Delay Board Relay Module 2 Working Modes Adjustable Time Delay Board Infinite Cycling Single Timing Modes Low Level Trigger Relay Relay Module (12V)
Asin: B0CFYR2TCR | Model: Hyuduo5gop6f9env-12 | PartNumber: Hyuduo5gop6f9env-12
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The External Contact Is Activated, And The Timing Is Started By Short Circuiting With The Self Reset Button. It Is Also Possible To Short Circuit The Triggers Together And Start Counting Down When Power Is Turned On. If It Is Triggered Again During Operation, It Will Be Disconnected Immediately..
During The Delay Period After The Relay Is Turned On, Triggered Again And The Delay Will Be Interrupted Immediately..
Do Not Operate After Power On, The Relay Is Turned On After Triggering, And Disconnected When The Time Is Reached..
Comes With 2 Working Modes, Infinite Cycling Mode And Single Timing Mode, Satisfying Your Varied Work Needs..
Features
- Using single chip microcomputer as the main control core, the relay module has high accuracy, very reliable.
- Comes with 2 working modes, infinite cycling mode and single timing mode, satisfying your varied work needs.
- The external contact is activated, and the timing is started by short circuiting with the self reset button. It is also possible to short circuit the triggers together and start counting down when power is turned on. If it is triggered again during operation, it will be disconnected immediately.
- Do not operate after power on, the relay is turned on after triggering, and disconnected when the time is reached.
- During the delay period after the relay is turned on, triggered again and the delay will be interrupted immediately.
- See more on Amazon...
Brand: Hyuduo | Manufacturer: Hyuduo
See On Amazon Similar To Delay Board Relay Module 2
#1
Axicom D3002 / 1462033-5 Relay DPDT 12VDC
Asin: B00PHLF2GE | Model: D3002 / 1462033-5 | PartNumber: D3002 / 1462033-5 | Ean: 0627434100313 | UPC: 627434100313
12Vdc.
2A.
Dpdt.
Brand: Axicom | Manufacturer: TE Connectivity
See On Amazon #2
UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Tachograph, GPS, PLC Control, Industrial Control, Electronic Experiment, Arduino Robot
Asin: B07BT25J52 | Model: U6031 | PartNumber: U6031
Self Protection: Built With Protection Against Reversal Diode, Supports Anti-Reverse Protection. Note: Please Remove The Jumper Cap Of S5 When Controlling Ac Current Or Dc Current Voltages Other Than 12V, Otherwise The Module Will Be Burned Or Will Not Work Properly..
Applications: This Module Works As A Switch With Time Delay On And Off Function, Highly Recommended For Automotive Circuit Modification, And Led Lights, Dc Motors, Pump And Smart Home Control System..
Functions: Supports On Delay And Off Delay Modes, The Delay Time Can Be Adjusted From 0.1S To 1H, The Delay Mode And Delay Time Can Be Set By Shorting Or Opening The Jumper Pins And Rotating The Potentiometer..
Features
- Operating Voltage: DC 12V; Quiescent Current: 5.5mA; Max. Operating Current: 42mA; Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V; Max. Load Current: 10A
- Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer.
- Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly.
- Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.04 pounds
See On Amazon #3
HOMELYLIFE Voltage Converter DC8V-40V to 13.8V 10A Automatic Buck Boost Step Down Up Reducer Waterproof Module Transformer for Golf Cart Club Car
Asin: B07WFMG11F | Model: 8V/40V-13.8V 10A | PartNumber: 8V/40V-13.8V 10A
Assembled With Smart Chip, Features Over-Current /Over-Load /Low-Load /Short-Circuit /Over-Heat Intelligent Protection.
These Voltage Converters Are Excellent Power Transformers, Can Work Safely And Reliable In -40°C~80°C Range. And All Converters Are Offered 1 Year Replacement Assurance.
Compact Aluminium Shell With Epoxy Potting, 100% Waterproof, Anti-Dust, Anti-Shock Protection And Better Heat Dissipation.
Adopt Synchronous Rectification Technology To Improve Conversion Efficiency, Maximum Efficiency:≥95%; Ripple Wave: 50Mv; Starting Delay Time:≤2S.
Features
- Input Voltage: 12V/24V/36V nominal, accept(8V-40V) range; Output Voltage: DC 13.8V 10A 138W.Within the voltage allowable range, it's a voltage reducer and also a booster too.
- Adopt Synchronous Rectification Technology to improve conversion efficiency, Maximum Efficiency: 95%; Ripple Wave: 50Mv; Starting delay time: 2S
- Assembled with smart chip, features Over-current /Over-load /Low-load /Short-circuit /Over-heat intelligent protection
- Compact aluminium shell with epoxy potting, 100% waterproof, anti-dust, anti-shock protection and better heat dissipation
- These voltage converters are excellent power transformers, can work safely and reliable in -40 C~80 C range. And all converters are offered 1 year replacement assurance
- See more on Amazon...
Brand: HOMELYLIFE | Manufacturer: EPBOWPT
Weight: 0.55 pounds
See On Amazon #4
Ethernet Controller Module, TCP/UDP Controller Module with 2-Way Relay Board Delay Switch DC for Replacement of Web Server Electronic Kit
Asin: B0C59G4HHG
✅【Indicator Lights】: The Module Includes A Power Indicator And Individual State Indicators For Each Relay, Allowing Easy Identification Of Relay Status..
✅【Network Configuration】: Module Parameters, Such As The Ip Address, Can Be Conveniently Configured Through The Network, Facilitating Easy Setup And Customization..
✅【Expandability】: The Relay Module Can Be Expanded To Accommodate Up To Eight Outputs, Increasing Versatility And Scalability..
✅【Relay Function】: Onboard Two High-Quality Relays With Diode Circuits For Reliable Switching Operations..
Features
- Control chip : The module utilizes an industrial-grade STC microcontroller as the primary control chip.
- Relay function : Onboard two high-quality relays with diode circuits for reliable switching operations.
- Indicator lights : The module includes a power indicator and individual state indicators for each relay, allowing easy identification of relay status.
- Expandability : The relay module can be expanded to accommodate up to eight outputs, increasing versatility and scalability.
- Network configuration : Module parameters, such as the IP address, can be conveniently configured through the network, facilitating easy setup and customization.
- See more on Amazon...
Brand: DEWIN | Manufacturer: DEWIN
Dimensions: 0.79 x 2.76 x 1.97 inches | Weight: 0.11 pounds
See On Amazon #5
Acxico 2 pcs ESP8266 ESP-01S + 5V WiFi Relay Module Smart Home Remote Control Unlock Board
Asin: B08PB6Q2JF | Ean: 0657835884161 | UPC: 657835884161
Add One More Esp-01S Module. This Smart Relay Module Is Based On The Esp-01S Wifi Module Design. It Can Be Used To Diy Your Own Smart Switch. It Can Be Remotely Controlled By The Mobile Phone App And Provides App And Lua Source Programs. It's Easy To Use Right Away..
We Are Very Grateful For All Customers’ Opinions To Improve Sales, If You Are Not Satisfied, Please Contact Us To Find The Best Solution.
The Package Includes：2 Pcs Esp8266 Esp-01S Relay Module, Relay Wifi Smart Socket (With Esp-01S).
Strong Driving Ability, Stable And Reliable Performance. High Efficiency, Fine Workmanship, And Durable..
Features
- This module uses genuine relays and normally open interfaces. High stability and low power consumption.
- Strong driving ability, stable and reliable performance. High efficiency, fine workmanship, and durable.
- Add one more ESP-01S module. This smart relay module is based on the ESP-01S WIFI module design. It can be used to DIY your own smart switch. It can be remotely controlled by the mobile phone APP and provides APP and LUA source programs. It's easy to use right away.
- The package includes 2 pcs ESP8266 ESP-01S Relay module, relay WIFI smart socket (with ESP-01S)
- We are very grateful for all customers opinions to improve sales, if you are not satisfied, please contact us to find the best solution
- See more on Amazon...
Brand: Acxico | Manufacturer: Acxico
See On Amazon #6
Power Time Sequence Board 8-Channel QF-S10-8 0.2-4S Adjustable Delay Relay Board Time Sequence Module Electronic Components
Asin: B082MBMY67 | Ean: 0738587160731 | UPC: 738587160731
Time Sequence Board: Passive Output (Ie Dry Contact), Nc-Com (Normally Open-Common) Of The Relay..
Application: Suitable For Stage, Ktv And Other Audio Equipment, To Prevent Erroneous Startup Or Simultaneous Startup To Damage The Equipment..
Using For Time Sharing: Used For Time-Sharing Start Of Power Distribution To Prevent Excessive Starting Current At The Same Time..
0.2-4S Adjustable: 0.2 Seconds-4.0 Seconds Is The Time Adjustment Range..
Features
- 8 CHANNELS: 8 channels power time sequence board, start in sequence and stop in reverse.
- 0.2-4S ADJUSTABLE: 0.2 seconds-4.0 seconds is the time adjustment range.
- TIME SEQUENCE BOARD: Passive output (ie dry contact), NC-COM (normally open-common) of the relay.
- USING FOR TIME SHARING: Used for time-sharing start of power distribution to prevent excessive starting current at the same time.
- APPLICATION: Suitable for stage, KTV and other audio equipment, to prevent erroneous startup or simultaneous startup to damage the equipment.
- See more on Amazon...
Brand: Garosa | Manufacturer: Garosa
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #7
KNACRO 2-Channel 30A Optocoupler Isolation Relay Module Support high and Low Level Trigger Relay Module Relay Board (12V, 2-Channel)
Asin: B07KXLGDNM | Ean: 0724873026430 | UPC: 724873026430
Using Optocoupler Isolation, Strong Anti-Jamming Capability And Stable Performance..
To Ensure Stability, Uses Industrial Grade Pcb Board And 9.5Mm Barrier Terminals..
The Module Can Be Set High Or Low Trigger..
Output Capacity: Within Dc 30V 30A Or Ac 250V 30A..
Features
- 2-channel, DC 12V 30A relay module
- Output capacity: within DC 30V 30A or AC 250V 30A.
- Using optocoupler isolation, strong anti-jamming capability and stable performance.
- The module can be set high or low trigger.
- To ensure stability, uses industrial grade PCB board and 9.5mm barrier terminals.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #8
2PCS G2R-1-E-12VDC Power Relay 12VDC 16A 250VAC 8pin G2R G2R-1-E DC 12V DC12V realys
Asin: B09T5SNN3D | Ean: 6261088714966
Features
- 2PCS G2R-1-E-12VDC POWER relay 12VDC 16A 250VAC 8pin G2R G2R-1-E DC 12V DC12V realys
- See more on Amazon...
Brand: MachineMid | Manufacturer: MachineMid
See On Amazon #9
KNACRO DC 12V 30A 2-Channel Relay Module High Or Low Level Triggering with Optocoupler Isolation Load 30A DC 30V AC 250V for PLC Automation Control, Industrial System Control
Asin: B07896HXV9 | Ean: 0736364870798 | UPC: 736364870798
In Line With International Safety Standards, The Control Area And The Load Area With Isolation Slot..
Product Applications: Plc Automation Equipment Control, Industrial System Control, Logistics Network Control, Home Intelligent Product Control, Electronic Enthusiasts To Develop Experiments, All Kinds Of Circuit Modification..
Each Channle Has A Relay On Led Indication..
With Each Optocoupler Isolation, Anti-Interference Ability..
Features
- Using high-power relay, the maximum control load DC 30V 30A / AC 250V 30A;
- With each optocoupler isolation, anti-interference ability.
- In line with international safety standards, the control area and the load area with isolation slot.
- Each channle has a relay on LED indication.
- Product Applications: PLC automation equipment control, industrial system control, logistics network control, home intelligent product control, electronic enthusiasts to develop experiments, all kinds of circuit modification.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #10
KNACRO 4-Channel DC 12V Relay Module High Low Level Triggering Optocoupler Isolation Load 30A DC 30V AC 250V for PLC Automation Control, Industrial System Control
Asin: B06XRTFFZC | Ean: 0713653013203 | UPC: 713653013203
Using Optocoupler Isolation, Strong Anti-Jamming Capability And Stable Performance..
To Ensure Stability, Uses Industrial Grade Pcb Board And 9.5Mm Barrier Terminals..
The Module Can Be Set High Or Low Trigger..
Output Capacity: Within Dc 30V 30A Or Ac 250V 30A..
Features
- 4-channel, DC 12V 30A relay module
- Output capacity: within DC 30V 30A or AC 250V 30A.
- Using optocoupler isolation, strong anti-jamming capability and stable performance.
- The module can be set high or low trigger.
- To ensure stability, uses industrial grade PCB board and 9.5mm barrier terminals.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #11
KNACRO 12V 2-Channel 10A Relay Module High Low Level Triggering Optocoupler Isolation Load 10A DC 30V AC 250V for PLC Automation Control, Industrial System Control(DC 12V, 2-Channel)
Asin: B07LGWR7RV | Ean: 0724873026812 | UPC: 724873026812
Working Status Indicator Lights Are Conducive To The Safe Use.
Widely Used For All Mcu Control, Industrial Sector, Plc Control, Smart Home Control..
4-Channel Relay Interface Board, Which Can Be Controlled Directly By A Wide Range Of Microcontrollers Such As , Avr, Pic, Arm, Plc, Etc. It Is Also Able To Control Various Appliances And Other Equipments With Large Current..
Standard Interface Can Be Directly Connected With Microcontrollers..
Features
- This relay module is 12V active low. Relay output maximum contact is AC 250V 10A and DC 30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Working status indicator lights are conducive to the safe use
- 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as , AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipments with large current.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #12
HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
Asin: B00LW15A4W | Model: 3-01-0340 | PartNumber: 3-01-0340 | Ean: 0702082655948 | UPC: 702082655948
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move..
The Module Can Be Set By Jumper High Or Low Trigger..
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- The Module can be set by jumper high or low trigger.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #13
Digital Low Voltage Protector Disconnect Switch Cut Off 12V Over-Discharge Protection Module for 12-36V Lead Acid Lithium Battery Low Voltage Cutoff for Solar Panel Lighting System Camper
Asin: B07929Y5SZ | Model: Digital Battery Low Voltage Protection | PartNumber: Digital Battery Low Voltage Protection
【Memory Function】With Power-Off Protection, It Will Save Your Settings In The Event Of An Unexpected Loss Of Power. This Feature Is Crucial For Electronic Devices That Require Specific Configurations, As It Prevents The Loss Of Critical Data And Allows You To Resume Work Where You Left Off..
【Parameter】Board Size: 57 X 42 X 19Mm/2.24 X 1.65 X 0.75Inch(L*W*H); Input Voltage: Dc 12-36V; Accuracy: 0.1V; Power Consumption: <1.5W; Maximum Amperage Before Breaker Trips: 20A.
【Delay Turn-On】That Means, After A Disconnect, The Interval Between Turning On Again. The Time Range That Can Be Set Is 0-999 Seconds.
【Over Discharge Protection】This Battery Controller Provides A High Degree Of Flexibility In Terms Of Discharging Modes And Parameter Settings. Users Can Easily Set The Parameter To Disconnect The Battery Automatically When It Reaches A Preset Voltage, Thus Preventing Over-Discharging And Extending Battery Life. With Its Customizable Parameters, This Battery Controller Allows Users To Tailor Their Power Management System To Their Specific Needs And Preferences..
Features
- NOTE This product is a voltage controller, which turns on and off the output through a relay, which only acts as a switch and cannot change the voltage. It's a protection switch module, not included batteries itself.
- OVER DISCHARGE PROTECTION This battery controller provides a high degree of flexibility in terms of discharging modes and parameter settings. Users can easily set the parameter to disconnect the battery automatically when it reaches a preset voltage, thus preventing over-discharging and extending battery life. With its customizable parameters, this battery controller allows users to tailor their power management system to their specific needs and preferences.
- MEMORY FUNCTION With power-off protection, it will save your settings in the event of an unexpected loss of power. This feature is crucial for electronic devices that require specific configurations, as it prevents the loss of critical data and allows you to resume work where you left off.
- DELAY TURN-ON That means, after a disconnect, the interval between turning on again. The time range that can be set is 0-999 seconds
- PARAMETER Board Size: 57 x 42 x 19mm/2.24 x 1.65 x 0.75inch(L*W*H); Input Voltage: DC 12-36V; Accuracy: 0.1V; Power Consumption: <1.5W; Maximum Amperage before Breaker Trips: 20A
- See more on Amazon...
Brand: IS | Manufacturer: icstation
Dimensions: 0.75 x 2.24 x 1.65 inches
See On Amazon #14
ENDMAN Traffic Light Controller Sequencer with 39+ Sequences 3 Channel 80VAC-260VAC Complete Accessories LED Display
Asin: B09VLJ5779 | Model: RGB-PRO | PartNumber: RGB-PRO | Ean: 0782846082784 | UPC: 782846082784
⭐ Solid State Relay Output - Longer Life.
⭐ Red, Yellow, Green Light Delay Time Is 0-250S.
⭐ Complete Accessories.
⭐ Traffic Light Controller Visual Settings, Settings Are More Concise..
⭐ Traffic Light Controller More Safer - Isolated Power 80-260V.
Features
- Traffic Light Controller Contains 39+ Sequences
- Traffic Light Controller More Safer - Isolated Power 80-260V
- Solid State Relay Output - Longer Life
- Traffic Light Controller Visual Settings, Settings are More Concise.
- Red, Yellow, Green Light Delay Time is 0-250s
- Complete Accessories
- See more on Amazon...
Brand: ENDMAN | Manufacturer: ENDMAN
Weight: 0.20 pounds
Warranty: 1 year.
See On Amazon #15
Generac 7000 50 Amp Smart Management Module - Efficient Load Prioritization and Wire-Free Technology for Reliable Power Management - Lock-Feature and LED Status Display for Convenient Operation, Gray
Asin: B0844LRC8T | Model: 7000 | PartNumber: 7000 | Ean: 0696471070002 | UPC: 696471070002
Enhanced Lock-Out Feature: The Smart Management Modules Include A Lock-Out System, Allowing Specific Loads To Be Blocked When Using Generator Power. This Ensures That Critical Loads Are Powered Consistently, Offering Peace Of Mind During Outages.
Smms Actively Monitor Frequency (Hz), When The Connected Load Demands More Power Than The Generator Or Inverter Capacity, Smm's Initiate Configured Load Management Functions Through Options Like Delay Or Lockout.
Easy Installation: Generac Recommends Your Smart Management Module To Be Installed By A Certified And Licensed Electrician.
Convenient External Led Status: Easily Monitor Load Status Without The Need To Open The Electrical Box. The Smart Management Modules Feature Externally Visible L.E.D. Indicators, Providing Quick And Convenient Power Management During Outages.
Customizable Load Prioritization: Prioritize Essential Items During Outages By Selecting Load Priorities. With Support For Up To 8 Modules Per System, You Have The Flexibility To Manage Multiple Loads Efficiently.
Features
- Efficient Wire-Free Technology: Generac's self-aware smart management modules operate autonomously, shedding managed loads if a frequency drop is detected. The generator recovers smoothly, ensuring uninterrupted power supply
- Customizable Load Prioritization: Prioritize essential items during outages by selecting load priorities. With support for up to 8 modules per system, you have the flexibility to manage multiple loads efficiently
- Enhanced Lock-out Feature: The Smart Management Modules include a lock-out system, allowing specific loads to be blocked when using generator power. This ensures that critical loads are powered consistently, offering peace of mind during outages
- Convenient External LED Status: Easily monitor load status without the need to open the electrical box. The Smart Management Modules feature externally visible L.E.D. indicators, providing quick and convenient power management during outages
- SMMs actively monitor frequency (Hz), when the connected load demands more power than the generator or inverter capacity, SMM's initiate configured load management functions through options like delay or lockout
- Easy Installation: Generac recommends your Smart Management Module to be installed by a certified and licensed electrician
- See more on Amazon...
Brand: Generac | Manufacturer: Generac Power Systems, Inc
Dimensions: 6.17 x 3.70 x 7.06 inches | Weight: 1.95 pounds
Warranty: 3-Year Warranty
See On Amazon #16
12V Electronic Temperature Controller Programmable -50 to 110 Degree Celsius Heating/Cooling Thermostat Control Switch Module NTC Waterproof Sensor Probe Dual Color LED Display Monitor (2 Pieces)
Asin: B08W2BYG2L | Model: Weewooday-Stretch Small-X042 | PartNumber: Weewooday-Stretch Small-X042
Waterproof Design: The Ntc (10K 0.5%) Probe Is Waterproof, And You Can Control The Temperature At Will, Can Also Control Heating Or Cooling According To Different Needs.
Wide Application: The Electronic Thermostat Can Be Widely Applied In Intelligent Home And Industrial Equipment, Suitable For Household Appliances, Automatic Irrigation, Office Machines, Audio, Automobiles, Aquarium, Fish Tank Etc..
Reliable To Use: The Electronic Temperature Control Switch Module Has Been Tested For Consistency And Reliability, And Its Control Accuracy Is 0.1 Degrees Celsius, Backlash Precision Is 0.1 Degrees Celsius With High Temperature Protection.
Dual Color Led Display: This Digital Thermostat Control Module Of Dual Color Led Display, Which Show The Measured Temperature (Red) And Set Temperature (Blue) At The Same Time, Which Can Be Applied For Cooling/ Heating Mode, You Can Test Indoor Or Outdoor Temperature.
Features
- What will receive: you will get 2 pieces of direct-current 12V 200 mA temperature controllers, the measurement temperature is from -50 to 110 (-58 to 230 ), the control and backlash precision: 0.1 Celsius, the refresh rate: 0.5 s, the module size: 48 x 29 x 32 mm/ 1.89 x 1.14 x 1.26 inch, the probe length: 1.5 inches, the cable probe length: 1 ft
- Dual color LED display: this digital thermostat control module of dual color LED display, which show the measured temperature (red) and set temperature (blue) at the same time, which can be applied for cooling/ heating mode, you can test indoor or outdoor temperature
- Waterproof design: the NTC (10K 0.5%) probe is waterproof, and you can control the temperature at will, can also control heating or cooling according to different needs
- Reliable to use: the electronic temperature control switch module has been tested for consistency and reliability, and its control accuracy is 0.1 degrees Celsius, backlash precision is 0.1 degrees Celsius with high temperature protection
- Wide application: the electronic thermostat can be widely applied in intelligent home and industrial equipment, suitable for household appliances, automatic irrigation, office machines, audio, automobiles, aquarium, fish tank etc.
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
Dimensions: 1.26 x 1.89 x 1.14 inches
See On Amazon #17
Songhe Capacitive Soil Moisture Sensor Module Corrosion Resistant Moisture Detection Garden Watering for Arduino DIY 3.3~5.5V 5pcs
Asin: B07SYBSHGX | Model: F24 | PartNumber: F24 | Ean: 0738678030462 | UPC: 738678030462
Output Voltage: 0 ~ 3.0 Vdc.
Ph:2.54Mm.
Operating Voltage: 3.3 ~ 5.5 Vdc.
Brand: Songhe | Manufacturer: Songhe
Dimensions: 0.39 x 3.86 x 0.91 inches
See On Amazon #18
InstallGear Car Alarm Security & Keyless Entry System, Trunk Pop with Two 4-Button Remotes - Car Alarm System - Door Lock/Unlock, Keyless Key Fob for Car/Auto
Asin: B01C34QFOK | Model: IGCA | PartNumber: IGCA | Ean: 0789398416920 | UPC: 789398416920
Keyless Entry - With This Keyless Entry System, You Can Easily Lock And Unlock Your Car Doors Without Using Traditional Keys. Instead, You Can Conveniently Access Your Vehicle With The Push Of A Button On The Key Fob Or Remote..
Trunk Pop Function - This Car Alarm And Keyless Entry System Also Comes With A Convenient Trunk Pop Function. With This Feature, You Can Remotely Open The Trunk Of Your Car With Ease, Allowing For Quick And Effortless Access To Your Belongings..
Led Indicator Light - This Car Alarm And Keyless Entry System Features An Led Indicator Light That Provides Important Visual Cues, Keeping You Well-Informed And In Control Of Your Car's Security..
Car Alarm System - This Car Alarm System Is Designed To Protect Your Vehicle From Theft And Unauthorized Access. With Advanced Security Features, It Offers Reliable Protection For Your Valuable Asset..
Features
- TWO 4-BUTTON REMOTES - Our car alarm and keyless entry system includes two 4-button remotes for your convenience. These remotes offer a range of functions, allowing you to easily lock, unlock, and control your car's security system.
- CAR ALARM SYSTEM - This car alarm system is designed to protect your vehicle from theft and unauthorized access. With advanced security features, it offers reliable protection for your valuable asset.
- KEYLESS ENTRY - With this keyless entry system, you can easily lock and unlock your car doors without using traditional keys. Instead, you can conveniently access your vehicle with the push of a button on the key fob or remote.
- LED INDICATOR LIGHT - This car alarm and keyless entry system features an LED indicator light that provides important visual cues, keeping you well-informed and in control of your car's security.
- TRUNK POP FUNCTION - This car alarm and keyless entry system also comes with a convenient trunk pop function. With this feature, you can remotely open the trunk of your car with ease, allowing for quick and effortless access to your belongings.
- See more on Amazon...
Brand: InstallGear | Manufacturer: InstallGear
See On Amazon #19
Teyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5)
Asin: B07XGZSYJV | Model: RK-S1B4-G97L | PartNumber: RK-S1B4-G97L | Ean: 0724545020568 | UPC: 724545020568
Optocoupler Isolator:3V/3.3V Power Relay Module Supports Photocoupler Isolation Control..
30Vdc 250Vac Load：The Power Switch Is Compatible With 10A 250Vac And 10A 30Vdc Load..
Features
- Original Songle Relay
- 30VDC 250VAC Load The power switch is compatible with 10A 250VAC and 10A 30VDC load.
- Optocoupler Isolator:3V/3.3V power relay module supports photocoupler isolation control.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.79 x 2.76 x 0.67 inches | Weight: 0.00 pounds
Warranty: no
See On Amazon #20
iJDMTOY 8-Pin LM449 81980-50030 066500-4650 Electronic LED Flasher Assy Relay Fix Compatible with Lexus Scion or Toyota LED Turn Signal Light Bulbs
Asin: B008C9YS0Y | Model: Fix LED Bulb Hyper Rapid Flashing Issue | PartNumber: Fix LED Bulb Hyper Rapid Flashing Issue
One 8-Pin Lm449 Cf-18 Led Electronic Flasher Relay Module Box, Replace Oem Part # 81980-50030, 81980-53010, 81980-02030, 81980-34020, 066500-4650.
Comparing With The Conventional Load Resistors, The Led Flasher Will Not Generate Any Heat And One Piece Will Solve The Entire Vehicle's Up To 4 Replacement Bulbs Conversion.
Good For Installing The Front Or Back, Or Both Front/Back With Leds, Incandescent Bulbs Or A Mixture Of Both!.
Please Confirm Your Vehicle Has An 8-Pin Flasher With The Same Shape And Configuration Before Buying To Ensure The Fitment! (Check The 2Nd Picture), This Flasher Is Usually Located Underneath The Steering Wheel.
Features
- Compatible with Subaru 13-21 BRZ, 09-18 Forester, 08-16 Impreza, 03-09 Legacy, 05-14 Outback, 08-21 WRX/STI, 13-17 XV Crosstrek; Compatible with Toyota 17-21 86, 03-09 4Runner,, 02-11 Camry, 03-10 Corolla, 07-14 FJ Cruiser, 01-13 Highlander, 01-16 Land Cruiser, 03-13 Matrix, 01-15 Prius, 01-12 RAV4, 01-18 Sequoia, 05-15 Tacoma, 00-06 Tundra, 09-16 Venza, 07-11 Yaris; Compatible with Lexus 11-14 CT, 02-12 ES, 08-13 IS250 IS350, 07-12 LS, 06-16 LX, 99-13 RX; 13-16 FR-S, 05-13 tC, xA, xB, xD, etc
- Please confirm your vehicle has an 8-pin flasher with the same shape and configuration before buying to ensure the fitment! (check the 2nd picture), this flasher is usually located underneath the steering wheel
- One 8-Pin LM449 CF-18 LED electronic flasher relay module box, replace OEM Part # 81980-50030, 81980-53010, 81980-02030, 81980-34020, 066500-4650
- Good for installing the front or back, or both front/back with LEDs, incandescent bulbs or a mixture of both!
- Comparing with the conventional load resistors, the LED flasher will not generate any heat and one piece will solve the entire vehicle's up to 4 replacement bulbs conversion
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
See On Amazon
Looking For Something Else?
Search