Bisda 13S BMS 48V 50A Li-ion PCB Protection Board with Balance Wire and NTC,Ten Functional protections, Common Port, for Solar Energy Storage, Balance Car Lithium-ion Battery Pack (13S 48V 50A)
Asin: B0CC1VZ5DT | Ean: 0749755120822 | UPC: 749755120822
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Preparation Before Installation】Before Installing The Bms Protective Board, It Is Necessary To Match The Voltage, Capacity, And Internal Resistance (The Voltage Difference Between The Battery Per Section Is Not Higher Than 0.05V, The Difference Between The Internal Resistance Is Not More Than 5Mω, And The Capacity Difference Is Less Than 30Mah). Otherwise The Battery Pack Will Not Be Able To Charge..
【High Quality】Bisida's Bms Utilizes Top Quality (A-Level) Protective Integrated Circuit Ic, From The Solution Of Industry Car Level.Bms Manufactured By High Quality Mos And Ic Imported.Support Oem/Odm Customization, If You Have Special Needs, You Can Contact Customer Service..
【Wiring Method】The Wiring Methods Of Common Ports Of Bms: B- Connection Battery Pack Negative , C- Connection Charging Negative/Output Negative. All The Positive Electrodes Are The Total Positive Pole From The Battery Pack..
【Operating Temperature】Bisida's Bms Supports (3.7V) Lithium-Ion Battery Charging And Discharging In Zones From 2.65V To 4.25V, With Low Temperature Protection Up To -20°C And High Temperature Protection Up To 70°C. Different Voltages And Currents Have Different Parameter Details. Confirmation Required. Please Communicate With The Seller To Confirm Accurate Data..
Features
- Multi -Function Protection Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.
- Operating Temperature Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20 C and high temperature protection up to 70 C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- Preparation Before Installation Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5M , and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- Wiring Method The wiring methods of Common ports of BMS: B- connection battery pack negative , C- connection charging negative/output negative. All the positive electrodes are the total positive pole from the battery pack.
- High Quality Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
- See more on Amazon...
Brand: Bisida | Manufacturer: Bisida
See On Amazon Similar To Bisda 13S BMS 48V 50A
#1
Bisida 12S BMS 38.4V 50A Lifepo4 Battery Management System PCB Protection Board with Balance Wire and NTC,Ten Functional Protections, Common Port, for Lifepo4 Battery Pack (12S 38.4V 50A)
Asin: B0CC94DNJ6 | Model: Bisida Lifepo4 BMS 12S 38.4V | PartNumber: Bisida Lifepo4 BMS 12S 38.4V | Ean: 0749755334519 | UPC: 749755334519
【High -Precision Monitoring】Before Installing The Bms Protective Board, It Is Necessary To Match The Voltage, Capacity, And Internal Resistance (The Voltage Difference Between The Battery Per Section Is Not Higher Than 0.05V, The Difference Between The Internal Resistance Is Not More Than 5Mω, And The Capacity Difference Is Less Than 30Mah). Otherwise The Battery Pack Will Not Be Able To Charge..
【High Quality】Bisida 'Bms Use Top Quality (A-Level) Protective Integrated Circuit Ic, From The Solution Of Industry Car Level.Bms Manufactured By High Quality Mos And Ic Imported.Support Oem/Odm Customization, If You Have Special Needs, You Can Contact Customer Service..
【Wiring Method】Common Port Wiring Methods: B- Battery Pack Negative , C-Charging Negative/Output Negative. All The Positive Electrodes Are The Total Positive Pole From The Battery Pack..
【Operating Temperature】The Lifepo4 Battery (3.2V) Supports Charging And Discharging From 2.3V To 3.65V Zones, Low Temperature Protection Up To -20°C, And High Temperature Protection Up To 70°C. Different Voltages, Currents. There Are Different Parameter Details. If You Need To Confirm. Please Communicate With The Seller To Confirm Accurate Data..
Features
- Multi -function protection The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, Downtime protection Voltage balance(passive balance), etc.
- Operating temperature The Lifepo4 battery (3.2V) supports charging and discharging from 2.3V to 3.65V zones, low temperature protection up to -20 C, and high temperature protection up to 70 C. Different voltages, currents. There are different parameter details. If you need to confirm. Please communicate with the seller to confirm accurate data.
- High -precision monitoring Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5M , and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- Wiring method Common port wiring methods: B- battery pack negative , C-charging negative/output negative. All the positive electrodes are the total positive pole from the battery pack.
- high quality Bisida 'BMS use top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
- See more on Amazon...
Brand: Bisida | Manufacturer: Bisida
See On Amazon #2
DALY BMS 13S 48V 30A Li-ion Battery Protection Module PCB Protection Board with Balance Leads BMS for 18650 Battery Pack 48V(Standard BMS,30A)
Asin: B0876NQ88P | Ean: 0782912398146 | UPC: 782912398146
[Easy To Install]Easy To Plug And Unplug, Which Allows You To Effortlessly Create An Electrical Connection Between The Battery Pack And The Bms..
[Packing List]3.7V Li-Ion Ncm Bms*1,Ntc Sensor*1,Sampling Cable*1,Instruction Manual*1.Quality Guarantee--- Iso/ Fcc/ Rohs/ Pse/ Ce Approved.
[Note] Standard Bms Dosen't Have Communication Functions. If You Need Smart Bms, Active Balancer, Parallel Module Or Other Accessories, Please Contact Online Customer Service.We Offer 24-Hour One-On-One Customer Service And Lifetime Technical Support..
[Double Protection] Double Protection By Injection Patent Technology And Patent Shell.Waterproof,Dustproof,Shockproof And Anti-Static;High-Quality Components, Pressure-Resistant And Durable Material, High Acquisition Accuracy..
Features
- [DALY BMS]Overcurrent,Overcharge,Overdischarge,Short circuit, Temperature protection.DALY BMS maximizes optimizes the lithium battery performance, and extends the battery lifetime to a large extent.
- [Double Protection] Double protection by injection patent technology and patent shell.Waterproof,Dustproof,Shockproof and Anti-static;High-quality components, pressure-resistant and durable material, high acquisition accuracy.
- [Easy to install]Easy to plug and unplug, which allows you to effortlessly create an electrical connection between the battery pack and the BMS.
- [Note] Standard BMS dosen't have communication functions. If you need smart BMS, active balancer, parallel module or other accessories, please contact online customer service.We offer 24-hour one-on-one customer service and lifetime technical support.
- [Packing List]3.7V Li-ion NCM BMS*1,NTC sensor*1,Sampling cable*1,Instruction Manual*1.Quality Guarantee--- ISO/ FCC/ RoHS/ PSE/ CE APPROVED
- See more on Amazon...
Brand: DALY | Manufacturer: Dongguan Daly Electronics Co., Ltd.
Dimensions: 0.47 x 2.40 x 3.15 inches | Weight: 0.28 pounds
See On Amazon #3
14 Series 48V Li Battery 14s bms 52v Cell BMS PCB Balance Board Module Load Disconnect
Asin: B0B7B282J4
The Board Has Short Circuit Function, Overcharge Function, Over Discharge Function, Balanced Voltage Function, Low Conduction Internal Resistance Functions..
Applied To Rechargeable Lithium Ion Battery, Lithium Ion Polymer Battery..
Suitable For Lithium Batteries With Nominal Voltage 3.7V 10-14 Strings.
It Adopts High Current And High Withstand Voltage Discharge Moss. The Internal Components Are Brushed With Three Anti-Adhesive (Waterproof, Anti-Static, Anti-Interference), Stable Ans Reliable Quality..
Features
- 100% brand new and high quality.
- It adopts high current and high withstand voltage discharge MOSS. The internal components are brushed with three anti-adhesive (waterproof, anti-static, anti-interference), stable ans reliable quality.
- The board has short circuit function, overcharge function, over discharge function, balanced voltage function, low conduction internal resistance functions.
- Suitable for lithium batteries with nominal voltage 3.7V 10-14 strings
- Applied to rechargeable lithium ion battery, lithium ion polymer battery.
- See more on Amazon...
Brand: Eujgoov | Manufacturer: Eujgoov
Dimensions: 1.57 x 3.94 x 2.76 inches
See On Amazon #4
ANMBEST 13S 48V 35A PCB BMS Protection Board Li-ion Lithium Battery Charger Lipo Cell Module with Balance for Battery Cell Pack
Asin: B09KGTHL5H | Model: ANMBEST_MD390 | PartNumber: ANMBEST_MD390 | Ean: 8939317680815
The Protection Board Is For 13 Series Cell Li-Ion Batteries, It Can Be Used For 3.7V Ternary Batteries, Manganese Acid Batteries And Cobalt Acid Batteries..
It Is Suitable For Electric Car, Electric Power Assistant Car, Skateboard Car, Inverter, Etc..
It Has Balance Function Which Would Ensure Each Battery Cell Being Fully Charged At Same Time..
With Over-Discharge Protection, Overcurrent Protection, Overcharge Protection, Temperature Control Protection Function, Safe And Reliable..
Features
- High-accuracy voltage detection circuit, fine workmanship and durable.
- With Over-discharge protection, overcurrent protection, overcharge protection, temperature control protection function, safe and reliable.
- The protection board is for 13 series cell Li-ion batteries, it can be used for 3.7V ternary batteries, manganese acid batteries and cobalt acid batteries.
- It has balance function which would ensure each battery cell being fully charged at same time.
- It is suitable for electric car, electric power assistant car, skateboard car, inverter, etc.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: ANMBEST
Weight: 0.11 pounds
See On Amazon #5
Battery Protection BMS PCB Board for 13Series 48V/54.6V Li-Ion Li-Polymer Batteries
Asin: B074XFYH3G | Model: Walfrontkuyp9ge57f | PartNumber: Walfrontkuyp9ge57f | Ean: 0736691474317 | UPC: 736691474317
Parameters: Charging 5A, Discharging 15A, Can Be Used For Electric Bicycles With Motor Power Less Than 500W.
Easy To Use: The Charging Connector And The Discharge Connector Are Separated, Easy To Use.
Features: High Voltage Resistance, Low Conductivity, Powerful And Professional.
Protection Functions: Overcharge Protection, Over-Discharge Protection, Over-Current Protection, Short-Circuit Protection And Other Multiple Protection Functions.
Features
- Application: Designed for 13-cell lithium batteries, can be used for ternary batteries, manganese acid batteries, cobalt acid batteries
- Protection functions: overcharge protection, over-discharge protection, over-current protection, short-circuit protection and other multiple protection functions
- Parameters: Charging 5A, discharging 15A, can be used for electric bicycles with motor power less than 500W
- Features: High voltage resistance, low conductivity, powerful and professional
- Easy to use: The charging connector and the discharge connector are separated, easy to use
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #6
Bisida 4S BMS 12.8V 50A Lifepo4 Battery Management System PCB Protection Board with Balance Wire and NTC,Ten Functional protections, Common Port, for Lifepo4 Battery Pack (4S 12.8V 50A)
Asin: B0CCD63QNJ | Ean: 0749755334816 | UPC: 749755334816
【Preparation Before Installation】Before Installing The Bms Protective Board, It Is Necessary To Match The Voltage, Capacity, And Internal Resistance (The Voltage Difference Between The Battery Per Section Is Not Higher Than 0.05V, The Difference Between The Internal Resistance Is Not More Than 5Mω, And The Capacity Difference Is Less Than 30Mah). Otherwise The Battery Pack Will Not Be Able To Charge..
【High Quality】Bisida's Bms Utilizes Top Quality (A-Level) Protective Integrated Circuit Ic, From The Solution Of Industry Car Level.Bms Manufactured By High Quality Mos And Ic Imported.Support Oem/Odm Customization, If You Have Special Needs, You Can Contact Customer Service..
【Wiring Method】The Wiring Methods Of Common Ports Of Bms: B- Connection Battery Pack Negative , C- Connection Charging Negative/Output Negative. All The Positive Electrodes Are The Total Positive Pole From The Battery Pack..
【Operating Temperature】Bisida's Bms Supports (3.2V) Lifepo4 Battery Charging And Discharging In Zones From 2.3V To 3.65V, With Low Temperature Protection Up To -20°C And High Temperature Protection Up To 70°C. Different Voltages And Currents Have Different Parameter Details. Confirmation Required. Please Communicate With The Seller To Confirm Accurate Data..
Features
- Multi -Function Protection Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, Downtime protection Voltage balance(passive balance), etc.
- Operating Temperature Bisida's BMS supports (3.2V) Lifepo4 battery charging and discharging in zones from 2.3V to 3.65V, with low temperature protection up to -20 C and high temperature protection up to 70 C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- Preparation Before Installation Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5M , and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- Wiring Method The wiring methods of common ports of BMS: B- connection battery pack negative , C- connection charging negative/output negative. All the positive electrodes are the total positive pole from the battery pack.
- High Quality Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
- See more on Amazon...
Brand: Bisida | Manufacturer: Bisida
See On Amazon #7
BMS PCB Board 13S 48V 35A Li Ion Battery Board with Balance Function for Power Charging
Asin: B09KCL5JMM
Multiple : Possess Multiple Functions Such As Overcharge , Overdischarge , Short Circuit , Etc..
Good Quality Pcb: Adopt Good Quality Pcb Materials, With Reliability And Miniaturization, Good Maintenance And Interchangeability.
Extend Battery Pack Life: Bms Pcb Board Can Effectively Works For Extend The Life Of The Battery Pack.
Separated Charging And Discharging Port: The Charging Port And The Discharging Port Are Separated, Easy For You To Use.
Features
- Prevent Overcharging: Li ion battery board is suitable for power charging, which can be used to prevent electric bicycles from overcharging
- Separated Charging And Discharging Port: The charging port and the discharging port are separated, easy for you to use
- Multiple : Possess multiple functions such as overcharge , overdischarge , short circuit , etc.
- Extend Battery Pack Life: BMS PCB board can effectively works for extend the life of the battery pack
- Good Quality PCB: Adopt good quality PCB materials, with reliability and miniaturization, good maintenance and interchangeability
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
See On Amazon #8
BMS PCB Board 13S 30A Lithium Battery BMS 48v 13s Cell Board Charging with Balance Charging
Asin: B0B7SM3168
Functions: Provide A Variety Of Functions Including Overcharge, Overdischarge, Overcurrent And Short Circuit ..
Quality Assurance: This Product Has Gone Through Load And Aging Test For Quality Assurance..
Thickened Aluminum Fin: Equipped With Thickened Aluminum Fin To Achieve Quick Heat Dissipation..
Prolong Battery Life: With Balance Charging To Balance The Characteristic Of Each Battery In Battery Pack And Prolong Battery Life..
Features
- FAST AND SAFE CHARGING: intelligent lithium cell management IC for fast and safe charging.
- PROLONG BATTERY LIFE: With balance charging to balance the characteristic of each battery in battery pack and prolong battery life.
- FUNCTIONS: Provide a variety of functions including overcharge, overdischarge, overcurrent and short circuit .
- THICKENED ALUMINUM FIN: Equipped with thickened aluminum fin to achieve quick heat dissipation.
- QUALITY ASSURANCE: This product has gone through load and aging test for quality assurance.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 2.36 x 3.15 x 2.76 inches
See On Amazon #9
pizarra BMS 14S 52V 35A - Lithium Battery Charger Protection Board Battery BMS Board with Balance Function for E-Bike
Asin: B0BV1KDHCL | Model: 500284455 | PartNumber: 500284455 | Ean: 4713118460975
Charging : 58.8V.
Overcharge Detection : 4.28 +/- 0.05V.
Continuous Discharge Current: 35A.
Instantaneous Discharge Current:100A.
Features
- Maximum charging current: 7A
- Instantaneous discharge current:100A
- Charging : 58.8V
- Continuous Discharge Current: 35A
- Overcharge detection : 4.28 +/- 0.05V
- See more on Amazon...
Brand: pizarra | Manufacturer: pizarra
Dimensions: 1.97 x 4.72 x 2.76 inches | Weight: 0.15 pounds
See On Amazon #10
PCB Protection Board,13S 50A Lithium Battery Charging Board Li-ion Lithium Battery Protection Board BMS Charger Module, PCB Cell Protection Board
Asin: B07KT4LHSX | Model: Wal fronthgri54o6mn | PartNumber: Wal fronthgri54o6mn | Ean: 0794419625625 | UPC: 794419625625
Fast And Safe Charging: The Battery Board Adopts Intelligent Lithium Cell Management Ic For Fast And Safe Charging.
High Quality: The Bms Pcb Board Has Gone Through Load And Aging Test For Quality Assurance, Can Be Used For Long Time.
Extends Battery Life: The Battery Module Adopts Balance Charging To Balance The Characteristic Of Each Battery In Battery Pack And Prolong Battery Life.
Multi-Over : The Battery Charger Module Provides A Variety Of Functions Including Overcharge, Overdischarge, Short Circuit, And Temperature.
Features
- QUICK HEAT DISSIPATION: The lithium battery board equipped with thickened aluminum fin to achieve quick heat dissipation
- MULTI-OVER : The battery charger module provides a variety of functions including overcharge, overdischarge, short circuit, and temperature
- FAST AND SAFE CHARGING: The battery board adopts intelligent lithium cell management IC for fast and safe charging
- EXTENDS BATTERY LIFE: The battery module adopts balance charging to balance the characteristic of each battery in battery pack and prolong battery life
- HIGH QUALITY: The BMS PCB board has gone through load and aging test for quality assurance, can be used for long time
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon #11
BMS PCB Board 13S 48V 35A Li Ion Battery Board with Balance Function for Power Charging
Asin: B0CKVS9461 | Model: WALFRONTeyhq4a5ggx | PartNumber: WALFRONTeyhq4a5ggx
Extend Battery Pack Life: Bms Pcb Board Can Effectively Works For Extend The Life Of The Battery Pack.
Prevent Overcharging: Li Ion Battery Board Is Suitable For Power Charging, Which Can Be Used To Prevent Electric Bicycles From Overcharging.
Good Quality Pcb: Adopt Good Quality Pcb Materials, With Reliability And Miniaturization, Good Maintenance And Interchangeability.
Separated Charging And Discharging Port: The Charging Port And The Discharging Port Are Separated, Easy For You To Use.
Features
- Multiple : Possess multiple functions such as overcharge , overdischarge , short circuit , etc.
- Separated Charging And Discharging Port: The charging port and the discharging port are separated, easy for you to use
- Extend Battery Pack Life: BMS PCB board can effectively works for extend the life of the battery pack
- Good Quality PCB: Adopt good quality PCB materials, with reliability and miniaturization, good maintenance and interchangeability
- Prevent Overcharging: Li ion battery board is suitable for power charging, which can be used to prevent electric bicycles from overcharging
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #12
AUNMAS 13S 30A Lithium Battery, 13s 30a 48v BMS BMS 13s Board BMS PCB Board Charging with Balance Charging
Asin: B0BNNY4JZQ | Model: AUNMASu6q53y9xb1 | PartNumber: AUNMASu6q53y9xb1
Fast And Safe Charging: Adopting An Intelligent Lithium Cell Management Ic, This Product Enables Fast And Safe Charging, Minimizing Charging Time And Maximizing Efficiency..
Quality Assurance: This Product Has Undergone Rigorous Load And Aging Tests To Guarantee Top-Notch Quality, Providing You With A Reliable Choice For Your Power Needs..
Battery Life Optimization: Featuring Balance Charging, This Product Balances The Characteristics Of Each Battery In The Pack, Prolonging Their Overall Lifespan And Ensuring Consistent Performance..
Comprehensive : With A Variety Of Functions Including Overcharge, Overdischarge, Short Circuit, And Temperature , Your Batteries And Device Are Safeguarded Against Potential Risks..
Features
- Efficient Heat Dissipation: Equipped with thickened aluminum fin, this product achieves quick heat dissipation, ensuring optimal performance and durability.
- Comprehensive : With a variety of functions including overcharge, overdischarge, short circuit, and temperature , your batteries and device are safeguarded against potential risks.
- Fast and Safe Charging: Adopting an intelligent lithium cell management IC, this product enables fast and safe charging, minimizing charging time and maximizing efficiency.
- Battery Life Optimization: Featuring balance charging, this product balances the characteristics of each battery in the pack, prolonging their overall lifespan and ensuring consistent performance.
- Quality Assurance: This product has undergone rigorous load and aging tests to guarantee top-notch quality, providing you with a reliable choice for your power needs.
- See more on Amazon...
Brand: AUNMAS | Manufacturer: AUNMAS
See On Amazon #13
48V 15A 13s BMS BMS 13s, Board Aluminum Alloy Lithium Ion Battery Pack BMS with Balancing for Electric Vehicles Scooters
Asin: B0CB22RJH5 | Model: WALFRONT2cusnxmz86 | PartNumber: WALFRONT2cusnxmz86
13S Lithium Battery Protection Board: The Protection Board Is A 13 Cell Lithium Ion Battery, Which Can Be Used For 3.7V Ternary Batteries, Manganese Acid Batteries, And Cobalt Acid Batteries.
Application: Has A Wide Range Of Applications, Suitable For Electric Vehicles, Scooters, Inverters, Etc., To Meet Your Needs.
Aluminum Alloy Material: Made Of Aluminum Alloy Material, The Bms Has The Characteristics Of Durability And Long Service Life.
Safe And Reliable: With Temperature Control Protection Function, With Safe And Reliable Characteristics, You Can Use The Bms With Confidence.
Features
- Battery Protection Module: The battery supports overcharge protection, discharge protection and short circuit protection
- Safe And Reliable: With temperature control protection function, with safe and reliable characteristics, you can use the BMS with confidence
- 13s Lithium Battery Protection Board: The protection board is a 13 cell lithium ion battery, which can be used for 3.7V ternary batteries, manganese acid batteries, and cobalt acid batteries
- Aluminum Alloy Material: Made of aluminum alloy material, the BMS has the characteristics of durability and long service life
- Application: Has a wide range of applications, suitable for electric vehicles, scooters, inverters, etc., to meet your needs
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #14
Battery BMS PCB Board for 13Series 48V/54.6V Li-Ion Li-Polymer Batteries with Balance for Battery Cell Pack
Asin: B07NQ1KN7Q | Model: Yosoo9kh7265nye | PartNumber: Yosoo9kh7265nye | Ean: 0783335161027 | UPC: 783335161027
Specifications: Charging 5A, Discharging 15A, Over-Current 45A, Suitable For Electric Bicycles With ¡Ü500w Motor..
Safe To Use: Stable Various Protective Functions For Charging And Discharging, Such As Accurate Overcharge , Over-Discharge , Over Current And Short Circuit ..
Function: It Has High Voltage Withstanding And Low Conduction Resistance Function..
Charging Discharging Separated: Charging Connector And Discharging Connector Are Separated, Continuous Discharging Current Is 15A..
Features
- BATTERIES BOARD: The board is for 13 series Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries.
- CHARGING DISCHARGING SEPARATED: Charging connector and discharging connector are separated, continuous discharging current is 15A.
- SPECIFICATIONS: Charging 5A, discharging 15A, over-current 45A, suitable for electric bicycles with 500W motor.
- FUNCTION: It has high voltage withstanding and low conduction resistance function.
- SAFE TO USE: Stable various protective functions for charging and discharging, such as accurate overcharge , over-discharge , over current and short circuit .
- See more on Amazon...
Brand: Yosoo
Dimensions: 1.18 x 3.15 x 2.76 inches | Weight: 0.02 pounds
See On Amazon #15
Bisida 13S BMS 48V 20A Li-ion PCB Protection Board with NTC, Ten Functional protections, Split Ports, for Lithium-ion Battery Pack (13S 48V 20A)
Asin: B0CC1BKWDB | Model: 13S 48V 20A | PartNumber: 13S 48V 20A | Ean: 0749755110380 | UPC: 749755110380
【Preparation Before Installation】Before Installing The Bms Protective Board, It Is Necessary To Match The Voltage, Capacity, And Internal Resistance (The Voltage Difference Between The Battery Per Section Is Not Higher Than 0.05V, The Difference Between The Internal Resistance Is Not More Than 5Mω, And The Capacity Difference Is Less Than 30Mah). Otherwise The Battery Pack Will Not Be Able To Charge..
【High Quality】Bisida's Bms Utilizes Top Quality (A-Level) Protective Integrated Circuit Ic, From The Solution Of Industry Car Level.Bms Manufactured By High Quality Mos And Ic Imported.Support Oem/Odm Customization, If You Have Special Needs, You Can Contact Customer Service..
【Wiring Method】The Wiring Methods Of Split Ports Of Bms: B- Connection Battery Pack Negative, C- Connection Charging Negative, P- Connection Output Negative. All The Positive Electrodes Are The Total Positive Pole From The Battery Pack..
【Operating Temperature】Bisida's Bms Supports (3.7V) Lithium-Ion Battery Charging And Discharging In Zones From 2.65V To 4.25V, With Low Temperature Protection Up To -20°C And High Temperature Protection Up To 70°C. Different Voltages And Currents Have Different Parameter Details. Confirmation Required. Please Communicate With The Seller To Confirm Accurate Data..
Features
- Multi -Function Protection Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, etc. This is not with a Balance Wire
- Operating Temperature Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20 C and high temperature protection up to 70 C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- Preparation Before Installation Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5M , and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- Wiring Method The wiring methods of Split Ports of BMS: B- connection battery pack negative, C- connection charging negative, P- connection output negative. All the positive electrodes are the total positive pole from the battery pack.
- High Quality Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
- See more on Amazon...
Brand: Bisida | Manufacturer: Bisida
Warranty: 1 Year
See On Amazon #16
13S BMS 20 Amp 48 Volt, 13S 48V 20A BMS Lithium Battery Board, BMS with Balance, Lithium Battery PCB Board with Balance for 13 Series Cell Li-ion Batteries Ternary Batteries
Asin: B08PKLW1HN | Model: Yosoo Health Gear3qgbot28i0 | PartNumber: Yosoo Health Gear3qgbot28i0
[Safety Overcharge And Overdischarge Protection]:This Ternary Batteries Protection Board Can Provide Safe Overcharge And Overdischarge Protection.
[Scope Of Application]: This Li-Ion Batteries Protection Board Has 1 Protection Board And 1 Cable, Suitable For 13 Lithium-Ion Batteries, And Can Be Used For Ternary Batteries And Other Batteries.
[]: This Battery Protection Board With Balance Is Made Of High-Quality Materials, With Good Wear Resistance And Durability.
[Good Balance Function]: This 13S Lithium Battery Protection Board Has A Good Balance Function To Ensure That Each Battery Cell Is Fully Charged At The Same Time.
Features
- [The Charging Interface and the Discharging Interface Are Separated]:The charging and discharging connectors of this lithium battery pcb protection board adopt a separate design, which is safer and more convenient
- [Good Balance Function]: This 13s lithium battery protection board has a good balance function to ensure that each battery cell is fully charged at the same time
- [Safety Overcharge and Overdischarge Protection]:This ternary batteries protection board can provide safe overcharge and overdischarge protection
- []: This battery protection board with balance is made of high-quality materials, with good wear resistance and durability
- [Scope of Application]: This li-ion batteries protection board has 1 protection board and 1 cable, suitable for 13 lithium-ion batteries, and can be used for ternary batteries and other batteries
- See more on Amazon...
Brand: Yosoo Health Gear | Manufacturer: Yosoo Health Gear
Dimensions: 1.57 x 5.12 x 2.76 inches | Weight: 0.18 pounds
See On Amazon #17
Acxico 1Pcs 48V 35A 13S BMS PCB Board Li-ion 18650 Battery Protection Board with Balance Integrated Circuits Board for e-bikeBattery
Asin: B0836Q2NPJ | Model: LB200 | PartNumber: LB200 | Ean: 0797806003020 | UPC: 797806003020
With Equilibrium Function To Keep Each Cell In Balance And Good Service Life..
Size: Approx. 69*51.5*10Mm;Cable Length: Approx. 300Mm.
Used For 13 Series 35A 48V Li-Ion Batteries, Well Balanced For Protecting Your Battery..
Overcharge Protection, Over Discharge Protection, Over Current Protection,Short Circuit Protection, Temperature Protection..
Features
- Protection circuit board plays an important role in the usage of battery,it can protect battery from overcharging, over-discharging, over current, over temperature and short circuit, etc.Apply it appropriately to long your batteries service life.
- Overcharge protection, over discharge protection, over current protection,short circuit protection, temperature protection.
- With equilibrium function to keep each cell in balance and good service life.
- Used for 13 series 35A 48V li-ion batteries, well balanced for protecting your battery.
- Size: approx. 69*51.5*10mm;Cable length: approx. 300mm
- See more on Amazon...
Brand: Acxico | Manufacturer: Acxico
See On Amazon #18
13S 48V 20A Cell Battery BMS PCB Board with Balance Function
Asin: B07DNHBDXV | Model: 5824093162 | PartNumber: 5824093162 | Ean: 0763741471071 | UPC: 763741471071
Stableit Has Balance Function Which Would Ensure Each Battery Cell Being Fully Charged At Same Time.
Unique Designstable Various Charging And Discharging Protective Functions Are Great For 13S Battery.
Use Safety:Support Overcharge , Over-Discharge And Short Circuit.
Materiacharging Connector And Discharging Connector Are Separated, Continuous Discharging Current Is 20A.
Features
- WIDE APPLICATION:The board is for 13 series cell Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries
- MATERIACharging connector and discharging connector are separated, continuous discharging current is 20A
- STABLEIt has balance function which would ensure each battery cell being fully charged at same time
- USE SAFETY:Support overcharge , over-discharge and short circuit
- UNIQUE DESIGNStable various charging and discharging protective functions are great for 13S battery
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.15 pounds
See On Amazon #19
Li-Polymer Battery Pack Protection Board Automatic Activation BMS Module for 13S 48V/54.6V Batteries Silver
Asin: B07DRJ3LFC | Model: Hilitandnwso0v56af | PartNumber: Hilitandnwso0v56af | Ean: 0763741597801 | UPC: 763741597801
Vital Data: Charging 5A, Discharging 15A, Over-Current 45A, Suitable For Electric Bicycles With 500W Motor..
Perfect Performance: Stable Various Protective Functions For Charging And Discharging, Such As Accurate Overcharge Protection, Over-Discharge Protection, Over Current Protection And Short Circuit Protection..
Functions: Bms For Battery Pack 48V Has High Voltage Withstanding And Low Conduction Resistance Function..
Charging Discharging Separated: Charging Connector And Discharging Connector Are Separated, Continuous Discharging Current Is 15A..
Features
- APPLICATION RANGE: The 13s bms protection board is for 13 series Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries.
- CHARGING DISCHARGING SEPARATED: Charging connector and discharging connector are separated, continuous discharging current is 15A.
- VITAL DATA: Charging 5A, discharging 15A, over-current 45A, suitable for electric bicycles with 500W motor.
- FUNCTIONS: BMS for battery pack 48v has high voltage withstanding and low conduction resistance function.
- PERFECT PERFORMANCE: Stable various protective functions for charging and discharging, such as accurate overcharge protection, over-discharge protection, over current protection and short circuit protection.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.13 pounds
See On Amazon
Looking For Something Else?
Search