Drill America DWDDL8X11/32 11/32" x 8" High Speed Steel Extra Long Drill Bit, DWDDL Series (Pack of 2)
Asin: B0CDNMVM9J | Model: DWDDL8X11/32 | PartNumber: DWDDL8X11/32
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
High-Speed Steel Tools Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- The information below is per-pack only
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon Similar To Drill America DWDDL8X11 32 11
#1
Owl Tools 11/32" Cobalt Drill Bits - 3 Pack - 5" Inch Length - M35 Cobalt Drill Bits with Storage Case - Perfect Drill Bits for Metal, Hardened & Stainless Steel, Cast Iron, and More!
Asin: B0CHG37114 | Ean: 0810147650002 | UPC: 810147650002
Plastic Storage Case Included - Incredibly Tough And Durable Plastic Case. Perfect For Keeping Your Cobalt Drill Bits Neatly Organized And Safe..
Lifetime Guarantee - Here At Owl Tools (Usa Based Company) We Only Care About Your Satisfaction. We Try Our Best To Ensure Each Product Is In Perfect Condition Before You Get It, But If Something Is Not Up To Your Satisfaction, Please Contact Us For A Full Refund Or Replacement..
Cobalt Drill Bits Are The Perfect Drill Bits For Metal - As Well As Other Hard Materials Such As Stainless Steel, Hardened Steel, Cast Iron, Bronze, Titanium, And More!.
M35, Fully Ground, 135° Split Point - Our Drill Bits Contain 5% Cobalt, Are Fully Grounded For A Precision Drilling Diameter. 135° Split Point Design Makes It Easier To Drill Repeated Holes In Harder Materials..
Features
- 3 PACK OF 11/32" COBALT DRILL BITS - 11/32" Diameter with a Flute Length of 3" and Total length of 5"
- M35, FULLY GROUND, 135 SPLIT POINT - Our Drill Bits Contain 5% Cobalt, Are Fully Grounded for a Precision Drilling Diameter. 135 Split Point Design Makes it Easier to Drill Repeated Holes in Harder Materials.
- PLASTIC STORAGE CASE INCLUDED - Incredibly Tough and Durable Plastic Case. Perfect for Keeping Your Cobalt Drill Bits Neatly Organized and Safe.
- COBALT DRILL BITS ARE THE PERFECT DRILL BITS FOR METAL - As well as other hard materials such as Stainless Steel, Hardened Steel, Cast Iron, Bronze, Titanium, and More!
- LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
- See more on Amazon...
Brand: Owl Tools | Manufacturer: Owl Tools
See On Amazon #2
BOSCH BL2149 1-Piece 11/32 In. x 4-3/4 In. Fractional Jobber Black Oxide Drill Bit for Applications in Light-Gauge Metal, Wood, Plastic
Asin: B0002EVF9Y | Model: BL2149 | PartNumber: BL2149 | Ean: 0000346331424 | UPC: 000346331424
Easier Drilling, Reduced Heat And Extended Drill Bit Life.
For Use In Steel, Copper, Aluminum, Brass, Oak, Maple, Mdf, Pine, Pvc, Polycarbonate, Acrylic, Abs, Nylon And Composite Materials.
Available In Jobber Length, Stubby Length, Extended Length (Aircraft), 1/2 In. Reduced Shank (Silver And Deming).
Last 50 Percent Longer Than High-Speed Steel.
Features
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
- See more on Amazon...
Brand: BOSCH | Manufacturer: Bosch
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 Pounds
Warranty: No
See On Amazon #3
DelitonGude 11/32 inch HSS M35 Cobalt Twist Drill Bits,High Speed Steel,Pack of 5,Suitable for Steels,Cast Iron,Stainless Steels and Other hardMetals(11/32inch)
Asin: B0BYC1GV3L
Full-Grinding Nitriding,Good Wear Resistance,Durable,Spiral Groove Design, Well Chip Removal Performance.135 Tip & Twist Design,Increases Cutting Speed With Self-Centering And Prevents Walking..
Works Great And Good Price, Will Be A Good Assistant In Your Work.
For Professional And Diy Use, Household Maintenance And Repair.These Are So Good To Save Times.
The Blades Are Very Sharp And They Drill Into Metal Fast.Including Steels,Cast Iron ,Copper,Galvanized Pipe,Aluminum Alloy,Wood, Plastic And Other Hard Metals.If You Need To Drill Hard Metal, Highly Recommended Use Drilling Press Contral The Rpm.Not For Glass Or Ceramic Materials..
Features
- Great product and very good quality. Made from M35 Hight-speed Steel and 5% Cobalt.Size:11/32inch,Total length:125mm,Work length:80mm.
- The blades are very sharp and they drill into metal fast.Including Steels,Cast Iron ,Copper,Galvanized Pipe,Aluminum Alloy,Wood, Plastic and Other Hard Metals.If you need to drill hard metal, Highly recommended use drilling press contral the RPM.Not for Glass or Ceramic Materials.
- Full-grinding Nitriding,Good Wear resistance,Durable,Spiral groove design, well chip removal performance.135 Tip & Twist Design,Increases cutting speed with self-centering and prevents walking.
- For Professional and DIY Use, household maintenance and repair.These are so good to save times
- Works great and good price, Will be a good assistant in your work
- See more on Amazon...
Brand: DelitonGude | Manufacturer: Gude Precision tools
Weight: 0.22 Pounds
See On Amazon #4
DRILLFORCE10-piece 11/32" Round Shank HSS Titanium Coated Twist Drill Bits for Metal (11/32)
Asin: B0798GG7RL
Package & Size: 10 Pieces In A Plastic Bag, Diameter 11/32 Inch, Total Length 4-3/4 Inch, Working Length 3-7/16 Inch..
135 Tip & Twist Design: Increases Cutting Speed With Self-Centering And Prevents Walking, Clears Chips And Particles Faster..
Professional & Diy Use: For Use On Metal, Wood & Plastics, Not For Use On Concrete / Masonry / Stainless Steel. Perfect Match For Workshop Or Service Vehicles..
Strength & Hardness: Made With Hss 4241 Steel, Rock Wall Hardness Level Hrc 60-62..
Features
- Titanium Coated: Classic 4241 High Speed Steel construction with Titanium Coating for proven capability and durability.
- Strength & Hardness: Made with HSS 4241 steel, Rock wall Hardness Level HRC 60-62.
- Package & Size: 10 Pieces in a plastic bag, Diameter 11/32 inch, Total length 4-3/4 inch, Working length 3-7/16 inch.
- Professional & DIY Use: For use on metal, wood & plastics, Not For Use On Concrete / Masonry / Stainless Steel. Perfect match for workshop or service vehicles.
- 135 Tip & Twist Design: Increases cutting speed with self-centering and prevents walking, clears chips and particles faster.
- See more on Amazon...
Brand: DRILLFORCE | Manufacturer: DRILLFORCE
Weight: 0.81 Pounds
See On Amazon #5
Drill America 11/32" Quick Change Cobalt Drill Bit with Hex Shank, COHEX Series
Asin: B0BTTNC1R5 | Model: COHEX11/32 | PartNumber: COHEX11/32 | Ean: 0887861309554 | UPC: 887861309554
135 Degree Split Point Tip For Self-Centering And Reducing Thrust; Compared To A Conventional 118 Degree Tip, These Drills Wont Go "Walking" On You.
Manufactured To National Aerospace Standard 907.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
1/4 In. Hex Shank Can Be Used In Quick Change Impact Drivers.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 1/4 in. hex shank can be used in quick change impact drivers
- 135 degree split point tip for self-centering and reducing thrust; Compared to a conventional 118 degree tip, these drills wont go walking on you
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Manufactured to National Aerospace standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #6
DEWALT 11/32 in. Pilot Point Drill Bi
Asin: B00004YMEU | Model: DW1922 | PartNumber: DW1922 | Ean: 5448095489785, 0028877323978, 7535001112887 | UPC: 028877323978
Tapered Web Provides Greater Durability To Reduce Breaking.
No-Spin Shank Eliminates The Frustration Of Bit Spinning In The Chuck.
Features
- Pilot Point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough
- No-spin shank eliminates the frustration of bit spinning in the chuck
- Tapered web provides greater durability to reduce breaking
- See more on Amazon...
Brand: DEWALT | Manufacturer: DEWALT
Dimensions: 0.38 x 6.75 x 1.87 inches | Weight: 0.10 Pounds
See On Amazon #7
Drill America 11/32" High Speed Steel Black & Gold KFD Split Point Drill Bit with 3-Flat Shank (Pack of 6), KFDML Series
Asin: B00FXN6XSW | Model: KFDML11/32P6 | PartNumber: KFDML11/32P6 | Ean: 0887861206709 | UPC: 887861206709
These Round Shank Tools Have Flats Ground Onto Three Sides To Reduce Slippage Of The Bit When Used In Drill Chucks.
Heavy Duty 135 Split Point For Self-Centering And Reducing Thrust.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold And Black Surface Treated For Use In Stainless Steel And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Heavy duty 135 split point for self-centering and reducing thrust
- See more on Amazon...
First Available: 05/15/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.99 Pounds
See On Amazon #8
Drill America - DWDA/CX1211/32 11/32" x 12" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B2QY5KW | Model: DWDA/CX1211/32 | PartNumber: DWDA/CX1211/32 | Ean: 0887861044523 | UPC: 887861044523
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 5.98 x 5.98 x 5.98 inches | Weight: 0.31 pounds
See On Amazon #9
Drill America DWDDL8X11/32 11/32" x 8" High Speed Steel Extra Long Drill Bit, DWDDL Series
Asin: B00FXHNSPY | Model: DWDDL8X11/32 | PartNumber: DWDDL8X11/32 | Ean: 0887861060578 | UPC: 887861060578
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #10
Drill America - GLBCOX1211/64 11/64" x 12" Cobalt Aircraft Extension Drill Bit, GLBCO Series
Asin: B00B2QWZLI | Model: GLBCOX1211/64 | PartNumber: GLBCOX1211/64 | Ean: 0887861046251 | UPC: 887861046251
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
12" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 12 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 2.01 Pounds
See On Amazon #11
Drill America KFD11/32P6 11/32" High Speed Steel Black & Gold KFD Split Point Drill Bit (Pack of 6), KFD Series
Asin: B00FXN1W4W | Model: KFD11/32P6 | PartNumber: KFD11/32P6 | Ean: 0887861206150 | UPC: 887861206150
135° Split Point Tip Prevents Drill From "Walking".
Black And Gold Drills Are Manufactured From Premium Grade High Speed Steel.
Combination Of Hardness And Toughness For Wear Resistance.
For Use In Wood, Metal, Stainless And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- For use in wood, metal, stainless and other hard metal drilling
- 135 split point tip prevents drill from walking
- Combination of hardness and toughness for wear resistance
- Black and gold drills are manufactured from premium grade high speed steel
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #12
Drill America - DWDA/CX611/32 11/32" x 6" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B1C8GDO | Model: DWDA/CX611/32 | PartNumber: DWDA/CX611/32 | Ean: 0887861043366 | UPC: 887861043366
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 Pounds
See On Amazon #13
MAXTOOL 11/32" 2pcs Identical Jobber Length Drills HSS M2 Twist Drill Bits Fully Ground Black & Bronze Straight Shank Drills; JBF02H10R22P2
Asin: B085GLBFQQ | Model: JBF02H10R22P2 | PartNumber: JBF02H10R22P2 | Ean: 0634301943638 | UPC: 634301943638
Fully Ground Process Ensures Excellent Chips Moving, And 135 Deg Chisel Angle With Split Point Provide Accuracy Start For Quick Penetration Without Walking And Less Logging.
Jobber Length Twist Drill Bits With Straight Shank For Cutting Metal, Plastic, And Wood Etc; 1/64” To 17/64” Are Available.
Precision Treatment Makes Drills Durable Toughness, Withstands Heavy Duty Operation, Resists Corrosion And Lubricates The Drill Bits Better For Cutting Smoothly.
All Drill Dimensional & Tolerances Conform To Asme/Ansi B94.11M Drill Standards Or Uscti - United States Cutting Tool Institute (Formerly Mcti).
Features
- Quality high speed steel ensures the bits super hard, sharp and cutting effectively with impressive cutting performance in metal, plastic, and wood etc with long tool life
- All drill dimensional & tolerances conform to ASME/ANSI B94.11M drill standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging
- Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly
- Jobber Length Twist Drill Bits with Straight Shank for cutting metal, plastic, and wood etc; 1/64 to 17/64 are available
- See more on Amazon...
Brand: MaxTool | Manufacturer: TianShun Tool
Dimensions: 0.35 x 4.83 x 0.35 inches | Weight: 169.00 Grams
See On Amazon #14
2PCS 11/32 inch, HSS Twist Drill Bits, Black and Gold Finish, Jobber Length Metal Drill (11/32 inch)
Asin: B07B5W27RX | Ean: 6971141016325
【2 Pcs】Diameter From 5/16 Inch To 1/2 Inch,.
【A Perfect Match For】: Workshop Or Service Vehicles.
【Professionals & Diy Use】: For Use On Metal, Wood & Plastics (Not For Use On Concrete / Masonry).
【Strength & Durability】: Made With Hss M2, Rockwall Hardness Level Hrc60-65.
Features
- Black and Gold | HIGH-SPEED STEEL : Classic High-Speed Steel Construction With Black and Gold Coating For Proven Capability And Durability
- STRENGTH & DURABILITY : Made With HSS M2, Rockwall Hardness Level HRC60-65
- 2 PCS Diameter from 5/16 inch to 1/2 inch,
- PROFESSIONALS & DIY USE : For Use On Metal, Wood & Plastics (Not For Use On Concrete / Masonry)
- A PERFECT MATCH FOR : Workshop or Service Vehicles
- See more on Amazon...
Brand: OXTUL | Manufacturer: oxtul
Weight: 0.25 Pounds
See On Amazon #15
BOSCH TI2149 1-Piece 11/32 In. x 4-3/4 In. Titanium Nitride Coated Metal Drill Bit with 3/8 In. Reduced Shank for Applications in Heavy-Gauge Carbon Steels, Light Gauge Metal, Hardwood
Asin: B000HS1F6S | Model: TI2149 | PartNumber: TI2149 | Ean: 0000346332995 | UPC: 000346332995
Balanced Double Flute Eliminates Chatter And Vibration.
Drills Clean, Accurate Holes In These Thin Materials (Up To 1/8 In.): Sheet Metal, Ducts, Steel, Copper, Brass, Aluminum, Plastic, Plexiglass, Wood, Veneers, Vinyl Siding, Plasterboard, Pvc, Stainless Steel And Cast Iron.
Titanium Reduces Heat For Longer Life.
Self-Starting Point Starts On Contact.
Features
- Super-hard titanium coating lasts up to six times longer than high-speed steel
- Self-starting point starts on contact
- Balanced double flute eliminates chatter and vibration
- Titanium reduces heat for longer life
- Drills clean, accurate holes in these thin materials (up to 1/8 In.): sheet metal, ducts, steel, copper, brass, aluminum, plastic, Plexiglass, wood, veneers, vinyl siding, plasterboard, PVC, stainless steel and cast iron
- See more on Amazon...
Brand: BOSCH | Manufacturer: Bosch
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.10 Pounds
Warranty: No
See On Amazon #16
Drill America 1-11/32" Reduced Shank High Speed Steel Drill Bit with 1/2" Shank, DWDRSD Series
Asin: B00FXI9OR4 | Model: DWDRSD1-11/32 | PartNumber: DWDRSD1-11/32 | Ean: 0887861034456 | UPC: 887861034456
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Low And Medium Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in low and medium tensile strength materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 1.50 x 6.60 x 1.60 Inches | Weight: 1.00 pounds
See On Amazon #17
MAXTOOL 11/32" 2pcs Identical Screw Machine Drills HSS M2 Twist Stub Drill Bits Black & Bronze Fully Ground Straight Shank Short Drills; SMF02H10R22P2
Asin: B085GL1XJQ | Model: SMF02H10R22P2 | PartNumber: SMF02H10R22P2 | Ean: 0634301939587 | UPC: 634301939587
Fully Ground Process Ensures Excellent Chips Moving, And 135 Deg Chisel Angle With Split Point Provide Accuracy Start For Quick Penetration Without Walking And Less Logging.
Stub Drills Were Developed For Screw Machine Operations Where Regular Drills Are Too Long For Small Spaces; The Short Length Reduces Breakage And Runout.
Precision Treatment Makes Drills Durable Toughness, Withstands Heavy Duty Operation, Resists Corrosion And Lubricates The Drill Bits Better For Cutting Smoothly.
All Drill Dimensional & Tolerances Conform To Asme/Ansi B94.11M Drill Standards Or Uscti - United States Cutting Tool Institute (Formerly Mcti).
Features
- Quality high speed steel ensures the bits super hard, sharp and cutting effectively with impressive cutting performance in metal, plastic, and wood etc with long tool life
- All drill dimensional & tolerances conform to ASME/ANSI B94.11M drill standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging
- Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly
- Stub Drills were developed for screw machine operations where regular drills are too long for small spaces; The short length reduces breakage and runout
- See more on Amazon...
Brand: MaxTool | Manufacturer: TianShun Tool
Dimensions: 0.35 x 3.08 x 0.35 Inches | Weight: 113.00 Grams
See On Amazon #18
Irwin Tools 81132 No. 32 Bright 118-Degree Jobber Lengthier, Pack of 5
Asin: B00BRGL38Y | Model: 81132 | PartNumber: 81132 | Ean: 0024721811325 | UPC: 024721811325
For Use In Wood, Metal, And Plastic.
Standard 118 Degree Point.
Features
- Constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance
- Standard 118 degree point
- for use in wood, metal, and plastic
- See more on Amazon...
Brand: IRWIN | Manufacturer: IRWIN
Dimensions: 0.45 x 6.25 x 2.00 inches | Weight: 0.04 Pounds
Warranty: Warranty
See On Amazon #19
Drill America 11/32" High Speed Steel Black Oxide Drill Bit (Pack of 6), DWDN Series
Asin: B00FXI3YWU | Model: DWDN11/32P6 | PartNumber: DWDN11/32P6 | Ean: 0887861192682 | UPC: 887861192682
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Production, Maintenance Or Portable Drilling Jobs.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for production, maintenance or portable drilling jobs
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #20
Drill America 11/32" High Speed Steel Split Point Drill Bit (Pack of 6), D/ASP Series
Asin: B00FX96HJQ | Model: D/ASP11/32P6 | PartNumber: D/ASP11/32P6 | Ean: 0887861195300 | UPC: 887861195300
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
These Drill Is Ideal For Portable Or Machine Drilling Of Low Tensile Strength Alloy Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- These drill is ideal for portable or machine drilling of low tensile strength alloy materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon
Looking For Something Else?
Search