom O-Ring Must Be Changed As The Top Injector Pocket On Both Fuel Rails Are The Same Size. We Have Also Included A Set Of 4 Cnc Machined Spacers And New Bolts To Accomodate The Taller Ls1/Ls6 Injectors. (Intake Manifold, Fuel Rail, And Injectors Are Shown For Reference Only And Are Not Included.).
Using A Ls2 Bottom O-Ring On A Ls1 Injector It Will Cause A Fuel Leak Because The Id (Inner Diameter) Is A Different Size. Because Of This, A Custom O-Ring Must Be Used. As The Picture Shows, Our Custom O-Ring Is Significantly Larger Then The Stock One..
This Kit Will Fit All Ls1 And Ls6 Injectors Being Run On A Ls2 Intake Manifold With Ls2 Fuel Injector Rail..
Features
- LS2 Fuel Rail Spacer Kit. Use LS1/LS6 Injectors on a LS2 Intake Manifold.
- This kit will fit all LS1 and LS6 injectors being run on a LS2 intake manifold with LS2 fuel injector rail.
- The factory LS1 injectors are approximately 1/4 taller than the factory LS2 injectors. They also have smaller bottom o-rings then a LS2 style injector.
- Using a LS2 bottom o-ring on a LS1 injector it will cause a fuel leak because the ID (inner diameter) is a different size. Because of this, a custom o-ring must be used. As the picture shows, our custom o-ring is significantly larger then the stock one.
- Only the bottom o-ring must be changed as the top injector pocket on both fuel rails are the same size. We have also included a set of 4 CNC machined spacers and new bolts to accomodate the taller LS1/LS6 injectors. (Intake manifold, fuel rail, and injectors are shown for reference only and are not included.)
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
See On Amazon #10
Michigan Motorsports Black 1.06 Fuel Injector Spacer Adapter LS3 LS7 Bosch 210 Injectors on LS1 LS6 Intake Fuel Rail
Asin: B0865Z7V45 | Model: D4300 | PartNumber: D4300
These Adapters Use The Factory Injector Clip And Are Made From 6061-T6 Aircraft Grade Aluminum. They Are Cnc Cut On A Lathe For An Incredibly Precise Fit And A Leak Free Seal..
The Spacers Get Mounted On The Top Of The Injector. If You Were To Put Them On The Bottom, The Spray Pattern Of The Injector Would Get Messed Up And The Car Would Not Run Right..
We Also Include Viton Oil/Gas/Solvent Resistant O-Rings For A Long Lasting Seal. These Spacers Add Approximately 1.06" To Each Injector..
This Kit Will Add 1.06" To The Injector Allowing You To Run Gm Ls3, Ls7, Lsa, Ls9 Or Ev6/14/(Not Ev1) Style Bosch 210 Injectors In A Application Where A Ls1 Injector Height Would Normally Be Used..
Features
- Black Fuel Injector Spacer Use LS3 LS7 LSA LS9 Fuel Injectors on LS1 Intake Fuel Rail
- This kit will add 1.06 to the injector allowing you to run GM LS3, LS7, LSA, LS9 or EV6/14/(Not EV1) style Bosch 210 injectors in a application where a LS1 injector height would normally be used.
- These adapters use the factory injector clip and are made from 6061-T6 aircraft grade aluminum. They are CNC cut on a lathe for an incredibly precise fit and a leak free seal.
- We also include Viton oil/gas/solvent resistant o-rings for a long lasting seal. These spacers add approximately 1.06 to each injector.
- The spacers get mounted on the top of the injector. If you were to put them on the bottom, the spray pattern of the injector would get messed up and the car would not run right.
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
Weight: 0.25 Pounds
Warranty: 30 days from purchase date
See On Amazon #11
Michigan Motorsports Vehicle Speed Sensor VSS MAP Connector 2G DSM EVO Eclipse
Asin: B079TZHNS3
For 2G Dsm Evo Eclipse Mdp.
95-99 2G/Evo Mdp/Vss Speed Sensor Repair Connector Harness.
Features
- Vehicle Speed Sensor VSS or MAP connector pigtail For 2G DSM EVO Eclipse MDP
- 95-99 2G/EVO MDP/VSS speed sensor Repair Connector Harness
- For 2G DSM EVO Eclipse MDP
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
Dimensions: 0.25 x 3.00 x 3.00 Inches
See On Amazon #12
Michigan Motorsports EV6 USCAR Injector Connector Kit (QTY 8) for LS2, LS3, LS7, L99, LSA, L92, L76, L96, LMG, LMF, LH6, LC9, LY2, L20
Asin: B0CBL3W18P | Model: C5600-8 | PartNumber: C5600-8
Our Michigan Motorsports Ev6 Injector Connector Kit Is A Cleaner, More Attractive Alternative To Splicing In Pigtails..
This Connector Is Commonly Used On 2007-2013 Ls-Based V8 Engines, As Well As On Many Aftermarket Fuel Injectors And Other Oem Applications..
Includes Connector Body, Seals, Crimp Terminals And Terminal Lock..
Set Of 8 Connectors.
Features
- EV6 USCAR Injector Connector Kit
- Set of 8 Connectors
- Our Michigan Motorsports EV6 Injector Connector Kit is a cleaner, more attractive alternative to splicing in pigtails.
- Includes connector body, seals, crimp terminals and terminal lock.
- This connector is commonly used on 2007-2013 LS-Based V8 engines, as well as on many aftermarket fuel injectors and other OEM applications.
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
Warranty: 30 Days from Purchase Date
See On Amazon #13
Michigan Motorsports Gen 4 LS Connecting Rod Bolt GM 11570662 2005-2013 4.8L 5.3L 6.0L 6.2L LS2 LS3 L96 L99 L92 LC9 LMG
Asin: B0C2B3LT4H | Model: 11570662-Single | PartNumber: 11570662-Single
This Listing Is For A Single Oem Gm Rod Bolt.
Genuine Gm 11570662.
Cap Retention Style: Cap Screw Thread Size: M9 X 1.0 Connecting Rod Bolt Diameter: 9Mm Connecting Rod Bolt Material: Steel Underhead Length (In.): 1.654 In. Underhead Length (Mm): 42.00Mm Nuts Included: No Wrench Diameter: 12Mm.
For Use In Gen 4 Style Rods Only, Not To Be Used In Gen 3 Rods..
Fits 2005-2013 Ls-Based V8 Engines 4.8L 5.3L 6.0L 6.2L.
Features
- Connecting Rod Bolt for Gen 4 LS-Based Engines
- Fits 2005-2013 LS-Based V8 Engines 4.8L 5.3L 6.0L 6.2L
- This listing is for a single OEM GM Rod Bolt
- For use in Gen 4 style rods only, not to be used in Gen 3 rods.
- Genuine GM 11570662
- Cap Retention Style: Cap screw Thread Size: M9 x 1.0 Connecting Rod Bolt Diameter: 9mm Connecting Rod Bolt Material: Steel Underhead Length (in.): 1.654 in. Underhead Length (mm): 42.00mm Nuts Included: No Wrench Diameter: 12mm
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: GM
Dimensions: 0.50 x 2.00 x 0.50 Inches
See On Amazon #14
Michigan Motorsports BTR Delphi LS7 Lifters Set of 16 Brian Tooley Racing like 12499225 (Lifters & Trays) Fits 4.8 5.3 5.7 6.0 6.2 7.0 LS LS1 LS2 LS3 LQ4 LQ9 LM7 LM4 L96 L83 L87 Gen 3, Gen 4, Gen 5
Asin: B0CNDXS8Z5 | Model: BTR X12499225-16 | PartNumber: BTR X12499225-16
Choose Lifters Only Or Lifters And Trays. We Always Recommend The Use Of New, Factory Type Lifter Guide Trays When Installing New Lifters!.
When Receiving Your New Ls7 Lifters We Recommend Removing Them From The Packaging And Checking For Any Obvious Signs Of Damage To The Lifter Body Or Wheels. The Lifters Should Then Be Washed In Either An Automotive Solvent Tank Or With Mineral Spirits To Help Remove The Stiff Packing Grease Used During Lifter Assembly. We Then Recommend You Check Rollers For Any Binding Or Roughness Before Soaking..
Btr Delphi Ls7 Lifter Cleaning Procedure:.
Full Set Of 16 Delphi Hydraulic Roller Lifters, Also Known As Ls7 Lifters, In Btr Packaging. These Will Also Work In Sbc And Lt1 Applications That Originally Came With Hydraulic Roller Lifters..
Features
- Brian Tooley Racing Delphi Hydraulic LS7 Lifter Set X12499225-16 No manufacturer warranty on lifters
- Full set of 16 Delphi hydraulic roller lifters, also known as LS7 lifters, in BTR packaging. These will also work in SBC and LT1 applications that originally came with hydraulic roller lifters.
- Choose lifters only or lifters and trays. We always recommend the use of new, factory type lifter guide trays when installing new lifters!
- BTR Delphi LS7 lifter cleaning procedure:
- When receiving your new LS7 lifters we recommend removing them from the packaging and checking for any obvious signs of damage to the lifter body or wheels. The lifters should then be washed in either an automotive solvent tank or with mineral spirits to help remove the stiff packing grease used during lifter assembly. We then recommend you check rollers for any binding or roughness before soaking.
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: BTR Brian Tooley Racing
Warranty: No Warranty on Lifters
See On Amazon #15
Michigan Motorsports LS Front Rear Cover Oil Pan Alignment Tool Kit Fits Engines 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LSA
Asin: B07NZYKS49 | Model: 8542035410 | PartNumber: 8542035410
On The Ls Engine, The Oil Pan Is A Stressed Member And Adds To Block Rigidity. For This Reason, It Can't Simply Be Slapped In Place; Along With The Front And Rear Engine Covers, It Must Be Carefully Aligned With The Block..
Tools Are Non-Returnable Items. You Are Buying A Tool That Is Used To Install The Front Cover On Any Gm Ls Engine. This Tool Mimics The Balancer To Center The Cover On The Front Seal Or Locates On The Id Of The Seal Bore In The Cover Without The Seal Installed.You Will Have To Exercise Care To Align Horizontally The Cover To The Oil Pan. See Product Description For Install Instructions..
For This Reason, It Can't Simply Be Slapped In Place; Along With The Front And Rear Engine Covers, It Must Be Carefully Aligned With The Block..
Gm Ls1, Ls2, Ls3, Ls7, Lsa And Ls9 V8 Engines Utilize Front And Rear Seals With Teflon Inner Sealing Lips. For Proper Seal Function And Longevity It Is Critical That The Seals Be Aligned Perfectly Concentric To The Front Diameter On The Balancer Hub And Rear Sealing Surface On..
Features
- LS Front Rear Cover and Oil Pan Alignment Tool Kit 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92
- GM LS1, LS2, LS3, LS7, LSA and LS9 V8 engines utilize front and rear seals with Teflon inner sealing lips. For proper seal function and longevity it is critical that the seals be aligned perfectly concentric to the front diameter on the balancer hub and rear sealing surface on.
- On the LS engine, the oil pan is a stressed member and adds to block rigidity. For this reason, it can't simply be slapped in place; along with the front and rear engine covers, it must be carefully aligned with the block.
- For this reason, it can't simply be slapped in place; along with the front and rear engine covers, it must be carefully aligned with the block.
- Tools are non-returnable items. You are buying a tool that is used to install the front cover on any GM LS engine. This tool mimics the balancer to center the cover on the front seal OR locates on the ID of the seal bore in the cover without the seal installed.You will have to exercise care to align horizontally the cover to the oil pan. See product description for install instructions.
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
See On Amazon #16
LS MLS Header Exhaust Manifold Gasket Set Multi-Layer Fits 97-16 LS1 LS3
Asin: B08TT281B5
Brand: 269 Motorsports | Manufacturer: 269 Motorsports
See On Amazon #17
Michigan Motorsports Texas Speed TSP 7.400" Pushrods Fits 4.8 5.3 5.7 6.0 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92
Asin: B087QTK2HG
These Are The Stock Length 7.400" Long 5/16" Chromoly .080 Wall Pushrods.
Sae 4130 Chromoly Tubing.
Excellent Upgrade When Replacing Rocker Arms Or Cams.
Fits 4.8 5.3 5.7 6.0 Ls1 Ls2 Ls3 Ls6 L99 Ls4 Ls9 Lsa Lq4 Lq9 L76 L92.
Features
- Texas Speed TSP LS 7.400" Pushrods
- Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92
- These are the stock length 7.400 Long 5/16 Chromoly .080 Wall pushrods
- Excellent Upgrade when Replacing Rocker Arms or Cams
- SAE 4130 Chromoly Tubing
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
See On Amazon #18
Michigan Motorsports Brian Tooley Racing BTR LS1 LS2 LS6 N/A Stage IV Camshaft Naturally Aspirated, Includes Spring Set/Titanium Retainers, Pushrods & Gasket Kit
Asin: B07Q4R2LKK | Model: BTR33542113 | PartNumber: BTR33542113
The Largest Offering In Our Na Ls1/Ls2/Ls6 Lineup, The Stage 4 Has Proven It's Worth Time And Time Again..
A Proper Set Of Cylinder Heads Will Make This Camshaft Come Alive! Will Require An Aftermarket Stall Converter. Consult Your Tuner Regarding Stall Speed Needs!.
The Stage 4 Sacrafices A Small Amount Down Low While On A Mission To Make Max Peak Power. It Is Not Uncommon To See 460+Whp With The Proper Supporting Mods..
Includes 7.400" Ls Chromoly Pushrods, Btr Platinum Dual Springs, Titanium Retainers, Spring Locators; .505" Id, .060" Thick, Ls Valve Seal Kit; Set Of 8 Black Intake Seals And 8 Brown Exhaust, Ls Valve Locks 7 Degree Bead Lock Set Of 32 Includes Cam Install Gasket Kit, Front Timing Cover Gasket, Timing Cover Damper, Seal Water Pump Gaskets, Ls Crankshaft Damper Bolt.
Features
- Brian Tooley Racing BTR STAGE 4 (LS1/LS2/LS6) NA CAMSHAFT Specs: 233/248 .630"/.615" 111.5+2.5 SUPERSEDED TO - 33348123R0
- Includes 7.400 LS Chromoly Pushrods, BTR Platinum dual springs, Titanium Retainers, Spring Locators; .505 ID, .060 Thick, LS Valve Seal Kit; Set of 8 Black Intake Seals and 8 Brown Exhaust, LS VALVE LOCKS 7 DEGREE BEAD LOCK SET OF 32 Includes CAM INSTALL GASKET KIT, Front Timing Cover Gasket, Timing Cover Damper, Seal Water Pump Gaskets, LS CRANKSHAFT DAMPER BOLT
- The largest offering in our NA LS1/LS2/LS6 lineup, the Stage 4 has proven it's worth time and time again.
- The stage 4 sacrafices a small amount down low while on a mission to make max peak power. It is not uncommon to see 460+whp with the proper supporting mods.
- A proper set of cylinder heads will make this camshaft come alive! Will require an aftermarket stall converter. Consult your tuner regarding stall speed needs!
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
Warranty: 30 Days from Purchase Date
See On Amazon #19
Michigan Motorsports Black Fuel Injector Adapter Spacer 1.04" Short Siemens Deka Injector to LS1 Intake
Asin: B0867BTBYC
We Also Include Viton Oil/Gas/Solvent Resistant O-Rings For A Long Lasting Seal. These Spacers Add Approximately 1.04" To Each Injector..
The Spacers Get Mounted On The Top Of The Injector. If You Were To Put Them On The Bottom, The Spray Pattern Of The Injector Would Get Messed Up And The Car Would Not Run Right..
This Kit Will Allow You To Run Siemens Deka Short Injectors In A Application Where A Ls1 Injector Height Would Normally Be Used. These Adapters Use A Factory Ls2, Ls3, Ls7 Injector Clip And Are Made From 6061-T6 Aircraft Grade Aluminum. They Are Cnc Cut On A Lathe For An Incredibly Precise Fit And A Leak Free Seal..
Features
- Black Fuel Injector Adapter Spacer Short Siemens Deka Injector to LS1 Intake
- This kit will allow you to run Siemens Deka short injectors in a application where a LS1 injector height would normally be used. These adapters use a factory LS2, LS3, LS7 injector clip and are made from 6061-T6 aircraft grade aluminum. They are CNC cut on a lathe for an incredibly precise fit and a leak free seal.
- We also include Viton oil/gas/solvent resistant o-rings for a long lasting seal. These spacers add approximately 1.04 to each injector.
- The spacers get mounted on the top of the injector. If you were to put them on the bottom, the spray pattern of the injector would get messed up and the car would not run right.
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
See On Amazon
Looking For Something Else?
Search