RampCrab Axle widening Upgrade Parts for TRX4M, 11mm Wider on Each Side (Front & Rear), Brass Upgrades Parts for TRX4m RC Crawler Car, Fit for 1/18 TRX4-M Unlimited Trail Buggy, Ultra 11
Asin: B0CFH4LLVK
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Upgrade Parts For Trx4m Made Of High-Quality Brass, It Adds Weight To Your 1/18 Rc Car And Makes The Center Of Gravity Lower. Offer All The Benefits Of Wheel Wideners Of Trx4m Without Any Of The Drawbacks..
Come With Bearings, Screws, Grease & Threadlocker..
Steering Angle Greater Than 45 Degrees..
Say Goodbye To Ruined Scrub Radius, Excessive Load On The Steering Servo, And Diminished Servo Power. Reset The Scrub Radius Back To Stock, Ensuring Ultra-Responsive Steering And Reducing Wear On Your Servo..
Features
- RampCrab widening upgrade kit (Ultra 11) for TRX4M can widen your TRX4m RC Car Axle by 11 mm on each side over stock, Resulting in a total width increase of 22 mm. For front and rear axles.
- Say goodbye to ruined scrub radius, excessive load on the steering servo, and diminished servo power. Reset the scrub radius back to stock, ensuring ultra-responsive steering and reducing wear on your servo.
- The upgrade parts for TRX4M Made of high-quality brass, it adds weight to your 1/18 RC car and makes the center of gravity lower. Offer all the benefits of wheel wideners of TRX4M without any of the drawbacks.
- Steering angle greater than 45 degrees.
- Come with Bearings, Screws, Grease & Threadlocker.
- See more on Amazon...
Brand: RampCrab | Manufacturer: RampCrab
Dimensions: 0.78 x 4.70 x 3.50 inches | Weight: 0.30 pounds
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon Similar To RampCrab Axle widening Upgrade Parts
#1
RampCrab Axle widening Upgrade Parts for TRX4M, 5mm Wider on Each Side (Front & Rear), Brass Upgrades Parts for TRX4m RC Crawler Car, Fit for 1/18 TRX4-M Unlimited Trail Buggy, Ultra 5
Asin: B0CFH5Y7DJ
The Upgrade Parts For Trx4m Made Of High-Quality Brass, It Adds Weight To Your 1/18 Rc Car And Makes The Center Of Gravity Lower. Offer All The Benefits Of Wheel Wideners Of Trx4m Without Any Of The Drawbacks..
Come With Bearings, Screws, Grease & Threadlocker..
Steering Angle Greater Than 45 Degrees..
Say Goodbye To Ruined Scrub Radius, Excessive Load On The Steering Servo, And Diminished Servo Power. Reset The Scrub Radius Back To Stock, Ensuring Ultra-Responsive Steering And Reducing Wear On Your Servo..
Features
- RampCrab widening upgrade kit (Ultra 5) for TRX4M can widen your TRX4m RC Car Axle by 5 mm on each side over stock, Resulting in a total width increase of 10 mm. For front and rear axles.
- Say goodbye to ruined scrub radius, excessive load on the steering servo, and diminished servo power. Reset the scrub radius back to stock, ensuring ultra-responsive steering and reducing wear on your servo.
- The upgrade parts for TRX4M Made of high-quality brass, it adds weight to your 1/18 RC car and makes the center of gravity lower. Offer all the benefits of wheel wideners of TRX4M without any of the drawbacks.
- Steering angle greater than 45 degrees.
- Come with Bearings, Screws, Grease & Threadlocker.
- See more on Amazon...
Brand: RampCrab | Manufacturer: RampCrab
Dimensions: 0.78 x 4.70 x 3.50 inches
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #2
AlveyTech 40" x 1" Steel Axle Rod with 1" to 3/4" Step-Down & 3/4-16 Fine Thread - 1/4" Keyed Shaft for Electric/Gas ATV, Go-Kart, Quad, Cart/Trailers, fits Front and Rear Live Hub Wheel Assembly
Asin: B0BXQZ25N9 | Ean: 0810070315368 | UPC: 810070315368
Measurements - This Axle Features A 1" To 3/4" Step-Down For The Last 2" Of The Axle. At The End Of Each Axle You Will Find A 3/4-16 Fine Thread With 2" Of Length.
Risk Free Guarantee - We Honor Amazon's Return Policy.
Wide Compatibility - The 1" Axle Rod For Go-Karts Is A Go-Kart Part Common To Many 'Karts And Dune Buggies. This Also Fits A Wide Range Of Atv, Tow-Behind Trailer, And More.
Keyed Shaft - Our Axle Rod Features A 1/4" Keyed Shaft For Easy And Secure Attachment. The Keyed Shaft Runs Up Opposite Sides Of The Axle To Ensure You Get A Secure Fit.
Features
- High-Quality Steel - Crafted from durable steel, this 40" x 1" axle rod is built to last through even the toughest conditions. Perfect for trailers, go-karts, and more
- Keyed Shaft - Our axle rod features a 1/4 keyed shaft for easy and secure attachment. The keyed shaft runs up opposite sides of the axle to ensure you get a secure fit
- Measurements - This axle features a 1 to 3/4 step-down for the last 2 of the axle. At the end of each axle you will find a 3/4-16 fine thread with 2 of length
- Wide Compatibility - The 1 axle rod for go-karts is a go-kart part common to many 'karts and dune buggies. This also fits a wide range of ATV, tow-behind trailer, and more
- Risk Free Guarantee - We honor Amazon's return policy
- See more on Amazon...
Brand: AlveyTech | Manufacturer: AlveyTech
Dimensions: 2.00 x 40.00 x 2.00 Inches
See On Amazon #3
AlveyTech 36" x 1" Steel Axle Rod with 1" to 3/4" Step-Down & 3/4-16 Fine Thread - 1/4" Keyed Shaft for Electric/Gas ATV, Go-Kart, Quad, Cart/Trailers, fits Front and Rear Live Hub Wheel Assembly
Asin: B07XYDD728 | Ean: 0636643390880 | UPC: 636643390880
Full Length Keyway Slot – This Axle Features A Pre-Cut Full-Length 1/4" Keyway Slot.
Important To Note - 1" Outer Diameter Is Measured To Nearest Hundreth Of A Decimal. Components To Be Installed Will Need To Be Slightly Larger Than 1" For Them To Be Installed..
Compatible - Fits Perfectly With The Alveytech 4" X 4" Go-Kart Live Axle Hub With 1" To 3/4" Step-Down.
Threaded Ends – The Last 2” Of Each Side Of This Axle Feature A Step-Down From 1" To 3/4-16 Fine Thread.
Universal Compatibility – This Axle Was Designed To Be As Universal As Possible, Meaning It Will Fit A Wide Variety Of Atvs, Go-Karts, Quads, And Trailers.
Features
- Quality Construction Our axle rod shaft is made of durable steel alloy that can withstand almost any amount of punishment you could possibly throw at it
- Universal Compatibility This axle was designed to be as universal as possible, meaning it will fit a wide variety of ATVs, go-karts, quads, and trailers
- Full Length Keyway Slot This axle features a pre-cut full-length 1/4 keyway slot
- Threaded Ends The last 2 of each side of this axle feature a step-down from 1 to 3/4-16 fine thread
- Important to Note - 1 Outer diameter is measured to nearest hundreth of a decimal. Components to be installed will need to be slightly larger than 1 for them to be installed.
- Compatible - Fits perfectly with the AlveyTech 4 x 4 Go-Kart Live Axle Hub with 1 to 3/4 Step-Down
- See more on Amazon...
Brand: AlveyTech | Manufacturer: AlveyTech
Dimensions: 1.50 x 1.50 x 1.50 Inches | Weight: 7.25 Pounds
See On Amazon #4
AlveyTech Standard Rear Axle Adjusting Assembly - Replacement fits The Coleman BT200X, CT200U Trail, & CT200U-EX Mini Bike, 196cc 6.5 Hp Dirt Bikes, Motorcycle, Go-Kart, ATV Parts, 1-Pack DIY Install
Asin: B09X6437F2 | Ean: 0810070313418 | UPC: 810070313418
Single Replacement - Make Sure You Buy The Amount You Want, Plus Some Spare Parts.
Risk Free Guarantee – We Honor Amazon’S Return Policy.
Manufacturer Part Number - Coleman: 42123/Hs200-B.
Use - Our Alveytech Standard Rear Axle Adjusting Assembly Is Designed To Retain The Rear Axle Bolt Allowing The Chain Tension To Be Adjusted To Just How You Like It On Your Coleman Mini Bike.
Features
- Sizing - The AlveyTech replacement tensioner is sized just right, with an 6 mm x 1.0 thread, and a 32 mm thread length. Always get what fits and stay on the trail longer
- Use - Our AlveyTech standard rear axle adjusting assembly is designed to retain the rear axle bolt allowing the chain tension to be adjusted to just how you like it on your Coleman mini bike
- Single Replacement - Make sure you buy the amount you want, plus some spare parts
- Manufacturer Part Number - Coleman: 42123/HS200-b
- Risk Free Guarantee We honor Amazon s return policy
- See more on Amazon...
Brand: AlveyTech | Manufacturer: AlveyTech
Dimensions: 0.05 x 2.90 x 1.00 inches
See On Amazon #5
OTFAITP Stunt Scooter axle Parts Repair Tool Replace for Envy Scooter
Asin: B08Y6R4KCD | Model: OT00367 | PartNumber: OT00367 | Ean: 5033459139620
✔【Suit For】Colt Series 4 /Prodigy Series 8 /Prodigy Series 8 Street /Kos Series 6 /One S3 Complete Rear Wheel Axle..
✔【Material】Made Of High-Quality Carbon Steel, High Load-Bearing, Very Suitable For Stunt Scooters.
Features
- Package Contents : One Rear wheel axle
- Material Made of high-quality carbon steel, high load-bearing, very suitable for stunt scooters
- Suit For Colt Series 4 /Prodigy Series 8 /Prodigy Series 8 Street /KOS Series 6 /One S3 Complete Rear wheel axle.
- See more on Amazon...
Brand: OTFAITP | Manufacturer: OTFAITP
Weight: 0.06 pounds
See On Amazon #6
WEISHUJI Front Rear Wheel Axle Shaft Drive, 4mm Widen Steel Drive Stub Axles CVD Joint Drive Shaft Upgrade Parts for AXIAL SCX24 AXI90081 AXI00001 Upgrades 1/24 RC Crawler Car Parts
Asin: B099ZNCMK3 | Model: 4mmJiaKuanLunZhouCVD | PartNumber: 4mmJiaKuanLunZhouCVD
Front Rear Wheel Axle Shaft Drive Is Easy To Assemble And Disassemble, 4Mm Widen Steel Drive Stub Axles Cvd Joint Drive Shaft Upgrade Parts Have High Precision Machining..
Package List Of Front Rear Wheel Axle Shaft Drive: 4 X Front Rear Wheel Axle Shaft Drive 4 X Nuts 4 X Bolts 4 X Screws 4 X O Rings 4 X Aluminum Rings.
Front Rear Wheel Axle Shaft Drive Is The Perfect Spare Part For Upgrading Your Rc Car..
Front Rear Wheel Axle Shaft Drive Is Made Of High-Quality Metal Material, 4Mm Widen Steel Drive Stub Axles Cvd Joint Drive Shaft Upgrade Parts Is Durable And Wear-Resistant..
Features
- Front Rear Wheel Axle Shaft Drive is unilateral widening 4MM, 4mm Widen Steel Drive Stub Axles CVD Joint Drive Shaft Upgrade Parts is suitable for SCX24 AXI00002; SCX24 AXI00001; SCX24 AXI90081.
- Front Rear Wheel Axle Shaft Drive is made of high-quality metal material, 4mm Widen Steel Drive Stub Axles CVD Joint Drive Shaft Upgrade Parts is durable and wear-resistant.
- Front Rear Wheel Axle Shaft Drive is easy to assemble and disassemble, 4mm Widen Steel Drive Stub Axles CVD Joint Drive Shaft Upgrade Parts have high precision machining.
- Front Rear Wheel Axle Shaft Drive is the perfect spare part for upgrading your RC car.
- Package List of Front Rear Wheel Axle Shaft Drive: 4 x Front Rear Wheel Axle Shaft Drive 4 x Nuts 4 x Bolts 4 x Screws 4 x O Rings 4 x Aluminum Rings
- See more on Amazon...
Brand: WEISHUJI | Manufacturer: WEISHUJI
See On Amazon #7
HD Switch Fork Caster Spindle Rebuild Kit Lower Seal and Bearings Replaces Great Dane Super Surfer
Asin: B07PKD8QTQ | Ean: 7847622857284
Improved Design: Bore Sealant Coating Fills Imperfections For A Better Seal.
Lightning-Fast Handling: All Orders Before 2Pm Est Handle Same Day.
1 Kit Includes: (2) Bearings (Cup & Cone), (1) Upgraded Lower Seal.
Ultimate Protection: Spring Loaded Seal Keeps Out Harmful Dirt, Dust & Water.
Features
- HD SWITCH: Engineered Performance
- ULTIMATE PROTECTION: Spring Loaded Seal Keeps Out Harmful Dirt, Dust & Water
- IMPROVED DESIGN: Bore Sealant Coating Fills Imperfections For a Better Seal
- 1 KIT INCLUDES: (2) Bearings (Cup & Cone), (1) Upgraded Lower Seal
- LIGHTNING-FAST HANDLING: ALL Orders Before 2pm EST HANDLE SAME DAY
- See more on Amazon...
Brand: HD Switch | Manufacturer: HD Switch
See On Amazon #8
Stens 018-438 Heavy-Duty Axle, Silver
Asin: B07G7GYQVQ | Model: 018-438 | PartNumber: 018-438 | Ean: 0023899515998 | UPC: 023899515998
Brand: Stens | Manufacturer: Stens
Dimensions: 4.75 x 22.00 x 4.75 inches | Weight: 10.47 pounds
See On Amazon
Looking For Something Else?
Search