SpeedFactory B/D/F/H 70mm Thermal Throttle Body Gasket
Asin: B0CCC6VKZX | Ean: 0634562800107 | UPC: 634562800107
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.High Conformability And Resilience Allowing The Gasket To Conform To Irregular, Rough, And Even Warped Mating Surfaces And Provide A Secure Seal, High Melting Temp(Over 500*F), Long Life, Doesnâ€T Dry Out, Get Brittle Or Crack, Unaffected By Petrochemicals.
Features
- The SpeedFactory Racing 70mm Thermal Throttle Body Gasket is designed to work with all common aftermarket cast 68-70mm throttle bodies. Want a bolt-on & go reusable thermal gasket solution that requires no tedious aligning ? This is it!
- High conformability and resilience allowing the gasket to conform to irregular, rough, and even warped mating surfaces and provide a secure seal, High melting temp(over 500*F), Long life, doesn t dry out, get brittle or crack, unaffected by petrochemicals
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 6.00 x 6.00 x 6.00 Inches | Weight: 1.00 pounds
See On Amazon Similar To SpeedFactory B D F H
#1
SpeedFactory MAP Sensor 4 BAR Compatible with Honda Acura B D F H Series - Black
Asin: B07C3212TT | Ean: 0689750106714 | UPC: 689750106714
Brand: Speedfactory Racing | Manufacturer: Speedfactory Racing
Dimensions: 3.50 x 7.00 x 4.50 inches
See On Amazon #2
SpeedFactory MAP Sensor 4 BAR B,D,F,H Series - Red
Asin: B0CC6VJXHM | Ean: 0634562799869 | UPC: 634562799869
40 To 260 Degrees Fahrenheit Temperature Operating Range, Able To Respond From 10% Of The Pressure Scale To 90% Of The Pressure Scale In .001 Seconds (The Fastest Response Time Of Any Map Sensor On The Market) Dimensionally Identical To Stock Map Sensor..
Features
- SpeedFactory 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.
- 40 to 260 degrees Fahrenheit temperature operating range, able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market) Dimensionally identical to stock MAP sensor.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 4.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #3
SpeedFactory MAP Sensor 4 BAR B,D,F,H Series - Black
Asin: B0CC6WYDYT | Ean: 0634562799876 | UPC: 634562799876
40 To 260 Degrees Fahrenheit Temperature Operating Range, Able To Respond From 10% Of The Pressure Scale To 90% Of The Pressure Scale In .001 Seconds (The Fastest Response Time Of Any Map Sensor On The Market) Dimensionally Identical To Stock Map Sensor..
Features
- SpeedFactory 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.
- 40 to 260 degrees Fahrenheit temperature operating range, able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market) Dimensionally identical to stock MAP sensor.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 4.00 x 4.00 Inches | Weight: 1.00 pounds
See On Amazon #4
SpeedFactory MAP Sensor 3 BAR B,D,F,H Series - Black
Asin: B0CC791PKH | Ean: 0634562799852 | UPC: 634562799852
Precisely Calculates Boost Pressure From 1-29+ Psi, 40 To 260 Degrees Fahrenheit Temperature Operating Range, Able To Respond From 10% Of The Pressure Scale To 90% Of The Pressure Scale In .001 Seconds (The Fastest Response Time Of Any Map Sensor On The Market)..
Features
- SpeedFactory 3 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.
- Precisely calculates boost pressure from 1-29+ psi, 40 to 260 degrees Fahrenheit temperature operating range, Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 4.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #5
SpeedFactory 5.5mm Viton Honda Exhaust Valve Stem Seal - Blue - Set of 8
Asin: B0CDP2KBVT | Ean: 0634562801968 | UPC: 634562801968
Provides Proper Valve Lubrication And Minimizes Valve Guide Wear While Keeping Oil Out Of The Combustion Chambers - Oem Fitss: B-Series Vtec, K-Series, D-Series, H/F-Series Vtec, And F20c/F22c Engines With 5.5Mm Valve Stems..
Features
- Our 5.5mm Viton valve stem seals are heat resistant to 400 F and are extremely resistant to even the most aggressive fuels, oils, and abrasion - providing superior sealing and maximum durability.
- Provides proper valve lubrication and minimizes valve guide wear while keeping oil out of the combustion chambers - OEM fitss: B-Series VTEC, K-Series, D-Series, H/F-Series VTEC, and F20C/F22C engines with 5.5mm valve stems.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 4.00 x 4.00 Inches | Weight: 1.00 pounds
See On Amazon #6
SpeedFactory Titanium Exhaust or Intake Manifold RAW Stud Kit - M8x1.25 - B,D,F,H,J Series Engines - Kit Includes 10pcs Nut, Stud and Washer
Asin: B0CD388Z9R | Model: 45mm (Standard Length) | PartNumber: 45mm (Standard Length) | Ean: 0634562800596 | UPC: 634562800596
(10) M8 X 1.25Mm X 45/55/65Mm Titanium Studs, (10) 12-Point M8x1.25Mm Titanium Nuts, (10) M8 Titanium Washers.
Features
- This stud kit looks great and will allow you to clamp your manifold to the cylinder head without sealing problems,stud/nut failure, or ugly and troublesome rust and corrosion. Titanium is ~45% lighter, stronger, and will not corrode like your stock steel bolts or studs.
- (10) M8 x 1.25mm x 45/55/65mm titanium studs, (10) 12-point M8x1.25mm titanium nuts, (10) M8 titanium washers
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 6.00 x 6.00 x 6.00 inches | Weight: 1.00 pounds
See On Amazon #7
SpeedFactory Stainless Steel Exhaust or Intake Manifold RAW Stud Kit - M8x1.25 - B,D,F,H,J Series Engines - Kit Includes 10pcs Nut, Stud and Washer
Asin: B0CD36P29W | Model: M8 | PartNumber: M8 | Ean: 0634562800671 | UPC: 634562800671
These Stud Kits Incorporate A Hex Key Tip That Allows Them To Be Easily Installed Using An Allen Wrench. Stainless 12-Point Nuts And Washers Are Included..
Features
- Our high quality stainless stud kits look great and allow you to properly clamp your intake or exhaust manifold to the cylinder head without experiencing sealing problems.
- These stud kits incorporate a hex key tip that allows them to be easily installed using an Allen wrench. Stainless 12-point nuts and washers are included.
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 6.00 x 6.00 x 6.00 Inches | Weight: 1.00 Pounds
See On Amazon #8
SpeedFactory B/D/F/H 70mm Cast Throttle Body - Includes 70mm Thermal Gasket
Asin: B0CDP5S75V | Model: 70mm | PartNumber: 70mm | Ean: 0634562801975 | UPC: 634562801975
Precision Machined Brass Throttle Plate, Fully Machined Tapered Bore, Dual Ball Bearings For Smooth Operation, Includes Both High Quality Composite 70Mm Throttle Body Gasket And Sfr Thermal Gasket, Reduced Heat Transfer From Thermal Gasket.
Features
- Introducing SpeedFactory Racing s precision cast 70mm Throttle Body for Honda B, D, F, and H series - bolt-on increased airflow, throttle response, and power gains on both naturally aspirated and forced induction applications
- Precision machined Brass Throttle Plate, Fully Machined Tapered Bore, Dual Ball Bearings for smooth operation, Includes BOTH high quality composite 70mm throttle body gasket and SFR Thermal Gasket, Reduced heat transfer from Thermal Gasket
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 7.00 x 7.00 Inches | Weight: 3.00 pounds
See On Amazon #9
SpeedFactory B/D/H/F-Series (Except S2000) Titanium Oil Pan Hardware Kit - RAW
Asin: B0CDP2L8M4 | Model: M6 20mm | PartNumber: M6 20mm | Ean: 0634562801463 | UPC: 634562801463
Kit Includes: X10 Speedfactory Titanium 6-Pt Flange Bolts €“ M6 X 1.0Mm X 20Mm, X9 Speedfactory Titanium 6-Pt Flange Nuts €“ M6 X 1.0Mm Verified Fitss: All D, B, H F Series Except S2000.
Features
- For people who care about the details upgrade to our all-new SpeedFactory Racing Titanium Oil Pan Hardware Kits!
- Kit Includes: X10 SpeedFactory Titanium 6-pt Flange Bolts M6 x 1.0mm x 20mm, X9 SpeedFactory Titanium 6-pt Flange Nuts M6 x 1.0mm Verified fitss: All D, B, H F series except s2000
- See more on Amazon...
Brand: Speedfactory Racing | Manufacturer: SpeedFactory Racing
Dimensions: 4.00 x 4.00 x 4.00 Inches | Weight: 1.00 pounds
See On Amazon
Looking For Something Else?
Search