Flywheel Locking Tool Replacement for Mercedes-Benz M112, M113, M272, M273, M276, OM629, OM642
Asin: B0CBKBFXLL | Model: TOKIT-32072-Y | PartNumber: TOKIT-32072-Y
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Please Check The Model Before You Purchase. If You Are Not Sure If This Kit Set Will Fit Or Not Before Ordering. Please Send Us Vin(Chassis Number)For Checking..
Buyer Might Pay For The Custom Fee And Taxes If Needed..
Reference Part Number: 112589034000.
Features
- Engine Camshaft Alignment Timing Locking Tool Kit Replacement for Mercedes-Benz M112 M113 M272 M273 M276 OM629 OM642
- Reference Part Number: 112589034000
- Please check the model before you purchase. If you are not sure if this kit set will fit or not before ordering. PLEASE SEND US VIN(Chassis number)for checking.
- Buyer might pay for the custom fee and taxes if needed.
- See more on Amazon...
Brand: Generic | Manufacturer: HJL
Warranty: 30 DAYS
See On Amazon Similar To Flywheel Locking Tool Replacement for
#1
Chelhead LS Flywheel Locking Tool Steel Black Oxide Flexplate Locking Holder Tool Compatible with Engine Chevy LS 1 2 3 LSX
Asin: B087JB34VK | Ean: 0738629006522 | UPC: 738629006522
Tig Welded Using 1/4" Cold Rolled Usa Steel, Proven Design For Strength And Reliability.
Ls Flywheel Locking Tool Are Designed To Work On Engines Mounted To An Engine Stand Or An Engine Already Installed In The Vehicle.
Packing: 1Pcs Engine Flywheel Locking Tool Comes With Two Proper Length Grade 8.8 Bolts.
Easy To Install - Ls Engine Tools Just Bolts In Place Of Your Starter And Locks Securely Into The Flywheel Teeth.
Works On All Gm 97 -2019 Rwd V8 Ls And Lt Baised Engines. Cars And Trucks. 4.8, 5.3, 5.7, 6.0, 6.2, 7.0 Liter( Will Not Fit Gen 3 Coyote 18 And Up Engines).
Features
- Chelhead LS flywheel locking tool Compatible with Chevy/GM, LS1, LS2, LS3, LS6, clears all RWD bellhousings-Manual and Automatic (do not work on FWD engines)
- Works on all GM 97 -2019 rwd V8 LS and LT baised engines. Cars and trucks. 4.8, 5.3, 5.7, 6.0, 6.2, 7.0 liter( Will not fit Gen 3 coyote 18 and up engines)
- TIG welded using 1/4 cold rolled USA Steel, proven design for strength and reliability
- Easy to install - ls engine tools just bolts in place of your starter and locks securely into the flywheel teeth
- ls flywheel locking tool are designed to work on engines mounted to an engine stand or an engine already installed in the vehicle
- Packing: 1PCS Engine Flywheel Locking Tool Comes with two proper length grade 8.8 bolts
- See more on Amazon...
Brand: Chelhead | Manufacturer: SAMLIGHT
See On Amazon #2
Orion Motor Tech EN 48383 Camshaft Retaining Tool EN 46105 Compatible with Cadillac Buick Chevrolet Vauxhall Saab Pontiac Equinox Holden Saturn Cam Alignment Holding Kit for V6 2.8L 3.0L 3.6L Engines
Asin: B083PZHXKF | Model: ETT-C003 | PartNumber: ETT-C003
Superior Durability---Our Steel Is Galvanized With A Zinc Coating For Improved Longevity And Corrosion Resistance..
Satisfaction Guaranteed---Orion Motor Tech Backs These Parts With Its Usual Strong Warranty And Friendly Customer Service, Ensuring That You'll Enjoy Their Use For Years To Come..
Fits 2.8L, 3.0L, And 3.6L V6 Engine Codes Lp1, Hfv6, A30xh, Z32se, Z28net, Z28nel, A28ner, B284e, And B284l Meaning That It Works With Gmc Acadia; Buick Lacrosse And Enclave; Cadillac Cts, Srx, And Sts; Pontiac G6; Saturn Aura, Outlook, And Vue; Pontiac Torrent; Chevy Malibu, Camaro, Equinox, And Traverse; Saab 9-3, 9-4X, And 9-5; And Some Holden, Vauxhall, And Opel Models..
Superior Strength---These Camshaft Alignment Tools Are Made From High-Quality 45# Structural Steel For Maximum Strength And Endurance..
Features
- SUPERIOR GRIP---This automotive tool set slots in perfectly to hold your camshaft firmly in position at top dead center just like OEM sets EN-46105 and EN-48383.
- SUPERIOR STRENGTH---These camshaft alignment tools are made from high-quality 45# structural steel for maximum strength and endurance.
- SUPERIOR DURABILITY---Our steel is galvanized with a zinc coating for improved longevity and corrosion resistance.
- Fits 2.8L, 3.0L, and 3.6L V6 engine codes LP1, HFV6, A30XH, Z32SE, Z28NET, Z28NEL, A28NER, B284E, and B284L meaning that it works with GMC Acadia; Buick Lacrosse and Enclave; Cadillac CTS, SRX, and STS; Pontiac G6; Saturn Aura, Outlook, and Vue; Pontiac Torrent; Chevy Malibu, Camaro, Equinox, and Traverse; Saab 9-3, 9-4X, and 9-5; and some Holden, Vauxhall, and Opel models.
- SATISFACTION GUARANTEED---Orion Motor Tech backs these parts with its usual strong warranty and friendly customer service, ensuring that you'll enjoy their use for years to come.
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Warranty: 1 Year
See On Amazon #3
Lisle 22100 Flywheel Locking Tool for 6.6L Duramax
Asin: B002MCVPOO | Model: 22100 | PartNumber: 22100 | Ean: 0083045221005, 0956260273404, 0641125374890, 7355117590856, 0753956448784, 1897162352493 | UPC: 753956448784, 956260273404, 083045221005, 641125374890
Use 36Mm 12-Point Socket With 3/4 Square Drive To Remove Harmonic Balancer Bolt And Retorque On Installation.
Package Dimension Is 4.5 Inches Width By 5 Inches Height By 2 Inches Depth.
Saves Time By Locking The Flywheel At The Transmission Instead Of Having To Remove The Starter For Water Pump Replacement.
Features
- Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions
- Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement
- Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation
- Package dimension is 4.5 inches width by 5 inches height by 2 inches depth
- See more on Amazon...
Brand: Lisle | Manufacturer: Lisle
Dimensions: 3.00 x 4.00 x 3.00 inches | Weight: 1.45 Pounds
Warranty: Lifetime
See On Amazon #4
DPTOOL Camshaft Retaining Aligning Timing Kit Compatible with GMC Opel Saab Cadillac Buick Chevrolet 2.8 2.9 3.0 3.2 3.5 3.6 3.7 4.2 Engine EN-48383 EN-46105 EN-46106 EN-46111 J-44221
Asin: B0CJBLDKRV | Model: GM036 | PartNumber: GM036
En-48383 Applicable Vehicle Include: Compatible With Buick Enclave 3.6, Engine Code: Ly7;Compatible With Cadillac Srx, Sts, Cts 3.6, Engine Code: Ly7, Llt; Compatible With Chevrolet Camaro 2.8, Engine Code: Ltt, Lfx; Compatible With Opel Insignia 2.8 V6 Turbo, Engine Code: Lau/A28ner; Compatible With Opel Antara 3.2 V6 (2007 Onwards), Engine Code: Z32se; Compatible With Saab 9-5 2.8 (2009-2013), Engine Code: Lau/A28ner.
Applicable Vehicle Include: For Chevrolet Colorado 3.5L Vin 5 5 Cylinder (2004-2006); For Gmc Canyon 3.5L Vin 5 5 Cylinder (2004-2006); For Gmc Canyon 2.9L (2007-2012); For Chevy Colorado 2.9L (2007-2012); For Gmc Canyon 3.7L (2007-2012); For Chevy Colorado 3.7L (2007-2012).
Combination Kit: This Kit Include: Camshaft Locking Tool En-48383, En-46105, J-44221, Flywheel Locking Tool En-46106, Crankshaft Rotation Tool En-46111.
J-44221 Applicable Vehicle Include: For Chevrolet Colorado 2.8L (2004-2006); For Gmc Canvon 2.8L (2004-2006); For 0Ldsmobile Bravada 4.2L Vin S (2002-2004); For Buick Rainier 4.2L Vin S (2004-2006); For Chevrolet Trailblazer 4.2L Vin S (2002-2008); For Gmc Envoy 4.2L Vin S (2002-2006).
Oem Equivalent Part Number: En-48383, En-46105, En-46106, En-46111, J-44221.
Features
- Applicable Engine: compatible with GMC Opel Saab Cadillac Buick Chevrolet Pontiac 2.8 2.9 3.0 3.2 3.5 3.6 3.7 4.2 engine, engine code: LY7, LLT, LTT, LFX, LAU/A28NER, Z32SE, LP1, HFV6, A30XH, Z32SE, Z28NET, Z28NEL, A28NER, B284E, B284L
- OEM Equivalent Part Number: EN-48383, EN-46105, EN-46106, EN-46111, J-44221
- EN-48383 Applicable Vehicle Include: compatible with Buick Enclave 3.6, engine code: LY7;compatible with Cadillac SRX, STS, CTS 3.6, engine code: LY7, LLT; compatible with Chevrolet Camaro 2.8, engine code: LTT, LFX; compatible with Opel Insignia 2.8 V6 Turbo, engine code: LAU/A28NER; compatible with Opel Antara 3.2 V6 (2007 onwards), engine code: Z32SE; compatible with Saab 9-5 2.8 (2009-2013), engine code: LAU/A28NER
- J-44221 Applicable Vehicle Include: for Chevrolet Colorado 2.8L (2004-2006); for GMC Canvon 2.8L (2004-2006); for 0ldsmobile Bravada 4.2L vin S (2002-2004); for Buick Rainier 4.2L vin S (2004-2006); for Chevrolet Trailblazer 4.2L vin S (2002-2008); for GMC Envoy 4.2L vin S (2002-2006)
- Applicable Vehicle Include: for Chevrolet Colorado 3.5L vin 5 5 cylinder (2004-2006); for GMC Canyon 3.5L vin 5 5 cylinder (2004-2006); for GMC Canyon 2.9L (2007-2012); for Chevy Colorado 2.9L (2007-2012); for GMC Canyon 3.7L (2007-2012); for Chevy Colorado 3.7L (2007-2012)
- Combination Kit: this kit include: camshaft locking tool EN-48383, EN-46105, J-44221, Flywheel locking tool EN-46106, Crankshaft rotation tool EN-46111
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
Warranty: 12 months warranty
See On Amazon #5
E-cowlboy Flywheel Locking Tool with 36mm 3/4 Socket for 6.6L Duramax
Asin: B085FXPQ73 | Model: 22100 | PartNumber: 22100 | Ean: 7427046758406
Duramax 4500 / 5500 Trucks -- Use Toothed Pieces With Screws Remove The Rubber Inspection Cap On The Bottom Of The Transmission. Insert The Tool At The Front Of The Opening To Engage The Flywheel And Hand Tighten Bolt To Hold Tool In Place..
100% Satisaction Guarantee: If You're Not 100% Satisfied With The Flywheel Locking Tool, Simply Return It For A Full Refund In 30 Days. Premium Support & 12-Month Warranty..
36Mm Socket -- Use 36Mm 12 Point Socket With 3/4" Square Drive To Remove Harmonic Balancer Bolt And Re-Torque On Installation. 36Mm 12 Point Socket Can Also Be Used On Axle..
Duramax 2500 / 3500 Pickups – Use Toothed Pieces Only Removes Metal Spring-Loaded Inspection Plate On The Bottom Of The Transmission. Tool Should Slide Into Opening Toward Engine With The Top Of The Tool Engaging The Teeth Of The Flywheel..
Features
- Benefits -- Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions. Saving time than removing the starter for water pump replacement.
- Duramax 2500 / 3500 Pickups Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel.
- Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
- 36mm Socket -- Use 36mm 12 point socket with 3/4 square drive to remove harmonic balancer bolt and re-torque on installation. 36mm 12 point socket can also be used on axle.
- 100% Satisaction Guarantee: If you're not 100% satisfied with the Flywheel Locking Tool, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon #6
8MILELAKE Flywheel Turner for Turning and Holding Flex Plates and flywheels
Asin: B089FJ2CHQ
Also Holds The Flywheel Or Flex Plate When Torqueing The Flywheel Or Harmonic Balancer Bolts.
Use When Working On Clutches, Transmissions; Installing Rings Or Other Jobs That Require The Crankshaft To Be In A Specific Position.
Hold Or Turn Flywheels And Flex Plates On Most Vehicles..
Folds For Easy Storage.
Features
- Use this special wrench to turn the flywheel and rotate the engine
- Folds for easy storage
- Also holds the flywheel or flex plate when torqueing the flywheel or harmonic balancer bolts
- Hold or Turn Flywheels and Flex plates on Most Vehicles.
- Use when working on clutches, transmissions; installing rings or other jobs that require the crankshaft to be in a specific position
- See more on Amazon...
Brand: 8MILELAKE | Manufacturer: freebirdtrading
Dimensions: 3.15 x 3.94 x 3.94 inches
See On Amazon #7
DarSeity LS Engine Flywheel Locking Tool, Flexplate Holding Tool Compatible with Chevy LS 1 2 3 LSX
Asin: B09YCLC8LB | Model: LS Flywheel holder | PartNumber: LS Flywheel holder
Simply Bolt The Starter Into Place And Lock It Securely To The Flywheel Teeth..
Tools That Must Be Had For Cam Or Balancer Replacement..
Welded Using 1/4" Us Cold Rolled Steel With Black Coating, For Strength And Reliability..
Designed To Work On Engines Already Installed In Vehicles. Works On All Gm 97 -2019 Rwd V8 Ls And Lt Baised Engines. Cars & Trucks. 4.8, 5.3, 5.7, 6.0, 6.2, 7.0 Liter ( Not Fit Gen 3 Coyote 18 And Up Engines)..
Features
- Compatible with Chevy/GM LS1, LS2, LS3, LS6 LSX Engine, to be used on engine mounts or in vehicles. NOTE:Not suitable for all-wheel drive engines.
- Designed to work on engines already installed in vehicles. Works on all GM 97 -2019 rwd V8 LS and LT baised engines. Cars & Trucks. 4.8, 5.3, 5.7, 6.0, 6.2, 7.0 liter ( NOT fit Gen 3 coyote 18 and up engines).
- Simply bolt the starter into place and lock it securely to the flywheel teeth.
- Welded using 1/4 US cold rolled steel with black coating, for strength and reliability.
- Tools that must be had for cam or balancer replacement.
- See more on Amazon...
Brand: DarSeity | Manufacturer: DarSeity
Dimensions: 1.97 x 5.91 x 3.94 inches | Weight: 0.51 pounds
Warranty: 1 year
See On Amazon #8
Ignition Stator Magneto 8 Coil 5 Wires Replacement for GY6 50CC 60CC 80CC ATV Scooter TAOTAO Paliden 150cc scooter
Asin: B0150VZ2U6 | Model: GY6-50-37 | PartNumber: GY6-50-37 | Ean: 0712265979020 | UPC: 712265979020
Replace Existing Damaged Coil,Plug-And-Play,Direct Fit,Easy Installation Highest Grade Lamination Material And Copper Winding To Offer Long Lasting Durability.
8 Coil Ac Stator For 50Cc-150Cc Gy6 4-Stroke Engine Scooters And Mopeds, Such As Taotao, Buyang, Coolsport, Kazuma, Sunl, Jcl, Nst,Etc.
Designed To Produce Optimum Output Electricity.
Features
- Aftermarket 8-coil AC magneto stator
- Designed to produce optimum output electricity
- Replace existing damaged coil,plug-and-play,direct fit,easy installation Highest grade lamination material and copper winding to offer long lasting durability
- 8 Coil AC Stator for 50cc-150cc GY6 4-stroke engine scooters and mopeds, such as TaoTao, Buyang, Coolsport, Kazuma, Sunl, JCL, NST,etc
- See more on Amazon...
Brand: WEIYINGSI | Manufacturer: Wingsmoto
See On Amazon #9
Orion Motor Tech Flywheel Puller, 10pc Universal Flywheel Puller Set for Motorcycles Scooters ATVs, Metric Flywheel Removal Tools, Small Engine Flywheel Puller Compatible with Yamaha Kawasaki Ducati
Asin: B0BD3853FG | Model: F001 | PartNumber: F001
Wide Compatibility: These Versatile Engine Flywheel Tools Are For Street, Performance, And Off-Road Small Engines On Scooters, Motorcycles, Atvs, And Dirt Bikes, Compatible With Honda, Suzuki, Kawasaki, Yamaha, Ducati, Arctic Cat, Vespa, Bosch, And Most Late-Model Mx Bikes.
Satisfaction Guaranteed: Order This Small Engine Flywheel Puller Tool With Your Peace Of Mind Assured Thanks To Omt’S Good Name, 1 Year Strong Warranty, And Friendly 24/7 Customer Service.
Quality Build: Our Heavy-Duty Flywheel Removal Tools Are Made From Premium Carbon Steel With Zinc Plating To Provide Exceptional Wear And Corrosion Resistance For Resilient Service.
Complete Remover Kit: This Universal Flywheel Puller Includes 5 Single Ended And 5 Double Ended Pullers To Meet All Your Needs; Each Puller Is Laser Etched With Clear Metric Sizes For Your Convenient Identification.
Features
- EFFORTLESS FLYWHEEL REMOVAL: Orion Motor Tech's ATV and motorcycle flywheel puller set allows you to quickly and easily separate the flywheel from the crankshaft taper or even pull clutch packs, ideal for scooter and ATV repairs
- COMPLETE REMOVER KIT: This universal flywheel puller includes 5 single ended and 5 double ended pullers to meet all your needs; each puller is laser etched with clear metric sizes for your convenient identification
- WIDE COMPATIBILITY: These versatile engine flywheel tools are for street, performance, and off-road small engines on scooters, motorcycles, ATVs, and dirt bikes, compatible with Honda, Suzuki, Kawasaki, Yamaha, Ducati, Arctic Cat, Vespa, Bosch, and most late-model MX bikes
- QUALITY BUILD: Our heavy-duty flywheel removal tools are made from premium carbon steel with zinc plating to provide exceptional wear and corrosion resistance for resilient service
- SATISFACTION GUARANTEED: Order this small engine flywheel puller tool with your peace of mind assured thanks to OMT s good name, 1 year strong warranty, and friendly 24/7 customer service
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 2.00 x 12.00 x 9.00 inches
Warranty: 1 Year Warranty
See On Amazon #10
EUICAE Spanner Wrench Clutch Wrench Adjustable Wrench Holder Hub Flywheel Sprocket Spanner Wrench Set Fan Clutch Removal Tool Tools Scooter Motorcycle Accessories (Type A+B)
Asin: B08CK3KCJY | Model: A0010 | PartNumber: A0010
※Wide Applications: Spanner Wrench: Adjustable Screw And Two Sizes Of Pin On Either Side Make This Spanner Wrench Suitable For Different Distances Between Slots And Different Sizes Of Slots. Magneto Flywheel Puller: One With 2 Sizes: 24Mm& 27Mm..
※Quality And Satisfaction Guarantee: Every Piece Of Product Has Been Carefully Checked Before Packaging. If You Are Not Satisfied With Your Purchase For Any Reason, Euicae Is Pleased To Refund You. We Stand Confidently Behind Our Products With Our Satisfaction Guarantee!.
※ Package Includes: 1 Spanner Wrench & 1 Magneto Flywheel Puller..
※Material & Manufacturing: Our Spanner Wrench And Magneto Flywheel Puller Are Made Of High Quality And Denser Magnetic Steel, Not Easy To Bend. With Good Manufacturing, Fine Workmanship And Reliable Quality, It Is Sturdy, Durable And Strong..
Features
- Dimension: Spanner Size: Arms Opening Width: 0.75in-4.3in (1.9cm-11cm); The large end of pin: 0.35in/9mm; small end of pin: 0.28in/ 7mm. Puller Size: 24mm& 27mm. 24mm right hand thread for GY6 50cc 4 Stroke Scooter Moped ATV; 27mm left hand thread for GY6 125 150cc Scooter 125cc Motorcycles
- Material & Manufacturing: Our spanner wrench and magneto flywheel puller are made of high quality and denser magnetic steel, not easy to bend. With good manufacturing, fine workmanship and reliable quality, it is sturdy, durable and strong.
- Wide Applications: Spanner Wrench: Adjustable Screw and two sizes of pin on either side make this spanner wrench suitable for different distances between slots and different sizes of slots. Magneto Flywheel Puller: One with 2 sizes: 24mm& 27mm.
- Package includes: 1 Spanner Wrench & 1 Magneto Flywheel Puller.
- Quality and Satisfaction Guarantee: Every piece of product has been carefully checked before packaging. If you are not satisfied with your purchase for any reason, EUICAE is pleased to refund you. We stand confidently behind our products with our satisfaction guarantee!
- See more on Amazon...
Brand: EUICAE | Manufacturer: EUICAE
Weight: 1.54 Pounds
See On Amazon
Looking For Something Else?
Search