AUTO DN Front Left CV Axle Shaft CV Joint CV Drive Shaft Assembly Driver Side For Honda Civic 2014 2015
Asin: B0CF4CCC7Q | Model: DSAZ230807006587 | PartNumber: DSAZ230807006587
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Important Note: Please Use Amazon's Vehicle Fitment Tool First To Confirm If The Part Is Correct For Your Vehicle.
1 Front Left Cv Axle Assembly.
Features
- Front CV Shaft Front Drive Axle Front CV Axle Front Axle Shaft Front CV Joint Front Left CV Axle Front Left Axle Left CV Axle Driver Side CV Axle Driver Side Axle Front Driver Side Axle For Honda Civic 2014 2015
- 1 Front Left CV Axle Assembly
- Important Note: Please use Amazon's vehicle fitment tool first to confirm if the part is correct for your vehicle
- See more on Amazon...
Brand: AUTO DN | Manufacturer: AUTO DN
Warranty: 12 month
See On Amazon Similar To AUTO DN Front Left CV
#1
Zlirfy Brake Caliper Piston Rewind Tool,Car Accessories Car Rear Brake Pad Wind Back Tool for Disk Brake Pad,Right Handle Set Brake Caliper Wind Back Tool for Replacement of Rear Brake Pad
Asin: B0CF4BHJ7K | Model: 786DSSCFBTZZ002 | PartNumber: 786DSSCFBTZZ002
[Product Specification]The Distance Between The Adapter Board And The Center Of The Pin Is Approximately 22 Millimeters To 32 Millimeters..
[Applicable] The 3-Piece Brake Caliper Rewinding Tool Is Suitable For Most Disc Brake Calipers Installed On Right-Hand Threaded Vehicles, And Is Suitable For Most Domestic And Imported Cars With Right-Hand Threads..
[Easy To Use] The Retractable Tool For The Rear Brake Pads Of Automobiles Is Convenient To Use, And There Are Retractable Pistons On Both The Left And Right Threaded Piston Calipers. Easy To Operate..
[Function] Use A T-Shaped Handle Or Outer Hexagonal Head 19 For Operation, Used To Reset The Brake Piston When Replacing The Brake Pads..
Features
- [Durable Material] The brake caliper piston winding tool is made of chrome vanadium steel, which is hard and not easy to break, has high reliability and practicality, is durable, and has a long service life.
- [Function] Use a T-shaped handle or outer hexagonal head 19 for operation, used to reset the brake piston when replacing the brake pads.
- [Product Specification]The distance between the adapter board and the center of the pin is approximately 22 millimeters to 32 millimeters.
- [Easy to Use] The retractable tool for the rear brake pads of automobiles is convenient to use, and there are retractable pistons on both the left and right threaded piston calipers. Easy to operate.
- [Applicable] The 3-piece brake caliper rewinding tool is suitable for most disc brake calipers installed on right-hand threaded vehicles, and is suitable for most domestic and imported cars with right-hand threads.
- See more on Amazon...
Brand: Zlirfy | Manufacturer: Zlirfy
Warranty: no
See On Amazon #2
GSP NCV10235 CV Axle Shaft Assembly - Left Front (Driver Side)
Asin: B001B083JS | Model: NCV10235 | PartNumber: NCV10235 | Ean: 0883331102359 | UPC: 883331102359
Assembled With A Specially Formulated, High-Temperature Moly Grease That Resists Friction And Wear, Contributing To A Lifetime Of Smooth, Dependable Performance.
Chevrolet: 2000-07 Monte Carlo, 1999-05 Venture; Pontiac: 2000-04 Bonneville, 1997-08 Grand Prix, 1999-05 Montana.
Left Front (Driver Side); 22-1/16 Inch Compressed Length; 33 Spline Outer Joint; 34 Spline Inner Joint. Ibj Type: Female.
For Select Gm Vehicles (Verify Fitment Details With Fit Checker Above): Buick: 2000-05 Century, 2005-09 Lacrosse, 2000-05 Lesabre, 2006-11 Lucerne, 1997-05 Park Avenue, 1997-04 Regal, 1997-99 Riviera; Chevrolet: 2000-11 Impala.
All Axles Are Thoroughly Inspected For Quality And Workmanship, And Because We Believe In The Exceptional Quality Of Our Components, Every Axle Comes With A Limited Lifetime Warranty.
Since Boot Failure Is The Main Cause Of Cv Axle Failure, Our Axles Use Only Premium Grade Neoprene Boots That Ensure Robust Abrasion And Extreme Temperature Resistance, Preserving Boot Integrity.
Features
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); 22-1/16 inch compressed length; 33 spline outer joint; 34 spline inner joint. IBJ Type: Female
- For select GM vehicles (verify fitment details with fit checker above): BUICK: 2000-05 Century, 2005-09 LaCrosse, 2000-05 LeSabre, 2006-11 Lucerne, 1997-05 Park Avenue, 1997-04 Regal, 1997-99 Riviera; CHEVROLET: 2000-11 Impala
- CHEVROLET: 2000-07 Monte Carlo, 1999-05 Venture; PONTIAC: 2000-04 Bonneville, 1997-08 Grand Prix, 1999-05 Montana
- See more on Amazon...
First Available: 02/05/2016
Brand: GSP | Manufacturer: GSP
Dimensions: 4.33 x 26.77 x 4.33 Inches
Warranty: Contact manufacturer
See On Amazon #3
LivTee Motorcycle Side Mount License Plate Bracket Compatible with Harley Made Aluminum Alloy for Most Bike Motorcycle
Asin: B0CB4F3WXR
Size: Plate Holder: 7"X 4" (18X10cm). Tail Light Bracket: 2,5"X 3" (6X8cm). Axle Mounting Hole: 0.75" (2Cm).
Enjoy Warranty: You Will Get Quality Products, If You Have Any Questions, Please Contact Us, We Are Always Waiting For You Here..
Package Include: 1 X License Plate Bracket, Fixing X 2, Mounting Screws X 4, Hexagonal Nuts X 4, Washer X 4 Included..
Installation：Allows The License Plate To Be Mounted Horizontally Or Vertically On Either The Left Or Right Side Of The Bike By Bolting It Together Using The Precut Mounting Holes In The Bracket..
Features
- Material: Made of high quality aluminum alloy, durable, rust and corrosion resistant.
- Installation Allows the license plate to be mounted horizontally or vertically on either the left or right side of the bike by bolting it together using the precut mounting holes in the bracket.
- Size: Plate holder: 7x 4 (18x10cm). Tail light bracket: 2,5x 3 (6x8cm). Axle mounting Hole: 0.75 (2cm)
- Package Include: 1 X License Plate Bracket, Fixing X 2, Mounting Screws X 4, Hexagonal nuts X 4, Washer X 4 Included.
- Enjoy Warranty: You will get quality products, if you have any questions, please contact us, we are always waiting for you here.
- See more on Amazon...
Brand: LivTee | Manufacturer: LivTee
See On Amazon #4
bylikeho Stainless Steel Brake Disc Rotor Screws,12PCS Brake Disc Retaining Screw,Car Accessories Retaining Hardware Bolts Screw Kit for Front and Rear,Rotor Screws Replacement for Most Car Models
Asin: B0CZ3T5C9D | Model: 1475ZDPZZLS001 | PartNumber: 1475ZDPZZLS001
[Perfect Braking Work] When You Place The Brake Disc Back On The Tire, These Screws Secure The Brake Disc In Place. After Reopening The Caliper/Tire, It Can Be Left In Place Or Removed. For Best Results, Please Apply Anti Jamming Lubricant For Future Disassembly..
[Widely Applicable] This Stainless Steel Screw Is Suitable For Many Car Models. It Is The Perfect Accessory For The Front, Rear, Left, And Right Brake Rotor Of A Car. Please Confirm That The Size Of This Product Is What You Need Before Purchasing..
[Easy To Install] The Stainless Steel Brake Disc Rotor Screws Are Easy To Install And Remove, Just Use A Screwdriver To Remove The Old Ones And Then Install The New Screws On Top..
[Oe Standard]These Screws Meet Or Exceed Oem Quality Standards And Are Very Shiny, Making Them A Perfect Replacement Accessory. It Has Strict Tolerance Design To Meet Mechanical Requirements, Making These Screws The Perfect Choice For Professionals..
Features
- [High Quality Materials]The brake disc rotor screws are made of high-quality stainless steel, waterproof and rust proof, with strong strength. Even if used for a long time, they will not be oxidized, corroded, or worn, so you can use them with confidence.
- [OE Standard]These screws meet or exceed OEM quality standards and are very shiny, making them a perfect replacement accessory. It has strict tolerance design to meet mechanical requirements, making these screws the perfect choice for professionals.
- [Perfect Braking Work] When you place the brake disc back on the tire, these screws secure the brake disc in place. After reopening the caliper/tire, it can be left in place or removed. For best results, please apply anti jamming lubricant for future disassembly.
- [Easy to Install] The stainless steel brake disc rotor screws are easy to install and remove, just use a screwdriver to remove the old ones and then install the new screws on top.
- [Widely Applicable] This stainless steel screw is suitable for many car models. It is the perfect accessory for the front, rear, left, and right brake rotor of a car. Please confirm that the size of this product is what you need before purchasing.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: no
See On Amazon #5
4PCS Car Side Window Sun Shades with Magnetic,Auto Front and Rear Windshield Curtains, Privacy Side Sunshade Curtain for Baby, Heat Insulation and UV Protection, Universal Car Accessories(Front+Back)
Asin: B0D12JBGW7 | Model: MLAHUIER-Auto39 | PartNumber: MLAHUIER-Auto39
【Magnetic Design】Our Sunshades Come With 10 Powerful Magnets, They Are Lightweight, Foldable And Can Be Stored In A Bag Or Car As A Backup When Not In Use. Wipe The Window Clean With Detergent And Paper Towels Or A Clean Cloth Before Installation To Ensure The Magnetic Shade Adheres Securely To The Edge Of The Window. Note: Only Iron Door Frames Are Available..
【Universal Size】The Front Window Sunshade Is 18.9×24.4 Inches And Fit The Front Left And Right Side Windows.The Back Window Sunshade Is 18.9×31.1 Inches And Fit The Rear Left And Right Side Windows. You Can Purchase As Needed. You Can Also Purchase A Front And Rear Combination 4 Pieces Set To Cover The Entire Side Windows Of Your Car..
【Wide Application】Suitable For Most Vehicles With Iron Door Frames, Such As Cars, Suvs, Mpvs, Etc. If Your Vehicle Has Aluminum Door Frames, They Cannot Be Attracted Magnetically. Please Make Sure Your Vehicle Door Frame Is Iron Before Purchasing..
【Practical Function】This Car Curtains Can Block More Than 99% Of Harmful Ultraviolet Rays, Reduce Direct Sunlight In The Car, Which Affects Rest, Protect Privacy, Block Heat, And Keep It In A Cool Driving Environment..
Features
- High Material The car side window sun shades made of polyester fiber.The surface has a uniform PU coating, which has good light-shielding properties and can effectively protect privacy. The double-sided sun protection and cooling effects are very significant.
- Practical Function This car curtains can block more than 99% of harmful ultraviolet rays, reduce direct sunlight in the car, which affects rest, protect privacy, block heat, and keep it in a cool driving environment.
- Magnetic Design Our sunshades come with 10 powerful magnets, they are lightweight, foldable and can be stored in a bag or car as a backup when not in use. Wipe the window clean with detergent and paper towels or a clean cloth before installation to ensure the magnetic shade adheres securely to the edge of the window. Note: Only iron door frames are available.
- Wide Application Suitable for most vehicles with iron door frames, such as cars, SUVs, MPVs, etc. If your vehicle has aluminum door frames, they cannot be attracted magnetically. Please make sure your vehicle door frame is iron before purchasing.
- Universal Size The front window sunshade is 18.9 24.4 inches and fit the front left and right side windows.The back window sunshade is 18.9 31.1 inches and fit the rear left and right side windows. You can purchase as needed. You can also purchase a front and rear combination 4 pieces set to cover the entire side windows of your car.
- See more on Amazon...
Brand: MLAHUIER | Manufacturer: MLAHUIER
Dimensions: 0.40 x 18.90 x 31.30 Inches
See On Amazon #6
BELOMI Joint CV Boot Clamp Pliers, Ear Clamp Banding Tool Kit, Automotive Hose Axle Pliers, Heavy Duty Universal Vacuum Hoses Clamping, Auto Repair Tools for Car ATV UTV
Asin: B0C7ZP814S | Model: Pliers | PartNumber: Pliers
【Crimping Tool】: Equipped With In-Line Jaws On The End, This Axle Boot Clamp Tool Can Perfectly Crimp On Clamp Ears To Prevent Damage And Offer A Perfect Crimp On Clamp Ears To Prevent Leakage. It's A Must-Have Cv Boot Repair Kit For Repairing Store..
【What You Get】: The Package Includes 1X Cv Joint Ear Clamp Banding Tool And 1X Cv Boot Clamp Pliers, Same As The Pictures. Different Clamp To Meet Your Different Needs. We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers..
【Large Compatibility】: The Cv Boot Clamp Pliers For Ear-Type Clamp Crimping Or Removal On For Most Vehicles In The Market To Crimp And Flatten The Clamp On Ear-Type Constant Velocity Joint Boot Clamps, Also Be Used For Securing Atv Utv Boot Clamps. Also A Good Cv Boot Installation Tool And Hose Grip Pliers Suitable For Installation Of Certain Clamps On Fuel Filters, Water Pumps And Other Cooling Systems..
【Practical Function】: The 2Pcs Cv Joint Boot Clamps Pliers Car Banding Tools Kit Set For Fast And Simple Tensioning And Securing Of Cv Boot Banding Strap. With A Built In Cutter And Winding Mechanism The Banding Can Be Tightened And Cut Quickly And Effectively. This Tool Is Essential For Fixing Cv Boots. Heavy-Duty Pliers With Steel Jaws And Formed Handles For Ultimate Comfort, Less User Fatigue, And More Productivity..
Features
- Premium Material : The pliers are made of high grade pressed steel and coated with a black coating. Heavy-duty pliers with non-slip plastic handles, high-quality steel jaws and shaped handles, making it more comfortable to use.
- Practical Function : The 2pcs CV joint boot clamps pliers car banding tools kit set for fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity.
- Crimping Tool : Equipped with in-line jaws on the end, this axle boot clamp tool can perfectly crimp on clamp ears to prevent damage and offer a perfect crimp on clamp ears to prevent leakage. It's a must-have CV boot repair kit for repairing store.
- Large Compatibility : The CV boot clamp pliers for ear-type clamp crimping or removal on for most vehicles in the market to crimp and flatten the clamp on ear-type constant velocity joint boot clamps, also be used for securing ATV UTV boot clamps. Also a good CV boot installation tool and hose grip pliers suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems.
- What You Get : The package includes 1x CV joint ear clamp banding tool and 1x CV boot clamp pliers, same as the pictures. Different clamp to meet your different needs. We focus on customer using experience and try our best to provide the best product and service for our customers.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 1.00 x 3.00 x 1.20 inches | Weight: 0.49 Pounds
Warranty: 0.2
See On Amazon #7
GSP NCV69051 CV Axle Shaft Assembly - Left Front (Driver Side)
Asin: B07DM2RFD9 | Model: NCV69051 | PartNumber: NCV69051 | Ean: 0883331376996 | UPC: 883331376996
Assembled With A Specially Formulated, High-Temperature Moly Grease That Resists Friction And Wear, Contributing To A Lifetime Of Smooth, Dependable Performance.
Left Front (Driver Side).
Compatible With Select Vehicles (Verify Fitment Details With Fit Checker Above): Pontiac: 2009-10 Vibe; Toyota: 2009-19 Corolla, 2009-13 Matrix.
All Axles Are Thoroughly Inspected For Quality And Workmanship, And Because We Believe In The Exceptional Quality Of Our Components, Every Axle Comes With A Limited Lifetime Warranty.
Since Boot Failure Is The Main Cause Of Cv Axle Failure, Our Axles Use Only Premium Grade Neoprene Boots That Ensure Robust Abrasion And Extreme Temperature Resistance, Preserving Boot Integrity.
Features
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side)
- Compatible with select vehicles (verify fitment details with fit checker above): PONTIAC: 2009-10 Vibe; TOYOTA: 2009-19 Corolla, 2009-13 Matrix
- See more on Amazon...
First Available: 06/07/2018
Brand: GSP | Manufacturer: GSP
Dimensions: 5.00 x 33.00 x 5.00 inches | Weight: 12.61 pounds
Warranty: limited lifetime warranty
See On Amazon #8
GSP NCV53911 CV Axle Shaft Assembly - Left Front (Driver Side), black & silver
Asin: B00O4QC79S | Model: NCV53911 | PartNumber: NCV53911 | Ean: 0883331539117 | UPC: 883331539117
Assembled With A Specially Formulated, High-Temperature Moly Grease That Resists Friction And Wear, Contributing To A Lifetime Of Smooth, Dependable Performance.
Left Front (Driver Side); Compressed Length Is 26 3/8", Outboard Joint Spline Count Is 29, Inboard Joint Spline Count Is 27, Inboard Joint Type Is Male.
For Select Nissan Vehicles (Verify Fitment Details With Fit Checker Above): 2007-13 Altima, 2008-13 Rogue, 2014-15 Rogue Select, 2007-12 Sentra.
All Axles Are Thoroughly Inspected For Quality And Workmanship, And Because We Believe In The Exceptional Quality Of Our Components, Every Axle Comes With A Limited Lifetime Warranty.
Since Boot Failure Is The Main Cause Of Cv Axle Failure, Our Axles Use Only Premium Grade Neoprene Boots That Ensure Robust Abrasion And Extreme Temperature Resistance, Preserving Boot Integrity.
Features
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); Compressed Length is 26 3/8, Outboard Joint Spline Count is 29, Inboard Joint Spline Count is 27, Inboard Joint Type is Male
- For select Nissan vehicles (verify fitment details with fit checker above): 2007-13 Altima, 2008-13 Rogue, 2014-15 Rogue Select, 2007-12 Sentra
- See more on Amazon...
First Available: 02/25/2016
Brand: GSP | Manufacturer: GSP
Dimensions: 4.33 x 31.10 x 4.33 inches | Weight: 17.00 pounds
Warranty: Contact manufacturer
See On Amazon #9
GSP NCV53000 CV Axle Shaft Assembly - Left Front (Driver Side)
Asin: B01C735L56 | Model: NCV53000 | PartNumber: NCV53000 | Ean: 0883331530008 | UPC: 883331530008
Assembled With A Specially Formulated, High-Temperature Moly Grease That Resists Friction And Wear, Contributing To A Lifetime Of Smooth, Dependable Performance.
Left Front (Driver Side); 26-1/4 Inch Compressed Length; 29 Spline Outer Joint; 27 Spline Inner Joint.
For Select Vehicles (Verify Fitment Details With Fit Checker Above): Nissan: 2008-13 Rogue, 2014-15 Rogue Select.
All Axles Are Thoroughly Inspected For Quality And Workmanship, And Because We Believe In The Exceptional Quality Of Our Components, Every Axle Comes With A Limited Lifetime Warranty.
Since Boot Failure Is The Main Cause Of Cv Axle Failure, Our Axles Use Only Premium Grade Neoprene Boots That Ensure Robust Abrasion And Extreme Temperature Resistance, Preserving Boot Integrity.
Features
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); 26-1/4 inch compressed length; 29 spline outer joint; 27 spline inner joint
- For select vehicles (verify fitment details with fit checker above): NISSAN: 2008-13 Rogue, 2014-15 Rogue Select
- See more on Amazon...
First Available: 02/25/2016
Brand: GSP | Manufacturer: GSP
Dimensions: 5.00 x 33.00 x 5.00 inches | Weight: 14.98 pounds
Warranty: Contact manufacturer
See On Amazon #10
GSP NCV69583 CV Axle Shaft Assembly - Left Front (Driver Side)
Asin: B006EKKXU2 | Model: NCV69583 | PartNumber: NCV69583 | Ean: 0883331695837 | UPC: 883331695837
Assembled With A Specially Formulated, High-Temperature Moly Grease That Resists Friction And Wear, Contributing To A Lifetime Of Smooth, Dependable Performance.
Left Front (Driver Side); 25-1/8 Inch Compressed Length; 26 Spline Outer Joint; 23 Spline Inner Joint; 48 Tooth Abs Ring.
For Select 2003-08 Toyota Corolla Vehicles (Verify Fitment Details With Fit Checker Above).
All Axles Are Thoroughly Inspected For Quality And Workmanship, And Because We Believe In The Exceptional Quality Of Our Components, Every Axle Comes With A Limited Lifetime Warranty.
Since Boot Failure Is The Main Cause Of Cv Axle Failure, Our Axles Use Only Premium Grade Neoprene Boots That Ensure Robust Abrasion And Extreme Temperature Resistance, Preserving Boot Integrity.
Features
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); 25-1/8 inch compressed length; 26 spline outer joint; 23 spline inner joint; 48 tooth ABS ring
- For select 2003-08 Toyota Corolla vehicles (verify fitment details with fit checker above)
- See more on Amazon...
First Available: 02/05/2016
Brand: GSP | Manufacturer: GSP
Dimensions: 4.33 x 26.77 x 4.33 inches
See On Amazon #11
GSP NCV36568 CV Axle Shaft Assembly - Left Front (Driver Side), black/silver
Asin: B00O4Q3IVE | Model: NCV36568 | PartNumber: NCV36568 | Ean: 0883331365686 | UPC: 883331365686
Assembled With A Specially Formulated, High-Temperature Moly Grease That Resists Friction And Wear, Contributing To A Lifetime Of Smooth, Dependable Performance.
Axle Nut Socket Size:32Mm ; Thread Size: M22x1.5 ; Nut Type: Hex ; Nut Length : 20Mm ; Conventional Outboard Joint Type.
Left Front (Driver Side); Compressed Length Is 24 1/4", Outboard Joint Spline Count Is 26, Inboard Joint Spline Count Is 25, Inboard Joint Type Is Male.
For Select 2006-15 Honda Civic Vehicles (Verify Fitment Details With Fit Checker Above).
All Axles Are Thoroughly Inspected For Quality And Workmanship, And Because We Believe In The Exceptional Quality Of Our Components, Every Axle Comes With A Limited Lifetime Warranty.
Since Boot Failure Is The Main Cause Of Cv Axle Failure, Our Axles Use Only Premium Grade Neoprene Boots That Ensure Robust Abrasion And Extreme Temperature Resistance, Preserving Boot Integrity.
Features
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); Compressed Length is 24 1/4, Outboard Joint Spline Count is 26, Inboard Joint Spline Count is 25, Inboard Joint Type is Male
- For select 2006-15 Honda Civic vehicles (verify fitment details with fit checker above)
- Axle nut socket size:32mm ; Thread size: M22x1.5 ; Nut type: Hex ; Nut length : 20mm ; Conventional outboard joint type
- See more on Amazon...
First Available: 02/25/2016
Brand: GSP | Manufacturer: GSP
Dimensions: 4.33 x 26.77 x 4.33 inches | Weight: 11.60 pounds
See On Amazon #12
Sposuit Trunk Organizer for Car - 70L Collapsible Trunk Storage with 11 Pockets & Reinforced Handles, SUV Trunk Organizers for Grocery Cargo(Blue)
Asin: B0BGX9H52G | Ean: 0783759628458 | UPC: 783759628458
✅【High Quality Material】The Car Grocery Organizer Trunk Is Made Of 600D Oxford Polyester Material, Which Has Good Abrasion Resistance And Durability. It Is Well Made And The Stitching Is Firm. Car Trunk Storage Organizer Can Pass The Test Of Time. If You Want To Clean It, Any Spray Cleaner And Damp Cloth Will Do The Trick..
✅【Satisfaction Guarantee】Sposuit Trunk Organizer For Car Women & Men Guarantees Your Absolute Satisfaction. Ensuring Customer Satisfaction Is Our Aim. If You Have Any Questions, Please Contact Us.We Will Provide A Full Year Quality Guarantee For Every Buyer Who Buys Sposuit Trunk Storage..
✅【Multi-Purpose Foldable】Our Collapsible Trunk Organizer Is Easy To Fold And Very Convenient To Use. You Can Place It Not Only In The Trunk, But Also In The Front Or Rear Seats Of The Vehicle. It's Great For Keeping Your Car Clean And Accessible. When You Don't Need To Use It, You Can Fold It Up For Easy Carrying And Storage..
✅【Large Trunk Organizer】The Fully Extended Dimensions Of The Suv Trunk Organizer Is 23.6''L X 14.6' 'W X 12.2''H. There Are 2 Main Compartments In The Car Trunk Organizer For Sedan With 8 Side Cloth Pockets And 3 Large Mesh Pockets, Which Can Bring More Storage Space And More Flexible Space Allocation For You..
Features
- ORGANIZE YOUR CAR TRUNK When you open the trunk after grocery shopping, you definitely don't want to have a mess of groceries splattered around the trunk. Our trunk organizers and storage is secured with Velcro. It does a great job of helping you organize groceries so you don't have them rolling around in the trunk.
- LARGE TRUNK ORGANIZER The fully extended dimensions of the SUV trunk organizer is 23.6''L x 14.6' 'W x 12.2''H. There are 2 main compartments in the car trunk organizer for sedan with 8 side cloth pockets and 3 large mesh pockets, which can bring more storage space and more flexible space allocation for you.
- HIGH QUALITY MATERIAL The car grocery organizer trunk is made of 600D Oxford polyester material, which has good abrasion resistance and durability. It is well made and the stitching is firm. car trunk storage organizer can pass the test of time. If you want to clean it, any spray cleaner and damp cloth will do the trick.
- MULTI-PURPOSE FOLDABLE Our collapsible trunk organizer is easy to fold and very convenient to use. You can place it not only in the trunk, but also in the front or rear seats of the vehicle. It's great for keeping your car clean and accessible. When you don't need to use it, you can fold it up for easy carrying and storage.
- SATISFACTION GUARANTEE Sposuit trunk organizer for car women & men guarantees your absolute satisfaction. Ensuring customer satisfaction is our aim. If you have any questions, please contact us.We will provide a full year quality guarantee for every buyer who buys Sposuit trunk storage.
- See more on Amazon...
Brand: Sposuit | Manufacturer: Sposuit
Dimensions: 12.20 x 14.60 x 23.60 inches | Weight: 2.95 Pounds
See On Amazon #13
GSP NCV69517 CV Axle Shaft Assembly - Left Front (Driver Side)
Asin: B001B082ZI | Model: NCV69517 | PartNumber: NCV69517 | Ean: 0883331695172 | UPC: 883331695172
Assembled With A Specially Formulated, High-Temperature Moly Grease That Resists Friction And Wear, Contributing To A Lifetime Of Smooth, Dependable Performance.
Left Front (Driver Side); 23-13/16 Inch Compressed Length; 26 Spline Outer Joint; 23 Spline Inner Joint; 48 Tooth Abs Ring.
For Select Vehicles (Verify Fitment Details With Fit Checker Above): Geo: 1993-97 Prizm; Toyota: 1990-93 Celica, 1993-02 Corolla.
All Axles Are Thoroughly Inspected For Quality And Workmanship, And Because We Believe In The Exceptional Quality Of Our Components, Every Axle Comes With A Limited Lifetime Warranty.
Since Boot Failure Is The Main Cause Of Cv Axle Failure, Our Axles Use Only Premium Grade Neoprene Boots That Ensure Robust Abrasion And Extreme Temperature Resistance, Preserving Boot Integrity.
Features
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); 23-13/16 inch compressed length; 26 spline outer joint; 23 spline inner joint; 48 tooth ABS ring
- For select vehicles (verify fitment details with fit checker above): GEO: 1993-97 Prizm; TOYOTA: 1990-93 Celica, 1993-02 Corolla
- See more on Amazon...
First Available: 02/05/2016
Brand: GSP | Manufacturer: GSP
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 14.40 Pounds
See On Amazon #14
GSP NCV36519 CV Axle Shaft Assembly - Left Front (Driver Side)
Asin: B001C9PAWG | Model: NCV36519 | PartNumber: NCV36519 | Ean: 0883331365198 | UPC: 883331365198
Assembled With A Specially Formulated, High-Temperature Moly Grease That Resists Friction And Wear, Contributing To A Lifetime Of Smooth, Dependable Performance.
Left Front (Driver Side); 24-1/8 Inch Compressed Length; 28 Spline Outer Joint; 27 Spline Inner Joint; 50 Tooth Abs Ring.
For Select 1997-01 Honda Cr-V Vehicles (Verify Fitment Details With Fit Checker Above).
All Axles Are Thoroughly Inspected For Quality And Workmanship, And Because We Believe In The Exceptional Quality Of Our Components, Every Axle Comes With A Limited Lifetime Warranty.
Since Boot Failure Is The Main Cause Of Cv Axle Failure, Our Axles Use Only Premium Grade Neoprene Boots That Ensure Robust Abrasion And Extreme Temperature Resistance, Preserving Boot Integrity.
Features
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); 24-1/8 inch compressed length; 28 spline outer joint; 27 spline inner joint; 50 tooth ABS ring
- For select 1997-01 Honda CR-V vehicles (verify fitment details with fit checker above)
- See more on Amazon...
First Available: 02/06/2016
Brand: GSP | Manufacturer: GSP
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #15
GSP NCV11129 CV Axle Shaft Assembly - Left Front (Driver Side)
Asin: B001B09X42 | Model: NCV11129 | PartNumber: NCV11129 | Ean: 0883331111290 | UPC: 883331111290
Assembled With A Specially Formulated, High-Temperature Moly Grease That Resists Friction And Wear, Contributing To A Lifetime Of Smooth, Dependable Performance.
Left Front (Driver Side); 24-1/8 Inch Compressed Length; 25 Spline Outer Joint; 26 Spline Inner Joint.
For Select 2000-11 Ford Focus Vehicles (Verify Fitment Details With Fit Checker Above).
All Axles Are Thoroughly Inspected For Quality And Workmanship, And Because We Believe In The Exceptional Quality Of Our Components, Every Axle Comes With A Limited Lifetime Warranty.
Since Boot Failure Is The Main Cause Of Cv Axle Failure, Our Axles Use Only Premium Grade Neoprene Boots That Ensure Robust Abrasion And Extreme Temperature Resistance, Preserving Boot Integrity.
Features
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); 24-1/8 inch compressed length; 25 spline outer joint; 26 spline inner joint
- For select 2000-11 Ford Focus vehicles (verify fitment details with fit checker above)
- See more on Amazon...
First Available: 02/05/2016
Brand: GSP | Manufacturer: GSP
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 13.36 Pounds
See On Amazon #16
GSP NCV10641 CV Axle Shaft Assembly - Left Front (Driver Side)
Asin: B00O4Q62WQ | Model: NCV10641 | PartNumber: NCV10641 | Ean: 0883331106418 | UPC: 883331106418
Assembled With A Specially Formulated, High-Temperature Moly Grease That Resists Friction And Wear, Contributing To A Lifetime Of Smooth, Dependable Performance.
Left Front (Driver Side); 26-5/8 Inch Compressed Length; 30 Spline Outer Joint; 34 Spline Inner Joint.
For Select Vehicles (Verify Fitment Details With Fit Checker Above): 2010-17 Chevrolet Equinox; 2010-17 Gmc Terrain.
All Axles Are Thoroughly Inspected For Quality And Workmanship, And Because We Believe In The Exceptional Quality Of Our Components, Every Axle Comes With A Limited Lifetime Warranty.
Since Boot Failure Is The Main Cause Of Cv Axle Failure, Our Axles Use Only Premium Grade Neoprene Boots That Ensure Robust Abrasion And Extreme Temperature Resistance, Preserving Boot Integrity.
Features
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); 26-5/8 inch compressed length; 30 spline outer joint; 34 spline inner joint
- For select vehicles (verify fitment details with fit checker above): 2010-17 Chevrolet Equinox; 2010-17 GMC Terrain
- See more on Amazon...
First Available: 02/25/2016
Brand: GSP | Manufacturer: GSP
Dimensions: 4.10 x 30.30 x 4.10 inches
See On Amazon #17
GSP NCV69577 CV Axle Shaft Assembly - Left Front (Driver Side)
Asin: B001B09XD8 | Model: NCV69577 | PartNumber: NCV69577 | Ean: 0883331695776 | UPC: 883331695776
Assembled With A Specially Formulated, High-Temperature Moly Grease That Resists Friction And Wear, Contributing To A Lifetime Of Smooth, Dependable Performance.
Left Front (Driver Side); 25-7/8 Inch Compressed Length; 26 Spline Outer Joint; 24 Spline Inner Joint; 48 Tooth Abs Ring.
For Select Toyota Vehicles (Verify Fitment Details With Fit Checker Above): 2002-06 Camry, 2004-08 Solara.
All Axles Are Thoroughly Inspected For Quality And Workmanship, And Because We Believe In The Exceptional Quality Of Our Components, Every Axle Comes With A Limited Lifetime Warranty.
Since Boot Failure Is The Main Cause Of Cv Axle Failure, Our Axles Use Only Premium Grade Neoprene Boots That Ensure Robust Abrasion And Extreme Temperature Resistance, Preserving Boot Integrity.
Features
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); 25-7/8 inch compressed length; 26 spline outer joint; 24 spline inner joint; 48 tooth ABS ring
- For select Toyota vehicles (verify fitment details with fit checker above): 2002-06 Camry, 2004-08 Solara
- See more on Amazon...
First Available: 02/05/2016
Brand: GSP | Manufacturer: GSP
Dimensions: 4.33 x 31.10 x 4.33 inches | Weight: 16.00 Pounds
Warranty: Contact manufacturer
See On Amazon #18
GSP NCV82017 CV Axle Shaft Assembly - Left Front (Driver Side)
Asin: B00O4Q8IEQ | Model: NCV82017 | PartNumber: NCV82017 | Ean: 0883331820178 | UPC: 883331820178
Assembled With A Specially Formulated, High-Temperature Moly Grease That Resists Friction And Wear, Contributing To A Lifetime Of Smooth, Dependable Performance.
Left Front (Driver Side); 25-1/8 Inch Compressed Length; 28 Spline Outer Joint; 27 Spline Inner Joint.
For Select Vehicles (Verify Fitment Details With Fit Checker Above): Dodge: 2007-12 Caliber; Jeep: 2007-17 Compass, 2007-17 Patriot.
All Axles Are Thoroughly Inspected For Quality And Workmanship, And Because We Believe In The Exceptional Quality Of Our Components, Every Axle Comes With A Limited Lifetime Warranty.
Since Boot Failure Is The Main Cause Of Cv Axle Failure, Our Axles Use Only Premium Grade Neoprene Boots That Ensure Robust Abrasion And Extreme Temperature Resistance, Preserving Boot Integrity.
Features
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); 25-1/8 inch compressed length; 28 spline outer joint; 27 spline inner joint
- For select vehicles (verify fitment details with fit checker above): DODGE: 2007-12 Caliber; JEEP: 2007-17 Compass, 2007-17 Patriot
- See more on Amazon...
First Available: 02/25/2016
Brand: GSP | Manufacturer: GSP
Dimensions: 5.60 x 31.45 x 5.19 inches
Warranty: Contact manufacturer
See On Amazon #19
BELOMI Hose Clamp Pliers with CV Boot Clamp Kit, Heavy Duty Multi-purpose Pliers with Adjustable Small and Large Stainless Steel Drive Shaft CV Boot, Auto Hose Axle Pliers for Car ATV UTV (21pcs)
Asin: B0C83W8VX5 | Model: BELOMI-Number | PartNumber: BELOMI-Number
【Easy To Store And Install】: This Kit Good Working Condition And Easy To Install. Adjustable, Freely Adjust The Tightness, Easy To Fold And Place, Easy To Store. It Can Be Folded Or Cut Into Strips To Narrow The Width, Making It Easier To Store In Tight Spaces. Placement On Vehicle: Left , Right, Front And Rear. Remove The Old Clamps, Clean Up The Grease, And Put The New Clamps On..
【What You Receive】: In This Kit, You Will Get 1 Pc Hose Clamp Pliers And 10/12Pcs Small Cv Boot Clamps (Height: 7Mm), 10/12 Pcs Large Cv Boot Clamps (Height: 9Mm). Total 21/25Pcs In A Box, Can Meet All Your Different Daily Needs. High Quality, Non-Magnetic Stainless Steel. Solid And Durable..
【High Compatibility】: The Perimeter Of The Small Clamps Can Be Adjusted From 20 Mm (0.79 In) To 50 Mm (1.97 In), While The Large Clamps Can Be Adjusted From 50 Mm (1.97 In) To 120 Mm (4.7 In). Ideal For Installing Clamps On Fuel Filters, Water Pumps, Cv Joint Boots, Atv Axle Boot And Other Cooling System Hoses. This Cv Joint Axle Boot Clamp Pliers Fits Most Of Cars..
【Anti-Slip Design】: With An Ergonomically Insulated Anti-Slip Rubber Handle, It Can Effectively Reduce User Fatigue. It Is Practical And Comfortable, And Provide You With Comfortable And Labor-Saving Use Effect, And Improve Efficiency..
Features
- High-Quality Material : The pliers are made of high-quality stainless steel as a whole, which is durable, corrosion-resistant, oil-resistant, high-temperature resistant, and has a long service life. The clamp head undergoes a quenching process for higher hardness. Good as new. No need to spend a fortune on new CV axles.
- Anti-Slip Design : With an ergonomically insulated anti-slip rubber handle, it can effectively reduce user fatigue. It is practical and comfortable, and provide you with comfortable and labor-saving use effect, and improve efficiency.
- Easy to store and Install : This kit good working condition and easy to install. Adjustable, freely adjust the tightness, easy to fold and place, easy to store. It can be folded or cut into strips to narrow the width, making it easier to store in tight spaces. Placement on vehicle: left , right, front and rear. Remove the old clamps, clean up the grease, and put the new clamps on.
- High Compatibility : The perimeter of the small clamps can be adjusted from 20 mm (0.79 in) to 50 mm (1.97 in), while the large clamps can be adjusted from 50 mm (1.97 in) to 120 mm (4.7 in). Ideal for installing clamps on fuel filters, water pumps, CV joint boots, ATV axle boot and other cooling system hoses. This CV joint axle boot clamp pliers fits most of cars.
- What You Receive : In this kit, You will get 1 Pc Hose clamp pliers and 10/12Pcs small CV boot clamps (Height: 7mm), 10/12 Pcs large CV boot clamps (Height: 9mm). Total 21/25Pcs in a box, can meet all your different Daily needs. High quality, non-magnetic stainless steel. Solid and durable.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 0.50 x 3.00 x 0.60 Inches | Weight: 0.49 Pounds
Warranty: 0.2
See On Amazon #20
GSP NCV21552 CV Axle Shaft Assembly - Left Front (Driver Side)
Asin: B01C733L1W | Model: NCV21552 | PartNumber: NCV21552 | Ean: 0883331215523 | UPC: 883331215523
Assembled With A Specially Formulated, High-Temperature Moly Grease That Resists Friction And Wear, Contributing To A Lifetime Of Smooth, Dependable Performance.
Left Front (Driver Side); 28-3/4 Inch Compressed Length; 30 Spline Outer Joint; 29 Spline Inner Joint.
For Select Vehicles (Verify Fitment Details With Fit Checker Above): 2007-09 Acura Mdx; 2009-15 Honda Pilot.
All Axles Are Thoroughly Inspected For Quality And Workmanship, And Because We Believe In The Exceptional Quality Of Our Components, Every Axle Comes With A Limited Lifetime Warranty.
Since Boot Failure Is The Main Cause Of Cv Axle Failure, Our Axles Use Only Premium Grade Neoprene Boots That Ensure Robust Abrasion And Extreme Temperature Resistance, Preserving Boot Integrity.
Features
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); 28-3/4 inch compressed length; 30 spline outer joint; 29 spline inner joint
- For select vehicles (verify fitment details with fit checker above): 2007-09 Acura MDX; 2009-15 Honda Pilot
- See more on Amazon...
First Available: 02/25/2016
Brand: GSP | Manufacturer: GSP
Dimensions: 5.00 x 33.00 x 5.00 Inches
Warranty: Contact manufacturer
See On Amazon
Looking For Something Else?
Search