uxcell #25 Chain Roller Sprocket, 8mm Bore 1/4" Pitch 16 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1VLZX4
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 16, Outside Diameter: 35.5mm / 1.4-inch, Bump Width: 12mm / 0.47-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 8mm / 0.31-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 25 Chain Roller Sprocket
#1
uxcell 15 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 10mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09QSQ7KKP | Model: a21121100ux0298 | PartNumber: a21121100ux0298
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell 25 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 8mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09SCM47T4 | Model: a21121100ux0398 | PartNumber: a21121100ux0398
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #3
uxcell 25 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 14mm Bore Black Oxide C45 Carbon Steel, Keyway with Set Screws for ISO 04C
Asin: B09SD5K1VF | Model: a21121100ux0413 | PartNumber: a21121100ux0413
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Keyway With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell #25 Chain Idler Sprocket, 12mm Bore 1/4" Pitch 20 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Double Bearing for ISO 04C Chains
Asin: B09PDT5NSV | Model: a21120100ux0222 | PartNumber: a21120100ux0222
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With Double Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 20; Bearing Model: 6901Z; Outside Diameter: 43mm / 1.69-inch; Bump Width: 6mm / 0.24-inch; Total Width: 15mm / 0.59-inch; Bore Diameter: 12mm / 0.47-inch; Pitch: 1/4-inch / 6.35mm; Tooth Width: 3mm / 0.12-inch; 1 x Idler Sprocket
- Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell #25 Chain Roller Sprocket, 12mm Bore 1/4" Pitch 12 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1RNZBB
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 12, Outside Diameter: 27.5mm / 1.08-inch, Bump Width: 9.5mm / 0.37-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 12mm / 0.47-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell 16 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 15mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09QSQ7PGF | Model: a21121100ux0307 | PartNumber: a21121100ux0307
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 25 Tooth Roller Sprocket, 25 Chain Single Strand 1/4" Pitch, 12mm Bore Black Oxide C45 Carbon Steel, 4x1.8mm Keyway with Set Screws for ISO 04C
Asin: B09SD235VY | Model: a21121100ux0410 | PartNumber: a21121100ux0410
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Keyway With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell #25 Chain Roller Sprocket, 12mm Bore 1/4" Pitch 15 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1RRTFB
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 15, Outside Diameter: 33.5mm / 1.32-inch, Bump Width: 12mm / 0.47-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 12mm / 0.47-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell #25 Chain Roller Sprocket, 8mm Bore 1/4" Pitch 9 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1RGB13
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 9, Outside Diameter: 21mm / 0.83-inch, Bump Width: 8.5mm / 0.33-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 8mm / 0.31-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 18 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 8mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09QSRMVCV | Model: a21121100ux0315 | PartNumber: a21121100ux0315
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell #25 Chain Roller Sprocket, 8mm Bore 1/4" Pitch 10 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1XFFSM
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 10, Outside Diameter: 23.5mm / 0.93-inch, Bump Width: 9.5mm / 0.37-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 8mm / 0.31-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell ISO/DIN 06B-1 Roller Chain Sprocket B Type 25mm Bore, 3/8" Pitch, A3-Steel Single Strand Roller Sprocket Hardened 18 Tooth
Asin: B0CTMSR55P
Application: The Sprocket Is Applied In Various Industrial Circumstances, Such As Milling Machines, Drill Presses, And Other Machinery Transmission Operations.
Installation: Chain Sprockets Are Typically Mounted In A Fixed Position On A Stationary Shaft. They Are Secured Using A Keyway And 2Pcs Set Screws Positioned At 90-Degree Intervals, Ensuring A Secure And Convenient Installation Of The Sprocket Onto The Shaft..
Feature: The B-Type Sprocket Is Equipped With A Set Of Teeth On Its Circumference, Connected To Other Gears Through A Fasten. On The Opposite Side, There Is A Hub That Can Accommodate Different Types Of Bushings. It Ensures High Transmission Efficiency When Transferring Energy.
Material: The Sprocket Is Made Of A3-Steel, And The Teeth Are High-Frequency Quenched, Which Exhibits High Hardness And Wear Resistance..
Features
- Size: B type mechanical chain sprockets 18 teeth, 25mm bore, 3/8" (9.252mm) pitch, 8mm keyway, with 2pcs set screws at 90 degrees.
- Material: The sprocket is made of A3-steel, and the teeth are high-frequency quenched, which exhibits high hardness and wear resistance.
- Application: The sprocket is applied in various industrial circumstances, such as milling machines, drill presses, and other machinery transmission operations
- Feature: The B-type sprocket is equipped with a set of teeth on its circumference, connected to other gears through a fasten. On the opposite side, there is a hub that can accommodate different types of bushings. It ensures high transmission efficiency when transferring energy
- Installation: Chain sprockets are typically mounted in a fixed position on a stationary shaft. They are secured using a keyway and 2pcs set screws positioned at 90-degree intervals, ensuring a secure and convenient installation of the sprocket onto the shaft.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell 12 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 12mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09QSQN6D4 | Model: a21121100ux0285 | PartNumber: a21121100ux0285
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #14
uxcell 2pcs ISO/DIN 06B-1 Roller Chain Sprocket B Type 25mm Bore, 3/8" Pitch, A3-Steel Single Strand Roller Sprocket Hardened 17 Tooth
Asin: B0CTMS2P32
Application: The Sprocket Is Applied In Various Industrial Circumstances, Such As Milling Machines, Drill Presses, And Other Machinery Transmission Operations.
Installation: Chain Sprockets Are Typically Mounted In A Fixed Position On A Stationary Shaft. They Are Secured Using A Keyway And 2Pcs Set Screws Positioned At 90-Degree Intervals, Ensuring A Secure And Convenient Installation Of The Sprocket Onto The Shaft..
Feature: The B-Type Sprocket Is Equipped With A Set Of Teeth On Its Circumference, Connected To Other Gears Through A Fasten. On The Opposite Side, There Is A Hub That Can Accommodate Different Types Of Bushings. It Ensures High Transmission Efficiency When Transferring Energy.
Material: The Sprocket Is Made Of A3-Steel, And The Teeth Are High-Frequency Quenched, Which Exhibits High Hardness And Wear Resistance..
Features
- Size: 2pcs B type mechanical chain sprockets 17 teeth, 25mm bore, 3/8" (9.252mm) pitch, 8mm keyway. Each sprocket with 2pcs set screws at 90 degrees.
- Material: The sprocket is made of A3-steel, and the teeth are high-frequency quenched, which exhibits high hardness and wear resistance.
- Application: The sprocket is applied in various industrial circumstances, such as milling machines, drill presses, and other machinery transmission operations
- Feature: The B-type sprocket is equipped with a set of teeth on its circumference, connected to other gears through a fasten. On the opposite side, there is a hub that can accommodate different types of bushings. It ensures high transmission efficiency when transferring energy
- Installation: Chain sprockets are typically mounted in a fixed position on a stationary shaft. They are secured using a keyway and 2pcs set screws positioned at 90-degree intervals, ensuring a secure and convenient installation of the sprocket onto the shaft.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell #25 Chain Idler Sprocket, 6mm Bore 1/4" Pitch 19 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Single Bearing for ISO 04C Chains
Asin: B09PDVXFGX | Model: a21120100ux0206 | PartNumber: a21120100ux0206
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 19; Bearing Model: 636Z; Outside Diameter: 41mm / 1.61-inch; Bump Width: 6mm / 0.24-inch; Total Width: 13mm / 0.51-inch; Bore Diameter: 6mm / 0.24-inch; Pitch: 1/4-inch / 6.35mm; Tooth Width: 2.8mm / 0.11-inch; 1 x Idler Sprocket
- Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 9 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 8mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09QSQZY47 | Model: a21121100ux0273 | PartNumber: a21121100ux0273
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #17
uxcell 20 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 20mm Bore Black Oxide C45 Carbon Steel, Keyway with Set Screws for ISO 04C
Asin: B09QSQ5HXW | Model: a21121100ux0349 | PartNumber: a21121100ux0349
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Keyway With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 11 Teeth Sprocket Type B Single Strand 5/8" Pitch, 10mm Bore A3 Carbon Steel for 50 Roller Chain
Asin: B09TG1K7P1 | Model: a22012000ux0344 | PartNumber: a22012000ux0344
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of A3 Carbon Steel. High-Frequency Quenching Treatment Of Teeth, The Surface Hardness, Wear Resistance Are Significantly Improved. The Part Without Quenching Retains The Original Toughness And Is Easy To Further Process. It Can Be Processed Into Different Inner Diameter Sizes According To The Requirements Of Use..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. This Sprocket Has A Hub Extension On One Side To Provide Stability. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket; Size: Number of Teeth: 11; Outside Diameter: 62mm / 2.44-inch; Bump Width: 16mm / 0.63-inch; Total Width: 25mm / 0.98-inch; Bore Diameter: 10mm / 0.39-inch; Pitch: 5/8-inch / 15.875mm; Tooth Width: 8mm / 0.31-inch
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 14 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 8mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09QSPY5FP | Model: a21121100ux0292 | PartNumber: a21121100ux0292
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell 20 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 17mm Bore Black Oxide C45 Carbon Steel, Keyway with Set Screws for ISO 04C
Asin: B09QYB1CD5 | Model: a21121100ux0346 | PartNumber: a21121100ux0346
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Keyway With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon
Looking For Something Else?
Search