YuqiaoTime FNIRSI DPOX180H Handheld Dual Channel Digital Oscilloscope 180MHz-3DB 2 In 1 Function Signal Generator Fluorescence Display ZOOM
Asin: B0CBF662QT | Model: YQ-DPOX180H | PartNumber: YQ-DPOX180H
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Ultra-High Signal-To-Noise Ratio, Fully Sealed Shielding Measures, Stable Circuit Feedback Design, Clean And Clear Waveform. The Original Adjustable Automatic Bandwidth Limit And Adaptive Adjustable Trigger Suppression Are Suitable For Analyzing And Measuring Signals With Relatively Large Noise. 20M Hardware Bandwidth Limit, Can Filter Out Noise Above 20Mhz..
It Has Three-Time Base Modes Of Yt, Xy, And Rolling. Manual Cursor Measurement Is Suitable For Measurements With Large Noise Signals. Efficient One-Button Automatic Adjustment, Adaptive 25%, 50%, And 75% Electric Level Trigger Only Take 2 Seconds To Measure 1Vpp/1Khz. Save Waveforms And Screenshots With One Key, Up To 250 Sets Of Waveform Data Or 90 Pictures Can Be Stored, And 500 Intercepted Wave Data Can Be Stored At The Same Time..
The Trigger Adopts Digital Trigger Technology With High Precision. It Has Three Trigger Modes: Automatic/Single/Normal. It Has A Strong Ability To Capture Periodic Signals, Burst Signals, And Protocol Signals. The Dds Signal Generator Has 14 Kinds Of Function Signal Waveforms And A Free-Customized Chopping Waveform. The Frequency Of The Sine Wave Can Reach Up To 20Mhz, And The Other Waveforms Can Reach Up To 10Mhz..
The Waveform Display Effect Is Good, And The Colorways Are Grayscale And Color Temperature. With A Waveform Refresh Rate Of Up To 50000Wfm/S, Displaying Abnormal Signals With Low Probability Is Easier. The Time Base System Includes A Zoom Time Base For Easy Analysis Of Digital Protocol Signals. With A Vertical Sensitivity As Low As 5Mv, It Can Better Measure Small Signals Of 5Mvpp..
Features
- DPOX180H is a cost-effective handheld dual-channel digital phosphor oscilloscope launched by FNIRSI with a two-in-one oscilloscope and signal generator. The oscilloscope has a real-time sampling rate of 500MSPS and an analog bandwidth of 180MHz. In terms of display, a high-contrast 2.8-inch IPS full-vision LCD screen and digital fluorescent technology are used.
- The waveform display effect is good, and the colorways are grayscale and color temperature. With a waveform refresh rate of up to 50000wfm/s, displaying abnormal signals with low probability is easier. The time base system includes a ZOOM time base for easy analysis of digital protocol signals. With a vertical sensitivity as low as 5mV, it can better measure small signals of 5mVPP.
- Ultra-high signal-to-noise ratio, fully sealed shielding measures, stable circuit feedback design, clean and clear waveform. The original adjustable automatic bandwidth limit and adaptive adjustable trigger suppression are suitable for analyzing and measuring signals with relatively large noise. 20M hardware bandwidth limit, can filter out noise above 20MHz.
- The trigger adopts digital trigger technology with high precision. It has three trigger modes: automatic/single/normal. It has a strong ability to capture periodic signals, burst signals, and protocol signals. The DDS signal generator has 14 kinds of function signal waveforms and a free-customized chopping waveform. The frequency of the sine wave can reach up to 20MHz, and the other waveforms can reach up to 10MHz.
- It has three-time base modes of YT, XY, and rolling. Manual cursor measurement is suitable for measurements with large noise signals. Efficient one-button automatic adjustment, adaptive 25%, 50%, and 75% electric level trigger only take 2 seconds to measure 1VPP/1KHz. Save waveforms and screenshots with one key, up to 250 sets of waveform data or 90 pictures can be stored, and 500 intercepted wave data can be stored at the same time.
- See more on Amazon...
Brand: YuqiaoTime | Manufacturer: Shen Zhen Shi Fei Ni Rui Si Technology Co.,Ltd(FNIRSI)
Dimensions: 3.94 x 7.87 x 3.94 Inches
See On Amazon Similar To YuqiaoTime FNIRSI DPOX180H Handheld Dual
#1
FNIRSI 1013D Plus Oscilloscope - Portable Handheld Tablet Oscilloscope with 100X High Voltage Probe, 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate 7" TFT LCD Touch Screen
Asin: B0BHHYMVKV
Easy To Operate: Equipped With Efficient One-Button Automatic Device. One-Click Waveform Saving And Screenshots. The Built-In 1Gb Storage Space Can Store Up To 1000 Screenshots 1000 Sets Of Waveform Data.Powerful Waveform Picture Manager Supports Thumbnail Browsing, Viewing, Detailed Viewing, Page Turning, Deletion And Waveform Zooming In, Zooming Out, Moving, Etc.
Lissajous Graphic Display & Fft Viewing: Lissajous Graphic Display Function Can Be Used To Compare The Amplitude, Frequency And Phase Of The Two Sets Of Signals. Fft Viewing Function Can Roughly Estimation Of The Harmonic Content Of The Signal..
Easily Measuring : Capacitive Screen Touch & Gesture Operation, Cursor Measurement Function, When Manually Reading Amplitude-Frequency Parameters, You Do Not Need To Read The Background Scale Unit And Quantity, And You Can Directly Get The Peak-To-Peak Value And Frequency Without Conversion..
Highly Performance: 7 Inches, 800 * 480 Resolution, Bright Colors And High Contrast. Ultra-Thin And Easy To Carry. Built-In High-Voltage Protection Module,Can Tolerate A Continuous Voltage Of Up To 400V. 6000Mah High-Performance Lithium Battery, Can Be Used Continuously For 4 Hours After Fully Charged..
Features
- Professional Designed: FNIRSI oscilloscope has a real-time sampling rate of up to 1GSA/S and an analog bandwidth of 100MHZ * 2. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.
- Highly Performance: 7 inches, 800 * 480 resolution, bright colors and high contrast. Ultra-thin and easy to carry. Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V. 6000mAh high-performance lithium battery, can be used continuously for 4 hours after fully charged.
- Easy to Operate: Equipped with efficient one-button automatic device. One-click waveform saving and screenshots. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc
- Easily Measuring : Capacitive screen touch & gesture operation, cursor measurement function, when manually reading amplitude-frequency parameters, you do not need to read the background scale unit and quantity, and you can directly get the peak-to-peak value and frequency without conversion.
- Lissajous Graphic Display & FFT Viewing: Lissajous graphic display function can be used to compare the amplitude, frequency and phase of the two sets of signals. FFT viewing function can roughly estimation of the harmonic content of the signal.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
See On Amazon #2
FNIRSI DPOX180H 2 Channels Digital Phosphor Oscilloscope, 2 in 1 Handheld Oscilloscope DDS Signal Generator, 180Mhz Bandwidth 500MSa/s Sampling Rate, Innovative Digital Trigger System
Asin: B0C5M3FQXB | Model: DPOX180H | PartNumber: DPOX180H
Unique And Innovative Features：Adjustable Automatic Bandwidth Limit, According To The Current Time Base Range, Automatically Adjust The Bandwidth Limit (The Function Can Be Turned On Or Off) For The Analysis And Measurement Of Signals Containing Noise. Adaptive Adjustable High-Frequency Rejection, According To The Waveform Frequency Characteristics Of The Trigger To Suppress High-Frequency Components, Regardless Of The Signal Frequency Or Noise Size Can Be Stable Trigger, Suitable For Analysis And Measurement Of Large Noise Signals..
Easily Measuring : Equipped With High-Efficiency One-Button Auto, Adaptive 25%, 50%, 75% Trigger, Can Display The Measured Waveform Without Cumbersome Adjustment. Fft Spectrum Display..
Storage Function : One Click To Save Screenshot Or Waveform, With Its Own Data Storage, You Can View The Saved Screenshot File And Waveform Data. Data Can Be Exported Via Usb Connection To A Computer..
Function Signal Generator : Built-In 20M Dds Function Signal Generator, With 14 Kinds Of Standard Function Signals, Output Amplitude Fixed At 1Vpp, Sine Wave Frequency Of 20Mhz, Other Waveform Frequency Of 10Mhz, Adjustable Frequency Step Of 1Hz. Contains The Original Chopping Technology, Intercept Part Of The Oscilloscope Measurement Of Complex Signals As The Output Signal Of The Signal Generator, Than The Traditional Signal Generator Hand-Drawn Signal More Objective And Realistic..
Professional Designed : 2 Channels Handheld Oscilloscope & Dds Signal Generator, 180Mhz Bandwidth 500Msa/S Sampling Rate, Innovative Digital Trigger System, Cursor Measurement Function, 5Mv Sensitivity, 50000Wfm/S Waveform Refresh Rate, 2.8-Inch Ips Full-Vision High-Definition Display, Built-In 4.2V/3000Mah Lithium Battery, Automatic Shutdown Setting, High-Voltage Anti-Burning Protection..
Features
- Digital Phosphor Oscilloscope FNIRSI DPOX180H Oscilloscope uses the latest digital phosphor technology to overcome the traditional oscilloscope due to noise caused by the waveform burr feeling. Color temperature display function can more clearly see the distribution of the signal, probability characteristics and the rise and fall time of the step signal fast and slow. X-Y mode with digital phosphor technology for comparison of amplitude, frequency and phase of two groups of signals.
- Professional Designed : 2 channels handheld oscilloscope & DDS signal generator, 180mhz bandwidth 500msa/s sampling rate, innovative digital trigger system, cursor measurement function, 5mv sensitivity, 50000wfm/s waveform refresh rate, 2.8-inch IPS full-vision high-definition display, built-in 4.2v/3000mah lithium battery, automatic shutdown setting, high-voltage anti-burning protection.
- Unique and Innovative Features Adjustable automatic bandwidth limit, according to the current time base range, automatically adjust the bandwidth limit (the function can be turned on or off) for the analysis and measurement of signals containing noise. Adaptive adjustable high-frequency rejection, according to the waveform frequency characteristics of the trigger to suppress high-frequency components, regardless of the signal frequency or noise size can be stable trigger, suitable for analysis and measurement of large noise signals.
- Function Signal Generator : Built-in 20M DDS function signal generator, with 14 kinds of standard function signals, output amplitude fixed at 1VPP, sine wave frequency of 20MHz, other waveform frequency of 10MHz, adjustable frequency step of 1Hz. Contains the original chopping technology, intercept part of the oscilloscope measurement of complex signals as the output signal of the signal generator, than the traditional signal generator hand-drawn signal more objective and realistic.
- Easily Measuring : Equipped with high-efficiency one-button AUTO, adaptive 25%, 50%, 75% trigger, can display the measured waveform without cumbersome adjustment. FFT spectrum display.
- Storage Function : One click to save screenshot or waveform, with its own data storage, you can view the saved screenshot file and waveform data. Data can be exported via USB connection to a computer.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
Warranty: 60 day manufacturer
See On Amazon #3
FNIRSI 2C53P Handheld Tablet Oscilloscope Multimeter DDS Signal Generator 3 in 1, 2CH Automotive Oscilloscope Multimeters with 50Mhz Bandwidth, 19999 Counts, 250MS/s Sampling, 4.3 inch Touch Screen
Asin: B0D3L78C6K | Model: FNIRSI-2C53P | PartNumber: FNIRSI-2C53P
【Feature-Rich】The Dds Signal Generator Can Output 12 Waveforms, The Maximum Waveform Output Frequency Can Reach 10Mhz. Multimeter 19999 Counts, 5 Measuring Values, Maximum And Minimum Real -Time Display. Efficient One-Key Auto, Quickly Measure, Simplify Operations..
【Long-Lasting Battery Life】The Digital Oscilloscope Has A Built-In 4000Mah Lithium Battery With A Battery Life Of About 4 Hours, And Supports Type-C Interface Charging To Ensure Uninterrupted Work..
【Powerful Technology】4.3-Inch Ips Ultra-High Definition Touch Screen, 480*272 High Resolution. Fpga+Mcu+Adc Hardware Structure Can Ensure A Strong Waveform Capture Function. Support Waveform Preservation, View And Export Analysis. Support Automatic/Normal/Single Trigger Function..
【Precise Analysis】Portable Automotive Oscilloscope Has Afterglow, Fft Spectrum Analysis, Cursor Measurement, Lissajous Graphics Display, Etc., To Visually Display The Signal Relationship, Quickly Analyze The Signal Frequency Ingredients, And Enhance The Accuracy Of Measurement..
Features
- Professional Instrument The handheld oscilloscope has three modes: oscilloscope, DDS signal generator and multimeter, with 2 channels, 250MS/s high sampling rate and 50Mhz bandwidth, and can measure voltages up to 400V.
- Precise Analysis Portable automotive oscilloscope has afterglow, FFT spectrum analysis, cursor measurement, LISSAJOUS graphics display, etc., to visually display the signal relationship, quickly analyze the signal frequency ingredients, and enhance the accuracy of measurement.
- Feature-rich The DDS signal generator can output 12 waveforms, the maximum waveform output frequency can reach 10MHz. Multimeter 19999 counts, 5 measuring values, maximum and minimum real -time display. efficient one-key AUTO, quickly measure, simplify operations.
- Powerful technology 4.3-inch IPS ultra-high definition touch screen, 480*272 high resolution. FPGA+MCU+ADC hardware structure can ensure a strong waveform capture function. Support waveform preservation, view and export analysis. Support automatic/normal/single trigger function.
- Long-lasting battery life The digital oscilloscope has a built-in 4000mAh lithium battery with a battery life of about 4 hours, and supports Type-C interface charging to ensure uninterrupted work.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
See On Amazon #4
FNIRSI DSO153 Handheld Digital Oscilloscope 2.8" HD LCD Screen Signal Generator 2in1 5MSa/s 1MHz Analog Bandwidth 800 VPP with PMW Electronic Tools, Trigger Function Auto/Nomal/Single (High Standard)
Asin: B0D1C6CSXF
【Portable Mini Oscilloscope] Pocket Oscilloscope Is An Assembled Finished Machine, Lightweight And Portable, Can Be Used Directly, To Avoid The Problem Of Assembly And Welding Process, Greatly Saving Assembly Time. Applicable To The Maintenance Industry And R & D Education Industry. The Highly Practical Oscilloscope Can Meet Your Daily Testing Needs..
【Longer Battery Life】The Automotive Oscilloscope Has A Built-In 1000Mah High Quality Lithium Battery, Which Can Be Used Continuously For About 4 Hours After Fully Charged. Also Equipped With Type-C Charging Cable, You Can Also Use It While Charging, Very Convenient. In Addition, It Is Equipped With A Multi-Function Signal Generator (10Khz)..
【Easy Measurement】Equipped With Efficient One-Button Automatic Setup Of All Parameters, No Need For Cumbersome Adjustments To Display The Measurement Waveform. With Efficient One-Key Auto, It Can Display The Measured Waveforms Without Complicated Adjustments, Measure Waveforms Quickly And Improve Work Efficiency..
【Professional Design】With Full Trigger Function (Single, Normal, Auto). Ideal For Periodic Analog Signals And Non-Periodic Digital Signals. 2.8-Inch Hd Lcd Display With 320*240 Resolution, Type-C Interface Supports Data Transfer And Charging. Support Interface To Update Firmware Directly..
Features
- Faster Sampling Rate FNIRSI DSO153 is an upgraded model of DSO152, the mini oscilloscope real-time sampling rate is upgraded to 5MS/s with a bandwidth of 1MHz. The probe can measure up to 800VPP, which is equivalent to 280V AC. It can measure voltages up to 400V. DSO-153 is a practical and cost-effective handheld oscilloscope for the maintenance industry and development education industry.
- Professional Design With full trigger function (single, normal, auto). Ideal for periodic analog signals and non-periodic digital signals. 2.8-inch HD LCD display with 320*240 resolution, Type-C interface supports data transfer and charging. Support interface to update firmware directly.
- Portable Mini Oscilloscope] Pocket oscilloscope is an assembled finished machine, lightweight and portable, can be used directly, to avoid the problem of assembly and welding process, greatly saving assembly time. Applicable to the maintenance industry and R & D education industry. The highly practical oscilloscope can meet your daily testing needs.
- Easy Measurement Equipped with efficient one-button automatic setup of all parameters, no need for cumbersome adjustments to display the measurement waveform. With efficient one-key AUTO, it can display the measured waveforms without complicated adjustments, measure waveforms quickly and improve work efficiency.
- Longer Battery Life The automotive oscilloscope has a built-in 1000mAh high quality lithium battery, which can be used continuously for about 4 hours after fully charged. Also equipped with type-c charging cable, you can also use it while charging, very convenient. In addition, it is equipped with a multi-function signal generator (10KHz).
- See more on Amazon...
Brand: OUGETHER | Manufacturer: OUGETHER
See On Amazon #5
FNIRSI ADS1014D Dual Channel Digital Storage USB Oscilloscope with Function Signal Generator 100MHz 1GSa/s 240Kb, 7"LCD
Asin: B0BHVH9PXK
Built-In High Voltage Protection Design, Our Oscilloscope Can Bear As Large As 400V Continuous Voltage Without Burning Out..
Equipped With Usb Port, The Oscilloscope Can Be Connected To Computer, Convenient To Use And Carry Around For Secondary Analysis..
With One-Button Automatic Operation, You Just Need One Key To Save The Waveform And Can Store Up To 1000 Screenshots And 1000 Groups Of Waveform Data..
The Oscilloscope Supports 12 Kinds Of Functional Signals With Cursor Measurement Function, Convenient To Measure Period, Frequency And Voltage..
Features
- 7-inch colorful LCD screen with 800*480 resolution, the screen brightness and background grid brightness of our oscilloscope is adjustable according to your needs.
- The oscilloscope supports 12 kinds of functional signals with cursor measurement function, convenient to measure period, frequency and voltage.
- Built-in high voltage protection design, our oscilloscope can bear as large as 400V continuous voltage without burning out.
- With one-button automatic operation, you just need one key to save the waveform and can store up to 1000 screenshots and 1000 groups of waveform data.
- Equipped with USB port, the oscilloscope can be connected to computer, convenient to use and carry around for secondary analysis.
- See more on Amazon...
Brand: Vorole | Manufacturer: Vorole
See On Amazon #6
FNIRSI-138 PRO Handheld Digital Oscilloscope 2.5MSa/s 200KHz Analog Bandwidth Support AUTO,80Khz PWM and Firmware Update(with The Bluetooth and p6100 hv Prove)
Asin: B0CBP7R674 | Model: 138 Pro+battery+p6100 | PartNumber: 138 Pro+battery+p6100
Works Perfectly For Both Periodic Analog Signals And Aperiodic Digital Signals. Voltages Up To ±400V Can Be Measured. Equipped With Efficient One-Key Auto, The Measured Waveform Can Be Displayed Without Cumbersome Adjustment..
The Display Is Equipped With A 2.4-Inch High-Definition Lcd Screen With A Resolution Of 320*240. Built-In 1000Mah High-Quality Lithium Battery, A Full Charge Can Be Used Continuously For About 5 Hours..
The Oscilloscope Has A Real-Time Sampling Rate Of 2.5Ms/S And A 200Khz Bandwidth. With Full Trigger Function (Single, Normal, Automatic),.
Features
- FNIRSI-138 PRO is a highly practical and cost-effective MINI handheld oscilloscope launched by FNIRSI, which is aimed at the maintenance industry and the R&D education industry.
- The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200KHz bandwidth. With full trigger function (single, normal, automatic),
- Works perfectly for both periodic analog signals and aperiodic digital signals. Voltages up to 400V can be measured. Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.
- The display is equipped with a 2.4-inch high-definition LCD screen with a resolution of 320*240. Built-in 1000mah high-quality lithium battery, a full charge can be used continuously for about 5 hours.
- See more on Amazon...
Brand: QDTimes | Manufacturer: FNIRSI
Dimensions: 3.94 x 11.81 x 3.94 inches | Weight: 1.10 pounds
Warranty: 1 Year warranty
See On Amazon #7
Digital Oscilloscope, DPOX180H Handheld Dual Channel Digital Oscilloscope 180MHz-3DB 2 in 1 Function Signal Generator Fluorescence Display Portable and Easy to Use
Asin: B0CZ9BRQLK | Ean: 9098807500107
In Terms Of Display, A High-Contrast 2.8-Inch Ips Full-Vision Lcd Screen And Digital Fluorescent Technology Are Used..
With A Waveform Refresh Rate Of Up To 50000Wfm/S, It Is Easier To Display Abnormal Signals With Low Probability..
The Waveform Display Effect Is Good, And The Color Ways Are Grayscale And Color Temperature..
The Oscilloscope Has A Real-Time Sampling Rate Of 500Msps And An Analog Bandwidth Of 180Mhz..
Features
- Handheld dual-channel digital phosphor oscilloscope launched with a two-in-one oscilloscope and signal generator.
- The oscilloscope has a real-time sampling rate of 500MSPS and an analog bandwidth of 180MHz.
- In terms of display, a high-contrast 2.8-inch IPS full-vision LCD screen and digital fluorescent technology are used.
- The waveform display effect is good, and the color ways are grayscale and color temperature.
- With a waveform refresh rate of up to 50000wfm/s, it is easier to display abnormal signals with low probability.
- See more on Amazon...
Manufacturer: ZHDBD
See On Amazon #8
QDTimes Oscilloscope FNIRSI DPOX180H Handheld Dual Channel Digital Oscilloscope 180MHz-3DB 2 in 1 Function Signal Generator Fluorescence Display Zoom
Asin: B0CBP9W1WF | Model: QD-DPOX180H | PartNumber: QD-DPOX180H
The Original Adjustable Automatic Bandwidth Limit And Adaptive Adjustable Trigger Suppression Are Suitable For Analyzing And Measuring Signals With Relatively Large Noise. 20M Hardware Bandwidth Limit, Can Filter Out Noise Above 20Mhz. The Trigger Adopts Digital Trigger Technology With High Precision. It Has Three Trigger Modes: Automatic/Single/Normal. It Has A Strong Ability To Capture Periodic Signals.
It Only Takes 2 Seconds To Measure 1Vpp/1Khz. Save Waveforms And Screenshots With One Key, Up To 250 Sets Of Waveform Data Or 90 Pictures Can Be Stored, And 500 Intercepted Wave Data Can Be Stored At The Same Time. The Data Browser Can Browse And View The Currently Saved Waveform Data And Pictures, And The Waveform Data Supports Operations Such As Zooming And Moving. High Voltage Anti-Burning Protection, All Gears Can Withstand High Voltage Up To 400V. Usb Data Export.
The Frequency Of The Sine Wave Can Reach Up To 20Mhz, And The Other Waveforms Can Reach Up To 10Mhz. The Original Chopping Output Function Can Store Up To 500 Customized Signals. It Has Three Time Base Modes Of Yt, Xy And Rolling. Manual Cursor Measurement Is Suitable For Measurements With Large Noise Signals. Efficient One-Button Automaticadjustment, Adaptive 25%, 50%, 75% Electric Level.
The Waveform Display Effect Is Good, And The Color Ways Are Grayscale And Color Temperature. With A Waveform Refresh Rate Of Up To 50000Wfm/S, It Is Easier To Display Abnormal Signals With Low Probability. The Time Base System Includes A Zoom Time Base For Easy Analysis Of Digital Protocol Signals. With A Vertical Sensitivity As Low As 5Mv, It Can Better Measure Small Signals Of 5Mvpp..
Features
- DPOX180H is a cost-effective handheld dual-channel digital phosphor oscilloscope launched by FNIRSI with a two-in-one oscilloscope and signal generator. The oscilloscope has a real-time sampling rate of 500MSPS and an analog bandwidth of 180MHz.In terms of display, a high-contrast 2.8-inch IPS full-vision LCD screen and digital fluorescent technology are used.
- The waveform display effect is good, and the color ways are grayscale and color temperature. With a waveform refresh rate of up to 50000wfm/s, it is easier to display abnormal signals with low probability. The time base system includes a ZOOM time base for easy analysis of digital protocol signals. With a vertical sensitivity as low as 5mV, it can better measure small signals of 5mVPP.
- The original adjustable automatic bandwidth limit and adaptive adjustable trigger suppression are suitable for analyzing and measuring signals with relatively large noise. 20M hardware bandwidth limit, can filter out noise above 20MHz. The trigger adopts digital trigger technology with high precision. It has three trigger modes: automatic/single/normal. It has a strong ability to capture periodic signals
- The frequency of the sine wave can reach up to 20MHz, and the other waveforms can reach up to 10MHz. The original chopping output function can store up to 500 customized signals. It has three time base modes of YT, XY and rolling. Manual cursor measurement is suitable for measurements with large noise signals. Efficient one-button automaticadjustment, adaptive 25%, 50%, 75% electric level
- it only takes 2 seconds to measure 1VPP/1KHz. Save waveforms and screenshots with one key, up to 250 sets of waveform data or 90 pictures can be stored, and 500 intercepted wave data can be stored at the same time. The data browser can browse and view the currently saved waveform data and pictures, and the waveform data supports operations such as zooming and moving. High voltage anti-burning protection, all gears can withstand high voltage up to 400V. USB data export
- See more on Amazon...
Brand: QDTimes | Manufacturer: FNIRSI
Dimensions: 3.94 x 11.81 x 3.94 Inches | Weight: 1.10 pounds
Warranty: 1 Year warranty
See On Amazon #9
YuqiaoTime FNIRSI DSO-TC2 Handheld Oscilloscope Transistor Detector Digital Oscilloscope LCR Meter Resistance Meter Capacitance Meter (DSO-TC2)
Asin: B0CBC7NZ6N | Model: YQ-DSO-TC2 | PartNumber: YQ-DSO-TC2
"Mos Test" Mode Can Test Various Types Of Transistors, And Can Identify Device Type, Pin Polarity, Hfe, Turn-On Voltage, Junction Capacitance; Can Test Capacitance, Resistance, Inductance Components, Etc..
Fnirsi Dso-Tc3 Is An Upgraded Version Of Dso-Tc2. Based On Dso-Tc2, It Has Upgraded Capacitance Esr Detection, Function Signal Generator Output, Oscilloscope Bandwidth And Sampling Rate Improvement, Input Voltage, Diode Detection Range Increase, And So On. The Improvement In Performance And Function Of Dso-Tc3 Makes The Device More Stable And Accurate In The Detection Process..
Fnirsi-Tc2 Is Especially Suitable For The Fast Pairing Of Transistors, Identification Of Mixed Surface Mount And Wordless Components, And Preliminary Screening Of Small Batch Components. "Oscilloscope" Mode To Test The Signal Waveform Of The Circuit. Support Online Operation With A Computer, You Can Refresh The Official Firmware By Yourself And Complete The Upgrade..
Fnirsi-Tc2 Has Various Working Modes Such As Oscilloscope And Component Tester. Each Time You Click The Power Button, It Will Enter The Mode Selection Interface. Press The [Up] And [Down] Keys Of The Direction Keys To Select, Select The "Mos Test" Item, And Press【Ok】Key To Enter Component Tester Mode; Select The "Oscilloscope" Item, Press【Ok】Key To Enter The Oscilloscope Mode..
Features
- FNIRSI-TC2 ingeniously integrates a digital oscilloscope, electronic component tester, PWM signal generator, and other functions into one. Equipped with large-size colour dot matrix TFT display. Built-in rechargeable lithium battery. Bring more practical functions to users with a small size, Also has good portability.
- FNIRSI-TC2 has various working modes such as oscilloscope and component tester. Each time you click the power button, it will enter the mode selection interface. Press the [Up] and [Down] keys of the direction keys to select, select the Mos Test item, and press OK key to enter component tester mode; Select the Oscilloscope item, press OK key to enter the oscilloscope mode.
- Mos Test mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance; can test capacitance, resistance, inductance components, etc.
- FNIRSI-TC2 is especially suitable for the fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components. Oscilloscope mode to test the signal waveform of the circuit. Support online operation with a computer, you can refresh the official firmware by yourself and complete the upgrade.
- FNIRSI DSO-TC3 is an upgraded version of DSO-TC2. Based on DSO-TC2, it has upgraded capacitance ESR detection, function signal generator output, oscilloscope bandwidth and sampling rate improvement, input voltage, diode detection range increase, and so on. The improvement in performance and function of DSO-TC3 makes the device more stable and accurate in the detection process.
- See more on Amazon...
Brand: YuqiaoTime | Manufacturer: Shen Zhen Shi Fei Ni Rui Si Technology Co.,Ltd(FNIRSI)
Dimensions: 3.94 x 7.87 x 3.94 inches
See On Amazon #10
YuqiaoTime FNIRSI DSO-TC3 Digital Oscilloscope Transistor Tester Function Signal Generator 3 in 1 Multifunction Electronic Component Tester (DSO-TC3 With P6100)
Asin: B0CBC31B5H | Model: YQ-DSO-TC3+P6100 | PartNumber: YQ-DSO-TC3+P6100
Fnirsi Dso-Tc3 Digital Oscilloscope Transistor Tester Function Signal Generator 3 In 1 Multifunction.
Fnirsi Dso-Tc3 Is An Upgraded Version Of Dso-Tc2. Based On Dso-Tc2, It Has Upgraded Capacitance Esr Detection, Function Signal Generator Output, Oscilloscope Bandwidth And Sampling Rate Improvement, Input Voltage, Diode Detection Range Increase, And So On. The Improvement In Performance And Function Of Dso-Tc3 Makes The Device More Stable And Accurate In The Detection Process..
Features
- FNIRSI DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding, and other functions that are skillfully integrated. It is equipped with a 2.4-inch colour TFT display, and a built-in rechargeable lithium battery, bringing users stronger and more practical functions with good portability.
- FNIRSI DSO-TC3 is an upgraded version of DSO-TC2. Based on DSO-TC2, it has upgraded capacitance ESR detection, function signal generator output, oscilloscope bandwidth and sampling rate improvement, input voltage, diode detection range increase, and so on. The improvement in performance and function of DSO-TC3 makes the device more stable and accurate in the detection process.
- FNIRSI DSO-TC3 Digital Oscilloscope Transistor Tester Function Signal Generator 3 in 1 Multifunction
- See more on Amazon...
Brand: YuqiaoTime | Manufacturer: Shen Zhen Shi Fei Ni Rui Si Technology Co.,Ltd(FNIRSI)
Dimensions: 3.94 x 7.87 x 3.94 inches
See On Amazon
Looking For Something Else?
Search