Boost MPPT Solar Controller 600W 48V 60V 72V Digital Display IP54 Waterproof Solar Battery Panel Regulator
Asin: B0CCVXZY6X | Model: WALFRONTg5vmug8poz | PartNumber: WALFRONTg5vmug8poz
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Energy Saving: Solar Panel Power Technology, Low Standby Power Consumption, System Power Consumption Is All From The Panel, Does Not Work At Night..
Applicable Battery: Used For Lithium Battery, Lithium Iron Battery, Acid Battery, Etc. (Battery Voltage 48V 60V 72V), Users Can Set Parameters Through The Set Key..
Safe Operation: Equipped With A Child Lock Function To Prevent Wrong Charging Caused By Touching The Button By Mistake And Provide Good Protection..
Digital Display: 4 Digit Digital Tube Display Design, Real Time Display Of Battery Panel Voltage, Charging Current, Battery Voltage, Etc., Clear And Intuitive..
Features
- MPPT Technology: Advanced MPPT power point tracking technology, with maximum tracking efficiency of 98%, effectively saving battery panel energy.
- Digital Display: 4 digit digital tube display design, real time display of battery panel voltage, charging current, battery voltage, etc., clear and intuitive.
- Energy Saving: Solar panel power technology, low standby power consumption, system power consumption is all from the panel, does not work at night.
- Safe Operation: Equipped with a child lock function to prevent wrong charging caused by touching the button by mistake and provide good protection.
- Applicable Battery: Used for lithium battery, lithium iron battery, acid battery, etc. (battery voltage 48V 60V 72V), users can set parameters through the SET key.
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon Similar To Boost MPPT Solar Controller 600W
#1
BLUETTI Portable Power Station AC180, 1152Wh LiFePO4 Battery Backup w/ 4 1800W (2700W peak) AC Outlets, 0-80% in 45 Min., Solar Generator for Camping, Off-grid, Power Outage
Asin: B0C1SMJTDT | Model: AC180 | PartNumber: AC180
[Solar Fast Charge] - Built-In Mppt Charge Controller For Up To 500W Solar Input. Fully Charge Ac180 Solar Generator In 2.8-3.3 Hours With Clean, Environmentally Friendly, Renewable Solar Energy..
[What You Get] - Bluetti Ac180 Portable Power Station, Ac Charging Cable, Car Charging Cable, Solar Charging Cable, User Manual, 5-Year Warranty And Friendly Customer Service..
[Reliable Ups] - More Than An Outdoor Power Source, The Ac180 Can Also Be Used As A Rugged Home Battery Backup - Providing Emergency Power To Your Essentials In 20 Ms..
[Power All Your Needs] - The Ac180 Boasts 1800W Output And 11 Outlets To Handle Almost Anything You Plug In. With A Tap On The Bluetti App, You Can Give It A Boost To 2700W For Your Higher Needs..
Features
- [Charged in 1 Hour] - The AC180 packs a 1152Wh LiFePO4 battery, which can be fully charged in just 1 hour at 1440W AC input - always ready to go when you need it.
- [Power All Your Needs] - The AC180 boasts 1800W output and 11 outlets to handle almost anything you plug in. With a tap on the BLUETTI App, you can give it a boost to 2700W for your higher needs.
- [Solar Fast Charge] - Built-in MPPT charge controller for up to 500W solar input. Fully charge AC180 solar generator in 2.8-3.3 hours with clean, environmentally friendly, renewable solar energy.
- [Reliable UPS] - More than an outdoor power source, the AC180 can also be used as a rugged home battery backup - providing emergency power to your essentials in 20 ms.
- [What You Get] - BLUETTI AC180 portable power station, AC charging cable, car charging cable, solar charging cable, user manual, 5-year warranty and friendly customer service.
- See more on Amazon...
Brand: BLUETTI | Manufacturer: BLUETTI
Dimensions: 12.48 x 13.39 x 9.72 inches | Weight: 37.40 pounds
Warranty: 5-Year Warranty
See On Amazon #2
Renogy 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Compact Design w/LCD Display for AGM, Gel, Flooded and Lithium Battery, Wanderer 10A
Asin: B07NPDWZJ7 | Model: Wanderer 10 Amp 12V/24V | PartNumber: Wanderer 10 Amp 12V/24V | Ean: 0816360029953 | UPC: 816360029953
【Multiple Types Of Charging Ports】 Integrated With 5V 2A Usb Ports, Allowing You To Conveniently Charge Your Phones, Tablets, And Other Usb-Powered Devices Directly From The Controller Without The Need For An Additional Power Source Or Adapter. With A Variety Of Charging Options, This Charge Controller Is Perfect For Those Who Need Flexibility In Their Charging Solutions..
【Extremely Low Self-Consumption】 Boasts An Extremely Low Self-Consumption Feature, Making It An Energy-Efficient And Practical Solution For Off-Grid Power Systems. With Its Low Self-Consumption Rate, The Charge Controller Consumes Minimal Power From The Battery, Allowing You To Maximize The Efficiency And Lifespan Of Your Power System..
【Real-Time Monitoring】 The Integrated Rs232 Port Works Perfectly With The Bt-1 Bluetooth Module To Deliver Real-Time Energy Data Across The Dc Home Smart Phone App & Renogy One M1, Your All-In-One Energy Monitoring And Off-Grid Smart Living Center..
【Diverse Load Control】 Multiple Load Control Modes Provide Unparalleled Flexibility And Maximum Efficiency When It Comes To Managing Your Energy Usage. Wanderer 10 Can Adapt To Your Specific Load Requirements By Set Up Parameters Directly From The Controller..
【Full System Protection】 Designed To Safeguard Your Solar System. It Provides A Comprehensive And Reliable Safeguard For Your Equipment And Devices Protection For Overcharging, Over-Discharging, Short-Circuit, Overload, Reverse Polarity, Reverse Current, And Temperature Compensation, Keeping Your Devices And Systems Running Smoothly And Safely..
Features
- 12V/24V Automatically Detect Automatically detects the voltage of the battery system (for non-lithium batteries) and adjusts the charging parameters accordingly, ensuring that the battery is charged safely and efficiently.
- Full System Protection Designed to safeguard your solar system. It provides a comprehensive and reliable safeguard for your equipment and devices protection for overcharging, over-discharging, short-circuit, overload, reverse polarity, reverse current, and temperature compensation, keeping your devices and systems running smoothly and safely.
- Multiple Types of Charging Ports Integrated with 5V 2A USB ports, allowing you to conveniently charge your phones, tablets, and other USB-powered devices directly from the controller without the need for an additional power source or adapter. With a variety of charging options, this charge controller is perfect for those who need flexibility in their charging solutions.
- Diverse Load Control Multiple load control modes provide unparalleled flexibility and maximum efficiency when it comes to managing your energy usage. Wanderer 10 can adapt to your specific load requirements by set up parameters directly from the controller.
- Extremely Low Self-Consumption Boasts an extremely low self-consumption feature, making it an energy-efficient and practical solution for off-grid power systems. With its low self-consumption rate, the charge controller consumes minimal power from the battery, allowing you to maximize the efficiency and lifespan of your power system.
- Real-time Monitoring The integrated RS232 port works perfectly with the BT-1 Bluetooth module to deliver real-time energy data across the DC Home smart phone app & Renogy ONE M1, your all-in-one energy monitoring and off-grid smart living center.
- See more on Amazon...
First Available: 04/30/2018
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.10 x 4.70 x 3.00 Inches | Weight: 0.27 Pounds
Warranty: 1-year material warranty
See On Amazon #3
Victron Energy SmartSolar MPPT 100V 30 amp 12/24-Volt Solar Charge Controller (Bluetooth)
Asin: B073ZJ3L13 | Model: SCC110030210 | PartNumber: SCC110030210 | Ean: 8719076040170, 8380000025886
Thanks To The Victron Energy Mppt Technology, Every Single Drop Of Power Available Is Squeezed Out Of Your Solar Panels And Stored, Guaranteeing An Efficient Energy Collection..
Easily Program The Charger For Your Battery Type Using 'Presets' For Common Battery Types Or By Creating Your Own 100% Customized Settings..
Connectivity - With The Built-In Bluetooth Feature, You Can Wirelessly Monitor And Control Your Mppt With The Victron Connect App. Or, Connect To A Victron Energy Gx Device With A Ve.Direct Cable (Sold Separately) And Monitor From Anywhere In The World Using Vrm!.
With The Latest And Fastest Technology, This Mppt Charge Controller Maximizes Energy-Harvest From Your Solar Panels, Intelligently Driving It To Achieve Full Charge In The Shortest Possible Time. It Even Has The Power To Recharge Severely Depleted Batteries From 0 Volts.
Features
- Are you ready to take your solar energy game to the next level? Using a multi-stage, adaptive charging algorithm, the Victron Energy SmartSolar MPPT 100-Volt 30 amp is the ultimate solar charger for your batteries
- With the latest and fastest technology, this MPPT charge controller maximizes energy-harvest from your solar panels, intelligently driving it to achieve full charge in the shortest possible time. It even has the power to recharge severely depleted batteries from 0 volts
- Thanks to the Victron Energy MPPT technology, every single drop of power available is squeezed out of your solar panels and stored, guaranteeing an efficient energy collection.
- Connectivity - with the built-in Bluetooth feature, you can wirelessly monitor and control your MPPT with the Victron Connect app. Or, connect to a Victron Energy GX device with a VE.Direct cable (sold separately) and monitor from anywhere in the world using VRM!
- Easily program the charger for your battery type using 'presets' for common battery types or by creating your own 100% customized settings.
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 2.76 x 5.12 x 7.48 inches | Weight: 2.82 pounds
Warranty: 2 year manufacturer
See On Amazon #4
Victron Energy SmartSolar MPPT 75V 15 amp 12/24-Volt Solar Charge Controller (Bluetooth)
Asin: B075NQQRPD | Model: MPPT 75|15 | PartNumber: MPPT 75|15 | Ean: 8719076040804, 0703774384979, 5060297345142 | UPC: 703774384979
Easily Program The Charger For Any Battery Type Using 'Presets' For Common Battery Types Or By Creating Your Own 100% Customized Settings..
The Intelligent Load Output Function Is A Game-Changer, Preventing Damage Caused By Running Batteries 'Flat.' You Can Configure The Voltage At Which The Victron Energy Smartsolar Disconnects A Load, Preventing Excessive Drain On Your Batteries..
Connectivity - With The Built-In Bluetooth Feature, You Can Wirelessly Monitor And Control Your Mppt With The Victron Connect App. Or, Connect To A Victron Energy Gx Device With A Ve.Direct Cable (Sold Separately) And Monitor From Anywhere In The World Using Vrm!.
With The Latest And Fastest Technology, This Mppt Charge Controller Maximizes Energy-Harvest From Your Solar Panels, Intelligently Driving It To Achieve Full Charge In The Shortest Possible Time. It Even Has The Power To Recharge Severely Depleted Batteries From 0 Volts.
Features
- Are you ready to take your solar energy game to the next level? Using a multi-stage, adaptive charging algorithm, the Victron Energy SmartSolar MPPT 75-Volt 15 amp is the ultimate solar charger for your batteries
- With the latest and fastest technology, this MPPT charge controller maximizes energy-harvest from your solar panels, intelligently driving it to achieve full charge in the shortest possible time. It even has the power to recharge severely depleted batteries from 0 volts
- Easily program the charger for any battery type using 'presets' for common battery types or by creating your own 100% customized settings.
- Connectivity - with the built-in Bluetooth feature, you can wirelessly monitor and control your MPPT with the Victron Connect app. Or, connect to a Victron Energy GX device with a VE.Direct cable (sold separately) and monitor from anywhere in the world using VRM!
- The intelligent Load output function is a game-changer, preventing damage caused by running batteries 'flat.' You can configure the voltage at which the Victron Energy SmartSolar disconnects a load, preventing excessive drain on your batteries.
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.97 x 8.27 x 5.91 Inches | Weight: 1.17 pounds
Warranty: Warranty
See On Amazon #5
[Upgraded] 30A Solar Charge Controller, Black Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display (30a)
Asin: B08L8TBCK6 | Ean: 0713484981214 | UPC: 713484981214
Please Note: The Charge Regulator Is Only Suitable For Lead-Acid Batteries: Open, Agm, Gel. Do Not Support Any Other Batteries. The Solar Controller Will Turn Off Automatically To Protect The Lifespan Of Your Battery If The Voltage Of The Battery Drop Below 8V..
Warranty: 12-Month Warranty And Lifetime Technique Support. If There Is Any Problem, Please Contact Us Through Amazon Email, We Will Arrange A Refund Or A Replacement..
Lcd Display: Let You Know The Status And Data With Lcd Display. You Can Also Switch Modes And Parameter Configuration Conveniently And Can Use This Controller In A Different Place Like Home, Industrial, Commercial, Etc..
Safe To Use: Equipped With Overcurrent Protection, Short-Circuit Protection, Inverse Connection Protection, Low Voltage, And Overcharge Protection, And Have Fully 3-Stage Pwm Charge Management. This 30A Solar Charge Controller Will Help You Improve The System Efficiency Safely And Prolong The Life Span Of The Battery..
Features
- UPGRADED SOLAR PANEL CONTROLLER: Compatible with 12V 24V system.This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller. You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2.5A (max).
- SAFE TO USE: Equipped with overcurrent protection, short-circuit protection, inverse connection protection, low voltage, and overcharge protection, and have fully 3-stage PWM charge management. This 30A solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
- PLEASE NOTE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.
- LCD DISPLAY: Let you know the status and data with LCD Display. You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, industrial, commercial, etc.
- WARRANTY: 12-month warranty and lifetime technique support. If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement.
- See more on Amazon...
Brand: Depvko | Manufacturer: Depvko
Dimensions: 1.30 x 5.28 x 2.80 inches
See On Amazon #6
Renogy Rover 40 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery
Asin: B01MSYGZGI | Model: RNG-CTRL-RVR40 | PartNumber: RNG-CTRL-RVR40 | Ean: 0810009719328, 0816360024651 | UPC: 810009719328, 816360024651
【Full System Protection】Meant To Safeguard Your System, The Self-Diagnostic Capability Can Assess And Protect Against Reverse Polarity, Battery Overcharging, Battery Over-Discharging, Overload, Short-Circuiting, And Reverse Current.
【Diverse Load Control】 Connect Dc Appliances Directly To The Optional Load Terminals And Monitor Consumption Or Set Up Timer Controls Directly From The Controller.
【4-Stage Safely Charging】Features 4-Stage Charging (Bulk, Absorption, Float, And Equalization) Of Lead Acid Batteries And 2-Stage Charging (Bulk And Absorption) For Lithiuim Batteries As Well As Lithium Reactivation.
【12V/24V Automatically Detect】Automatically Detects 12V Or 24V Dc System Voltages (For Non-Lithium Battery Types), And The Lcd Screen And Multiple Led Indicators Display The Solar Charging And Battery Operation Information, Customizable Parameters, And Error Codes.
Features
- Innovative MPPT Design Die-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98% It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day
- 12V/24V Automatically Detect Automatically detects 12V or 24V DC system voltages (for Non-Lithium battery types), and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes
- Full System Protection Meant to safeguard your system, the self-diagnostic capability can assess and protect against reverse polarity, battery overcharging, battery over-discharging, overload, short-circuiting, and reverse current
- 4-Stage Safely Charging Features 4-stage charging (Bulk, Absorption, Float, and Equalization) of Lead Acid Batteries and 2-stage charging (Bulk and Absorption) for Lithiuim batteries as well as Lithium Reactivation
- Diverse Load Control Connect DC appliances directly to the optional Load Terminals and monitor consumption or set up timer controls directly from the controller
- See more on Amazon...
First Available: 04/04/2016
Brand: Renogy | Manufacturer: Renogy
Dimensions: 2.85 x 6.81 x 9.37 Inches | Weight: 2.43 Pounds
Warranty: 2-year material warranty
See On Amazon #7
Renogy Voyager 20A 12V/24V PWM Waterproof Solar Charge Controller w/ LCD Display for AGM, Gel, Flooded and Lithium Battery, Used in RVs, Trailers, Boats, Yachts, Voyager 20A
Asin: B07YXZMKD2 | Model: Voyager 20A PWM | PartNumber: Voyager 20A PWM | Ean: 0810009713517 | UPC: 810009713517
Multiple Protections: The Voyager Controller Has Multiple Intelligent Protections Against Reverse Polarity, Over Charge, Short-Circuit, Reverse Current, Overload, And Over Discharge, Keeping Your Battery Fully Protected..
Backlit Lcd Displaying System: The Voyager Comes With An Lcd Display Showing Accurate And Timely Information Including Charging Current, Generated Energy, Temperature, Battery Voltage, And Error Codes That Allows Users To Monitor And Control Charging..
Support Multiple Battery Types: The Voyager Controller Can Automatically Sense 12V Or 24V System Voltage When Paired With A Gel, Agm, Or Flooded Batteries. It Also Comes With A Lithium Activation Feature..
Ip67 Rated Waterproof: With An Ip67 Rated Waterproof Design, The Voyager Controller Is Suitable For Outdoor Use And Will Remain Fully Operational When Exposed To Water Spray, Rain, Or Condensation..
Features
- 4-STAGE PWM Technology: The Voyager controller is equipped with advanced smart PWM technology with high charging efficiency. It provides 4-stage charging (Bulk, Absorption, Float and Equalization) in order to protect the battery.
- IP67 Rated Waterproof: With an IP67 rated waterproof design, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, rain, or condensation.
- Multiple Protections: The Voyager controller has multiple intelligent protections against reverse polarity, over charge, short-circuit, reverse current, overload, and over discharge, keeping your battery fully protected.
- Support Multiple Battery Types: The Voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries. It also comes with a Lithium activation feature.
- Backlit LCD displaying system: The Voyager comes with an LCD display showing accurate and timely information including charging current, generated energy, temperature, battery voltage, and error codes that allows users to monitor and control charging.
- See more on Amazon...
First Available: 11/24/2020
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.40 x 6.08 x 3.83 inches | Weight: 0.55 Pounds
Warranty: 2-year material and workmanship warranty
See On Amazon #8
Victron Energy SmartSolar MPPT 100V 20 amp 48-Volt Solar Charge Controller (Bluetooth)
Asin: B075NPQHQK | Model: MPPT 100|20 | PartNumber: MPPT 100|20 | Ean: 8719076043027, 0810019980657, 8380000025862, 8719076040934, 8697204790121 | UPC: 810019980657
Easily Program The Charger For Any Battery Type Using 'Presets' For Common Battery Types Or By Creating Your Own 100% Customized Settings..
The Intelligent Load Output Function Is A Game-Changer, Preventing Damage Caused By Running Batteries 'Flat.' You Can Configure The Voltage At Which The Victron Energy Smartsolar Disconnects A Load, Preventing Excessive Drain On Your Batteries..
Connectivity - With The Built-In Bluetooth Feature, You Can Wirelessly Monitor And Control Your Mppt With The Victron Connect App. Or, Connect To A Victron Energy Gx Device With A Ve.Direct Cable (Sold Separately) And Monitor From Anywhere In The World Using Vrm!.
With The Latest And Fastest Technology, This Mppt Charge Controller Maximizes Energy-Harvest From Your Solar Panels, Intelligently Driving It To Achieve Full Charge In The Shortest Possible Time. It Even Has The Power To Recharge Severely Depleted Batteries From 0 Volts.
Features
- Are you ready to take your solar energy game to the next level? Using a multi-stage, adaptive charging algorithm, the Victron Energy SmartSolar MPPT 100-Volt 20 amp is the ultimate solar charger for your batteries
- With the latest and fastest technology, this MPPT charge controller maximizes energy-harvest from your solar panels, intelligently driving it to achieve full charge in the shortest possible time. It even has the power to recharge severely depleted batteries from 0 volts
- Easily program the charger for any battery type using 'presets' for common battery types or by creating your own 100% customized settings.
- Connectivity - with the built-in Bluetooth feature, you can wirelessly monitor and control your MPPT with the Victron Connect app. Or, connect to a Victron Energy GX device with a VE.Direct cable (sold separately) and monitor from anywhere in the world using VRM!
- The intelligent Load output function is a game-changer, preventing damage caused by running batteries 'flat.' You can configure the voltage at which the Victron Energy SmartSolar disconnects a load, preventing excessive drain on your batteries.
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 5.91 x 8.27 x 1.97 Inches | Weight: 1.19 pounds
Warranty: Warranty
See On Amazon #9
[Upgraded] 30A Solar Charge Controller 12V/ 24V Solar Panel Charge Controller Intelligent Regulator with Dual USB Port Auto Parameter LCD Display and Timer Setting ON/Off Hours
Asin: B09LLMK7PD | Model: R000079 | PartNumber: R000079 | Ean: 0761594900007 | UPC: 761594900007
3-Stage Pwm Control Charging: Fully 3-Stage Pwm Regulation Charging Using Direct Charge, Lifting Charge, Floating Charge Three-Stage Pwm Regulation Charging Mode. Using The Controller To Realize Efficient And Fast Intelligent Charging, And Effectively Prolong The Service Life Of The Battery..
Confidence Service: Our Brand Werchtay Team Has Complete After-Sales Service, And The Product Comes With An Instruction Manual. If You Encounter Problems, Please Contact Our Team. We Provide One-Year Warranty And Lifetime After-Sales Service..
Multiple Intelligent Protection: Built-In Overcurrent Protection, Short Circuit Protection, Reverse Connection Protection, Open Circuit Protection, All Automatic Recovery, No Damage To The Controller, A Reliable Protector For Your Devices. If The Battery Voltage Is Lower Than 8V, The Solar Controller Will Automatically Shut Down To Protect The Battery Life.
Functional Lcd Screen: Easy To Install And Operate, Intuitive Lcd Display That Can Clearly Indicate The Status And Data Is Able To Switch Modes And Parameter Configuration, The Level Of Complete Power-Off Is Adjustable, Which Can Perfectly Protect The Lithium Battery From Over-Discharge, Suitable For Home, Industrial, Commercial Etc..
Features
- SMART PWM TECHNOLOGY: The controller compatibility with 12V and 24V system, Discharge Current: 30A; dual USB output 5V / 2.5A, Build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL. Controller mode: b1: lead-acid. b2: ternary lithium. b3: Lithium iron phosphate.
- FUNCTIONAL LCD SCREEN: Easy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc.
- 3-STAGE PWM CONTROL CHARGING: Fully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery.
- MULTIPLE INTELLIGENT PROTECTION: Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices. If the battery voltage is lower than 8V, the solar controller will automatically shut down to protect the battery life
- CONFIDENCE SERVICE: Our brand WERCHTAY team has complete after-sales service, and the product comes with an instruction manual. If you encounter problems, please contact our team. We provide one-year warranty and lifetime after-sales service.
- See more on Amazon...
Brand: WERCHTAY | Manufacturer: WERCHTAY
Dimensions: 1.50 x 5.30 x 2.75 inches
See On Amazon #10
Renogy 30A 12V/24V PWM Solar Charge Controller with LCD Display Flush Mount Design Negative Ground, Compatible with Sealed, Gel, Flooded and Lithium Batteries, Adventurer 30A,black
Asin: B07BBKFTNV | Model: Adventurer 30A Li 12V/24V | PartNumber: Adventurer 30A Li 12V/24V | Ean: 0816360026396 | UPC: 816360026396
【Flush Mount Design】Designed To Cleanly Flush Mount On Walls, Providing A Sleek, Integrated Look. An Included Surface Mount Attachment Allows For Versatility In Mounting..
【Multiple Battery Adaptation】 Deep Cycle Sealed (Agm), Gel, Flooded And Lithium Battery Option Ready..
【Real-Time Monitoring】The Rs232 Port Can Work With The Bt-1 Bluetooth Module To Deliver Real-Time Energy Data Across The Dc Home Smart Phone App & Renogy One M1.
【Negative Ground】The Adventurer Is A Negative Ground Controller. This Ensure Compatibility With Any Negative Ground System, Which Is The Standard And Most Conventional Way Of Grounding. Any Negative Connection On The Solar Module, Battery And Load Can Be Safely Earth Grounded As Required..
【Smart 4-Stage Pwm Charging】Smart 4-Stage Pwm Charging (Bulk, Boost, Float, And Equalization) Increases Battery Life And Improves System Performance. Intelligent Protection Against Reverse Polarity, Overcharging, Short-Circuit, And Reverse Current..
Features
- 12V/24V Automatically Detect Automatically detects 12V or 24V DC system voltages (for non-lithium batteries). The LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
- Smart 4-Stage PWM Charging Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.
- Flush Mount Design Designed to cleanly flush mount on walls, providing a sleek, integrated look. An included Surface Mount Attachment allows for versatility in mounting.
- Negative Ground The Adventurer is a negative ground controller. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. Any negative connection on the solar module, battery and load can be safely earth grounded as required.
- Multiple Battery Adaptation Deep Cycle Sealed (AGM), Gel, Flooded and Lithium battery option ready.
- Real-time Monitoring The RS232 port can work with the BT-1 Bluetooth module to deliver real-time energy data across the DC Home smart phone app & Renogy ONE M1
- See more on Amazon...
First Available: 02/22/2018
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.90 x 6.56 x 4.50 Inches | Weight: 0.60 pounds
Warranty: NEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.
See On Amazon #11
HUINE 20A 12V 24V Auto IP68 Waterproof PWM Solar Charge Controller Solar Panel Battery Intelligent Regulator for Solar System Caravan Boat(24 Hours Working Mode)
Asin: B07CK2PCC7 | Ean: 0661748132509 | UPC: 661748132509
Brand: HUINE | Manufacturer: HUINE
Dimensions: 0.83 x 3.23 x 1.77 Inches | Weight: 0.26 Pounds
See On Amazon #12
Intelligent 10A MPPT Solar Charge Controller, Digital LCD Display + Temp Sensor, 10 Amp 12 Volt Solar Panel Regulator with MC4 Connector, Perfect for 12V AGM, Gel, Flooded, Lead-Acid, Lithium Battery
Asin: B09W61YHH9 | Model: MPPT Bare Wire Open End | PartNumber: MPPT Bare Wire Open End
【 Works With Multiple Batteries 】 Compatible With Variety Of 12 Volt Batteries Of Agm, Gel, Deep Cycle, Sealed, Lead-Acid, Flooded And Lifepo4 Lithium Battery. 3 Stages Smart Charging: Boost, Float, And Equalization To Get The Maximum Use Of Solar Energy. Great For Deep Cycle, Starter, Marine, Car, Powersport And More..
【 Bare Wire Open End Connector 】 Bare Wire Open End Plug And 2 Set Wire Quick Connector Included Makes It Easy To Connect With Most Of The Solar Panels And Batteries In The Market..
【 Visual Monitor & No Power Consumpation 】 Equipped With Digital Lcd Display To Visual Monitor The Working Conditions Of Solar Panels And Battery. Powered Directly By Sunlight, Not Drain From Your Battery ! Please Expose The Solar Panel To The Full Sun And Ensure There Is No Shadow Or Overcast To Get Sufficient Sunlight To Start The Charge Controller..
【 Temperature Compensation 】An Integrated Thermal Temp Sensor Eliminates Over-Charging In Hot Climates And Under-Charging In Cold Climates. Allowing High Efficient Charging To Your Batteries. Temp Compensation Specifications: -3Mv/℃/2V.
【 Full Protections To Ensure Safety 】 Built In Internal Protection System And Smart 3 Stages Charging To Safeguard Your Battery From Over-Charge, Over-Discharge, Over-Voltage, Over-Current, Over-Load, Short Circuit, Reverse Polarity And Over-Temperature, To Maximally Avoids The Damage Due To System Fault Or Installation Error And Ensure Your Battery To Efficiently And Safely Charged To 100%..
【 Compact & Portable 】Improved Over The Pwm Charge Controller, Allto Solar Mppt (Maximum Power Point Tracking) Charge Controller Bringing A New Generation To Maximizing Use Solar Power To Charge Your System, It Is 25% Smaller In Size But Captures As High As 15%-30% Performance To Charge The Battery With No Additional Self Power Consumption. High Tracking Efficiency Of Up To 95% While Pmw Charge Controller Is 65%-80%. Automatically Detect 12V Dc System Voltage..
Features
- MPPT CHARGE CONTROLLER + MC4 CONNECTOR This 10Amp MPPT solar charge controller has bare wire end and 2 set quick connectors enabling it to work with most of solar panels and batteries in the market.
- COMPACT & PORTABLE Improved over the PWM charge controller, Allto Solar MPPT (Maximum Power Point Tracking) charge controller bringing a new generation to maximizing use solar power to charge your system, it is 25% smaller in size but captures as high as 15%-30% performance to charge the battery with no additional self power consumption. High tracking efficiency of up to 95% while PMW charge controller is 65%-80%. Automatically detect 12V DC system voltage.
- WORKS WITH MULTIPLE BATTERIES Compatible with variety of 12 volt batteries of AGM, Gel, Deep Cycle, Sealed, Lead-acid, Flooded and LiFePO4 Lithium Battery. 3 stages smart charging: boost, float, and equalization to get the Maximum use of solar energy. Great for deep cycle, starter, marine, car, powersport and more.
- FULL PROTECTIONS TO ENSURE SAFETY Built in internal protection system and smart 3 stages charging to safeguard your battery from over-charge, over-discharge, over-voltage, over-current, over-load, short circuit, reverse polarity and over-temperature, to maximally avoids the damage due to system fault or installation error and ensure your battery to efficiently and safely charged to 100%.
- VISUAL MONITOR & NO POWER CONSUMPATION Equipped with digital LCD display to visual monitor the working conditions of solar panels and battery. Powered directly by sunlight, not drain from your battery ! Please expose the solar panel to the full sun and ensure there is no shadow or overcast to get sufficient sunlight to start the charge controller.
- TEMPERATURE COMPENSATION An integrated thermal temp sensor eliminates over-charging in hot climates and under-charging in cold climates. Allowing high efficient charging to your batteries. Temp compensation specifications: -3mV/ /2V
- BARE WIRE OPEN END CONNECTOR Bare wire open end plug and 2 set wire quick connector included makes it easy to connect with most of the solar panels and batteries in the market.
- See more on Amazon...
Brand: Allto Solar | Manufacturer: Allto Solar
Dimensions: 0.98 x 5.51 x 1.97 inches
See On Amazon #13
[2023 Upgraded] 30A MPPT Solar Charge Controller, 12V/ 24V Solar Panel Intelligent Regulator with Adjustable LCD Display Dual USB Port Timer Setting Auto Parameter
Asin: B0C9PY8NV9 | Model: S062923 | PartNumber: S062923
【Safe To Use】With Intelligent Protection Against Overcurrent, Short-Circuit, Inverse, Low Voltage, And Overcharge, This 30A Mppt Solar Charge Controller Will Help You Improve The System Efficiency Safely And Prolong The Battery Lifespan..
【Buy With Confidence】12-Month Warranty And Lifetime Technique Support. If There Is Any Problem, Please Tell Us Through Amazon Email..
【Lcd Display】Let You Know The Status And Data With Lcd Display. You Can Switch Modes And Parameter Configurations Conveniently. And Also Use This Controller In Kinds Of Places Like Homes, Industrial, Commercial, Etc..
【Wide Compatibility】Compatible With 12V And 24V Systems. You Can Also Charge Your Mobile Phone, Tablet, Pcs Through Dual Usb Output 5V/2.5A (Max)..
Features
- UPGRADED SOLAR CONTROLLER This MPPT solar charge controller helps you manage the working of solar panels and batteries in solar systems automatically with the build-in industrial microcontroller, which could increase efficiency by 10%-30% compared with ordinary solar charge controllers. You don't need to reset it when the battery runs out cause it will memorize various parameters.
- WIDE COMPATIBILITY Compatible with 12V and 24V systems. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2.5A (max).
- SAFE TO USE With Intelligent protection against overcurrent, short-circuit, inverse, low voltage, and overcharge, this 30A MPPT solar charge controller will help you improve the system efficiency safely and prolong the battery lifespan.
- LCD DISPLAY Let you know the status and data with LCD Display. You can switch modes and parameter configurations conveniently. And also use this controller in kinds of places like homes, industrial, commercial, etc.
- BUY WITH CONFIDENCE 12-month warranty and lifetime technique support. If there is any problem, please tell us through Amazon email.
- See more on Amazon...
Brand: Depvko | Manufacturer: Depvko
See On Amazon #14
SOGTICPS 100A MPPT Solar Charge Controller 12V 24V 36V 48V LCD Display Battery Intelligent Regulator Max 100V Input Dual USB for Lead-Acid/Lithium
Asin: B0C6F7ML23 | Model: SY10048 | PartNumber: SY10048 | Ean: 0716963493307 | UPC: 716963493307
【Safe Voltage Protection】Mppt Solar Controller With Voltage Protection, Including Battery Over-Voltage And Over-Current Protection, Power Failure Protection, Overcharge Protection, Deep Discharge Protection, Reverse Connection Protection, And Overheat Temperature Protection..
【Please Note】This Solar Controller Combines Mppt And Pwm Charging Technologies,It Delivers A High Charging Efficiency And Excellent Value For Money.While It May Not Provide 100% True Mppt Functionality, It Still Delivers Reliable Performance..
【Multiple Battery Charging Options】Compatible With Seal, Gel, Flooded, Lifepo4 Battery Charging..
【Reliable Warranty Plan】Sogticps Offers A 1-Year Warranty. Lifetime Technical Support. Please Feel Free To Contact Our Team For Technical Support And Our Engineers Can Help You Find Advice And Solutions To Any Problems You May Have..
【User-Friendly Design】The Lcd Is Designed To Dynamically Display The Operation Data And Working Status Of The Equipment.Controller Parameters Display (Working Mode, Battery Voltage, Pv Charging Current, Battery Discharging Current, Product Working Temperature, Delay Time)..
【Multi-Functional Design】Multi-Function Lcd With Backlight Display And Clock Display, 7 Operating Modes: Charging Mode, Light Control Mode, Light Control + Time Delay Control Mode, Universal Control Mode, Manual Control Mode, Timing Control Mode..
Features
- Advanced MPPT Technology SOGTICPS 100A MPPT solar controller with advanced MPPT maximum power point tracking technology algorithm, 12V/24V/36V/48V automatic recognition; dual USB 5V charging ports,and the maximum power point of the pv array can be quickly tracked in any environment ,tracking efficiency not less than 99.5%. and significantly improve the utilization of energy in solar system.
- Multi-functional design Multi-function LCD with backlight display and clock display, 7 operating modes: charging mode, light control mode, light control + time delay control mode, universal control mode, manual control mode, timing control mode.
- Safe voltage protection MPPT solar controller with voltage protection, including battery over-voltage and over-current protection, power failure protection, overcharge protection, deep discharge protection, reverse connection protection, and overheat temperature protection.
- User-Friendly Design The LCD is designed to dynamically display the operation data and working status of the equipment.Controller parameters display (working mode, battery voltage, PV charging current, battery discharging current, product working temperature, delay time).
- Multiple battery charging options Compatible with Seal, GEL, Flooded, LifePO4 battery charging.
- Reliable warranty plan SOGTICPS offers a 1-year warranty. Lifetime technical support. please feel free to contact our team for technical support and our engineers can help you find advice and solutions to any problems you may have.
- Please note This solar controller combines MPPT and PWM charging technologies,It delivers a high charging efficiency and excellent value for money.While it may not provide 100% true MPPT functionality, it still delivers reliable performance.
- See more on Amazon...
Brand: SOGTICPS | Manufacturer: SOGTICPS
Dimensions: 7.24 x 7.67 x 2.59 inches
See On Amazon #15
Victron Energy SmartSolar MPPT 150V 35 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)
Asin: B073ZHRG9K | Model: SCC115035210 | PartNumber: SCC115035210 | Ean: 8719076040293, 8719076040187
By Constantly Monitoring The Voltage And Current Output Of Your Solar (Pv) Panels, Victron Energy Mppt Technology Ensures That Every Drop Of Available Power Is Rinsed Out Of Your Panels, And Harvested For Storage.
The Intelligent Load Output Function Prevents Damage Caused By Running Batteries 'Flat'. You Can Configure The Voltage At Which Smartsolar Disconnects A Load - Thereby Preventing Excessive Drain On Your Batteries.
Anytime Anywhere Remotely Control And Monitor The Extensive Features Of Your Victron Energy Smartsolar Mppt Charge Controller With Built-In Bluetooth By Pairing It With Your Smartphone Or Other Device Via Victronconnect.
Victron Energy Smartsolar Mppt Charge Controller Will Even Recharge A Severely Depleted Battery. It Can Operate With A Battery Voltage As Low As 0 Volts, Provided The Cells Are Not Permanently Sulphated Or Otherwise Damaged.
Features
- Victron Energy SmartSolar MPPT 150-Volt 35 amp: A solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, Victron Energy SmartSolar MPPT maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time
- Victron Energy SmartSolar MPPT charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged
- By constantly monitoring the voltage and current output of your solar (PV) panels, Victron Energy MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage
- Anytime anywhere remotely control and monitor the extensive features of your Victron Energy SmartSolar MPPT charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect
- The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 3.54 x 8.07 x 5.12 inches | Weight: 3.53 pounds
Warranty: Warranty
See On Amazon #16
GHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Solar Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation
Asin: B01LZZMDSQ | Model: CMG-2420 | PartNumber: CMG-2420 | Ean: 0611864444666 | UPC: 611864444666
Power-Efficient: Microcontroller Digital Accuracy, When Solar Panel Regulator Is Charging, The Arrow Between The Panel Icon And The Battery Icon Will Flash Fastly, When The Battery Was A Full Charge, It Will Be Slow Flashed, Will Stop Charging. The Function Of The Solar Charge Controller Is To Protect The Voltage Overshoot And Discharge. Available For Dc Lamp And Phone Charging (Please Correctly Connect The Positive And Negative Terminals, Makes Sure All Terminals Are Connected Tightly.).
Protection Functions: Overload And Short Circuit Protection, Lightning Protection, Under-Voltage Protection, Over-Charging Protection, Reverse Polarity Protection. Use Pwm And Wpc Mode, Improve System Efficiency And Prolong The Life Span Of The Battery.
Rated Discharge Current : 20A; Usb Output Voltage: 5V; Usb Output Current: 1.5A; Dc Output Voltage: 12V-24V, Dc Output Current: 20A. To Connect Your Load And The Cables With The Right Polarity And Then Connect With The Load Output Port Of The Controller. Pay Special Attention To + - Polarity To Avoid Reversed Connection.
Fully Automatic: This Solar Panel Regulator With Output Switch, Easy To Operate. The Battery Indicator Light On The Controller Will Be On If Successfully Connected.
Features
- LCD Screen Display: This solar panel charger controller with LCD digital screen which is with energy-saving backlight to display all parameters, display better, more clea and more power-efficient
- Fully Automatic: This solar panel regulator with output switch, easy to operate. The battery indicator light on the controller will be on if successfully connected
- Power-efficient: Microcontroller digital accuracy, when solar panel regulator is charging, the arrow between the panel icon and the battery icon will flash fastly, when the battery was a full charge, it will be slow flashed, will stop charging. The function of the solar charge controller is to protect the voltage overshoot and discharge. Available for DC lamp and phone charging (Please correctly connect the positive and negative terminals, makes sure all terminals are connected tightly.)
- Rated Discharge Current : 20A; USB Output Voltage: 5V; USB Output Current: 1.5A; DC Output Voltage: 12V-24V, DC Output Current: 20A. To connect your load and the cables with the right polarity and then connect with the load output port of the controller. Pay special attention to + - polarity to avoid reversed connection
- Protection Functions: Overload and Short circuit protection, Lightning protection, Under-voltage protection, Over-charging protection, Reverse Polarity protection. Use PWM and WPC mode, improve system efficiency and prolong the life span of the battery
- See more on Amazon...
Brand: GHB | Manufacturer: Smile&Satisfaction
Dimensions: 1.18 x 5.12 x 3.94 inches
See On Amazon #17
Solar Battery Controller 12v/24v Solar Panel Charge Controller Ground Solar Panel Controller Regulator with Adjustable LCD Display and Dual USB Port Timer Setting PWM Auto Parameter(2 Pieces,30A)
Asin: B09T76HN43
Abs Engineering Plastic Shell: The Solar Panel Charge Controller Is Designed With High Strength Abs Engineering Plastic Shell, Impact Resistance, High Ignition Point, Anti Aging, Corrosion Resistance And Other Characteristics, Effective Service Life And Safety.
Widely Applied: Outdoor Solar Controller With Dual Usb Ports Is Compatible With 12V/ 24V Systems; The 5V/2A Usb Port Supports Mobile Phone Charging Or Any Other 5 Voltage Devices, Which Can Protect The Lithium Battery From Overcharge And Discharge, Suitable For Home, Industry, Business And So On.
30A Solar Charge Controller: This Solar Battery Controller Regulator Is Equipped With Industrial Grade Main Control Chip, With Full 3 Level Pwm Charge Management, Dual Mos Anti Backflow Circuit, Ultra Low Heat Generation, Improved System Efficiency.
Lcd Display: The Operation Of The Solar Controller High Definition Display System Is Clear At A Glance, And The Display Timing Settings Correspond To The Lcd Display One By One, Which Is Clear And Intuitive; At The Same Time, One Button Operation Can Complete The Setting.
Features
- Safe Use: built in overcurrent/ protection function, open circuit protection, reverse polarity protection, they are self recovery type, do not hurt the panel solar controller, more safely applied in home, industry and so on
- LCD Display: the operation of the solar controller high definition display system is clear at a glance, and the display timing settings correspond to the LCD display one by one, which is clear and intuitive; At the same time, one button operation can complete the setting
- ABS Engineering Plastic Shell: the solar panel charge controller is designed with high strength ABS engineering plastic shell, impact resistance, high ignition point, anti aging, corrosion resistance and other characteristics, effective service life and safety
- 30A Solar Charge Controller: this solar battery controller regulator is equipped with industrial grade main control chip, with full 3 level PWM charge management, dual MOS anti backflow circuit, ultra low heat generation, improved system efficiency
- Widely Applied: outdoor solar controller with dual USB ports is compatible with 12V/ 24V systems; The 5V/2A USB port supports mobile phone charging or any other 5 voltage devices, which can protect the lithium battery from overcharge and discharge, suitable for home, industry, business and so on
- See more on Amazon...
Brand: Flutesan | Manufacturer: Flutesan
See On Amazon #18
EEEkit 30A Solar Charge Controller, Solar Panel Charger Controller 12V/24V, Multi-Function Adjustable LCD Display with Dual USB Port Timer Setting PWM Auto Parameter
Asin: B07R8TRJ8C | Model: H026100-E008135338FBA | PartNumber: H026100-E008135338FBA
Intelligent Design: Build-In Industrial Microcontroller For Automatical Management, Memorizing Various Parameters Set By The User And The Data Won't Be Lost When The Battery Runs Out. The Solar Controller Will Turn Off Automatically Once The Voltage Is Too Low..
Easy To Use: The Charge Controller Should Connect The Battery First, Then The Solar Panel, And Finally The Load! You Can Change The Settings By The Simple One-Button Operation. Don't Worry Of The Unsatisfied Product You Received. We Offer A 30-Days Money-Back Guarantee And 12-Month Warranty For Quality-Related Issues..
Functional Lcd Display: Intuitive Lcd Display That Can Clearly Indicate The Status And Data Is Able To Switch Modes And Parameter Configuration, Suitable For Home, Industrial, Commercial, Etc..
Reliable Protection: Eeekit Solar Charge Regulator Provides Over-Current Protection, Short-Circuit Protection, Inverse Connection Protection, Low Voltage And Overcharge Protection, A Reliable Protector For Your Devices..
Features
- WIDE COMPATIBILITY: The solar charger controller with 30A rated discharge current is compatible with 12V or 24V system automatically, suitable for lead-acid batteries: OPEN, AGM, GEL. Dual USB 5V/3A output ports support mobile phones, tablet PCs or other devices that require 5V voltage. Please read the manual carefully.
- RELIABLE PROTECTION: EEEKit solar charge regulator provides over-current protection, short-circuit protection, inverse connection protection, low voltage and overcharge protection, a reliable protector for your devices.
- INTELLIGENT DESIGN: Build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. The solar controller will turn off automatically once the voltage is too low.
- FUNCTIONAL LCD DISPLAY: Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, industrial, commercial, etc.
- EASY TO USE: The charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation. Don't worry of the unsatisfied product you received. We offer a 30-days money-back guarantee and 12-month warranty for quality-related issues.
- See more on Amazon...
Brand: EEEKit | Manufacturer: EEEKit
Dimensions: 2.50 x 7.00 x 13.50 inches
See On Amazon #19
[ ]ECO-WORTHY Solar Charge Controller 30A Solar Panel Custom Battery Regulator, Dual USB Port Auto 12V/24V PWM for FLD/LiFePO4/SLD/GEL
Asin: B0CYCD52D3 | Ean: 0810127132955 | UPC: 810127132955
[High-Precision Measurement] Upgraded Components, Capable Of Accurately Measuring Current And Voltage With An Error Of Less Than 1%. Equipped With A Clear Lcd Display For Accurate Real-Time Data; New Upgrade Three Buttons For Convenient Mode Switching And Simple Parameter Settings..
[Widely Used] Durable Metal Backplate For Effective Heat Dissipation And Protection Of Internal Components. Ideal For Rv Camping, Boating, And More Outdoor Applications..
[Warranty] 1 Year With 24/7 Tech Support, If You Have Any Problems Or Questions About The Product, Please Feel Free To Contact Us Through Amazon Or Call Eco-Worhty Hotline, Eco-Worthy Team Will Actively Provide You With Professional Solutions..
[Intelligent 3-Level Pwm Charging] Full Three-Level Pwm Intelligent Charging Management (Bulk, Absorber, Float), And Multiple Intelligent Protections Against Reverse, Short Circuit, Overcurrent, Low/High Voltage, Overheating. Improving System Efficiency And Performance, Extending Battery Lifespan..
[Compatible With All Batteries] Compatible With All 12V&24V Batteries, Supports Custom Battery Parameters (Cus Mode), And Allows Easy Selection Of Preset Battery Types: Lfp, Fld, Sld, Gel..
Features
- [Newly Upgraded] Upgraded 30A PWM Solar Charge Controller with improved internal components. Automatically detects 12V/24V DC system voltage, maximum discharge current of 30A, supporting a maximum system power of 12V 750W; 24V 1500W. Built-in dual USB outputs 5V/2A for charging your devices on-the-go.
- [Compatible with All Batteries] Compatible with all 12V&24V batteries, supports custom battery parameters (CUS mode), and allows easy selection of preset battery types: LFP, FLD, SLD, GEL.
- [High-Precision Measurement] Upgraded components, capable of accurately measuring current and voltage with an error of less than 1%. Equipped with a clear LCD display for accurate real-time data; New upgrade three buttons for convenient mode switching and simple parameter settings.
- [Intelligent 3-Level PWM Charging] Full three-level PWM intelligent charging management (bulk, absorber, float), and multiple intelligent protections against reverse, short circuit, overcurrent, low/high voltage, overheating. Improving system efficiency and performance, extending battery lifespan.
- [Widely Used] Durable metal backplate for effective heat dissipation and protection of internal components. Ideal for RV camping, boating, and more outdoor applications.
- [Warranty] 1 year with 24/7 tech support, if you have any problems or questions about the product, please feel free to contact us through Amazon or call ECO-WORHTY hotline, ECO-WORTHY team will actively provide you with professional solutions.
- See more on Amazon...
Brand: ECO-WORTHY | Manufacturer: ECO-WORTHY
Dimensions: 1.18 x 5.91 x 3.74 Inches
See On Amazon #20
BougeRV Li 30A PWM Solar Charge Controller 12V 24V, with Backlit Display, USB Port, Negative Ground Battery Intelligent Regulator for Solar Panels Compatible with LFP, AGM, SLD, FLA, for RV, Off-Gird
Asin: B0B1JBR813 | Model: 30A PWM Negative | PartNumber: 30A PWM Negative
Battery Compatibility And Maintenance: Compatible With Various 12V Or 24V Batteries, Such As Sld, Fld, Gel, Agm, Sla, Lifepo4, Ternary Lithium Battery And Lto Battery. Including The Ability To Program The Solar Charge Controller For Best Charging And Maintenance Of Various Battery Types. The Solar Panel Regulator Is Dependable To Be Your Battery Maintainer..
Neat And Safe Wiring: Come With 3 Pairs Of Spade Terminals, It Is Easy To Grip The Wires More Firmly And Make A Neat Wiring. Please Note That Turn The Screwdriver Counterclockwise First, In Order To Open Up The Wire Clamp Holes. Hook Up The Battery First, Positive Wire, Then Negative Wire. After That, Connect The Controller To The Solar Panel, Please Note That Do Not Disconnect The Battery When The Solar Panels Are Active..
Solar Panel Regulator: Max Pv Input Voltage 55 Volts, This Solar Panel Regulator Can Handle 4500 Watts Input For 12 Volts Battery System, 900 Watts Input For 24 Volts System..
Li Compatibility: Not Only Compatible With Traditional Battery, The Pwm Controller Also Has Clear And Special Icons For Various Lithium Batteries On The Lcd Screen, Such As Lfp For Lifepo4, Li For Ternary Lithium Battery, Lto For Lithium-Titanium-Oxide. With Setting To Li Battery Type, This Solar Charge Controller Also Has A Function To Jumpstart Your Lithium Battery In Case It Gets Overly Discharged. Don't Need To Buy A New Controller For The Upgraded Lithium-Ion Batteries..
Features
- EASY-READ BACKLIT DISPLAY: To check the PV status and the Battery status easily, the 10A solar panel regulator will cycle the PV input current and the battery voltage on the main interface with real-time value every 3 seconds. Larger size screen and 50% brightness in no operation, the solar charge controller is easy to read in dim light. Allows you to see exactly what the controller was doing and how much power is being drawn in from the panel(s).
- Li COMPATIBILITY: Not only compatible with traditional battery, the PWM controller also has clear and special icons for various Lithium batteries on the LCD screen, such as LFP for LiFePO4, Li for Ternary lithium battery, LTO for Lithium-Titanium-Oxide. With setting to Li battery type, this solar charge controller also has a function to jumpstart your lithium battery in case it gets overly discharged. Don't need to buy a new controller for the upgraded Lithium-ion batteries.
- BATTERY COMPATIBILITY AND MAINTENANCE: Compatible with various 12v or 24v batteries, such as SLD, FLD, GEL, AGM, SLA, LiFePO4, ternary lithium battery and LTO battery. Including the ability to program the solar charge controller for best charging and maintenance of various battery types. The solar panel regulator is dependable to be your battery maintainer.
- SOLAR PANEL REGULATOR: Max PV input voltage 55 volts, this solar panel regulator can handle 4500 watts input for 12 volts battery system, 900 watts input for 24 volts system.
- NEAT AND SAFE WIRING: Come with 3 pairs of spade terminals, it is easy to grip the wires more firmly and make a neat wiring. Please note that turn the screwdriver counterclockwise first, in order to open up the wire clamp holes. hook up the battery first, positive wire, then negative wire. After that, connect the controller to the solar panel, please note that do not disconnect the battery when the solar panels are active.
- See more on Amazon...
Brand: BougeRV | Manufacturer: BougeRV
Dimensions: 1.92 x 5.92 x 3.95 inches
Warranty: Manufacturer warranty for 18 months from date of purchase.
See On Amazon
Looking For Something Else?
Search