SENSTREE G1/2 Flow Hall Sensor with NPT Thread, 1-30L/Min Flow Meter, Flowmeter Counter, Arduino, Raspberry Pi, and Reverse Osmosis Filter Compatible
Asin: B0CC949527
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Water Flow Sensor Is Light, Has A Nimble Outline, Small, And Is Easy To Install—The Bearings Used In The Rotating Part..
Installed By Flow Direction In The Product, Otherwise, There Is No Signal Output..
It Is Mainly Used In Water Heaters, Coffee Machines, Water Purifiers, Drinking Fountains, Beverage Machines, Campus Smart Card Equipment, Etc..
There Is An Integrated Magnetic Hall Effect Sensor That Outputs An Electrical Pulse With Every Revolution. The Hall Effect Sensor Is Sealed From The Water Pipe And Allows The Sensor To Stay Safe And Dry..
1-30L/Min.
Features
- NPT Thread
- 1-30L/min
- The Water Flow Sensor is light, has a nimble outline, small, and is easy to install the bearings used in the rotating part.
- There is an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.
- Installed by flow direction in the product, otherwise, there is no signal output.
- It is mainly used in water heaters, coffee machines, water purifiers, drinking fountains, beverage machines, campus smart card equipment, etc.
- See more on Amazon...
Brand: SENSTREE | Manufacturer: SENSTREE
See On Amazon Similar To SENSTREE G1 2 Flow
#1
SENSTREE G1" Water Flow Sensor, Food-Grade Hall Effect Sensor Flow Meter Flowmeter Counter 1-60L/min - Arduino, Raspberry Pi, and Reverse Osmosis Filter Compatible
Asin: B07QRZ6Q2B | Model: FL-808ZJ | PartNumber: FL-808ZJ | Ean: 0713458680853 | UPC: 713458680853
Waterproof, Heat-Resistant, Pressure-Resistant, Cold-Resistant..
Output Waveform: Square Waves, Output Pulse Signal.R Pa20222 2023Sensor: Hall Effect.
Small Size, Easy To Install, All Materials Are In Line With Rohs Testing Standards..
Features
- Flow Range:1-60L/min, Working Voltage Range: DC 5-18V.
- Small size, easy to install, all materials are in line with RoHS testing standards.
- Waterproof, heat-resistant, pressure-resistant, cold-resistant.
- Output waveform: square waves, output pulse signal.R PA20222 2023Sensor: Hall effect
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
See On Amazon #2
DIGITEN FS-C01 G1/2" BSP Male Thread Brass Water Flow Switch with Filter 1-30L/min, 0-2A/ 0-220V(AC or DC)
Asin: B07QRXGT7J | Model: FS-C01ZJ | PartNumber: FS-C01ZJ | Ean: 0713458680792 | UPC: 713458680792
🌟🌊【 Easy To Install】Our Flow Sensor Has Great Quality And It Is Waterproof, Heat Resistance, Pressurresistance, Cold Resistance, Small Size, Stable And Reliable..
🌟🌊【 Widely Applications】 This Flow Sensor Is Suitable For Water Heaters, Pumps, Hot Tub, Boiler, Water Dispensers, Coffee Machines, Hot Card Machines, Steam Equipment, Water System, The Campus Card Sales, Selling Self-Help Water Systems, Water Treatment Equipment, Cooling Systems, Mechanical Equipment, Instrumentation, Pharmaceutical Equipment..
🌟💧 【Specification】This Flow Sensor`S Operation Voltage: 0-220V(Ac Or Dc), Working Current: 0-2A, Max Working Pressure: 1.75 Mpa. Flow Range: 1-30L/Min..
🌟💧 【Specail Design】This Flow Sensor Has Equipped With Filter Water Entry. It Have A Filter To Prevent Sediments From Getting In The Workings Of The Sensor. Thread Type: 1/2" Bsp Male Thread. Male Thread External Diameter: 20.55Mm..
Features
- Safe and Reliable This flow sensor switch is made of brass, all materials are in line with ROHS testing standards. It's a safety device that shuts off the current to the device (heaters, pumps, etc.) when it senses no water flow. When connecting the load, please add a relay.
- Specail Design This flow sensor has equipped with filter water entry. It have a filter to prevent sediments from getting in the workings of the sensor. Thread type: 1/2 BSP Male Thread. Male Thread External Diameter: 20.55mm.
- Easy to install Our flow sensor has great quality and it is waterproof, heat resistance, pressurresistance, cold resistance, small size, stable and reliable.
- Specification This flow sensor`s operation voltage: 0-220V(AC or DC), Working current: 0-2A, max working pressure: 1.75 MPa. Flow range: 1-30L/min.
- Widely Applications This flow sensor is suitable for water heaters, pumps, hot tub, boiler, water dispensers, coffee machines, hot card machines, steam equipment, water system, the campus card sales, selling self-help water systems, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical equipment.
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
See On Amazon #3
DIGITEN Water Flow Control Meter LCD Display Controller+G1/2" Water Hall Sensor Flow Meter Flowmeter Counter 1-30L/min+G1/2" Solenoid Valve Normally Closed N/C+DC 12V Power Adapter
Asin: B07GSVHCQL | Model: ZJ-DFC15FV408 | PartNumber: ZJ-DFC15FV408
★【Work With All Hall Effect Flow Sensor】: It Can Work With Various Different Flow Sensors Through Adjust The K Value. High Quality, Come With Temperature Sensor, It Can Measure Liquid Temperature..
★【Package Includes & Warranty】: Thread Type: Bsp, But It Can Work With Npt Thread. The Controller Will Come With G1/2" Flow Sensor, G1/2" Solenoid Valve(N/C), Temperature Sensor(It Can Measure Liquid Temperature) And 12Vdc Power Adapter. 12 Month Warranty!.
★【Wide Applications】: Swimming Pool, Water Dispenser, Coffee Machine, Drip Irrigation System, Beer Brewing, Etc. For Example, If You Want 5 Liters Of Water, You Can Set Up 5 Liters Of Water On The Dfc15 Controller. When The Water In The Container Reaches 5 Liters, The Controller Will Control The Solenoid Valve To Close It, The Water Flow Automatically Stops, And You Just Get 5 Liters Of Water. Please Select A Suitable Flow Meter. An Oil Flow Meter Is Required For Liquids Other Than Water..
★【Quantitative Control & Alarm Function】: The Controller Will Turn Off The Solenoid Valve Automatically When Flow Reach To The Setting Value You Desire, It's Easy To Install And Control. It Can Automatically Stop Water Filling Into Your Concrete Mixer. When The Total Amount Reaches The Setting Value, The Controller Will Alarm..
Features
- Large LCD Screen & Monitor Flow Rate : Support reading with Liter or Gallon unit, LPM/GPM switchable. DFC15 will display the flow rate(the REAL-TIME volume of liquid which passes per minute), the flow total volume and sensed temperature clearly.
- Quantitative Control & Alarm Function : The controller will turn off the solenoid valve automatically when flow reach to the setting value you desire, it's easy to install and control. It can automatically stop water filling into your concrete mixer. When the total amount reaches the setting value, the controller will alarm.
- Work with All Hall Effect Flow Sensor : It can work with various different flow sensors through adjust the K value. High quality, come with temperature sensor, it can measure liquid temperature.
- Wide Applications : Swimming pool, water dispenser, coffee machine, drip irrigation system, beer brewing, etc. For example, if you want 5 liters of water, you can set up 5 liters of water on the DFC15 controller. When the water in the container reaches 5 liters, the controller will control the solenoid valve to close it, the water flow automatically stops, and you just get 5 liters of water. Please select a suitable flow meter. An oil flow meter is required for liquids other than water.
- Package Includes & Warranty : Thread type: BSP, but it can work with NPT thread. The controller will come with G1/2 flow sensor, G1/2 solenoid valve(N/C), temperature sensor(it can measure liquid temperature) and 12VDC power adapter. 12 month warranty!
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
See On Amazon #4
DIGITEN CF-B7ZJ SENSTREE G1/2 inch Male Thread Brass Water Flow Sensor, Hall Effect Sensor Switch Flow Meter Flowmeter Counter with Temperature Sensor 1-25L/min
Asin: B07QNMZ7ZK | Model: CF-B7ZJ | PartNumber: CF-B7ZJ | Ean: 0713458680907 | UPC: 713458680907
Features
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
See On Amazon #5
DIGITEN G1/2" Water Flow Sensor with 1.2M(3.9ft) Cable, Food-Grade Hall Effect Sensor Flow Meter Flowmeter Counter 1-30L/min - Arduino, Raspberry Pi, and Reverse Osmosis Filter Compatible
Asin: B07X3SB8KZ | Model: FL408-1ZJ | PartNumber: FL408-1ZJ | Ean: 0760385314269 | UPC: 760385314269
☺Hall Effect. Cable Length: 1.2M(3.9Ft). Flow Range:1-30L/Min, Working Voltage Range:Dc 5-18 V, Allow Compression:Water Pressure 1.75 Mpa Below..
☺Wide Application: It Is Mainly Used In Water Heater, Coffee Machine, Water Purifier, Drinking Fountain, Beverage Machine, Campus Smart Card Equipment, Etc..
☺Wire Connector Type: Sm2.54 3P. Connect To G1/2 Inch Bspt Male Thread, If Used For Npt, Need Thread Seal Tape. Output Waveform: Square Wave, Output Pulse Signal..
☺Material: All Materials Are In Line With Rohs Testing Standards, Can Be Used For Potable Water..
Features
- Work for Arduino, Raspberry Pi, and Reverse Osmosis Filter. Small size, waterproof, easy to install, heat resistance, pressure resistance, cold resistance.
- Material: all materials are in line with ROHS testing standards, can be used for potable water.
- Hall effect. Cable length: 1.2M(3.9ft). Flow range:1-30L/min, working voltage range:DC 5-18 V, allow compression:Water pressure 1.75 Mpa below.
- Wire connector type: SM2.54 3P. Connect to G1/2 inch BSPT male thread, if used for NPT, need thread seal tape. Output waveform: square wave, output pulse signal.
- Wide application: It is mainly used in water heater, coffee machine, water purifier, drinking fountain, beverage machine, campus smart card equipment, etc.
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
See On Amazon #6
DIGITEN G1/4" Water Flow Sensor, Food-Grade Hall Effect Sensor Flow Meter Flowmeter Counter Connect Hose 0.3-6L/min - Arduino, Raspberry Pi, and Reverse Osmosis Filter Compatible
Asin: B07QS17S6Q | Model: FL-S401AZJ | PartNumber: FL-S401AZJ | Ean: 0713458680877 | UPC: 713458680877
★Flow Range: 0.3-6L/Min, Working Voltage Range:Dc 5-18 V..
★Sensor: Hall Effect..
★Application: Water Heater Thermostat, Water Purifier, Boiler, Water Dispensers, Coffee Machines, Smart Card Equipment, The Boiler And So On..
★Suitable For 1/4" Tube. Small Size, Easy To Install, All Materials Are In Line With Rohs Testing Standards..
Features
- Waterproof, heat resistance, pressure resistance, cold resistance.
- Suitable for 1/4 tube. Small size, easy to install, all materials are in line with ROHS testing standards.
- Flow range: 0.3-6L/min, working voltage range:DC 5-18 V.
- Application: Water heater thermostat, water purifier, boiler, water dispensers, coffee machines, smart card equipment, the boiler and so on.
- Sensor: Hall effect.
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
See On Amazon #7
SENSTREE G1" Male Thread Brass Water Flow Sensor, Hall Effect Sensor Flow Meter Flowmeter Counter 2-50L/min
Asin: B07QLPBFZ3 | Model: 3923 | PartNumber: 3923 | Ean: 0713458680938 | UPC: 713458680938
Maximum Working Pressure: 1.75Mpa.
International Products Have Separate Terms, Are Sold From Abroad And May Differ From Local Products, Including Fit, Age Ratings, And Language Of Product, Labeling Or Instructions..
Flow Rate:2-50L/Min Operating Voltage Range: Dc 5-15V..
Features
- G1 inch male thread fits well on your water pipe. The flow meter can be used in a variety of instruments to measure fluid flow in pipes.
- Flow Rate:2-50L/min Operating Voltage Range: DC 5-15V.
- Maximum Working Pressure: 1.75Mpa
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
See On Amazon #8
DIGITEN G1/4" Quick Connect Hall Effect Sensor Water Flow Sensor Food-Grade Flowmeter Water Flow Counter Meter 0.3-10L/min - Arduino, Raspberry Pi, and Reverse Osmosis Filter Compatible
Asin: B07QRXLRTH | Model: FL-S402BZJ | PartNumber: FL-S402BZJ | Ean: 0713458680785 | UPC: 713458680785
★Flow Range:0.3-10L/Min, Working Voltage Range: Dc 5-18V..
★Sensor: Hall Effect. Application:Water Heater Thermostat, Water Purifier, Boiler, Water Dispensers, Coffee Machines, Smart Card Equipment, The Boiler And So On..
★Waterproof, Heat Resistance, Pressure Resistance, Cold Resistance..
★G1/4 Inch Quick-Connect: Easy Installation And Removal, Suitable For 1/4" Tube And Works With Most Reverse Osmosis Filtration Systems..
Features
- Food grade: Liquid passed through is safe to drink.
- G1/4 inch Quick-Connect: Easy installation and removal, suitable for 1/4 tube and works with most Reverse Osmosis filtration systems.
- Flow range:0.3-10L/min, working voltage range: DC 5-18V.
- Waterproof, heat resistance, pressure resistance, cold resistance.
- Sensor: Hall effect. Application:water heater thermostat, water purifier, boiler, water dispensers, coffee machines, smart card equipment, the boiler and so on.
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
See On Amazon #9
DIGITEN LCD Display Water Flow Control Meter Liquid Quantitative Controller + G1/2" Fuel Flow Meter Oil Flow Sensor Gasoline Diesel Milk Gear Meter
Asin: B07ZPQVZYF | Model: DFC15GF402ZJ | PartNumber: DFC15GF402ZJ | Ean: 0760385314368 | UPC: 760385314368
★【Work With All Hall Effect Flow Sensor】: It Can Work With Various Different Flow Sensors Through Adjust The K Value. Come With Temperature Sensor, It Can Measure Liquid Temperature..
★【Package Includes & Warranty】: Thread Type: Bsp, But It Can Work With Npt Thread. The Controller Will Come With G1/2" Gear Flow Meter, Temperature Sensor(It Can Measure Liquid Temperature) And 12Vdc Power Adapter. 12 Month Warranty!.
★【Wide Applications】: Swimming Pool, Water Dispenser, Coffee Machine, Drip Irrigation System, Beer Brewing, Etc. For Example, If You Want 5 Liters Of Water, You Can Set Up 5 Liters Of Water On The Dfc15 Controller. When The Water In The Container Reaches 5 Liters, The Controller Will Control The Solenoid Valve To Close It, The Water Flow Stops, And You Just Get 5 Liters Of Water. Please Select A Suitable Flow Meter..
★【Quantitative Control】: The Controller Will Turn Off The Solenoid Valve Automatically When Flow Reach To The Setting Value You Desire, It's Easy To Install And Control..
Features
- Large LCD Screen : Please note: The flowmeter that comes with the controller is only suitable for thick liquids, not for water. Support reading with Liter or Gallon unit, LPM/GPM switchable. DFC15 will display the flow rate(the REAL-TIME volume of liquid which passes per minute), the flow total volume and sensed temperature clearly.
- Quantitative Control : The controller will turn off the solenoid valve automatically when flow reach to the setting value you desire, it's easy to install and control.
- Work with All Hall Effect Flow Sensor : It can work with various different flow sensors through adjust the K value. Come with temperature sensor, it can measure liquid temperature.
- Wide Applications : Swimming Pool, water dispenser, coffee machine, drip irrigation system, beer brewing, etc. For example, if you want 5 liters of water, you can set up 5 liters of water on the DFC15 controller. When the water in the container reaches 5 liters, the controller will control the solenoid valve to close it, the water flow stops, and you just get 5 liters of water. Please select a suitable flow meter.
- Package Includes & Warranty : Thread type: BSP, but it can work with NPT thread. The controller will come with G1/2 gear flow meter, temperature sensor(it can measure liquid temperature) and 12VDC power adapter. 12 month warranty!
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
See On Amazon #10
DIGITEN Water Flow Sensor G1/2"Thread Female to Male, Hall Sensor Flow Meter Flowmeter Counter with Temperature Sensor 1-25L/min
Asin: B07QNN1N7W | Model: CF-B4ZJ | PartNumber: CF-B4ZJ | Ean: 0713458680891 | UPC: 713458680891
√ G Thread 1/2" Female To Male Thread To Fit On Your Water Pipe Well. The Flowmeter Can Be Used In A Wide Range Of Instruments To Measure The Flow Of Fluid In Pipes..
√ Max Working Pressure: 1.75Mpa..
√ Come With Temperature Sensor. Flow Range: 1-25L/Min. Working Voltage Range: Dc5-15V..
√ Waterproof, Heat Resistance, Pressurresistance, Cold Resistance, Small Size, Stable And Reliable. Easy To Install..
Features
- This flow sensor switch is made of brass, all materials are in line with ROHS testing standards.
- Waterproof, heat resistance, pressurresistance, cold resistance, small size, stable and reliable. Easy to install.
- G thread 1/2 female to male thread to fit on your water pipe well. The flowmeter can be used in a wide range of instruments to measure the flow of fluid in pipes.
- Come with temperature sensor. Flow range: 1-25L/min. Working Voltage Range: DC5-15V.
- Max working pressure: 1.75MPa.
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
See On Amazon #11
DIGITEN G1/2" Fuel Flow Meter, Oil Flow Sensor, Gasoline Diesel Milk Water Liquid Gear Counter
Asin: B07QNN9V3R | Model: GF-804MZJ | PartNumber: GF-804MZJ | Ean: 0604753637102 | UPC: 604753637102
★Power Requirement:3-12V Dc..
★Applications: Fuel, Oil, Gasoline, Diesel, Milk, Water Liquid, Thick Liquid, Etc..
★Accuracy:±0.5%..
★Flow Range:1-30L/Min..
Features
- G1/2" gear flow sensor. Wiring: Red---Power+;Black---GND; Yellow---Pulse singal
- Flow range:1-30L/min.
- Power requirement:3-12V DC.
- Accuracy: 0.5%.
- Applications: Fuel, oil, gasoline, diesel, milk, water liquid, thick liquid, etc.
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
See On Amazon #12
SENSTREE G1/2 Flow Hall Sensor BSP Thread, Food Grade POM 1-30L/Min Flow Meter, Food Grade Flowmeter Counter
Asin: B0CFX1TY27
☺Wire Connector Type: Sm-3P. Connect To G1/2 Inch Bsp Male Thread. Output Waveform: Square Wave, Output Pulse Signal..
☺Wide Application: It Is Mainly Used In Water Heater, Coffee Machine, Water Purifier, Drinking Fountain, Beverage Machine, Campus Smart Card Equipment, Etc..
☺Bsp Thread Flowmeter Can Work For Arduino, Raspberry Pi, And Reverse Osmosis Filter..
☺Hall Effect☺Flow Range:1-30L/Min, Working Voltage Range: Dc 5-18 V, Allow Compression: Water Pressure 1.75 Mpa Below..
Features
- BSP G1/2 Flow Hall Sensor Easy to install, heat resistance, pressure resistance, cold resistance.
- Hall effect Flow range:1-30L/min, working voltage range: DC 5-18 V, allow compression: Water pressure 1.75 Mpa below.
- Wire connector type: SM-3P. Connect to G1/2 inch BSP male thread. Output waveform: square wave, output pulse signal.
- BSP thread flowmeter can work for Arduino, Raspberry Pi, and Reverse Osmosis Filter.
- Wide application: It is mainly used in water heater, coffee machine, water purifier, drinking fountain, beverage machine, campus smart card equipment, etc.
- See more on Amazon...
Brand: SENSTREE | Manufacturer: SENSTREE
See On Amazon #13
DIGITEN G1/2" Water Electric Solenoid Valve Normally Closed N/C Water Inlet Flow Switch DC 12V
Asin: B07QQW9M7H | Model: VANC-408ZJ | PartNumber: VANC-408ZJ | Ean: 0713458680952 | UPC: 713458680952
★Working Pressure: 0.02-0.8Mpa..
★Temperature: 0-100℃. It Will Become Hot When It Works Because There Are So Many Coils Inside. It’S Normal And Safe Phenomenon..
★Working Voltage: Dc12v..
★G1/2",Thread Male Outer Diameter: 19Mm..
Features
- Operation mode:N/C,normally closed.
- G1/2,thread male outer diameter: 19mm.
- Working pressure: 0.02-0.8Mpa.
- Working Voltage: DC12V.
- Temperature: 0-100 . It will become hot when it works because there are so many coils inside. It s normal and safe phenomenon.
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
See On Amazon #14
SENSTREE G1/2 Flow Hall Sensor BSP Thread, 1-30L/Min Flow Meter, POM Material Flowmeter Counter
Asin: B0CQ4S4BV8
Wire Connector Type: Jst. Connect To G1/2 Inch Bsp Male Thread. Output Waveform: Square Wave, Output Pulse Signal..
Wide Application: It Is Mainly Used In Water Heater, Coffee Machine, Water Purifier, Drinking Fountain, Beverage Machine, Campus Smart Card Equipment, Etc..
Bsp Thread Flowmeter Can Work For Arduino, Raspberry Pi, And Reverse Osmosis Filter..
Hall Effect Sensor, Pulse Output. Flow Range:1-30L/Min, Working Voltage Range: Dc 5-18 V, Allow Compression: Water Pressure 1.75 Mpa Below..
Features
- Easy to install, heat resistance, pressure resistance, cold resistance. BSP G1/2 Flow Hall Sensor.
- Hall effect sensor, pulse output. Flow range:1-30L/min, working voltage range: DC 5-18 V, allow compression: Water pressure 1.75 Mpa below.
- Wire connector type: JST. Connect to G1/2 inch BSP male thread. Output waveform: square wave, output pulse signal.
- BSP thread flowmeter can work for Arduino, Raspberry Pi, and Reverse Osmosis Filter.
- Wide application: It is mainly used in water heater, coffee machine, water purifier, drinking fountain, beverage machine, campus smart card equipment, etc.
- See more on Amazon...
Brand: SENSTREE | Manufacturer: SENSTREE
See On Amazon
Looking For Something Else?
Search