Sidco Supply 4 PCS - 3 Weldable Barrel Hinges 3 Inch x 3/4 Inch Heavy Duty Steel Weld On Bullet Door Hinges Detachable Hinges 15/32 Pin Bearing - Metal Swing Doors, Gates, Glass Door Hinge
Asin: B0CFBK3DDR | Model: WBH-3-19mm-BB-4PK | PartNumber: WBH-3-19mm-BB-4PK
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Smooth Operation - Pin Bearing (Diameter: 11.95Mm), Pre Greased With A Brass Washer Providing A Smooth And Silent 360-Degree Low Friction Rotation That Allows Gates And Doors To Swing Open And Close Smoothly, Reducing Friction And Preventing Unnecessary Wear And Tear..
Includes X 4 Weldable Detachable Barrel Bullet Hinges And 4 Removable Brass Washers.
Barrel Hinges Weld On Glass Doors, Sliding Doors, Iron Doors Such As Swing Gates, Trailer Ramps, Trailer Gates, Residential Or Commercial And Diy Applications..
Superior Strength - Heavy Duty Weldable Barrel Hinges Crafted From Premium Carbon Steel With A Deburred Polished Surface Treatment Offer Exceptional Strength To Withstand The Heaviest Doors And Gates..
Features
- Specifications: 4 Pack 3 x 3/4 Inches (78.22x18.80mm), 3/4" (18.80mm) Thickness, 15/32" Pin Diameter (11.95mm), 5.73oz (162.7g) Weight, 750lb load capacity, 3/4 (15.90mm) Brass Washer
- Superior Strength - Heavy duty weldable barrel hinges crafted from premium carbon steel with a deburred polished surface treatment offer exceptional strength to withstand the heaviest doors and gates.
- Smooth Operation - Pin bearing (diameter: 11.95mm), pre greased with a brass washer providing a smooth and silent 360-degree low friction rotation that allows gates and doors to swing open and close smoothly, reducing friction and preventing unnecessary wear and tear.
- Barrel hinges weld on glass doors, sliding doors, iron doors such as swing gates, trailer ramps, trailer gates, residential or commercial and DIY applications.
- Includes x 4 weldable detachable barrel bullet hinges and 4 removable brass washers
- See more on Amazon...
Brand: Sidco Supply | Manufacturer: Sidco Supply
Dimensions: 0.10 x 3.00 x 0.75 inches | Weight: 5.73 ounces
See On Amazon Similar To Sidco Supply 4 PCS 3
#1
Bobco Metals 4 X4 A36 Steel Plate - High-Quality Steel Plate Base for Structure Support - Weldable Metal Plate for General and Industrial Use -10 Pcs
Asin: B07L6NSQ6B | Model: HWOSORNS-201B | PartNumber: HWOSORNS-201B | Ean: 0664979202263 | UPC: 664979202263
Paint-Ready - Each Metal Plate Has A Smooth, Stained Gray Finish That Provides An Ideal Base For Painting. This Allows For An Even Coat That Prevents Paint From Peeling Or Chipping. A Good Top Coat Adds Wear-Resistant Protection To The Steel Plate..
Bobco Metal Solutions - We Built Our Company From The Ground Up To Become One Of The Oldest Metal Companies In Los Angeles, California. We Are Expert Manufacturers, Retailers And Wholesalers Of Metals For All Your Industrial And Construction Needs..
Plate Specs - Each A36 Steel Plate Measures 4” X 4” And Is 3/16” Thick. Holes Are Pre-Drilled On All 4 Corners Of The Metal Plate, Each Hole Measuring 3/8” In Diameter. Additional Holes May Be Added To The Plate Using A Heavy-Duty, Hard Drill Bit..
Heavy-Duty - These Flat Metal Plates Have A Wide Range Of General And Industrial Applications. They Provide Reliable Support To Structures Subject To Heavy Vibration. A Metal Base Plate May Also Be Used As A Mount For Permanently Installed Equipment..
Features
- WELDABLE STEEL PLATES - These sturdy steel plates provide stable anchor to posts and structures on brick, concrete or cinder block surfaces. The metal plates are made of A36 steel, the same standard-grade alloy used in the construction of buildings.
- HEAVY-DUTY - These flat metal plates have a wide range of general and industrial applications. They provide reliable support to structures subject to heavy vibration. A metal base plate may also be used as a mount for permanently installed equipment.
- PAINT-READY - Each metal plate has a smooth, stained gray finish that provides an ideal base for painting. This allows for an even coat that prevents paint from peeling or chipping. A good top coat adds wear-resistant protection to the steel plate.
- PLATE SPECS - Each A36 steel plate measures 4 X 4 and is 3/16 thick. Holes are pre-drilled on all 4 corners of the metal plate, each hole measuring 3/8 in diameter. Additional holes may be added to the plate using a heavy-duty, hard drill bit.
- BOBCO METAL SOLUTIONS - We built our company from the ground up to become one of the oldest metal companies in Los Angeles, California. We are expert manufacturers, retailers and wholesalers of metals for all your industrial and construction needs.
- See more on Amazon...
Manufacturer: Bobco Metals
See On Amazon #2
Bobco Metals Hot Rolled Steel Base Plate A36 3" X 3" - 4 Holes 3/8" Diameter - Rounded Corners - 3/16" Thick - 10 pcs
Asin: B07L6PLX1M | Model: HWOSDOV02-310 | PartNumber: HWOSDOV02-310 | Ean: 0664979202256 | UPC: 664979202256
Plates Are Available In Measures 3"X 3", And Is 3/16" Thick. Bobco Metals Plates Are Sold In Packs Of 4, 8, 10, 15, And 20 Pieces..
These Plates Have 4 Holes, One At Each Corner And It Uses A Sequence Of Size Of 3/8" And It Has 2 1/8" Distance In Diameter. It's Easy To Drill Additional Holes Into The Plate As Needed And Only Take No More Than A Minute.You Need A Heavy-Duty, Hard Drill Bit To Do The Job..
These Steel Plates Are An Ideal Base For Painting For It Have A Smooth, Stained-Grey Finish That Makes Your Paint Not To Peel Or Chip Off Easily. A Good Top Coat Will Make The Best Finish And Protection On Your Metal. Steel Base Plates Are Essential For Many Kinds Of Support, Particularly Where Posts Need To Be Anchored To Concrete Surfaces. They Are Especially Useful Where Structures Are Subject To Heavy Vibration. They Also Can Be Useful For Mounting Permanently Installed Equipment..
These Steel Plates Weighs 0.25 Lbs Each. They Are Thick Enough To Hold Up Posts, And Provide A Large Enough Surface Area To Distribute Weight Evenly..
Features
- The 3" x 3" Hot Rolled Steel Base Plate is a structural quality steel plate that is used in a wide range of general and industrial applications, such as base plates, road plates, trench coverings, and more. Also, It provides a fine, smooth surface,which creates an excellent base for painting.
- These steel plates weighs 0.25 lbs each. They are thick enough to hold up posts, and provide a large enough surface area to distribute weight evenly.
- Plates are available in measures 3x 3, and is 3/16 thick. Bobco Metals plates are sold in packs of 4, 8, 10, 15, and 20 pieces.
- These steel plates are an ideal base for painting for it have a smooth, stained-grey finish that makes your paint not to peel or chip off easily. A good top coat will make the best finish and protection on your metal. Steel base plates are essential for many kinds of support, particularly where posts need to be anchored to concrete surfaces. They are especially useful where structures are subject to heavy vibration. They also can be useful for mounting permanently installed equipment.
- These plates have 4 holes, one at each corner and it uses a sequence of size of 3/8 and it has 2 1/8 distance in diameter. It's easy to drill additional holes into the plate as needed and only take no more than a minute.You need a heavy-duty, hard drill bit to do the job.
- See more on Amazon...
Manufacturer: Bobco Metals
See On Amazon #3
Bobco Metals Hot Rolled Steel Base Plate A36 6" X 6" - 4 Holes 1/2" Diameter - Rounded Corners - 1/4" Thick - 8 pcs
Asin: B07L6PVJXF | Ean: 0664979202287 | UPC: 664979202287
Plates Are Available In Measures 6"X 6", And Is 1/4" Thick. Bobco Metals Plates Are Sold In Packs Of 4 And 8 Pieces..
These Plates Have 4 Holes, One At Each Corner Measuring 1/2" And It Has 4-5/16" Distance In Diameter. It's Easy To Drill Additional Holes Into The Plate As Needed And Only Take No More Than A Minute. You Need A Heavy-Duty, Hard Drill Bit To Do The Job..
These Steel Plates Are An Ideal Base For Painting For It Have A Smooth, Stained-Grey Finish That Makes Your Paint Not To Peel Or Chip Off Easily. A Good Top Coat Will Make The Best Finish And Protection On Your Metal. Steel Base Plates Are Essential For Many Kinds Of Support, Particularly Where Posts Need To Be Anchored To Concrete Surfaces. They Are Especially Useful Where Structures Are Subject To Heavy Vibration. They Also Can Be Useful For Mounting Permanently Installed Equipment..
These Steel Plates Weighs 2.25 Lbs Each. They Are Thick Enough To Hold Up Posts, And Provide A Large Enough Surface Area To Distribute Weight Evenly..
Features
- The 6" x 6" Hot Rolled Steel Base Plate is a structural quality steel plate that is used in a wide range of general and industrial applications, such as base plates, road plates, trench coverings, and more. Also, It provides a fine, smooth surface,which creates an excellent base for painting.
- These steel plates weighs 2.25 lbs each. They are thick enough to hold up posts, and provide a large enough surface area to distribute weight evenly.
- Plates are available in measures 6x 6, and is 1/4 thick. Bobco Metals plates are sold in packs of 4 and 8 pieces.
- These steel plates are an ideal base for painting for it have a smooth, stained-grey finish that makes your paint not to peel or chip off easily. A good top coat will make the best finish and protection on your metal. Steel base plates are essential for many kinds of support, particularly where posts need to be anchored to concrete surfaces. They are especially useful where structures are subject to heavy vibration. They also can be useful for mounting permanently installed equipment.
- These plates have 4 holes, one at each corner measuring 1/2 and it has 4-5/16 distance in diameter. It's easy to drill additional holes into the plate as needed and only take no more than a minute. You need a heavy-duty, hard drill bit to do the job.
- See more on Amazon...
Brand: Bobco Metals | Manufacturer: Bobco Metals
Weight: 20.00 pounds
See On Amazon #4
Sidco Supply 4 PCS - 3 Weldable Barrel Hinges 3 Inch x 3/4 Inch Heavy Duty Steel Weld On Bullet Door Hinges Detachable Hinges 15/32 Pin Bearing - Metal Swing Doors, Gates, Glass Door Hinge
Asin: B0CK1C51XD | Model: WBH-3-19mm-4PK | PartNumber: WBH-3-19mm-4PK
Smooth Operation - Pin Bearing (Diameter: 11.95Mm), Pre Greased Providing A Smooth And Silent 360-Degree Low Friction Rotation That Allows Gates And Doors To Swing Open And Close Smoothly, Reducing Friction And Preventing Unnecessary Wear And Tear..
Includes X 4 Weldable Detachable Barrel Bullet Hinges.
Barrel Hinges Weld On Glass Doors, Sliding Doors, Iron Doors Such As Swing Gates, Trailer Ramps, Trailer Gates, Residential Or Commercial And Diy Applications..
Superior Strength - Heavy Duty Weldable Barrel Hinges Crafted From Premium Carbon Steel With A Deburred Polished Surface Treatment Offer Exceptional Strength To Withstand The Heaviest Doors And Gates..
Features
- Specifications: 4 Pack 3 x 3/4 Inches (78.22x18.80mm), 3/4" (18.80mm) Thickness, 15/32" Pin Diameter (11.95mm), 5.73oz (162.7g) Weight, 750lb load capacity
- Superior Strength - Heavy duty weldable barrel hinges crafted from premium carbon steel with a deburred polished surface treatment offer exceptional strength to withstand the heaviest doors and gates.
- Smooth Operation - Pin bearing (diameter: 11.95mm), pre greased providing a smooth and silent 360-degree low friction rotation that allows gates and doors to swing open and close smoothly, reducing friction and preventing unnecessary wear and tear.
- Barrel hinges weld on glass doors, sliding doors, iron doors such as swing gates, trailer ramps, trailer gates, residential or commercial and DIY applications.
- Includes x 4 weldable detachable barrel bullet hinges
- See more on Amazon...
Brand: Sidco Supply | Manufacturer: Sidco Supply
Dimensions: 0.10 x 3.00 x 0.75 inches
See On Amazon
Looking For Something Else?
Search