KUNWU ER70S-6 Mild Steel TIG Welding Filler Rods 3/32" x 36" -1 Lbs and 2.0% Lanthanated (Blue, 10 Pack 3/32" EWLa20) Tungsten Set
Asin: B0CCF44BSY
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Because Of The Added Deoxidants, These Filler Metals Can Be Used For Welding Steels That Have A Rusty Or Dirty Surface.
The Ewla-2 Electrode Has The Highest Volume Of Oxides Of Any Of The Specific Single-Additive Aws-Specified Electrodes Types, Which Serves To Enhance Arc Starting And Stability, Reduce Tip Erosion Rate, And Extend Operating Current Range. Lanthanated Tungsten Electrodes Can Be Used For Both Dcen And Ac Applications..
500 Mpa Level Carbon Steel Filler Metal, Can Be Used In The Welding Of Carbon Steel And Low Alloy Steel In The Corresponding Strength Grade, Which Can Be Used In Engineering Machinery, Ship, Vehicle Manufacturing, Petrochemical And Other Industries.
Set Contains 1 Lb Er70s-6 Premium Carbon Steel Tig Welding Filler Rods 3/32" X 36" And 10 Pack Of Ewla20, 2% Lanthanated (Blue) 3/32" Tungsten Electrodes For Tig Welding.
Features
- Primarily used for single-pass welding of killed, semi-killed, and rimmed steels, frequently-used mild steel TIG welding filler rods
- Set contains 1 Lb ER70S-6 Premium Carbon Steel TIG Welding Filler Rods 3/32 x 36 and 10 pack of EWLa20, 2% Lanthanated (Blue) 3/32 Tungsten Electrodes for TIG Welding
- Because of the added deoxidants, these filler metals can be used for welding steels that have a rusty or dirty surface
- 500 MPa level carbon steel filler metal, can be used in the welding of carbon steel and low alloy steel in the corresponding strength grade, which can be used in engineering machinery, ship, vehicle manufacturing, petrochemical and other industries
- The EWLa-2 electrode has the highest volume of oxides of any of the specific single-additive AWS-specified electrodes types, which serves to enhance arc starting and stability, reduce tip erosion rate, and extend operating current range. Lanthanated tungsten electrodes can be used for both dcen and ac applications.
- See more on Amazon...
Brand: KUNWU
See On Amazon Similar To KUNWU ER70S6 Mild Steel TIG
#1
Blulu TIG Welding Rod ER70S-6 Mild Steel TIG Filler Rod Carbon Steel TIG Welding Rod 2lb (1/16" x 16")
Asin: B0CFFNLBJC
Reliable Material: Our Welding Tig Wire Is Made Of Er70s-6 Mild Steel, Reliable And Reusable, Safe And Sturdy, Allowing Welding With Ar And Co2 Mixed Gas Or With 100% Co2 As The Shielding Gas, You Can Use It With Confidence; Please Confirm The Size Before Placing An Order.
Wide Range Of Applications: These Tig Welding Accessories Are Practical And Useful, Which Can Be Applied For Construction Work, Engineering Machinery, Ships, Truck Bodies, Tanks And Other Industries.
Easy To Use: These Welding Tig Rods Can Be Applied In The Welding Of Low Carbon Steel And Low Alloy Steel, Leaving A Smooth Weld Bead Without Posting Weld Cleanup, Bringing Much Convenience To You.
Suitable Size: The Size Of The Tig Welding Equipment Is About 16 Inches In Length, Approx. 1/16 Inch In Diameter, Proper In Size And Light In Weight, Suitable Sized To Fit In Many Kinds Of Welding Machines, Convenient To Use; Please Confirm The Size Before Placing An Order.
Features
- Package Includes: the TIG welding rod is 2 lbs packed, enough to meet your needs and replacements, and you can also share some with your friends or family members
- Suitable Size: the size of the TIG welding equipment is about 16 inches in length, approx. 1/16 inch in diameter, proper in size and light in weight, suitable sized to fit in many kinds of welding machines, convenient to use; Please confirm the size before placing an order
- Reliable Material: our welding TIG wire is made of ER70S-6 mild steel, reliable and reusable, safe and sturdy, allowing welding with Ar and CO2 mixed gas or with 100% CO2 as the shielding gas, you can use it with confidence; Please confirm the size before placing an order
- Easy to Use: these welding TIG rods can be applied in the welding of low carbon steel and low alloy steel, leaving a smooth weld bead without posting weld cleanup, bringing much convenience to you
- Wide Range of Applications: these TIG welding accessories are practical and useful, which can be applied for construction work, engineering machinery, ships, truck bodies, tanks and other industries
- See more on Amazon...
Brand: Blulu | Manufacturer: Blulu
See On Amazon #2
YESWELDER Mild Steel TIG Welding Rod ER70S-6 1/8"x16" 5LB
Asin: B09YTKDQ6C | Model: ER70S-6-5LB-3.2 | PartNumber: ER70S-6-5LB-3.2
[Application] For A Variety Of Mild And Low Alloy Steel..
[Specification] Length：16''; Diameter: 1/8'' ; Weight:5 Pound Per Box..
[Multiple Usage] Great For Construction Work, Farm Implement Fabrication, Shaft Buildup, Tanks, Truck Bodies And General Shop Applications With Poor Fit-Up Or Rusty, Oily Plates..
[Shield Gas Required] Er70s-6 Has The Highest Combination Of Manganese And Silicon Deoxidizers, Permitting Higher Welding Currents With 100% Co2 Shielding Gas And Leaving A Smoother Weld Bead With Little To Zero Post-Weld Cleanup. And The Greater The Argon Content Of The Shielding Gas The Smoother The Bead Appearance With Less Spatter..
Features
- [ER70S-6] ER70S-6 is a gas shield copper coated carbon steel welding rod for fabrication of mild steel.
- [SHIELD GAS REQUIRED] ER70S-6 has the highest combination of manganese and silicon deoxidizers, permitting higher welding currents with 100% CO2 shielding gas and leaving a smoother weld bead with little to zero post-weld cleanup. And the greater the argon content of the shielding gas the smoother the bead appearance with less spatter.
- [APPLICATION] For a variety of mild and low alloy steel.
- [MULTIPLE USAGE] Great for construction work, farm implement fabrication, shaft buildup, tanks, truck bodies and general shop applications with poor fit-up or rusty, oily plates.
- [SPECIFICATION] Length 16''; Diameter: 1/8'' ; Weight:5 Pound per box.
- See more on Amazon...
Brand: YESWELDER | Manufacturer: YESWELDER
See On Amazon #3
KUNWU ER70S-6 1/16" x 36" -1 Lb Premium Mild Steel TIG Welding Filler Rods (1, 1/16" (1.6mm))
Asin: B09ZJ6JBL2 | Model: KB1RO06001 | PartNumber: KB1RO06001 | Ean: 6973979612861
500 Mpa Level Carbon Steel Filler Metal, Can Be Used In The Welding Of Carbon Steel And Low Alloy Steel In The Corresponding Strength Grade, Which Can Be Used In Engineering Machinery, Ship, Vehicle Manufacturing, Petrochemical And Other Industries.
Welding Positions: All Positions.
Please Note: Due To Long Term Inventory, Random Old Packaged Tube May Have Little Rust On Some Rods, Can Be Used For Sure After Sandpaper Sanding Before Use..
Straight Length Of 36 Inch Packaged In A Pvc Tube (Random Color), 1, 2, 5, 10 Lbs-Pack Can Be Shoosed.
Because Of The Added Deoxidants, These Filler Metals Can Be Used For Welding Steels That Have A Rusty Or Dirty Surface.
Features
- ER70S-6 1/16" x 36" -1 Lb packaged in tube, primarily used for single-pass welding of killed, semi-killed, and rimmed steels,
- Because of the added deoxidants, these filler metals can be used for welding steels that have a rusty or dirty surface
- 500 MPa level carbon steel filler metal, can be used in the welding of carbon steel and low alloy steel in the corresponding strength grade, which can be used in engineering machinery, ship, vehicle manufacturing, petrochemical and other industries
- Straight length of 36 inch packaged in a PVC tube (Random Color), 1, 2, 5, 10 Lbs-Pack can be shoosed
- Welding Positions: All Positions
- PLEASE NOTE: Due to Long term inventory, random old packaged tube may have little rust on some rods, can be used for sure after sandpaper sanding before use.
- See more on Amazon...
Brand: KUNWU | Manufacturer: Kunwu Advanced Materials
Dimensions: 0.10 x 36.00 x 0.10 inches | Weight: 1.00 Pounds
See On Amazon #4
TOOLIOM Mild Steel TIG Welding Rod ER70S-6 TIG Filler Rod 1/8" x 16" 5LB Welding Wire
Asin: B0BYJM7SL8 | Model: TL-ER70S-6-5LB-3.2 | PartNumber: TL-ER70S-6-5LB-3.2
Feature:Suitable For High Welding Currents.Stable Arc And Less Spatter..
Package Included:1/8" X 16" Carbon Mild Tig Welding Rod 5 Lbs Packed In A Plastic Case..
Wide Applications:Ideal For Welding Of Low Alloy Steel And Mild Steel.Used In Vehicles,Shipbuilding,Bridges,Automotive Components,Machine Engineering And More..
Size:1/8‘’(3.2Mm) In Diameter,16‘’(406.4Mm) In Length..
Features
- ER70S-6:Copper-coated mild steel TIG welding rod.Can be welded with Ar & CO2 mixed gas or with 100% CO2 as the shielding gas.
- SIZE:1/8 (3.2mm) in diameter,16 (406.4mm) in length.
- Feature:Suitable for high welding currents.Stable arc and less spatter.
- Wide applications:Ideal for welding of low alloy steel and mild steel.Used in vehicles,shipbuilding,bridges,automotive components,machine engineering and more.
- Package included:1/8 x 16 Carbon mild TIG welding rod 5 lbs packed in a plastic case.
- See more on Amazon...
Brand: TOOLIOM | Manufacturer: TOOLIOM
See On Amazon #5
2-LB ER70S2 1/16" 3/32" 1/8" premium carbon steel TIG welding rod (2-lb 1/16")
Asin: B07BS38BYB | Ean: 0689733277202 | UPC: 689733277202
Brand: HYW Products | Manufacturer: Not Available
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 11.00 Pounds
See On Amazon #6
KISWEL ER70S-6 Mild Steel TIG Welding Filler Rods 0.045" x 36" 2LBS
Asin: B08NF5PJF8 | Ean: 0741813860138 | UPC: 741813860138
Typical Applications: For Welding Of Structural Steels Machineries And Vehicles. Suitable For Single-Pass And Multi-Pass Welding, Repairs On A Variety Of Mild And Low Alloy Steel Such As Vehicles, Bridges, Construction And Mechanical Structures Etc., Small Diameter Pipe And Tubing, Sheet Metal Applications , Root Pass Pipe Welding..
2Lbs 0.045": 125 Rods..
Package : Shrink Wrapped And Shipping Box..
Specification: Aws A5.18/Asme Sfa A5.18 Er70s-6 0.045" X 36"(914Mm)..
Features
- Premium Quality KISWEL ER70S-6 Mild steel alloy TIG welding rods 0.045" x 36" 2LBS
- Specification: AWS A5.18/ASME SFA A5.18 ER70S-6 0.045 X 36(914mm).
- Typical Applications: For Welding of Structural Steels Machineries and Vehicles. Suitable for single-pass and multi-pass welding, Repairs on a variety of mild and low alloy steel such as vehicles, bridges, construction and mechanical structures etc., Small diameter pipe and tubing, Sheet metal applications , Root pass pipe welding.
- Package : Shrink Wrapped and Shipping Box.
- 2LBS 0.045: 125 Rods.
- See more on Amazon...
Brand: KISWEL | Manufacturer: KISWEL
See On Amazon #7
Blue Demon ER70S6 X 1/16" X 1LB Tube Carbon Steel TIG rod
Asin: B00F429Z7S | Model: ER70S6-063-01T | PartNumber: ER70S6-063-01T | Ean: 0652426702039 | UPC: 652426702039
Home Projects.
Steel Castings Or Forging Salvage.
Features
- General shop applications with poor fit-up
- Steel castings or forging salvage
- Home projects
- See more on Amazon...
Brand: Blue Demon | Manufacturer: Blue Demon
Dimensions: 1.00 x 38.00 x 1.00 Inches | Weight: 1.17 pounds
See On Amazon #8
KUNWU ER308L 1/8" x 18" x 1 Lb Economical Stainless Steel TIG welding Filler Rods Length 18" - 1 Lb Package (1 Lb TIG Rods, ER308L, 1/8")
Asin: B0CQKF98ML | Model: KB8KE04181 | PartNumber: KB8KE04181 | Ean: 6973979613608
Easily Use In Welding Of Kitchen, Furnace, Common Applications Include Stainless Steel Fabrication Of Dairy, Food Or Restaurant Equipment, Chemical Tanks And General Purpose Applications Where Corrosion Conditions Are Only A Moderate Concern, Suitable For Cryogenic Applications.
Vacuum Packing Is Only For Mild Steel Filler Rods Of Er70s-6.
Straight Length Of 18 Inch ( Normally Net Length Is Minimum 17.5 Inch ) Packaged In A Pvc Tube (Random Color).
Low Carbon Content (0.03 Percent Maximum) Increase Weld Metal Resistance To Intergranular Corrosion.
Features
- Usually welding of similar steels, especially for welding 19% chromium 9% nickel austenitic stainless steels such as 304L, 308L as well as stabilized grades 321 and 347
- Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion
- Easily use in welding of kitchen, furnace, common applications include stainless steel fabrication of dairy, food or restaurant equipment, chemical tanks and general purpose applications where corrosion conditions are only a moderate concern, suitable for cryogenic applications
- Straight length of 18 inch ( Normally net length is minimum 17.5 inch ) packaged in a PVC tube (Random Color)
- Vacuum packing is only for mild steel filler rods of ER70S-6
- See more on Amazon...
Brand: KUNWU | Manufacturer: Kunwu Advanced Materials
Dimensions: 1.60 x 17.80 x 1.60 Inches | Weight: 1.00 pounds
See On Amazon #9
Hot Max 24188 1/16-Inch ER70S-6 Mild Steel TIG Filler Rod, 1#
Asin: B00N2TSW10 | Model: 24188 | PartNumber: 24188 | Ean: 7535001732542, 0816002007387 | UPC: 816002007387
Highly Fluid.
1/16-Inch Tig Filler.
Highly Resistant To Corrosion.
Highly Durable.
Features
- For most types of mild steel
- Highly durable
- Highly fluid
- Highly resistant to corrosion
- 1/16-inch TIG filler
- See more on Amazon...
Brand: Hot Max Torches | Manufacturer: Hot Max
Dimensions: 1.00 x 37.25 x 1.00 Inches | Weight: 1.06 pounds
See On Amazon #10
KISWEL ER70S-6 Mild Steel TIG Welding Filler Rods 0.045" x 36" 5LBS
Asin: B08NF57ZND | Ean: 0741813860121 | UPC: 741813860121
For Welding Of Structural Steels Machineries And Vehicles.Suitable For Single-Pass And Multi-Pass Welding, Repairs On A Variety Of Mild And Low Alloy Steel Such As Vehicles, Bridges, Construction And Mechanical Structures Etc., Small Diameter Pipe And Tubing, Sheet Metal Applications, Root Pass Pipe Welding..
5Lbs 0.045": 313 Rods.
Specification: Aws A5.18/Asme Sfa A5.18 Er70s-6 0.045" X 36" (914Mm) Length Of Rod With Both Ends Stamped..
Package : Plastic Tube (Same As Picture) And Shipping Box..
Features
- Premium Quality KISWEL ER70S-6 Mild steel alloy TIG welding rod 0.045" x 36" 5LBS
- Package : Plastic tube (SAME AS PICTURE) and Shipping Box.
- For Welding of Structural Steels Machineries and Vehicles.Suitable for single-pass and multi-pass welding, Repairs on a variety of mild and low alloy steel such as vehicles, bridges, construction and mechanical structures etc., small diameter pipe and tubing, Sheet metal applications, Root pass pipe welding.
- Specification: AWS A5.18/ASME SFA A5.18 ER70S-6 0.045 x 36 (914mm) length of rod with both ends stamped.
- 5LBS 0.045: 313 Rods
- See more on Amazon...
Brand: KISWEL | Manufacturer: KISWEL
See On Amazon #11
KUNWU ER70S-6 Mild Steel MIG Welding Wire .040 Inch - 2 Lb x 1 Pack Carbon Steel Solid 4" Spools (0.040 Inch (1.0mm), 2 Lb.)
Asin: B0BQJ1J89Q | Model: KB1RL06034-58 | PartNumber: KB1RL06034-58
These Electrodes Permit The Use Of Higher Current Ranges With Either Co2 (Aws A5.32 Class Sg-C) Shielding Gas Or With Mixtures Of Argon And Oxygen (Aws A5.32 Class Sg-Ao-X) Or Argon And Carbon Dioxide (Aws A5.32 Class Sg-Ac-Y).
Typical Base Metal Specifications Are Often The Same As Those For The Er70s-2 [Er48s-2] Classification.
However, These Electrodes Do Require A Higher Level Of Oxidation Than The Previously Described Electrodes When Using Either Binary Or Ternary Argon Shielding Gas Mixtures Per The Awsa5.32 Specification.
Intended For Both Single- And Multiple-Pass Welding, Especially Suited For Sheet Metal Applications, Where Smooth Weld Beads Are Desired, And Structural And Plate Steels That Have Moderate Amounts Of Rust Or Mill Scale.
Features
- Applicable to both .035" or 040" of 4" welding spools, Copper coated sealed up to prevent oxidation, will never affect the quality of welding
- Intended for both single- and multiple-pass welding, especially suited for sheet metal applications, where smooth weld beads are desired, and structural and plate steels that have moderate amounts of rust or mill scale
- These electrodes permit the use of higher current ranges with either CO2 (AWS A5.32 Class SG-C) shielding gas or with mixtures of argon and oxygen (AWS A5.32 Class SG-AO-X) or argon and carbon dioxide (AWS A5.32 Class SG-AC-Y)
- However, these electrodes do require a higher level of oxidation than the previously described electrodes when using either binary or ternary argon shielding gas mixtures per the AWSA5.32 specification
- Typical base metal specifications are often the same as those for the ER70S-2 [ER48S-2] classification
- See more on Amazon...
Brand: KUNWU | Manufacturer: Kunwu Advanced Materials
Dimensions: 1.80 x 4.00 x 4.00 inches | Weight: 2.00 pounds
See On Amazon #12
ER70S-6 0.045" - 1/16" - 3/32" - 1/8" X 36" Tig Welding Wire Rod 10 lb (1/16")
Asin: B075LWKVRJ | Ean: 0600137573189 | UPC: 600137573189
Brand: HYWELD | Manufacturer: HYWELD
Dimensions: 3.00 x 37.00 x 3.00 inches | Weight: 11.00 Pounds
See On Amazon #13
WeldingCity 5-Lb Mild Steel ER70S-6 TIG Welding Rods 3/32"x36"
Asin: B00UES5JQS | Ean: 0799491551824 | UPC: 799491551824
Features: Er70s-6 Is A General Purpose Welding Wire For Fabrication Of Mild Steel Which Contains Higher Levels Of Manganese And Silicon To Produce High Quality Welds When Used On Dirty, Oily, Or Rusty Steel For Tig Welding (Gtaw) Process. The Deoxidizers Also Provide Better Wetting, A Flatter Bead Shape And The Capability Of Faster Travel Speeds, As Well As Better Fluidity Of The Weld Pool, Thus Creating A Smoother Bead Appearance And Resulting In Minimal Post-Weld Grinding..
U.S. Based Welding And Hardware Supplier. Strong Technical Support With Experienced Customer Service To Address Buyer's Any Question..
Typical Applications: Repairs On A Variety Of Mild And Low Alloy Steel; Small Diameter Pipe And Tubing; Sheet Metal Applications; Root Pass Pipe Welding..
Specification: Conformed To Aws A5.18/Asme Sfa A5.18/Er70s-6; 36" (914Mm) Long Welding Rods With Single End Stamped. Shielding Gas: Argon/Co2..
Features
- Premium quality ER70S-6 mild steel alloy copper coated TIG welding rods; diameter 0.045", 1/16", 3/32" and 1/8" with 36" length. Package of 5-Lb and 10-Lb.
- Specification: conformed to AWS A5.18/ASME SFA A5.18/ER70S-6; 36 (914mm) long welding rods with single end stamped. Shielding Gas: Argon/CO2.
- Features: ER70S-6 is a general purpose welding wire for fabrication of mild steel which contains higher levels of manganese and silicon to produce high quality welds when used on dirty, oily, or rusty steel for TIG welding (GTAW) process. The deoxidizers also provide better wetting, a flatter bead shape and the capability of faster travel speeds, as well as better fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post-weld grinding.
- Typical Applications: repairs on a variety of mild and low alloy steel; small diameter pipe and tubing; sheet metal applications; root pass pipe welding.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
- See more on Amazon...
Brand: WeldingCity | Manufacturer: WeldingCity
Dimensions: 3.00 x 36.00 x 3.00 Inches | Weight: 5.00 pounds
See On Amazon #14
Weldcote Metals ER70S-6 1/16 X 36" Tig Welding Rod 10 Lbs.
Asin: B075DGF1YW | Ean: 0877511001952 | UPC: 877511001952
Brand: Weldcote Metals | Manufacturer: Weldcote Metals
Dimensions: 2.00 x 36.00 x 2.00 inches | Weight: 0.00 pounds
See On Amazon #15
WeldingCity 5-Lb ER70S-2 Mild Carbon Steel TIG Welding Rods 1/16"x36"
Asin: B00UES5FX0 | Ean: 0799491551787 | UPC: 799491551787
Features And Applications: Er70s-2 Is A Triple Deoxidized Wire Which Provides High Quality And Defect Free Weld Deposits When Properly Used On Most Carbon Steels For Tig Welding (Gtaw) Process. All Position Welding. Typical Applications: Repairs On A Variety Of Mild And Low Alloy Steel; Small Diameter Pipe And Tubing; Sheet Metal Applications; Root Pass Pipe Welding, Etc..
U.S. Based Welding And Hardware Supplier. Strong Technical Support With Experienced Customer Service To Address Buyer's Any Question..
Package Of 5-Lb And 10-Lb Er70s-2 Tig Welding Rods; Diameter Available: 0.045" (1.2Mm), 1/16" (1.6Mm), 3/32" (2.4Mm) And 1/8" (3.2Mm)..
Specification: Conformed To Aws A5.18/Asme Sfa A5.18/Er70s-2; 36" (914Mm) Long Welding Rods With Single End Stamped. Shielding Gas: Argon/Co2..
Features
- Premium quality ER70S-2 mild carbon steel alloy copper coated TIG welding rods; diameter 0.045", 1/16", 3/32" and 1/8" with 36" length.
- Specification: conformed to AWS A5.18/ASME SFA A5.18/ER70S-2; 36 (914mm) long welding rods with single end stamped. Shielding Gas: Argon/CO2.
- Features and Applications: ER70S-2 is a triple deoxidized wire which provides high quality and defect free weld deposits when properly used on most carbon steels for TIG welding (GTAW) process. All position welding. Typical applications: repairs on a variety of mild and low alloy steel; small diameter pipe and tubing; sheet metal applications; root pass pipe welding, etc.
- Package of 5-Lb and 10-Lb ER70S-2 TIG welding rods; diameter available: 0.045 (1.2mm), 1/16 (1.6mm), 3/32 (2.4mm) and 1/8 (3.2mm).
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
- See more on Amazon...
Brand: WeldingCity | Manufacturer: WeldingCity.com
Dimensions: 3.00 x 36.00 x 3.00 inches | Weight: 5.00 Pounds
See On Amazon #16
KUNWU Stainless Steel TIG Welding Rods ER309L 1/16" x 36" (5 Lb) Used to Weld Type 304 and Similar or Dissimilar Base Metals
Asin: B08F5FXHZN | Model: KB8000400FA | PartNumber: KB8000400FA | Ean: 0745895378833 | UPC: 745895378833
Low Carbon Content (0.03 Percent Maximum) Increase Weld Metal Resistance To Intergranular Corrosion.
Straight Length Of 36 Inch Packaged In A Pvc Tube (Random Color).
Easily Use In Welding Of Kitchen, Food Equipment, Furnace, Motorbike And Exhaust System.
Also Used In Dissimilar Metal Welds, Welding Of Dissimilar Steels Or Overlaying Unalloyed Structural Steels.
Features
- Occasionally used to weld Type 304 and similar base metals where severe corrosion conditions exist requiring higher alloy weld metal
- Also used in dissimilar metal welds, welding of dissimilar steels or overlaying unalloyed structural steels
- Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion
- Easily use in welding of kitchen, food equipment, furnace, motorbike and exhaust system
- Straight length of 36 inch packaged in a PVC tube (random color)
- See more on Amazon...
Brand: KUNWU | Manufacturer: Kunwu Advanced Mateials
Dimensions: 0.10 x 36.00 x 0.10 Inches | Weight: 5.00 pounds
See On Amazon #17
ER70S-2 Mild Steel TIG Welding Filler Rod 1/16" x 36" 10LBS
Asin: B092YWGHNS
Specification: Aws A5.18/Asme Sfa A5.18 Er70s-2 1/16"X 36" (914Mm) Long Rods With Both End Stamped..
Made In Korea.
Features: For Mild Steel Welding Of Pipes, Offshore Drilling Rigs And Structural Steel. Minimal Contamination Of Wire Surface During Manufacturing Process Precise Control Of Wire Chemistry, Excellent Welding Characteristics. Consistent Weld Deposit Chemistry And Procedures From Package To Package Improve Quality And Save Time. Clean Welds, Minimal "Smut". Great Puddle Control..
Package: Plastic Tube (Same As Picture) And Shipping Box..
Features
- Premium Quality ER 70S-2 Mild Steel TIG Welding Filler Rod 1/16"x 36" 10LBS.
- Package: Plastic tube (SAME AS PICTURE) and Shipping Box.
- Specification: AWS A5.18/ASME SFA A5.18 ER70S-2 1/16x 36 (914mm) long rods with Both end stamped.
- Features: For Mild Steel Welding of Pipes, offshore drilling rigs and structural steel. Minimal contamination of wire surface during manufacturing process Precise control of wire chemistry, Excellent welding characteristics. Consistent weld deposit chemistry and procedures from package to package improve quality and save time. Clean welds, minimal smut. Great puddle control.
- MADE IN KOREA
- See more on Amazon...
Brand: Generic | Manufacturer: WELDER'S CHOICE
See On Amazon #18
Hicarer 11LB TIG Welding Filler Rod, Length 39.4" Durable TIG Welding Rod, Wilding Equipment (1/16" Diameter,ER70S-6 Mild Steel)
Asin: B0C7QZ1G8W
Nice Performance: Tig Welding Rods Use Manganese And Silicone Deoxidizers That Allow For Higher Welding Currents, Enabling Welding Workers To Form Strong Welds That Are Not Prone To Cracking; Nice Welding Properties Make It The Ideal Choice For Welding Worker.
Versatile Functions: The Tig Filler Rod Is Suitable For Welding Of Low Alloy Steel And Low Carbon Steel; It Is Applied In Vehicles, Shipbuilding, Bridges, Auto Parts, Mechanical Engineering, Etc.; It Is Ideal For The Construction Of Poorly Assembled Or Rusty, Greasy Plates, Farm Tools Manufacturing, Shafts, Fuel Tanks, Truck Bodies And General Workshop Applications.
Large Packaging For Using: Our Stick Welding Rods Are Extended Design To Meet Your Different Welding Needs, And 11Lb In Weight, Large Quantity Can Satisfy Your Daily Using And Decoration Demands.
Protective Gas Required: Our Tig Welding Rod Can Require 100% Co2 Shielding Gas Because It Leaves A Smoother Weld, Minimizing Post Weld Cleanup; The High Amount Of Argon In The Shielding Gas Ensures A Smoother Bead Appearance With Less Splash; This Gas Has High Thermal Conductivity And Provides A Stable And Narrow Welding Arc.
Features
- ER70S-6: our welding rod is a kind of low carbon steel gas welding protection copper coated carbon steel electrode; Extensive quality testing ensures that each argon arc electrode forms a fault free weld, giving you peace of mind; Our rods always form strong welds that stand the test of time, and you can use with confidence
- Protective Gas Required: our TIG welding rod can require 100% CO2 shielding gas because it leaves a smoother weld, minimizing post weld cleanup; The high amount of argon in the shielding gas ensures a smoother bead appearance with less splash; This gas has high thermal conductivity and provides a stable and narrow welding arc
- Nice Performance: TIG welding rods use manganese and silicone deoxidizers that allow for higher welding currents, enabling welding workers to form strong welds that are not prone to cracking; Nice welding properties make it the ideal choice for welding worker
- Large Packaging for Using: our stick welding rods are extended design to meet your different welding needs, and 11LB in weight, large quantity can satisfy your daily using and decoration demands
- Versatile Functions: the TIG filler rod is suitable for welding of low alloy steel and low carbon steel; It is applied in vehicles, shipbuilding, bridges, auto parts, mechanical engineering, etc.; It is ideal for the construction of poorly assembled or rusty, greasy plates, farm tools manufacturing, shafts, fuel tanks, truck bodies and general workshop applications
- See more on Amazon...
Brand: Hicarer | Manufacturer: Hicarer
See On Amazon #19
ER70s-6 Tig Rod 5 lbs 1/16-3/32-1/8 5# (1/8" 5 lbs)
Asin: B07MXQQ8D4 | Ean: 0048944592021 | UPC: 048944592021
Weight: 5 Lb.
Brand: Hy-weld | Manufacturer: Unknown
See On Amazon #20
KUNWU Stainless Steel TIG Welding Rods ER316L 1/16" x 36" 5Lb (5, 1/16 inch (0.063 inch), 1.6 mm)
Asin: B08F71NHLZ | Model: KB8KT04023 | PartNumber: KB8KT04023
Er316l Is Usually Used To 18% Chromium – 12% Nickel – 2.5% Molybdenum Austenitic Stainless Steels Such As 316 And 317 But With A Low Ferrite, It Can Also Be Used For Welding 304/304L To 316/316L Stainless Steels In Cryogenic Service At Temperatures Down To -452 ℉ (-269 ℃)..
Welding Positions: All Positions..
Primarily Used For Welding Low-Carbon Molybdenum-Bearing Austenitic Alloys. Common Applications Include Equipment That Manufacturers Rayon, Dye, Paper, Ink, Rubber, Bleach, Photographic Chemicals And On The Sealing Faces Of Valves And Fittings For Acid, Gas, Water And Steam Equipment..
The 2.5 % Molybdenum Content Of 316L Gives The Weld Deposit Excellent Corrosion Resistance At Elevated Temperatures Against “Pitting” That May Be Caused By Sulfuric, Phosphoric And Acetic Acids..
Features
- Low carbon (0.03 % maximum) in this filler metal reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium.
- The 2.5 % molybdenum content of 316L gives the weld deposit excellent corrosion resistance at elevated temperatures against pitting that may be caused by sulfuric, phosphoric and acetic acids.
- ER316L is usually used to 18% chromium 12% nickel 2.5% molybdenum austenitic stainless steels such as 316 and 317 but with a low ferrite, it can also be used for welding 304/304L to 316/316L stainless steels in cryogenic service at temperatures down to -452 (-269 ).
- Primarily used for welding low-carbon molybdenum-bearing austenitic alloys. Common applications include equipment that manufacturers rayon, dye, paper, ink, rubber, bleach, photographic chemicals and on the sealing faces of valves and fittings for acid, gas, water and steam equipment.
- Welding Positions: All Positions.
- See more on Amazon...
Brand: KUNWU | Manufacturer: Kunwu Advanced Materials
Dimensions: 0.06 x 36.00 x 0.06 Inches | Weight: 5.00 pounds
See On Amazon
Looking For Something Else?
Search