6 Inch Backdraft Damper, HG Power Draft Blocker One-Way Airflow Stopper Backflow Preventer for HVAC Ducting, Inline Fan, Dryer, Exhaust Hood, Bathroom, 150mm, Silver
Asin: B0CFKRFN1C
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy Installation - Installing The Backdraft Damper Is Straightforward; However, Caution Is Advised During Installation To Protect Your Hands. When Mounting The Flap Horizontally, Ensure That The Position Of The Spring Is Also Horizontal For Optimal Opening And Closing Functionality..
Cost-Effective Solution - Hg Power's Backdraft Dampers Present A Dependable And Enduring Solution That Minimizes Upkeep Costs And Safeguards Your Investment Across A Broad Spectrum Of Residential, Commercial, And Industrial Uses..
Wide Application - These Backdraft Dampers Find Extensive Application In A Variety Of Systems Including Ac Units, Exhaust Fans, Extractors, Range Hoods, Heating Ducts, Vents, And More Across Residential, Commercial, And Industrial Settings..
Unique Function - Backdraft Dampers Enable One-Way Airflow Without Necessitating An Actuator. In The Long Term, These Dampers Can Save You Both Time And Money. They Are Essential For Installations Where Air Flow Is Required To Move In A Single Direction, Such As At Intake And Exhaust Points Within Your System..
Features
- Premium Material - The HG Power backdraft damper is constructed from stainless iron, renowned for its corrosion resistance and minimal deformation properties. It is available in four sizes to choose from 4/6/8/10 inches, allowing you to select the right size damper to avoid compatibility issues.
- Unique Function - Backdraft dampers enable one-way airflow without necessitating an actuator. In the long term, these dampers can save you both time and money. They are essential for installations where air flow is required to move in a single direction, such as at intake and exhaust points within your system.
- Easy Installation - Installing the backdraft damper is straightforward; however, caution is advised during installation to protect your hands. When mounting the flap horizontally, ensure that the position of the spring is also horizontal for optimal opening and closing functionality.
- Wide Application - These backdraft dampers find extensive application in a variety of systems including AC units, exhaust fans, extractors, range hoods, heating ducts, vents, and more across residential, commercial, and industrial settings.
- Cost-Effective Solution - HG Power's backdraft dampers present a dependable and enduring solution that minimizes upkeep costs and safeguards your investment across a broad spectrum of residential, commercial, and industrial uses.
- See more on Amazon...
Brand: HG Power | Manufacturer: HG POWER
See On Amazon Similar To 6 Inch Backdraft Damper HG
#1
FRESH SPEED 6-Inch External Extractor Wall Vent Cushioned Non Return Flap
Asin: B097DRYKPV | Ean: 0752349625306 | UPC: 752349625306
【High-Quality Materials】The Vent Covers For Home Are Made Of Brushed 304 Stainless Steel Material, Are Durable, Anti-Rust And Corrosion Resistant..
【Support Guarantee】We Have A 24-Month Warranty. If You Are Not Satisfied With The Product After Receiving The Product, Please Contact Us Directly. We Will Reply Within 4 Hours..
【Great For Home Use】The Flap In Dryer Vent Cover Is Sealed From One Side To Prevent Air Entering The Ventilation System. A Foam Stopper Has Been Installed To The Inside Of The Hood To Keep This Air Vent Open And Close Quietly. And The Air Vent Protects Against Outdoor Noise, Birds, Rats And Rain..
【Easy Installation】 Easy Indoor/Outdoor Installation. Available For Wall Mounting Or Ceiling Mounting. Dryer Vent Is Fixed In Place By 4 Included Screws. The Included Rubber Gasket Minimizes Noise..
Features
- (Please note the diameter of this dryer vent is 5.7" and it can be fit in a 6" diameter pipe or hole) HOME IMPROVEMENT Especially suitable for use with dryer vent hose. Perfect for bathrooms, kitchen, office, garages, sheds, campers, AC, RV, range hood extractors. Ideal for room exhaust and ventilation use.
- EASY INSTALLATION Easy indoor/outdoor installation. Available for wall mounting or ceiling mounting. Dryer vent is fixed in place by 4 included screws. The included rubber gasket minimizes noise.
- HIGH-QUALITY MATERIALS The vent covers for home are made of brushed 304 stainless steel material, are durable, anti-rust and corrosion resistant.
- GREAT FOR HOME USE The flap in dryer vent cover is sealed from one side to prevent air entering the ventilation system. A foam stopper has been installed to the inside of the hood to keep this air vent open and close quietly. And the air vent protects against outdoor noise, birds, rats and rain.
- SUPPORT GUARANTEE We have a 24-month warranty. If you are not satisfied with the product after receiving the product, please contact us directly. We will reply within 4 hours.
- See more on Amazon...
Brand: FRESH SPEED | Manufacturer: FRESH SPEED
See On Amazon #2
AC Infinity 6" Backdraft Damper, One-Way Airflow Ducting Insert with Spring-Loaded Folding Blades for 6 Ducting in Range Hoods and Bathrooms Fans
Asin: B0842XLY96 | Model: AC-BDD6-B | PartNumber: AC-BDD6-B | Ean: 0819137021310 | UPC: 819137021310
Mounts Horizontally Or Vertically To Prevent Backflow And Debris From Entering Ducting..
Fit For 6 In. Duct Openings | Product Length: 5.03 Inches | Finish: Powder Coat.
Galvanized Steel Body With Spring-Loaded Aluminum Damper Blades That Open With Minimal Airflow..
Features Outer Rubber Gaskets That Create An Airtight Seal And Grip Between The Damper And Ducts..
Features
- An antidraft duct insert designed for use with range hoods, bathroom fans and other home HVAC applications.
- Features outer rubber gaskets that create an airtight seal and grip between the damper and ducts.
- Mounts horizontally or vertically to prevent backflow and debris from entering ducting.
- Galvanized steel body with spring-loaded aluminum damper blades that open with minimal airflow.
- Fit for 6 in. Duct Openings | Product Length: 5.03 inches | Finish: Powder Coat
- See more on Amazon...
Brand: AC Infinity | Manufacturer: AC Infinity
Weight: 1.32 Pounds
See On Amazon #3
4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Deflector
Asin: B099KGNZRL
【Function】This Airflow Regulating Backdraft Shutter Fits Over The Td Lip And Is Designed To Improve Ventilation By Preventing Air From Re-Circulating When The Fans Are Not In Use..
【Note】Back Draught Valves Can Be Inserted Into Ventilation Ducts Which Are Flexible Or Non Flexible. Cannot Be Used With Plastic Ducts As The Sizes Are Different. All Dimensions Are Measured Manually, Please Allow 1-3Mm Differences..
【Wide Application】 These Backdraft Dampers Can Be Widely Used In Acs, Exhaust Fans, Extractors, Range Hoods, Heating Ducts, Vents And Other Residential, Commercial And Industrial Applications..
【Installation】The Backdraft Damper Is Installed By Pushing It Into The Ventilation Pipe As Far As It Will Go. The Position Of The Spring Should Be Horizontal When The Flap Is Installed Horizontally So That It Can Be Opened And Closed Optimally. This Also Applies To The Vertical Installation..
Features
- Material The 4 inch backdraft damper is made of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel.
- Installation The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.
- Function This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use.
- Wide Application These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications.
- Note Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different. All dimensions are measured manually, please allow 1-3mm differences.
- See more on Amazon...
Brand: Kikerike | Manufacturer: Kikerike
See On Amazon #4
HG Power 6 Inch Kitchen Exhaust Fan, Powerful Bathroom Fan with Damper, Potable Window Small Fume Extractor Ventilation Fan for Shop, Smoking Room, Garage, Silver
Asin: B0B11JXN7T | Model: YNT-150 | PartNumber: YNT-150
Premium Metal Construction For Durability: Made Of Durable Stainless Steel To Complement Any Home Or Commercial Space. Low Maintenance, Requiring Only Occasional Cleaning. Long Lifespan And Reliability, Ensuring 30,000 Hours Of Efficient And Effective Performance..
Wide Application: Versatile Usage Scenarios, Including Kitchen, Bathroom, Garage, Basement, Home Office, And Commercial Settings. Improve Air Circulation And Ventilation, Providing A Healthier And More Comfortable Living Or Working Environment For You..
Easy Installation: With A Detachable Backdraft Damper, The Fan Can Protect Your Home From Damage. Easy To Mount Onto Any Wall Or Ceiling (Make Sure To Remove The Damper), Making It A Versatile Addition To Your Home Or Workspace..
Energy-Efficient Operation:: The Fan Operates At Just 38W While Providing A Strong Airflow Of 308 Cfm, Reducing Energy Costs Without Compromising Performance..
Features
- Powerful Ventilation Capacity: Equipped with a potent motor and large 6-inch blades, the fan efficiently eliminates smoke, humidity, and odors in various spaces.
- Energy-Efficient Operation:: The fan operates at just 38W while providing a strong airflow of 308 CFM, reducing energy costs without compromising performance.
- Premium Metal Construction for Durability: Made of durable stainless steel to complement any home or commercial space. Low maintenance, requiring only occasional cleaning. Long lifespan and reliability, ensuring 30,000 hours of efficient and effective performance.
- Easy Installation: With a detachable backdraft damper, the fan can protect your home from damage. Easy to mount onto any wall or ceiling (make sure to remove the damper), making it a versatile addition to your home or workspace.
- Wide Application: Versatile usage scenarios, including kitchen, bathroom, garage, basement, home office, and commercial settings. Improve air circulation and ventilation, providing a healthier and more comfortable living or working environment for you.
- See more on Amazon...
Brand: HG Power
Dimensions: 7.50 x 5.90 x 7.50 Inches | Weight: 2.91 pounds
See On Amazon #5
HG Power 8 Inch Exhaust Fan, 576CFM Stainless Steel Kitchen Exhaust Fan, Wall Mounted Garage Ventilation Fan, Basement Extractor Fan with Backdraft Damper for Home Office Commercial Use, Black
Asin: B0CN92WQ5P | Model: 8" | PartNumber: 8"
Energy-Efficient Operation: The Fan Operates At Just 53.5W While Providing A Strong Airflow Of 576 Cfm, Reducing Energy Costs Without Compromising Performance..
Wide Application: Versatile Usage Scenarios, Including Kitchen, Bathroom, Garage, Basement, Home Office, And Commercial Settings. Improve Air Circulation And Ventilation, Providing A Healthier And More Comfortable Living Or Working Environment For You..
Easy Diy Installation: Versatile Design Allows For Simple Self-Installation On Walls Or Ceilings, Saving Time And Installation Expenses..
Premium Metal Construction For Durability: Our 8-Inch Exhaust Fan Boasts A Robust Build Made From High-Quality Metal Steel, Ensuring Long-Lasting Performance..
Features
- Powerful Ventilation Capacity: Equipped with a potent motor and large 8-inch blades, the fan efficiently eliminates smoke, humidity, and odors in various spaces.
- Premium Metal Construction for Durability: Our 8-inch exhaust fan boasts a robust build made from high-quality metal steel, ensuring long-lasting performance.
- Energy-Efficient Operation: The fan operates at just 53.5W while providing a strong airflow of 576 CFM, reducing energy costs without compromising performance.
- Easy DIY Installation: Versatile design allows for simple self-installation on walls or ceilings, saving time and installation expenses.
- Wide Application: Versatile usage scenarios, including kitchen, bathroom, garage, basement, home office, and commercial settings. Improve air circulation and ventilation, providing a healthier and more comfortable living or working environment for you.
- See more on Amazon...
Brand: HG Power
Dimensions: 10.00 x 6.00 x 10.00 inches | Weight: 4.50 Pounds
See On Amazon #6
AC Infinity Wall-Mount Duct Grille Vent for 6-Inch Ducting, White Metal, Heating Cooling Ventilation and Exhaust
Asin: B07MDR2BKB | Model: AC-DGM6-W | PartNumber: AC-DGM6-W | Ean: 0819137020702 | UPC: 819137020702
Features A Collar On The Backside To Attach Ducting To The Mounted Grille..
Ducting Size: 6” | Dimensions: 8.2 X 8.2 X 2.2 In. | Material: Steel.
Includes All Screws And Hardware To Easily Mount To A Cabinet Or Wall..
Heavy-Duty Steel Construction, Painted With Matte-White Powder Coat Finish..
Features
- Designed to be wall mounted and connected to ducting to supply/exhaust air.
- Heavy-Duty steel construction, painted with matte-white powder coat finish.
- Features a collar on the backside to attach ducting to the mounted grille.
- Includes all screws and hardware to easily mount to a cabinet or wall.
- Ducting Size: 6 | Dimensions: 8.2 x 8.2 x 2.2 in. | Material: Steel
- See more on Amazon...
Brand: AC Infinity | Manufacturer: AC Infinity
Dimensions: 2.20 x 8.20 x 8.20 Inches | Weight: 0.11 Pounds
See On Amazon #7
6'' Exhaust Vent Dryer Vent, Hon&Guan Exhaust Vent Soffit Vent 6 Inch Stainless Steel Wall Vent for HVAC System.
Asin: B074BQ8V9S | Model: PH110 | PartNumber: PH110
This Stylish Steel 6 Inch Dryer Vent Outlet Has A Fine Mesh With Protective Effect And A Weather Seal To Prevent Unwanted Leaks And Drafts..
Specifications: Circular Pipe / Hose Fitting Diameter 150Mm (6").
Ideal For All Tumble Dryer Vent Pipes / Hoses, Bathroom Vents & Extractors, Air Conditioning Units, Kitchen Fans & Vents, All Home Wall Vents, Heat Transfer And Ventilation Systems, Gas & Electric Dryers, Cooker Hood Extractors, As Well As A Wide Variety Of Industrial Uses..
Brand New Stainless Steel Bull Nose Round Vent Cover With Grill, Louvres..
Features
- Hon&Guan 6 inch wall vent's -Actual outside diameter:145mm
- Brand new stainless steel bull nose round vent cover with grill, louvres.
- This stylish steel 6 inch dryer vent outlet has a fine mesh with protective effect and a weather seal to prevent unwanted leaks and drafts.
- Ideal for all tumble dryer vent pipes / hoses, bathroom vents & extractors, air conditioning units, kitchen fans & vents, all home wall vents, heat transfer and ventilation systems, gas & electric dryers, cooker hood extractors, as well as a wide variety of industrial uses.
- Specifications: Circular pipe / hose fitting diameter 150mm (6)
- See more on Amazon...
Brand: Hon&Guan | Manufacturer: Hon&Guan
Dimensions: 1.80 x 5.70 x 7.00 Inches | Weight: 0.30 pounds
See On Amazon #8
iPower 4 inch Shutter Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 4" Backdraft Damper, for HVAC Extractor Fan Vent, Range Hoods
Asin: B09L7MNXMF | Model: 4 inch Backdraft Shutter Damper Back | PartNumber: 4 inch Backdraft Shutter Damper Back | Ean: 0840166237205 | UPC: 840166237205
One-Way Airflow Ducting Insert: Back-Flow Valve With 2 Spring-Loaded Wings Prevents The Reverse Airflow Movement Through The Ventilation Duct When The Ventilation System Is Turned Off.
Wide Applications: Back Draught Valves Can Be Inserted Into Ventilation Ducts Which Are Flexible Or Non-Flexible. Designed For Use With Range Hoods, Bathroom Fans, Kitchen And Other Home Hvac Applications. Essential For Hvac Ventilation.
Material: The 4 Inch Backdraft Damper Is Made Out Of A Galvanized Steel, The Flap Leaves Are Made Of Aluminum, While The Axis And Spring Are Made Of Stainless Steel And Can Withstand Temperatures From 14 To 140 °F.
Keep Away From Rattling: It Has An Internal Foam Strip And A Smooth-Running Spring To Keep The Valve Wings From Rattling. The Position Of The Spring Should Be Horizontal For Horizontal Installations So That It Can Open And Close Optimally.
Features
- Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction
- Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally
- One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off
- Material: The 4 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 F
- Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation
- See more on Amazon...
Brand: iPower | Manufacturer: iPower
Dimensions: 6.20 x 4.92 x 4.92 inches
See On Amazon #9
US Stove D6 Cast Iron Damper, 6-Inch
Asin: B000M2VTVK | Model: D6 | PartNumber: D6 | Ean: 0745667253641, 0785934142094, 0012685000060, 0787392918402 | UPC: 012685000060, 785934142094, 787392918402, 745667253641
Genuine Ussc Parts.
Improves Stove Efficiency.
Easy Installation.
Made From Heavy Cast Iron.
Features
- For use with any wood or coal stove
- Made from heavy cast iron
- Genuine USSC parts
- Easy installation
- Improves stove efficiency
- See more on Amazon...
Brand: US Stove | Manufacturer: US Stove Company
Dimensions: 0.00 x 11.00 x 8.50 inches | Weight: 1.00 Pounds
See On Amazon #10
Hooded Wall Vent with Screen and Damper (6 Inch, White)
Asin: B09PB17WS3
Multiple Sizes: This Wall Vent Is Available In 4, 6, 8, And 10 Inch Options To Accommodate A Range Of Different Duct Sizes.
Made In The Usa: This Product Is Proudly Manufactured In The Usa.
Multiple Colors: Choose Between Black, Brown, White, Or Unpainted Steel To Best Match The Existing Style Of Your Home.
Optimal Air Flow: The Wide Mouth Design Of The Hood Is Engineered For Optimal Airflow And Ideal For Use In A Kitchen Range Or Bathroom Exhaust Application. It Comes With An 8 ¼” Long Steel Tube For Wall Mounted Installation..
Features
- QUALITY: This hooded wall vent is constructed from heavy-duty 28 gauge galvanized steel. It features a removable screen and a spring loaded damper with built-in gasket.
- OPTIMAL AIR FLOW: The wide mouth design of the hood is engineered for optimal airflow and ideal for use in a kitchen range or bathroom exhaust application. It comes with an 8 long steel tube for wall mounted installation.
- MULTIPLE SIZES: This wall vent is available in 4, 6, 8, and 10 inch options to accommodate a range of different duct sizes
- MULTIPLE COLORS: Choose between black, brown, white, or unpainted steel to best match the existing style of your home
- MADE IN THE USA: This product is proudly manufactured in the USA
- See more on Amazon...
Brand: Generic | Manufacturer: Roofing Direct
See On Amazon #11
AC Infinity 6" Ducting Take-Off Collar, Galvanized Steel Inlet Flange Starter Collar for 6 Ducting with Dryers and Range Hoods
Asin: B0842XMNTB | Model: AC-DCS6 | PartNumber: AC-DCS6 | Ean: 0819137021297 | UPC: 819137021297
Flat Brim That Lays Flush Against All Flat Surfaces And Creates An Airtight Seal To Keep Particles Out..
Ducting Opening Diameter: 6 Inches | Collar Diameter: 8 Inches | Finish: Zinc Coating.
Galvanized Steel Body That Is Corrosion-Resistant And Can Withstand High Temperatures..
Crimped Rims And Raised Lip On The Duct Opening For Enhanced Grip On Ducting..
Features
- A steel ducting flange designed for such uses like tumble dryers, bathroom fans, and range hoods.
- Crimped rims and raised lip on the duct opening for enhanced grip on ducting.
- Flat brim that lays flush against all flat surfaces and creates an airtight seal to keep particles out.
- Galvanized steel body that is corrosion-resistant and can withstand high temperatures.
- Ducting Opening Diameter: 6 inches | Collar Diameter: 8 inches | Finish: Zinc Coating
- See more on Amazon...
Brand: AC Infinity | Manufacturer: AC Infinity
See On Amazon #12
PATIKIL 6" HVAC Duct Manual Volume Damper, Metal Adjustment Airflow Ducting Backdraft Damper Control for Air Ventilation System
Asin: B0BRK75XSQ | Model: pta220823tt0550 | PartNumber: pta220823tt0550
Instruction: Easy To Install, Just Simply Slide The Volume Damper Into The Pipe You Are Attaching To, And Fix With Pipe Clamp And Tape..
Note: Please Confirm The Outer Diameter Of The Volume Damper Before Placing An Order..
Application: The Manual Volume Damper Is Used For Air Volume Regulation In An Air Ventilation System, Widely Used In Hvac Industry. With That Installed In Your Hvac Systems, You Can Easily Control The Air Flow Rate Or Close Off An Air Duct If Needed, To Some Extent, It Will Increase The Energy Efficiency Of Your System..
Advantage: 1. Made Of Durable Galvanized Iron, Which Has High Hardness And High Temperature Resistance, Not Easy To Deform And Corrosion, Moisture-Proof And Fade Resistant, Can Be Used For A Long Time; 2. The Side Is Designed With A Rotary Handle, Which Can Adjust The Air Volume From Multiple Angles And Is Easy To Operate; 3. The Interface Is Smooth And Flat, Easy To Disassemble And Install. Silicone Rubber Ring Design Can Prevent The Air Duct Valve From Leaking When It Is Closed..
Features
- Outer Diameter of Interface: 147 mm / 5.79 inch; Overall Size: 197 x 1 mm / 7.76 x 0.04 inch (L*T); Color: Silver
- Advantage: 1. Made of durable Galvanized Iron, which has high hardness and high temperature resistance, not easy to deform and corrosion, moisture-proof and fade resistant, can be used for a long time; 2. The side is designed with a rotary handle, which can adjust the air volume from multiple angles and is easy to operate; 3. The interface is smooth and flat, easy to disassemble and install. Silicone rubber ring design can prevent the air duct valve from leaking when it is closed.
- Instruction: Easy to install, just simply slide the volume damper into the pipe you are attaching to, and fix with pipe clamp and tape.
- Application: The manual volume damper is used for air volume regulation in an air ventilation system, widely used in HVAC industry. With that installed in your HVAC systems, you can easily control the air flow rate or close off an air duct if needed, to some extent, it will increase the energy efficiency of your system.
- Note: Please confirm the outer diameter of the volume damper before placing an order.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #13
Handua 6" [Neck Size] Steel Butterfly Damper for Round Ceiling Air Supply Diffuser - Black | Outer Diameter: 7-1/2"
Asin: B0C5X5XXW3 | Model: 1 | PartNumber: 1 | Ean: 0756014668179 | UPC: 756014668179
Efficient Airflow Control - Our Air Diffuser Butterfly Damper Provides Precise And Efficient Airflow Control, Allowing You To Customize The Ventilation In Your Space With Ease. Achieve Optimal Comfort By Regulating The Airflow According To Your Preferences..
Easy Installation - Effortless Installation Is Facilitated By The Inclusion Of Three Screws, Making The Process Quick And Hassle-Free. Small Screw Holes For Attaching Damper To The Diffuser, Large Screw Holes For Mounting The Damper To The Duct Opening..
Quiet And Smooth Operation -With Our Air Vent Damper, Experience Whisper-Quiet Operation And Smooth Airflow Adjustments With Our Advanced Damper Design. Enjoy A Peaceful Environment While Effectively Managing The Airflow In Your Home Or Office, Enhancing Overall Indoor Air Quality With This Round Ceiling Damper..
Durable Construction - Crafted From High-Quality Steel With Durable Powder Paint Coated, Our Ceiling Air Supply Diffuser Damper Is Built To Last. Its Sturdy Construction Ensures Long-Term Durability, Making It A Reliable Choice For Both Residential And Commercial Applications..
Features
- SIZE OPTION - Handua 6 inch damper for ceiling application. This ceiling damper controls air flow for 6" [Neck Size] round ceiling diffuser. Removable adjustment handle for air flow control.
- DURABLE CONSTRUCTION - Crafted from high-quality steel with durable powder paint coated, our ceiling air supply diffuser damper is built to last. Its sturdy construction ensures long-term durability, making it a reliable choice for both residential and commercial applications.
- EFFICIENT AIRFLOW CONTROL - Our air diffuser butterfly damper provides precise and efficient airflow control, allowing you to customize the ventilation in your space with ease. Achieve optimal comfort by regulating the airflow according to your preferences.
- QUIET AND SMOOTH OPERATION -With our air vent damper, experience whisper-quiet operation and smooth airflow adjustments with our advanced damper design. Enjoy a peaceful environment while effectively managing the airflow in your home or office, enhancing overall indoor air quality with this round ceiling damper.
- EASY INSTALLATION - Effortless installation is facilitated by the inclusion of three screws, making the process quick and hassle-free. Small screw holes for attaching damper to the diffuser, large screw holes for mounting the damper to the duct opening.
- See more on Amazon...
Brand: Handua | Manufacturer: Handua
See On Amazon #14
Broan BP87 Vertical Discharge Damper, 7-Inch
Asin: B008S922UG | Model: BP87 | PartNumber: BP87 | Ean: 0026715049899 | UPC: 026715049899
Sturdy To Use.
Made From The Highest Quality Materials.
Helps Keep Your Range Hood Operating At Peak Performance.
Features
- 7-Inch vertical discharge damper
- Helps keep your range hood operating at peak performance
- Sturdy to use
- Made from the highest quality materials
- See more on Amazon...
Brand: Broan | Manufacturer: Broan-NuTone
Dimensions: 0.53 x 0.83 x 0.72 inches | Weight: 0.30 Pounds
See On Amazon #15
neverest RK 4" Professional Backdraft Shutter Damper Connector Duct Fits Only with Metal Ducts
Asin: B011INHF5A | Ean: 4054503005303
✅ Multiple Use Designed For Use In Air Conditioners (Ac), Dryers, Exhaust, Extractor Or Range Hoods, Heating Ducts, Vents, And Other Hvac Applications..
✅ Note Back Draught Valves Can Be Inserted Into Ventilation Ducts Which Are Flexible Or Non-Flexible. Please Note That This Is To Be Installed In Metal Ducts Only. Measure The Diameter Of Your Duct Before Purchasing..
✅ Easy Installation The Backflow Flap Is Installed By Inserting It Into The Ventilation Pipe Until It Stops. The Position Of The Spring Should Be Horizontal For Horizontal Installations So That It Can Open And Close Optimally. The Backdraft Shutter Is Installed So That The Damper Blades Open Only In The Outflowing Air Direction..
✅ Features The Backflow Flap Opens And Closes Automatically At Low Air Volumes. It Has A Smooth-Running Spring And An Internal Foam Strip To Keep The Blades From Rattling And Can Be Installed Horizontally Or Vertically..
Features
- WELL-MADE The 4 inch backdraft damper is made out of a galvanized steel while the flap leaves are made of aluminum. The axis and spring are made of stainless steel, 3.5 inches deep, and can withstand temperatures from 14 to 140 F. The backflow damper prevents the ingress of cold or warm air and wind from entering through the ventilation duct.
- FEATURES The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
- MULTIPLE USE Designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents, and other HVAC applications.
- EASY INSTALLATION The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
- NOTE Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Please note that this is to be installed in metal ducts only. Measure the diameter of your duct before purchasing.
- See more on Amazon...
Brand: neverest | Manufacturer: neverest
Dimensions: 3.94 x 3.46 x 3.94 inches | Weight: 0.31 Pounds
Warranty: 2 years
See On Amazon #16
Therwen Backdraft Damper Duct Manual Volume Damper with Sleeve Stove Pipe Galvanized Sheet Adjustment Airflow Ducting Branch HVAC Air Balancing for Range Hoods, Fans(6 Inch, 2 Pcs)
Asin: B0CDP9KGPF
Use For Air Balance: The Hvac Damper Is A Simple Manual Damper Wrapped In Galvanized Iron Sheet Metal Sleeves; Each Branch Should Be Fitted With An Air Duct Damper To Regulate The Airflow By Adjusting The Position Of The Damper, Which Can Help To Redirect It To Specific Locations In The House; The 6 Inch Backdraft Damper Is Not Completely Sealed, And It Is Applied For Air Balancing, Not Air Termination.
Fit Most Occasions: The 6 Inch Vent Ducting Damper Can Be Applied On Most Occasions Including Air Conditioning, Dryer Vents, Exhausts, Range Hoods, Heating Systems, Fans, Vents And Other Residential, Commercial And Industrial Hvac Applications, Practical Tools To Use.
Easy To Install: You Simply Slide The Air Ducting Damper Into The Pipe And Screw It In An Easy To Adjust Position, Then Hide The Seam With Tape To Complete The Installation; It Is Also Recommended That You Can Seal All Connections With Pipe Sealant To Prevent Air Leakage And Improve The Efficiency Of The Hvac System.
Galvanized Iron Material: The 6 Inch Vent Ducting Damper Is Made Of Quality Galvanized Iron With High Hardness And High Temperature Resistance, Not Easy To Deformation And Corrosion, And Can Effectively Prevent The Air Duct Damper From Moisture And Fading, Which Can Be Applied For A Long Time.
Features
- Suitable Size: the bend end interface of air duct damper measures about 5.87 inches/ 14.92 cm in diameter while the other side is about 6 inches/ 15.24 cm in diameter and the height is about 6.25 inches/ 15.87 cm in height, which is suitable for inserting 6 inch ventilation duct
- Galvanized Iron Material: the 6 inch vent ducting damper is made of quality galvanized iron with high hardness and high temperature resistance, not easy to deformation and corrosion, and can effectively prevent the air duct damper from moisture and fading, which can be applied for a long time
- Use For Air Balance: the HVAC damper is a simple manual damper wrapped in galvanized iron sheet metal sleeves; Each branch should be fitted with an air duct damper to regulate the airflow by adjusting the position of the damper, which can help to redirect it to specific locations in the house; The 6 inch backdraft damper is not completely sealed, and it is applied for air balancing, not air termination
- Easy to Install: you simply slide the air ducting damper into the pipe and screw it in an easy to adjust position, then hide the seam with tape to complete the installation; It is also recommended that you can seal all connections with pipe sealant to prevent air leakage and improve the efficiency of the HVAC system
- Fit Most Occasions: the 6 inch vent ducting damper can be applied on most occasions including air conditioning, dryer vents, exhausts, range hoods, heating systems, fans, vents and other residential, commercial and industrial HVAC applications, practical tools to use
- See more on Amazon...
Brand: Therwen | Manufacturer: Therwen
Dimensions: 7.85 x 12.50 x 9.00 inches
See On Amazon #17
Copkim 4 Pieces 4 Inch Backdraft Damper One Way Airflow Dryer Vent Backflow Preventer Duct Draft Stopper Inline Fan Vent Deflector with 2 Spring Loaded Folding Blades for Range Hoods Bathrooms Kitchen
Asin: B0CC835R8N | Model: LIA-Copkim-0167 | PartNumber: LIA-Copkim-0167
Size For Versatile Use: Air Duct Damper Sports A Convenient Size With A Diameter Of Approximately 3.9 Inches And A Height Of Roughly 3.46 Inches; Crafted To Fit 4 Inch Ducts Well, It Proves Its Versatility In Various Duct Systems, Encouraging More Airflow For Efficient Use.
Easy To Use: Push The Vent Blocker Into The Ventilation Pipe To The End To Install; When The Baffle Is Installed Horizontally, The Position Of The Spring Should Be In A Horizontal Position So That It Can Be Opened And Closed In An Optimal Way; The Flap Opens Under The Pressure Generated By The Airflow, Then It Closes Automatically Under The Action Of Spring; The Return Damper Closes Automatically When The Air Volume Is Low.
Features For Effective Performance: Besides Its Robust Material Composition, The 4 Inch Duct Reducer's Functionality Is Amplified With Its One Way, 2 Spring Loaded Folding Blades; This Allows For Maximum Air Balance, Ensuring Uninterrupted Air Flow In The Desired Direction While Preventing The Reverse; It Can Be Inserted Into Flexible Or Non Flexible Ventilation Ducts; Due To Different Sizes, Can Not Be Applied With Plastic Piping.
Quality Material Composition: 4 Inch Duct Reducer Is Made From Galvanized Steel That Offers Durability To Withstand Different Conditions, Ensuring Longevity; Additionally, The Leaflets Are Made Of Aluminum, And The Shafts And Springs Are Manufactured With Stainless Steel, Ensuring Impeccable Performance And Consistency, And Can Withstand Temperatures From 14 To 140 Fahrenheit Celsius.
Features
- You Can Get: with a package that contains 4 pieces of 4 inch backdraft dampers, it caters to a comprehensive, easy user experience; This bundled package makes it easy to replace or install multiple dampers in different locations at the same time, thereby saving time and effort
- Quality Material Composition: 4 inch duct reducer is made from galvanized steel that offers durability to withstand different conditions, ensuring longevity; Additionally, the leaflets are made of aluminum, and the shafts and springs are manufactured with stainless steel, ensuring impeccable performance and consistency, and can withstand temperatures from 14 to 140 Fahrenheit Celsius
- Size for Versatile Use: air duct damper sports a convenient size with a diameter of approximately 3.9 inches and a height of roughly 3.46 inches; Crafted to fit 4 inch ducts well, it proves its versatility in various duct systems, encouraging more airflow for efficient use
- Features for Effective Performance: besides its robust material composition, the 4 inch duct reducer's functionality is amplified with its one way, 2 spring loaded folding blades; This allows for maximum air balance, ensuring uninterrupted air flow in the desired direction while preventing the reverse; It can be inserted into flexible or non flexible ventilation ducts; Due to different sizes, can not be applied with plastic piping
- Easy to Use: push the vent blocker into the ventilation pipe to the end to install; When the baffle is installed horizontally, the position of the spring should be in a horizontal position so that it can be opened and closed in an optimal way; The flap opens under the pressure generated by the airflow, then it closes automatically under the action of spring; The return damper closes automatically when the air volume is low
- See more on Amazon...
Brand: Copkim | Manufacturer: Copkim
See On Amazon #18
HG Power 6 Inch Exhaust Fan, Kitchen Exhaust Fan With Switch 308CFM Window Exhaust Fan, Wall Mounted Bathroom Exhaust Fan, Extractor Ventilation Fan For Attic, Greenhouse, Basement, Shed, White
Asin: B0CN92JSSD | Model: YJHUS-Exhaust Fan-1 | PartNumber: YJHUS-Exhaust Fan-1
【Premium Material】Made With Durable Baking Varnish Material, The Shell And Impeller Of The Exhaust Fan Guarantee Long-Lasting Durability And Reliability. The Backdraft Damper Design Prevents Polluted Air, Exhaust Gases, And Odors From Returning Into The Room..
【Wide Application】The Window Exhaust Fan Is Designed To Quietly Ventilate Kitchens, Bathrooms, Grow Rooms, Workshops, Basements, Attics, Etc. To Improve Air Circulation In Hvac Ventilation..
【Plug And Play】Kitchen Exhaust Fan Features A Separate Switch For Manual Control Of The Window Fan On/Off, Making It Convenient And Practical To Use Without The Need For Other Tools. 6” Exhaust Fan With An 8.2Ft Power Cord. No More Worrying About Wiring!.
【Excellent Performanc】The Wall Mount Exhaust Fan Has A High Motor That Maximizes Airflow While Reducing Noise And Power Consumption. Reduces Friction And Extends The Extractor Fan's Service Life..
Features
- EFFICIENT VENTILATION With a large airflow capacity of 308 CFM, HG Power 6 inch exhaust fan effectively removes odors, and stale air from your space, creating a fresh and comfortable environment.
- EXCELLENT PERFORMANC The wall mount exhaust fan has a high motor that maximizes airflow while reducing noise and power consumption. Reduces friction and extends the extractor fan's service life.
- PREMIUM MATERIAL Made with durable baking varnish material, the shell and impeller of the exhaust fan guarantee long-lasting durability and reliability. The backdraft damper design prevents polluted air, exhaust gases, and odors from returning into the room.
- PLUG AND PLAY Kitchen exhaust fan features a separate switch for manual control of the window fan ON/OFF, making it convenient and practical to use without the need for other tools. 6 Exhaust fan with an 8.2ft power cord. No more worrying about wiring!
- WIDE APPLICATION The window exhaust fan is designed to quietly ventilate kitchens, bathrooms, grow rooms, workshops, basements, attics, etc. To improve air circulation in HVAC ventilation.
- See more on Amazon...
Brand: HG Power
Dimensions: 8.00 x 8.00 x 6.00 inches
See On Amazon #19
Hon&Guan 6 Inch Backdraft Damper, One-Way Airflow Duct Damper 6 Inch Ducting Insert Backflow Preventer Duct Draft Blocker
Asin: B09WDHGGNV
【Wide Applications】The 6 Inch Duct Draft Blocker Valves Can Be Inserted Into Ventilation Dryer Vent Hose. Designed For Use With Range Hoods, Bathroom Fans, Kitchen And Other Home Hvac Applications..
【Lightweight Valve Wings】The Backdraft Shuttervalve Wings Open Under The Pressure Created By The Airflow; When The Air Flows In The Opposite Direction, It Is Automatically Closed Under The Action Of The Spring, So As To Cut Off The Flow..
【Easy To Install】The Vent Damper 6 Inch Has An Opening Of 150 Mm And A Length Of 88 Mm. When Installed Horizontally, The Springs Should Be Positioned Horizontally To Allow For Optimal Opening And Closing..
【Innovative Features】The One-Way Airflow Duct Draft Stopper Could Prevents Cold Wind And Small Bugs From Entering The Duct. Rubber Ring Ensures 100% Closure And Quietness.
Features
- Quality Material The 6 inch backdraft damper is made of a galvanized steel to withstand temperatures up to 140 F, the axis are made of aluminum, while the spring are made of carbon steel. Rugged and corrosion-resistant to keep you venting smoothly
- Innovative Features The one-way airflow duct draft Stopper could Prevents cold wind and small bugs from entering the duct. Rubber ring ensures 100% closure and quietness
- Wide Applications The 6 inch duct draft blocker valves can be inserted into ventilation dryer vent hose. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications.
- Easy to Install The vent damper 6 inch has an opening of 150 mm and a length of 88 mm. When installed horizontally, the springs should be positioned horizontally to allow for optimal opening and closing.
- Lightweight Valve Wings The backdraft shuttervalve wings open under the pressure created by the airflow; when the air flows in the opposite direction, it is automatically closed under the action of the spring, so as to cut off the flow.
- See more on Amazon...
Brand: Hon&Guan | Manufacturer: Hon&Guan
Dimensions: 3.46 x 3.46 x 5.90 inches | Weight: 0.55 pounds
See On Amazon #20
YOUNTHYE 4 Inch Backdraft Damper, 2PCS Inline Springs Loaded Backflow Preventer Backflow Shutter, One-Way Airflow Ducting Insert for 4 Ducting in Range Hoods and Bathrooms Fans
Asin: B093QBB96J | Model: 4 Inch Backdraft Damper | PartNumber: 4 Inch Backdraft Damper | Ean: 0696629987305 | UPC: 696629987305
Preventing Unwanted Drafts - 4Inch Backdraft Damper Opens And Closes Automatically To Prevent Backflow And Debris From Entering Ducting..
Easy To Installation - The 4 Inch Duct Damper Is Installed By Pushing It Into The Ventilation Pipe As Far As It Will Go. The Position Of The Spring Should Be Horizontal When The Flap Is Installed Horizontally So That It Can Be Opened And Closed Optimally. This Also Applies To The Vertical Installation..
Application Scenarios - 4 Backdraft Damper Fit For 4" Duct Openings. Backdraft Damper 4 Inch Designed For Use With Range Hoods, Bathroom Fans And Other Home Hvac Applications. Not For Use In Plastic Ducts..
Durable & Premium - 4 Backdraft Damper Is Made Of Galvanized Steel And The Dryer Vent Valve Flaps Are Made Of Aluminium The Butterfly Damper Axis And Spring Are Made Of Stainless Steel..
Features
- Size of Backdraft Damper - 4 inch/ 100mm in diameter, 3.5inch/ 88mm in length, 0.5MM/0.02 inch in thickness, 2 in package. Please confirm the size before purchase.
- Durable & Premium - 4 backdraft damper is made of galvanized steel and the dryer vent valve flaps are made of aluminium the butterfly damper axis and spring are made of stainless steel.
- Preventing Unwanted Drafts - 4inch backdraft damper opens and closes automatically to prevent backflow and debris from entering ducting.
- Application Scenarios - 4 backdraft damper fit for 4 Duct Openings. Backdraft damper 4 inch designed for use with range hoods, bathroom fans and other home HVAC applications. Not for use in plastic ducts.
- Easy to Installation - The 4 inch duct damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.
- See more on Amazon...
Brand: YOUNTHYE
See On Amazon
Looking For Something Else?
Search