Capacitor Active Equalizer Battery Active Equalizer BMS Balancer Active Balance Equalization Module for LTO LFP LPO NCM (3-4S)
Asin: B0CBQ9TS6S | Model: FTVOGUEfw78mhg6qe-11 | PartNumber: FTVOGUEfw78mhg6qe-11
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Wider Utility: Allows For Broad Application On Various Cells, Such As Li2tio3, Li Ion Lithium, For Lifepo4, Ncm And So On..
Better Designs: Has Reserved Position For Sleep Switch Wiring, The Working Current Of Sleep Mode Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv..
Practical Uses: The Quiescent Current Is About 12Mah, And The Recommended Battery Capacity Is 60‑300Ah For Batteries..
Secure Working: Adopting Low Internal Resistance Mos And 2Oz Copper Thick Pcb, The Balance Current Is 0‑5.5A, The More Balance The Battery, The Smaller The Balance Current..
Features
- Easy Operation: Fly transfer carrier with high capacitive degree, just connect to the battery and start equalization.
- Secure Working: Adopting low internal resistance MOS and 2OZ copper thick PCB, the balance current is 0 5.5A, the more balance the battery, the smaller the balance current.
- Wider Utility: Allows for broad application on various cells, such as Li2TiO3, li ion lithium, for LiFePo4, NCM and so on.
- Practical Uses: The quiescent current is about 12mAh, and the recommended battery capacity is 60 300AH for batteries.
- Better Designs: Has reserved position for sleep switch wiring, the working current of sleep mode is less than 0.1mA, and the balance voltage accuracy is within 5mv.
- See more on Amazon...
Brand: FTVOGUE | Manufacturer: FTVOGUE
See On Amazon Similar To Capacitor Active Equalizer Battery Active
#1
Smart Active Equalizer Balancer, Battery Equalizer Balancer with Wide Application, Super Capacitor Voltage Detection Function for Lithium Iron Batteries (US Plug)
Asin: B0CZ9QT4PD | Model: Yunseitybt428oskgr-11 | PartNumber: Yunseitybt428oskgr-11
Suitable For 2 To 24 String Battery Packs: The Equalizer Is Suitable For 2 To 24 String Battery Packs With Voltage Acquisition And Equalization Functions. The Equalizer Works With A Continuous 15A Equalization Current To Transfer Energy Without Depending On The Voltage Difference Of Series Cells In The Battery Pack. The Voltage Acquisition Range Is 1. 5V To 4. 5V, And The Accuracy Is 1Mv. It Is Suitable For The Mainstream Ternary Lithium Battery, Lithium Iron Battery And Lithium Titana.
Super Capacitor: This Equalizer Uses Super Capacitor As The Medium, Which Allows Active Energy Transfer Equalization..
Communication Function: This Equalizer Has Communication Function And Comes With Mobile App Software. You Can Connect The Equalizer Via To Check The Single Battery Voltage, Check The Equalization Status, Modify The Setting Parameters And Other Operations..
Wide Application: This Equalizer Can Be Applied To The Battery Pack Of Small Sightseeing Cars, Commuting Cars, Shared Cars, High Power Energy Storage, Base Station Backup Power, Solar Power Stations, Etc. It Can Also Be Used For Battery Equalization Maintenance, Repair, Etc..
Features
- Balance Management System: Intelligent Active Balancer is a balance management system tailored for high capacity series battery packs.
- Wide Application: This equalizer can be applied to the battery pack of small sightseeing cars, commuting cars, shared cars, high power energy storage, base station backup power, solar power stations, etc. It can also be used for battery equalization maintenance, repair, etc.
- Suitable For 2 To 24 String Battery Packs: The equalizer is suitable for 2 to 24 string battery packs with voltage acquisition and equalization functions. The equalizer works with a continuous 15A equalization current to transfer energy without depending on the voltage difference of series cells in the battery pack. The voltage acquisition range is 1. 5V to 4. 5V, and the accuracy is 1mV. It is suitable for the mainstream ternary lithium battery, lithium iron battery and lithium titana
- Communication Function: This equalizer has communication function and comes with mobile APP software. You can connect the equalizer via to check the single battery voltage, check the equalization status, modify the setting parameters and other operations.
- Super Capacitor: This equalizer uses super capacitor as the medium, which allows active energy transfer equalization.
- See more on Amazon...
Brand: Yunseity | Manufacturer: Yunseity
See On Amazon #2
3S 4S 5A Active Equalizer Whole Group Balancer Lifepo4 Lipo Lto Lithium Active Battery Energy Transfer Equalization Capacitor + Protective Case
Asin: B09QKWH6RL | Model: 3S 4S | PartNumber: 3S 4S | Ean: 0602262884062 | UPC: 602262884062
[Protection Switch]: With Sleep Protection, When The Voltage Is Lower Than 3V, It Will Automatically Stop And Enter The Sleep State To Reduce The Damage To The Battery.With A Protective Case, It Can Better Protect 3S 4S 5A Active Equalizer And Extend Product Life..
[Satisfactory Service]:Protective Case Needs To Be Assembled By Yourself, We Provide 24-Hour Online Service,If You Encounter Any Problems, Please Email Seller Support (Not Amazon Support), We Will Give You A Perfect Solution..
[Original Design]:Using The Original Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Equalizing Current 0-5.5A, The More Balanced The Battery, The Lower The Current.Voltage Is 1.8 V-4.5V ,Suggest Battery Capacity: 60-300Ah..
[Capacitance Principle]: No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Charge Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack.The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
Features
- [Product Information]: Protective Case needs to be assembled by yourself,After the assembly is completed, tear off the outer yellow film.Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout.Model:3S-4S Suitable : Lithium Iron Phosphate, NCM Ternary Polymer,(Not Fit Lithium Titanate).
- [Capacitance Principle]: No external power supply is required,The working principle is Capacitor fit transfers the charge transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.
- [Protection switch]: With sleep protection, when the voltage is lower than 3V, it will automatically stop and enter the sleep state to reduce the damage to the battery.With a protective case, it can better protect 3S 4S 5A Active Equalizer and Extend product life.
- [Original Design]:using the original ultra-low internal resistance MOS, 2OZ copper thickness PCB, equalizing current 0-5.5A, The more balanced the battery, the lower the current.Voltage is 1.8 V-4.5V ,Suggest Battery Capacity: 60-300AH.
- [Satisfactory service]:Protective Case needs to be assembled by yourself, We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
- See more on Amazon...
Brand: Cywhrvzsf | Manufacturer: Cywhrvzsf
See On Amazon #3
3S 4S 12V 5A Battery Active Equalizer BMS Balancer Lipo Li-ion LFP LiFePO4 Lithium Battery Balance Active Energy Transfer Equalization Module Faster Whole Group Capacitor Balancer PCB
Asin: B096NLHXPF | Model: JW-CAP-Balancer-4S | PartNumber: JW-CAP-Balancer-4S | Ean: 0723258876141 | UPC: 723258876141
The Quiescent Current Is About 9Ma, And The Battery Capacity Is Recommended To Be Used Between 30-200Ah/Per Balancer. High-Capacity Batteries Can Be Connected In Parallel With Multiple Equalizers..
【Note】: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board. Tips: This Balancer Board Is Backward Compatible By Default. Eg. If It Is Used For 3S, The Last Line B4+ Is Empty..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb. Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
Features
- Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. NOTE Tips Well tested by the manufacturer. As long as the wiring is correct, the product guarantees long-lasting and effective performance. Of course, if customers have any questions, they can take the initiative to contact us, we are absolutely capable of providing more professional answers, rather than a direct refund returns.
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB. Balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 9mA, and the battery capacity is recommended to be used between 30-200AH/Per Balancer. High-capacity batteries can be connected in parallel with multiple equalizers.
- With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
- NOTE : Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board. Tips: This balancer board is backward compatible by default. eg. If it is used for 3S, the last line B4+ is empty.
- See more on Amazon...
Brand: QINIZX | Manufacturer: QINIZX
Dimensions: 0.63 x 2.61 x 1.80 Inches
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #4
5A 3S 4S 12V Battery Active Equalizer Whole Group Balancer LiFePO4 LFP Lipo Li-ion Lithium Active Battery Energy Transfer Equalization Capacitor Balancer PCB Module with Acrylic Protective Case
Asin: B0BBRNF823 | Model: JWCABalancer-4S | PartNumber: JWCABalancer-4S | Ean: 0789513999000 | UPC: 789513999000
The Quiescent Current Is About 12Ma, And The Battery Capacity Is Recommended To Be Used Between 30-300Ah!.
Note: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
Features
- Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. If it is used for 3S, the last line B4+ is empty. (Note: The default protective case is a kit, not assembled, the transparent acrylic case has a yellow protective film that can be peeled off. )
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 12mA, and the battery capacity is recommended to be used between 30-300AH!
- With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
- Note: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board.
- See more on Amazon...
Brand: XFYBZN | Manufacturer: XFYBZN
Dimensions: 0.63 x 2.60 x 1.80 Inches | Weight: 0.22 pounds
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #5
100Balance Hardware1A Active Balancer 4S Equalizer for Lifepo4 or Li-ion Lithium Battery Group BMS Energy Transfer Board with Blue ABS Case(4S)
Asin: B0CHMTY1T9 | Ean: 0725414469631 | UPC: 725414469631
Equalized Energy Dissipation Without Internal Resistance And Low Heat Generation For Long Time Connection To The Battery Pack..
We Provide 1 Year Product Warranty And 24/7 Online Service For Your Inquiry, Please Feel Free To Contact Us..
It Can Be Used In The Field Of Power Batteries (Electric Vehicles, Forklifts, Agvs, Cleaning Vehicles, Etc.), And Can Also Be Used In The Field Of Energy Storage (Outdoor Power Supply, Rv, Home Energy Storage, Base Station, Photovoltaic, Etc.).
Suitable For 3-16S Li-Ion Battery Pack And Lifepo4 Battery Pack. Please Note The Battery Strings Must Be Matched To The Active Balancer Strings..
Features
- This is an active equalization module for lithium batteries, which can be compatible with all other brands of BMS.
- Suitable for 3-16S Li-ion battery pack and LiFepo4 battery pack. Please note the battery strings must be matched to the active balancer strings.
- Equalized energy dissipation without internal resistance and low heat generation for long time connection to the battery pack.
- It can be used in the field of power batteries (electric vehicles, forklifts, AGVs, cleaning vehicles, etc.), and can also be used in the field of energy storage (outdoor power supply, RV, home energy storage, base station, photovoltaic, etc.)
- We provide 1 year product warranty and 24/7 online service for your inquiry, please feel free to contact us.
- See more on Amazon...
Brand: 100 BALANCE | Manufacturer: Dongguan Balanced Management Technology Co., Ltd
Dimensions: 0.71 x 2.36 x 1.38 Inches
See On Amazon #6
4A Active Equalizer 1mv Precision 8S 10S 14S 16S 20S 22S 24S 24V 48V Li-on Lifepo4 LTO Lithium Battery Capacitor Balancer with Docking Adapter
Asin: B0BNDXLBCN
[Protection Switch]:The Minimum Total Voltage Of The Battery Pack Is Greater Than 30V, The Undervoltage Hibernation Voltage Is 1.5-4.2V, The Static Working Current Is The Balance Of 10Ma, The Balance Of 25M, The Working Environment Temperature Is -20 Degrees To +55 Degrees, There Is No Need For External Power Supply, The Whole Battery Is Balanced By Internal Energy Transfer. Equalizing Capacitor Can Also Be Used In 3S 4S 5S 6S, But Requires The Addition Of An Additional Booster Power Supply..
[Satisfactory Service]: We Provide 24-Hour Online Service,If You Encounter Any Problems, Please Email Seller Support (Not Amazon Support), We Will Give You A Perfect Solution..
[3 Indicator Light]:Blue Bluetooth Status Indicator Steady On: The Bluetooth Connection Is Successful. Blinking: The Bluetooth Link Is Down. Red Fault Status Indicator Steady On, It Indicates An Internal Fault. The Battery Flicker Test Failed. Procedure Green The Working Status Indicator Is Steady On, Indicating That The Balance Is Complete. Flash And Balance Are Working..
[Capacitance Principle]：Cywhrvzsf Capacitive Energy Transfer Balance Board, Capacitor High Precision 1Mv, Point-To-Point Energy Transfer Balance, Patent Balanced Structure Flying Capacitor Method, Combining Point-To-Point Energy Transfer Algorithm To Achieve Efficient Balance, Maximum Balance Current 4A,App Custom Settings :1-4A, Due To The Use Of Constant Current Constant Voltage Technology, Balance Current And Battery Voltage Difference Has Nothing To Do..
Features
- [Product Information]: Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout. With Bluetooth mobile phone English APP function, you can contact us about app use and usage instructions.Model:8S-24S ,Suitable : Lithium Iron Phosphate,Lithium Titanate,NCM Ternary Polymer (NCM/LFP/LTO),Voltage is 1.0 V-4.5V.
- [Capacitance Principle] Cywhrvzsf capacitive energy transfer balance board, capacitor high precision 1mv, point-to-point energy transfer balance, patent balanced structure flying capacitor method, combining point-to-point energy transfer algorithm to achieve efficient balance, maximum balance current 4A,APP custom Settings :1-4A, due to the use of constant current constant voltage technology, balance current and battery voltage difference has nothing to do.
- [Protection Switch]:The minimum total voltage of the battery pack is greater than 30V, the undervoltage hibernation voltage is 1.5-4.2V, the static working current is the balance of 10mA, the balance of 25m, the working environment temperature is -20 degrees to +55 degrees, there is no need for external power supply, the whole battery is balanced by internal energy transfer. equalizing capacitor can also be used in 3S 4S 5S 6S, but requires the addition of an additional booster power supply.
- [3 Indicator Light]:Blue Bluetooth status indicator Steady on: The Bluetooth connection is successful. Blinking: the Bluetooth link is down. Red Fault status indicator Steady on, it indicates an internal fault. The battery flicker test failed. Procedure Green The working status indicator is steady on, indicating that the balance is complete. Flash and balance are working.
- [Satisfactory Service]: We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
- See more on Amazon...
Brand: Cywhrvzsf | Manufacturer: Equalizer
Dimensions: 1.00 x 3.00 x 4.00 inches
See On Amazon #7
3S 4S 5.5A Capacitor Active Equalizer Balancer Lifepo4 Lithium Lipo Battery Energy Transfer Active Equalization Whole Group Balancer
Asin: B09MS8Z58H | Model: JWCABalancer-4S | PartNumber: JWCABalancer-4S | Ean: 0721927465870 | UPC: 721927465870
The Quiescent Current Is About 12Ma, And The Battery Capacity Is Recommended To Be Used Between 30-300Ah!.
Note: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
Features
- Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. If it is used for 3S, the last line B4+ is empty.
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 12mA, and the battery capacity is recommended to be used between 30-300AH!
- With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
- Note: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board.
- See more on Amazon...
Brand: XFYBZN | Manufacturer: XFYBZN
Dimensions: 1.33 x 3.63 x 3.05 Inches | Weight: 0.13 pounds
Warranty: 60-day warranty
See On Amazon #8
Hilitand Battery Active Equalizer, Balancer Energy Transfer Board Accessory Lithium Lipo Battery Energy Active Equalizer Fit Capacitor Silicone Cable for NCM LFP LTO(4S)
Asin: B09F3VH3QK
Practical Tool: No External Power Supply Is Required, And The Transfer Is Carried Out By Means Of The Internal Energy Transfer Of The Battery And The Balance Of The Entire Battery Pack..
Note: The Quiescent Current Is About 12 Ma, And It Is Recommended To Be Used For Batteries With A Battery Capacity Of 60‑300 Ah, Which Has Passed Strict Quality Control, You Can Use It With Confidence..
Great Performance: Using Ultra Low Internal Resistance Mos And Premium Printed Circuit Board, Ensuring Excellent Balance Effect. The Balance Accuracy Is 5Mv, The Sleep Current Is Less Than 0.1Ma, And The Efficiency Is Very High..
Product Brief: The Working Voltage Is 1.8V To 4.2V, And When It's Lower Than 3.0V, It Will Automatically Stop And Enter Dormant State. Suitable For Ncm Battery, Lfp Battery, Lto Battery..
Features
- Premium Quality: This battery active equalizer suite for ternary lithium battery, lithium iron battery, and LTO battery. The working environment temperature of this battery active equalizer is from -10 to 60 .
- Product Brief: The working voltage is 1.8V to 4.2V, and when it's lower than 3.0V, it will automatically stop and enter dormant state. Suitable for NCM battery, LFP battery, LTO battery.
- Practical Tool: No external power supply is required, and the transfer is carried out by means of the internal energy transfer of the battery and the balance of the entire battery pack.
- Great Performance: Using ultra low internal resistance MOS and premium Printed Circuit Board, ensuring excellent balance effect. The balance accuracy is 5MV, the sleep current is less than 0.1mA, and the efficiency is very high.
- Note: The quiescent current is about 12 mA, and it is recommended to be used for batteries with a battery capacity of 60 300 AH, which has passed strict quality control, you can use it with confidence.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon #9
8S 5A 6S 7S Active Equalizer Balancer Lipo Lifepo4 Lto Lithium Active Battery Energy Transfer Equalization Capacitor
Asin: B0BWMVTB24
[Capacitance Principle]: 8S 5A 6S 7S Active Equalizer Balancer Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack..
[Satisfactory Service]: We Provide 24-Hour Online Service,If You Encounter Any Problems, Please Email Seller Support (Not Amazon Support), We Will Give You A Perfect Solution..
[Original Design]:8S 5A Active Equalizer Using The Original Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb..
[Protection Switch]: 8S 5A Balancer Equalizer With Sleep Protection, When The Voltage Is Lower Than 3V, It Will Automatically Stop And Enter The Sleep State To Reduce The Damage To The Battery..
Features
- [Product Information]:Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout. Product Name:6S-8S ,Suitable : Lithium Iron Phosphate,Lithium Titanate,NCM Ternary Polymer,Suggest Battery Capacity: 60-300AH, Voltage: 1.8 V-4.5V. Wire: 18AWG wire, 9P, 40cm.
- [Protection switch]: 8S 5A Balancer Equalizer With sleep protection, when the voltage is lower than 3V, it will automatically stop and enter the sleep state to reduce the damage to the battery.
- [Capacitance Principle]: 8S 5A 6S 7S Active Equalizer Balancer use the internal energy transfer of the battery to transfer and balance the entire battery pack.
- [Original Design]:8S 5A Active Equalizer using the original ultra-low internal resistance MOS, 2OZ copper thickness PCB.
- [Satisfactory Service]: We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
- See more on Amazon...
Brand: Cywhrvzsf | Manufacturer: Cywhrvzsf
Warranty: 1 years
See On Amazon #10
Active Equalizer Whole Group Balancer Lifepo4 Lipo Lithium Active Battery Energy Transfer Active Equalization Module for NCM LFP LTO (8S)
Asin: B0BS1G7KXF | Model: Hilitand26y4conpav-13 | PartNumber: Hilitand26y4conpav-13
【Notice】 Before Connecting The Equalization Board, Check Whether Each Piece Of Wiring Is Correct, Insulation Between The Bottom Board And The Battery Connection Terminals Is Required To Prevent Burnout..
【Capacitance Principle】 No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack.The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
【With Sleep Protection】 The Working Voltage Is 1.8V To 4.2V. When The Voltage Is Lower Than 3.0V, It Will Automatically Stop And Enter The Dormant State, And The Standby Power Consumption Is Less Than 0.1Ma..
【Original Design】 Using The Original Ultra-Low Internal Resistance Mos, Equalizing Current 0-5.5A, The More Balanced The Battery, The Lower The Current..
Features
- For NCM LFP LTO Adopting ultra low internal resistance MOS and premium Printed Circuit Board to ensure efficient balance effect. This active equalizer can be applied in ternary lithium battery, lithium iron battery, and LTO battery. Applicable Serial Number 5/6s 6/7s 7/8s.
- Original Design Using the original ultra-low internal resistance MOS, equalizing current 0-5.5A, the more balanced the battery, the lower the current.
- Notice Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout.
- With Sleep Protection The working voltage is 1.8V to 4.2V. When the voltage is lower than 3.0V, it will automatically stop and enter the dormant state, and the standby power consumption is less than 0.1mA.
- Capacitance Principle No external power supply is required,The working principle is Capacitor fit transfers the transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 0.50 x 1.18 x 1.57 Inches
See On Amazon #11
10S 32V 36V 42V 1.2A Li-ion Lipo Lifepo4 LFP Battery Active Equalizer BMS Balancer Inductive Balance Lithium Battery Energy Transfer Board (10S)
Asin: B09C3HLL7W | Model: InduBalce-10S | PartNumber: InduBalce-10S | Ean: 0048518727415 | UPC: 048518727415
Applicable Battery Type: Ncm(Li-Ion)/Lfp, Not Support Lto; Single Voltage Working Range: 3.0V-4.2V; Suggested Battery Capacity: Below 30Ah, If More Than 30Ah, Pls Search Capacitor Faster Whole Group Balancer " B096nlhxpf " To Purchase. This Pcb Size About: 4.6X2.24X0.31Inch..
Voltage Balance Accuracy: 30Mv (Typical Value) Between Adjacent Voltages; Balance Current: 0.1V Voltage Difference 0.5A Balance Current, The Maximum Balance Current Is 1.2A When The Voltage Difference Is Above 0.2V. Static Working Current: 0.01Ma; Under-Voltage Protection Dormant Voltage: The Adjacent Voltage Difference Is Less Than 0.03V And Enters Dormant State..
Balance Method: Detect That The Voltage Difference Between Adjacent Batteries Is Greater Than 0.1V To Trigger The Start Of Equalization, And The Adjacent Battery Voltage Difference Is Less Than 0.03V To Stop Working. (Tips: The Inductance Equalization Board Needs To Be Charged/Discharged Many Times Before The Voltage Equalization Can Achieve A Better Effect.).
【Tips】: The Equalization Board Is Not A Bms Protection Board, It Is An Auxiliary To The Protection Board, So No Matter How Bad The Battery You Use To Test, It Can Be Used, But It Has No Overvoltage/Overdischarge Protection Function. Overvoltage/Overdischarge Is The Function Of The Bms Protection Board. If Voltage Protection Is Required, It Is Best To Use It In Parallel With The Bms Protection Board..
Features
- NOTE : Not recommended to be compatible with low strings, The indicator light will flash and report an error. Before connecting the equalization board, be sure to check whether each battery is wired correctly, and do a good job of insulation. otherwise it will short-circuit and burn the board. Note that first contact the B- pin (The order must be: B-, B1,... B10) and insert it diagonally upwards, otherwise it may cause the board to burn out.
- Tips : The equalization board is not a BMS protection board, it is an auxiliary to the protection board, so no matter how bad the battery you use to test, it can be used, But it has no overvoltage/overdischarge protection function. Overvoltage/overdischarge is the function of the BMS protection board. If voltage protection is required, it is best to use it in parallel with the BMS protection board.
- Applicable battery type: NCM(Li-ion)/LFP, NOT support LTO; Single voltage working range: 3.0V-4.2V; Suggested battery capacity: below 30AH, If more than 30AH, pls search Capacitor Faster Whole Group Balancer B096NLHXPF to purchase. This PCB size about: 4.6x2.24x0.31inch.
- Balance method: Detect that the voltage difference between adjacent batteries is greater than 0.1V to trigger the start of equalization, and the adjacent battery voltage difference is less than 0.03V to stop working. (Tips: The inductance equalization board needs to be charged/discharged many times before the voltage equalization can achieve a better effect.)
- Voltage balance accuracy: 30mV (typical value) between adjacent voltages; Balance current: 0.1V voltage difference 0.5A balance current, the maximum balance current is 1.2A when the voltage difference is above 0.2V. Static working current: 0.01mA; Under-voltage protection dormant voltage: The adjacent voltage difference is less than 0.03V and enters dormant state.
- See more on Amazon...
Brand: QINIZX | Manufacturer: QINIZX-JW
Dimensions: 0.31 x 4.60 x 2.24 inches | Weight: 0.14 pounds
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #12
Active Equalizer Balancer, Lithium Battery Cell Energy Transfer Board 4 Series 6A Equalization Board
Asin: B0BR8DBYBM | Model: Hilitandih6vn7y2zt | PartNumber: Hilitandih6vn7y2zt
【High Accurate】 The Price Is Lower Than Similar Capacitor Products, Which Keeps Each Battery Balanced And Prolongs The Service Life Of The Battery..
【Capacitance Principle】 No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack.The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
【Applicability】With Simple Indicating Switch, It Is Suitable For People With Weak Base To Operate. All Ternary Lithium Batteries And Iron Lithium Batteries Are Universal..
【Active Capacitance Balance】 Using A Specially Customized Control Chip, Does Not Detect The Pressure Difference/Designed To Work For A Long Time Without Shutting Down..
Features
- Current The quiescent current is as low as 5mA, which can achieve a high accurate equalization of 5mV, and the equalization current is 2~6A (this refers to the limit current that the circuit board can withstand. In the case of small voltage difference or large internal resistance of the battery, the current is not so Big).
- Active Capacitance Balance Using a specially customized control chip, does not detect the pressure difference/designed to work for a long time without shutting down.
- High Accurate The price is lower than similar capacitor products, which keeps each battery balanced and prolongs the service life of the battery.
- Applicability With simple indicating switch, it is suitable for people with weak base to operate. All ternary lithium batteries and iron lithium batteries are universal.
- Capacitance Principle No external power supply is required,The working principle is Capacitor fit transfers the transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon #13
4S 5A 3S Active Equalizer Lifepo4 Lipo Lto Lithium Whole Group Balancer Active Battery Energy Transfer Equalization Capacitor
Asin: B0CCMSN14K
[Original Design]:Using The Original Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Equalizing Current 0-5.5A, The More Balanced The Battery, The Lower The Current..
[Satisfactory Service]: Please Contact Us After Purchase, We Will Send You The Installation Program And Product Instruction Manual.We Provide 24-Hour Online Service,If You Encounter Any Problems, Please Email Seller Support (Not Amazon Support), We Will Give You A Perfect Solution..
[Capacitance Principle]: No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Charge Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack. The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
[Protection Switch]: With Sleep Protection, When The Voltage Is Lower Than 3V, It Will Automatically Stop And Enter The Sleep State To Reduce The Damage To The Battery..
Features
- [Product Information]: Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout. Model:3S-4S Suitable : Lithium Iron Phosphate 3.2V , NCM Ternary Polymer(3.7V),(Not Fit Lithium Titanate) ,Voltage is 1.8 V-4.5V ,Suggest Battery Capacity: 60-300AH.
- [Protection switch]: With sleep protection, when the voltage is lower than 3V, it will automatically stop and enter the sleep state to reduce the damage to the battery.
- [Original Design]:using the original ultra-low internal resistance MOS, 2OZ copper thickness PCB, equalizing current 0-5.5A, The more balanced the battery, the lower the current.
- [Capacitance Principle]: No external power supply is required,The working principle is Capacitor fit transfers the charge transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack. the equalization board can be connected to the battery to start the equalization work.
- [Satisfactory Service]: Please contact us after purchase, we will send you the installation program and product instruction manual.We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
- See more on Amazon...
Brand: Cywhrvzsf | Manufacturer: Cywhrvzsf
See On Amazon #14
Geynutaly 5.5A BMS 4S Active Balancer Board Li-Ion Lifepo4 LTO Battery Capacitor Equalizer Power Transfer with Protective Case
Asin: B0CQLC5YDS | Model: 500282810A2 | PartNumber: 500282810A2 | Ean: 4712846126689
Li-Ion/Lifepo4 /Lipo Version: 1,Balance Start Voltage: 3.0V-4.2V.
5,4S Quiescent Current Full State: (4.2V*4Cell) 16.5V 15Ma.
3,Maximum Balance Current: The Whole Group Error Is 0.1V1a; 0.5V3.5A; 1.0V5.5A (18Awg 30Cm Cable Test).
2,Balance Termination Voltage: 2.9V (Into Undervoltage Sleep State).
Features
- 4,3S quiescent current Full state: (4.2v*3cell) 12.6V 12mA
- 2,Balance termination voltage: 2.9V (into undervoltage sleep state)
- Li-ion/Lifepo4 /Lipo version: 1,Balance start voltage: 3.0V-4.2V
- 3,Maximum Balance current: The whole group error is 0.1V1A; 0.5V3.5A; 1.0V5.5A (18awg 30CM cable test)
- 5,4S quiescent current Full state: (4.2v*4cell) 16.5V 15mA
- See more on Amazon...
Brand: Geynutaly | Manufacturer: Geynutaly
Dimensions: 1.18 x 3.54 x 3.15 Inches | Weight: 0.22 pounds
See On Amazon #15
6S Active Equalizer Balancer Lifepo4 / / LTO Battery Energy Equalization Capacitor BMS Board
Asin: B0BP7NM1KN | Model: 500308744 | PartNumber: 500308744 | Ean: 4711789160330
The Quiescent Current Is About 12 Ma, And It Is Recommended That The Battery Capacity Should Be 30-300Ah For Batteries!.
The Appearance And Color Of Different Batches Of May Be Different, Which Will Not Affect The Use.
Working 1.8V-4.5V, Suitable For Ternary Lithium, Lithium Iron Phosphate, Lithium Titanate..
Working Principle, The Capacitor Fit Transfers The Charge Porter, And The Balance Board Is Connected To The Battery To The Balance Work. It Adopts The Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, And The Balance Current Is 0-5.5A. The More Balanced The Battery, The Smaller The Current. Reserve The Wiring Position Of The Sleep Switch, The Working Current Of The Sleep -Off Mode Is Less Than 0.1Ma, And The Equalization Accuracy Is Within 5Mv!.
Features
- With under- sleep protection, the will automatically stop entering the sleep state when the is lower than 3.0V, and the standby consumption is less than 0.1 mA.
- Working principle, the capacitor fit transfers the charge porter, and the balance board is connected to the battery to the balance work. It adopts the brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, and the balance current is 0-5.5A. The more balanced the battery, the smaller the current. Reserve the wiring position of the sleep switch, the working current of the sleep -off mode is less than 0.1mA, and the equalization accuracy is within 5mv!
- The quiescent current is about 12 mA, and it is recommended that the battery capacity should be 30-300AH for batteries!
- Working 1.8V-4.5V, suitable for ternary lithium, lithium iron phosphate, lithium titanate.
- The appearance and color of different batches of may be different, which will not affect the use
- See more on Amazon...
Brand: KVSERT | Manufacturer: KVSERT
Dimensions: 1.57 x 3.94 x 3.15 Inches | Weight: 0.25 Pounds
See On Amazon #16
5.5A BMS 4S Active Balancer Board Li-ion Lifepo4 LTO Battery Capacitor Equalizer Power Transfer with Protective Case
Asin: B0BGHVHMJ8
5.5A Bms 4S Active Balancer Board Li-Ion Lifepo4 Lto Battery Capacitor Equalizer Power Transfer With Protective Case.
Each Part Is Tested Before Shipment..
Features
- 100% brand new and high quality.
- Each part is tested before shipment.
- 5.5A BMS 4S Active Balancer Board Li-ion Lifepo4 LTO Battery Capacitor Equalizer Power Transfer with Protective Case
- See more on Amazon...
Brand: Mustpoint | Manufacturer: Mustpoint
See On Amazon #17
Active Equalizer Balancer Battery Energy Transfer Board Accessory Part Equalization Capacitor for NCM LFP LTO (8S)
Asin: B0BRSZCV6G | Model: Hilitandmgfxty1uqa-13 | PartNumber: Hilitandmgfxty1uqa-13
This Active Equalizer Can Be Applied In Ternary Lithium Battery, Lithium Iron Battery, And Lto Battery..
Adopting Ultra Low Internal Resistance Mos And Premium Printed Circuit Board To Ensure Efficient Balance Effect..
The Transfer Is Carried Out By Means Of The Internal Energy Transfer Of The Battery And The Balance Of The Entire Battery Pack, And No External Power Supply Is Required..
When The Voltage Is Lower Than 3.0V, It Will Automatically Stop And Enter The Dormant State, And The Standby Power Consumption Is Less Than 0.1Ma..
Features
- The working voltage is 1.8V to 4.2V, and the balance current is 0 to 5.5A, the better the balance, the smaller the balance current
- When the voltage is lower than 3.0V, it will automatically stop and enter the dormant state, and the standby power consumption is less than 0.1mA.
- This active equalizer can be applied in ternary lithium battery, lithium iron battery, and LTO battery.
- The transfer is carried out by means of the internal energy transfer of the battery and the balance of the entire battery pack, and no external power supply is required.
- Adopting ultra low internal resistance MOS and premium Printed Circuit Board to ensure efficient balance effect.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon #18
Pasotim 3PCS 4S Active Equalizer Balancer Lifepo4 / / LTO Battery Energy Equalization Capacitor BMS Board
Asin: B0BPCKKKZP | Model: 00308798A1 | PartNumber: 00308798A1 | Ean: 4712322740002
Working 1.8V-4.5V, Suitable For Ternary Lithium, Lithium Iron Phosphate, Lithium Titanate..
The Quiescent Current Is About 12 Ma, And It Is Recommended The Battery Capacity Should Be 30-300Ah For Batteries!.
Working Principle, The Capacitor Fit Transfers The Charge Porter, And The Balance Board Is Connected To The Battery To The Balance Work. It Adopts The Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, And The Balance Current Is 0-5.5A. The More Balanced The Battery, The Smaller The Current. Reserve The Wiring Position Of The Sleep Switch, The Working Current Of The Sleep -Off Mode Is Less Than 0.1Ma, And The Equalization Accuracy Is Within 5Mv!.
Capacitive Energy Equalization Board (Upgrade Version).
Features
- Capacitive energy equalization board (high 5mv, whole group equalization, not adjacent equalization)
- Capacitive energy equalization board (upgrade version)
- Working 1.8V-4.5V, suitable for ternary lithium, lithium iron phosphate, lithium titanate.
- Working principle, the capacitor fit transfers the charge porter, and the balance board is connected to the battery to the balance work. It adopts the brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, and the balance current is 0-5.5A. The more balanced the battery, the smaller the current. Reserve the wiring position of the sleep switch, the working current of the sleep -off mode is less than 0.1mA, and the equalization accuracy is within 5mv!
- The quiescent current is about 12 mA, and it is recommended the battery capacity should be 30-300AH for batteries!
- See more on Amazon...
Brand: Pasotim | Manufacturer: Pasotim
Dimensions: 3.15 x 3.94 x 3.54 inches | Weight: 0.50 pounds
See On Amazon #19
Geynutaly 6S Active Equalizer Balancer Lifepo4 / Lipo/LTO Battery Energy Equalization Capacitor BMS Board
Asin: B0CQF9L6P4 | Model: 500308744 | PartNumber: 500308744 | Ean: 4713893532478
Working Principle, The Capacitor Fit Transfers The Charge Porter, And The Balance Board Is Connected To The Battery To Start The Balance Work. It Adopts The Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, And The Balance Current Is 0-5.5A. The More Balanced The Battery, The Smaller The Current. Reserve The Wiring Position Of The Sleep Switch, The Working Current Of The Sleep Power-Off Mode Is Less Than 0.1Ma, And The Equalization Voltage Accuracy Is Within 5Mv!.
The Appearance And Color Of Different Batches Of Products May Be Different, Which Will Not Affect The Use.
With Under-Voltage Sleep Protection, The Voltage Will Automatically Stop Entering The Sleep State When The Voltage Is Lower Than 3.0V, And The Standby Power Consumption Is Less Than 0.1 Ma..
Working Voltage 1.8V-4.5V, Suitable For Ternary Lithium, Lithium Iron Phosphate, Lithium Titanate..
Features
- The quiescent current is about 12 mA, and it is recommended that the battery capacity should be 30-300AH for batteries!
- Working voltage 1.8V-4.5V, suitable for ternary lithium, lithium iron phosphate, lithium titanate.
- Working principle, the capacitor fit transfers the charge porter, and the balance board is connected to the battery to start the balance work. It adopts the brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, and the balance current is 0-5.5A. The more balanced the battery, the smaller the current. Reserve the wiring position of the sleep switch, the working current of the sleep power-off mode is less than 0.1mA, and the equalization voltage accuracy is within 5mv!
- With under-voltage sleep protection, the voltage will automatically stop entering the sleep state when the voltage is lower than 3.0V, and the standby power consumption is less than 0.1 mA.
- The appearance and color of different batches of products may be different, which will not affect the use
- See more on Amazon...
Brand: Geynutaly | Manufacturer: Geynutaly
Dimensions: 1.57 x 3.94 x 3.15 inches | Weight: 0.22 pounds
See On Amazon #20
Battery Active Equalizer Balancer Board 4 Series 6A Capacitive Active Equalization Board Energy Transfer Board
Asin: B09PYJL2DJ
Scope Of Application: All Ternary Lithium Batteries And Iron Lithium Batteries Are Universal..
Applicability: With Simple Indicating Switch, It Is Suitable For People With Weak Base To Operate..
Current: The Quiescent Current Is As Low As 5Ma, Which Can Achieve A High Accurate Equalization Of ±5Mv, And The Equalization Current Is 2~6A (This Refers To The Limit Current That The Circuit Board Can Withstand. In The Case Of Small Voltage Difference Or Large Internal Resistance Of The Battery, The Current Is Not So Big)..
High Accurate: The Price Is Lower Than Similar Capacitor Products, Which Keeps Each Battery Balanced And Prolongs The Service Life Of The Battery..
Features
- Active Capacitance Balance: Using a specially customized control chip, does not detect the pressure difference/designed to work for a long time without shutting down.
- High Accurate: The price is lower than similar capacitor products, which keeps each battery balanced and prolongs the service life of the battery.
- Scope of Application: All ternary lithium batteries and iron lithium batteries are universal.
- Current: The quiescent current is as low as 5mA, which can achieve a high accurate equalization of 5mV, and the equalization current is 2~6A (this refers to the limit current that the circuit board can withstand. In the case of small voltage difference or large internal resistance of the battery, the current is not so Big).
- Applicability: With simple indicating switch, it is suitable for people with weak base to operate.
- See more on Amazon...
Brand: YWBL-WH | Manufacturer: YWBL-WH
See On Amazon
Looking For Something Else?
Search