Eagles BTS7960 43A High Power Motor Driver, H-Bridge PWM Drive High Power Vehicle Motor Drive Module, Smart Car Driver Module for Arduino Current Limit
Asin: B0CBX8WZTB | Model: power-converters 07 | PartNumber: power-converters 07 | Ean: 5714403704834
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Control Method - Pwm Or Level, Just Need Four Lines From Mcu To Driver Module (Gnd. 5V. Pwm1. Pwm2); Isolation Chip 5 V Power Supply (Can Share With Mcu 5V), Able To Reverse The Motor Forward, Two Pwm Input Frequency Up To 25Khz; Two Heat Flow Passing Through An Error Signal Output.
Over Temperature Protection - The Driver Adopts A High-Power Drive H-Bridge Drive Module Composed Of Bts7960 Chips, With Thermal Over Temperature Protection Function, 5V Isolate With Mcu, And Effectively Protect Mcu; 5V Power Indicator On Board, Voltage Indication Of Motor Driver Output End; Can Solder Heat Sink.
Undervoltage Shutdown - If The Supply Voltage Drops Below 5.4V, The Motor Driver Will Shut Down And Will Not Start Until The Supply Voltage Increases To 5.5V Or Higher.
Specification - Maximum Current: 43A; Supply Voltage: 6V-27V; Input Level: 3.3V-5V, Over-Voltage Protection Value: 30V, Over-Current Protection Value: 84A, Over-Heat Protection Value: 200℃, Rated Power: Within 200W.
Features
- HIGH POWER - The BTS7960 based driver is a driver for controlling high-power DC motors capable of delivering up to 43A at supply voltages from 6 to 27V
- SPECIFICATION - Maximum current: 43A; supply voltage: 6V-27V; Input level: 3.3V-5V, over-voltage protection value: 30V, over-current protection value: 84A, over-heat protection value: 200 , rated power: within 200W
- CONTROL METHOD - PWM or level, Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2); isolation chip 5 V power supply (can share with MCU 5V), able to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output
- UNDERVOLTAGE SHUTDOWN - If the supply voltage drops below 5.4V, the motor driver will shut down and will not start until the supply voltage increases to 5.5V or higher
- OVER TEMPERATURE PROTECTION - The driver adopts a high-power drive H-bridge drive module composed of BTS7960 chips, with thermal over temperature protection function, 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board, voltage indication of motor driver output end; can solder heat sink
- See more on Amazon...
Brand: Eagles | Manufacturer: Eagles
See On Amazon Similar To Eagles BTS7960 43A High Power
Looking For Something Else?
Search