TEKTON 8 mm Ball End Hex L-Key | KLX82080
Asin: B0CDN9R794 | Model: KLX82080 | PartNumber: KLX82080 | Ean: 0020209063217 | UPC: 020209063217
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.20-Degree Ball Angle Increases Access – Our L-Keys Implement A Steep Ball-End Angle That Increases Your Ability To Access Fasteners While Still Maintaining Sufficient Strength.
Clear Markings – With The Exception Of The Smallest Sizes, Tekton L-Key Sizes Are Marked In Two Ways–Both With A High-Visibility Laser Marking And A Stamped Marking (Sizes 0.050 Inch And 1.3 Mm Are Too Small To Laser Mark, Sizes 0.050 Inch, 1/16 Inch, 5/64 Inch, 1.3 Mm, 1.5 Mm, And 2 Mm Are Too Small To Stamp).
Maximum Torque Strength – We Make Our L-Keys With 8660 Nickel Chromium Molybdenum Steel That's Heat-Treated To Hrc 54-58 To Produce Tools That Are Hard, But Not Brittle; As A Result, The Maximum Torque Of The L-Keys Consistently Exceeds The Asme Standards For Minimum Torsion Load And The Iso Standards For Minimum Proof Torque.
Tight Fit With Fasteners – We Precisely Manufacture Our Hex Key Geometry On The Large End Of The Applicable Range, Resulting In Less Slop In Fasteners.
Features
- High Leverage We designed the keys to be longer in the largest sizes to increase leverage where it matters
- Tight Fit with Fasteners We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners
- 20-Degree Ball Angle Increases Access Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength
- Maximum Torque Strength We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque
- Clear Markings With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways both with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1/16 inch, 5/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.40 x 7.90 x 1.50 inches | Weight: 0.22 Pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon Similar To TEKTON 8 mm Ball End
#1
ELEAD 31-Piece Hex Key Set - Allen Wrench Set, SAE and Metric Allen Keys MM(0.7mm-10mm) SAE(0.028"-3/8) Heat-Treated, Torque Handle, High Leverage, Long & Short Keys, Easy Organization
Asin: B0BVHK7GTF | Model: ED70010 | PartNumber: ED70010
【Torque Handle】 Comes With A Torque Handle For Added Force During Loading And Unloading Fasteners, Increasing Reach And Enhancing Torque Performance..
【Easy Organization】 High-Visibility Size Markings On Each Wrench And A Sturdy Carrying Case For Quick Size Selection And Convenient Storage..
【Complete Coverage】 31-Piece Allen Wrench Set With Both Inch And Metric Measurements, Covering All Hexagon Socket Screws For Comprehensive Use..
【High Leverage】 Conventional Drive End On Both Long And Short Keys Allows For High Leverage On Stubborn Fixings, Ensuring Efficient Operation..
Features
- PREMIUM MATERIAL Heat-treated steel with black-oxide finish, featuring 15 long reach keys and 15 high leverage short keys for durability and strength.
- HIGH LEVERAGE Conventional drive end on both long and short keys allows for high leverage on stubborn fixings, ensuring efficient operation.
- TORQUE HANDLE Comes with a torque handle for added force during loading and unloading fasteners, increasing reach and enhancing torque performance.
- COMPLETE COVERAGE 31-piece Allen wrench set with both inch and metric measurements, covering all hexagon socket screws for comprehensive use.
- EASY ORGANIZATION High-visibility size markings on each wrench and a sturdy carrying case for quick size selection and convenient storage.
- See more on Amazon...
Brand: ELEAD | Manufacturer: SEDY
See On Amazon #2
SEDY 32-Piece Hex Key Wrench Set, Metric and SAE Allen Wrenches (0.028-3/8 inch, 0.7-10 mm) L Shape Allen Keys, Chrome Vanadium Steelwith 2x Extension Handle
Asin: B08MVKQKYL | Model: SDY-94296 | PartNumber: SDY-94296
Precision Workmanship - Precision Machined And Chamfered Hexagonal Ends Provide A Comfortable Fit And Smooth Insert Fasteners, And Protect Your Hardware From Wear..
Package Include - 30 Pieces Of Hex Key Wrenches From Large To Small And Even Mini. Including ▲15 X Long Pattern Hex Key Wrenches: 0.028, 0.035, 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 In. ▲15 X Short Pattern Hex Key Wrenches: 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8, 10 Mm. ▲2Pcs Extension Bars..
Stay Organized - Comes In A Compact And Foldable Storage Case, With Size Indexed Individual Slot For Each Wrench For Quick Size Selection And Easy Organizing..
High-Quality - Made Of Hardened Treated Chrome Vanadium Steel Alloy (Cr-V) With Black-Oxide Finish, With Stronger Hardness, Better Toughness And Greater Torque, It Is Firm And Durable..
Features
- WIDE APPLICATION - The Hex Key Allen Wrench Set for disassembling and installing the most hexagon nuts, bicycles, furniture, machinery and equipment. Versatile long / short arm design provides additional reach for deep work spots on the long end and extra leverage for tight fastener on the other short end.
- HIGH-QUALITY - Made of Hardened treated Chrome Vanadium Steel Alloy (Cr-V) with black-oxide finish, with stronger hardness, better toughness and greater torque, it is firm and durable.
- PRECISION WORKMANSHIP - Precision machined and chamfered hexagonal ends provide a comfortable fit and smooth insert fasteners, and protect your hardware from wear.
- STAY ORGANIZED - Comes in a compact and foldable storage case, with size indexed individual slot for each wrench for quick size selection and easy organizing.
- PACKAGE INCLUDE - 30 pieces of hex key wrenches from large to small and even mini. Including 15 x long pattern hex key wrenches: 0.028, 0.035, 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in. 15 x short pattern hex key wrenches: 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8, 10 mm. 2pcs extension bars.
- See more on Amazon...
Brand: SEDY | Manufacturer: SEDY
Dimensions: 7.70 x 5.60 x 1.40 inches | Weight: 1.76 Pounds
See On Amazon #3
LOZAGU 35-Piece Allen Wrench Sets Metric and Standard Hex Key Set, Allen Key Set, MM(0.7mm-10mm) SAE(0.028"-3/8), Chrome Vanadium Steel
Asin: B0CFHWB2H1 | Model: 35PCS Allen Wrench Set | PartNumber: 35PCS Allen Wrench Set
【Allen Wrench & Screwdriver 】Including 35 Sizes: (15) Standard Sae 0.028, 0.035, 0.05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8” And (17) Metric 0.7, 0.9, 1.27, 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 10Mm. (1) Torque Handle. (2)L-Shaped Screwdrive Ph1 Sl3/16 And Ph2 Sl1/4..
【Storage Box】Each Wrench Has Its Corresponding Size Mark, And The Firm Slot Is Convenient For Storage To Ensure That The Wrench Is Placed Neatly And Convenient For Use..
【Precision Machining】The Precision Machined And Chamfered Hexagonal Ends Allow For Tight And Smooth Insertion Of Fasteners, Reducing Wear And Can Withstand Prolonged Daily Use To Ensure Maximum Durability And Protect Your Hardware From Rounding..
【Stronger Torque Force】The L-Shaped Design Provides Additional Flexibility For The Long End And Additional Advantages For Another Short End Fastener. The Additional Torque Handle Can Enhance Torque Performance During Loading And Unloading Of Fasteners..
Features
- HIGH-QUALITY Hex Keys is Made of Chrome Vanadium Steel (Better strength than carbon steel), with a Black Oxide Surface After Heat Treatment, Which is Durable.
- STRONGER TORQUE FORCE The L-shaped design provides additional flexibility for the long end and additional advantages for another short end fastener. The additional torque handle can enhance torque performance during loading and unloading of fasteners.
- ALLEN WRENCH & SCREWDRIVER Including 35 sizes: (15) Standard SAE 0.028, 0.035, 0.05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 and (17) Metric 0.7, 0.9, 1.27, 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 10mm. (1) Torque Handle. (2)L-Shaped Screwdrive PH1 SL3/16 and PH2 SL1/4.
- PRECISION MACHINING The precision machined and chamfered hexagonal ends allow for tight and smooth insertion of fasteners, reducing wear and can withstand prolonged daily use to ensure maximum durability and protect your hardware from rounding.
- STORAGE BOX Each Wrench Has its Corresponding Size Mark, and The Firm Slot is Convenient for Storage to Ensure That The Wrench is Placed Neatly and Convenient for Use.
- See more on Amazon...
Brand: LOZAGU | Manufacturer: LOZAGU
Dimensions: 2.10 x 8.60 x 6.10 inches | Weight: 2.13 Pounds
See On Amazon #4
100mm Extended Allen Wrench Drill Bit Set, PTSLKHN 10pc Metric Hex Impact Driver Bits, Magnetic Hex Drill Bits Set
Asin: B09ZNWX3MM | Ean: 0602309890063 | UPC: 602309890063
Convenient Storage And Organization: The Black Phosphate Treatment Of The Hex Bits Not Only Provides Additional Protection Against Corrosion But Makes Them Easy To Spot In Your Toolbox..
Satisfaction Guaranteed: We Stand Behind The Quality And Durability Of Our Products, If You Are Not Completely Satisfied With Your Purchase And Have Any Questions, Please Feel Free To Contact Us! This Means That You Can Buy With Confidence, Knowing That You're Getting A High-Quality Product That's Backed By A Reputable Company..
100Mm Long Hex Bit Set: 10 Pieces Metric Of 1.5Mm, 2Mm, 2.5Mm, 3Mm, 3.5Mm, 4Mm, 5Mm, 6Mm, 7Mm, 8 Mm, Is Ideal For A Wide Range Of Applications, Including Diy Projects, Automotive Repairs, Woodworking, And More. This Hex Key Drill Bit Set Provides The Versatility You Need To Tackle Any Job..
Easy Identification And Use: Each Bit Is Clearly Marked With Laser Etching, Making It Easy To Identify The Size And Type Of Bit You Need. The Magnetic Feature Also Makes It Easier To Handle And Use The Bits Without Worrying About Them Slipping Out Of Place..
Features
- Precision and Durability: PTSLKHN hex driver set are made of high-quality S2 alloy steel, processed using CNC precision technology, and undergo a special heat treatment process that gives them a hardness of 58-60HRC. This ensures long-lasting durability and precision, even under heavy use.
- Easy Identification and Use: Each bit is clearly marked with laser etching, making it easy to identify the size and type of bit you need. The magnetic feature also makes it easier to handle and use the bits without worrying about them slipping out of place.
- Convenient Storage and Organization: The black phosphate treatment of the hex bits not only provides additional protection against corrosion but makes them easy to spot in your toolbox.
- 100mm long hex bit set: 10 pieces metric of 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm, 6mm, 7mm, 8 mm, is ideal for a wide range of applications, including DIY projects, automotive repairs, woodworking, and more. This hex key drill bit set provides the versatility you need to tackle any job.
- Satisfaction Guaranteed: We stand behind the quality and durability of our products, if you are not completely satisfied with your purchase and have any questions, please feel free to contact us! This means that you can buy with confidence, knowing that you're getting a high-quality product that's backed by a reputable company.
- See more on Amazon...
Brand: PTSLKHN | Manufacturer: PTSLKHN
Weight: 1.00 Pounds
See On Amazon #5
TEKTON 3/8 Inch Drive x 1 Inch Mini Extension | SHA11101
Asin: B0B1N7FG5V | Model: SHA11101 | PartNumber: SHA11101 | Ean: 0020209994436 | UPC: 020209994436
Beveled Drive End Helps Guide Extension Smoothly Onto Drive Tool.
Radiused Corners Inside The Drive Avoid Stress Concentrations That Can Cause Cracking.
Spring-Loaded Retaining Ball Latches Into Sockets And Holds Them Securely In Place.
Four Detent Grooves Offer A Secure Connection With The Drive Tool.
Polished, Chrome-Plated Finish Easily Wipes Clean And Is Highly Resistant To Corrosion.
Features
- Use the mini extension by itself in tight spaces or add it onto other extensions to achieve just the right amount of reach
- Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
- Beveled drive end helps guide extension smoothly onto drive tool
- Four detent grooves offer a secure connection with the drive tool
- Radiused corners inside the drive avoid stress concentrations that can cause cracking
- Spring-loaded retaining ball latches into sockets and holds them securely in place
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.70 x 1.10 x 0.70 inches
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #6
TEKTON 3/8 Inch Drive x 14 mm Hex Bit Impact Socket | SIB13214
Asin: B0D1Z2BCWP | Model: SIB13214 | PartNumber: SIB13214 | Ean: 0020209065099 | UPC: 020209065099
Permanent Connection – The Bit Is Pressed Directly Into The Socket For A Permanent Connection That Won't Loosen Over Time Or Under Stress.
Friction Ring Or Detent Pin Anvils – Smooth Walls Inside The Drive End And A Detent Pin Hole Make The Bit Sockets Compatible With Both Drive Tool Anvil Types.
Two Size Markings – The Size Is Marked With A High-Visibility Laser Marking And A Permanent Stamped Marking That Won't Rub Off.
Optimal Two-Piece Design – We Use Separate Steel Alloys And Processes For The Bit And Socket, Resulting In A Higher Performing Tool Than One-Piece Designs.
Features
- Precise Hex Geometry The six-sided hexagonal tip is machined to precise tolerances
- Optimal Two-Piece Design We use separate steel alloys and processes for the bit and socket, resulting in a higher performing tool than one-piece designs
- Permanent Connection The bit is pressed directly into the socket for a permanent connection that won't loosen over time or under stress
- Two Size Markings The size is marked with a high-visibility laser marking and a permanent stamped marking that won't rub off
- Friction Ring or Detent Pin Anvils Smooth walls inside the drive end and a detent pin hole make the bit sockets compatible with both drive tool anvil types
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.86 x 2.22 x 0.86 Inches | Weight: 0.23 Pounds
See On Amazon #7
Dytert 31-Piece Hex Key Set - Allen Wrench Set, SAE and Metric Allen Keys, MM(0.7mm-10mm) SAE(0.028"-3/8), Heat-Treated Steel, Torque Handle
Asin: B0BZTR3FGX | Ean: 0715748657941 | UPC: 715748657941
✅Comprehensive Set: The Set Includes 30 Pieces Of Hex Keys With 15 Pieces Of Long And Short Sae And Metric Sizes, Ensuring You Have The Right Size For Any Job..
✅ Precision And Comfort: Each Hex Key Features Precision Machining And A Chamfered Hexagonal End, Providing A Comfortable Fit, Smooth Insertion, And Hardware Protection Against Wear..
✅Increased Efficiency: The Plastic Box Features A Wrench For Added Torque, Improving Efficiency By 50%. It Also Has A Hanging Hole So That It Can Be Stored On The Wall..
✅Versatile Tool: The Hex Key Set Can Be Used To Assemble Or Disassemble Most Hex Nuts, Bicycles, Furniture, Machinery, And Equipment..
Features
- High-Quality Material: Made from heat-treated chrome vanadium steel, it offers excellent wear resistance, rust protection, and hardness up to 51-55HRC.
- Versatile Tool: The hex key set can be used to assemble or disassemble most hex nuts, bicycles, furniture, machinery, and equipment.
- Comprehensive Set: The set includes 30 pieces of hex keys with 15 pieces of long and short SAE and metric sizes, ensuring you have the right size for any job.
- Increased Efficiency: The plastic box features a wrench for added torque, improving efficiency by 50%. It also has a hanging hole so that it can be stored on the wall.
- Precision and Comfort: Each hex key features precision machining and a chamfered hexagonal end, providing a comfortable fit, smooth insertion, and hardware protection against wear.
- See more on Amazon...
Brand: Dytert | Manufacturer: Dytert
Dimensions: 1.42 x 9.45 x 7.10 inches
See On Amazon #8
TEKTON 3/8 Inch Drive x 3/16 Inch Long Hex Bit Socket | SHB12403
Asin: B07R8J7XPC | Model: SHB12403 | PartNumber: SHB12403 | Ean: 0020209024249 | UPC: 020209024249
Extra-Long Bits Allow You To Reach Deep Into Especially Narrow, Recessed Areas.
Beveled Inner Rim Of The Socket Opening Helps Guide It Smoothly Onto Fasteners.
Four Detent Grooves Provide A Secure Connection With The Drive Tool And A Drilled Through-Hole Allows Locking On With Retaining Pin.
Polished, Chrome-Plated Finish Easily Wipes Clean And Is Highly Resistant To Corrosion.
Large, Clear Die-Stamped Size Marking Is Easy To Read And Can’T Wear Off.
6-Sided Hexagonal Tip Is Machined To Precise Tolerances For An Exact Fit With Hex Fasteners.
Features
- S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
- 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners
- Extra-long bits allow you to reach deep into especially narrow, recessed areas
- Large, clear die-stamped size marking is easy to read and can t wear off
- Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin
- Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
- Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.80 x 6.00 x 0.80 Inches
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #9
TEKTON 8 mm Combination Wrench | 18277
Asin: B00Q01O86K | Model: 18277 | PartNumber: 18277 | Ean: 0020209182772 | UPC: 020209182772
Box End Opening Is Designed To Grip Flat Sides Of Fastener Heads, Not Corners, To Prevent Round-Off.
Made Of Premium Chrome Vanadium Steel With A Mirror Chrome Finish.
12-Point Box End Doubles The Access Angles Of A 6-Point And Is Offset 15 Degrees To Create Clearance For Fingers.
Features
- Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces
- 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers
- Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off
- Made of premium chrome vanadium steel with a mirror chrome finish
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.30 x 5.60 x 0.70 Inches | Weight: 0.08 pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #10
TEKTON 8 mm Short Arm Ball End Hex L-Key | KLX87080
Asin: B0CK2RH855 | Model: KLX87080 | PartNumber: KLX87080 | Ean: 0020209067024 | UPC: 020209067024
Tight Fit With Fasteners – We Precisely Manufacture Our Hex Key Geometry On The Large End Of The Applicable Range, Resulting In Less Slop In Fasteners.
Markings And Finish – Each Key Is Marked With A High-Visibility Size Indicator That Can't Wear Off And Finished With A Manganese Phosphate Coating That's Highly Resistant To Corrosion.
20-Degree Ball End – Our Keys Implement A Steep Ball End Angle, Which Increases Your Ability To Access Fasteners While Still Maintaining Sufficient Strength.
High Leverage – Our L-Keys Are Longer In Overall Length Compared To Competitors, Providing Increased Leverage Where It Matters.
Features
- Short Arm for Access The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control
- High Leverage Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters
- Tight Fit with Fasteners We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners
- 20-Degree Ball End Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength
- Markings and Finish Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.40 x 8.20 x 0.90 inches | Weight: 0.21 Pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #11
TEKTON Ball End Hex Key Wrench Set, 13-Piece (1.27-10 mm) | 25272
Asin: B00I5THFR4 | Model: 25272 | PartNumber: 25272 | Ean: 0020209252727, 7147905966345, 0077346814233, 0756635819387, 0074994356160 | UPC: 756635819387, 020209252727, 077346814233, 074994356160
Red Color-Coded Housing For Instant Identification Of Metric Sized Hex Keys.
High Visibility Sizes Marked On Case For Fast Size Selection.
Hinged Case Opens Flat, Making It Easier To Get Wrenches In And Out.
Precisely-Sized, Chamfered Ends Insert Smoothly Into Fastener Head, Reducing Wear.
Features
- Heat treated chrome vanadium steel with black-oxide finish
- Precisely-sized, chamfered ends insert smoothly into fastener head, reducing wear
- Red color-coded housing for instant identification of Metric sized hex keys
- Hinged case opens flat, making it easier to get wrenches in and out
- High visibility sizes marked on case for fast size selection
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 1.00 x 7.00 x 2.80 Inches | Weight: 0.97 Pounds
Warranty: No time limits, no receipts: tekton.com/tool-help
See On Amazon #12
GEARWRENCH 17 Piece SAE/Metric Ball End Folding Hex Key Set - 83511
Asin: B098V1XKXY | Model: 83511 | PartNumber: 83511 | Ean: 0099575835117 | UPC: 099575835117
Handle Constructed From Dual Material And Designed For Comfort.
Keys Rotate 270 Degrees For Greater Access And Torque.
Chamfered Edges On Both Ends Help Guide The Key Into The Fastener Smoothly And Quickly.
Features
- Keys made with alloy steel for maximum strength and to resist rotational distortion
- Chamfered edges on both ends help guide the key into the fastener smoothly and quickly
- Handle constructed from dual material and designed for comfort
- Keys rotate 270 degrees for greater access and torque
- See more on Amazon...
Brand: GEARWRENCH | Manufacturer: Apex Tool Group
Weight: 0.71 Pounds
Warranty: Standard Limited Lifetime
See On Amazon #13
TEKTON 1/4 Inch Drive x 8 mm 6-Point Socket | SHD02108
Asin: B07R431ZJ8 | Model: SHD02108 | PartNumber: SHD02108 | Ean: 0020209025871 | UPC: 020209025871
Standard-Length Socket Is Relatively Versatile And Suitable For A Wide Range Of Applications.
Beveled Inner Rim Of The Socket Opening Helps Guide It Smoothly Onto Fasteners.
Polished, Chrome-Plated Finish Easily Wipes Clean And Is Highly Resistant To Corrosion.
Four Detent Grooves Provide A Secure Connection With The Drive Tool.
Extra-Large Die-Stamped Size Markings Are Easy To Read And Can’T Wear Off.
Socket Geometry Is Designed To Apply Force To Flat Sides Of Fasteners And Not The Corners, Preventing Round-Off.
Features
- 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads
- Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off
- Standard-length socket is relatively versatile and suitable for a wide range of applications
- Extra-large die-stamped size markings are easy to read and can t wear off
- Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
- Four detent grooves provide a secure connection with the drive tool
- Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.50 x 1.00 x 0.50 inches | Weight: 0.03 Pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #14
GETLITOOL 13PCS Allen Key Set, 6150Cr-V Metric Allen Wrench Set 1.27-10mm, Long Ball End Hex Key L-key Set with Size-Marked & Storage Bracket for Bicycle Repair, Appliance Maintenance
Asin: B0BJPK3J72 | Model: GET005-DEF | PartNumber: GET005-DEF
【Ball & Flat Head Design】The Ball End Design Entry Angle Up To 25 Degree For Easily Reach Hard-To-Reach Areas. The Flat Head Design Has Larger Force-Receiving Area And More Torque..
【Easy To Carry】Storage Bracket Is Made Of Abs Plastic, Which Is Not Easy To Break. The Clearly Visible Dimensions On The Bracket Make It Easy To Select And Replace The Correct Wrench. And The Bracket Has Hanging Holes For Easy Storage..
【Wide Range Of Uses】Getlitool Allen Wrench Is Perfect For Diy Repairs Of Electronics, Bikes, Electrical Work, Machinery, Automobile And Motorcycle. It Is The Wonderful Gift For Family And Friend！.
【Bright Coating & & Size Marked】The Surface Of The Allen Keys Sets Is Treated With Brightly Chrome And Powder Coating, Anti-Slip, Not Easily Scratched. Each Key Is Size Marked For Fast Selection..
【Full Choices-13 Piece】The Metric Allen Key Has 13 Pieces In Different Sizes: 1.27, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 8.0, 10Mm, Suitable For All Kind Of Scenarios To Meet The Repair Needs Of Your Life And Work..
Features
- EXCELLENT QUALITY GETLITOOL Allen Key Set are Manufactured from Hardened and Heat Treated 6150 Chrome Vanadium Steel, Not Easy to Break. Polished Finish and Chrome Plated for Protection Against Corrosion and Anti-rust, Durable for Long Time Use.
- FULL CHOICES-13 PIECE The Metric Allen Key Has 13 Pieces in Different Sizes: 1.27, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 8.0, 10mm, Suitable for All Kind of Scenarios to Meet The Repair Needs of Your Life and Work.
- BALL & FLAT HEAD DESIGN The Ball End Design Entry Angle Up to 25 Degree for Easily Reach Hard-to-reach Areas. The Flat Head Design Has Larger Force-receiving Area and More Torque.
- BRIGHT COATING & & SIZE MARKED The Surface of the Allen Keys Sets is Treated with Brightly Chrome and Powder Coating, Anti-slip, Not Easily Scratched. Each Key is Size Marked for Fast Selection.
- EASY TO CARRY Storage Bracket is Made of ABS Plastic, Which is Not Easy to Break. The Clearly Visible Dimensions On The Bracket Make It Easy to Select and Replace The Correct Wrench. And The Bracket Has Hanging Holes for Easy Storage.
- WIDE RANGE OF USES GETLITOOL Allen Wrench Is Perfect for DIY Repairs of Electronics, Bikes, Electrical Work, Machinery, Automobile and Motorcycle. It Is The Wonderful Gift for Family and Friend
- See more on Amazon...
Brand: GETLITOOL | Manufacturer: GETLITOOL
Dimensions: 1.10 x 7.28 x 3.15 inches | Weight: 0.85 Pounds
See On Amazon #15
Kingsdun 30 Pcs Hex Key Set Metric/Imperial Short/Long Arm | SAE 0.028-3/8 inch | Metric 0.7-10 mm | Steel Allen Wrench Key for Furniture Assembly Bike Maintenance Disassemble Install Cars
Asin: B07WRP9SFH | Ean: 0728370450279 | UPC: 728370450279
🎧 Made Of Heat-Treated Steel: The Wrenches Are Made Of Heat-Treated Steel And Provide Years Of Stability. Precision-Sized Ends Are Chamfered To Easily Slide Into Fasteners, Reducing Key Wear And Damage To The Tightening Head. Hex Keys Are Manufactured To Bs Standards Using Chrome-Vanadium Steel To Withstand Tough Working Conditions And High Levels Of Force, Then Heat Treated With A Black Oxide Chrome To Resist Corrosion..
🎉 Folding Storage Case: Unique Hinged Storage Case Opens Flat, Making It Easier To Drive In Or Out. High Visibility Sizes Are Marked On The Case For Fast Size Selection. Use The Hang Hole At The Back To Hang Your Keys On Your Tool Shelf Or Wall Or Take Advantage Of The Set's Compact Size And Store It Anywhere You Want..
🛠️ Application: The Hex Key Use To Release And Tighten Fasteners, They're Perfect For Working On Bicycle Repair Maintenance, Furniture Installation, Tightening Door Handles, And Adjusting Bikes Or Bookshelves - All Can Benefit From A Reliable And Versatile Set Of Hex Keys..
⌚ Flat Ball Design: The Hex Keys Set Can Easily Remove And Install Most Socket Cap Screws Found In Cars, Furniture, Equipment And More. Allowing Easier Access To Those Hard-To-Reach Spaces And Making It Easy For Adjusting In All Angles. This 30 Piece Hex Key Set Completely Covers All Hexagonal Screws And Contains Both Long And Short-Arm Sae And Metric Measurements For Limitless Applications Around The Home, Garage And Garden..
Features
- ALLEN WRENCHES SET: This 30-piece allen wrench set includes 15 SAE and 15 metric keys covering SAE sizes 0.028, 0.035, 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8in. And metric sizes 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8, 10mm.
- FLAT BALL DESIGN: The hex keys set can easily remove and install most socket cap screws found in cars, furniture, equipment and more. Allowing easier access to those hard-to-reach spaces and making it easy for adjusting in all angles. This 30 piece Hex Key set completely covers all hexagonal screws and contains both long and short-arm SAE and Metric measurements for limitless applications around the home, garage and garden.
- MADE OF HEAT-TREATED STEEL: The wrenches are made of heat-treated steel and provide years of stability. Precision-sized ends are chamfered to easily slide into fasteners, reducing key wear and damage to the tightening head. Hex Keys are manufactured to BS standards using Chrome-Vanadium steel to withstand tough working conditions and high levels of force, then heat treated with a black oxide chrome to resist corrosion.
- APPLICATION: The hex key use to release and tighten fasteners, They're perfect for working on bicycle repair maintenance, furniture installation, tightening door handles, and adjusting bikes or bookshelves - All can benefit from a reliable and versatile set of hex keys.
- FOLDING STORAGE CASE: Unique hinged storage case opens flat, making it easier to drive in or out. High visibility sizes are marked on the case for fast size selection. Use the hang hole at the back to hang your keys on your tool shelf or wall or take advantage of the set's compact size and store it anywhere you want.
- See more on Amazon...
Brand: Kingsdun | Manufacturer: Kingsdun
See On Amazon #16
GEARWRENCH 3/8" Drive Long Ball End Hex Bit Socket, 8mm - 80446
Asin: B002YK7XE0 | Model: 80446 | PartNumber: 80446 | Ean: 0099575804465 | UPC: 099575804465
Bits Made Of S2 Steel For Strength And Durability.
6" Overall Length.
Features
- Ball end allows up to a 25 entry angle to work in hard to reach places
- 6 overall length
- Bits made of S2 steel for strength and durability
- See more on Amazon...
Brand: GEARWRENCH | Manufacturer: GearWrench
Dimensions: 0.69 x 8.35 x 1.69 Inches | Weight: 0.15 Pounds
See On Amazon #17
TEKTON 8 mm Ratcheting Combination Wrench | WRN53108
Asin: B01F511IY0 | Model: WRN53108 | PartNumber: WRN53108 | Ean: 0020209006429 | UPC: 020209006429
72-Tooth Ratchet Gear Needs Only A 5-Degree Working Swing Arc.
Open End Is Angled 15 Degrees So The Wrench Can Be Flipped Over To Engage Fasteners Twice As Often In Tight Spaces.
Box End Opening Is Designed To Grip Flat Sides Of Fastener Heads, Not Corners, To Prevent Round-Off.
Features
- 6-point box end snugly fits hex-shaped fastener heads and resists slipping off while you work
- Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off
- 72-tooth ratchet gear needs only a 5-degree working swing arc
- Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.30 x 5.30 x 0.70 Inches | Weight: 0.08 Pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #18
8mm Ball End L-Wrench Tagged & Barcoded
Asin: B000VYH3VE | Model: 15772 | PartNumber: 15772 | Ean: 0787721594352, 0037231157722 | UPC: 037231157722, 787721594352
8Mm Ball End L-Wrench Tagged & Barcoded.
8Mm Ball End L-Wrench Tagged & Barcoded.
8Mm Ball End L-Wrench Tagged & Barcoded.
8Mm Ball End L-Wrench Tagged & Barcoded.
Features
- 8mm Ball End L-Wrench Tagged & Barcoded
- 8mm Ball End L-Wrench Tagged & Barcoded
- 8mm Ball End L-Wrench Tagged & Barcoded
- 8mm Ball End L-Wrench Tagged & Barcoded
- 8mm Ball End L-Wrench Tagged & Barcoded
- See more on Amazon...
Brand: Bondhus | Manufacturer: Bondhus
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.00 Pounds
See On Amazon #19
Kozelo 2pcs 6 Point Deep Socket - [3/8 Inch x 8mm] Square Drive for Car Mechanical Equipment Repair Use, CR-V Steel Metric Sizes
Asin: B0BHNVWCLH | Model: klf220728zz0003 | PartNumber: klf220728zz0003
3- Application - Widely Used In Car, Mechanical, Equipment Maintenance, And Other Most General Repairs..
5- Usage - Used To Remove And Tighten Hex Head Bolt And Nut Fasteners..
4- Radius Corner - Designed To Apply Force To Flat Sides Of Fasteners And Not The Corners, Preventing Round-Off..
2- Material - Manufactured From Chrome-Vanadium Steel And Heat Treated For Added Strength And Wear Protection. Polished Chrome Plated Finish Gives Smooth Surface And Prevents Rust And Corrosion..
Features
- 1- PACKAGE CONTENTS - 2pcs 3/8" Drive 8mm 6 point deep socket.
- 2- MATERIAL - Manufactured from chrome-vanadium steel and heat treated for added strength and wear protection. Polished chrome plated finish gives smooth surface and prevents rust and corrosion.
- 3- APPLICATION - Widely used in car, mechanical, equipment maintenance, and other most general repairs.
- 4- RADIUS CORNER - Designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
- 5- USAGE - Used to remove and tighten hex head bolt and nut fasteners.
- See more on Amazon...
Brand: Kozelo | Manufacturer: Kozelo
See On Amazon
Looking For Something Else?
Search