Bistook Battery Holder DIY,1 Slot 21700 Battery Holder Box Case-Protection Caps,No Soldering,Brass Contacts Storage Case with Transparent Cover for DIY,6-Pack
Asin: B0CFQRW61J | Model: 001 | PartNumber: 001 | Ean: 0760627231156 | UPC: 760627231156
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Flexible Use: Each 21700 Battery Slot Is Equipped With A Transparent Plastic Cover, Which Can Better Fix The Battery. You Can Also Splice Infinitely According To Your Own Electronic Needs And Give Full Play To Your Creativity.
Warm Tips：This Product Is Suitable For Diy And Does Not Include Batteries. It's Best To Use A Consumer 21700 Flat Head Battery..
Widely Applications: It Can Be Applied To Diy Electronics According To Your Needs. You Can Also Add Your Own Circuit Board To Convert The Battery Box Into A Power Bank. This Battery Holder Case Can Unleash Your Creativity..
Protective Accessories: The Two Sides Of The Diy Battery Storage Case Are With A Protective Shell With A Mortise And Tenon Structure, Which Effectively Prevents Contact With Conductive Surfaces, And Protects The Device Safely And Reliably..
Features
- Material: The battery holder is made of PC+ABS material, and the positive and negative terminals are supported by pure copper M3 screws, which can effectively reduce the resistance. Support 5A(Max) high current.
- Protective accessories: The two sides of the DIY battery storage case are with a protective shell with a mortise and tenon structure, which effectively prevents contact with conductive surfaces, and protects the device safely and reliably.
- Flexible use: Each 21700 battery slot is equipped with a transparent plastic cover, which can better fix the battery. You can also splice infinitely according to your own electronic needs and give full play to your creativity
- Widely Applications: It can be applied to DIY electronics according to your needs. You can also add your own circuit board to convert the battery box into a power bank. This battery holder case can unleash your creativity.
- Warm tips This product is suitable for DIY and does not include batteries. It's best to use a consumer 21700 flat head battery.
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 0.93 x 4.48 x 1.04 inches | Weight: 0.04 Pounds
See On Amazon Similar To Bistook Battery Holder DIY1 Slot
#1
Bistook 21700 Battery Holder Box Case for PCB Projects, 4-Pack, 2-Slot Each
Asin: B0BSDC7L9T | Model: Bis-21700-2 slots 01 | PartNumber: Bis-21700-2 slots 01 | Ean: 0662659953542 | UPC: 662659953542
High-Quality Material &Easy Conductivity：The 21700 Battery Holder Is Made Of Pc+Abs Material, Which Is Durable And Long-Lasting.It Features Nickel-Plated Positive And Negative Terminals With Good Conductivity And Excellent Solderability.
Warm Tips：Batteries Are Not Included. It's Best To Use A Consumer 21700 Battery With A Button Cap.The Battery Holder Is Nickel-Plated. Please Avoid Using It Under High Temperature Conditions And Do Not Bend The Pins.The Battery Must Be Installed With The Positive Pole First, And Then The Negative Pole! To Remove The Battery, You Must Remove It From The Negative Pole, And It Is Forbidden To Remove It From The Positive Pole Of The Battery! Otherwise, There Is A Risk Of Short Circuit!.
Easy To Carry & Wide Application：The Compact Design Of The 21700 Battery Holder Case Is Easy To Carry, Whether You Are At Home Or Outdoors, You Can Use It For Various Electronic Projects. The Battery Holder Can Be Applied In Electronic Diy According To Your Needs, And Is Suitable For Various Pcb Projects..
Easy Installation & Removal： The 21700 Battery Slot Is Designed For Easy Installation.You Only Need To Install The Battery Easily, And Then It Can Be Used With The Pcb Board.When You Need To Remove The Battery, Simply Take It Out..
Features
- 4-Pack with 2-Slot Design The 21700 Battery Holder Slot comes in 4-pack, with each holder featuring 2 slots,which can accommodate four 3.7V 21700 flat-top cylindrical lithium batteries. It allows you to easily organize and secure your 21700 batteries for PCB Projects.
- Easy installation & Removal The 21700 Battery Slot is designed for easy installation.you only need to install the battery easily, and then it can be used with the PCB board.When you need to remove the battery, simply take it out.
- High-Quality Material &Easy Conductivity The 21700 Battery Holder is made of PC+ABS material, which is durable and long-lasting.It features nickel-plated positive and negative terminals with good conductivity and excellent solderability
- Easy to Carry & Wide Application The compact design of the 21700 Battery Holder Case is easy to carry, whether you are at home or outdoors, you can use it for various electronic projects. The battery holder can be applied in electronic DIY according to your needs, and is suitable for various PCB projects.
- Warm Tips Batteries are not included. It's best to use a consumer 21700 battery with a button cap.The battery holder is nickel-plated. Please avoid using it under high temperature conditions and do not bend the pins.The battery must be installed with the positive pole first, and then the negative pole! To remove the battery, you must remove it from the negative pole, and it is forbidden to remove it from the positive pole of the battery! Otherwise, there is a risk of short circuit!
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 0.86 x 3.27 x 3.46 inches | Weight: 0.14 Pounds
Warranty: 1 year manufacturer
See On Amazon #2
Bistook 18650 Battery Holder - Brass Contacts, No Soldering, Interlock Design, 6-Pack
Asin: B0BQWLWMP9 | Model: Bis-18650-DIY-1 | PartNumber: Bis-18650-DIY-1 | Ean: 0663250592796 | UPC: 663250592796
Premium Quality Materials: Crafted From Durable Pc+Abs Material, With Pure Copper M3 Screws For Positive And Negative Terminals, This Holder Minimizes Resistance. It Supports A High Current Of Up To 5A (Max) And Allows Hassle-Free Use Without Soldering..
Customer Care And Assurance: Suitable For Diy Enthusiasts; Batteries Not Included. We Recommend Using Consumer-Grade 18650 Flat-Top Lithium Batteries. This Product Comes With A 30-Day Return Policy For A Full Refund Or Replacement In Case Of Any Issues. For Inquiries, Our Team Is Available 24/7 To Provide Prompt And Satisfactory Solutions..
Broad Applicability: Specifically Designed For Single 18650 3.7V Flat-Top Cylindrical Lithium Batteries. Easily Transform The Battery Box Into A Portable Power Bank By Adding A Circuit Board. Ideal For Various Electronic Projects, This Holder Not Only Sparks Creativity But Also Delivers Convenience And Satisfaction..
Innovative Interlocking Design: Each Battery Case Features A Clear Cover For Added Protection, Enabling Unlimited Stacking And Creative Combinations, Reminiscent Of Building Blocks..
Features
- Versatile Connection Options: Our 18650 battery holder can be linked in series or parallel, offering flexible configurations with included copper connectors to meet diverse needs.
- Innovative Interlocking Design: Each battery case features a clear cover for added protection, enabling unlimited stacking and creative combinations, reminiscent of building blocks.
- Premium Quality Materials: Crafted from durable PC+ABS material, with pure copper M3 screws for positive and negative terminals, this holder minimizes resistance. It supports a high current of up to 5A (max) and allows hassle-free use without soldering.
- Broad Applicability: Specifically designed for single 18650 3.7V flat-top cylindrical lithium batteries. Easily transform the battery box into a portable power bank by adding a circuit board. Ideal for various electronic projects, this holder not only sparks creativity but also delivers convenience and satisfaction.
- Customer Care and Assurance: Suitable for DIY enthusiasts; batteries not included. We recommend using consumer-grade 18650 flat-top lithium batteries. This product comes with a 30-day return policy for a full refund or replacement in case of any issues. For inquiries, our team is available 24/7 to provide prompt and satisfactory solutions.
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 0.59 x 3.67 x 0.95 Inches | Weight: 0.26 Pounds
Warranty: 1 year manufacturer
See On Amazon #3
Bistook 21700 Battery Holder Box Case for PCB Projects, 10-Pack, 1-Slot Each
Asin: B0BSC61X69 | Model: Bis-21700-1slots-01 | PartNumber: Bis-21700-1slots-01 | Ean: 0663250659000 | UPC: 663250659000
High-Quality Material &Easy Conductivity：The 21700 Battery Holder Is Made Of Pc+Abs Material, Which Is Durable And Long-Lasting.It Features Nickel-Plated Positive And Negative Terminals With Good Conductivity And Excellent Solderability..
Warm Tips：Batteries Are Not Included. It's Best To Use A Consumer 21700 Battery With A Button Cap.The Battery Holder Is Nickel-Plated. Please Avoid Using It Under High Temperature Conditions And Do Not Bend The Pins.The Battery Must Be Installed With The Positive Pole First, And Then The Negative Pole! To Remove The Battery, You Must Remove It From The Negative Pole, And It Is Forbidden To Remove It From The Positive Pole Of The Battery! Otherwise, There Is A Risk Of Short Circuit!.
Easy To Carry & Wide Application：The Compact Design Of The 21700 Battery Holder Case Is Easy To Carry, Whether You Are At Home Or Outdoors, You Can Use It For Various Electronic Projects. The Battery Holder Can Be Applied In Electronic Diy According To Your Needs, And Is Suitable For Various Pcb Projects..
Easy Installation & Removal： The 21700 Battery Slot Is Designed For Easy Installation.You Only Need To Install The Battery Easily, And Then It Can Be Used With The Pcb Board.When You Need To Remove The Battery, Simply Take It Out..
Features
- 10-Pack with 1-Slot Design The 21700 Battery Holder Slot comes in 10-pack, with each holder featuring 1 slots,which can accommodate 3.7V 21700 flat-top cylindrical lithium batteries. It allows you to easily organize and secure your 21700 batteries for PCB Projects.
- Easy installation & Removal The 21700 Battery Slot is designed for easy installation.you only need to install the battery easily, and then it can be used with the PCB board.When you need to remove the battery, simply take it out.
- High-Quality Material &Easy Conductivity The 21700 Battery Holder is made of PC+ABS material, which is durable and long-lasting.It features nickel-plated positive and negative terminals with good conductivity and excellent solderability.
- Easy to Carry & Wide Application The compact design of the 21700 Battery Holder Case is easy to carry, whether you are at home or outdoors, you can use it for various electronic projects. The battery holder can be applied in electronic DIY according to your needs, and is suitable for various PCB projects.
- Warm Tips Batteries are not included. It's best to use a consumer 21700 battery with a button cap.The battery holder is nickel-plated. Please avoid using it under high temperature conditions and do not bend the pins.The battery must be installed with the positive pole first, and then the negative pole! To remove the battery, you must remove it from the negative pole, and it is forbidden to remove it from the positive pole of the battery! Otherwise, there is a risk of short circuit!
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 0.86 x 3.27 x 0.94 Inches | Weight: 0.21 Pounds
Warranty: 1 year manufacturer
See On Amazon #4
Bistook 21700 Battery Holder Box Case for PCB Projects, 4-Pack, 4-Slot Each
Asin: B0BSC7PDHH | Model: Bis-21700-4 slots 01 | PartNumber: Bis-21700-4 slots 01 | Ean: 0663250659031 | UPC: 663250659031
High-Quality Material &Easy Conductivity：The 21700 Battery Holder Is Made Of Pc+Abs Material, Which Is Durable And Long-Lasting.It Features Nickel-Plated Positive And Negative Terminals With Good Conductivity And Excellent Solderability..
Warm Tips：Batteries Are Not Included. It's Best To Use A Consumer 21700 Battery With A Button Cap.The Battery Holder Is Nickel-Plated. Please Avoid Using It Under High Temperature Conditions And Do Not Bend The Pins.The Battery Must Be Installed With The Positive Pole First, And Then The Negative Pole! To Remove The Battery, You Must Remove It From The Negative Pole, And It Is Forbidden To Remove It From The Positive Pole Of The Battery! Otherwise, There Is A Risk Of Short Circuit!.
Easy To Carry & Wide Application：The Compact Design Of The 21700 Battery Holder Case Is Easy To Carry, Whether You Are At Home Or Outdoors, You Can Use It For Various Electronic Projects. The Battery Holder Can Be Applied In Electronic Diy According To Your Needs, And Is Suitable For Various Pcb Projects..
Easy Installation & Removal： The 21700 Battery Slot Is Designed For Easy Installation.You Only Need To Install The Battery Easily, And Then It Can Be Used With The Pcb Board.When You Need To Remove The Battery, Simply Take It Out..
Features
- 4-Pack with 4-Slot Design The 21700 Battery Holder Slot comes in 4-pack, with each holder featuring 4 slots,which can accommodate four 3.7V 21700 flat-top cylindrical lithium batteries. It allows you to easily organize and secure your 21700 batteries for PCB Projects.
- Easy installation & Removal The 21700 Battery Slot is designed for easy installation.you only need to install the battery easily, and then it can be used with the PCB board.When you need to remove the battery, simply take it out.
- High-Quality Material &Easy Conductivity The 21700 Battery Holder is made of PC+ABS material, which is durable and long-lasting.It features nickel-plated positive and negative terminals with good conductivity and excellent solderability.
- Easy to Carry & Wide Application The compact design of the 21700 Battery Holder Case is easy to carry, whether you are at home or outdoors, you can use it for various electronic projects. The battery holder can be applied in electronic DIY according to your needs, and is suitable for various PCB projects.
- Warm Tips Batteries are not included. It's best to use a consumer 21700 battery with a button cap.The battery holder is nickel-plated. Please avoid using it under high temperature conditions and do not bend the pins.The battery must be installed with the positive pole first, and then the negative pole! To remove the battery, you must remove it from the negative pole, and it is forbidden to remove it from the positive pole of the battery! Otherwise, there is a risk of short circuit!
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 0.86 x 3.27 x 3.46 inches | Weight: 0.25 Pounds
Warranty: 1 year manufacturer
See On Amazon #5
Bistook 21700 Battery Holder - Brass Contacts, No Soldering, Interlock Design, 6-Pack
Asin: B0BSC7PZD5 | Model: Bis-21700-DIY1 | PartNumber: Bis-21700-DIY1 | Ean: 0663250659055 | UPC: 663250659055
Premium Quality Materials: Crafted From Durable Pc+Abs Material, With Pure Copper M3 Screws For Positive And Negative Terminals, This Holder Minimizes Resistance. It Supports A High Current Of Up To 5A (Max) And Allows Hassle-Free Use Without Soldering..
Customer Care And Assurance: Suitable For Diy Enthusiasts; Batteries Not Included. We Recommend Using Consumer-Grade 21700 Flat-Top Lithium Batteries. This Product Comes With A 30-Day Return Policy For A Full Refund Or Replacement In Case Of Any Issues. For Inquiries, Our Team Is Available 24/7 To Provide Prompt And Satisfactory Solutions..
Broad Applicability: Specifically Designed For Single 21700 3.7V Flat-Top Cylindrical Lithium Batteries. Easily Transform The Battery Box Into A Portable Power Bank By Adding A Circuit Board. Ideal For Various Electronic Projects, This Holder Not Only Sparks Creativity But Also Delivers Convenience And Satisfaction..
Innovative Interlocking Design: Each Battery Case Features A Clear Cover For Added Protection, Enabling Unlimited Stacking And Creative Combinations, Reminiscent Of Building Blocks..
Features
- Versatile Connection Options: Our 21700 battery holder can be linked in series or parallel, offering flexible configurations with included copper connectors to meet diverse needs.
- Innovative Interlocking Design: Each battery case features a clear cover for added protection, enabling unlimited stacking and creative combinations, reminiscent of building blocks.
- Premium Quality Materials: Crafted from durable PC+ABS material, with pure copper M3 screws for positive and negative terminals, this holder minimizes resistance. It supports a high current of up to 5A (max) and allows hassle-free use without soldering.
- Broad Applicability: Specifically designed for single 21700 3.7V flat-top cylindrical lithium batteries. Easily transform the battery box into a portable power bank by adding a circuit board. Ideal for various electronic projects, this holder not only sparks creativity but also delivers convenience and satisfaction.
- Customer Care and Assurance: Suitable for DIY enthusiasts; batteries not included. We recommend using consumer-grade 21700 flat-top lithium batteries. This product comes with a 30-day return policy for a full refund or replacement in case of any issues. For inquiries, our team is available 24/7 to provide prompt and satisfactory solutions.
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 0.66 x 3.91 x 1.07 inches | Weight: 0.32 Pounds
Warranty: 1 year manufacturer
See On Amazon #6
Bistook 10-Pack AAA Battery Holder, Flexible 1-Slot, Interlockable Design, Customizable for Series & Parallel, Compact & Robust for DIY Projects, Black
Asin: B0BRNQBSH7 | Model: 1*1.5V AAA 01 | PartNumber: 1*1.5V AAA 01 | Ean: 0663250592819 | UPC: 663250592819
Durable Construction: Crafted From High-Quality Pc+Abs Materials, Bistook Aaa Battery Holders Promise Longevity And Consistent Performance, Even Under Frequent Use..
User-Friendly Installation: Designed With Pin Connectors For Effortless Soldering And Setup, Making It Accessible For Hobbyists Of All Skill Levels..
Compact And Portable: Each Holder's Sleek And Lightweight Design Makes It Ideal For A Variety Of Electronic Devices And Applications, Providing Convenience Without Sacrificing Quality..
Customizable Connections: Tailor Your Power Needs With Ease. These Holders Allow For Creative Series And Parallel Arrangements, Offering Endless Possibilities For Diy Enthusiasts And Professionals Alike..
Features
- Innovative Interlocking Design: Experience the versatility with Bistook's unique AAA battery holder, featuring a 1-slot design that can be interlocked both horizontally and vertically to fit any project layout.
- Customizable Connections: Tailor your power needs with ease. These holders allow for creative series and parallel arrangements, offering endless possibilities for DIY enthusiasts and professionals alike.
- Durable Construction: Crafted from high-quality PC+ABS materials, Bistook AAA battery holders promise longevity and consistent performance, even under frequent use.
- Compact and Portable: Each holder's sleek and lightweight design makes it ideal for a variety of electronic devices and applications, providing convenience without sacrificing quality.
- User-Friendly Installation: Designed with pin connectors for effortless soldering and setup, making it accessible for hobbyists of all skill levels.
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 0.50 x 2.16 x 0.61 Inches | Weight: 0.13 Pounds
Warranty: 1 year manufacturer
See On Amazon #7
Bistook 21700 Battery Holder Box Case for PCB Projects, 4-Pack, 3-Slot Each
Asin: B0BSC8HLB9 | Model: Bis-21700-3 slots 01 | PartNumber: Bis-21700-3 slots 01 | Ean: 0663250659024 | UPC: 663250659024
High-Quality Material &Easy Conductivity：The 21700 Battery Holder Is Made Of Pc+Abs Material, Which Is Durable And Long-Lasting.It Features Nickel-Plated Positive And Negative Terminals With Good Conductivity And Excellent Solderability..
Warm Tips：Batteries Are Not Included. It's Best To Use A Consumer 21700 Battery With A Button Cap.The Battery Holder Is Nickel-Plated. Please Avoid Using It Under High Temperature Conditions And Do Not Bend The Pins.The Battery Must Be Installed With The Positive Pole First, And Then The Negative Pole! To Remove The Battery, You Must Remove It From The Negative Pole, And It Is Forbidden To Remove It From The Positive Pole Of The Battery! Otherwise, There Is A Risk Of Short Circuit!.
Easy To Carry & Wide Application：The Compact Design Of The 21700 Battery Holder Case Is Easy To Carry, Whether You Are At Home Or Outdoors, You Can Use It For Various Electronic Projects. The Battery Holder Can Be Applied In Electronic Diy According To Your Needs, And Is Suitable For Various Pcb Projects..
Easy Installation & Removal： The 21700 Battery Slot Is Designed For Easy Installation.You Only Need To Install The Battery Easily, And Then It Can Be Used With The Pcb Board.When You Need To Remove The Battery, Simply Take It Out..
Features
- 4-Pack with 3-Slot Design The 21700 Battery Holder Slot comes in 4-pack, with each holder featuring 3 slots,which can accommodate 3x3.7V 21700 flat-top cylindrical lithium batteries. It allows you to easily organize and secure your 21700 batteries for PCB Projects.
- Easy installation & Removal The 21700 Battery Slot is designed for easy installation.you only need to install the battery easily, and then it can be used with the PCB board.When you need to remove the battery, simply take it out.
- High-Quality Material &Easy Conductivity The 21700 Battery Holder is made of PC+ABS material, which is durable and long-lasting.It features nickel-plated positive and negative terminals with good conductivity and excellent solderability.
- Easy to Carry & Wide Application The compact design of the 21700 Battery Holder Case is easy to carry, whether you are at home or outdoors, you can use it for various electronic projects. The battery holder can be applied in electronic DIY according to your needs, and is suitable for various PCB projects.
- Warm Tips Batteries are not included. It's best to use a consumer 21700 battery with a button cap.The battery holder is nickel-plated. Please avoid using it under high temperature conditions and do not bend the pins.The battery must be installed with the positive pole first, and then the negative pole! To remove the battery, you must remove it from the negative pole, and it is forbidden to remove it from the positive pole of the battery! Otherwise, there is a risk of short circuit!
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 0.86 x 3.27 x 3.46 Inches | Weight: 0.20 pounds
Warranty: 1 year manufacturer
See On Amazon #8
Bistook 21700 Battery Holder Box Case for PCB Projects, 2-Pack, 1-Slot Each, 2-Pack, 2-Slot Each, 2-Pack, 3-Slot Each, 2-Pack, 4-Slot Each
Asin: B0BY9NHXN8 | Model: Bis-21700-1234slots-01 | PartNumber: Bis-21700-1234slots-01 | Ean: 0760627179175 | UPC: 760627179175
Feature: The Battery Holder Has One Compartments Or Chambers For Holding One 3.7V Battery. It Is Easy To Solder And Conduct Electricity!.
You Will Get 8 Battery Slots, Which Consist Of 2 Slots 1, 2 Slots 2, 2 Slots 3, And 2 Slots 4..
Prompts: Batteries Not Included. You Had Better Use Consumer Type 21700 Cell With Button Cap To Get Good Electricity Conductivity Of Positive And Terminal Of Box..
In Order To Prevent The Battery From Falling Off After Installation, The Battery Box Is Designed With Curved Flying Wings, So It Is Difficult To Disassemble The Battery After It Is Installed, And Plastic Auxiliary Tools Are Required, Please Pay Attention. In Addition, When Using The Battery Slot, Please Install The Positive Pole First, Then The Negative Pole. When Removing The Battery, Remove The Negative Pole First, Then The Positive Pole..
Function: Keeping Your Standard Or Rechargeable Batteries Together And Safe..
Advantage: The Battery Holders Are Made Of Pc+Abs High Quality Material. Small Size, Easy To Carry. Easy And Convenient To Use..
Features
- important! It is suitable for 21700 flat-head cylindrical lithium batteries, with a length of 70mm and a diameter of 21mm. The battery must be installed from the positive pole, then the negative pole! To disassemble the battery, it must be disassembled from the negative pole, and it is forbidden to disassemble from the positive pole of the battery! Otherwise there is a risk of short circuit!
- Advantage: The battery holders are made of PC+ABS high quality material. Small size, easy to carry. Easy and convenient to use.
- Feature: The battery holder has one compartments or chambers for holding one 3.7V battery. It is easy to solder and conduct electricity!
- Function: Keeping your standard or rechargeable batteries together and safe.
- Prompts: Batteries Not Included. You had better use consumer type 21700 cell with button cap to get good electricity conductivity of positive and terminal of box.
- In order to prevent the battery from falling off after installation, the battery box is designed with curved flying wings, so it is difficult to disassemble the battery after it is installed, and plastic auxiliary tools are required, please pay attention. In addition, when using the battery slot, please install the positive pole first, then the negative pole. When removing the battery, remove the negative pole first, then the positive pole.
- You will get 8 battery slots, which consist of 2 slots 1, 2 slots 2, 2 slots 3, and 2 slots 4.
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 0.86 x 3.27 x 0.94 inches | Weight: 0.33 Pounds
Warranty: 1 year manufacturer
See On Amazon #9
Bistook DIY Energy Storage Kit 18650 Battery Holder Case Box Bracket Slot PC+ABS Plastic Material,Support 2S3P 3S2P 1S6P Splicable No Soldering Support High Current 2pcs (2pcs 2 * 3 Slots)
Asin: B0BZL6X6XS | Model: 18650-2301 | PartNumber: 18650-2301 | Ean: 0760627179311 | UPC: 760627179311
No Soldering Required: This 18650 Battery Holder Case Kit Does Not Require Soldering And Can Be Assembled Quickly And Easily. This Makes It Safer To Use, As No Welding Tools Are Needed..
Warm Tips：Batteries Are Not Included. It's Best To Use A 18650 Flat-Head Lithium Battery.This Item Can Be Returned In Its Original Condition For A Full Refund Or Replacement Within 30 Days Of Receipt If There's Anything Wrong With The Product..
Function: The Battery Case Slot Kit Can Carry Six 3.7V Batteries,And Its Positive And Negative Electrodes Are Made Of Pure Copper M3 Screws, Which Can Effectively Reduce Resistance.It Supports 10~20A Current And High Current Output, Greatly Improving The Working Efficiency Of The Battery And Making The Product Last Longer..
Multiple Splicing Methods:The Diy Energy Storage Shell Kit Supports Multiple Battery Splicing Methods,Such As 1S6p（3.7V）,2S3p（7.4V），3S2p（11.1V）.It Can Be Used With A Protection Board, Which Can Meet Different Power Requirements.
Features
- Materials:The 18650 Energy Storage Bracket Kit is made of PC+ABS high quality plastic, which are durable and have strong mechanical performance.
- Multiple splicing methods:The DIY energy storage shell kit supports multiple battery splicing methods,such as 1S6P 3.7V ,2S3P 7.4V 3S2P 11.1V .It can be used with a protection board, which can meet different power requirements
- No soldering required: This 18650 battery holder case kit does not require soldering and can be assembled quickly and easily. This makes it safer to use, as no welding tools are needed.
- Function: The battery case slot kit can carry six 3.7V batteries,and its positive and negative electrodes are made of pure copper M3 screws, which can effectively reduce resistance.It supports 10~20A current and high current output, greatly improving the working efficiency of the battery and making the product last longer.
- Warm Tips Batteries are not included. It's best to use a 18650 flat-head lithium battery.This item can be returned in its original condition for a full refund or replacement within 30 days of receipt if there's anything wrong with the product.
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 3.98 x 2.64 x 1.93 inches | Weight: 0.53 Pounds
Warranty: 1 year manufacturer
See On Amazon #10
Bistook DIY Energy Storage Kit 18650 Battery Holder Case Box Bracket Slot PC+ABS Plastic Material,Support 1S8P 2S4P 4S2P 8S1P Splicable No Soldering Support High Current 2pcs (2pcs 2 * 4 Slots)
Asin: B0BZL8ZVCL | Model: 18650-2401 | PartNumber: 18650-2401 | Ean: 0760627230913 | UPC: 760627230913
No Soldering Required: This Battery Holder 18650 Case Kit Does Not Require Soldering And Can Be Assembled Quickly And Easily. This Makes It Safer To Use, As No Welding Tools Are Needed..
Warm Tips：Batteries Are Not Included. It's Best To Use A 18650 Flat-Head Lithium Battery.This Item Can Be Returned In Its Original Condition For A Full Refund Or Replacement Within 30 Days Of Receipt If There's Anything Wrong With The Product..
Function: The Battery Case Slot Kit Can Carry Four 3.7V Batteries,And Its Positive And Negative Electrodes Are Made Of Pure Copper M3 Screws, Which Can Effectively Reduce Resistance.It Supports 10~20A Current And High Current Output, Greatly Improving The Working Efficiency Of The Battery And Making The Product Last Longer..
Multiple Splicing Methods:The Diy Energy Storage Shell Kit Supports Multiple Battery Splicing Methods,Such As 1S8p（3.7V）,2S4p（7.4V），4S2p（14.8V）,8S1p(29.6V).It Can Be Used With A Protection Board, Which Can Meet Different Power Requirements.
Features
- Materials:The 18650 Energy Storage Bracket Kit is made of PC+ABS high quality plastic, which are durable and have strong mechanical performance.
- Multiple splicing methods:The DIY energy storage shell kit supports multiple battery splicing methods,such as 1S8P 3.7V ,2S4P 7.4V 4S2P 14.8V ,8S1P(29.6V).It can be used with a protection board, which can meet different power requirements
- No soldering required: This battery holder 18650 case kit does not require soldering and can be assembled quickly and easily. This makes it safer to use, as no welding tools are needed.
- Function: The battery case slot kit can carry four 3.7V batteries,and its positive and negative electrodes are made of pure copper M3 screws, which can effectively reduce resistance.It supports 10~20A current and high current output, greatly improving the working efficiency of the battery and making the product last longer.
- Warm Tips Batteries are not included. It's best to use a 18650 flat-head lithium battery.This item can be returned in its original condition for a full refund or replacement within 30 days of receipt if there's anything wrong with the product.
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 3.98 x 3.35 x 1.93 inches | Weight: 0.71 Pounds
Warranty: 1 year manufacturer
See On Amazon #11
Bistook 2Pcs 4 Slots with PCB 21700 Battery Holder 4 Slots x 3.7V for 4x21700 Case Plastic Battery Storage Box with Pin Includes Insulating Posts and Ribbon 2 Pack (2 Pcs 4 Solts)
Asin: B0BZDW71S8 | Model: Bis-21700-4 slots B4 | PartNumber: Bis-21700-4 slots B4 | Ean: 0760627179236 | UPC: 760627179236
Function: Keeping Your Standard Or Rechargeable Batteries Together And Safe..
Important：The Battery Must Be Installed From The Positive Pole, Then The Negative Pole! To Disassemble The Battery, It Must Be Disassembled From The Negative Pole, And It Is Forbidden To Disassemble From The Positive Pole Of The Battery!.
Prompts: It Is Suitable For 21700 Flat-Head Cylindrical Lithium Batteries, With A Length Of 70Mm And A Diameter Of 21Mm..
Feature: The Battery Holder Has Holding Four 3.7V Battery. It Is Easy To Solder And Conduct Electricity!.
Features
- Advantage: The battery holders are made of PC+ABS high quality material. Small size, easy to carry. Easy and convenient to use.
- Feature: The battery holder has holding four 3.7V battery. It is easy to solder and conduct electricity!
- Function: Keeping your standard or rechargeable batteries together and safe.
- Prompts: It is suitable for 21700 flat-head cylindrical lithium batteries, with a length of 70mm and a diameter of 21mm.
- important The battery must be installed from the positive pole, then the negative pole! To disassemble the battery, it must be disassembled from the negative pole, and it is forbidden to disassemble from the positive pole of the battery!
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 1.22 x 3.82 x 3.86 inches | Weight: 0.28 Pounds
Warranty: 1 year manufacturer
See On Amazon #12
Bistook 2Pcs 2 Slots with PCB 21700 Battery Holder 2 Slots x 3.7V for 2x21700 Case Plastic Battery Storage Box with Pin Includes Insulating Posts and Ribbon 2 Pack (2 Pcs 2 Solts)
Asin: B0C13R8M2P | Model: Bis-21700-4 slots B2 | PartNumber: Bis-21700-4 slots B2 | Ean: 0760627231071 | UPC: 760627231071
Function: Keeping Your Standard Or Rechargeable Batteries Together And Safe..
Important：The Battery Must Be Installed From The Positive Pole, Then The Negative Pole! To Disassemble The Battery, It Must Be Disassembled From The Negative Pole, And It Is Forbidden To Disassemble From The Positive Pole Of The Battery!.
Prompts: It Is Suitable For 21700 Flat-Head Cylindrical Lithium Batteries, With A Length Of 70Mm And A Diameter Of 21Mm..
Feature: The Battery Holder Has Holding Three 3.7V Battery. It Is Easy To Solder And Conduct Electricity!.
Features
- Advantage: The battery holders are made of PC+ABS high quality material. Small size, easy to carry. Easy and convenient to use.
- Feature: The battery holder has holding three 3.7V battery. It is easy to solder and conduct electricity!
- Function: Keeping your standard or rechargeable batteries together and safe.
- Prompts: It is suitable for 21700 flat-head cylindrical lithium batteries, with a length of 70mm and a diameter of 21mm.
- important The battery must be installed from the positive pole, then the negative pole! To disassemble the battery, it must be disassembled from the negative pole, and it is forbidden to disassemble from the positive pole of the battery!
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 1.20 x 3.82 x 2.05 inches | Weight: 0.15 Pounds
Warranty: 1 year manufacturer
See On Amazon #13
Bistook 2Pcs 21700 Battery Storage Case 3 Slots x 3.7V for 3x21700 Batteries Holder Box Container with ON/Off Leads and Switch PC Plastic Material Nickel-Plated Shrapnel Transparent case
Asin: B0BZLJF77Z | Model: 21700-3S3P-01 | PartNumber: 21700-3S3P-01 | Ean: 0760627230975 | UPC: 760627230975
3.Transparent Cover & Convenient Switch:The Battery Case Has A Sliding Transparent Cover Design Allows You To Easily Open The Battery Holder, Saving Time And Effort. Equipped With An On/Off Switch And A 150Mm Wire, The Power Flow Can Be Easily Controlled, Allowing For Convenient Operation Of Battery-Powered Devices..
5.Warm Tips:This Product Issuitable For Diy And Does Not Include Batteries. It's Best To Use A 21700 Flat-Head Lithium Battery..
4.Easy To Carry:The 21700 Diy Transparent Battery Box Are Small In Size. Users Can Easily Put It In Their Pockets Or Backpacks For Easy Carrying. Whether It's Outdoor Activities, Camping Or Everyday Use, You Can Rely On This Battery Case To Provide Reliable Power Support..
2.Flexible Use:The 21700 Battery Holder Pack Contains Two 3-Slot Battery Boxes, One Supports Series And The Other Supports Parallel.
Features
- 1.PC Material:The transparent battery holder is made of PC plastic material allows you to quickly and accurately understand the battery s status,which is more secure.
- 2.Flexible use:The 21700 battery holder pack contains two 3-slot battery boxes, one supports series and the other supports parallel
- 3.Transparent cover & Convenient switch:The battery case has a sliding transparent cover design allows you to easily open the battery holder, saving time and effort. Equipped with an ON/Off switch and a 150mm wire, the power flow can be easily controlled, allowing for convenient operation of battery-powered devices.
- 4.Easy to carry:The 21700 DIY transparent battery box are small in size. Users can easily put it in their pockets or backpacks for easy carrying. Whether it's outdoor activities, camping or everyday use, you can rely on this battery case to provide reliable power support.
- 5.Warm Tips:This product issuitable for DIY and does not include batteries. It's best to use a 21700 flat-head lithium battery.
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 0.99 x 3.98 x 2.64 inches | Weight: 0.29 pounds
Warranty: 1 year manufacturer
See On Amazon #14
Bistook DIY Energy Storage Kit 21700 Battery Holder Case Box Bracket Slot PC+ABS Plastic Material,Support 2S3P 3S2P 1S6P Splicable No Soldering Support High Current 2pcs (2pcs 2 * 3 Slots)
Asin: B0BZL9WXQY | Model: 21700-2301 | PartNumber: 21700-2301 | Ean: 0760627230906 | UPC: 760627230906
No Soldering Required: This 21700 Battery Holder Case Kit Does Not Require Soldering And Can Be Assembled Quickly And Easily. This Makes It Safer To Use, As No Welding Tools Are Needed..
Warm Tips&Satisfaction Service：This Product Issuitable For Diy And Does Not Include Batteries. It's Best To Use 21700 Flat-Head Lithium Batteries.This Item Can Be Returned In Its Original Condition For A Full Refund Or Replacement Within 30 Days Of Receipt If There's Anything Wrong With The Product. Please Contact Us If You Have Any Questions, We Will Reply You Within 24 Hours And Provide You With A Satisfactory Solution..
Function: The 21700 Battery Case Slot Kit Can Carry Six 3.7V Batteries,And Its Positive And Negative Electrodes Are Made Of Pure Copper M3 Screws, Which Can Effectively Reduce Resistance.It Supports 10~20A Current And High Current Output, Greatly Improving The Working Efficiency Of The Battery And Making The Product Last Longer..
Multiple Splicing Methods:The Diy Energy Storage Shell Kit Supports 3S2p（11.1V）,2S3p（7.4V），1S6p（3.7V）.It Can Be Used With A Protection Board, Which Can Meet Different Power Requirements.
Features
- High-quality materials:The 21700 energy storage bracket kit is made of PC+ABS plastic, which are durable and have strong mechanical and stable electrical performance.
- Multiple splicing methods:The DIY energy storage shell kit supports 3S2P 11.1V ,2S3P 7.4V 1S6P 3.7V .It can be used with a protection board, which can meet different power requirements
- No soldering required: This 21700 battery holder case kit does not require soldering and can be assembled quickly and easily. This makes it safer to use, as no welding tools are needed.
- Function: The 21700 Battery Case Slot kit can carry six 3.7V batteries,and its positive and negative electrodes are made of pure copper M3 screws, which can effectively reduce resistance.It supports 10~20A current and high current output, greatly improving the working efficiency of the battery and making the product last longer.
- Warm Tips&Satisfaction service This product issuitable for DIY and does not include batteries. It's best to use 21700 flat-head lithium batteries.This item can be returned in its original condition for a full refund or replacement within 30 days of receipt if there's anything wrong with the product. Please contact us if you have any questions, we will reply you within 24 hours and provide you with a satisfactory solution.
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 4.13 x 2.95 x 2.13 inches | Weight: 0.61 Pounds
Warranty: 1 year manufacturer
See On Amazon #15
Bistook 4Pcs 1 Slots with PCB 21700 Battery Holder 1 Slots x 3.7V for 1x21700 Case Plastic Battery Storage Box with Pin Includes Insulating Posts and Ribbon 4 Pack (4 Pcs 1 Solts)
Asin: B0C13J46N5 | Model: Bis-21700-4 slots B1 | PartNumber: Bis-21700-4 slots B1 | Ean: 0760627231019 | UPC: 760627231019
Function: Keeping Your Standard Or Rechargeable Batteries Together And Safe..
Important：The Battery Must Be Installed From The Positive Pole, Then The Negative Pole! To Disassemble The Battery, It Must Be Disassembled From The Negative Pole, And It Is Forbidden To Disassemble From The Positive Pole Of The Battery!.
Prompts: It Is Suitable For 21700 Flat-Head Cylindrical Lithium Batteries, With A Length Of 70Mm And A Diameter Of 21Mm..
Feature: The Battery Holder Has Holding One 3.7V Battery. It Is Easy To Solder And Conduct Electricity!.
Features
- Advantage: The battery holders are made of PC+ABS high quality material. Small size, easy to carry. Easy and convenient to use.
- Feature: The battery holder has holding one 3.7V battery. It is easy to solder and conduct electricity!
- Function: Keeping your standard or rechargeable batteries together and safe.
- Prompts: It is suitable for 21700 flat-head cylindrical lithium batteries, with a length of 70mm and a diameter of 21mm.
- important The battery must be installed from the positive pole, then the negative pole! To disassemble the battery, it must be disassembled from the negative pole, and it is forbidden to disassemble from the positive pole of the battery!
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 1.20 x 3.82 x 1.26 inches | Weight: 0.19 Pounds
Warranty: 1 year manufacturer
See On Amazon #16
Bistook DIY Energy Storage Kit 21700 Battery Holder Case Box Bracket Slot PC+ABS Plastic Material,Support 1S8P 2S4P 4S2P 8S1P Splicable No Soldering Support High Current 2pcs (2pcs 2 * 4 Slots)
Asin: B0BZL7G2SW | Model: 21700-2401 | PartNumber: 21700-2401 | Ean: 0760627230944 | UPC: 760627230944
No Soldering Required: This 21700 Battery Holder Case Kit Does Not Require Soldering And Can Be Assembled Quickly And Easily. This Makes It Safer To Use, As No Welding Tools Are Needed..
Warm Tips&Satisfaction Service：This Product Issuitable For Diy And Does Not Include Batteries. It's Best To Use 21700 Flat-Head Battery.This Item Can Be Returned In Its Original Condition For A Full Refund Or Replacement Within 30 Days Of Receipt If There's Anything Wrong With The Product. Please Contact Us If You Have Any Questions, We Will Reply You Within 24 Hours And Provide You With A Satisfactory Solution..
Function: The 21700 Battery Case Slot Kit Can Carry Four 3.7V Batteries,And Its Positive And Negative Electrodes Are Made Of Pure Copper M3 Screws, Which Can Effectively Reduce Resistance.It Supports 10~20A Current And High Current Output, Greatly Improving The Working Efficiency Of The Battery And Making The Product Last Longer..
Multiple Splicing Methods:The Diy Energy Storage Kit Supports Multiple Battery Splicing Methods,Such As 8S1p(29.6V),4S2p(14.8V),2S4p(7.4V),1S8p(3.7V).It Can Be Used With A Protection Board, Which Can Meet Different Power Requirements.
Features
- High-quality materials:The 21700 Energy Storage Bracket Kit is made of PC+ABS plastic, which are durable and have strong mechanical and stable electrical performance.
- Multiple splicing methods:The DIY Energy Storage Kit supports multiple battery splicing methods,such as 8S1P(29.6V),4S2P(14.8V),2S4P(7.4V),1S8P(3.7V).It can be used with a protection board, which can meet different power requirements
- No soldering required: This 21700 battery holder case kit does not require soldering and can be assembled quickly and easily. This makes it safer to use, as no welding tools are needed.
- Function: The 21700 Battery Case Slot kit can carry four 3.7V batteries,and its positive and negative electrodes are made of pure copper M3 screws, which can effectively reduce resistance.It supports 10~20A current and high current output, greatly improving the working efficiency of the battery and making the product last longer.
- Warm Tips&Satisfaction service This product issuitable for DIY and does not include batteries. It's best to use 21700 flat-head battery.This item can be returned in its original condition for a full refund or replacement within 30 days of receipt if there's anything wrong with the product. Please contact us if you have any questions, we will reply you within 24 hours and provide you with a satisfactory solution.
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 4.13 x 3.78 x 2.13 inches | Weight: 0.81 Pounds
Warranty: 1 year manufacturer
See On Amazon #17
Bistook 21700 Battery Holder Box Case for PCB Projects, 2-Pack, 4-Slot Each
Asin: B0BYSYZ5HY | Model: Bis-21700-4 slots 02 | PartNumber: Bis-21700-4 slots 02 | Ean: 0760627179199 | UPC: 760627179199
Function: Keeping Your Standard Or Rechargeable Batteries Together And Safe..
Important：It Is Suitable For 21700 Flat-Head Cylindrical Lithium Batteries, With A Length Of 70Mm And A Diameter Of 21Mm. The Battery Must Be Installed From The Positive Pole, Then The Negative Pole! To Disassemble The Battery, It Must Be Disassembled From The Negative Pole, And It Is Forbidden To Disassemble From The Positive Pole Of The Battery! Otherwise There Is A Risk Of Short Circuit!.
Prompts: Batteries Not Included. You Had Better Use Consumer Type 21700 Cell With Button Cap To Get Good Electricity Conductivity Of Positive And Terminal Of Box..
Feature: The Battery Holder Has Four Compartments Or Chambers For Holding Four 3.7V Battery. It Is Easy To Solder And Conduct Electricity!.
Features
- Advantage: The battery holders are made of PC+ABS high quality material. Small size, easy to carry. Easy and convenient to use.
- Feature: The battery holder has four compartments or chambers for holding four 3.7V battery. It is easy to solder and conduct electricity!
- Function: Keeping your standard or rechargeable batteries together and safe.
- Prompts: Batteries Not Included. You had better use consumer type 21700 cell with button cap to get good electricity conductivity of positive and terminal of box.
- important It is suitable for 21700 flat-head cylindrical lithium batteries, with a length of 70mm and a diameter of 21mm. The battery must be installed from the positive pole, then the negative pole! To disassemble the battery, it must be disassembled from the negative pole, and it is forbidden to disassemble from the positive pole of the battery! Otherwise there is a risk of short circuit!
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 0.86 x 3.27 x 3.46 inches | Weight: 0.13 Pounds
Warranty: 1 year manufacturer
See On Amazon #18
Bistook 2Pcs 3 Slots with PCB 21700 Battery Holder 3 Slots x 3.7V for 3x21700 Case Plastic Battery Storage Box with Pin Includes Insulating Posts and Ribbon 2 Pack (2 Pcs 3 Solts)
Asin: B0C13N6Q8C | Model: Bis-21700-4 slots B3 | PartNumber: Bis-21700-4 slots B3 | Ean: 0760627231040 | UPC: 760627231040
Function: Keeping Your Standard Or Rechargeable Batteries Together And Safe..
Important：The Battery Must Be Installed From The Positive Pole, Then The Negative Pole! To Disassemble The Battery, It Must Be Disassembled From The Negative Pole, And It Is Forbidden To Disassemble From The Positive Pole Of The Battery!.
Prompts: It Is Suitable For 21700 Flat-Head Cylindrical Lithium Batteries, With A Length Of 70Mm And A Diameter Of 21Mm..
Feature: The Battery Holder Has Holding Three 3.7V Battery. It Is Easy To Solder And Conduct Electricity!.
Features
- Advantage: The battery holders are made of PC+ABS high quality material. Small size, easy to carry. Easy and convenient to use.
- Feature: The battery holder has holding three 3.7V battery. It is easy to solder and conduct electricity!
- Function: Keeping your standard or rechargeable batteries together and safe.
- Prompts: It is suitable for 21700 flat-head cylindrical lithium batteries, with a length of 70mm and a diameter of 21mm.
- important The battery must be installed from the positive pole, then the negative pole! To disassemble the battery, it must be disassembled from the negative pole, and it is forbidden to disassemble from the positive pole of the battery!
- See more on Amazon...
Brand: Bistook | Manufacturer: Bistook
Dimensions: 1.20 x 3.82 x 3.03 inches | Weight: 0.22 Pounds
Warranty: 1 year manufacturer
See On Amazon
Looking For Something Else?
Search