FIXDRY 3D Printer Filament Dryer with Fan, 110W PTC Dehydrator Dryer Box Heated, Closed-Loop Constant Heating, Temperature Humidity Control, 2 Spool Compatible with 1.75mm, 2.85mm, 3.00mm
Asin: B0CFXQD157 | Model: FIXDRY | PartNumber: FIXDRY
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Adjustable Temperature & Humidity Lcd Screen】You Can Adjustable Heating Temperature(Up To 70°C) And Heating Time(0-48 Hours) To Accommodate Needs Of Various 3D Filaments. Acturally, We Give A Specialized Advise For The Heating Time And Temperature For Different 3D Filament On The Picture. Please Follow The Adviced Temperature To Set The Mode, Otherwise It Will Be Melted..
【Security Tests】Our Products Have Passed Strict Experiments And All-Round Tests Before Leaving The Factory And There Are Corresponding Certificates Ce Fcc Pse Ukca Reach, Etc. Please Ensure That The Product Will Not Have Any Potential Safety Hazard During Use And Normal Placement.Please Feel Free To Use Our Products, And Believe In Our Customer Protection..
【Closed-Loop Constant Heating】Real-Time Monitoring Of The Temperature In The Box, Keeping The Temperature In The Box Constant By Using The Closed-Loop Intermittent Heating Mode, Which Is More Energy-Saving And Safe.
【110W Ptc Heater With Fan】In Order To Improve The Uneven Heating Of The 3D Filament And The Heating Power Is Too Low. We Innovatively Adopted To Use A 110W Built-In Ptc Heater And A Circulating Fan To Keep It Dry During 3D Printing. Ptc Heater Is Also Known As Durable, Energy-Saver, And Environmentally Friendly..
Features
- Why We Need The Filament Dryer When you use the wet 3D filament, it will caused to stringing, clogging, poor adhesion, and Layer Shift so you will get a poor 3D product. To solve this problem, we creat and produce the upgraded FIXDRY filament dryer. The dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing.
- 110W PTC Heater With Fan In order to improve the uneven heating of the 3D filament and the heating power is too low. We innovatively adopted to use a 110W built-in PTC heater and a circulating fan to keep it dry during 3D printing. PTC heater is also known as durable, energy-saver, and environmentally friendly.
- Adjustable Temperature & Humidity LCD Screen You can adjustable heating temperature(up to 70 C) and heating time(0-48 Hours) to accommodate needs of various 3D filaments. Acturally, we give a specialized advise for the heating time and temperature for different 3D filament on the picture. Please follow the adviced temperature to set the mode, otherwise it will be melted.
- Closed-Loop Constant Heating Real-time monitoring of the temperature in the box, keeping the temperature in the box constant by using the closed-loop intermittent heating mode, which is more energy-saving and safe
- Security Tests Our products have passed strict experiments and all-round tests before leaving the factory and there are corresponding certificates CE FCC PSE UKCA REACH, etc. Please ensure that the product will not have any potential safety hazard during use and normal placement.Please feel free to use our products, and believe in our customer protection.
- See more on Amazon...
Brand: FIXDRY | Manufacturer: FIXDRY
Weight: 3.97 pounds
See On Amazon Similar To FIXDRY 3D Printer Filament Dryer
#1
Comgrow 3D Printer Filament Dryer Box, Comgrow 3D Filament Storages, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm/2.85mm PLA PETG ABS Material, Filament Dehydrator, Spool Holder
Asin: B098D366R3 | Model: AK36WG-1200400J | PartNumber: AK36WG-1200400J
Filament Dryer And Remove Moisture - Comgrow 3D Printer Filament Dryer Box Is Designed To Keep Filament Dry And Remove Moisture From Kinds Of Filaments. Internal Heating During Printing Provides A Dry Storage Environment For 3D Printer Filaments And Keeps The Filament Dry. Avoid Entanglement, Clogging, Poor Adhesion, And Layer Migration Caused By The Dampness Of The Printing Wire. (Note: Only Used For The Drying Of 3D Printer Filament).
Great Sealed Filament Dry Box -The Outlet Structure Adopts A Silicone Cable Sheath And Teflon Tube, The Outlet Is Smooth And Can Be Covered With A Plug When Not In Use. The Upper Cover Has A Snap Button Structure, And The Sealing Performance Is Good..
How To Set The Filament - Place The Filament Into The Filament Outlet. Please Note That The Direction Is Placed Counterclockwise So That The Pulley At The Bottom Can Feed Better..
Real-Time Monitoring Of Temperature And Humidity - Adjustable Temperature Range 40°~ 50 °C, Setting Time From 6 Hours To 12 Hours. A 2-Inch Lcd Screen And Touch Buttons Make It Easy To Operate, It Is More Comprehensive And Clear Of The Information Display. Press The Power Button To Start, And Hold The Function Button(M) To Change The Dry Time And The Temperature Setting..
Setting Notes - Set The Temperature And Duration After Turning On The Filament Dehydrator. The Machine Will Work Only When The Work State Is Displayed On The Screen. If The Work Mode Is Not Displayed, The Motherboard Will Automatically Shut Down After 3 Minutes. If You Have Any Unsolvable Problems With The Comgrow Filament Dryer Box, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Features
- Large Storage Volume -Filament Dry Box Inner Size: 9.29*6.49*9.13 inch. Comgrow dryer box can store 2 rolls of 1kg spools, compatible with PLA PETG ABS SILK filament. Works perfectly with all standard filament diameters 1.75mm/2.85mm.
- Setting Notes - Set the temperature and duration after turning on the filament dehydrator. The machine will work only when the work state is displayed on the screen. If the work mode is not displayed, the motherboard will automatically shut down after 3 minutes. If you have any unsolvable problems with the COMGROW filament dryer box, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- Filament Dryer and Remove Moisture - Comgrow 3d printer filament dryer box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments and keeps the filament dry. Avoid entanglement, clogging, poor adhesion, and layer migration caused by the dampness of the printing wire. (Note: Only used for the drying of 3D printer Filament)
- Real-time Monitoring of Temperature and Humidity - Adjustable temperature range 40 ~ 50 C, setting time from 6 hours to 12 hours. A 2-inch LCD screen and touch buttons make it easy to operate, it is more comprehensive and clear of the information display. Press the power button to start, and hold the function button(M) to change the dry time and the temperature setting.
- Great Sealed Filament Dry Box -The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use. The upper cover has a snap button structure, and the sealing performance is good.
- How to set the filament - Place the filament into the filament outlet. Please note that the direction is placed counterclockwise so that the pulley at the bottom can feed better.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 9.00 x 9.20 x 6.40 inches | Weight: 3.31 pounds
See On Amazon #2
[Upgraded with Fan] 2024 SUNLU Official Filament Dryer Box S2 for 3D Printer Filament, Upgrade Filament Storage Dehydrator for PLA PETG ABS Nylon PA Filament 1.75 2.85 3.00mm
Asin: B0BM97WX1D | Model: S2 | PartNumber: S2 | Ean: 0783970261342 | UPC: 783970261342
✅【Easy To Use & Quality Guaranteed】 Allows You To Print While Drying. 2 Inch Large Lcd Screen Monitor,Able To Display Temperature&Time Clearly And Brightly. Decrease Noise When Printing (Less Than 10Db While Operating)..
✅【Drying & Printing At One Time】The Feed-Out Coil Also Allows The Filament To Continue To Dry In The Dryer As It's Being Fed To The Printer. This Means That The Filament Will Be Dry And Ready To Use When It Reaches The Printer..
✅【Wide Compatibility Range】Compatible With A Wide Range Of Filament Brands And Diameters. It Can Work With All Mainstream 3D Filament Brands And All Standard Filament Diameters Of 1.75Mm/2.85Mm/3.00Mm. This Means That It Can Be Used With A Variety Of Filaments, Including Pla, Pla+, Petg, Tpu, Abs, And Even High-End Filaments Like Pa And Pc. This Makes It A Versatile And Convenient Option For Users Who Want To Dry Their Filament..
✅【Touch Screen & Easy Operation】3D Filament Dry Box S2 Has A New Touch Screen That Is Designed To Provide A Tablet-Like Operation Experience For The User. The Screen Is 3.42*2.87 Inches In Size, Which Makes It Easy To Navigate And Use. The Touch Screen Also Allows User To Easily Switch Between ℃ And ℉ And Offers One-Key Recommended Temperature Settings For Different Types Of Filament. This Makes It Easy For The User To Set The Appropriate Drying Temperature For Their Filament..
Features
- Keep Filaments Strong & Flexible By Using SUNLU Filament Dryer Box S2 to removing moisture from the filament before it's used in the 3D printer, S2 filament dryer helps to ensure that the filament will be dryed. which will result in better print quality and fewer failed prints. This is important in save time, money, and frustration by improving the reliability and consistency of their 3D printing process.
- Touch Screen & Easy Operation 3D filament dry box S2 has a new touch screen that is designed to provide a tablet-like operation experience for the user. The screen is 3.42*2.87 inches in size, which makes it easy to navigate and use. The touch screen also allows user to easily switch between and and offers one-key recommended temperature settings for different types of filament. This makes it easy for the user to set the appropriate drying temperature for their filament.
- Easy to Use & Quality Guaranteed Allows you to print while drying. 2 inch large LCD screen monitor,Able to display temperature&time clearly and brightly. Decrease Noise when Printing (less than 10db while operating).
- Wide Compatibility Range compatible with a wide range of filament brands and diameters. It can work with all mainstream 3D filament brands and all standard filament diameters of 1.75mm/2.85mm/3.00mm. This means that it can be used with a variety of filaments, including PLA, PLA+, PETG, TPU, ABS, and even high-end filaments like PA and PC. This makes it a versatile and convenient option for users who want to dry their filament.
- Drying & Printing at One Time The feed-out coil also allows the filament to continue to dry in the dryer as it's being fed to the printer. This means that the filament will be dry and ready to use when it reaches the printer.
- See more on Amazon...
Brand: UNIDO | Manufacturer: SUNLU INC.,
Warranty: 2 year manufature
See On Amazon #3
SUNLU Official Filament Dryer S4, 4 Spools Capacity, 350W PTC Heater, Power Saving Storage Mode, 70 Max Temperature, 3 Circulation Fans, Nylon TPU PLA PETG ABS 3D Printer Filament Dryer Box, Black
Asin: B0CQJMV71Z | Model: SUNLU Filament Dryer S4 | PartNumber: SUNLU Filament Dryer S4
8 Filament Exit Holes: Sunlu Filament Dryer S4 Features Eight Filament Outlets, Ideal For Multiple Printers And Various Filament Loading Angles, Smoother Loading And Printing..
Sunlu Main Products: Sunlu Provides A Diverse Selection Of Premium 3D Printing Solutions, Including 3D Printer Filament, Filament Dryers, Fdm 3D Printers, 3D Printer Resin, Lcd 3D Printers, Resin Curing Boxes, 3D Pens, Filament Refills And Various Accessories, Ensuring All You Need For A Rewarding 3D Printing Experience..
High Compatibility: Sunlu Filament Dryer S4 Supports A Wide Range Of Materials Including Pla, Pla Plus, Pla Meta, Petg, Abs, Tpu, Pa, Pc, Nylon, Etc., Compatible With 1.75Mm, 2.85Mm, And 3.00Mm..
Diy More Possibilities: Sunlu Filament Dryer S4 Can Be Modified To Dry 3Kg Large Rolls Of Filament Or Function As A Shoe Dryer. We've Created A Video To Demonstrate The Process. Feel Free To Check Out More Details!.
3 Circulation Fans: Three High-Quality Fans Circulate Air Inside, Ensuring Consistent Temperature Across The Entire Area For More Even Drying, 360° Surround Heating..
Temperature Adjustment And Timer: Temperature Setting Range Is 35-70°C, Timer Setting Range Is 0-99 Hours. Users Can Adjust Parameters To Suit Filament Conditions..
350W Ptc Heater: Sunlu Filament Dryer S4 Is Equipped With A 350W Ptc Heater, Offering Safety And Higher Heating Efficiency (50% Higher Than The Filadryer S2)..
Sunlu S4 Packing List: Filadryer S4 *1, Power Cable *1, 8Cm Ptfe Tube *4, 100Cm Ptfe Tube *2, User Guide *1, Pieces Of Clips, Pieces Of Silicone Plugs..
Filament Dryer S4 Size: Sunlu Filament Dryer S4 Is Notably Large In Size. External Size-460(L)*220(W)*310(H)Mm, Internal Size-450(L)*175(W)*207(H)Mm, Net Weight-4Kg..
Features
- 4 Spool Capacity: SUNLU filament dryer S4 can dry up to four 1kg 3D printer filaments, enhancing drying efficiency and printing quality when drying while printing.
- Filament Dryer S4 Size: SUNLU filament dryer S4 is notably large in size. External size-460(L)*220(W)*310(H)mm, internal size-450(L)*175(W)*207(H)mm, net weight-4KG.
- 8 Filament Exit Holes: SUNLU filament dryer S4 features eight filament outlets, ideal for multiple printers and various filament loading angles, smoother loading and printing.
- 350W PTC Heater: SUNLU filament dryer S4 is equipped with a 350W PTC heater, offering safety and higher heating efficiency (50% higher than the FilaDryer S2).
- 3 Circulation Fans: Three high-quality fans circulate air inside, ensuring consistent temperature across the entire area for more even drying, 360 surround heating.
- Temperature Adjustment and Timer: Temperature setting range is 35-70 C, timer setting range is 0-99 hours. Users can adjust parameters to suit filament conditions.
- High Compatibility: SUNLU filament dryer S4 supports a wide range of materials including PLA, PLA Plus, PLA Meta, PETG, ABS, TPU, PA, PC, Nylon, etc., compatible with 1.75mm, 2.85mm, and 3.00mm.
- DIY More Possibilities: SUNLU filament dryer S4 can be modified to dry 3kg large rolls of filament or function as a shoe dryer. We've created a video to demonstrate the process. Feel free to check out more details!
- SUNLU S4 Packing List: FilaDryer S4 *1, Power Cable *1, 8cm PTFE Tube *4, 100cm PTFE Tube *2, User Guide *1, Pieces of Clips, Pieces of Silicone Plugs.
- SUNLU Main Products: SUNLU provides a diverse selection of premium 3D printing solutions, including 3D printer filament, filament dryers, FDM 3D printers, 3D printer resin, LCD 3D printers, resin curing boxes, 3D pens, filament refills and various accessories, ensuring all you need for a rewarding 3D printing experience.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Dimensions: 12.21 x 18.11 x 8.66 inches | Weight: 8.82 Pounds
See On Amazon #4
SUNLU Filament Dryer Box for 3D Printer Filament, S1 Plus Filament Dehydrator with Fan Design, Filament Storage can Keep 1.75 2.85 3.00mm PLA PETG ABS Filament Dry During 3D Printing (Black)
Asin: B09HJL95RH | Model: SUNLU Filament Dryer Box S1 Plus | PartNumber: SUNLU Filament Dryer Box S1 Plus
[Personalized Settings] You Can Adjust The Temperature And Time Of 3D Filament Dryer According To Different Filament And Environment.Adjustable Temperature Range Is 35℃-55℃.After Using The Drying Box, The Print Quality Is Better,Surface Smoother,Good Layer Adhesion..
[Customer Service] After-Sales Service And Technical Support Are Provided.If You Have Any Question About Sunlu 3D Printer Filament Dryer S1 Plus, Please Don't Hesitate To Contact Us.You Can Add The Dryer Box To Shopping Cart First To Help Quick Finding..
[High Compatibility] Maximum Capacity Of Filament Box Is 210*89(H)Mm. Ideal For All 3D Printing Filament 1.75Mm/2.85Mm/3.00Mm Pla Petg Abs Tpu Nylon Pa Filament Material. Compatible With All Major 3D Printer Filament Brands..
[Visual Display] Sunlu Dry Box Can Accurately Detect And Display The Temperature,Time,Humidity In The 2 Inch Lcd Screen.Hold The Left Button To Change The Dry Time, Press The Right Button To Change The Temperature Setting..
Features
- [FAST DRYING WITH FAN] SUNLU 3D printer filament dry box can help you solve the problem of stringing, clogging and poor adhesion caused by wet filament.Upgraded filament dryer adds a fan design,speeding up the discharge of excess water from 3D printer filaments and reducing the impact of wet weather on 3D filament printing.
- [VISUAL DISPLAY] SUNLU dry box can accurately detect and display the temperature,time,humidity in the 2 inch LCD screen.Hold the left button to change the dry time, press the right button to change the temperature setting.
- [PERSONALIZED SETTINGS] You can adjust the temperature and time of 3d filament dryer according to different filament and environment.Adjustable temperature range is 35 -55 .After using the drying box, the print quality is better,surface smoother,good layer adhesion.
- [HIGH COMPATIBILITY] Maximum capacity of filament box is 210*89(H)mm. Ideal for all 3d printing filament 1.75mm/2.85mm/3.00mm PLA PETG ABS TPU Nylon PA filament material. Compatible with all major 3D printer filament brands.
- [CUSTOMER SERVICE] After-Sales Service and Technical Support are provided.If you have any question about SUNLU 3D printer filament dryer S1 Plus, please don't hesitate to contact us.You can add the dryer box to shopping cart first to help quick finding.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Dimensions: 10.67 x 9.33 x 3.94 Inches | Weight: 2.65 Pounds
Warranty: 1 Year
See On Amazon #5
Sovol Filament Dryer 2023, SH01 Filament Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm Filament & PLA PETG TPU ABS
Asin: B09686Z5R3 | Model: SV-SH01-1 | PartNumber: SV-SH01-1
【Excellent Power-Off Drying Mode】Silicone & Ptfe Seal Makes It Possible To Store Filaments For A Long Time Without Power And Protects Your Filaments From Moisture And Dirt. You Can Put 4 Bags Of Desiccants (Not Included In The Package) Inside The Dryer Box To Improve Drying Efficience & Quality..
【Heating More Evenly】 The Unique Design Of The Built-In Fan In The Box Is Based On The Principle Of Modynamics Of Air, Makes The Filament Heated More Evenly. Sh01 Makes Drying More Efficient. Any Questions About The Product Please Feel Free To Contact Us. Our Technical Support Team Will Provide Service As Soon As We Can..
【Large Capacity】 Sovol Dryer Box Can Store 2 Filament Rolls With A Width Of Less Than 70 Mm Or 1 Filament Roll With A Width Of Less Than 150 Mm. Please Open The Ptfe Seals On The Top Of The Box During Heating For Moisture Evaporation..
【Real-Time Monitoring Of Temp And Humidity Inside】Displays The Humidity And Temperature In The Dry Box In Real Time. Setting Temperature 40 °, 45 °, 50 ° C And Setting Time From 6 Hours To 12 Hours. If You Use Sh01 In A Room With Room Temperature Under 16℃, The Temperature In The Dryer Box Would Not Come Up To 50℃. But Do Not Worry, This Would Not Decrease Drying Effect..
Features
- Remove Excess Moisture 3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament.
- Real-time Monitoring of Temp and Humidity inside Displays the humidity and temperature in the dry box in real time. Setting temperature 40 , 45 , 50 C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16 , the temperature in the dryer box would not come up to 50 . But do not worry, this would not decrease drying effect.
- Excellent Power-off Drying Mode Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality.
- Large Capacity Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation.
- Heating More Evenly The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to contact us. Our technical support team will provide service as soon as we can.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Dimensions: 9.53 x 9.69 x 6.89 inches | Weight: 3.66 pounds
See On Amazon #6
ELEGOO Rapid PETG Filament 1.75mm Black 4KG, High Speed 30-600mm/s 3D Printer Filament Dimensional Accuracy +/- 0.02 mm, 1kg Cardboard Spool(2.2lbs) Fits for Most FDM 3D Printers
Asin: B0CJ32C5R5
【Good Toughness & Easy To Use】Petg Combines The Best Features Of Abs And Pla, It’S As Easy To Print As Pla, And Has Similar Strength Compared To Abs. Durable, Flexible, Highly Impact Resistant And Odorless, Ideal For Printing Daily Necessities.
【Fit For High Speed Printer】Fit For Both Regular Printers And High Speed Printers, Perfectly For Most 1.75Mm Printers Such As Neptune 4, Neptune 4 Pro/Plus/Max, K1 Series, Ender 3 V2, Kobra 2 Series, M5, M5c And More.
【Less-Tangle & Neatly Wound】Full Mechanical Winding And Strict Manual Inspection Ensures That All Rapid Petg Filaments Are Neatly Wound, Effectively Reduces Tangles And Snap Issues. Please Use It As Soon As Possible After Unpacking, Dry It Completely Before Using Again.
【Better Light Transmittance】Rapid Petg Has Good Light Transmittance, Less Warping And Low Shrinkage Compared To Pla. Any Parts That Involve Light Diffusion Is An Ideal Use Of Petg.
Features
- 30-600mm/s Printing Speed With enhanced fluidity, ELEGOO RAPID PETG filament melts rapidly and flows smoothly, allowing for up to 600mm/s fast printing speed. You can complete the projects quickly without compromising on quality
- Better Light Transmittance Rapid PETG has good light transmittance, less warping and low shrinkage compared to pla. Any parts that involve light diffusion is an ideal use of PETG
- Good Toughness & Easy to Use PETG combines the best features of ABS and PLA, it s as easy to print as pla, and has similar strength compared to ABS. Durable, flexible, highly impact resistant and odorless, ideal for printing daily necessities
- Less-tangle & Neatly Wound Full mechanical winding and strict manual inspection ensures that all rapid petg filaments are neatly wound, effectively reduces tangles and snap issues. Please use it as soon as possible after unpacking, dry it completely before using again
- Fit For High Speed Printer Fit for both regular printers and high speed printers, perfectly for most 1.75mm printers such as Neptune 4, Neptune 4 pro/plus/max, K1 series, Ender 3 V2, Kobra 2 series, M5, M5C and more
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #7
2024 SUNLU Official Filament Dryer Box S4,Four-Spool 3D Printer Dehydrator with Rapid Heating, Auto Humidity Control, and Advanced Triple Fan Upgrade,Compatible with PLA,PETG,ABS,TPU,PA
Asin: B0CRYDN5X9 | Model: SUNLUS4 | PartNumber: SUNLUS4
Auto Humidity Control - The Sunlu Filadryer S4 Incorporates A High-Precision Humidity Sensor, Displaying Real-Time Interior Humidity. Even When The Filament Dryer Is In Standby, It Will Automatically Activate When The Interior Humidity Reaches Or Exceeds 50%, Preventing Secondary Moisture Exposure. Thus, It Can Also Serve As Your Filament Storage Box..
Universal Compatibility - The Sunlu S4 Filament Dehydrator Is Compatible With Pla, Pla+, Petg, Tpu, Abs, Pa, Pc, Nylon, And Other High-End 3D Filaments. It Works Perfectly With All Standard Filament Diameters: 1.75Mm, 2.85Mm, 3.00Mm..
After Sale Service- We Provide A Lifetime Of Professional Technical Support. If You Encounter Any Issues While Using It, Please Contact Us (The Seller) Directly Through The 'Ask A Question' Feature..
Easy To Use - The Adjustable Temperature Range Is 35°C To 70°C, With A Setting Time From 0 To 99 Hours. This 3D Printer Filament Dryer Features A Large Touch Screen, Providing A Tablet-Like Operation Experience. It Also Comes With Pre-Configured Temperature And Drying Time Settings For Commonly Used Filaments Such As Pla, Abs, Petg, As Well As Pa And Pc. This Reduces Setup Complexities And Enhances Your User Experience..
Fast Heating & Drying Evenly - The Sunlu S4 Filament Dryer Is Equipped With A Ptc Heating Element And A Triple-Fan Configuration. The Interior Heat Is Efficiently Circulated With Three Fans, Making The Heating Process More Even. Additionally, The S4 Filament Dry Box Achieves Rapid Heating Up To 70 °C In Record Time. The Robust 350W Ptc Heater Is 6.9 Times More Powerful Than The Sunlu S2, Ensuring An Accelerated And Efficient Filament Drying Experience..
Features
- Four-Spool Filament Dryer Box - SUNLU S4 is the first filament dryer box capable of accommodating four 1kg spools simultaneously. It is equipped with eight filament holes and PTFE tubes, meeting the demands for drying multiple filaments and enabling concurrent printing with multiple printers.
- Fast Heating & Drying Evenly - The SUNLU S4 filament dryer is equipped with a PTC heating element and a triple-fan configuration. The interior heat is efficiently circulated with three fans, making the heating process more even. Additionally, the S4 filament dry box achieves rapid heating up to 70 C in record time. The robust 350W PTC heater is 6.9 times more powerful than the SUNLU S2, ensuring an accelerated and efficient filament drying experience.
- Auto Humidity Control - The SUNLU FilaDryer S4 incorporates a high-precision humidity sensor, displaying real-time interior humidity. Even when the filament dryer is in standby, it will automatically activate when the interior humidity reaches or exceeds 50%, preventing secondary moisture exposure. Thus, it can also serve as your filament storage box.
- Easy to Use - The adjustable temperature range is 35 C to 70 C, with a setting time from 0 to 99 hours. This 3D printer filament dryer features a large touch screen, providing a tablet-like operation experience. It also comes with pre-configured temperature and drying time settings for commonly used filaments such as PLA, ABS, PETG, as well as PA and PC. This reduces setup complexities and enhances your user experience.
- Universal Compatibility - The SUNLU S4 filament dehydrator is compatible with PLA, PLA+, PETG, TPU, ABS, PA, PC, Nylon, and other high-end 3D filaments. It works perfectly with all standard filament diameters: 1.75mm, 2.85mm, 3.00mm.
- After Sale Service- We provide a lifetime of professional technical support. If you encounter any issues while using it, please contact us (the seller) directly through the 'Ask a Question' feature.
- See more on Amazon...
Brand: YOOPAI | Manufacturer: YOOPAI3D
Weight: 2.20 Pounds
See On Amazon #8
OVERTURE Nylon Filament 1.75mm 3D Printer Filament, Polyamide (PA) 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.02 mm, Fit Most FDM Printer (Black)
Asin: B087R3M9Z2 | Model: OVA175 | PartNumber: OVA175 | Ean: 0810031292233 | UPC: 810031292233
【More Humanized Design & Easy To Use】 Grid Layout On The Surface For Easy Resizing; With Length/ Weight Gauge And Viewing Hole On The Reel So That You Can Easily Figure Out The Remaining Filaments; More Filaments Clip Holes For Fixing Purpose On The Reel; Larger Spool Inner Diameter Design Makes Feeding Smoother.
【Risk-Free & Lifetime Guarantee】 Discover Worry-Free 3D Printing With Overture Filament—Backed By Our Lifetime Satisfaction Guarantee. No Matter The Challenges, We're Here To Support You For A Seamless 3D Printing Experience. Trust Overture As Your Dependable Supplier Of 3D Printing Filaments And Accessories.
【Dimensional Accuracy & Consistency】 Advanced Ccd Diameter Measuring And Self-Adaptive Control System In The Manufacturing Guarantee These Nylon Filaments Of 1.75 Mm Diameter, Accuracy +/- 0.02 Mm; 1 Kg Spool (2.2Lbs).
【High Stability And Durability】 Overture Filament Is Based On A Copolymer Of Nylon 6 And Nylon 6.6, A Strong And Tough Thermoplastic Polymer. Great For Creating Parts Which Needs To Be Strong And Durable. These Nylon Filaments Are Excellent Choice For Engineering Production Or Prototyping. Pva Glue Is Always Required For Better Adhesion.
Features
- Odorless & Zero Warping This CoPA filament combines excellent strength, toughness, and heat resistance up to 180 C. It delivers excellent printing quality with no Odor or warpage during printing. As the Nylon material is sensitive to moisture, please remember to put it back into a transparent bag
- High Stability and Durability OVERTURE filament is based on a copolymer of Nylon 6 and Nylon 6.6, a strong and tough thermoplastic polymer. Great for creating parts which needs to be strong and durable. These Nylon filaments are excellent choice for engineering production or prototyping. PVA glue is always required for better adhesion
- More Humanized Design & Easy to Use Grid layout on the surface for easy resizing; with length/ weight gauge and viewing hole on the reel so that you can easily figure out the remaining filaments; more filaments clip holes for fixing purpose on the reel; Larger spool inner diameter design makes feeding smoother
- Dimensional Accuracy & Consistency Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these Nylon filaments of 1.75 mm diameter, Accuracy +/- 0.02 mm; 1 kg spool (2.2lbs)
- Risk-Free & Lifetime Guarantee Discover worry-free 3D printing with Overture filament backed by our lifetime satisfaction guarantee. No matter the challenges, we're here to support you for a seamless 3D printing experience. Trust Overture as your dependable supplier of 3D printing filaments and accessories
- See more on Amazon...
Brand: OVERTURE | Manufacturer: OVERTURE
Weight: 2.20 pounds
See On Amazon #9
ELEGOO PLA Plus Filament 1.75mm Black 4KG, PLA+ Tougher and Stronger 3D Printer Filament Pro Dimensional Accuracy +/- 0.02mm, 4 Pack 1kg Spool(2.2lbs) Fits for Most FDM 3D Printers
Asin: B0C7GDB9GQ
【Top-Notch Accuracy & Consistent】Precise Production Process Guarantee Elegoo Pla Pro Filament Of 1.75Mm Diameter, Accuracy Of +/- 0.02Mm. Strict Tolerances And Perfect Dimensional Accuracy Ensure Smooth And Consistent Feeding For Filaments.
【No Clogging & No Bubbles】Complete Dried Before Packing And Well Vacuum Sealed Protect The Filaments From Moisture And Dust,No Clogging And Bubbling. Perfectly Compatible With Most 1.75Mm Fdm 3D Printers On The Market.
【Glossy Surface & Easy To Use】Accurate Deposition And Strong Layer Bonding Bring A Smoother Surface Finish Without Layer Delamination Issues. The Lower Printing Temperature Make It Very Easy To Print With Excellent Print Quality.
【Less-Tangle & Neatly Wound】Full Mechanical Winding And Strict Manual Inspection Ensures That All Pla+ Filaments Are Neatly Wound, Which Effectively Reduces Tangles, Snap And Line Breakage Issues.
Features
- Higher Toughness & Impact Strength Toughness and impact strength of ELEGOO PLA Plus is apparently enhanced. It s also low warpage and shrinkage, bringing excellent results for printing functional parts or other projects
- Less-tangle & Neatly Wound Full mechanical winding and strict manual inspection ensures that all pla+ filaments are neatly wound, which effectively reduces tangles, snap and line breakage issues
- Top-Notch Accuracy & Consistent Precise production process guarantee ELEGOO PLA Pro filament of 1.75mm diameter, accuracy of +/- 0.02mm. Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding for filaments
- Glossy Surface & Easy to Use Accurate deposition and strong layer bonding bring a smoother surface finish without layer delamination issues. The lower printing temperature make it very easy to print with excellent print quality
- No Clogging & No Bubbles Complete dried before packing and well vacuum sealed protect the filaments from moisture and dust,no clogging and bubbling. Perfectly compatible with most 1.75mm FDM 3D printers on the market
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #10
Creality Space PI Filament Dryer, 3D Printer Filament Dryer Box with 360 Heating, Upgraded Filament Dehydrator Storage Box Support Nylon ABS PETG PLA TPU 1.75/2.85mm Material
Asin: B0CQJVF7CR
Wide Compatibility: The Filament Dryer Is Compatible With A Variety Of Filament Materials, Such As Pla, Abs, Petg, Tpu, Etc., Meeting The Needs Of Different 3D Printing Projects..
Easy To Use: The Filament Dryer Is Simple To Operate, With A Clear And Intuitive Control Panel. You Can Easily Adjust The Temperature According To Your Needs..
Quiet Operation: The Filament Dryer Is Designed With A Silent Motor, Which Can Operate Quietly Without Disturbing Your Work Or Sleep..
Upgraded Built-In Fan: The Upgraded Built-In Fan Has A Higher Power And A Larger Air Volume, Which Can Quickly Blow Away The Moisture On The Surface Of The Filament, Keeping The Filament Dry For A Long Time..
Features
- 360 Surround Heating: The 3D printer filament dryer adopts a 360 surround heating design, which can quickly and evenly distribute heat to the filament, ensuring that the filament is evenly heated from all directions, preventing the formation of bubbles and improving the printing quality.
- Upgraded Built-in Fan: The upgraded built-in fan has a higher power and a larger air volume, which can quickly blow away the moisture on the surface of the filament, keeping the filament dry for a long time.
- Wide Compatibility: The filament dryer is compatible with a variety of filament materials, such as PLA, ABS, PETG, TPU, etc., meeting the needs of different 3D printing projects.
- Quiet Operation: The filament dryer is designed with a silent motor, which can operate quietly without disturbing your work or sleep.
- Easy to Use: The filament dryer is simple to operate, with a clear and intuitive control panel. You can easily adjust the temperature according to your needs.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Weight: 3.31 pounds
Warranty: 3 Months
See On Amazon #11
Creality Official Filament Dryer Box with Fan for 3D Printer Filament, Upgraded Filament Dehydrator Storage Box, 360 Hot-air Circulates Heating Compatible with 1.75/2.85mm PLA PETG ABS TPU Material
Asin: B0CGQTTF75 | Model: CR-DB002 | PartNumber: CR-DB002
【Freely Set Heating Time】- The Heating Time Can Be Set Freely From 0 To 24 Hours To Dry The Filaments Fully. After The Filament Drying Box Starts Working, It Can Be Monitored In Real-Time Through The Display Screen. Real-Time Humidity And Drying Countdown On The Display Allow You To Track The Drying Conditions..
【Easy To Use】- Creality 3D Printer Filament Dry Box Can Be Used Right Out Of The Box. The Design Of Two Rollers In The Box Allows You To Print While Drying. The Thermal Insulation Cotton On Both Sides Of The Filament Dryer Box Can Prevent You From Being Burned When Printing..
【Wide Compatibility】- 3D Printer Filament Dryer Box Size: 266*237*99Mm. This Drying Box Is Suitable For Most Different Filament Types And Diameters On The Market, Such As Pla, Petg, Abs, Tpu, Asa, Pp, Pc, Pa, And More. Works Perfectly With Filament Diameters Of 1.75Mm And 2.85Mm..
【Personalized Temperature Setting】- Different Drying Temperatures Can Be Set According To Different 3D Filaments. The Heating Temperature Range Is 45℃-65℃. The Drying Box Has A Built-In Fan That Circulates The Hot Air Through 360° Inside The Chamber. It Can Be Heated To 65℃ Within 15 Minutes..
Features
- Remove Moisture from Filament - Creality filament dryer box 2.0 can effectively remove moisture from filament while printing. After drying, it can effectively solve the problems of drawing, clogging, and poor adhesion of the filaments during printing and improve print quality.
- Personalized Temperature Setting - Different drying temperatures can be set according to different 3D filaments. The heating temperature range is 45 -65 . The drying box has a built-in fan that circulates the hot air through 360 inside the chamber. It can be heated to 65 within 15 minutes.
- Freely Set Heating Time - The heating time can be set freely from 0 to 24 hours to dry the filaments fully. After the filament drying box starts working, it can be monitored in real-time through the display screen. Real-time humidity and drying countdown on the display allow you to track the drying conditions.
- Wide Compatibility - 3D printer filament dryer box size: 266*237*99mm. This drying box is suitable for most different filament types and diameters on the market, such as PLA, PETG, ABS, TPU, ASA, PP, PC, PA, and more. Works perfectly with filament diameters of 1.75mm and 2.85mm.
- Easy to Use - Creality 3D printer Filament dry box can be used right out of the box. The design of two rollers in the box allows you to print while drying. The thermal insulation cotton on both sides of the filament dryer box can prevent you from being burned when printing.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 10.47 x 9.33 x 3.90 inches | Weight: 2.34 pounds
See On Amazon #12
SUNLU Official Filament Dryer S1 Plus, Built-in Circulation Fan, Filament Dryer Box Storage Box for 3D Printer Filament 1.75 2.85 3.00, S1 Plus White
Asin: B08C9RZPMN | Model: SUNLU Filament Dryer S1 Plus | PartNumber: SUNLU Filament Dryer S1 Plus | Ean: 0782950697805 | UPC: 782950697805
【Personalized Drying Time Setting】 The Default Continuous Drying Time Of The Drying Box Is 6 Hours, And You Can Also Manually Set The Drying Time. The Time Setting Range Is 0~24 Hours. Commonly Used 3D Filament On The Market Under Normal Circumstances Only Need 3-6 Hours Of Drying To Achieve A Good Printing Experience And Printing Effect..
【User-Friendly Design&1 Year Guaranteed After-Sales Service】 A: The Design Of Two Rollers Inside The Box Allows You To Print While Drying; B: 2 Inch Large Screen Lcd Monitor, Can Display Temperature And Time Clearly And Brightly; C: Ultra Quiet Design, Less Than 10Db While Operating, No Disturbing Of Your Life And Work; D: Exquisite Packaging Design- Best Gift: Come On To Buy One To Present To Your Friends Who Love 3D Printing.
【Importance Of Filament Dryer】Any Material Of Filaments Will Absorb Moisture From The Air, Filament Being Old Or In High Humidity Place May Absorb A Lot. Damp Filament Will Cause Many Printing Issues, Filament Dryer Can Remove Moisture From The Damp Filament..
【Compatible With 99% Of 3D Filament Spools】A: Maximum Capacity Of Sunlu Dry Box Is Φ210*85(H)Mm. B: Compatible With All The Mainstream 3D Filament Brands Sunlu, Geeetech, Eryone, Esun, Amazon Basic Etc.; C: Works Perfectly With All Standard Filament Diameters 1.75Mm/2.85Mm/3.00Mm..
【Personalized Temperature Setting】The User Can Adjust The Temperature Of The Drying Box According To Different 3D Filament Type, Ambient Temperature, Humidity And Other Factors. Adjustable Temperature Range 35℃~55℃. Suitable For More Than 20 Kinds Of 3D Printing Filament Commonly Used In The Market.
Features
- Say Goodbye to Poor 3D Printing by Wet Filament Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.
- Personalized Temperature Setting The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35 ~55 . Suitable for more than 20 kinds of 3d printing filament commonly used in the market
- Personalized Drying Time Setting The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect.
- Compatible with 99% of 3D Filament Spools A: Maximum capacity of SUNLU dry box is 210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc.; C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm.
- User-friendly Design&1 Year Guaranteed After-Sales Service A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing
- Importance of Filament Dryer Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Weight: 2.69 pounds
See On Amazon #13
eSUN ABS+ Filament 1.75mm, 3D Printer Filament ABS Plus, Dimensional Accuracy +/- 0.05mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Black
Asin: B07FQ5MC78 | Model: ABS+175B1KG | PartNumber: ABS+175B1KG
【Tangle Free & No Plugging】Total Length: 410-425M. Full 1Kg 3D Printer Filament Reel, Perfect Roundness And Very Tight Diameter Tolerance, Good Winding, Does Not Overlap Or Tangle. Melt Well, Feed Smoothly And Constantly Without Clogging The Nozzle Or Extruder..
【Vacuumed Sealed Packaging】Filament Net Weight: 1Kg. Esun Filament Comes In A Sealed Vacuum Bag With A Desiccant Bag, Easily Keep Your 3D Printer Filaments At An Optimal Storage Condition And Free From Dust Or Dirt Before Opening The Vacuumed Sealed Packaging..
【Compatibility Printers 】Compatible With Most Of Fdm 3D Printers, Such As:Bambu Lab P1p /X1, Voron 2.4, Raise3d, Prusa, Creality Ender 3 And Ender 7..
【High Compatibility】Strong And Durable Abs+ Filament Is Engineering Thermoplastic. Suitable For Printing Parts With Higher Requirements For Resistance To Heat, Such As Industrial Machinery Parts, Model Machinery, Electronic Appliances And Instrumentation..
【Stable Dimensional Tolerance】Minimum Tolerance And Low Warping To Ensure Consistent Feeding And Stable Prints, Good Layer Bonding, Less Stringing, No Bubbles, No Cracking, Easy Handling, Resulting In An Outstanding Surface Finish And Are Highly Precise..
Features
- ABS+ Filament ABS+ is an enhanced version of Ordinary ABS, cracking and warping has been significantly improved when printing large-size items. It has high strength, better toughness, excellent impact strength, wear resistance and heat resistance.
- Stable Dimensional Tolerance Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, easy handling, resulting in an outstanding surface finish and are highly precise.
- Tangle Free & No Plugging Total Length: 410-425m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.
- High Compatibility Strong and durable ABS+ filament is engineering thermoplastic. Suitable for printing parts with higher requirements for resistance to heat, such as industrial machinery parts, model machinery, electronic appliances and instrumentation.
- Vacuumed Sealed Packaging Filament Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- Compatibility Printers Compatible with Most of FDM 3D Printers, such as:Bambu Lab P1P /X1, Voron 2.4, Raise3D, Prusa, Creality Ender 3 and Ender 7.
- See more on Amazon...
Brand: eSUN | Manufacturer: eSUN
Weight: 2.20 pounds
See On Amazon #14
Creality Filament Dryer Box Pro for 3D Printer Filament, Upgraded Filament Dry Box 2.0 1KG 3D Filament Storages Keep Filaments Dry During 3D Printing Filament Dehydrator for PLA PETG ABS TPU Nylon
Asin: B0CJ2YVVFM
✨【Easy To Use】Creality Filament Storage Box Requires No Assembly And Can Be Used Right Out Of The Dry Box. Display Screen And Knob Make It Easy To Operate. Real-Time Humidity Monitoring And Drying Hours Are Displayed Via A Countdown Timer, Allowing You To Track Drying Conditions. After Drying, It Is Best To Store The Filament In A Vacuum Bag To Keep It Dry And Ready For Use..
🎀【Wide Compatibility】Creality Filament Dryer Compatible With Most 1Kg Spool 3D Printer Filament. It Can Perfectly Fit Filament Diameters Of 1.75Mm/2.85Mm. And Can Be Used With A Variety Of Filaments, Such As Pla, Pla+, Petg, Tpu, Abs, Asa, Pp, Pc,Pa(Nylon). Pairing With Teflon Tubes Can Make The Filament Feeding Smoother..
🎁【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
🍀【Personalized Drying Time/Temperature Setting】You Can Set Different Drying Temperatures And Time To Dry The Filaments Fully According To Different 3D Filament Type, Ambient Temperature, Humidity And Other Factors. Adjustable Temperature Range 45℃~65℃, And The Time Setting Range Is 0~24 Hours..
📌【Improved Print Quality】3D Printing Filaments Are Hygroscopic, Moisture Can Cause Printing Failure. After Using Filament Dryer Box, It Can Effectively Solve The Problems Of Drawing, Clogging, And Poor Adhesion Of The Filaments During Printing And Improve Print Quality..
Features
- Upgraded Design Creality Filament Dry Box 2.0 heats up quickly and has a built-in fan that circulates the hot air through 360 inside the chamber, evenly heating the entire chamber. It can be heated to 65 C within 15 minutes. We have added thermal insulation cotton on the dryer box inner wall to keep warm and anti-scald when printing. Dryer box input voltage: 110V 50/60Hz.
- Improved Print Quality 3D printing filaments are hygroscopic, moisture can cause printing failure. After using filament dryer box, it can effectively solve the problems of drawing, clogging, and poor adhesion of the filaments during printing and improve print quality.
- Easy to Use Creality filament storage box requires no assembly and can be used right out of the dry box. Display screen and knob make it easy to operate. Real-time humidity monitoring and drying hours are displayed via a countdown timer, allowing you to track drying conditions. After drying, it is best to store the filament in a vacuum bag to keep it dry and ready for use.
- Personalized Drying Time/Temperature Setting You can set different drying temperatures and time to dry the filaments fully according to different 3D filament type, ambient temperature, humidity and other factors. Adjustable temperature range 45 ~65 , and the time setting range is 0~24 hours.
- Wide Compatibility Creality filament dryer compatible with most 1KG spool 3D Printer filament. It can perfectly fit filament diameters of 1.75mm/2.85mm. And can be used with a variety of filaments, such as PLA, PLA+, PETG, TPU, ABS, ASA, PP, PC,PA(nylon). Pairing with Teflon tubes can make the filament feeding smoother.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Weight: 2.20 pounds
Warranty: 6 months
See On Amazon #15
VIT SPORT 1.75mm Filament Connector | Easy Operate Filament Welder Filament Splicer for 3D Printer | Filament Fuser Filament Joiner for PLA/ABS/PC/PETG/TPU Filaments
Asin: B091Y9WSH6 | Model: 5267 | PartNumber: 5267 | Ean: 0734257461375 | UPC: 734257461375
3. Superior Filament Welding: Our Vit Sport 1.75Mm Filament Connector Ensures Reliable And Durable Filament Fusion. Rest Assured, Your Prints Will Have Seamless Transitions Without Compromising Strength Or Quality..
5. Vit Sport's Dedication To Your Success: Our Professional Team Is Dedicated To Providing Exceptional Customer Support. With A Full Year Of After-Sales Service, We're Here To Help You Achieve Your 3D Printing Goals..
4. Complete Filament Connectivity Kit: Our Value-Packed Set Includes The 1.75Mm Filament Splicer Tool, Guaranteeing Precision And Stability, Enabling Flawless Filament Joining In Every Print. No Need For Additional Purchases!.
2. Unparalleled Ease Of Use: With Our Innovative Filament Splicer Tool, Connecting And Welding Filaments Has Never Been Easier. Simply Follow Our Detailed Instructions And Enjoy Uninterrupted Printing..
Features
- 1. Upgrade Your 3D Printing Experience: Our VIT SPORT 1.75mm Filament Connector, also known as a filament welder or splicer, is designed to seamlessly join filaments. Say goodbye to filament waste during printing!
- 2. Unparalleled Ease of Use: With our innovative filament splicer tool, connecting and welding filaments has never been easier. Simply follow our detailed instructions and enjoy uninterrupted printing.
- 3. Superior Filament Welding: Our VIT SPORT 1.75mm Filament Connector ensures reliable and durable filament fusion. Rest assured, your prints will have seamless transitions without compromising strength or quality.
- 4. Complete Filament Connectivity Kit: Our value-packed set includes the 1.75mm filament splicer tool, guaranteeing precision and stability, enabling flawless filament joining in every print. No need for additional purchases!
- 5. VIT SPORT's Dedication to Your Success: Our professional team is dedicated to providing exceptional customer support. With a full year of after-sales service, we're here to help you achieve your 3D printing goals.
- See more on Amazon...
Brand: VIT SPORT | Manufacturer: VIT SPORT
Weight: 0.33 pounds
See On Amazon #16
OVERTURE ABS Filament 1.75mm, ABS 1kg Spool (2.2lbs),3D Printer Filament,Dimensional Accuracy +/- 0.03 mm, Fit Most FDM Printer (Black 1-Pack)
Asin: B087LW1YP3 | Model: OVA175 | PartNumber: OVA175 | Ean: 0810031292172 | UPC: 810031292172
[More Humanized Design & Easy To Use] -- Grid Layout On The Surface For Easy Resizing; With Length/ Weight Gauge And Viewing Hole On The Reel So That You Can Easily Figure Out The Remaining Filaments; More Filaments Clip Holes For Fixing Purpose On The Reel; Larger Spool Inner Diameter Design Makes Feeding Smoother.
[Cost-Effective And Wide Compatibility]-- With Over 8 Years’ 3D Filaments R & D Experience, Thousands Tons Of Filaments Output Every Month, Overture Is Capable Of Manufacturing All Kinds Of Filaments In Large Scale With Premium Quality, Which Contribute To Overture Filament Cost-Effective And Reliable For Most Common 3D Printers, Such As Mk3, Ender 3, Monoprice Flashforge And More.
[Dimensional Accuracy & Consistency]-- Advanced Ccd Diameter Measuring And Self-Adaptive Control System In The Manufacturing Guarantee These Abs Filaments Of 1.75 Mm Diameter, Dimensional Accuracy +/- 0.05 Mm1 Kg Spool (2.2Lbs).
[High Stability And Durability]-- Overture Abs Roll Are Made By Commonly Used Abs, A Strong And Tough Thermoplastic Polymer—Great For Creating Parts Which Needs To Be Resistant To High Temperatures; Due To The High Stability And Various Post-Processing Options (Sanding, Painting, Gluing, Filling), Our Abs Filaments Are Excellent Choice For Engineering Production Or Prototyping.
Features
- [Less Odor, Less Warping & Bubble-Free]--This ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor and low warpage during printing. Complete drying for 24 hours before vacuum packaging. Enclosed chamber is required for better printing quality and durability when printing big parts with ABS filaments
- [High Stability and Durability]-- OVERTURE ABS Roll are made by commonly used ABS, a strong and tough thermoplastic polymer great for creating parts which needs to be resistant to high temperatures; Due to the high stability and various post-processing options (sanding, painting, gluing, filling), our ABS filaments are excellent choice for engineering production or prototyping
- [More Humanized Design & Easy to Use] -- Grid layout on the surface for easy resizing; with length/ weight gauge and viewing hole on the reel so that you can easily figure out the remaining filaments; more filaments clip holes for fixing purpose on the reel; Larger spool inner diameter design makes feeding smoother
- [Dimensional Accuracy & Consistency]-- advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these ABS filaments of 1.75 mm diameter, dimensional accuracy +/- 0.05 mm1 kg spool (2.2lbs)
- [Cost-effective and Wide Compatibility]-- With over 8 years 3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more
- See more on Amazon...
Brand: OVERTURE | Manufacturer: OVERTURE
Weight: 2.20 pounds
See On Amazon #17
ELEGOO Rapid PLA Plus Filament 1.75mm White 4KG, PLA+ 3D Printer Filament for 30-600 mm/s High Speed Printing, Dimensional Accuracy +/- 0.02 mm, 4 Pack 1kg Spool(2.2lbs)
Asin: B0C6XGNT33
【Less-Tangle & Neatly Wound】Full Mechanical Winding And Strict Manual Inspection Ensures That All High-Speed Pla Plus Filaments Are Neatly Wound, Which Effectively Reduces Tangles, Snap And Line Breakage Issues.
【For Most 3D Printers】Rapid Pla+ Filament Fit For Both Regular Printers And High Speed Printers, Perfectly For Most High Speed Printer Such As Neptune 4, Neptune 4 Pro, K1, K1 Max, Ender 5 Series, Kobra 2, M5, M5c And More.
【Top-Notch Accuracy & Consistent】Precise Production Process Guarantee The Filament Of 1.75Mm Diameter, Accuracy Of +/- 0.02Mm. Strict Tolerances And Perfect Dimensional Accuracy Ensure Smooth And Consistent Feeding For Filaments.
【Enhanced Strength & Toughness】Elegoo Rapid Pla Plus Filament Features High Flexural Modulus And Elongation At Break, Which Makes It Resistant To Brittleness And Cracking, Bringing Excellent Results For Printing Functional Parts.
Features
- 30-600mm/s Printing Speed With enhanced fluidity, ELEGOO RAPID PLA+ filament melts rapidly and flows smoothly, allowing for up to 600mm/s fast printing speed. You can complete the projects quickly without compromising on quality
- Enhanced Strength & Toughness ELEGOO RAPID PLA plus filament features high flexural modulus and elongation at break, which makes it resistant to brittleness and cracking, bringing excellent results for printing functional parts
- Less-tangle & Neatly Wound Full mechanical winding and strict manual inspection ensures that all high-speed pla plus filaments are neatly wound, which effectively reduces tangles, snap and line breakage issues
- Top-Notch Accuracy & Consistent Precise production process guarantee the filament of 1.75mm diameter, accuracy of +/- 0.02mm. Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding for filaments
- For Most 3D Printers Rapid PLA+ filament fit for both regular printers and high speed printers, perfectly for most high speed printer such as Neptune 4, Neptune 4 pro, K1, K1 Max, Ender 5 series, Kobra 2, M5, M5C and more
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #18
EIBOS Official 3D Printer Filament Dryer Easdry, 3D Printer Filament Dry Box with Fan, Adjustable Temperature, Humidity Control & Spool Holder, Compatible with 1.75mm 2.85mm 3.00mm Nylon, PLA, TPU
Asin: B0BKFMZQHB | Model: Easdry | PartNumber: Easdry
【Compatible With Multiple Spools】Works For Different Filament Types And Diameters, Compatible With 1.75Mm, 2.85Mm, 3.00Mm 3D Filament Such As Nylon, Pla, Pva, Pc, Petg, Pa, Wood, Abs, Silk, Etc. Exquisite Space Allows Usage Of Single Roll With Spool Size: 220X72mm, Inner Size: 50Mm, With Little Rubber Seals To Fit Around A Ptfe Tube, And Smooth Rotating Shaft Allows The Filament To Continuously Rotate In A Dry Hot Box To Remove Moisture.
【45W Ptc Heater & Built-In Fan】Different From Applying Ordinary Heater 48W Pi Heating Pad To Heat Up Space, Our Product Use 45W Ptc Heater Which Is More Durable, Energy-Saver, And Environmentally Friendly, Makes Filament Drying More Evenly. Also A Built-In Fan Is Designed To Circulate The Hot Air Inside The Filament Dryer Box To Make Drying System Better Remove The Moisture.
【Safety Priority & Customer Service】Eibos Easdry Filament Dryer Has Passed Fcc, With Ul Certified Lr44 Battery, Crafted From V0 Level Material For Superior Fire Resistance, Which Ensures Your Safety During Every Use, You Can Focus On Your Projects Without Any Safety Concerns, As Safety Is Our Priority. Besides, 1-Year After-Sales Guarantee Offered For Your Peace Of Mind.
【Hot-Air Circulation Heating System】Applying Hot Air Circulation Heating Which Makes The Temperesuture Inside Box More Even, Filament Dryer Box Aims At Drying The Wet Or Brittle 3D Printer Filament, Or Even Make It Better Than The Brand New Unit. No Plastic Strings And Clogging, No Need Worry About Your Old Left Out Spools, This Dryer Box Can Help Revive Them Easily.
【Infinite Adjustable Temperature & Humidity Monitor】Based On Infinite Adjustable Temperature Mode, You Can Adjust Specific Heating Temperature To Accommodate Needs Of Various Filaments By Simply Turning The Knob From 40-65℃, With Main Types Of Filaments Marked For Your Fast Use. Equipped With Individual Humidity Sensor, Measurement Range From 10%-99% (❤️🔥Note: A76/Lr44 Button Battery Has Already Included. The Dryer Is Designed To Reduce Humidity Levels To 10%, If The Humidity Indicator Does Not Display Accurately, Please Contact Customer Service Through The 'Ask A Question' Feature For Humidity Sensor Support❤️🔥), Real-Time Data Will Be Indicated By The Lcd Monitor..
Features
- DRYER & STORAGE BOX the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing. Filament can be used while in the box, the dryer function as both storage box and filament holder. Also 2 slots at the corners were designed for placing dessicant,keep your filament in longer drying condition.Sealed protection, comprehensive dust-proof and damp, no impurities. US Plug, input voltage 110V-120V
- INFINITE ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR based on infinite adjustable temperature mode, you can adjust specific heating temperature to accommodate needs of various filaments by simply turning the knob from 40-65 , with main types of filaments marked for your fast use. Equipped with individual humidity sensor, measurement range from 10%-99% ( NOTE: A76/LR44 button battery has ALREADY included. The dryer is designed to reduce humidity levels to 10%, if the humidity indicator does not display accurately, please contact customer service through the 'ask a question' feature for Humidity Sensor Support ), real-time data will be indicated by the LCD monitor.
- COMPATIBLE WITH MULTIPLE SPOOLS works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PVA, PC, PETG, PA, Wood, ABS, Silk, etc. Exquisite space allows usage of single roll with spool size: 220x72mm, Inner size: 50mm, with little rubber seals to fit around a PTFE tube, and smooth rotating shaft allows the filament to continuously rotate in a dry hot box to remove moisture
- HOT-AIR CIRCULATION HEATING SYSTEM applying hot air circulation heating which makes the temperesuture inside box more even, filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new unit. No plastic strings and clogging, no need worry about your old left out spools, this dryer box can help revive them easily
- 45W PTC HEATER & BUILT-IN FAN different from applying ordinary heater 48W PI heating pad to heat up space, our product use 45W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly. Also a Built-in fan is designed to circulate the hot air inside the filament dryer box to make drying system better remove the moisture
- SAFETY PRIORITY & CUSTOMER SERVICE eibos easdry filament dryer has passed FCC, with UL certified LR44 battery, crafted from V0 level material for superior fire resistance, which ensures your safety during every use, you can focus on your projects without any safety concerns, as safety is our priority. Besides, 1-Year After-Sales Guarantee offered for your peace of mind
- See more on Amazon...
Brand: EIBOS | Manufacturer: Shenzhen EIBOS Chuanggou Tech Co., Ltd
Dimensions: 4.06 x 8.86 x 8.86 inches
Warranty: 1 year manufacturer
See On Amazon #19
ANYCUBIC PLA Plus (PLA+) 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, 1KG Spool, Black
Asin: B0CF1R7H4Z
【No Clogging, No Bubbles】Without Any Clogging Or Bubbles, Anycubic Pla Plus Filament Guarantees A Seamless Extrusion Of Filament, Resulting In A Refined And Consistent Finish For The Completed Model..
【High Compatibility】Ensuring Compatibility With Most Of Fdm 3D Printers And 3D Printing Pens Available In The Market. Our Vacuum Packaging Effectively Shields Against Moisture And Dust, Ensuring An Enhanced Printing Experience..
【 Without Tangle Hassles】Anycubic 3D Printing Pla Plus Filament Is Without Tangle Hassles On The Roll And Easily Left The Spool Without Crossing Turns Which Can Result In Less Thread Pulling And Twisting, No Clogging. Besides, It Can Easily Lock The Filament After Use..
【High Dimensional Accuracy】The Winding Of Anycubic Pla Plus 3D Filament 1.75Mm Is Tidy And Maintains Dimensional Stability, With A Controlled Wire Diameter Tolerance Of ±0.02 Mm. Its High Precision And Minimal Shrinkage Work Together To Prevent Cracks And Warping..
Features
- High Toughness Anycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
- High Dimensional Accuracy The winding of Anycubic PLA Plus 3D Filament 1.75mm is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of 0.02 mm. Its high precision and minimal shrinkage work together to prevent cracks and warping.
- No Clogging, No bubbles Without any clogging or bubbles, Anycubic PLA Plus Filament guarantees a seamless extrusion of filament, resulting in a refined and consistent finish for the completed model.
- Without Tangle Hassles Anycubic 3D Printing PLA Plus Filament is without tangle hassles on the roll and easily left the spool without crossing turns which can result in less thread pulling and twisting, no clogging. Besides, it can easily lock the filament after use.
- High Compatibility Ensuring compatibility with most of FDM 3D printers and 3D printing pens available in the market. Our vacuum packaging effectively shields against moisture and dust, ensuring an enhanced printing experience.
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 2.87 x 4.22 x 4.22 inches | Weight: 2.20 pounds
See On Amazon #20
2024 CREALITY Official Space Pi Filament Dryer Plus, Dual-Spool Filament Dryer Box for 3D Printing with PTC Heater, 360 Fast Heating, 4'' LCD Touch Screen, One Key Set, Compatible with PLA PETG ABS
Asin: B0CRRJLQV9 | Model: CR Dryer Box-2 | PartNumber: CR Dryer Box-2 | Ean: 0850060423024 | UPC: 850060423024
One Key Set For Each Type Of Filaments: Space Pi Plus Has One-Key Temperature Settings For 12 Different Type Of 3D Printing Filaments, Including Pla, Tpu, Abs, Asa, Petg, Pc, Pa, Pet, Pla-Cf, Petg-Cf, Pa-Cf. We Have Set The Corresponding Drying Temperature For Each Type Of Filaments In Advance. You Do Not Need To Check Or Adjust It Yourself. The Drying Box Will Start Working Appropriately Immediately..
Parameter Power-Off Memory: No Need To Readjust Parameters Every Time You Start Up. After A Power Outage, The Filament Dryer Can Remember Your Previous Filament And Temperature Settings, Allowing For Quick Start Drying..
No Worries: We Provide One-Year Free Replacement Service. If The Product You Received Has Quality Problems Or Is Damaged During Use, Please Feel Free To Contact Us. We Will Replace It With A New Product For Free..
4’‘ Touch Screen For Easy Operation: The Creality Space Pi Plus Filament Dryer Box Comes With A 4’‘ Touch Screen Which Can Clearly And Brightly Display Temperature And Time, Making It Simple For You To Track Drying Conditions. With The Touch Screen, You Can Easily Adjust The Temperaturefrom 45℃ To 70℃, And Set The Drying Time From 0 To 48 Hours, Make Sure The Filament Is Completely Dry To Print The Results Better..
New Ptc Fast Heater, 360° Hot Air Circulation: Different From The General Pi Heaters On The Market, Our Unique Ptc Heater Can Heat Up Faster And Are More Energy-Efficient. The Dryer Quickly Heats With A Built-In Fan, Circulating Hot Air 360° For Uniform Heating, Effectively Drying Moisture Filaments And Improving Your 3D Printing Results..
Features
- Dual Spool Filament Dryer Box: Each Creality Space PI Plus is equipped with 4 filament holes and PTFE pipes, which can dry 2 rolls of 1KG filament at the same time, meeting the needs of users to dry a vide range of filaments and 2 3D printers at the same time, saving space and making the work area tidier.
- New PTC Fast Heater, 360 Hot Air Circulation: Different from the general PI heaters on the market, our unique PTC heater can heat up faster and are more energy-efficient. The dryer quickly heats with a built-in fan, circulating hot air 360 for uniform heating, effectively drying moisture filaments and improving your 3D printing results.
- One Key Set for Each Type of Filaments: Space Pi Plus has one-key temperature settings for 12 different type of 3D Printing filaments, including PLA, TPU, ABS, ASA, PETG, PC, PA, PET, PLA-CF, PETG-CF, PA-CF. We have set the corresponding drying temperature for each type of filaments in advance. You do not need to check or adjust it yourself. The drying box will start working appropriately immediately.
- 4 Touch Screen for Easy Operation: The Creality Space Pi Plus Filament Dryer Box comes with a 4 touch screen which can clearly and brightly display temperature and time, making it simple for you to track drying conditions. With the touch screen, you can easily adjust the temperaturefrom 45 to 70 , and set the drying time from 0 to 48 hours, make sure the filament is completely dry to print the results better.
- Parameter Power-off Memory: No need to readjust parameters every time you start up. After a power outage, the filament dryer can remember your previous filament and temperature settings, allowing for quick start drying.
- No worries: We provide one-year free replacement service. If the product you received has quality problems or is damaged during use, please feel free to contact us. We will replace it with a new product for free.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon
Looking For Something Else?
Search